Search Results

Search found 14059 results on 563 pages for 'ria services'.

Page 112/563 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• why does and EBS volumes mounted in an Ubuntu 12.04 EC2 instance as /dev/sdh1 appear as /dev/xvdh1?

  - by Andres

  When mounting an EBS volume on ubuntu specified as /dev/sdh1 it actually mounts it at /dev/xvdh1. The aws console still thinks it's mounted at /dev/sdh1 so it took a while to realize that it was actually mounted, just in the wrong place I ran into this problem a long time ago using ubuntu on ec2. I just ran into it again https://forums.aws.amazon.com/post!reply.jspa?messageID=351382 and it seems like I'm not alone: https://forums.aws.amazon.com/thread.jspa?threadID=68957&tstart=0 I haven't found a good answer as to why this happens or how to fix it. Any ideas?

  Read the article

• AWS RDS Timeout

  - by warder57

  I know next to nothing about networking/servers. So I'm assuming I'm missing something obvious. All of the resources I can find on this, either don't work or are outdated. I created a brand new AWS account on the free plan. I created a postgres RDS DB instance. I made sure that this RDS instance is set to publicly accessible. This RDS instance has the default VPC/Security Group settings. In order to connect to this DB from my local machine, I used pgadmin3 and followed the instructions provided on the AWS documentation page. Seen here: http://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/USER_ConnectToPostgreSQLInstance.html I've double checked all of the information required to connect: Host: whatever.whatever.us-west-2.rds.amazonaws.com Port: 5432 Username: USERNAME Password: PASSWORD When I try to connect to the database, my connection fails due to a timeout. (During step 4 in the above guide.) Can anyone point me to whatever I am missing? Thanks in advance

  Read the article

• AWS VPC ELB vs. Custom Load Balancing

  - by CP510

  So I'm wondering if this is a good idea. I have a Amazon AWS VPC setup with a public and private subnets. So I all ready get the Internet Gateway and NAT. I was going to setup all my web servers (Apache2 isntances) and DB servers in the private subnet and use a Load Balancer/Reverse Proxy to pick up requests and send them into the private subnets cluster of servers. My question then, is Amazons ELB's a good use for these, or is it better to setup my own custom instance to handle the public requests and run them through the NAT using nginx or pound? I like the second option just for the sake of having a instance I can log into and check. As well as taking advantage of caching and fail2ban ddos prevention, as well as possibly using fail safes to redirect traffic. But I have no experience with their ELB's, so I thought I'd ask your opinions. Also, if you guys have an opinion on this as well, would using the second option allow me to only have 1 public IP address and be able to route SSH connections through port numbers to respective instances? Thanks in advance!

  Read the article

• Backing up data stored on Amazon S3

  - by Fiver

  I have an EC2 instance running a web server that stores users' uploaded files to S3. The files are written once and never change, but are retrieved occasionally by the users. We will likely accumulate somewhere around 200-500GB of data per year. We would like to ensure this data is safe, particularly from accidental deletions and would like to be able to restore files that were deleted regardless of the reason. I have read about the versioning feature for S3 buckets, but I cannot seem to find if recovery is possible for files with no modification history. See the AWS docs here on versioning: http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectVersioning.html In those examples, they don't show the scenario where data is uploaded, but never modified, and then deleted. Are files deleted in this scenario recoverable? Then, we thought we may just backup the S3 files to Glacier using object lifecycle management: http://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html But, it seems this will not work for us, as the file object is not copied to Glacier but moved to Glacier (more accurately it seems it is an object attribute that is changed, but anyway...). So it seems there is no direct way to backup S3 data, and transferring the data from S3 to local servers may be time-consuming and may incur significant transfer costs over time. Finally, we thought we would create a new bucket every month to serve as a monthly full backup, and copy the original bucket's data to the new one on Day 1. Then using something like duplicity (http://duplicity.nongnu.org/) we would synchronize the backup bucket every night. At the end of the month we would put the backup bucket's contents in Glacier storage, and create a new backup bucket using a new, current copy of the original bucket...and repeat this process. This seems like it would work and minimize the storage / transfer costs, but I'm not sure if duplicity allows bucket-to-bucket transfers directly without bringing data down to the controlling client first. So, I guess there are a couple questions here. First, does S3 versioning allow recovery of files that were never modified? Is there some way to "copy" files from S3 to Glacier that I have missed? Can duplicity or any other tool transfer files between S3 buckets directly to avoid transfer costs? Finally, am I way off the mark in my approach to backing up S3 data? Thanks in advance for any insight you could provide!

  Read the article

• How to configure Amazon Security Groups to achieve multi-tier architecture?

  - by ks78

  What is the preferred way to configure Amazon Security Groups to achieve a multi-tier architecture? Each of my instances has its own Security Group, which I only want to use for rules specific to an instance. I'd like to keep any rules which apply to multiple instances in a separate Security Group, which can then be assigned to instance Security Groups as necessary. As an example, I've setup a group called "admin", which allows administrative access from my IP. I added the "admin" group as the source to each of my instance security groups. However, I still can't access the instances from my IP without adding the rules directly to the instance's group. Am I missing something? Although it seems a multi-tier security architecture should be possible, it doesn't seem to be working.

  Read the article

• Unable to access the WCF service over VPN!

  - by kurozakura

  Heres the scenario, im on a network A, and i use a vpn client to connect network B to access the webservice which can be accessed in network B.Even though im connect to network B , im unable to access the webservice link.Do i need to configure any settings. But if u r originally in network B and even though if u have connected to network A using vpn client, im able to access the webservice link. But the other way isnt working.

  Read the article

• Does Cloud Computing COST a premium? (or is it competitive with shared/managed/co-location)

  - by Pete Alvin

  Since cloud solutions (Google AppEngine, Amazon, etc.) do more for you, at the end of the day do they cost significantly more than doing it "yourself" with co-location hosting, etc. Not just starting out, but when the website is mature and getting many page views a day.

  Read the article

• Options for PCI-DSS on AWS - file integrity monitoring and intrusion detection

  - by Brill Pappin

  I need to deploy some file integrity monitoring and intrusion detections software on AWS instances. I really wanted to use OSSEC, however it does not work well in an environment where servers can auto deploy and shut down based on load, because it requires server managed keys to be generated. Including the agent in the AMI will not allow monitoring as soon as it comes up because of that. There are many options out there, and several are listed in other posts on this site, however none that I've seen so far deal with the unique problems inherent in AWS or cloud based deployments in general. Can anyone point me at some products, preferably open source, that we might use to cover those portions of PCI DSS that require this software? Has anyone else achieved this on AWS?

  Read the article

• Creating url from the cloudfront aws

  - by GroovyUser

  I have my js files which I have uploaded into the Amazon S3 and linked it with the Cloudfront. I got a url something like this : dxxxxxxxx.cloudfront.net But opening that url in my browser ( I'm getting an error ) : <Error> <Code>AccessDenied</Code> <Message>Access Denied</Message> <RequestId>xxxxxx</RequestId> <HostId> xxxxxxxxxxxxxxx </HostId> </Error> But what I want actually is to use the url and add them to my webpage. How could I do that? Thanks in advance.

  Read the article

• What settings need to be changed to allow EC2 instances to use Amazon's Route 53 for DNS?

  - by ks78

  I have a number of Amazon EC2 instances, all running Ubuntu, which I'd like to configure to use Amazon's Route 53. I setup a script, following Shlomo Swidler's article, but ran into script-related issues, which were answered here. Now, I have the script working, but my instances are still not able to access Route 53's DNS. By this I mean, they are not able to resolve hostnames to IP addresses. My instances are currently configured with the DNS server IP address Amazon pushes out to them by default, does that need to be changed when using Route 53? I'm also IP-restricting my instances using the Security Groups. Could that be the problem? Is there a certain IP address or port I should open to allow communication with Route 53? It seems that DNS requests should be originating from my instances so the Security Groups shouldn't be an issue, but I've been wrong before. If anyone has any ideas, I'd really appreciate it.

  Read the article

• What are the steps needed to set up and use security for AWS command line tools?

  - by chris

  I've been trying to set up the AWS command-line tools following Eric's most useful guide at http://alestic.com/2012/09/aws-command-line-tools. I can't seem to find a good how-to for how to generate the x509 certificate and private key, and how that relates to the various security files the guide creates. Update: I have found a couple of links that describe the some steps. These steps seem to work, however I'm not sure if this is secure & the best way to do it: 1) Create a private key openssl genrsa -out my-private-key.pem 2048 2) Create x.509 cert openssl req -new -x509 -key my-private-key.pem -out my-x509-cert.pem -days 365 Hit enter to accept all of the defaults. Then, from the IAM Dashboard, User, select a user & click on the "Security Credentials" tab. Click on "Manage Signing Certificates", then "Upload Signing Certificate", paste in the contents of my-x509-cert.pem, click OK and it should be accepted. One step that is discussed, but not required for me, was the addition and subsequent removal of a pass phrase on the private key. Should I have been prompted for one, and is my cert potentially unsafe because of this?

  Read the article

• Migrating an Active Directory domain controller to AWS

  - by Xavier Hutchinson

  I am required to migrate a Active Directory server into AWS with a couple other servers (SQL and IIS) to create a dev and test environment for our network / development. My plan at this time is to simply rebuild the Active Directory server in AWS from scratch - which is quite time consuming indeed! I was wondering if anyone had a recommendation as to a better and more efficient approach of migrating a copy of a physical Active Directory server to the cloud? The server is Windows Server 2012. Thank you!

  Read the article

• Two threads in a rails initializer file seems to not run them properly

  - by Luccas

  Initially I was using one thread to listen a queue from amazon and works perfectly. aws.rb Thread.new do queue1 = AWS::SQS::Queue.new(SQSADDR['my_queue']) queue1.poll do |msg| ... but now I appended another thread to listen another queue: ... Thread.new do queue2 = AWS::SQS::Queue.new(SQSADDR['my_another_queue']) queue2.poll do |msg| ... and now it seems to not work. Only the last one receives response... I have to join the threads? I can't understand What is going on?

  Read the article

• Debugging logrotate postrotate script

  - by robert

  Following is my logrotate conf. /mnt/je/logs/apache/jesites/web/*.log" { missingok rotate 0 size 5M copytruncate notifempty sharedscripts postrotate /home/bitnami/.conf/compress-and-upload.sh /mnt/je/logs/apache/jesites/web/ web endscript } And compress-and-upload.sh script, #!/bin/sh # Perform Rotated Log File Compression tar -czPf $1/log.gz $1/*.1 # Fetch the instance id from the instance EC2_INSTANCE_ID="`wget -q -O - http://169.254.169.254/latest/meta-data/instance-id`" if [ -z $EC2_INSTANCE_ID ]; then echo "Error: Couldn't fetch Instance ID .. Exiting .." exit; else /usr/local/bin/s3cmd put $1/log.gz s3://xxxx/logs/$(date +%Y)/$(date +%m)/$(date +%d)/$2/$EC2_INSTANCE_ID-$(date +%H:%M:%S)-$2.gz fi # Removing Rotated Compressed Log File rm -f $1/log.gz The files are rotated, but shell script is not executed. I don't know how to debug the postscript. Is there any logfile I chek to see if there is any permission issues. If i directly execute the script from commandline file upload works. Thanks.

  Read the article

• Start jade via batch script as service on windows server 2012 amazon ec2 instance

  - by E. Lüders

  I would like to start the Jade agent platform with a batch script on an windows server ec2 instance as a service. The reason for this is, that I want to start jade automatically at system startup. For creating the service I use nssm. However so far its working fine and the service is created. When I want to start the service I get an error message: Windows could not start the NAME service on Local Computer. The service did not return an error... My batch file contains only one line: java jade.Boot -platform-id P%random% If i execute the script via cmd it works fine. Anybody got an idea why this is not working if I start the batch script as a service?

  Read the article

• cannot reach munin port on other AWS instance

  - by Amedee Van Gasse

  2 AWS instances, in the same region but different availability zones, one is in regular EC2 and the other is in VPC, both have an Elastic IP, both are 64bit Amazon Linux AMI 2014.03.1. Both are running munin-node. The instance in the VPC is running munin-cron. I have added incoming TCP and UDP port 4949 to the security groups of both instances. On the munin node, I added an allow-line with the IP address (regular expression) of the munin server to /etc/munin/munin-node.conf. I bind munin-node to any interface using host *. Then I did sudo service munin-node restart. Then I ran netstat. $ sudo netstat -at | grep munin tcp 0 0 *:munin *:* LISTEN So the port is open there. On the munin server AND on the munin node: $ nmap AMAZON-IP -p 80,4949 | grep tcp 80/tcp open http 4949/tcp closed munin On the munin node: $ nmap localhost -p 80,4949 | grep tcp 80/tcp open http 4949/tcp open munin So from the outside, the http port is open (Apache is running) but the munin port is closed. The node can't even reach the munin port on it's own public IP address, but it can on localhost. I added port 80 as a sanity check, to be sure that there is network connectivity at all. So what am I overlooking here?

  Read the article

• Dynamically loading chef recipies from URLs

  - by andy

  I'm deploying a web app on AWS. I intend to use chef to build AMIs which I'll then put into production. I want to have Chef monitor a URL stored in simpleDB. The URL would point to a tarball in S3. There would be different URLs, one for a config tarball, one for a code tarball. When I update the URL in simpleDB, I want chef to spot this and pull in and apply the configs/deploy the code. Is this possible? Has anything like this been done before or would I need to roll my own code? I think Chef can monitor URLs, but how would be the best way of getting it to load that URL from simpleDB?

  Read the article

• Amazon AWS VPN how to open a port?

  - by Victor Piousbox

  I have a VPN with public and private subnets; I am considering only public subnet for now. The node 10.0.0.23, I can ssh into it. Let's say I want to connect to MySQL on the node using its private address: ubuntu@ip-10-0-0-23:/$ mysql -u root -h 10.0.0.23 ERROR 2003 (HY000): Can't connect to MySQL server on '10.0.0.23' (111) ubuntu@ip-10-0-0-23:/$ mysql -u root -h localhost Welcome to the MySQL monitor. Commands end with ; or \g. --- 8< --- snip --- 8< --- mysql> The port 3306 is not reachable if I use the private IP? My security group allows port 3306 inbound from 0.0.0.0/0 AND from 10.0.0.0/24. Outbound, allowed all. The generic setup done by Amazon through their wizard does not work... I add ACL that allows everything for everybody, still does not work. What am I missing?

  Read the article

• Public DNS Server fails on Windows Amazon EC2

  - by Adroidist

  I have started a new Windows server instance on Amazon EC2. The security group has the following rules: Ports Protocol Source 22 tcp 0.0.0.0/0 80 tcp 0.0.0.0/0 443 tcp 0.0.0.0/0 3389 tcp 0.0.0.0/0 53 udp 0.0.0.0/0 -1 icmp 0.0.0.0/0 I am able to ping the public DNS server of the machine and i can connect to it using Windows Remote Desktop connection. However, when i put in my web browser the public DNS server, it fails to connect. Morever, I used filezilla and putty (and in both I loaded the private key .pem) but i receive connection timed out. I disabled the firewall on both my pc and the instance (which I entered using Remote desktop connection). Can you please tell me what I am missing?

  Read the article

• Authority Information Access local path being ignored

  - by Kevin

  I have a CA set up in Server 2008 R2, and generally it is working, but I can't control the local path/filename it writes its own certificate to for the Authority Information Access publishing. Here's a screen shot of the dialog I'm trying to set this on: From these settings I would expect to get the file: C:\Windows\system32\CertSrv\CertEnroll\DAMNIT.crt But instead I get: C:\Windows\system32\CertSrv\CertEnroll\SERVER.domain.com_My Issuing Authority(1).crt Of course, the actual change shown wouldn't be very useful, but it's illustrative; no matter what path/filename I use, it always lands up in the same place and with the same name. I actually wanted to change the name from <ServerDNSName>_<CaName><CertificateName>.crt to <CaName><CertificateName>.crt, since the latter corresponds to the HTTP URL whereas the former does not. Admittedly, I haven't set up many CAs so perhaps I'm just deluded as to what this dialog is supposed to be setting, but if so this is notoriously bad UI design. (Incidentally, I have a couple other complaints with the same dialog.) What's going on here and is there some way to get the filename pattern I want?

  Read the article

• windows 2008 R2 TS printer security - can't take owership

  - by Ian

  I have a Windows 2008 R2 server with Terminal server role installed. I'm seeing a problem with an ordinary user who is member of local printer operators group on the server. If the user opens a cmd window using ‘run as administrator’ they can run printmanager.msc without needing to enter their password again. In printmanager they can change the ownership of redirected (easy print) printers without problems. If, from the same cmd window, they use subinacl to try and change the onwership of the queue to themselves they get access denied: >subinacl.exe /printer "_#MyPrinter (2 redirected)" /setowner="MyDom\MyUsr" Elapsed Time: 00 00:00:00 Done: 1, Modified 0, Failed 1, Syntax errors 0 Last Done : _#MyPrinter (2 redirected) Last Failed: _#MyPrinter (2 redirected) - OpenPrinter Error : 5 Access denied so, same context, same action but one works and one doesn't. Any ideas for this odd behaviour? I'm using subinacl x86 on an x64 server as I can't find anything more up to date. I've tried with icacls and others but couldn't get them to do anything with printers. EDIT: added after Gregs comments regarding setacl below If I log into the TS server as Testusr and open Admin Tools Printer Admin (as administrator) and then type mydomain\testusr and the testusr's password, then I can change the ownership of the printer queue and set testusr as the owner. However if I open cmd as administrator and, again, type mydomain\testusr and the users password when I try to change the ownership of my redirected printer I get the following: C:\>setacl -on "Bullzip PDF Printer (12 redireccionado)" -ot prn -actn setowner -ownr n:mydom\testusr WARNING: Privilege 'Back up files and directories' could not be enabled. SetACL's powers are restricted. WARNING: Privilege 'Restore files and directories' could not be enabled. SetACL's powers are restricted. INFORMATION: Processing ACL of: <Bullzip PDF Printer (12 redireccionado)> ERROR: Enabling the privilege SeTakeOwnershipPrivilege failed with: No todos los privilegios o grupos a los que se hace referencia son asignados al llamador. [meaning not all referenced privs or groups are assigned to the caller] SetACL finished with error(s): SetACL error message: A privilege could not be enabled maybe I'm getting something wrong but if the built in windows tool can do it with just membership of the 'print operators' group then setacl should be able to as well, no? However setacl seems to depend on other privileges, which in reality are not required to do this.

  Read the article

• Can't authorize a server for Amazon RDS

  - by Parris

  We are attempting to slowly migrate a website over to AWS among other things. We decided the first thing to move was the database. We have some dedicated server with a different hosting provider. We only have one IP. I am having trouble authorizing the ip so that the old server can connect to RDS. It simply hangs for a while while using the mysql cli, then responds: ERROR 2003 (HY000): Can't connect to MySQL server on 'db.address.us-east-1.rds.amazonaws.com' (110) It did work on my laptop though. I am not quite sure what is wrong. I have a feeling I don't quite understand CIDR/IP. I simply took the ip address and tacked on /32 at the end. Then I gleaned some information that it also has to do with subnet mask? ifconfig reports: 255.255.255.0 I found a calculator and the IP changed a bit and had /24 at the end. That still didn't work. One other note... perhaps i dont know enough about the differences between OS. The hosting provider is using centOS, while our development machines are all ubuntu. Any insight would be extremely helpful! THANKS :)

  Read the article

• CPU Utilization LAMP stack

  - by Max

  We've got an ec2 m2.4xlarge running Magento (centos 5.6, httpd 2.2, php 5.2.17 with eaccelerator 0.9.5.3, mysql 5.1.52). Right now we're getting a large traffic spike, and our top looks like this: top - 09:41:29 up 31 days, 1:12, 1 user, load average: 120.01, 129.03, 113.23 Tasks: 1190 total, 18 running, 1172 sleeping, 0 stopped, 0 zombie Cpu(s): 97.3%us, 1.8%sy, 0.0%ni, 0.5%id, 0.0%wa, 0.0%hi, 0.0%si, 0.4%st Mem: 71687720k total, 36898928k used, 34788792k free, 49692k buffers Swap: 880737784k total, 0k used, 880737784k free, 1586524k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2433 mysql 15 0 23.6g 4.5g 7112 S 564.7 6.6 33607:34 mysqld 24046 apache 16 0 411m 65m 28m S 26.4 0.1 0:09.05 httpd 24360 apache 15 0 410m 60m 25m S 26.4 0.1 0:03.65 httpd 24993 apache 16 0 410m 57m 21m S 26.1 0.1 0:01.41 httpd 24838 apache 16 0 428m 74m 20m S 24.8 0.1 0:02.37 httpd 24359 apache 16 0 411m 62m 26m R 22.3 0.1 0:08.12 httpd 23850 apache 15 0 411m 64m 27m S 16.8 0.1 0:14.54 httpd 25229 apache 16 0 404m 46m 17m R 10.2 0.1 0:00.71 httpd 14594 apache 15 0 404m 63m 34m S 8.4 0.1 1:10.26 httpd 24955 apache 16 0 404m 50m 21m R 8.4 0.1 0:01.66 httpd 24313 apache 16 0 399m 46m 22m R 8.1 0.1 0:02.30 httpd 25119 apache 16 0 411m 59m 23m S 6.8 0.1 0:01.45 httpd Questions: Would giving msyqld more memory help it cache queries and react faster? If so, how? Other than splitting mysql and php to separate servers (which we're about to do) is there anything else we could/should be doing? Thanks! UPDATE: Here's our my.cnf along with the output of mysqltuner. It looks like a cache problem. Thanks again! # cat /etc/my.cnf [client] port = **** socket = /var/lib/mysql/mysql.sock [mysqld] datadir=/mnt/persistent/mysql port=**** socket=/var/lib/mysql/mysql.sock key_buffer = 512M max_allowed_packet = 64M table_cache = 1024 sort_buffer_size = 8M read_buffer_size = 4M read_rnd_buffer_size = 2M myisam_sort_buffer_size = 64M thread_cache_size = 128M tmp_table_size = 128M join_buffer_size = 1M query_cache_limit = 2M query_cache_size= 64M query_cache_type = 1 max_connections = 1000 thread_stack = 128K thread_concurrency = 48 log-bin=mysql-bin server-id = 1 wait_timeout = 300 innodb_data_home_dir = /mnt/persistent/mysql/ innodb_data_file_path = ibdata1:10M:autoextend innodb_buffer_pool_size = 20G innodb_additional_mem_pool_size = 20M innodb_log_file_size = 64M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 1 innodb_lock_wait_timeout = 50 innodb_thread_concurrency = 48 ft_min_word_len=3 [myisamchk] ft_min_word_len=3 key_buffer = 128M sort_buffer_size = 128M read_buffer = 2M write_buffer = 2M # ./mysqltuner.pl >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.52-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +Archive -BDB +Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 2G (Tables: 26) [--] Data in InnoDB tables: 749M (Tables: 250) [!!] Total fragmented tables: 262 -------- Security Recommendations ------------------------------------------- -------- Performance Metrics ------------------------------------------------- [--] Up for: 31d 2h 30m 38s (680M q [253.371 qps], 2M conn, TX: 4825B, RX: 236B) [--] Reads / Writes: 89% / 11% [--] Total buffers: 20.6G global + 15.1M per thread (1000 max threads) [OK] Maximum possible memory usage: 35.4G (51% of installed RAM) [OK] Slow queries: 0% (35K/680M) [OK] Highest usage of available connections: 53% (537/1000) [OK] Key buffer size / total MyISAM indexes: 512.0M/457.2M [OK] Key buffer hit rate: 100.0% (9B cached / 264K reads) [OK] Query cache efficiency: 42.3% (260M cached / 615M selects) [!!] Query cache prunes per day: 4384652 [OK] Sorts requiring temporary tables: 0% (1K temp sorts / 38M sorts) [!!] Joins performed without indexes: 100404 [OK] Temporary tables created on disk: 17% (7M on disk / 45M total) [OK] Thread cache hit rate: 99% (537 created / 2M connections) [!!] Table cache hit rate: 0% (1K open / 946K opened) [OK] Open file limit used: 9% (453/5K) [OK] Table locks acquired immediately: 99% (758M immediate / 758M locks) [OK] InnoDB data size / buffer pool: 749.3M/20.0G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Enable the slow query log to troubleshoot bad queries Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Variables to adjust: query_cache_size (> 64M) join_buffer_size (> 1.0M, or always use indexes with joins) table_cache (> 1024)

  Read the article

• Amazon EC2 tools for Debian?

  - by Jonik

  What is the recommended way of getting command-line Amazon EC2 tools on Debian? So, basically the same as this question, but for EC2 instead of S3. Ubuntu has ec2-ami-tools and ec2-api-tools, but I couldn't find equivalent packages for Debian. A blog post titled "Install EC2 AMI & API tools in Debian" talks about installing Amazon's packages outside package management, but that seems a little clumsy.

  Read the article

• Why is awstats reporting my static IP instead of Domain Name?

  - by Austin

  In AWStats under: "Links from an external page (other web sites except search engines)" it has generated a list of pages that had linked to my page. I see pages like: Bing, YouTube, HotFrog, etc.. However, there are many internal links within the pages. Towards the bottom it is reporting as followed: http://72.249.150.9/distributors.php 5 2.4 % http://72.249.150.9/contact/ 5 2.4 % http://72.249.150.9/catalog/ 4 1.9 % http://72.249.150.9/flex-point-hockey-grip.php 5 2.4 % http://72.249.150.9/sticky-grip-foam.php 5 2.4 % http://72.249.150.9/video.php 10 4.8 % http://72.249.150.9/dealers/ 5 2.4 % http://72.249.150.9/feedback/ 5 2.4 % http://72.249.150.9/products.php 10 4.8 % http://72.249.150.9/ergo-hockey-grip.php 5 2.4 %

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >