Search Results

Search found 5812 results on 233 pages for 'jheadstart generic'.

Page 111/233 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

• How to install audio drivers for Acer Revo nettop?

  - by CT

  I have a Acer Revo nettop. I wiped the XP Home install that came on the machine and put XP Pro on. Acer's support website would lead you to believe that this product does not exist. I know it has a NVIDIA ION LE chipset so I headed over to nvidia.com to download drivers. Ive downloaded and installed the Chipset drivers, Graphics Drivers, and HDMI audio drivers. I have no sound. Under Device Manager there is an unknown Audio Device on High Definition Audio Bus. I do not have an HDMI cable to test hdmi audio. I would just like the standard audio mini-jack output to work. Anyone know of the correct driver or a generic driver that would work? Thanks

  Read the article

• Problem with Jumbo Frames

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: * D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU * Synology DS107+, Firmware 3.0-1337 * Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• WCF REST Question, Binding, Configuration

  - by Ethan McGee

  I am working on a WCF rest interface using json. I have wrapped the service in a windows service to host the service but I am now having trouble getting the service to be callable. I am not sure exactly what is wrong. The basic idea is that I want to host the service on a remote server so I want the service mapped to port localhost:7600 so that it can be invoked by posting data to [server_ip]:7600. The problem is most likely in the configuration file, since I am new to WCF and Rest I wasn't really sure what to type for the configuration so sorry if it's a total mess. I removed several chunks of code and comments to make it a little easier to read. These functions should have no bearing on the service since they call only C# functions. WCF Service Code using System; using System.Collections.Generic; using System.Linq; using System.ServiceModel; using System.ServiceModel.Activation; using System.ServiceModel.Web; using System.Text; namespace PCMiler_Connect { public class ZIP_List_Container { public string[] ZIP_List { get; set; } public string Optimized { get; set; } public string Calc_Type { get; set; } public string Cross_International_Borders { get; set; } public string Use_Kilometers { get; set; } public string Hazard_Level { get; set; } public string OK_To_Change_Destination { get; set; } } [ServiceContract] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)] public class PCMiler_Webservice { [WebInvoke(Method = "POST", UriTemplate = "", ResponseFormat = WebMessageFormat.Json, RequestFormat = WebMessageFormat.Json), OperationContract] public List<string> Calculate_Distance(ZIP_List_Container container) { return new List<string>(){ distance.ToString(), time.ToString() }; } } } XML Config File <?xml version="1.0" encoding="utf-8"?> <configuration> <system.serviceModel> <services> <service name="PCMiler_Connect.PCMiler_Webservice"> <endpoint address="" behaviorConfiguration="jsonBehavior" binding="webHttpBinding" bindingConfiguration="" contract="PCMiler_Connect.PCMiler_Webservice" /> <host> <baseAddresses> <add baseAddress="http://localhost:7600/" /> </baseAddresses> </host> </service> </services> <behaviors> <endpointBehaviors> <behavior name="jsonBehavior"> <enableWebScript/> </behavior> </endpointBehaviors> </behaviors> </system.serviceModel> </configuration> Service Wrapper using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Diagnostics; using System.Linq; using System.ServiceProcess; using System.ServiceModel; using System.Text; using System.Threading; namespace PCMiler_WIN_Service { public partial class Service1 : ServiceBase { ServiceHost host; public Service1() { InitializeComponent(); } protected override void OnStart(string[] args) { host = new ServiceHost(typeof(PCMiler_Connect.PCMiler_Webservice)); Thread thread = new Thread(new ThreadStart(host.Open)); } protected override void OnStop() { if (host != null) { host.Close(); host = null; } } } }

  Read the article

• Multiple Java Versions

  - by user327486

  There are few applications which use Java 1.6.2x , few 1.7.1X and other uses 1.7.4X versions. Since we decided to push all three applications to the user .How to make the applications to use its particular version. There are few web based apps and enterprise apps which requires only a specific set of java versions which is creating issues. Os : Win 7 IE - ver 8 Work around In Progress : Trying to apply a batch file for each app to set the require java version path , but its not the required solution. Do we have any generic way which automatically maps to its required java version , instead of running batch file for each application. Looking forward your valuable suggestions.

  Read the article

• Unmount Mass Storage USB Device from the Command Line in Linux

  - by Casey

  I've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output: $ dmesg | grep sd [20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0 [20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error: $ gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') *** What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed. Some things I've tried already are sdparm and sg3_utils, however I am unfamiliar with them, so it's possible I just didn't find the right command.

  Read the article

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

• Animation cycles in 3ds max 2010

  - by user22902

  Hello, I'm new to animation. I have Max 2010. Basically I have a ball and it has keyframes where it bounces and moves 15 units forward I want a way to be able to add this animation as many times as I want so it bounces and always moves 15 more units. When I shift drag my keyframes, the ball moves 15 units, then quickly goes back and moves the same 15 units. I want it to be like a bip file where it can be added relative to the current position. (Essentially creating a generic ball bounce). Thanks

  Read the article

• locate doesn't find all the files it should

  - by neubert

  I type in locate gmp.h at the prompt and get the following: /usr/src/linux-headers-3.13.0-24/include/linux/igmp.h /usr/src/linux-headers-3.13.0-24/include/uapi/linux/igmp.h /usr/src/linux-headers-3.13.0-24-generic/include/linux/igmp.h But when I do ls /usr/include/x86-64-linux-gnu/ I see this: a.out.h asm bits c++ fpu_control.h gmp.h gnu ieee754.h sys Why isn't locate locating /usr/include/x86-64-linux-gnu/gmp.h? edit: ls -l /usr/include/x64-64-linux-gnu/gmp.h says this: ls: cannot access /usr/include/x64-64-linux-gnu/gmp.h: No such file or diretory Why would ls /usr/include/x86-64-linux-gnu/ say it exists when ls -l /usr/include/x64-64-linux-gnu/gmp.h says it doesn't? A screenshot:

  Read the article

• Encoding movie files into h264

  - by Shiki

  Found some topics about archiving into h264, but those were about the generic questions (does it worth it, which codec to use.) I want to use h264 (with CUDA (if possible)). So far I only found Avidemux a usable encoder with x264 but it makes an unwatchable video file after the encoding (using the best profile, all setting maxed out), really blurry. Please write down detailed what to use, where to get it (if its free, doesnt matter), what to set, etc. Thanks in advance. (OS: Windows 7 ulti x64, VGA is VP2 capable with CUDA GTX260 XFX) Of course, if there is an up to date duplicate, just comment with the link and I'll remove the question ASAP.

  Read the article

• How to resolve 'Error Dependency is not satisfiable: libascound2' on ubuntu

  - by michael

  Hi, I am trying to install skype-ubuntu-intrepid_2.1.0.91-1.i386.deb on ubuntu 8.04: But in the Package installer, I get 'Error Dependency is not satisfiable: libascound2'. And I have tried. $ sudo apt-get install libasound2 [sudo] password for novarra: Reading package lists... Done Building dependency tree Reading state information... Done libasound2 is already the newest version. The following packages were automatically installed and are no longer required: linux-headers-2.6.24-24-generic libdns35 linux-headers-2.6.24-24 Use 'apt-get autoremove' to remove them. I appreciate if anyone can help me with it.

  Read the article

• In *nix, how to determine which filesystem a particular file is on?

  - by smokris

  In a generic, modern unix environment (say, GNU/Linux, GNU/Solaris, or Mac OS X), is there a good way to determine which mountpoint and filesystem-type a particular absolute file path is on? I suppose I could execute the mount command and manually parse the output of that and string-compare it with my file path, but before I do that I'm wondering if there's a more elegant way. I'm developing a BASH script that makes use of extended attributes, and want to make it Do The Right Thing (to the small extent that it is possible) for a variety of filesystems and host environments.

  Read the article

• Opening an oracle database crashes the service

  - by tundal45

  I am experiencing a weird issue with Oracle where the service started fine after a crash. The database mount went fine as well. However, when I issue alter database open; command, the database does not open, gives a generic cannot connect to the database error & crashes the service. Oracle support has not seen this issue before so it's pretty scary. The fact that there are no logs that give any leads as to what could be causing this is also scary. I was wondering if good folks over at Server Fault had seen something like this or have some insights on things that I could try. It's Oracle 10g running on Windows Server 2003. Thanks, Ashish

  Read the article

• How can I have APF block script kiddies that mod_security detects?

  - by Gaia

  In one of the vhosts' error_log I found thousands of lines like these, all from the same IP: [Mon Apr 19 08:15:59 2010] [error] [client 61.147.67.206] mod_security: Access denied with code 403. Pattern match "(chr|fwrite|fopen|system|e?chr|passthru|popen|proc_open|shell_exec|exec|proc_nice|proc_terminate|proc_get_status|proc_close|pfsockopen|leak|apache_child_terminate|posix_kill|posix_mkfifo|posix_setpgid|posix_setsid|posix_setuid|phpinfo)\\\\(.*\\\\)\\\\;" at THE_REQUEST [id "330001"] [rev "1"] [msg "Generic PHP exploit pattern denied"] [severity "CRITICAL"] [hostname "x.x.x.x"] [uri "//webmail/config.inc.php?p=phpinfo();"] Given how obvious the situation is, how come mod_security isnt automatically adding at least that IP to deny rules? There is no way someone hasnt thought of this before...

  Read the article

• Putting codes in email subjects

  - by Christian W

  We send out large quantities of email to our customers (work environment surveys). Sometimes our mailinglist for a client isn't quite up to date and we get bounce mails (address not found and such). However, since these all bounce back to the same address it's difficult to keep track on which bounce belongs to which client. (The email subject is usually pretty generic, like "Welcome to the work environment survey") This is why I would like to insert a identifier in the subject line of the email. So the subject would be "Welcome to the work environment survey (1234)" where 1234 is a number identifying the client/survey. We already rank pretty high because of the way our mailer handles sending the mails. Usually we contact the clients it-dept to get them to whitelist us in their firewall/spamfilter. Would this increase our spamscore in spamfilters?

  Read the article

• Getting Correct Edition of Office 2007 from Serial Key

  - by Lloyd Sparkes

  I have been asked by a Client to refresh one of their Machines. To do this i managed to get Windows XP Setup to run in Repair mode, and while in setup i ran a serial key grabber, which grabbed the key for Office 2007 The only thing is that the key grabber didnt tell me what edition of Office 2007 was installed. I have aqquired a number of ISO's for the different editions (Home & Student, Standard, Professional, Ultimate) but the key doesnt work in any of them. Is there a way to get the edition from the Serial Key, or is there a generic ISO that will install any edition depending on the Serial Key?

  Read the article

• Windows XP Disc: corrupt or not corrupt?

  - by Wesley

  Hi all, I just finished one of my builds and am trying to install Windows XP onto it. Here are the specs beforehand... Intel Pentium 4 Northwood 2.4 GHz (512KB L2, 533MHz FSB) QDI Superb 4 Motherboard 2x 1GB PC3200 DDR RAM Seagate 80GB IDE HDD Bestec 250W PSU 16MB NVIDIA TNT2 Pro Samsung DVD-ROM USB 2.0 PCI Card Generic PCI Modem The issue right now is that when I'm running through the Windows Setup from my XP Pro SP3 disc, partway through the setup says that a random file on the disc is corrupt and the computer needs to be restarted. Every time I tried booting it up, a different file was noted as corrupt. However, I tested the same disc on another computer and the Windows XP disc ran to the end of the setup screen without error. I tried this on another computer and the same thing. What could possibly be happening on this one build to cause it errors during the Windows Setup? Thanks in advance.

  Read the article

• Offline Files (CSC) on Windows RT

  - by Aeyoun

  Windows RT does not have the Offline Files service. The Sync Center is also gone. Can it be enabled somehow? or can anyone recommend a replacement? My options are very limited on Windows 8.1 RT. The only thing it seems Microsoft is offering is something called Work Folders. These are only supported in Windows 8.1. I really want a more generic solution so that I can access files on OS X and Linux (like a samba share).

  Read the article

• Minimum power requirement for VGA vs. its working

  - by Shiki

  Got a new XFX GTX260^2 video card. The only problem is the "Minimum power" is 500W on the box. I've got a Chieftec 450AA PSU with just a minimal number of attached stuff (1hdd, WD green; 6gb (4module) ram; dvd writer). Bought a cable for the 6pin power input on the card. Got picture, works in every aspect. Still. Should I get a new PSU (like a Corsair or Antec 600W)? Will the card perform slower with this PSU? (Yeah the last part is a particular question but in I'm also asking in generic. I was wondering about this so many times and I hope we'll put and end for this question for once and for all.)

  Read the article

• Installing maven on Ubuntu by manual download

  - by WebDevHobo

  To install Maven, I downloaded the latest version from the website and then followed these steps: http://maven.apache.org/download.html#Installation The last step, the version control, does not work. It says that 'mvn' is currently not installed and that I should type sudo apt-get install maven2 If I go directly to the mvn file itself, it does work: root@ubuntu:~# /usr/local/apache-maven/apache-maven-2.2.1/bin/mvn --version Apache Maven 2.2.1 (r801777; 2009-08-06 12:16:01-0700) Java version: 1.6.0_21 Java home: /usr/java/jdk1.6.0_21/jre Default locale: en_US, platform encoding: UTF-8 OS name: "linux" version: "2.6.32-25-generic" arch: "i386" Family: "unix" So, what am I doing wrong here? Or what would and apt-get install do extra that I might have forgotten?

  Read the article

• Windows XP runs New Hardware Wizard for usb keyboard and mouse, can't find drivers

  - by Randy Orrison

  I have a PC that up until a couple days ago was working fine. I moved it from one site to another and now when I plug in the USB mouse or keyboard (the same ones that were working previously) XP brings up the New Hardware Wizard. Going through it, the correct keyboard and mouse are identified, but XP can't find the drivers. I've tried manually searching for the driver (using the Have Disk option) - the first file it's looking for is in the c:\i386 directory, but that installs a generic HID mouse device; the system then runs the hardware wizard for a new "unknown" device. The system was SP2, I have installed SP3 in hopes that would help, and I've also downloaded and installed the mouse drivers from Dell's site (there are no specific drivers for the keyboard), with no change. Before I completely reinstall XP, is there anything else I should try?

  Read the article

• Pgpool-regclass gives error when installling

  - by user119720

  I have a problem when installing the pgpool-regclass. When I'm running 'Make',it shows me this kind of error : p,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -I/usr/include/et -Wall -Wmissing-prototypes -Wpointer-arith -Wdeclaration-after-statement -Wendif-labels -Wmissing-format-attribute -Wformat-security -fno-strict-aliasing -fwrapv -fpic -I. -I. -I/usr/pgsql-9.2/include/server -I/usr/pgsql-9.2/include/internal -I/usr/include/et -D_GNU_SOURCE -I/usr/include/libxml2 -I/usr/include -c -o pgpool-regclass.o pgpool-regclass.c pgpool-regclass.c:99:37: error: macro "RangeVarGetRelid" requires 3 arguments, but only 2 given pgpool-regclass.c: In function âpgpool_regclassâ: pgpool-regclass.c:99: error: âRangeVarGetRelidâ undeclared (first use in this function) pgpool-regclass.c:99: error: (Each undeclared identifier is reported only once pgpool-regclass.c:99: error: for each function it appears in.) make: *** [pgpool-regclass.o] Error 1 Can anyone help me to sort this things out?I really appreciate it. Thanks.

  Read the article

• Can somebody help me install this jBPM based workflow management suite?

  - by Eternal Saint

  1.Its a book Workflow Interface software available at sourceforge http://bookworkflowint.sourceforge.net/ Any instructions on installing and configuring it would be great especially in windows, however I can try Linux specific ones as well. I could not find any installation instructions. I posted this in stackoverflow by mistake and was directed here. 2.Can you guys suggest any good scanning/digitization workflow software (document imaging) that I can adopt to my scanner software? Infact even a simple one would do may be based on hotfolders. I just want to be able to track the uniqueid/barcode of the scanned book, its status so that its not scanned again. It books or manuscripts could be in millions page count. I thought of using some kind of generic bug tracking tool, just track a few fields, dont know if its the right choice Thank you very much

  Read the article

• Third monitor randomly defaults to 640 x 480 on startup

  - by andybaird

  I purchased a PowerColor HD 5770 video card so I could get a third monitor working. I have two widescreen monitors, one attached via HDMI and the other attached via DVI. My third monitor is attached from DisplayPort to VGA (using a passive connector like this one) The third monitor is a 19" Hyundai L90D. I was unable to find any Windows 7 (or Vista for that matter) drivers for the monitor, so it's stuck with "Generic Non-PNP Monitor". It's native resolution is 1280 x 1024. Randomly Windows will boot up in the correct native res, but sometimes it boots up in 640 x 480 res. When it does boot up into 640 x 480 res, the screen resolution slider is stuck and I cannot slide it back to 1280 x 1024. I cannot find a pattern for when or why it will do this, I've tried rebooting five or six times in a row at times to get it to boot into native res, but this doesn't always work.

  Read the article

• How do I convert this filetype to pdf?

  - by Gnoupi

  This question is coming back often, and the general answers are very often the same. In an objective to concentrate useful information in one place, here is a community wiki about it. How can I convert this filetype to pdf? This question will have two kind of answers: The generic case, which works for most filetypes. The specific cases, which should be one answer per filetype. Restricting the OS field to Windows, as most of these questions are about this OS. This may change eventually. As it is community wiki, feel free to edit this question to improve it as well.

  Read the article

• Nagios3 check_httpname gives 503 response; from command line I get a 200 response

  - by Michael T. Smith

  We're using Nagios to monitor our site (and a bunch of other stuff.) For some odd reason, when I test out the command /usr/lib/nagios/plugins/check_http -H 'domainname.com' the response that comes back is HTTP/1.1 200 OK but when I set up the service to do it: # Check that domain is running define service { hostgroup_name hostgroup service_description host site check_command check_httpname!domainname.com use generic-service notification_interval 1; set > 0 if you want to be renotified } the response that comes back is HTTP/1.1 503 Service Unavailable. Does anyone know why this would be happening?

  Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >