Search Results

Search found 4308 results on 173 pages for 'vmware infrastructure'.

Page 111/173 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

• TRIM in centos 5.X?

  - by Frank Farmer

  I've got a bunch of centos 5 boxes with Intel X-25 drives (x25-m in dev, x25-e in prod, I think). We're seeing severely degraded disk performance on one of our dev boxes (which easily does 5+ gb of writes every day, meaning we write the full drive's worth of data several times a month). The box in question: Intel x25-m Ext3 (which doesn't support TRIM) centos 5 vmware ESXi Wikipedia mentions that newer versions of hdparm (which centos5 doesn't include) can bulk-TRIM free blocks. This utility also sounds potentially useful: http://blog.patshead.com/2009/12/a-quick-and-dirty-wipersh-fix-for-intel-x25-m.html Disk write performance has dropped to <1 MB/sec while copying a 300 meg directory on this system, as of a month or so ago -- it used to be able to perform the same copy operation at least 5 times faster. What can I do to recover performance on this system?

  Read the article

• Nexenta/OpenSolaris filer kernel panic/crash

  - by ewwhite

  I've an x4540 Sun storage server running NexentaStor Enterprise. It's serving NFS over 10GbE CX4 for several VMWare vSphere hosts. There are 30 virtual machines running. For the past few weeks, I've had random crashes spaced 10-14 days apart. This system used to open OpenSolaris and was stable in that arrangement. The crashes trigger the automated system recovery feature on the hardware, forcing a hard system reset. Here's the output from mdb debugger: panic[cpu5]/thread=ffffff003fefbc60: Deadlock: cycle in blocking chain ffffff003fefb570 genunix:turnstile_block+795 () ffffff003fefb5d0 unix:mutex_vector_enter+261 () ffffff003fefb630 zfs:dbuf_find+5d () ffffff003fefb6c0 zfs:dbuf_hold_impl+59 () ffffff003fefb700 zfs:dbuf_hold+2e () ffffff003fefb780 zfs:dmu_buf_hold+8e () ffffff003fefb820 zfs:zap_lockdir+6d () ffffff003fefb8b0 zfs:zap_update+5b () ffffff003fefb930 zfs:zap_increment+9b () ffffff003fefb9b0 zfs:zap_increment_int+68 () ffffff003fefba10 zfs:do_userquota_update+8a () ffffff003fefba70 zfs:dmu_objset_do_userquota_updates+de () ffffff003fefbaf0 zfs:dsl_pool_sync+112 () ffffff003fefbba0 zfs:spa_sync+37b () ffffff003fefbc40 zfs:txg_sync_thread+247 () ffffff003fefbc50 unix:thread_start+8 () Any ideas what this means?

  Read the article

• tar fails to open .tar file on OS X

  - by denonth

  I need to unarchive a file to the /Developer folder. My file is in /Users/User/Desktop/VMware/Downloads And I am trying tar -xf qt-everywhere-ios-4.8.0-arm7-nossl.tar.gz -C /Developer and keep getting: Lions-Mac:Downloads User$ tar -xf qt-everywhere-ios-4.8.0-arm7-nossl.tar -C /Developer tar: Error opening archive: Failed to open 'qt-everywhere-ios-4.8.0-arm7-nossl.tar' How can I achieve this? Install Qt for iOS SDK The Qt for iOS SDK has been configured to be installed in the default Xcode installation location /Developer. It is not possible to install the SDK into another location without first rebuilding it, as the install location is contained within the qmake executable, and that is built as part of Qt. To install the Qt for iOS SDK, open ‘Terminal’ and type the following from the command­-line: tar –xf qt­-everywhere-­ios­-4.8.0­-xxx.tar.gz –C /Developer (where xxx is an identifier which can be used to determine the build of the iOS SDK eg. arm7-­-nossl) This will install the Qt for iOS SDK into the following path: /Developer/Platforms/iPhoneOS.platform/Developer/usr/share/qt­-everywhere­-ios­-4.8.0

  Read the article

• Xenserver boot error

  - by Adrian

  I'm trying to get Xenserver 5.5 running on a spare computer here, hardware specs: Intel Q6600, 4GB Ram, and Gigabyte GA-P35-DS3R motherboard Xenserver itself installs fine onto a 150GB sata hdd, however it fails to boot whatsoever, giving this garbled mess: http://img697.imageshack.us/img697/9918/biosi.jpg it's not frozen because if I press enter it just prints a different garble and it also says "could not find kernel image". The strangest thing is if I put that hdd in my desktop and assign it to a VMWare desktop vm (under the ESX profile no less) it boots perfectly... leading me to believe there are no problems with the install or the hdd itself. From what I can tell the error seems to be occuring completely seperately to Xenserver, in the bootloader extlinux?. If there was a motherboard compatibility issue I would think it would also have manifested during installation, and the fact the problem seems to be with the booting into Xen makes me doubt this. Any ideas guys? (I'm using Xen because it can do PCI passthrough without VT-d.)

  Read the article

• Error when installing SQL Server 2008 R2 Express

  - by dretzlaff17

  When installing SQL Server 2008 R2 from the command line prompt, I am getting the following error that is recorded in the Summary file. Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20101217_131444\SystemConfigurationCheck_Report.htm Exception summary: The following is an exception stack listing the exceptions in outermost to innermost order Inner exceptions are being indented Exception type: System.ArgumentNullException Message: Value cannot be null. Parameter name: path2 Data: DisableWatson = true Stack: at System.IO.Path.Combine(String path1, String path2) at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPublic.RecomputeDirectoryPaths() at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPublic.Calculate() at Microsoft.SqlServer.Configuration.SetupExtension.FinalCalculateSettingsAction.ExecuteAction(String actionId) at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream) at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun) Has anyone seen this. Here is what I am sending for the command line parameters. /q /ACTION=Install /FEATURES=SQLEngine /SECURITYMODE=SQL /SAPWD="myPassword" /BROWSERSVCSTARTUPTYPE=Automatic /SQLSVCSTARTUPTYPE=Automatic /SQLSVCACCOUNT="NT AUTHORITY\Network Service" /SQLSYSADMINACCOUNTS="BUILTIN\ADMINISTRATORS" /AGTSVCACCOUNT="NT AUTHORITY\Network Service" /IACCEPTSQLSERVERLICENSETERMS

  Read the article

• OCS 2007: Issues with /LiveServer/MCUFactory

  - by routeNpingme

  I'm not really an Office Communications Server expert, but just trying to resolve some seemingly minor issues with a new install... The following error is occurring in the OCS event log, and when I try to visit https://servername:444/LiveServer/MCUFactory in Internet Explorer to test the address, I just get a "page cannot be displayed" error. I can telnet to port 444 on the server and verify that the port is open and listening. Any ideas? Event Type: Error Event Source: OCS MCU Infrastructure Event Category: (1022) Event ID: 61013 Date: 7/28/2009 Time: 8:47:42 AM User: N/A Computer: COMM2 Description: The process DataMCUSvc(1284) failed to send health notifications to the MCU factory at https://servername:444/LiveServer/MCUFactory/. Failure occurrences: 29, since 7/28/2009 8:40:27 AM. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Backup strategy for Windows Server 2008 R2 and Hyper-V

  - by winserveradmin

  I am in the process of planning a Hyper-V deployment with SCVMM 2008 R2. I have several VMs on VMWare Player (temporary solution) for stuff like Sharepoint 2007, 2010, and a couple of other server apps. I want to develop a resilient backup plan for this. On the software side, Data Protection Manager 2010 will support all of the server apps I run (sQL Server 2008 R2, Sharepoint, Exchange, etc). But on the hardware side (storage), what is the best way to go? Drobo seems to have issues with Hyper-V juding by a few threads on here and doesn't support DPM 2010 (which is in beta anyway) but not even the 2007 version (see http://www.drobo.com/support/best_practices.php). What storage device would work well? Do I need a home server or just an external usb drive? Capacity wise, 2tb will probably be best so I can have a small archive and implement a round-robin system. Thanks

  Read the article

• Website Upgrade - Avoid Downtime

  - by nolan.sipos

  I have been requested to investigate how I can reduce the downtime of our website upgrades. We maintain a DNN site with both public facing pages and member only pages. The member only pages are directly linked to our core application database while the public pages are not. Our current process is to redirect website users as soon as the upgrade process begins, which includes Backup of the Prod DB Update Prod DB Update Executables (Application) Upgrade Website Application (If this requires an update) Install Dependencies Upgrade sub systems like communication engine and payment broker Update various configuration files Perform testing of systems Restart all services Allow access to site This process can take from 2 to 8 hours depending on upgrade required, scripts to be run, size of database and number or portals. My initial thoughts are to restrict users to read only pages and any update pages would be unavailable. Could anyone please offer suggestions as to the best practices for what I would think to be a common problem so that we can reduce this down time and if we need infrastructure changes, I can put this to our technical department.

  Read the article

• NIC models for HVM guests in Xen 4.0

  - by Jed Daniels

  Is there a list of NIC models that I should use with various HVM guests in Xen 4.0? Is there even a list of possible choices for the model=field? I'm planning on running both Windows and FreeBSD guests on the particular Xen box that I'm configuring now, and ideally I'd like a setting that can work on both of them and get me gigabit speeds without a lot of extra hassle loading special drivers (similar to VMware's e1000 NIC option). Any suggestions? The vif line I'm currently using in my config is: vif = [ 'type=ioemu,bridge=eth0,model=ne2k_pci,script=vif-ovs' ] This works in my Windows XP SP3 VM, but is only recognized as a 10Mbit interface. Changing to model=e1000 or model=i82557b resulted in Windows not being able to find a driver for the NIC.

  Read the article

• win xp client, win 7 host, only xp drivers

  - by brett

  I have a win 7 64 bit box which has xp on it in a vmware module and also the win7 version. I can use my old usb wifi card under virtual xp as i have the wifi drivers, but apparently the manufacturing company never made any further drivers, nor did it release the source code. Is it possible to get networking between the client and the host, so that my host can browse etc? I thought the microsoft loopback adapter might be the answer but ever example i can find of it's use describes a setup where the host is connected fine and needs to route data to the client as well.

  Read the article

• PCs using certain IP addresses cannot ping out

  - by Steve McCall

  I'm having a very strange problem which I just can't get past. The way our network is set up, we have 2 locations. The main office with all our PCs, and servers/ We are then joined to a local ISP via microwave link and they provide our internet gateway and house an additional storage server for us. All of the network infrastructure is within our office The problem is... When some PCs (and servers) are assigned IP addresses, they cannot ping the gateway or remote server however the remote server can ping the PC. Most of our internal IP addresses work fine but specific ones (e.g. .29) has this problem all the time. There is nothing else using the ip address and no other network problems. When we switch the IP on the PC, it works fine. Please help, I'm going mad. Thanks, Steve

  Read the article

• Routing based on source address in Windows Server 2008 R2

  - by rocku

  Hi, I'm implementing a direct routing load balanced solution using Windows Server 2008 R2 as back-end server. I've configured a loopback interface with the external IP address. This works, I am receiving packets with the external IP address and respond to them appropriately. However our infrastructure requires that traffic which is being load-balanced should go through a different gateway then any other traffic originating from the server, ie. updates etc. So basicly I need to route packets based on source address (external IP) to another gateway. The built-in Windows 'route' command allows routing based on destination address only. I've tried setting a default gateway on the loopback interface and mangled with weak/strong host send/receive parameters on the interfaces, however this didn't work. Is there any way around this, possibly using third party tools?

  Read the article

• Home ZFS based NAS...What processor/chipset to use?

  - by MrBlargityBlarg

  So, I'm building a home/personal NAS. My plan is to expose both SMB fileshares for sharing files/media between hosts, but also to carve an iSCSI target LUN out of it for use by VMWare as a datastore. I want to use ZFS (software RAID) so that means I'll either be using FreeNAS, Solaris Express, or OpenIndiana. My question is basically: How much horsepower do I need? Obviously I/O is going to be my bottleneck but I want to be sure that I am not limiting my I/O because of a slow processor or chipset. So far the hardware plan is to use an Intel i3 and motherboard with one of the H87, Q87, or Z87 chipsets, a SAS controller (JBOD, no RAID) and if budget allows, I'm also hoping to get an SSD for the ZFS L2ARC and ZIL. Does anyone think I could get away with an Intel Atom or cheaper/less-capable processor/chipset than the i3 and [HQZ]87 listed above?

  Read the article

• Cannot Access Web Interface on HP 2510G

  - by Stephen

  I am currently setting up a new infrastructure with HP 2510s as edge switches and an HP E5406 as the main switch. I also have a DHCP and DNS server running on the same network. When i first set up one of my 2510 switches, I gave it a static IP through the console and then went to the web interface to continue my configuration. Later, I realized that I assigned it the wrong IP address, so i went through the web interface and changed the IP address to the correct one. Now, I can't access the web interface. I can telnet to the switch on the new IP address, but the web interface will not load. If I switch from static IP to DHCP, it loads the web interface. Any ideas on what could be causing the web server in the 2510 not to load with the new static IP address?

  Read the article

• Microsoft ISA 2006 Log Extraction Issues

  - by Johandk

  Hi, We have a client running ISA2006 with logs going to MSDE. The MSDE database gets rotated. We have NO control over the client infrastructure. We need to get the logs out to a TEXT file on the server itself which will be forwarded to a remote server by other software we already have in place. My first thought was doing it via Stored Procs. Another option is vbscript? The actual table holding the logs has no primary key or other identifier so I think the dump should be done once a day for the previous day, but ideally it should run several times a day. Any ideas?

  Read the article

• Setting up a NetApp as a simple FC LUN carver

  - by MikeyB

  For a particular application, I want to configure a NetApp filer (7-mode) to be as close as possible to an old-fashioned storage subsystem without snapshots or fancy features. vol create vol_ESX -s volume aggr1 1500M vol options vol_ESX nosnap on vol options vol_ESX nosnapdir on vol options vol_ESX fractional_reserve 0 snap sched vol_ESX 0 0 0 snap reserve vol_ESX 0 # Ensure no snapshots exist on vol_ESX snap list vol_ESX # Create a LUN or multiple LUNs that take up the entire volume lun create -s 1565523968 -t vmware /vol/vol_ESX/lun0 lun map /vol/vol_ESX/lun0 challenger Is this safe? Is this the Best Way of doing what I'm trying to accomplish? Is there anything else I should set?

  Read the article

• Barracuda spam filter alternative - virtualization/appliance friendly?

  - by ewwhite

  I've sold and deployed Barracuda spam and web filters for years. I've always thought that the functionality was good (Barracuda Central, easy interface, effective filtering), but the hardware on the entry to midrange units is a weak point. They have single power supplies, no RAID and limited monitoring support. Personally, I think Barracuda would make a killing selling their software as a VMWare appliance, but I'm looking for something similar that I can deploy as a consultant, but will be easy for customers to manage. It should have support for server-grade hardware or the ability to be deployed as a virtual machine. Is there anything out there that's close?

  Read the article

• What are the benefits of full VDI over Remote Desktop Services?

  - by Doug Chase

  We're talking about piloting VDI here, but the more research I do, the more it seems like it would make more sense just to upgrade and expand our TS (RDS) environment. I feel like you can pull off more sessions per core on RDS than on any VDI solution I've looked at. Is this the case? Is there a decision matrix anywhere describing the benefits of using full virtualized desktops over using a remote desktop farm? We need good video performance for clinical imaging - will this work better on one infrastructure or the other? (Does this question have a specific enough answer for it to be on SF? Regardless, I feel like having this here will be helpful for someone in the future...)

  Read the article

• Multicast doesn't seem to be working on RHEL 5.5

  - by NullUser

  I'm trying to install Oracle Grid Infrastructure on two machines. Their documentation states You must enable multicasting for the cluster on the IP address subnet ranges 224.0.0.0/24 and 230.0.1.0/24 So I ran: route add -net 224.0.0.0/24 dev eth2 route add -net 230.0.1.0/24 dev eth2 route -n produces: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 230.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 224.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 # and others An ifconfig eth2 shows, among other things, UP BROADCAST RUNNING MULTICAST. However, when I run their multicast test utility, it fails me: Test for Multicast address 230.0.1.0 Sep 3 19:40:39 | Multicast Failed for eth2 using address 230.0.1.0:42000 Test for Multicast address 224.0.0.251 Sep 3 19:41:10 | Multicast Failed for eth2 using address 224.0.0.251:42001 What am I doing wrong?

  Read the article

• Can I provision half a core as a virtual CPU?

  - by ramdaz

  I am virtualization newbie. Please advise on these questions. Please note using a commercial VM software like Citrix or VMware is not a choice for me. I have at my disposal a couple of 2x 4 core servers with 32 GB RAM. I need to create 16 VMs on each server to test some web applications. Can I provision half a core as a virtual CPU for each VM? To my best knowledge I can't do so on Xen. Is it possible on KVM or some other free open source VM solution? If it's not possible to assign half a core, how do I ensure that uniform processing power is available for all VMs? Since the job is to create separate instances for hosting 16 web apps in a physical server, do you recommend setting up a private cloud using Ubuntu Enterprise Cloud as a better option? Is there HA solution under KVM, like Remus for Xen?

  Read the article

• Why do the IP addresses randomly change?

  - by GiddyUpHorsey

  I have a network with the following: Cable modem with static IP address Router Desktop - Win 7 VM Host - VMware ESXi 4.0 A couple of VM Guests - Windows Every now and then my Win 7 PC is unable to access some of the VMs. When I ping the VMs by their domain name their IP address shows up as the IP address of the cable modem. Sometimes I can fix it by running ipconfig /flushdns. The IP address will reset back to what it was supposed to be, but occasionally it wont work. Why does this happen and how can I fix it?

  Read the article

• Using Find, Grep, Awk, or Sed To Rename Server After Cloning

  - by ServerChecker

  My client tells me they have cloned a VM in VMWare of an Ubuntu Linux server. Now it's my job to get into all the files and find out what still has the old server name of "bishop" and change it to something else. Also, the IP address is changed and I need to search for that too. How would you typically use find, grep, awk, or sed to find these files and then change them rapidly? In the end, I want to make a Bash script. Of course, I'm not expecting you to tell me every file, but just want to know the technique for finding files with "x" in it and then switching that rapidly with "y".

  Read the article

• PPTP network for server backend LAN?

  - by Sebastian Hoitz

  Here is our problem: We have several webservers, which should be reached from public. The database servers that store the data for the web apps on those webservers though shall not have a public IP. So, since I want to be able to connect to the SQL servers using ssh for example, and those servers need to talk with each other, I had this idea: Internet | ------------------ | | Webserver 1 Webserver 2 Database Server | | | -------------- vLAN -------------- | PPTP | Workstation (my PC) My idea was that I can connect to the vLAN using PPTP so that I have access to all servers in that LAN, but the database server remains unvisible to the public. Is this infrastructure a good idea?

  Read the article

• HP DL160 vs DL360 for virtualization

  - by Chris

  Hi, We're planning to consolidate our infrastructure (a dozen servers). We'll buy two or three identical new servers who will be setup as a XenServer pool. Load balancing and HA tools will monitor the pool and vMotion VMs in case of failure/overload. I know that the DL100 series of HP servers is cheaper than the DL300 serie (in every sense of the word). As we don't need local storage (we have a SAN) and can live with a temporary down server (provided that Xen Server HA tools work as advertized), what are the downsides going with the DL100 serie ? Thanks, Chris

  Read the article

• Having XP VM use my host OSX ssh tunnel to connect to a remote site?

  - by Manachi

  I am using Mac OSX and have Windows XP running on VMWare Fusion. I'm creating an ssh tunnel from OSX to a remote server, and then trying to have Windows XP use that tunnel (I actually use a program called Proxifier on XP to filter my XP MS SQL Server traffic through that tunnel) Note that I can successfully create an ssh tunnel (on port 9333) from the XP putty to the remote host, and have SQL Server Proxify through that tunnel and it all works correctly. However when I try to set up the tunnel in OSX, and have Proxifier in XP point to the OSX tunnel instead of localhost, it doesn't seem to connect. Here is the OSX command i'm using to create the tunnel: ssh -i /my/key -p 9001 -D 9333 -g me@remotehostname Then I set my XP proxifier to point to macosxhostname:9333 (instead of the previous localhost:9333 which worked corrently when using putty) Any suggestions on what I may have missed? My XP firewall is turned off while setting this up.

  Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >