Search Results

Search found 8737 results on 350 pages for 'clear'.

Page 113/350 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Dell Vostro 1520 Unable to Read Compact Flash Card with Adapter?

  - by Jim Taylor

  I Purchased the Dell Vostro 1520 a few months ago and recently tried using a PCMCIA adapter for the Compact Flash card my camera uses. I can't get the laptop to find the card. Tried going online to see if a CF card should work, but have not found a clear or definate answer. I do not want to deal with Dell on the phone as even 800 #'s cost me more than it's worth to use. Hoping someone can let me know if I'm wasting my time trying to get the laptop to read my CF card. It's the only type card I have to try the input slot, so can't test to see if the input slot even works. Thanks, -- ‹(•¿•)› Jim

  Read the article

• Battery backed write cache behavior upon disk change

  - by Halfgaar

  We use 3ware Inc 9650SE SATA-II RAID PCIe RAID controllers with battery backed write cache. Our spare hardware has the same controller. I was wondering; are these controllers smart enough not to sync the cache when the disks have been changed? For example, if I deploy one of those spare machines by putting in the disks of another machine and that spare machine still has pending writes, will it be smart enough not to perform those writes on the replaced array? Edit: my scenario is not really made clear, so let me give an example: server1 goes down because of power supply failure. I put the disks in server2 and start. I repair server1 I put the disks back from server2 in server1 (it's not relevant right now that in reality I would probably keep server2 running). If server1 doesn't have safeguards, it will write to the array, thinking it's simply powering up again, corrupting it.

  Read the article

• RAID Read/Write Speed Gradually Slows

  - by Nalandial

  This is actually a server at home, but I felt it was sufficiently complicated as to not have it on SuperUser and could easily apply to a professional situation. I have a file server running Debian (Lenny 5.0.4), and it has an XFS LVM on top of a RAID 5 with the OS drive separate from the RAID. It's also running apache, samba, and postgresql. Side note: before anyone asks, I'm using RAID5 because I get more bang for the buck on raw drive space, and still have some fault tolerance. When the box is started (via shutdown or reboot) reading/writing to it's samba share maxes out the gigabit network connection. Over time, this slowly degrades eventually becoming < 10MB/s; however, when rebooted the speed returns to maxing out the connection. Why is this happening, and is there a way to 'clear' out whatever's causing it without taking the server down? Thanks in advance!

  Read the article

• Cisco, How to do a subnetting scheme using VLSM and RIP-2?

  - by Andrei T. Ursan

  I'm studying for my CCNA exam and I have to create a VLSM scheme using RIP-2 for the following requirements: (this is an exercise) Use the class C network 192.168.1.0 network for your point-to-point connections Using the Class A network 10.0.0.0, plan for the following number of hosts in each location: New York: 1000 Chicago: 500 Los Angeles: 1000 On the LAN and point-to-point connections, select subnet masks that use the smallest ranges of IP addresses possible given the above requirements. In all cases, use the lowest possible subnet numbers. Subnet zero is allowed. My guess is the following: New York: S0/0 192.168.1.1 /24 Fa0/0 10.1.0.1 netmask 255.255.248.0 - because we need 1000 hosts Chicago: S0/0 192.168.1.2 /24 Fa0/0 10.2.0.1 netmask 255.255.252.0 (for 500 hosts) Los Angeles: S0/0 192.168.2.3 /24 Fa0/0 10.3.0.1 netmask 255.255.248.0 (for 1000 hosts) Is this a good configuration? I'm reading the CCNA book but not everything is very clear, so I said to do some exercises... Thank you!

  Read the article

• Security Audit Failures in Event Viewer Windows Server 2008R2

  - by Jacob

  When I am looking at the security tab of my event viewer on a Windows Server 2008 R2, I am showing a ton of Audit Failures with Event ID 4776. The computer attempted to validate the credentials for an account. Authentication Package: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 Logon Account: randy Source Workstation: HPDB1 Error Code: 0xc0000064 I verified the account "randy" exist in my Active Directory. From my understanding, there has not been any recent password changes. Is there any way to get detailed information on this error? I am wondering what program is requesting this information. Also, is there any way to clear this error up? I was thinking about resetting the password and changing it back to the original.

  Read the article

• is it written in flex? the steam client application

  - by Jayapal Chandran

  Hi, I was about to download the PC Game Mafia II ( http://en.wikipedia.org/wiki/Mafia_II ). The site said that do i have steam and i said no ... it asked whether to download and i gave yes. After downloading a 1.5mb exe it executed, dowloaded and installed additional files. After that the program opened. It gave me a feeling that that could have written in flex. if some body could clear this then that could be nice... besides, i went to the mafia ii official site to download the demo and again it asked whether i have steam installed and i said yes. then the firefox application launch dialog box appeared. and again i had this question how to launch an application using firefox... ?? may be i should ask this as a separate question but since it is associated with the above question i asked it here...

  Read the article

• Copy files between two windows machines on seperate domains

  - by Simon

  I need to copy several database backups between two computers. The source computer initiates the copy and is a Windows 2000 pc and is a member of domain1. The destination machine is running Windows Server 2000 and is a member of domain2. The machines are on separate networks physically connected via a firewall. The files are currently copied via ssh with http://sshwindows.sourceforge.net/ installed on the destination machine. There is no need to encrypt the contents during the copy, however the passwords should not be sent in the clear. I am looking for a way to copy the files without having to install a server on the destination. I specifically need help with how to set up the permissions and what ports would need to be opened on the firewall.

  Read the article

• How to associate a domain name and IP address?

  - by StackedCrooked

  The situation is as follows: I am renting a dedicated server using SliceHost. On this server I have installed a small HTTPServer. I can verify that it works by nativating directly to its IP address (example). I have also purchased a domain name from gandi.net and would like to link it with to my server. However, I'm having much trouble finding clear instructions on how to create this link. After a few hours of reading documentation and trying out things I ended up the following configuration. on the DNS registrar I have specified the following settings: on the Slicehost server I specified these "records": But it doesn't seem to work. I end up on this page telling me the domain name is not available. Does anyone have an idea what I am doing wrong?

  Read the article

• Simple one-way synchronisation of user password list between servers

  - by Renaud Bompuis

  Using a RedHat-derivative distro (CentOS), I'd like to keep the list of regular users (UID over 500), and group (and shadow files) pushed to a backup server. The sync is only one-way, from the main server to the backup server. I don't really want to have to deal with LDAP or NIS. All I need is a simple script that can be run nightly to keep the backup server updated. The main server can SSH into the backup system. Any suggestion? Edit: Thanks for the suggestions so far but I think I didn't make myself clear enough. I'm only looking at synchronising normal users whose UID is on or above 500. System/service users (with UID below 500) may be different on both system. So you can't just sync the whole files I'm afraid.

  Read the article

• Excel 2007 Constantly Creating Custom Cell Styles

  - by Nick

  Hello, I've been using Office 2007 for a few months now and have noticed that it was creating duplicate custom cell styles on its own, like Normal 2, Normal 3, etc. It didn't really bother me at first, but now Excel will lag when I open the cell styles menu as it gathers well over a hundred of these duplicates (I have seen Normal 54 and Normal 5 2 2 so I'm unsure as to how many there actually are). I have also just checked a fresh Excel sheet, and it only has the defaults, but one I created earlier today from scratch has the Normal 54 listed. My questions are: Why is this happening? Can I delete a temp or custom settings file somewhere to clear this? Any help on this is appreciated.

  Read the article

• How can I make Firefox remember my session while still clearing browsing history on close?

  - by Philip

  I am aware, thanks to this thread ( https://support.mozilla.com/en-US/forum/1/381229 ), that Firefox doesn't save sessions when browsing history is cleared at close, as effectively the open tabs are themselves cleared from the history before the session is saved. But I would like Firefox to behave differently. Is there any way to change Firefox's behavior so it will clear my browsing history when it closes, but remember only that a certain list of tabs were open, and then restore those tabs when it opens (not even necessarily with those tabs' histories)? I'm running FF 3.5.6 on Mac OS X 10.5. Thanks.

  Read the article

• Showing protocol specific mini icons for Jabber/XMPP gateway contacts

  - by aef

  Since a short while I'm using Ubuntu Oneiric Ocelot (11.10) with gnome-shell (Gnome 3) and I'm trying to get accustomed to the default Empathy Instant Messaging client. I'm using a gateway service on the side of my Jabber/XMPP server to communicate with lots of contacts over proprietary networks like ICQ or MSN. So I don't use Empathy's native support for ICQ and MSN, and I don't want to change back to using such a thing for various reasons. One thing that annoys me is that Empathy does not make it clear to me that these contacts are from another instant messaging network. If I enable the View Show Protocols option they are all recognized as Jabber/XMPP contacts. Although I perfectly understand why that happens, I would like to be able to change this behavior to make Empathy mark these contacts correctly. Is there a configuration option or a plugin for this? Or may this feature still be in development and will be available later?

  Read the article

• Install Chromium OS to SECOND internal drive on EEE 901?

  - by Andrew Swift

  I am trying to install the Chromium OS on an EEE PC 901, and I have succeeded in using Image Writer for Windows 0.2r23 to copy the IMG file to an SDHC card. Since the OS speed is limited by slow card access, I'd like to install the Chromium OS on the second, unused, internal SSD Drive, D:. However, Image Writer doesn't allow me to restore an internal drive from an IMG file. To be clear: I boot in XP on C: then run Image Writer to install the Chromium OS. Does anyone know how I can either convince Image Writer that D: is a removable drive or know of alternative program that will let me restore D: from an IMG file (non-windows file system)?

  Read the article

• Wake up and record in Windows Media Center on a Mac Mini

  - by Sir Code-A-Lot

  I'm currently considering buying a Mac Mini to use as a media center. I plan to install Windows 7 (or 8) on it, using Boot Camp. Will it be able to go into standby or hibernate (S3, S4?) and wake up to record TV scheduled in Windows Media Center? I haven't been able to find concrete information on supported standby types when running Windows under boot camp, and if Windows will even be able to wake when a recording should start. I just want to be clear on any limitations in this area before I buy anything.

  Read the article

• safeboot and wubi

  - by G S

  Hi, Having read various posts it seems clear that installing Wubi on a machine which already has safeboot installed with disk encryption is a non-starter at the moment - nor is repartitioning the disk it would seem. However while the c: partion is encrypted - it has an NTFS formatted q: partition that is not encrypted and has about 4GB free - so I was wondering if there was any way to install WUBI using that partion. Obvisouly stil need a means of booting into it without stuffing my safeboot booting mechanism. I'm thinking that this should be possible as the safeboot booting mechanism will get me to the boot choice options and thereafter all references in the boot.ini entry for the wubi installtion should be to files on the non-encrypted NTFS partion and so it should be OK and not attempt any changes to my envrypted c: partion (other than adding the extra entry to boot.ini) ? any thoughts? ta

  Read the article

• ubuntu input/output error

  - by rplevy

  I'm having a problem with Ubuntu that I'm finding hard to troubleshoot for reasons that will become clear: reboot -bash: /sbin/reboot: Input/output error dmesg -bash: /bin/dmesg: Input/output error ps -e ps: error while loading shared libraries: /lib/libproc-3.2.8.so: cannot read file data: Input/output error lsof -bash: /usr/bin/lsof: Input/output error fsck -bash: /sbin/fsck: Input/output error badblocks -bash: /sbin/badblocks: Input/output error So I can't see what is going on, and I can't remotely reboot. What can I do to get to the bottom of this? Interestingly: init 0 Segmentation fault I can cat /var/syslog but not /var/log/messages or several other important files. less and more don't work, neither do tail or head, etc.

  Read the article

• How do UEFI and virtual machines relate to each other?

  - by Iterator

  I am trying to get my head around UEFI (Unified Extensible Firmware Interface) and it's not entirely clear to me how this affects virtual machines. Thus, there are three parts to this question: Is UEFI an advance in hardware support for virtualization? All other things being equal, would a machine with UEFI be more likely to run a virtual machine more efficiently than one without, or does UEFI cause any performance hits that negate any speed improvements from a virtual machine? Would the difference in execution be visible to code running in a virtual machine? (In theory, it shouldn't, but in practice?)

  Read the article

• sSMTP Configuration Question

  - by SevenCentral

  I've installed sSMTP on Ubuntu 10.04 via: sudo apt-get install ssmtp My configuration file is: # # Config file for sSMTP sendmail # # The person who gets all mail for userids < 1000 # Make this empty to disable rewriting. [email protected] # The place where the mail goes. The actual machine name is required no # MX records are consulted. Commonly mailhosts are named mail.domain.com mailhub=smtp.gmail.com:587 # Where will the mail seem to come from? #rewriteDomain= # The full hostname hostname=somedomain.com # Are users allowed to set their own From: address? # YES - Allow the user to specify their own From: address # NO - Use the system generated From: address #FromLineOverride=YES [email protected] authpass=**** usestarttls=yes Am I transmitting my credentials in clear text? Is calling ssmtp a secure operation? Thanks.

  Read the article

• What are the effects of the L root server now publishing DURZ?

  - by brent

  I'm curious what the actual effects of the L root server publishing DURZ today will be. On the nanog mailing list, someone said it's important to evaluate the systemic effects of root name servers publishing signed zones, even when not using DNSSEC. Meanwhile, RIPE's own published information on their changes to the K root server say there's no issue if your resolvers don't use DNSSEC. Can someone please clear this up? DNSSEC seems to be a messy, tangled web. If not enabling DNSSEC on my resolvers, do I have anything to worry about with the upcoming changes to the root servers?

  Read the article

• Why did my zpool replace never finish and what should I do now?

  - by Josh

  I have a ZFS zpool with two disks in a mirror configuration, da0 and da1. da1 failed, and so I replaced it with da2 using zpool replace BearCow da1 da2 This ran for a few hours, during which zpool status showed that the array was being resilvered. When that finished, zpool status showed that the resilver was completed, but the array was still degraded... I tried a zpool scrub and a zpool clear, but the array still shows as degraded: [root@chef] ~# zpool status BearCow pool: BearCow state: DEGRADED scrub: scrub completed after 0h20m with 0 errors on Tue Oct 9 16:13:27 2012 config: NAME STATE READ WRITE CKSUM BearCow DEGRADED 0 0 0 mirror DEGRADED 0 0 0 da0 ONLINE 0 0 0 replacing DEGRADED 0 0 0 da1 OFFLINE 0 0 0 da2 ONLINE 0 0 0 errors: No known data errors I can't zpool replace BearCow da1 da2 anymore because da2 is already a member of BearCow... This is FreeBSD (FreeNAS) running ZFS pool version 15. How do I get my array to show as healthy again?

  Read the article

• Writing an internal disk from IMG, what XP software to use?

  - by Andrew Swift

  I am trying to install the Chromium OS on an EEE PC 901, and I have succeeded in using Image Writer for Windows 0.2r23 to copy the IMG file to an SDHC card. Since the OS speed is limited by slow card access, I'd like to install the Chromium OS on the second, unused, internal SSD Drive, D:. However, Image Writer doesn't allow me to restore an internal drive from an IMG file. To be clear: I boot in XP on C: then run Image Writer to install the Chromium OS. Does anyone know how I can either convince Image Writer that D: is a removable drive or know of alternative program that will let me restore D: from an IMG file (non-windows file system)?

  Read the article

• Windows 8 Unable to perform hibernate

  - by Jones

  Windows 8 Enterprise edition x86. Already enabled hibernate option, to have it on shutdown menu (start menu?) and set to hibernate on lid closing. However it's not hibernating for me. When I'm trying to sleep, it's sleep fine and wake up like a kid. But when I'm demanding hibernate, it disconnects internet, turn off screen and be back to lock screen in one second. Steps I've tried. Complete shutdown Clear hiberfile.sys by disabling and enabling back Resetting my power settings. Causes I suspect: Had dual boot with BackTrack with Windows 8 GUI boot manager. It was fine until I reinstall BackTrack, bootmgr resetted and I'm in Ubuntu boot menu;. Using additional hard disk through USB cable.(But it's not a problem before few days, however) How to make my system to hibernate and wakeup again.

  Read the article

• Cisco ASA 5505 (8.05): asymmetrical group-policy filter on an L2L IPSec tunnel

  - by gravyface

  I'm trying to find a way to setup a bi-directional L2L IPSec tunnel, but with differing group-policy filter ACLs for both sides. I have the following filter ACL setup, applied, and working on my tunnel-group: access-list ACME_FILTER extended permit tcp host 10.0.0.254 host 192.168.0.20 eq 22 access-list ACME_FILTER extended permit icmp host 10.0.0.254 host 192.168.0.20 According to the docs, VPN filters are bi-directional, you always specify the remote host first (10.0.0.254), followed by the local host and (optionally) port number, as per the documentation. However, I do not want the remote host to be able to access my local host's TCP port 22 (SSH) because there's no requirement to do so -- there's only a requirement for my host to access the remote host's SFTP server, not vice-versa. But since these filter ACLs are bidirectional, line 1 is also permitting the remote host to access my host's SSH Server. The documentation I'm reading doesn't seem to clear to me if this is possible; help/clarification much appreciated.

  Read the article

• Booting Windows7 kernel from an initrd/wim image file

  - by Ivo

  I'm wondering if it's possibile to have Win7 kernel and relative drivers (especially storage drivers) to boot from an initrd-like image file (maybe .wim?) and later then mount the windows root partition and complete the load of the full OS? I'll try to explain why: I'm running an emulated environment with NO REAL BIOS, and I'm passingthrough a raid storage controller. I want windows to boot from this controller array, but of course the BCD manager cannot access disks in the array until kernel and relative controller storage drivers are loaded. To be clear I get the classical winload.exe missing error. I need a similar solution to what Linux does, loading the kernel and his drivers, and later then mount the root partition and complete the boot. Any ideas or advices?

  Read the article

• Encrypt connection between apache web server and mysql server.

  - by microchasm

  I'm setting up a local webapp. I have a CentOS-5 box that will be the webserver (Apache 2.2). I have another box (RHEL5) that will be used only for MySQL. The data will be encrypted on the webserver via PHP before being sent to the MySQL box and inserted into the db. All web-based connections to the webserver will be encrypted via SSL. From the research I've done, it's not totally clear on whether or not there is a need to encrypt the connection to the db from webserver (NB paranoia level: Orange). If it is not overkill, or even if it is (unless it is a really bad idea for some reason), any advice or pointers on the direction to take to get this done would be appreciated.

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >