Search Results

Search found 29043 results on 1162 pages for 'jquery tools'.

Page 1121/1162 | < Previous Page | 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128  | Next Page >

  • Taking a Flying Leap

    - by Lance Shaw
    Yesterday, I went skydiving with three of my children.  It was thrilling, scary, invigorating and exciting. While there is obvious risk involved, the reward and feeling of success was well worth it. You might already be wondering what skydiving would have to with WebCenter, so let me explain. Implementing a skydiving program and becoming an instructor does not happen overnight.  It does not happen with the purchase of the needed technology. Not one of us would go out, buy a parachute, the harnesses, helmet and all the gear and be able to convince anyone that we are now ready to be a skydiving instructor. The fact is that obtaining the technology is merely a small piece of the overall process and so is the case with managing content in your company. You don't just buy the right software (Oracle WebCenter Content) and go to your boss and declare information management success. There is planning, research and effort that goes into deploying software of any kind and especially when it is as mission-critical to the success of your business as Enterprise Content Management. To become a certified skydiving instructor takes at least 3 years of commitment and often longer. In the United States, candidates must complete over 500 solo jumps of their own over a minimum of 36 months and then must complete additional rigorous training under observation.  When you consider the amount of time and effort involved, it's not unlike getting a college degree and anyone that has trusted their lives to one of these instructors will no doubt appreciate their dedication to the curriculum.  Implementing an ECM system won't take that long, but it certainly requires commitment, analysis and consideration. But guess what?  Humans are involved and that means that mistakes can happen and that rules change.  This struck me while reading an excellent post on darkreading.com by Glenn S. Phillips entitled "Mission Impossible: 4 Reasons Compliance is Impossible".  His over-arching point was that with information management and security, environments change and people are involved meaning the work is never done.  He stated that you can never claim your compliance efforts are complete because of the following reasons. People are involved.  And lets face it, some are more trustworthy than others. Change is Constant. There is always some new technology coming along that is disruptive. Consumer grade cloud file sharing and sync tools come to mind here. Compliance is interpreted, not defined.  Laws and the judges that read them are always on the move. Technology is a tool, not a complete solution. There is no magic pill. The skydiving analogy holds true here as well.  Ultimately, a single person packs your parachute.  For obvious reasons, you prefer that this person be trustworthy but there are no absolute guarantees of a 100% error-free scenario.  Weather and wind conditions are never a constant and the best-laid plans for a great day of skydiving are easily disrupted by forces outside of your control.  Rules and regulations vary by location and may be updated at any time and as I mentioned early on, even the best technology on its own will only get you started. The good news is that, like skydiving, with the right technology, the right planning, the right team and a proper understanding of the rules and regulations that govern your industry, your ECM deployment can be a great success.  Failure to plan for any of the 4 factors that Glenn outlined in his article will certainly put your deployment and maybe even your company at risk, so consider them carefully. As a final aside, for those of you who consider skydiving an incredibly dangerous and risky pastime, consider this comparative statistic.  In 2012, the U.S. Parachute Association recorded 19 fatal skydiving accidents in the U.S. out of roughly 3.1 million jumps.  That’s 0.006 fatalities per 1,000 jumps. By comparison, the U.S. National Highway Traffic Safety Administration reports that there were 34,080 deaths due to car accidents in 2012.  Based on the percentages, one could argue that it is safer to jump out of a plane than to drive to the airport where the skydiving will take place. While the way you manage, secure, classify, control, retain and dispose of company files may not carry as much risk as driving or skydiving, it certainly carries risk for the organization when not planned and deployed appropriately.  Consider all the factors involved in your organization as you make your content management plans.  For additional areas of consideration, be sure to download our free whitepaper on the topic entitled "The Top 10 Criteria for Choosing an ECM System" which is available for download here.

    Read the article

  • Computer Networks UNISA - Chap 15 &ndash; Network Management

    - by MarkPearl
    After reading this section you should be able to Understand network management and the importance of documentation, baseline measurements, policies, and regulations to assess and maintain a network’s health. Manage a network’s performance using SNMP-based network management software, system and event logs, and traffic-shaping techniques Identify the reasons for and elements of an asset managements system Plan and follow regular hardware and software maintenance routines Fundamentals of Network Management Network management refers to the assessment, monitoring, and maintenance of all aspects of a network including checking for hardware faults, ensuring high QoS, maintaining records of network assets, etc. Scope of network management differs depending on the size and requirements of the network. All sub topics of network management share the goals of enhancing the efficiency and performance while preventing costly downtime or loss. Documentation The way documentation is stored may vary, but to adequately manage a network one should at least record the following… Physical topology (types of LAN and WAN topologies – ring, star, hybrid) Access method (does it use Ethernet 802.3, token ring, etc.) Protocols Devices (Switches, routers, etc) Operating Systems Applications Configurations (What version of operating system and config files for serve / client software) Baseline Measurements A baseline is a report of the network’s current state of operation. Baseline measurements might include the utilization rate for your network backbone, number of users logged on per day, etc. Baseline measurements allow you to compare future performance increases or decreases caused by network changes or events with past network performance. Obtaining baseline measurements is the only way to know for certain whether a pattern of usage has changed, or whether a network upgrade has made a difference. There are various tools available for measuring baseline performance on a network. Policies, Procedures, and Regulations Following rules helps limit chaos, confusion, and possibly downtime. The following policies and procedures and regulations make for sound network management. Media installations and management (includes designing physical layout of cable, etc.) Network addressing policies (includes choosing and applying a an addressing scheme) Resource sharing and naming conventions (includes rules for logon ID’s) Security related policies Troubleshooting procedures Backup and disaster recovery procedures In addition to internal policies, a network manager must consider external regulatory rules. Fault and Performance Management After documenting every aspect of your network and following policies and best practices, you are ready to asses you networks status on an on going basis. This process includes both performance management and fault management. Network Management Software To accomplish both fault and performance management, organizations often use enterprise-wide network management software. There various software packages that do this, each collect data from multiple networked devices at regular intervals, in a process called polling. Each managed device runs a network management agent. So as not to affect the performance of a device while collecting information, agents do not demand significant processing resources. The definition of a managed devices and their data are collected in a MIB (Management Information Base). Agents communicate information about managed devices via any of several application layer protocols. On modern networks most agents use SNMP which is part of the TCP/IP suite and typically runs over UDP on port 161. Because of the flexibility and sophisticated network management applications are a challenge to configure and fine-tune. One needs to be careful to only collect relevant information and not cause performance issues (i.e. pinging a device every 5 seconds can be a problem with thousands of devices). MRTG (Multi Router Traffic Grapher) is a simple command line utility that uses SNMP to poll devices and collects data in a log file. MRTG can be used with Windows, UNIX and Linux. System and Event Logs Virtually every condition recognized by an operating system can be recorded. This is typically done using event logs. In Windows there is a GUI event log viewer. Similar information is recorded in UNIX and Linux in a system log. Much of the information collected in event logs and syslog files does not point to a problem, even if it is marked with a warning so it is important to filter your logs appropriately to reduce the noise. Traffic Shaping When a network must handle high volumes of network traffic, users benefit from performance management technique called traffic shaping. Traffic shaping involves manipulating certain characteristics of packets, data streams, or connections to manage the type and amount of traffic traversing a network or interface at any moment. Its goals are to assure timely delivery of the most important traffic while offering the best possible performance for all users. Several types of traffic prioritization exist including prioritizing traffic according to any of the following characteristics… Protocol IP address User group DiffServr VLAN tag in a Data Link layer frame Service or application Caching In addition to traffic shaping, a network or host might use caching to improve performance. Caching is the local storage of frequently needed files that would otherwise be obtained from an external source. By keeping files close to the requester, caching allows the user to access those files quickly. The most common type of caching is Web caching, in which Web pages are stored locally. To an ISP, caching is much more than just convenience. It prevents a significant volume of WAN traffic, thus improving performance and saving money. Asset Management Another key component in managing networks is identifying and tracking its hardware. This is called asset management. The first step to asset management is to take an inventory of each node on the network. You will also want to keep records of every piece of software purchased by your organization. Asset management simplifies maintaining and upgrading the network chiefly because you know what the system includes. In addition, asset management provides network administrators with information about the costs and benefits of certain types of hardware or software. Change Management Networks are always in a stage of flux with various aspects including… Software changes and patches Client Upgrades Shared Application Upgrades NOS Upgrades Hardware and Physical Plant Changes Cabling Upgrades Backbone Upgrades For a detailed explanation on each of these read the textbook (Page 750 – 761)

    Read the article

  • Build 2012, some thoughts..

    - by Dennis Vroegop
    I think you probably read my rant about the logistics at Build 2012, as posted here, so I am not going into that anymore. Instead, let’s look at the content. (BTW If you did read that post and want some more info then read Nia Angelina’s post about Build. I have nothing to add to that.) As usual, there were good speakers and some speakers who could benefit from some speaker training. I find it hard to understand why Microsoft allows certain people on stage, people who speak English with such strong accents it’s hard for people, especially from abroad, to understand. Some basic training might be useful for some of them. However, it is nice to see that most speakers are project managers, program managers or even devs on the teams that build the stuff they talk about: there was a lot of knowledge on stage! And that means when you ask questions you get very relevant information. I realize I am not the average audience member here, I am regular speaker myself so I tend to look for other things when I am in a room than most audience members so my opinion might differ from others. All in all the knowledge of the speakers was above average but the presentation skills were most of the times below what I would describe as adequate. But let us look at the contents. Since the official name of the conference is Build Windows 2012 it is not surprising most of the talks were focused on building Windows 8 apps. Next to that, there was a lot of focus on Azure and of course Windows Phone 8 that launched the day before Build started. Most sessions dealt with C# and JavaScript although I did see a tendency to use C++ more. Touch. Well, that was the focus on a lot of sessions, that goes without saying. Microsoft is really betting on Touch these days and being a Touch oriented developer I can only applaud this. The term NUI is getting a bit outdated but the principles behind it certainly aren’t. The sessions did cover quite a lot on how to make your applications easy to use and easy to understand. However, not all is touch nowadays; still the majority of people use keyboard and mouse to interact with their machines (or, as I do, use keyboard, mouse AND touch at the same time). Microsoft understands this and has spend some serious thoughts on this as well. It was all about making your apps run everywhere on all sorts of devices and in all sorts of scenarios. I have seen a couple of sessions focusing on the portable class library and on sharing code between Windows 8 and Windows Phone 8. You get the feeling Microsoft is enabling us devs to write software that will be ubiquitous. They want your stuff to be all over the place and they do anything they can to help. To achieve that goal they provide us with brilliant SDK’s, great tooling, a very, very good backend in the form of Windows Azure (I was particularly impressed by the Mobility part of Azure) and some fantastic hardware. And speaking of hardware: the partners such as Acer, Lenovo and Dell are making hardware that puts Apple to a shame nowadays. To illustrate: in Bellevue (very close to Redmond where Microsoft HQ is) they have the Microsoft Store located very close to the Apple Store, so it’s easy to compare devices. And I have to say: the Microsoft offerings are much, much more appealing that what the Cupertino guys have to offer. That was very visible by the number of people visiting the stores: even on the day that Apple launched the iPad Mini there were more people in the Microsoft store than in the Apple store. So, the future looks like it’s going to be fun. Great hardware (did I mention the Nokia Lumia 920? No? It’s brilliant), great software (Windows 8 is in a league of its own), the best dev tools (Visual Studio 2012 is still the champion here) and a fantastic backend (Azure.. need I say more?). It’s up to us devs to fill up the stores with applications that matches this. To summarize: it is great to be a Windows developer. PS. Did I mention Surface RT? Man….. People were drooling all over it wherever I went. It is fantastic :-) Technorati Tags: Build,Windows 8,Windows Phone,Lumia,Surface,Microsoft

    Read the article

  • Discover What Powers Your Favorite Websites

    - by Matthew Guay
    Have you ever wondered if the site you’re visiting is powered by WordPress or if the webapp you’re using is powered by Ruby on Rails?  With these extensions for Google Chrome, you’ll never have to wonder again. Geeks love digging under the hood to see what makes their favorite apps and sites tick.  But opening the “View Source” window today doesn’t tell you everything there is to know about a website.  Plus, even if you can tell what CMS is powering a website from its source, it can be tedious to dig through lines of code to find what you’re looking for.  Also, the HTML code never tells you what web server a site is running on or what version of PHP it’s using.  With three extensions for Google Chrome you’ll never have to wonder again.  Note that some sites may not give as much information, but still, you’ll find enough data from most sites to be interesting. Discover Web Frameworks and Javascript Libraries with Chrome Sniffer If you want to know what CMS is powering a site or if it’s using Google Analytics or Quantcast, this is the extension for you.  Chrome Sniffer (link below) identifies over 40 different frameworks, and is constantly adding more.  It shows the logo of the main framework on the site on the left of your address bar.  Here wee see Chrome Sniffer noticed that How-To Geek is powered by WordPress.   Click the logo to see other frameworks on the site.  We can see that the site also has Google Analytics and Quantcast.  If you want more information about the framework, click on its logo and the framework’s homepage will open in a new tab. As another example, we can see that the Tumblr Staff blog is powered by Tumblr (of course), the Discus comment system, Quantcast, and the Prototype JavaScript framework. Or here’s a site that’s powered by Drupal, Google Analytics, Mollom spam protection, and jQuery.  Chrome Sniffer definitely uncovers a lot of neat stuff, so if you’re into web frameworks you’re sure to enjoy this extension. Find Out What Web Server The Site is Running On Want to know whether the site you’re looking at is running on IIS or Appache?  The Web Server Notifier extension for Chrome (link below) lets you easily recognize the web server a site is running on by its favicon on the right of the address bar.  Click the icon to see more information. Some web servers will show you a lot of information about their server, including version, operating system, PHP version, OpenSSL version, and more. Others will simply tell you their name. If the site is powered by IIS, you can usually tell the version of Windows Server its running on since the IIS versions are specific to a version of Windows.  Here we see that Microsoft.com is running on the latest and greatest – Windows Server 2008 R2 with IIS 7.5. Discover Web Technologies Powering Sites Wondering if a webapp is powered by Ruby on Rails or ASP.NET?  The Web Technology Notifier extension for Chrome (link below), from the same developer as the Web Server Notifier, will let you easily discover the backend of a site.  You’ll see the technology’s favicon on the right of your address bar, and, as with the other extension, can get more information by clicking the icon. Here we can see that Backpack from 37signals is powered by the Phusion Passenger module to run Ruby on Rails.   Microsoft’s new Docs.com Office Online apps is powered by ASP.NET…   And How-To Geek has PHP running to power WordPress. Conclusion With all these tools at hand, you can find out a lot about your favorite sites.  For example, with all three extensions we can see that How-To Geek runs on WordPress with PHP, uses Google Analytics and Quantcast, and is served by the LightSpeed web server.  Fun info, huh?   Links Download the Chrome Sniffer extension Download the Web Server Notifier extension Download the Web Technology Notifier extension Similar Articles Productive Geek Tips Enjoy a Clean Start Page with New Tab PageEnjoy Image Zooming on Your Favorite Photo Websites in ChromeAdd Your Own Folders to Favorites in Windows 7Find User Scripts for Your Favorite Websites the Easy WayAdd Social Elements to Your Gmail Contacts with Rapportive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

    Read the article

  • Oracle CRM On Demand Release 24 is Generally Available

    - by Richard Lefebvre
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 We are pleased to announce that Oracle CRM On Demand Release 24 is Generally Available as of October 25, 2013 Get smarter, more productive and the best value with Oracle CRM On Demand Release 24. Oracle CRM On Demand continues to be the most complete Software-as-a-Service (SaaS) CRM solution available. Now, with Release 24, organizations of all types and sizes benefit from actionable insight anywhere, anytime, as well as key enhancements in mobility, embedded social, analytics, integration and extensibility, and ease of use.Next Generation Mobile and Desktop Solutions : Oracle CRM On Demand Release 24 offers a complete set of mobile and desktop solutions that improve productivity by enabling reps to access and update information anywhere, anytime. Capabilities include: Oracle CRM On Demand Disconnected Mobile Sales (DMS) – A disconnected native iPad solution, DMS has been further streamlined mobile sales process by adding Structured Product Messaging to record brand specific call objectives, enhancements in HTML5 eDetailing including message response tracking and improvements in administration and configuration such as more field management options for read only fields, role management and enhanced logging. Oracle CRM On Demand Connected Mobile Sales. This add-on mobile service provides a configurable mobile solution on iOS, BlackBerry and now Android devices. You can access data from CRM On Demand in real time with a rich, native user experience, that is comfortable and familiar to current iOS, BlackBerry and Android users. New features also include Single Sign On to enhance security for mobile users.  Oracle CRM On Demand Desktop: This application centralizes essential CRM information in the familiar Microsoft Outlook environment,increasing user adoption and decreasing training costs. Users can manage CRM data while disconnected, then synchronize bi-directionally when they are back on the network. New in Oracle CRM On Demand Desktop Version 3 is the ability to synchronize by Books of Business, and improved Online Lookup. Mobile Browser Support: The following mobile device browsers are now supported: Apple iPhone, Apple iPad, Windows 8 Tablets, and Google Android. Leverage the Social Enterprise Engaging customers via social channels is rapidly becoming a significant key to enhanced customer experience as it provides proactive customer service, targeted messaging and greater intimacy throughout the entire customer lifecycle. Listening to customers on the social channels can identify a customers’ sphere of influence and the real value they bring to their organization, or the impact they can have on the opportunity. Servicing the customer’s need is the first step towards loyalty to a brand, integrating with social channels allows us to maximize brand affinity and virally expand customer engagements thus increasing revenue. Oracle CRM On Demand is leveraging the Social Enterprise through its integration with Oracle’s Social Relationship Management (SRM) product suite by providing out-of-the-box integration with Social Engagement and Monitoring (SEM), Social Marketing (SM) and Oracle Social Network (OSN). With Oracle CRM On Demand Release 24, users are able to create a service request from a social post via SEM and have leads entered on a SM lead form automatically entered into Oracle CRM On Demand along with the campaign, streamlining the lead qualification process. Get Smarter with Actionable Insight The difference between making good decisions and great decisions depends heavily upon the quality, structure, and availability of information at hand. Oracle CRM On Demand Release 24 expands upon its industry-leading analytics capabilities to provide greater business insight than ever before. New capabilities include flexible permissions on analytics reports folders, allowing for read only access to reports, and additional field and object coverage. Get More Productive with Powerful Tools Oracle CRM On Demand Release 24 introduces a new set of powerful capabilities designed to maximize productivity. A significant new feature for customizing Oracle CRM On Demand is a JavaScript API. The JS API allows customers to add new buttons, suppress existing buttons and even change what happens when a user clicks an existing button. Other usability enhancements, such as personalized related information applets, extended case insensitive search provide users with better, more intuitive, experience. Additional privileges for viewing private activities and notes allow administrators to reassign records as needed, and Custom Object management. Workflow has been added to the Order Item object; and now tasks can be assigned to a relative user, such as an Account Owner, allowing more complex business processes to be automated and adhered to. Get the Best Value Oracle CRM On Demand delivers unprecedented value with the broadest set of capabilities from a single-provider solution, the industry’s lowest total cost of ownership, the most on-demand deployment options, the deepest CRM expertise and experience of any CRM provider, and the most secure CRM in the cloud. With Release 24, Oracle CRM On Demand now includes even more enterprise-grade security, integration, and extensibility features, along with enhanced industry editions to save you time and money. New features include: Business Process Administration: A new privilege has been added that allows administrators to override a Business Process Administration rule.This privilege permits users to edit a locked record, or unlock a record, in the event of a material change that needs to be reflected per corporatepolicy. Additionally, the Products Detailed object has been added to Business Process Administration, enabling record locking and logic to be applied. Expanded Integration: Oracle continues to improve Web Services each release, by adding more object coverage enabling customers and partners to easily integrate with CRM On Demand. Bottom Line Oracle CRM On Demand Release 24 enables organizations to get smarter, get more productive, and get the best value, period. For more information on Oracle CRM On Demand Release 24, please visit oracle.com/crmondemand

    Read the article

  • Source Control and SQL Development &ndash; Part 3

    - by Ajarn Mark Caldwell
    In parts one and two of this series, I have been specifically focusing on the latest version of SQL Source Control by Red Gate Software.  But I have been doing source-controlled SQL development for years, long before this product was available, and well before Microsoft came out with Database Projects for Visual Studio.  “So, how does that work?” you may wonder.  Well, let me share some of the details of how we do it where I work… The key to this approach is that everything is done via Transact-SQL script files; either natively written T-SQL, or generated.  My preference is to write all my code by hand, which forces you to become better at your SQL syntax.  But if you really prefer to use the Management Studio GUI to make database changes, you can still do that, and then you use the Generate Scripts feature of the GUI to produce T-SQL scripts afterwards, and store those in your source control system.  You can generate scripts for things like stored procedures and views by right-clicking on the database in the Object Explorer, and Choosing Tasks, Generate Scripts (see figure 1 to the left).  You can also do that for the CREATE scripts for tables, but that does not work when you have a table that is already in production, and you need to make just a simple change, such as adding a new column or index.  In this case, you can use the GUI to make the table changes, and then instead of clicking the Save button, click the Generate Change Script button (). Then, once you have saved the change script, go ahead and execute it on your development database to actually make the change.  I believe that it is important to actually execute the script rather than just click the Save button because this is your first test that your change script is working and you didn’t somehow lose a portion of the change. As you can imagine, all this generating of scripts can get tedious and tempting to skip entirely, so again, I would encourage you to just get in the habit of writing your own Transact-SQL code, and then it is just a matter of remembering to save your work, just like you are in the habit of saving changes to a Word or Excel document before you exit the program. So, now that you have all of these script files, what do you do with them?  Well, we organize ours into folders labeled ChangeScripts, Functions, Views, and StoredProcedures, and those folders are loaded into our source control system.  ChangeScripts contains all of the table and index changes, and anything else that is basically a one-time-only execution.  Of course you want to write your scripts with qualifying logic so that if a script were accidentally run more than once in a database, it would not crash nor corrupt anything; but these scripts are really intended to be run only once in a database. Once you have your initial set of scripts loaded into source control, then making changes, such as altering a stored procedure becomes a simple matter of checking out your CREATE PROCEDURE* script, editing it in SSMS, saving the change, executing the script in order to effect the change in your database, and then checking the script back in to source control.  Of course, this is where the lack of integration for source control systems within SSMS becomes an irritation, because this means that in addition to SSMS, I also have my source control client application running to do the check-out and check-in.  And when you have 800+ procedures like we do, that can be quite tedious to locate the procedure I want to change in source control, check it out, then locate the script file in my working folder, open it in SSMS, do the change, save it, and the go back to source control to check in.  Granted, it is not nearly as burdensome as, say, losing your source code and having to rebuild it from memory, or losing the audit trail that good source control systems provide.  It is worth the effort, and this is how I have been doing development for the last several years. Remember that everything that the SQL Server Management Studio does in modifying your database can also be done in plain Transact-SQL code, and this is what you are storing.  And now I have shown you how you can do it all without spending any extra money.  You already have source control, or can get free, open-source source control systems (almost seems like an oxymoron, doesn’t it) and of course Management Studio is free with your SQL Server database engine software. So, whether you spend the money on tools to make it easier, or not, you now have no excuse for not using source control with your SQL development. * In our current model, the scripts for stored procedures and similar database objects are written with an IF EXISTS…DROP… at the top, followed by the CREATE PROCEDURE… section, and that followed by a section that assigns permissions.  This allows me to run the same script regardless of whether the procedure previously existed in the database.  If the script was only an ALTER PROCEDURE, then it would fail the first time that procedure was deployed to a database, unless you wrote other code to stub it if it did not exist.  There are a few different ways you could organize your scripts for deployment, each with its own trade-offs, but I think it is absolutely critical that whichever way you organize things, you ensure that the same script is run throughout the deployment cycle, and do not allow customizations to creep in between TEST and PROD.  If you do, then you have broken the integrity of your deployment process because what you deployed to PROD was not exactly the same as what was tested in TEST, so you effectively have now released untested code into PROD.

    Read the article

  • Many Different Things Rolled into a Ball

    - by MOSSLover
    Yeah I know I don’t blog much anymore, because life has taken me places that don’t involve the interwebs unfortunately.  I am in the midst of planning two events, starting a non for profit, creating more sessions for various conferences, submitting to various conferences, working a 40 hour a week job, attempting to hang out with boyfriend/friends/family.  So you can see that list does not include this blog sadly that’s how it goes sometimes.  The bottom piece very important over any of the top pieces.  I haven’t seen St. Louis in a while and I get to go back.  I was gone from home for MVP Summit and Best Practices Conference, so the boyfriend and cat didn’t get to see me either for a bit.  Then you have to add in the whole toilet being broken fiasco this week.  Maintenance really thought it would be cool to turn off the ability to flush.  I mean who does that?  Then when we call the owner he comes by turns it on and we figure it was an accident, because well the next day no one came by to tell us there was a leak.  It was all kinds of strangeness and involved me running to other people’s toilets.  As Dan Usher would say, I was a sad panda for a few days.  So I guess I wanted to post a few thoughts here just because I can.  I do not like multiple content editor webparts embedded with html files in numerous pages doing the same thing.  I will tell you why I don’t like these particular webparts and the way they are being used.  First off if you have a bunch of pages with script includes it’s about time you should just dump them into the masterpage.  Why bother finding all 20 pages and changing those pages when you can just use a single masterpage that already exists? The other thing that is bothering me days is screen scraping.  Just don’t do it, because in 2010 you will find the UI is substantially slower.  I understand you are new and you have no idea what to do.  You are also using 2007 am I right?  So then you need to go to codeplex.com and type in a search for SPServices.  Download it, use it, love it and then have it’s babies (well maybe don’t go so far this is not the GRID in Tron). If you have a ton of constants in your code why did you not go in and create a webpart with a bunch of properties and/or link to a configuration list hidden in the browser?  This type of property and list could help you out in the long run.  The power users and administrators can now change the control without you having to compile it over and over again.  It’s good stuff.  Also, you can change the control without compiling it, especially in 2007 where you have to do a farm solution.  In 2010 you can do a sandbox solution I guess, but shouldn’t you make it as easy and supportable as possible for other users? In conclusion I’m an angry person when it comes to viewing something repeatedly and analyzing it in a system.  Now we will move on to the next topic…MVP Summit…So yeah I can’t really talk about particulars, but I can talk about my experience as a person.  Don’t build something up to be cooler than it is only to be dropped from your 10,000 foot perch.  My experience was great, but the content overall was something to be desired.  It’s ok I got to meet a lot of people I would not have met if I had not gone.  Some of it was surreal, such as product group members showing up and talking to us.  It was pretty neat.  Plus I never had the chance to get to that mythical MS Office in Redmond.  Prior to Summit it was like Rainbow Brites unicorn trying taunting me on television when I was a kid.  So I guess with all that said I give it a B.  It was awesome in some way, but lacking in other ways.  The cool part is that I got to go.  Would I have lived without going? Yes, but it was still cool. I could prattle on about other things and make this post massive, but I’m going to pass and give myself a piece of Sunday to play Rockband and do 800 other things.  I hope the two of you who read this blog are well.  I’ll catch you all at another juncture.  Have a good weekend and varying holidays in between. Technorati Tags: SharePoint,MVP Summit,JQuery,Javascript

    Read the article

  • Making your ASP.NET/HTML Websites Indic aware &ndash; accepting Tamil, Telugu, Kannada, Hindi and ot

    - by Harish Ranganathan
    Its been a month since I wrote my last post.  Much of work has been happening around planning for Tech Ed India, the upcoming Virtual TechDays this week as well as our Developer content at the Great Indian Developer Summit 2010.  Its going to be one exciting period starting this week and I am glad I would be able to meet a lot of folks who have written to me personally that they would like to catch up at Tech Ed India. For now, I had a chance to meet the Microsoft India Development Centre team that worked on the Microsoft Indic Language Input Tool (erstwhile Akshara). The team updated me that they have also released the scripts  so that the Indic input feature can be encapsulated into your own websites.  For example, if you are having a web page where you collect user information, you can pretty much make your site indic aware i.e. accept inputs in Tamil, Telugu, Kannada, Hindi etc.,  All you would need to include would be a bunch of scripts onto your web pages and you are ready to make it, like I said, “indic aware” I have built a sample web page that accepts First Name, Last Name, Address and an additional field.  When it comes to accepting indic, sometimes, you may want to avoid the indic input in certain fields and accept it in English.  You can specify the MicrosoftILITWebAttach="false" attribute to the Text Boxes and Text Areas (TextMode=”Multiline” in ASP.NET) so that the particular field automatically switches over to English input.  Similarly, the moment you specify that the TextMode=”Password” to make it as a password field, it automatically ignores all indic recognition and shows the masked dots for the words entered. Note that, this is, when we are going for the Opt-out mode, where we are specifying that by default all the input controls would need indic awareness and we would specify for those controls where it is not required.  The other mode is Opt-in mode where you would need to add a different property to the script definition i.e. attachMode=”optin” .  When we do this, we need to explicitly add the MicrosoftILITWebAttach="true" attribute for every control where we need indic input. I have created a sample web page which accepts First Name, Last Name, Address and an additional input field to demonstrate the “Opt-out”.   You can copy paste this into any of your web pages to check it <form id="form1" runat="server">     <!-- Microsoft Indic Language Input Tool embed code --> <input type="hidden" id="MicrosoftILITWebEmbedInfo" attachMode="optout" value="" /> <script type="text/javascript" src="http://ilit.microsoft.com/bookmarklet/script/Tamil.js" defer="defer"></script>     <div>     <h2>         Welcome to the Registration Page     </h2>     <p>         First Name: <asp:TextBox runat="server" ID="txtFirstName" />         <br />         <br />         Last Name: <asp:TextBox runat="server" ID="txtLastName" />         <br />         <br />         Password:         <asp:TextBox runat="server" ID="txtPassword" TextMode="Password" />         <br />         <br />         Address: <asp:TextBox runat="server" ID="txtAddress" TextMode="MultiLine" Height="100" Width="200" />         <br />         <br />         English Text: <asp:TextBox ID="txtEnglishText" runat="server" MicrosoftILITWebAttach="false" />     </p>     <p>         <!-- Microsoft Indic Language Input Tool attribution image link --> <a style="text-decoration: none" href="http://go.microsoft.com/fwlink/?LinkID=184205&clcid=0x409"><img style="border: 0px" alt="Transliteration by Microsoft" src="http://ilit.microsoft.com/bookmarklet/images/attribution.png"></a>     </p>     </div>     </form> If you note the code snippet above, I have included the scripts in the top with the attachMode set to “optout” and for the last TextBox, I have mentioned the MicrosoftILITWebAttach="false” attribute to make it accept English input.   Additionally, you also need to add the “Microsoft Indic Language Input Tool attribution image” to your web page as a courtesy to the team that developed this feature.  It would basically add a image saying “Transliteration by Microsoft” similar to a Copy Right image.  You can see the screen shot below where I have typed it in Tamil.  In that you will notice that the password field behaves as expected and the last field accepts English Text.  You can also notice the icon that comes in the first textbox that indicates that, the field is going to accept indic text.   This sample is using Tamil, but you can pretty much do it for Hindi, Telugu, Kannada, Marathi, Bengali etc.,   The website for getting the Indic script and other instructions is http://specials.msn.co.in/ilit/WebEmbed.aspx?language=Tamil You can replace the querystring value “Tamil” to other languages as mentioned above to get the respective script. This also works for plain HTML based websites and doesn’t necessarily need you to use ASP.NET to achieve the functionality. Note that, this form is not completely localized.  This is transliterated.  You can add label controls for FirstName, LastName indication etc., and use the Visual Studio tools to localize and get those values from resource files.  In the resource files, you can enter the text in different languages to make this a truly localized page.  If you just want to download the Indic Tool Desktop version (that can be used for typing in Word, Excel, pretty much any input area), you can download it from http://specials.msn.co.in/ilit/  In the same page, there is also a web version where you can type and get text then and there if you dont want to install the desktop version. So, go ahead, download / use them in your websites and enjoy the power of Indic. Cheers !!!

    Read the article

  • How to Apply a Business Card Template to a Contact and Customize it in Outlook 2013

    - by Lori Kaufman
    If you want to add a business card template to an existing contact in Outlook, you can do so without having to enter all of the information again. We will also show you how to customize the layout and format of the text on the card. Microsoft provides a couple of business card templates you can use. We will use their Blue Sky template as an example. To open the archive file for the template you downloaded, double-click on the .cab file. NOTE: You can also use a tool like 7-Zip to open the archive. A new Extract tab becomes available under Compressed Folder Tools and the files in the archive are listed. Select the .vcf file in the list of files. This automatically activates the Extract tab. Click Extract To and select a location or select Choose location if the desired location is not on the drop-down menu. Select a folder in which you want to save the .vcf file on the Copy Items dialog box and click Copy. NOTE: Use the Make New Folder button to create a new folder for the location, if desired. Double-click on the .vcf file that you copied out of the .cab archive file. By default, .vcf files are associated with Outlook so, when you double-click on a .vcf file, it automatically opens in a Contact window in Outlook. Change the Full Name to match the existing contact to which you want to apply this template. Delete the other contact info from the template. If you want to add any additional information not in the existing contact, enter it. Click Save & Close to save the contact with the new template. The Duplicate Contact Detected dialog box displays. To update the existing contact, select the Update information of selected Contact option. Click Update. NOTE: If you want to create a new contact from this template, select the Add new contact option. With the Contacts folder open (the People link on the Navigation Bar), click Business Card in the Current View section of the Home tab. You may notice that not all the fields from your contact display on the business card you just updated. Double-click on the contact to update the contact and the business card. On the Contact window, right-click on the image of the business card and select Edit Business Card from the popup menu. The Edit Business Card dialog box displays. You can change the design of the card, including changing he background color or image. The Fields box allows you to specify which fields display on the business card and in what order. Notice, in our example, that Company is listed below the Full Name, but no text displays on the business card below the name. That’s because we did not enter any information for Company in the Contact. We have information in Job Title. So, we select Company and click Remove to remove that field. Now, we want to add Job Title. First, select the field below which you want to add the new field. We select Full Name to add the Job Title below that. Then, we click Add and select Organization | Job Title from the popup menu to insert the Job Title. To make the Job Title white like the name, we select Job Title in the list of Fields and click the Font Color button in the Edit section. On the Color dialog box, select the color you want to use for the text in the selected field. Click OK. You can also make text bold, italic, or underlined. We chose to make the Job Title bold and the Full Name bold and italic. We also need to remove the Business Phone because this contact only has a mobile phone number. So, we add a Mobile Phone from the Phone submenu. Then, we need to remove enough blank lines so the Mobile Phone is visible on the card. We also added a website and email address and removed more blank lines so they are visible. You can also move text to the right side of the card or make it centered on the card. We also changed the color of the bottom three lines to blue. Click OK to accept your changes and close the dialog box. Your new business card design displays on the Contact window. Click Save & Close to save the changes you made to the business card for this contact and close the Contact window. The final design of the business card displays in the Business Card view on the People screen. If you have a signature that contains the business card for the contact you just updated, you will also need to update the signature by removing the business card and adding it again using the Business Card button in the Signature editor. You can also add the updated Business Card to a signature without the image or without the vCard (.vcf) file.     

    Read the article

  • .NET development on a Retina MacBook Pro with Windows 8

    - by Jeff
    I remember sitting in Building 5 at Microsoft with some of my coworkers, when one of them came in with a shiny new 11” MacBook Air. It was nearly two years ago, and we found it pretty odd that the OEM’s building Windows machines sucked at industrial design in a way that defied logic. While Dell and HP were in a race to the bottom building commodity crap, Apple was staying out of the low-end market completely, and focusing on better design. In the process, they managed to build machines people actually wanted, and maintain an insanely high margin in the process. I stopped buying the commodity crap and custom builds in 2006, when Apple went Intel. As a .NET guy, I was still in it for Microsoft’s stack of development tools, which I found awesome, but had back to back crappy laptops from HP and Dell. After that original 15” MacBook Pro, I also had a Mac Pro tower (that I sold after three years for $1,500!), a 27” iMac, and my favorite, a 17” MacBook Pro (the unibody style) with an SSD added from OWC. The 17” was a little much to carry around because it was heavy, but it sure was nice getting as much as eight hours of battery life, and the screen was amazing. When the rumors started about a 15” model with a “retina” screen inspired by the Air, I made up my mind I wanted one, and ordered it the day it came out. I sold my 17”, after three years, for $750 to a friend who is really enjoying it. I got the base model with the upgrade to 16 gigs of RAM. It feels solid for being so thin, and if you’ve used the third generation iPad or the newer iPhone, you’ll be just as thrilled with the screen resolution. I’m typically getting just over six hours of battery life while running a VM, but Parallels 8 allegedly makes some power improvements, so we’ll see what happens. (It was just released today.) The nice thing about VM’s are that you can run more than one at a time. Primarily I run the Windows 8 VM with four cores (the laptop is quad-core, but has 8 logical cores due to hyperthreading or whatever Intel calls it) and 8 gigs of RAM. I also have a Windows Server 2008 R2 VM I spin up when I need to test stuff in a “real” server environment, and I give it two cores and 4 gigs of RAM. The Windows 8 VM spins up in about 8 seconds. Visual Studio 2012 takes a few more seconds, but count part of that as the “ReSharper tax” as it does its startup magic. The real beauty, the thing I looked most forward to, is that beautifully crisp C# text. Consolas has never looked as good as it does at 10pt. as it does on this display. You know how it looks great at 80pt. when conference speakers demo stuff on a projector? Think that sharpness, only tiny. It’s just gorgeous. Beyond that, everything is just so responsive and fast. Builds of large projects happen in seconds, hundreds of unit tests run in seconds… you just don’t spend a lot of time waiting for stuff. It’s kind of painful to go back to my 27” iMac (which would be better if I put an SSD in it before its third birthday). Are there negatives? A few minor issues, yes. As is the case with OS X, not everything scales right. You’ll see some weirdness at times with splash screens and icons and such. Chrome’s text rendering (in Windows) is apparently not aware of how to deal with higher DPI’s, so text is fuzzy (the OS X version is super sharp, however). You’ll also have to do some fiddling with keyboard settings to use the Windows 8 keyboard shortcuts. Overall, it’s as close to a no-compromise development experience as I’ve ever had. I’m not even going to bother with Boot Camp because the VM route already exceeds my expectations. You definitely get what you pay for. If this one also lasts three years and I can turn around and sell it, it’s worth it for something I use every day.

    Read the article

  • Ransomware: Why This New Malware is So Dangerous and How to Protect Yourself

    - by Chris Hoffman
    Ransomware is a type of malware that tries to extort money from you. One of the nastiest examples, CryptoLocker, takes your files hostage and holds them for ransom, forcing you to pay hundreds of dollars to regain access. Most malware is no longer created by bored teenagers looking to cause some chaos. Much of the current malware is now produced by organized crime for profit and is becoming increasingly sophisticated. How Ransomware Works Not all ransomware is identical. The key thing that makes a piece of malware “ransomware” is that it attempts to extort a direct payment from you. Some ransomware may be disguised. It may function as “scareware,” displaying a pop-up that says something like “Your computer is infected, purchase this product to fix the infection” or “Your computer has been used to download illegal files, pay a fine to continue using your computer.” In other situations, ransomware may be more up-front. It may hook deep into your system, displaying a message saying that it will only go away when you pay money to the ransomware’s creators. This type of malware could be bypassed via malware removal tools or just by reinstalling Windows. Unfortunately, Ransomware is becoming more and more sophisticated. One of the latest examples, CryptoLocker, starts encrypting your personal files as soon as it gains access to your system, preventing access to the files without knowing the encryption key. CryptoLocker then displays a message informing you that your files have been locked with encryption and that you have just a few days to pay up. If you pay them $300, they’ll hand you the encryption key and you can recover your files. CryptoLocker helpfully walks you through choosing a payment method and, after paying, the criminals seem to actually give you a key that you can use to restore your files. You can never be sure that the criminals will keep their end of the deal, of course. It’s not a good idea to pay up when you’re extorted by criminals. On the other hand, businesses that lose their only copy of business-critical data may be tempted to take the risk — and it’s hard to blame them. Protecting Your Files From Ransomware This type of malware is another good example of why backups are essential. You should regularly back up files to an external hard drive or a remote file storage server. If all your copies of your files are on your computer, malware that infects your computer could encrypt them all and restrict access — or even delete them entirely. When backing up files, be sure to back up your personal files to a location where they can’t be written to or erased. For example, place them on a removable hard drive or upload them to a remote backup service like CrashPlan that would allow you to revert to previous versions of files. Don’t just store your backups on an internal hard drive or network share you have write access to. The ransomware could encrypt the files on your connected backup drive or on your network share if you have full write access. Frequent backups are also important. You wouldn’t want to lose a week’s worth of work because you only back up your files every week. This is part of the reason why automated back-up solutions are so convenient. If your files do become locked by ransomware and you don’t have the appropriate backups, you can try recovering them with ShadowExplorer. This tool accesses “Shadow Copies,” which Windows uses for System Restore — they will often contain some personal files. How to Avoid Ransomware Aside from using a proper backup strategy, you can avoid ransomware in the same way you avoid other forms of malware. CryptoLocker has been verified to arrive through email attachments, via the Java plug-in, and installed on computers that are part of the Zeus botnet. Use a good antivirus product that will attempt to stop ransomware in its tracks. Antivirus programs are never perfect and you could be infected even if you run one, but it’s an important layer of defense. Avoid running suspicious files. Ransomware can arrive in .exe files attached to emails, from illicit websites containing pirated software, or anywhere else that malware comes from. Be alert and exercise caution over the files you download and run. Keep your software updated. Using an old version of your web browser, operating system, or a browser plugin can allow malware in through open security holes. If you have Java installed, you should probably uninstall it. For more tips, read our list of important security practices you should be following. Ransomware — CryptoLocker in particular — is brutally efficient and smart. It just wants to get down to business and take your money. Holding your files hostage is an effective way to prevent removal by antivirus programs after it’s taken root, but CryptoLocker is much less scary if you have good backups. This sort of malware demonstrates the importance of backups as well as proper security practices. Unfortunately, CryptoLocker is probably a sign of things to come — it’s the kind of malware we’ll likely be seeing more of in the future.     

    Read the article

  • Updated Agenda for OTN Architect Day Los Angeles (Oct 25)

    - by Bob Rhubart
    Here's the latest information on the session schedule and content for Oracle Technology Network Architect Day in Los Angeles on October 25, 2012. Registration is open, but seating is limited. When: Thursday October 25 12, 2012 8:30am – 5:00pm Where: Sofitel Los Angeles 8555 Beverly Boulevard Los Angeles, CA 90048 Agenda Time Session Title Room 8:30 am - 9:00 am Registration and Continental Breakfast 9:00 am - 9:15 am Welcome and Opening Comments | Bob Rhubart Beverly Ballroom 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossmann Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. Beverly Ballroom 10:00 am - 10:30 am Monitoring and Managing Applications in the Cloud | Basheer Khan Oracle offers a broad portfolio of software and hardware products and services to enable public, private and hybrid clouds to power the enterprise. However, enterprise cloud computing presents new management challenges, that need to be addressed to realize the economic benefits of cloud computing. In this session you will learn about the methods and tools you can use to proactively monitor your end-to-end Oracle Applications environment in the cloud, define service-level objectives, gain insight into your end users, and troubleshoot performance problems from a single console. Beverly Ballroom 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions (pick one) Cloud Computing - Making IT Simple | Dr. James Baty The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. Beverly Ballroom Innovations in Grid Computing with Oracle Coherence | Ashok Aletty Learn how Oracle Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Hollywood Room 11:30 am - 12:15 pm Breakout Sessions (pick one) Enterprise Strategy for Cloud Security | Dave Chappelle Security is high on the list of concerns for many organizations as they evaluate their cloud computing options. This session will examine security in the context of the various forms of cloud computing. We'll consider technical and non-technical aspects of security, and discuss several strategies for cloud computing, from both the consumer and producer perspectives. Beverly Ballroom Oracle Enterprise Manager | Perren Walker This session examines new Oracle Enterprise Manager monitoring, administration, and management features for Oracle Exalogic. It focuses on two management themes: cloud management related to virtualization and applications-to-disk management. For private cloud management, it discusses virtualization management features providing an enhanced set of application deployment capabilities enabling IaaS as well as PaaS interactions. Then from an end-to-end perspective, it covers the specific capabilities and—where applicable—best practices for machine, cloud, middleware, and application administration. Hollywood Room 12:15 pm - 1:15 pm Lunch Beverly Ballroom Lounge 1:15 pm - 2:00 pm Panel Discussion - Q&A with session speakers Beverly Ballroom 2:00 pm - 2:45 pm Breakout Sessions (pick one) Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation will answer the important questions: What exactly is a Cloud, why you need it, what changes it will bring to the enterprise, and what are the key capabilities of a Cloud infrastructure are - using Oracle's Cloud Reference Architecture, which is part of the IT Strategies from Oracle (ITSO) Cloud Enterprise Technology Strategy ETS). Beverly Ballroom 21st Century SOA | Jeff Davies Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. We'll also take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Hollywood Room 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussion Beverly Ballroom 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtables Beverly Ballroom 4:15 pm - 5:00 pm Networking / Reception Beverly Ballroom Lounge Note: Session schedule and content subject to change.

    Read the article

  • Career guidance/advice for Junior-level Software Engineer [closed]

    - by John Do
    I have quite a few questions on my mind, so please bare with me. Please don't feel obligated to answer all of them, any as you choose will do. I'd appreciate if you could share some insight on any of these. Before I begin, some context: I currently have almost two years of professional experience as a Software Engineer, mainly developing software in Java. At this point, I feel that I have reached the peak in my career growth at the current company I am at and therefore I am looking for a new job, ideally again, as a Software Engineer. I have been interviewing for the past few months casually but have not had luck with companies I have a passion for. So, in no particular order - 1) In general, what are your thoughts on having graduate degrees in CS / Software Engineering. How much does it influence a salary increase, and do you think it's beneficial when working on real-world problems? I get the sense that a graduate degree in the field is trivial unless you really have a passion for research. 2) In general, in professional practice, how often had you have to write your own data structures and "complex" algorithms from scratch? In my own work, I have found myself relying mainly on third-party frameworks and the Java standard library to implement solutions as per business requirements. What are your thoughts on this? 3) In terms of resume, I feel the most ambivalent here. I want to be able to "blemish" my resume to a certain extent so that it stands out from others', but at the same time I do not want to over-exagerate my abilities. How do you strike a balance here? For example: I say that I am proficient in Java with data structures and algorithms. This is obviously a subjective and relative statement. I've taken the classes in my undergrad, and I've applied it in my work experience. What I feel as "prociency" can be seen as junior-level to others. How do you know what to say? Most of the time, recruiters (with no technical background) will be looking for keywords that stand out. This leads me to my next question (4). 4) Just from interviewing for the past few months (and getting plenty of rejections), I've come to realize that I may not be as proficient in data structures and algorithms as I thought I was. Do you think it's a good idea to remove the "proficient in java/data structure and algorithms"? I feel that being too hoenst on the resume will impede me from scoring opportunities to even have an interview with top-notch companies. What are your thoughts? 5) What is the absolute "must-have" knowledge going into a technical interview? I've been practicing several algorithmic and data sturcture problems now, and I feel that my abilities to solve arbitrary problems efficiently has not gotten significantly better. Do you think these abilities are something innate - it's either you have in you, or you don't? How can you teach yourself to learn, if you will? 6) How easy is it to go from industry/function to the next? I work mainly with backend technologies and I'm now interested in working with the frontend, i.e javascript,jquery,php or even mobile development. In your own experience, how did you not get pidgeon holed in your career? I feel that the choices you make now ultimately decide your future. As cliche as it sounds, I think it may be true. Here's what I mean: you've worked mainly as a backend engineer, people are interested in you doing the same thing since you've already accumulated experience in that function. How do get experience in a new function if people won't accept you because you don't already have it? It's a catch 22, you see... Are side projects the only real way to help you move from one function to another that you're truly interested in? For example: I could start writing my own mobile applications, even though I've worked mainly on the backend. Thanks so much for the long read. As a relatively new engineer to the real world, I am very humble and would like those who are experienced to shed some light. Thank you so much.

    Read the article

  • JustCode Provides Reflector Alternative

    - by Joe Mayo
    If you've been a loyal Reflector user, you've probably been exposed to the debacle surrounding RedGate's decision to no longer offer a free version.  Since then, the race has begun for a replacement with a provider that would stand by their promises to the community.  Mono has an ongoing free alternative, which has been available for a long time.  However, other vendors are stepping up to the plate, with their own offerings. If Not Reflector, Then What? One of these vendors is Telerik.  In their recent Q1 2011 release of JustCode, Telerik offers a decompilation utility rivaling what we've become accustomed to in Reflector.  Not only does Telerik offer a usable replacement, but they've (in my opinion), produced a product that integrates more naturally with visual Studio than any other product ever has.  Telerik's decompilation process is so easy that the accompanying demo in this post is blindingly short (except for the presence of verbose narrative). If you want to follow along with this demo, you'll need to have Telerik JustCode installed.  If you don't have JustCode yet, you can buy it or download a trial at the Telerik Web site . A Tall Tale; Prove It! With JustCode, you can view code in the .NET Framework or any other 3rd party library (that isn't well obfuscated).  This demo depends on LINQ to Twitter, which you can download from CodePlex.com and create a reference or install the package online as described in my previous post on NuGet.  Regardless of the method, you'll have a project with a reference to LINQ to Twitter.  Use a Console Project if you want to follow along with this demo. Note:  If you've created a Console project, remember to ensure that the Target Framework is set to .NET Framework 4.  The default is .NET Framework 4 Client Profile, which doesn't work with LINQ to Twitter.  You can check by double-clicking the Properties folder on the project and inspecting the Target Framework setting. Next, you'll need to add some code to your program that you want to inspect. Here, I add code to instantiate a TwitterContext, which is like a LINQ to SQL DataContext, but works with Twitter: var l2tCtx = new TwitterContext(); If you're following along add the code above to the Main method, which will look similar to this: using LinqToTwitter; namespace NuGetInstall { class Program { static void Main(string[] args) { var l2tCtx = new TwitterContext(); } } } The code above doesn't really do anything, but it does give something that I can show and demonstrate how JustCode decompilation works. Once the code is in place, click on TwitterContext and press the F12 (Go to Definition) key.  As expected, Visual Studio opens a metadata file with prototypes for the TwitterContext class.  Here's the result: Opening a metadata file is the normal way that Visual Studio works when navigating to the definition of a type where you don't have the code.  The scenario with TwitterContext happens because you don't have the source code to the file.  Visual Studio has always done this and you can experiment by selecting any .NET type, i.e. a string type, and observing that Visual Studio opens a metadata file for the .NET String type. The point I'm making here is that JustCode works the way Visual Studio works and you'll see how this can make your job easier. In the previous figure, you only saw prototypes associated with the code. i.e. Notice that the default constructor is empty.  Again, this is normal because Visual Studio doesn't have the ability to decompile code.  However, that's the purpose of this post; showing you how JustCode fills that gap. To decompile code, right click on TwitterContext in the metadata file and select JustCode Navigate -> Decompile from the context menu.  The shortcut keys are Ctrl+1.  After a brief pause, accompanied by a progress window, you'll see the metadata expand into full decompiled code. Notice below how the default constructor now has code as opposed to the empty member prototype in the original metadata: And Why is This So Different? Again, the big deal is that Telerik JustCode decompilation works in harmony with the way that Visual Studio works.  The navigate to functionality already exists and you can use that, along with a simple context menu option (or shortcut key) to transform prototypes into decompiled code. Telerik is filling the the Reflector/Red Gate gap by providing a supported alternative to decompiling code.  Many people, including myself, used Reflector to decompile code when we were stuck with buggy libraries or insufficient documentation.  Now we have an alternative that's officially supported by a company with an excellent track record for customer (developer) service, Telerik.  Not only that, JustCode has several other IDE productivity tools that make the deal even sweeter. Joe

    Read the article

  • VirtualBox appliance for the Oracle Communications Service Delivery Platform (SDP) Products

    - by chlander
    It's been quite awhile since we last blogged. This blog is written by Leif Lourie, a Curriculum Developer for the Oracle Communications Service Delivery Platform (SDP) products. For the last 8 years, Leif has worked as a Curriculum Developer for many of the telecom-oriented products that Oracle offers. He has been working in the telecom industry for about 25 years and has also worked as a software developer, project manager, and solutions architect. He is currently working on courseware for an upcoming release for one of the Service Delivery Platform products. Thanks to Leif not only for this blog, but for making the VM described in the blog available. Cheryl Lander, Oracle Communications InfoDev Senior Director To be able to download, install and test a product within a day is many times very important for people that are doing the primary evaluation of a software product. If it takes longer, it will require a bigger effort, like a proof-of-concept project with many people involved. Of course, if the product is chosen for a more thorough test, it will probably happen anyway, but then maybe with focus on integration instead of product features. We have a long tradition of creating complex software that is easy to install and test and we have often been praised for the ease of getting our products up and running. One key for this has been that there has always been an installer for Windows, as well as for the production environments that usually are Unix and Linux. And, the windows installer has, in most cases, been released for developing and testing purposes. Lately, this has changed. Our products are very seldom released for the Windows platform, at all. And even the Linux versions are almost always released for 64-bit systems. This is creating problems for many of the people that want to try out our products, since few have access to a 64-bit Linux system of the right platform. Most of us are using a laptop with Windows or Mac OS. Some of us are using Linux or Solaris, but probably a non certified distribution for the product you want to test. My job, among other things, is to develop hands-on practices for our products. For me, it is crucial to have access to environments for installing and using our products. For this reason I have been using virtual machines for many years.I have a ready-made base system, with the necessary tools installed for all the products I create hands-on practices for. Whenever I start working on hands-on practices for a new product or a new version, I just copy the base system and start working with a clean slate. This saves me a lot of time! Now, I would like to start saving time for my favorite student: You! If you are using our products and regularly test new versions you might benefit from the virtual machine that is now available on Oracle Technology Network: The Virtual Machine for the Oracle Communications Service Delivery Platform (SDP) Products. This virtual machine contains an installation of the 64-bit version of Oracle Enterprise Linux, version 6. It also has Oracle Database Express Edition (XE), Oracle Java and Oracle Enterprise Pack for Eclipse installed. By using Oracle VM VirtualBox you may use Windows, OS X, Linux or Solaris on your laptop. VirtualBox can be installed on top of any of these platforms and give you the ability to run virtual machines in your laptop. After downloading and starting the virtual machine you will also need to download the installation files for the product you want to test; for example Oracle Communications Services Gatekeeper or Oracle Communications Online Mediation Controller. In some cases there are lessons and practices available for the products. The freely available courses are listed in Oracle Learning Library as a Collection of Oracle Communications Service Delivery Platform Courses. As time goes by, we will make this list collection bigger. Also, the goal is to update the virtual machine about one to two times per year. So you will always be able to get a well maintained virtual machine for the Service Delivery Platform products from us. We Value Your Feedback If you would like to suggest improvements or report issues on any of the product documentation, curriculum, or training produced by the Oracle Communications Information Development team, you can use these channels: Email [email protected]. Post a comment on this blog. Thanks for reading!

    Read the article

  • AppHarbor - Azure Done Right AKA Heroku for .NET

    - by Robz / Fervent Coder
    Easy and Instant deployments and instant scale for .NET? Awhile back a few of us were looking at Ruby Gems as the answer to package management for .NET. The gems platform supported the concept of DLLs as packages although some changes would have needed to happen to have long term use for the entire community. From that we formed a partnership with some folks at Microsoft to make v2 into something that would meet wider adoption across the community, which people now call NuGet. So now we have the concept of package management. What comes next? Heroku Instant deployments and instant scaling. Stupid simple API. This is Heroku. It doesn’t sound like much, but when you think of how fast you can go from an idea to having someone else tinker with it, you can start to see its power. In literally seconds you can be looking at your rails application deployed and online. Then when you are ready to scale, you can do that. This is power. Some may call this “cloud-computing” or PaaS (Platform as a Service). I first ran into Heroku back in July when I met Nick of RubyGems.org. At the time there was no alternative in the .NET-o-sphere. I don’t count Windows Azure, mostly because it is not simple and I don’t believe there is a free version. Heroku itself would not lend itself well to .NET due to the nature of platforms and each language’s specific needs (solution stack).  So I tucked the idea in the back of my head and moved on. AppHarbor Enters The Scene I’m not sure when I first heard about AppHarbor as a possible .NET version of Heroku. It may have been in November, but I didn’t actually try it until January. I was instantly hooked. AppHarbor is awesome! It still has a ways to go to be considered Heroku for .NET, but it already has a growing community. I created a video series (at the bottom of this post) that really highlights how fast you can get a product onto the web and really shows the power and simplicity of AppHarbor. Deploying is as simple as a git/hg push to appharbor. From there they build your code, run any unit tests you have and deploy it if everything succeeds. The screen on the right shows a simple and elegant UI to getting things done. The folks at AppHarbor graciously gave me a limited number of invites to hand out. If you are itching to try AppHarbor then navigate to: https://appharbor.com/account/new?inviteCode=ferventcoder  After playing with it, send feedback if you want more features. Go vote up two features I want that will make it more like Heroku. Disclaimer: I am in no way affiliated with AppHarbor and have not received any funds or favors from anyone at AppHarbor. I just think it is awesome and I want others to know about it. From Zero To Deployed in 15 Minutes (Or Less) Now I have a challenge for you. I created a video series showing how fast I could go from nothing to a deployed application. It could have been from Zero to Deployed in Less than 5 minutes, but I wanted to show you the tools a little more and give you an opportunity to beat my time. And that’s the challenge. Beat my time and show it in a video response. The video series is below (at least one of the videos has to be watched on YouTube). The person with the best time by March 15th @ 11:59PM CST will receive a prize. Ground rules: .NET Application with a valid database connection Start from Zero Deployed with AppHarbor or an alternative A timer displayed in the video that runs during the entire process Video response published on YouTube or acceptable alternative Video(s) must be published by March 15th at 11:59PM CST. Either post the link here as a comment or on YouTube as a response (also by 11:59PM CST March 15th) From Zero To Deployed In 15 Minutes (Or Less) Part 1 From Zero To Deployed In 15 Minutes (Or Less) Part 2 From Zero To Deployed In 15 Minutes (Or Less) Part 3

    Read the article

  • Gamification = -10#/3mo

    - by erikanollwebb
    One of the purposes of gamification of anything is to see if you can modify the behavior of the user. In the enterprise, that might mean getting sales people to enter more information into a CRM system, encouraging employees to update their HR records, motivating people to participate in forums and discussions, or process invoices more quickly.  Wikipedia defines behavior modification as "the traditional term for the use of empirically demonstrated behavior change techniques to increase or decrease the frequency of behaviors, such as altering an individual's behaviors and reactions to stimuli through positive and negative reinforcement of adaptive behavior and/or the reduction of behavior through its extinction, punishment and/or satiation."  Gamification is just a way to modify someone's behavior using game mechanics. And the magic question is always whether it works. So I thought I would present my own little experiment from the last few months.  This spring, I upgraded to a Samsung Galaxy 4.  It's a pretty sweet phone in many ways, but one of the little extras I discovered was a built in app called S Health. S Health is an app that you can use to track calories, weight, exercise and it has a built in pedometer. I looked at it when I got the phone, but assumed you had to turn it on to use it so I didn't look at it much.  But sometime in July, I realized that in fact, it just ran in the background and was quietly tracking my steps, with a goal of 10,000 per day.  10,000 steps per day is this magic number recommended by the Surgeon General and the American Heart Association.  Dr. Oz pushes it as the goal for daily exercise.  It's about 5 miles of walking. I'm generally not the kind of person who always has my phone with me.  I leave it in my purse and pull it out when I need it.  But then I realized that meant I wasn't getting a good measure of my steps.  I decided to do a little experiment, and carry it with me as much as possible for a week.  That's when I discovered the gamification that changed my life over the last 3 months.  When I hit 10,000 steps, the app jingled out a little "success!" tune and I got a badge.  I was hooked.  I started carrying my phone.  I started making sure I had shoes I could walk in with me.  I started walking at lunch time, because I realized how often I sat at my desk for 8-10 hours every day without moving.  I started pestering my husband to walk with me after work because I hadn't hit my 10,000 yet, leading him at one point to say "I'm not as much a slave to that badge as you are!"  I started looking at parking lots differently.  Can't get a space up close?  No worries, just that many steps toward my 10,000.  I even tried to see if there was a second power user level at 15,000 or 20,000 (*sadly, no).  If I was close at the end of the day, I have done laps around my house until I got my badge.  I have walked around the block one more time to get my badge.  I have mentally chastised myself when I forgot to put my phone in my pocket because I don't know how many steps I got.  The badge below I got when my boss and I were in New York City and we walked around the block of our hotel just to watch the badge pop up. There are a bunch of tools out on the market now that have similar ideas for helping you to track your exercise, make it social.  There are apps (my favorite is still Zombies, Run!).  You could buy a FitBit or UP by Jawbone.   Interactive fitness makes the Expresso stationary bike with built in video games.  All designed to help you be more aware of your activity and keep you engaged and motivated.  And the idea is to help you change your behavior. I know someone who would spend extra time and work hard on the Expresso because he had built up strategies for how to kill the most dragons while he was riding to get more points.  When the machine broke down, he didn't ride a different bike because it just wasn't that interesting. But for me, just the simple jingle and badge have been all I needed.  I admit, I still giggle gleefully when I hear the tune sing out from my pocket. After a few weeks, I noticed I had dropped a few pounds.  Not a lot, just 2-3.  But then I was really hooked.  I started making a point both to eat a little less and hit 10,000 steps as much as I could.  I bemoaned that during the floods in Boulder, I wasn't hitting my 10,000 steps.  And now, a few months later, I'm almost 10 lbs lighter. All for 1 badge a day. So yes, simple gamification can increase motivation and engagement.  And that can lead to changes in behavior.  Now the job is to apply that to the enterprise space in a meaningful and engaging way. 

    Read the article

  • Dealing with "I-am-cool-and-you-are-dumb" manager [closed]

    - by Software Guy
    I have been working with a software company for about 6 months now. I like the projects I work on there and I really like all the people there except for 1 guy. That guy is technically smart, and he is a co-founder of the company. He is an okay guy in person (the kind you wouldn't want to care about much) but things get tricky when he is your manager. In general I am all okay but there are times when I feel I am not being treated fairly: He doesn't give much thought to when he makes mistakes and when I do something similar, he is super critical. Recently he went as far as to say "I am not sure if I can trust you with this feature". The detais of this specific case are this: I was working on this feature, and I was already a couple of hours over my normal working hours, and then I decided to stop and continue tomorrow. We use git, and I like to commit changes locally and only push when I feel they are ready. This manager insists that I push all the changes to the central repo (in case my hard drive crashes). So I push the change, and the ticket is marked as "to be tested". Next day I come in, he sits next to me and starts complaining and says that I posted above. I really didn't know what to say, I tried to explain to him that the ticket is still being worked upon but he didn't seem to listen. He interrupts me in-between when I am coding, which I do not mind, but when I do that same, his face turns like this :| and reacts as if his work was super important and I am just wasting his time. He asks me to accumulate all questions, and then ask him altogether which is not always possible, as you need a clarification before you can continue on a feature implementation. And when I am coding, he talks on the phone with his customers next to me (when he can go to the meeting room with his laptop) and doesn't care. He made me switch to a whole new IDE (from Netbeans to a commercial IDE costing a lot of money) for a really tiny feature (which I later found out was in Netbeans as well!). I didn't make a big deal out of it as I am equally comfortable working with this new IDE, but I couldn't get the science behind his obsession. He said this feature makes sure that if any method is updated by a programmer, the IDE will turn the method name to red in places where it is used. I told him that I do not have a problem since I always search for method usage in the project and make sure its updated. IDEs even have refactoring features for exactly that, but... I recently implemented a feature for a project, and I was happy about it and considering him a senior, I asked him his comments about the implementation quality.. he thought long and hard, made a few funny faces, and when he couldn't find anything, he said "ummm, your program will crash if JS is disabled" - he was wrong, since I had made sure it would work fine with default values even if JS was disabled. I told him that and then he said "oh okay". BUT, the funny thing is, a few days back, he implemented something and I objected with "But that would not run if JS is disabled" and his response was "We don't have to care about people who disable JS" :-/ Once he asked me to investigate if there was a way to modify a CMS generated menu programmatically by extending the CMS, I did my research and told him that the only was is to inject a menu item using JavaScript / jQuery and his reaction was "ah that's ugly, and hacky, not acceptable" and two days later, I see that feature implemented in the same way as I had suggested. The point is, his reaction was not respectful at all, even if what I proposed was hacky, he should be respectful, that I know what's hacky and if I am suggesting something hacky, there must be a reason for it. There are plenty of other reasons / examples where I feel I am not being treated fairly. I want your advice as to what is it that I am doing wrong and how to deal with such a situation. The other guys in the team are actually very good people, and I do not want to leave the job either (although I could, if I want to). All I want is respect and equal treatment. I have thought about talking to this guy in a face to face meeting, but that worries me that his attitude might get worse and make things more difficult for me (since he doesn't seem to be the guy who thinks he can be wrong too). I am also considering talking to the other co-founder but I am not sure how he will take it (as both founders have been friends forever). Thanks for reading the long message, I really appreciate your help.

    Read the article

  • Real Time BI in the Real World

    - by tobin.gilman(at)oracle.com
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} One of my favorite BI offerings from Oracle is a solution called Oracle Real Time Decisions.  Whenever I mention this product in customer meetings, eyes light up.  There are some fascinating examples of customers using it to up-sell, cross-sell, increase customer retention, and reduce risk in real time, with off the charts return on investment. I plan to share some of those stories in a future blog.  In this post however, I want to share some far more common real time analytics use case scenarios that are being addressed with widely deployed Oracle BI and data integration technologies Not all real time BI applications require continuous learning, predictive modeling, and data mining.  Many simply require the ability to integrate, aggregate, and access information that is current (typically within in few minutes or a few seconds).  The use cases are infinite.  A few I've seen: ·         Purchasing agents need to match demand against available inventory ·         Manufacturing planners need to monitor current parts and material against scheduled build plans ·         Airline agents need to match ticket demand against flight schedules, ·         Human resources managers need to track the status of global hiring requisitions against current headcount authorizations...you get the idea. One way of doing this is to run reports or federated queries directly against transactional systems.  That approach can be viable if you only need to access simple data sets on rare occasions.  High volume and complex queries can quickly bog down performance of mission critical transactional systems.  There is an architecturally simple way of solving the problem, and it's being applied by real companies around the world to solve real needs in real time.    Cbeyond is an Atlanta, GA based  provider of voice, data and mobile business applications delivers.  They deliver real time information to its call center agents  as they are interacting with their customers. The data they need resides in production CRM and other transactional systems, but  instead or reporting directly off the those systems, data is first moved to an operational data store (ODS).  Rather than running data intensive, time consuming, and performance degrading batch ETL routines to populate the ODS, Cbeyond uses Oracle Golden Gate software to incrementally capture and move only the changed records from log files of the transactional systems every few minutes.  There is no impact on transactional system performance, and the information needed by call center representatives is up to date.  Oracle Business Intelligence software presents the information to services reps in a rich, visual, and highly interactive format. Avea is similar to Cbeyond.  They are a telecommunications company who integrates billing and customer information in an ODS that is accessed by their call center agents in real time using Oracle Golden Gate and Oracle Business Intelligence.  They've taken it a step further by using the ODS to feed a data warehouse.  The operational data store provides the current information needed by call center agents during "in flight" customer interactions.  The data warehouse is used for more sophisticated analysis of historical data.  For maximum performance, both the ODS and data warehouse run on the Oracle Exadata Database Machine. These are practical illustrations of companies addressing real time reporting and analysis needs using established business intelligence/data warehousing methodologies and tools common to many IT departments.  If real time BI could benefit your organization, you may be already be closer than you thought to having the pieces in place to solving the problem.    Give us a shout if you are interested in learning more or if you have an interesting use or approach to real-time BI.

    Read the article

  • Educause Top-Ten IT Issues - the most change in a decade or more

    - by user739873
    The Education IT Issue Panel has released the 2012 top-ten issues facing higher education IT leadership, and instead of the customary reshuffling of the same deck, the issues reflect much of the tumult and dynamism facing higher education generally.  I find it interesting (and encouraging) that at the top of this year's list is "Updating IT Professionals' Skills and Roles to Accommodate Emerging Technologies and Changing IT Management and Service Delivery Models."  This reflects, in my view, the realization that higher education IT must change in order to fully realize the potential for transforming the institution, and therefore it's people must learn new skills, understand and accept new ways of solving problems, and not be tied down by past practices or institutional inertia. What follows in the remaining 9 top issues all speak, in some form or fashion, to the need for dramatic change, but not just in the areas of "funding IT" (code for cost containment or reduction), but rather the need to increase effectiveness and efficiency of the institution through the use of technology—leveraging the wave of BYOD (Bring Your Own Device) to the institution's advantage, rather than viewing it as a threat and a problem to be contained. Although it's #10 of 10, IT Governance (and establishment and implementation of the governance model throughout the institution) is key to effectively acting upon many of the preceding issues in this year's list.  In the majority of cases, technology exists to meet the needs and requirements to effectively address many of the challenges outlined in top-ten issues list. Which brings me to my next point. Although I try not to sound too much like an Oracle commercial in these (all too infrequent) blog posts, I can't help but point out how much confluence there is between several of the top issues this year and what my colleagues and I have been evangelizing for some time. Starting from the bottom of the list up: 1) I'm gratified that research and the IT challenges it presents has made the cut.  Big Data (or Large Data as it's phased in the report) is rapidly going to overwhelm much of what exists today even at our most prepared and well-equipped research universities.  Combine large data with the significantly more stringent requirements around data preservation, archiving, sharing, curation, etc. coming from granting agencies like NSF, and you have the brewing storm that could result in a lot of "one-off" solutions to a problem that could very well be addressed collectively and "at scale."   2) Transformative effects of IT – while I see more and more examples of this, there is still much more that can be achieved. My experience tells me that culture (as the report indicates or at least poses the question) gets in the way more than technology not being up to task.  We spend too much time on "context" and not "core," and get lost in the weeds on the journey to truly transforming the institution with technology. 3) Analytics as a key element in improving various institutional outcomes.  In our work around Student Success, we see predictive "academic" analytics as essential to getting in front of the Student Success issue, regardless of how an institution or collections of institutions defines success.  Analytics must be part of the fabric of the key academic enterprise applications, not a bolt-on.  We will spend a significant amount of time on this topic during our semi-annual Education Industry Strategy Council meeting in Washington, D.C. later this month. 4) Cloud strategy for the broad range of applications in the academic enterprise.  Some of the recent work by Casey Green at the Campus Computing Survey would seem to indicate that there is movement in this area but mostly in what has been termed "below the campus" application areas such as collaboration tools, recruiting, and alumni relations.  It's time to get serious about sourcing elements of mature applications like student information systems, HR, Finance, etc. leveraging a model other than traditional on-campus custom. I've only selected a few areas of the list to highlight, but the unifying theme here (and this is where I run the risk of sounding like an Oracle commercial) is that these lofty goals cry out for partners that can bring economies of scale to bear on the problems married with a deep understanding of the nuances unique to higher education.  In a recent piece in Educause Review on Student Information Systems, the author points out that "best of breed is back". Unfortunately I am compelled to point out that best of breed is a large part of the reason we have made as little progress as we have as an industry in advancing some of the causes outlined above.  Don't confuse "integrated" and "full stack" for vendor lock-in.  The best-of-breed market forces that Ron points to ensure that solutions have to be "integratable" or they don't survive in the marketplace. However, by leveraging the efficiencies afforded by adopting solutions that are pre-integrated (and possibly metered out as a service) allows us to shed unnecessary costs – as difficult as these decisions are to make and to drive throughout the organization. Cole

    Read the article

  • Defaulting the HLSL Vertex and Pixel Shader Levels to Feature Level 9_1 in VS 2012

    - by Michael B. McLaughlin
    I love Visual Studio 2012. But this is not a post about that. This is a post about tweaking one particular parameter that I’ve found a bit annoying. Disclaimer: You will be modifying important MSBuild files. If you screw up you will break your build tools. And maybe your computer will catch fire. I’m not responsible. No warranties or guaranties of any sort. This info is provided “as is”. By default, if you add a new vertex shader or pixel shader item to a project, it will be set to build with shader profile 4.0_level_9_3. If you need 9_3 functionality, this is all well and good. But (especially for Windows Store apps) you really want to target the lowest shader profile possible so that your game will run on as many computers as possible. So it’s a good idea to default to 9_1. To do this you could add in new HLSL files via “Add->New Item->Visual C++->HLSL->______ Shader File (.hlsl)” and then edit the shader files’ properties to set them manually to use 9_1 via “Properties->HLSL Compiler->General->Shader Model”. This is fine unless you forget to do this once and then submit your game with 9_3 shaders instead of 9_1 shaders to the Windows Store or to some other game store. Then you’d wind up with either rejection or angry “this doesn’t work on my computer! ripoff!” messages. There’s another option though. In “Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\ItemTemplates\VC\HLSL\1033\VertexShader” (note the path might vary slightly for you if you are using a 32-bit system or have a non-ENU version of Visual Studio 2012) you will find a “VertexShader.vstemplate” file. If you open this file in a text editor (e.g. Notepad++), then inside the CustomParameters tag within the TemplateContent tag you should see a CustomParameter tag for the ShaderType, i.e.: <CustomParameter Name="$ShaderType$" Value="Vertex"/> On a new line, we are going to add another CustomParameter tag to the CustomParameters tag. It will look like this: <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/> such that we now have:     <CustomParameters>       <CustomParameter Name="$ShaderType$" Value="Vertex"/>       <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/>     </CustomParameters> You can then save the file (you will need to be an Administrator or have Administrator access). Back in the 1033 directory (or whatever the number is for your language), go into the “PixelShader” directory. Edit the “PixelShader.vstemplate” file and make the same change (note that this time $ShaderType$ is “Pixel” not “Vertex”; you shouldn’t be changing that line anyway, but if you were to just copy and replace the above four lines then you will wind up creating pixel shaders that the HLSL compiler would try to compile as vertex shaders, with all sort of weird errors as a result). Once you’ve added the $ShaderModel$ line to “PixelShader.vstemplate” and have saved it, everything should be done. Since Feature Level 9_1 and 9_3 don’t support any of the other shader types, those are set to default to their appropriate minimums already (Compute and Geometry are set to “4.0” and Domain and Hull are set to “5.0”, which are their respective minimums (though not all 4.0 cards support Compute shaders; they were an optional feature added with DirectX 10.1 and only became required for DirectX 11 hardware). In case you are wondering where these magic values come from, you can find them all in the “fxc.xml” file in the “\Program Files (x86)\MSBuild\Microsoft.CPP\v4.0\V110\1033” directory (or whatever your language number is; 1033 is ENU and various other product languages have their own respective numbers (see: http://msdn.microsoft.com/en-us/goglobal/bb964664.aspx ) such that Japanese is 1041 (for example), though for all I know MSBuild tasks might be 1033 for everyone). If, like me, you installed VS 2012 to a drive other than the C:\ drive, you will find the vstemplate files in the drive to which you installed VS 2012 (D:\ in my case) but you will find the fxc.xml file on the C:\ drive. You should not edit fxc.xml. You will almost definitely break things by doing that; it’s just something you can look through to see all the other options that the FXC task takes such that you could, if needed, add further CustomParameter tags if you wanted to default to other supported options. I haven’t tried any others though so I don’t have any advice on how to set them.

    Read the article

  • 24 Hours of PASS – first reflections

    - by Rob Farley
    A few days after the end of 24HOP, I find myself reflecting on it. I’m still waiting on most of the information. I want to be able to discover things like where the countries represented on each of the sessions, and things like that. So far, I have the feedback scores and the numbers of attendees. The data was provided in a PDF, so while I wait for it to appear in a more flexible format, I’ve pushed the 24 attendee numbers into Excel. This chart shows the numbers by time. Remember that we started at midnight GMT, which was 10:30am in my part of the world and 8pm in New York. It’s probably no surprise that numbers drooped a bit at the start, stayed comparatively low, and then grew as the larger populations of the English-speaking world woke up. I remember last time 24HOP ran for 24 hours straight, there were quite a few sessions with less than 100 attendees. None this time though. We got close, but even when it was 4am in New York, 8am in London and 7pm in Sydney (which would have to be the worst slot for attracting people), we still had over 100 people tuning in. As expected numbers grew as the UK woke up, and even more so as the US did, with numbers peaking at 755 for the “3pm in New York” session on SQL Server Data Tools. Kendra Little almost reached those numbers too, and certainly contributed the biggest ‘spike’ on the chart with her session five hours earlier. Of all the sessions, Kendra had the highest proportion of ‘Excellent’s for the “Overall Evaluation of the session” question, and those of you who saw her probably won’t be surprised by that. Kendra had one of the best ranked sessions from the 24HOP event this time last year (narrowly missing out on being top 3), and she has produced a lot of good video content since then. The reports indicate that there were nearly 8.5 thousand attendees across the 24 sessions, averaging over 350 at each one. I’m looking forward to seeing how many different people that was, although I do know that Wil Sisney managed to attend every single one (if you did too, please let me know). Wil even moderated one of the sessions, which made his feat even greater. Thanks Wil. I also want to send massive thanks to Dave Dustin. Dave probably would have attended all of the sessions, if it weren’t for a power outage that forced him to take a break. He was also a moderator, and it was during this session that he earned special praise. Part way into the session he was moderating, the speaker lost connectivity and couldn’t get back for about fifteen minutes. That’s an incredibly long time when you’re in a live presentation. There were over 200 people tuned in at the time, and I’m sure Dave was as stressed as I was to have a speaker disappear. I started chasing down a phone number for the speaker, while Dave spoke to the audience. And he did brilliantly. He started answering questions, and kept doing that until the speaker came back. Bear in mind that Dave hadn’t expected to give a presentation on that topic (or any other), and was simply drawing on his SQL expertise to get him through. Also consider that this was between midnight at 1am in Dave’s part of the world (Auckland, NZ). I would’ve been expecting just to welcome people, monitor questions, probably read some out, and in general, help make things run smoothly. He went far beyond the call of duty, and if I had a medal to give him, he’d definitely be getting one. On the whole, I think this 24HOP was a success. We tried a different platform, and I think for the most part it was a popular move. We didn’t ask the question “Was this better than LiveMeeting?”, but we did get a number of people telling us that they thought the platform was very good. Some people have told me I get a chance to put my feet up now that this is over. As I’m also co-ordinating a tour of SQLSaturday events across the Australia/New Zealand region, I don’t quite get to take that much of a break (plus, there’s the little thing of squeezing in seven SQL 2012 exams over the next 2.5 weeks). But I am pleased to be reflecting on this event rather than anticipating it. There were a number of factors that could have gone badly, but on the whole I’m pleased about how it went. A massive thanks to everyone involved. If you’re reading this and thinking you wish you could’ve tuned in more, don’t worry – they were all recorded and you’ll be able to watch them on demand very soon. But as well as that, PASS has a stream of content produced by the Virtual Chapters, so you can keep learning from the comfort of your desk all year round. More info on them at sqlpass.org, of course.

    Read the article

  • Mark Hurd on the Customer Revolution: Oracle's Top 10 Insights

    - by Richard Lefebvre
    Reprint of an article from Forbes Businesses that fail to focus on customer experience will hear a giant sucking sound from their vanishing profitability. Because in today’s dynamic global marketplace, consumers now hold the power in the buyer-seller equation, and sellers need to revamp their strategy for this new world order. The ability to relentlessly deliver connected, personalized and rewarding customer experiences is rapidly becoming one of the primary sources of competitive advantage in today’s dynamic global marketplace. And the inability or unwillingness to realize that the customer is a company’s most important asset will lead, inevitably, to decline and failure. Welcome to the lifecycle of customer experience, in which consumers explore, engage, shop, buy, ask, compare, complain, socialize, exchange, and more across multiple channels with the unconditional expectation that each of those interactions will be completed in an efficient and personalized manner however, wherever, and whenever the customer wants. While many niche companies are offering point solutions within that sprawling and complex spectrum of needs and requirements, businesses looking to deliver superb customer experiences are still left having to do multiple product evaluations, multiple contract negotiations, multiple test projects, multiple deployments, and–perhaps most annoying of all–multiple and never-ending integration projects to string together all those niche products from all those niche vendors. With its new suite of customer-experience solutions, Oracle believes it can help companies unravel these challenges and move at the speed of their customers, anticipating their needs and desires and creating enduring and profitable relationships. Those solutions span the full range of marketing, selling, commerce, service, listening/insights, and social and collaboration tools for employees. When Oracle launched its suite of Customer Experience solutions at a recent event in New York City, president Mark Hurd analyzed the customer experience revolution taking place and presented Oracle’s strategy for empowering companies to capitalize on this important market shift. From Hurd’s presentation and related materials, I’ve extracted a list of Hurd’s Top 10 Insights into the Customer Revolution. 1. Please Don’t Feed the Competitor’s Pipeline!After enduring a poor experience, 89% of consumers say they would immediately take their business to your competitor. (Except where noted, the source for these findings is the 2011 Customer Experience Impact (CEI) Report including a survey commissioned by RightNow (acquired by Oracle in March 2012) and conducted by Harris Interactive.) 2. The Addressable Market Is Massive. Only 1% of consumers say their expectations were always met by their actual experiences. 3. They’re Willing to Pay More! In return for a great experience, 86% of consumers say they’ll pay up to 25% more. 4. The Social Media Microphone Is Always Live. After suffering through a poor experience, more than 25% of consumers said they posted a negative comment on Twitter or Facebook or other social media sites. Conversely, of those consumers who got a response after complaining, 22% posted positive comments about the company. 5.  The New Deal Is Never Done: Embrace the Entire Customer Lifecycle. An appropriately active and engaged relationship, says Hurd, extends across every step of the entire processs: need, research, select, purchase, receive, use, maintain, and recommend. 6. The 360-Degree Commitment. Customers want to do business with companies that actively and openly demonstrate the desire to establish strong and seamless connections across employees, the company, and the customer, says research firm Temkin Group in its report called “The CX Competencies.” 7. Understand the Emotional Drivers Behind Brand Love. What makes consumers fall in love with a brand? Among the top factors are friendly employees and customer reps (73%), easy access to information and support (55%), and personalized experiences, such as when companies know precisely what products or services customers have purchased in the past and what issues those customers have raised (36%). 8.  The Importance of Immediate Action. You’ve got one week to respond–and then the opportunity’s lost. If your company needs more than a week to answer a prospect’s question or request, most of those prospects will terminate the relationship. 9.  Want More Revenue, Less Churn, and More Referrals? Then improve the overall customer experience: Forrester’s research says that approach put an extra $900 million in the pockets of wireless service providers, $800 million for hotels, and $400 million for airlines. 10. The Formula for CX Success.  Hurd says it includes three elegantly interlaced factors: Connected Engagement, to personalize the experience; Actionable Insight, to maximize the engagement; and Optimized Execution, to deliver on the promise of value. RECOMMENDED READING: The Top 10 Strategic CIO Issues For 2013 Wal-Mart, Amazon, eBay: Who’s the Speed King of Retail? Career Suicide and the CIO: 4 Deadly New Threats Memo to Marc Benioff: Social Is a Tool, Not an App

    Read the article

  • Use your own domain email and tired of SPAM? SPAMfighter FTW

    - by Dave Campbell
    I wouldn't post this if I hadn't tried it... and I paid for it myself, so don't anybody be thinking I'm reviewing something someone sent me! Long ago and far away I got very tired of local ISPs and 2nd phone lines and took the plunge and got hooked up to cable... yeah I know the 2nd phone line concept may be hard for everyone to understand, but that's how it was in 'the old days'. To avoid having to change email addresses all the time, I decided to buy a domain name, get minimal hosting, and use that for all email into the house. That way if I changed providers, all the email addresses wouldn't have to change. Of course, about a dozen domains later, I have LOTS of pop email addresses and even an exchange address to my client's server... times have changed. What also has changed is the fact that we get SPAM... 'back in the day' when I was a beta tester for the first ISP in Phoenix, someone tried sending an ad to all of us, and what he got in return for his trouble was a bunch of core dumps that locked up his email... if you don't know what a core dump is, ask your grandfather. But in today's world, we're all much more civilized than that, and as with many things, the criminals seem to have much more rights than we do, so we get inundated with email offering all sorts of wild schemes that you'd have to be brain-dead to accept, but yet... if people weren't accepting them, they'd stop sending them. I keep hoping that survival of the smartest would weed out the mental midgets that respond and then the jumk email stop, but that hasn't happened yet anymore than finding high-quality hearing aids at the checkout line of Safeway because of all the dimwits playing music too loud inside their car... but that's another whole topic and I digress. So what's the solution for all the spam? And I mean *all*... on that old personal email address, I am now getting over 150 spam messages a day! Yes I know that's why God invented the delete key, but I took it on as a challenge, and it's a matter of principle... why should I switch email addresses, or convert from [email protected] to something else, or have all my email filtered through some service just because some A-Hole somewhere has a site up trying to phish Ma & Pa Kettle (ask your grandfather about that too) out of their retirement money? Well... I got an email from my cousin the other day while I was writing yet another email rule, and there was a banner on the bottom of his email that said he was protected by SPAMfighter. SPAMfighter huh.... so I took a look at their site, and found yet one more of the supposed tools to help us. But... I read that they're a Microsoft Gold Partner... and that doesn't come lightly... so I took a gamble and here's what I found: I installed it, and had to do a couple things: 1) SPAMfighter stuffed the SPAMfighter folder into my client's exchange address... I deleted it, made a new SPAMfighter folder where I wanted it to go, then in the SPAMfighter Clients settings for Outlook, I told it to put all spam there. 2) It didn't seem to be doing anything. There's a ribbon button that you can select "Block", and I did that, wondering if I was 'training' it, but it wasn't picking up duplicates 3) I sent email to support, and wrote a post on the forum (not to self: reply to that post). By the time the folks from the home office responded, it was the next day, and first up, SPAMfighter knocked down everything that came through when Outlook opend... two thumbs up! I disabled my 'garbage collection' rule from Outlook, and told Outlook not to use the junk folder thinking it was interfering. 4) Day 2 seemed to go about like Day 1... but I hung in there. 5) Day 3 is now a whole new day... I had left Outlook open and hadn't looked at the PC since sometime late yesterday afternoon, and when I looked this morning, *every bit* of spam was in the SPAMfighter folder!! I'm a new paying customer After watching SPAMfighter work this morning, I've purchased a 1-year license, and I now can sit and watch as emails come in and disappear from my inbox into the SPAMfighter folder. No more continual tweaking of the rules. I've got SPAMfighter set to 'Very Hard' filtering... personally I'd rather pull the few real emails out of the SPAMfighter folder than pull spam out of the real folders. Yes this is simply another way of using the delete key, but you know what? ... it feels good :) Here's a screenshot of the stats after just about 48 hours of being onboard: Note that all the ones blocked by me were during Day 1 and 2... I've blocked none today, and everything is blocked. Stay in the 'Light!

    Read the article

  • Add Widget via Action in Toolbar

    - by Geertjan
    The question of the day comes from Vadim, who asks on the NetBeans Platform mailing list: "Looking for example showing how to add Widget to Scene, e.g. by toolbar button click." Well, the solution is very similar to this blog entry, where you see a solution provided by Jesse Glick for VisiTrend in Boston: https://blogs.oracle.com/geertjan/entry/zoom_capability Other relevant articles to read are as follows: http://netbeans.dzone.com/news/which-netbeans-platform-action http://netbeans.dzone.com/how-to-make-context-sensitive-actions Let's go through it step by step, with this result in the end, a solution involving 4 classes split (optionally, since a central feature of the NetBeans Platform is modularity) across multiple modules: The Customer object has a "name" String and the Droppable capability has a method "doDrop" which takes a Customer object: public interface Droppable {    void doDrop(Customer c);} In the TopComponent, we use "TopComponent.associateLookup" to publish an instance of "Droppable", which creates a new LabelWidget and adds it to the Scene in the TopComponent. Here's the TopComponent constructor: public CustomerCanvasTopComponent() {    initComponents();    setName(Bundle.CTL_CustomerCanvasTopComponent());    setToolTipText(Bundle.HINT_CustomerCanvasTopComponent());    final Scene scene = new Scene();    final LayerWidget layerWidget = new LayerWidget(scene);    Droppable d = new Droppable(){        @Override        public void doDrop(Customer c) {            LabelWidget customerWidget = new LabelWidget(scene, c.getTitle());            customerWidget.getActions().addAction(ActionFactory.createMoveAction());            layerWidget.addChild(customerWidget);            scene.validate();        }    };    scene.addChild(layerWidget);    jScrollPane1.setViewportView(scene.createView());    associateLookup(Lookups.singleton(d));} The Action is displayed in the toolbar and is enabled only if a Droppable is currently in the Lookup: @ActionID(        category = "Tools",        id = "org.customer.controler.AddCustomerAction")@ActionRegistration(        iconBase = "org/customer/controler/icon.png",        displayName = "#AddCustomerAction")@ActionReferences({    @ActionReference(path = "Toolbars/File", position = 300)})@NbBundle.Messages("AddCustomerAction=Add Customer")public final class AddCustomerAction implements ActionListener {    private final Droppable context;    public AddCustomerAction(Droppable droppable) {        this.context = droppable;    }    @Override    public void actionPerformed(ActionEvent ev) {        NotifyDescriptor.InputLine inputLine = new NotifyDescriptor.InputLine("Name:", "Data Entry");        Object result = DialogDisplayer.getDefault().notify(inputLine);        if (result == NotifyDescriptor.OK_OPTION) {            Customer customer = new Customer(inputLine.getInputText());            context.doDrop(customer);        }    }} Therefore, when the Properties window, for example, is selected, the Action will be disabled. (See the Zoomable example referred to in the link above for another example of this.) As you can see above, when the Action is invoked, a Droppable must be available (otherwise the Action would not have been enabled). The Droppable is obtained in the Action and a new Customer object is passed to its "doDrop" method. The above in pictures, take note of the enablement of the toolbar button with the red dot, on the extreme left of the toolbar in the screenshots below: The above shows the JButton is only enabled if the relevant TopComponent is active and, when the Action is invoked, the user can enter a name, after which a new LabelWidget is created in the Scene. The source code of the above is here: http://java.net/projects/nb-api-samples/sources/api-samples/show/versions/7.3/misc/WidgetCreationFromAction Note: Showing this as an MVC example is slightly misleading because, depending on which model object ("Customer" and "Droppable") you're looking at, the V and the C are different. From the point of view of "Customer", the TopComponent is the View, while the Action is the Controler, since it determines when the M is displayed. However, from the point of view of "Droppable", the TopComponent is the Controler, since it determines when the Action, i.e., which is in this case the View, displays the presence of the M.

    Read the article

< Previous Page | 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128  | Next Page >