Search Results

Search found 6108 results on 245 pages for 'entry'.

Page 113/245 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• How to install OSX into VirtualBox on a Macbook Air using Apple's Reinstall USB

  - by eug

  I'm currently dual-booting OSX and Ubuntu on my Macbook Air, but it'd be nice to run OSX within Ubuntu via VirtualBox. This seems possible using VirtualBox and is legal - there's even a post on an Oracle blog describing this: http://blogs.oracle.com/karim/entry/installing_mac_os_x_in. Actually, I've read elsewhere that it's only legal with OSX Server, but can't find a reason why it'd be illegal with normal OSX - please let me know if you think otherwise. The problem I have is that a MacBook Air doesn't come with a bootable DVD, but with a "Reinstall Drive" which is a USB stick that comes up as a CDROM drive. It doesn't seem to be ISO9660-formatted though but has an Apple partition table, with OSX installed on an HFS partition. refit says that it has a "boot.efi" as well. I don't know Apple booting/partitioning very well and would really appreciate some advice on how to convert this USB into an ISO or boot it in VirtualBox some other way.

  Read the article

• How do I delete a route in OS X 10.5

  - by authormichael-olsen-craig

  I somehow configured my Mac to route all requests for a particular IP Name (sample.com) to the loopback address (127.0.0.1). Now I'm trying to remove this, but can't determine where to do it. There is no entry for it under /etc/hosts. The routing table shows that it is mapping the IP Name to the IP address of the Mac. Routing table output below: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.2.1 UGSc 4 1 en0 127 sample.com UCS 0 0 lo0 sample.com sample.com UH 1 7093 lo0 169.254 link#4 UCS 0 0 en0 192.168.2 link#4 UCS 6 0 en0 192.168.2.1 0:11:22:22:3f:fa UHLW 20 55565 en0 1070 192.168.2.15 tsema.org UHS 0 9 lo0 192.168.2.255 link#4 UHLWb 4 84777 en0 Any help would be greatly appreciated!

  Read the article

• DNSHost.exe trojan found, now after fix, no one can print

  - by Matt Dawdy

  What started today as an inability to get to the internet (but people could get in just fine), morphed to we realized that the DNS Server wasn't working, then we figured out that we had a trojan called DNSHost.exe (spybot.rl I think), and we disabled its service entry and deleted the offending file and all registry keys told to use by the Trend Micro site. Now, we can get on the internet, but the printer being served by this machine (called server2) cannot be printed to from any client machine on the network. We get the error "The RPC Server is unavailable". I'm assuming that this is related to the DNS issue we had earlier, as we were able to print just fine until this fun happiness started this morning. Anyone have any solid suggestions? Windows Server 2003 R2 SP2, and the client machine are all Windows XP SP2.

  Read the article

• IBM storage ds3400 Cant connect to management using fiber

  - by Eli B

  i have a problem with a DS3400 IBM storage system we bought a few years back. when i try to manage the storage using its IBM storage management i cant find it using automatic detection even though its connected directly using the fiber and i can see the Logical drives connected and working properly. when i tried to connect the two management Ethernet wires and manage the storage directly by entering the IP address manually i am able to connect however after i make several changes to the controller configuration one of the controllers stops responding and i am not able to ping it directly (since you cant make any changes without being connected to both controllers this is a problem) whats more bizarre is that when i change the IP of the controller that doesn't respond it starts working .. i have found some articles over the web explaining stuff about LUN31 being missing and causing similar problems however all my attempts to manually configure it failed . *link to an example http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5075711 in short im trying to get my storage to appear in the storage manager when directly connected using only the fiber cable directly attached. thanks in advance

  Read the article

• Trouble with NFS file sharing on Synology 211 NAS and Ubuntu Client

  - by Aglystas

  I'm attempting to set up NFS file sharing and keep getting the error mount.nfs: access denied by server while mounting 192.168.1.110:/myshared Here is the exact command I'm using to mount: sudo mount -o nolock 192.168.1.110:/myshared /home/emiller/MyShared I have set 'Enabled NFS' in DSM and set NFS priviledges in the the Shares section of the control panel. Here is the /etc/exports entry from the NAS: volume1/myshared 192.168.1.*(rw,sync,no_wdelay,no_root_squash,insecure_locks,anonuid=0,anongid=0) I read some things about the hosts.allow and hosts.deny but it seems like if they are empty they aren't used for anything. I can see the share when I run ... showmount -e 192.168.1.110 Any help would be appreciated in this matter.

  Read the article

• Write permission when mounting Windows shares from Ubuntu

  - by Ola Tuvesson

  I think I'm close to having my dev environment set up exactly the way I want, but one final snag remains. I'm running VirtualBox on a Windows 7 64bit host, with my dev enviroment inside a Ubuntu 12.04 guest. I want to keep the files for my projects on the host filesystem - partly so I can access them when the Ubuntu guest is not running, but also so I can use Tortoise and other Windows based tools (cough Photoshop), and it also eases my backup scheme somewhat. So I've got a folder "Rails" on my NTFS drive, which I've shared from the host with a user specifically created for the Ubuntu guest. The mount point has been set up and an entry added to fstab (cifs), using a credentials file and the options iocharset=utf8,file_mode=0777,dir_mode=07??77 This mounts fine and my Ubuntu user has both read and write permissions to the contents, but when I try to start my Rails app I get permission errors on any files the app needs to write to (e.g. the log file). What gives?

  Read the article

• Postfix sends to original recipient name instead of alias name

  - by user141742

  I have setup Postfix as part of my ISPConfig implementation. It should just forward all mail. Clients should be able to define a new alias and receive mail on a different e-mail address, using ISPConfig. Example: A mail sent to [email protected] on my ISPConfig server should be forwarded to external mailbox [email protected] This works fine but one important thing. When opening the mailbox for [email protected] I see the mail with the original sender name, and the original recipient name, i.e. [email protected] I have tried the forward function and the send copy function on a mailbox in ISPConfig. Both cases show the original recipient [email protected] instead of the final recipient [email protected], as it would when I manually forward an e-mail. Can this be achieved without having to maintain a list for each entry? Thanks for looking into this. M.

  Read the article

• Shell script with ImageMagick: hangs forever?

  - by AP257

  I've generated a shell script that uses ImageMagick to convert and crop around 18000 images. Here's a sample entry (so there are 18000 of these): if [ ! -f ./cropped/16333-1.png ] then convert -crop 724x118+876+1989 ./lin/34.png ./cropped/16333-1.png echo cropping 16333-1 fi if [ ! -f ./cropped/16333-1_thumb.png ] then convert -define jpeg:size=400x100 ./cropped/16333-1.png -thumbnail '400x100>' -background transparent -gravity center -extent 400x100 ./cropped/16333-1_thumb.png echo thumbing 16333-1 fi The script only runs for about 2000 images before hanging forever. Am I missing something, or leaking memory somewhere? Thanks for your help!

  Read the article

• Does Exchange 2010 lift the restriction that DL addresses must be in Active Directory?

  - by Justin Grant

  We'd like to enable end-users to be able to create and maintain their own email distribution lists in Exchange 2010, where those lists may include users inside the company but also customers, partners, etc. who are outside the company. One of the limitations in Exchange 2007 (see this question) was that any member of a DL had to have an entry in active directory. You couldn't just take a group of email addresses (both inside and outside my company) and create an Exchange DL with those addresses without involving Active Directory admins to create entries for each external user. For a company creating hundreds of small mailing lists every month, this was an unacceptable IT expense. So we had to use a separate mailing list solution (GNU mailman) for DLs which included external users. Is this limitation relaxed in Exchange 2010 so we can throw away GNU mailman and use Exchange instead?

  Read the article

• Windows xp problems

  - by anca

  I had problems with web virus cake 3.00 and I downloaded Malwarebytes Anti-WALWARE, I got rid of that virus but I did other problems. When I open my PC appears to skype error "exception in module Skype.exe at 0013CE7D.The EOleSysError RPC server is unavailable" and another one "Error in C: \ WINDOWS \ system32 \ Nvcpl.Dll Missing entry: NnStartup" when I install / uninstall a program says "Windows Installer service Could you not be accessed. This CAN occure if you are running Windows in safe mode, or if the Windows Installer is not corectly installes. Contact your support personnel for assistance. I have tried many "solutions" but nothing worked. Please HELP! It windows xp sp 2

  Read the article

• Exchange 2007: relay only from selected servers based on rDNS

  - by Frank

  I'm looking for a way to make Exchange 2007 only accept mail from a certain group of hosts. These hosts all use the same identifying rDNS entry. Exchange 2003 uses a whitelist based on the reverse DNS, there we could add the hostname to the to the "Domain" field. However, in Exchange 2007 this option seems to be removed. Is there a way to do this? IP's however tend to change. These changes can occur at any time, and it is impossible to keep all the servers up-to-date to the new IP's. Running a script that resolves the hostname and whitelists them accordingly is my last-resort option, but this is not fool-proof. Does anyone know whether this is possible and if so, how? Thanks!

  Read the article

• Bulk inserting and updating with Entity Framework (Probably a better alternative?)

  - by Dave

  I have a data set of devices, addresses, and companies that I need to import into our database, with the catch that our database may already include a specific device/address/company that is included in the new data set. If that is the case, I need to update that entry with the new information in the data set, excluding addresses. We check if an exact copy of that address exists, otherwise we make a new entry. My issue is that it is very slow to attempt to grab a device/company in EF and if it exist updated it, otherwise insert it. To fix this I tried to get all the companies, devices, and addresses and insert them into respective hashmaps, and check if the identifier of the new data exists in the hashmap. This hasn't led to any performance increases. I've included my code below. Typically I would do a batch insert, I'm not sure what I would do for a batch update though. Can someone advise a different route? var context = ObjectContextHelper.CurrentObjectContext; var oldDevices = context.Devices; var companies = context.Companies; var addresses = context.Addresses; Dictionary<string, Company> companyMap = new Dictionary<string, Company>(StringComparer.OrdinalIgnoreCase); Dictionary<string, Device> deviceMap = new Dictionary<string, Device>(StringComparer.OrdinalIgnoreCase); Dictionary<string, Address> addressMap = new Dictionary<string, Address>(StringComparer.OrdinalIgnoreCase); foreach (Company c in companies) { if (c.CompanyAccountID != null && !companyMap.ContainsKey(c.CompanyAccountID)) companyMap.Add(c.CompanyAccountID, c); } foreach (Device d in oldDevices) { if (d.SerialNumber != null && !deviceMap.ContainsKey(d.SerialNumber)) deviceMap.Add(d.SerialNumber, d); } foreach (Address a in addresses) { string identifier = GetAddressIdentifier(a); if (!addressMap.ContainsKey(identifier)) addressMap.Add(identifier, a); } foreach (DeviceData.TabsDevice device in devices) { // update a device Company tempCompany; Address tempAddress; Device currentDevice; if (deviceMap.ContainsKey(device.SerialNumber)) //update a device deviceMap.TryGetValue(device.SerialNumber, out currentDevice); else // insert a new device currentDevice = new Device(); currentDevice.SerialNumber = device.SerialNumber; currentDevice.SerialNumberTABS = device.SerialNumberTabs; currentDevice.Model = device.Model; if (device.CustomerAccountID != null && device.CustomerAccountID != "") { companyMap.TryGetValue(device.CustomerAccountID, out tempCompany); currentDevice.CustomerID = tempCompany.CompanyID; currentDevice.CustomerName = tempCompany.CompanyName; } if (companyMap.TryGetValue(device.ServicingDealerAccountID, out tempCompany)) currentDevice.CompanyID = tempCompany.CompanyID; currentDevice.StatusID = 1; currentDevice.Retries = 0; currentDevice.ControllerFamilyID = 1; if (currentDevice.EWBFrontPanelMsgOption == null) // set the Panel option to the default if it isn't set already currentDevice.EWBFrontPanelMsgOption = context.EWBFrontPanelMsgOptions.Where( i => i.OptionDescription.Contains("default")).Single(); // link the device to the existing address as long as it is actually an address if (addressMap.TryGetValue(GetAddressIdentifier(device.address), out tempAddress)) { if (GetAddressIdentifier(device.address) != "") currentDevice.Address = tempAddress; else currentDevice.Address = null; } else // insert a new Address and link the device to it (if not null) { if (GetAddressIdentifier(device.address) == "") currentDevice.Address = null; else { tempAddress = new Address(); tempAddress.Address1 = device.address.Address1; tempAddress.Address2 = device.address.Address2; tempAddress.Address3 = device.address.Address3; tempAddress.Address4 = device.address.Address4; tempAddress.City = device.address.City; tempAddress.Country = device.address.Country; tempAddress.PostalCode = device.address.PostalCode; tempAddress.State = device.address.State; addresses.AddObject(tempAddress); addressMap.Add(GetAddressIdentifier(tempAddress), tempAddress); currentDevice.Address = tempAddress; } } if (!deviceMap.ContainsKey(device.SerialNumber)) // if inserting, add to context { oldDevices.AddObject(currentDevice); deviceMap.Add(device.SerialNumber, currentDevice); } } context.SaveChanges();

  Read the article

• How to set up Windows server 2008 to receive email?

  - by Saul

  First off apologies, I'm from a medical background not a networking one, but I've got roped into setting up a windows 2008 server. So far web server running, fixed IP address assigned (within a large private network of the National Health Service in the UK if that makes any difference) and the network team have assigned a DNS entry for me which works, so the server can be addressed as nww.myserver.nhs.uk I've only got ports open on the router for 80 and 443 (http and https) at the moment, so presume I need a different port to enable email services. My need is to be able to accept an email to the domain name like [email protected] in order to pick up a confirmation mail from an SSL issuer (Comodo) I guess to confirm that I control the domain. After that I don't actually need mail services on the server. I see lots of stuff about setting up SMTP services but thought that was about mail out and re-routing, but how do you get the server to "listen" for mail to the domain (assuming I open port xyz or whatever it is) ?

  Read the article

• How to change theme in Windows 7 with Powershell script?

  - by Greg McGuffey

  I would like to have a script that would change the current theme of Windows 7. I found the registry entry where this stored, but I apparently need to take some further action to get windows to load the theme. Any ideas? Here is the script that I'm trying to use, but isn't working (registry updated, but theme not changed): ###################################### # Change theme by updating registry. # ###################################### # Define argument which defines which theme to apply. param ( [string] $theme = $(Read-Host -prompt "Theme") ) # Define the themes we know about. $knownThemes = @{ "myTheme" = "mytheme.theme"; "alien" = "oem.theme" } # Identify paths to user themes. $userThemes = " C:\Users\yoda\AppData\Local\Microsoft\Windows\" # Get name of theme file, based on theme provided $themeFile = $knownThemes["$theme"] # Build path to theme and set registry. $newThemePath = "$userThemes$themeFile" $regPath = "HKCU:\Software\Microsoft\Windows\CurrentVersion\Themes\" Set-ItemProperty -path $regPath -name CurrentTheme -value $newThemePath # Update system with this info...this isn't working! rundll32.exe user32.dll, UpdatePerUserSystemParameters Thanks!

  Read the article

• setting up Ubuntu 10.10 as paravirtualized guest in Xen on RHEL5 host - what kernel?

  - by kostmo

  I've discovered the tool ubuntu-vm-builder, which I've installed and then invoked on an Ubuntu workstation as: sudo vmbuilder xen ubuntu --suite maverick --flavour virtual --arch amd64 --mem=512 --rootsize 8192 This workstation is not the intended target host of the virtual machine, however; I would like to host the guest on a Red Hat Enterprise Linux 5 machine that is running Xen 3.0.3. The output of this command appears to be a folder named ubuntu-xen containing three files: tmpXXXXXX, a very large file which I assume is the root partition image tmpYYYYYY, a somewhat large file which I assume is the swap partition image xen.conf, a text file I have copied the xen.conf file to the RHEL server's /etc/xen directory under the new name newvm, adjusting the paths of tempXXXXXX and tempYYYYYYin the file after also copying them from my local workstation to the RHEL server. When I launch the Virtual Machine Manager virt-manager, I can see the newvm virtual machine listed underneath the Dom0 machine. When I try to start newvm, I get the error: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: None') Indeed, there exists an entry kernel = 'None' in the xen.conf file. How do I find out what the path of the kernel should be? Is this path supposed to be to a kernel stored on the local filesystem of the RHEL5 host, or is it supposed to be a path inside the guest image? I see that the vmbuilder command provides for a --xen-kernel option, along with a --xen-ramdisk option, but I'm not sure what to use for either. I think I should be able to get this to work, since Ubuntu is said to be supported as a Xen guest, even though the Xen 4.0.1 docs state support for only a limited set of distributions, Ubuntu excluded. Update 1 When running vmbuilder on my local workstation, I did observe an output line saying: Calling hook: install_kernel and later, output lines saying: update-initramfs: Generating /boot/initrd.img-2.6.35-23-virtual [...] run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.35-23-virtual /boot/vmlinuz-2.6.35-23-virtual So in the xen.conf file, I tried setting the lines: kernel = '/boot/vmlinuz-2.6.35-23-virtual' ramdisk = '/boot/initrd.img-2.6.35-23-virtual' When trying to start the VM, I got an error similar to last time: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: /boot/vmlinuz-2.6.35-23-virtual') This makes me think that the RHEL5 machine is looking for local files, rather than a file within the binary guest disk image. After running sudo updatedb on my workstation, neither of those files were found. If the vmbuilder tool had tried to install them, it must have failed. Update 2 I was able to extract the kernel and initrd images from the guest disk binary by mounting it: mkdir mnt_tmp sudo mount ubuntu-xen/tmpXXXXXX mnt_tmp/ -o loop cp mnt_tmp/boot/vmlinuz-2.6.35-23-virtual virtual_kernel_ubuntu cp mnt_tmp/boot/initrd.img-2.6.35-23-virtual virtual_initrd_ubuntu These two files I copied to the RHEL5 server, and edited the xen.conf file to point to them as kernel and ramdisk. With this done, I could "run" the newvm virtual machine from within virt-manager, but was met with the message Console Not Configured For Guest when I double clicked the entry to open the Virtual Machine Console. As suggested by a forum, I then added the line vfb = [ 'type=vnc' ] to the configuration file, recreated the virtual machine (a ~10 min process), and this time got the message: Connecting to console for guest This remained indefinitely; after selecting View - Serial Console, I found a kernel panic: [5442621.272173] Kernel panic - not syncing: Attempted to kill the idle task! [5442621.272179] Pid: 0, comm: swapper Tainted: G D 2.6.35-23-virtual #41-Ubuntu [5442621.272184] Call Trace: [5442621.272191] [<ffffffff815a1b81>] panic+0x90/0x111 [5442621.272199] [<ffffffff810652ee>] do_exit+0x3be/0x3f0 [5442621.272204] [<ffffffff815a5e20>] oops_end+0xb0/0xf0 [5442621.272211] [<ffffffff8100ddeb>] die+0x5b/0x90 [5442621.272216] [<ffffffff815a56c4>] do_trap+0xc4/0x170 [5442621.272221] [<ffffffff8100ba35>] do_invalid_op+0x95/0xb0 [5442621.272227] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272232] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272239] [<ffffffff815a48fe>] ? _raw_spin_unlock_irqrestore+0x1e/0x30 [5442621.272247] [<ffffffff8108dfb7>] ? tick_broadcast_oneshot_control+0xc7/0x120 [5442621.272253] [<ffffffff8100ad5b>] invalid_op+0x1b/0x20 [5442621.272259] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272264] [<ffffffff813084e0>] ? intel_idle+0x70/0x180 [5442621.272269] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272275] [<ffffffff8148a147>] cpuidle_idle_call+0xa7/0x140 [5442621.272281] [<ffffffff81008d93>] cpu_idle+0xb3/0x110 [5442621.272286] [<ffffffff815873aa>] rest_init+0x8a/0x90 [5442621.272291] [<ffffffff81b04c9d>] start_kernel+0x387/0x390 [5442621.272297] [<ffffffff81b04341>] x86_64_start_reservations+0x12c/0x130 [5442621.272303] [<ffffffff81b08002>] xen_start_kernel+0x55d/0x561 Update 3 I tried an i386 architecture instead of amd64, but got the same kernel panic. Also, it seems the Virtual Machine Manager pays attention to the format of the filename of the kernel; for the same kernel binary, I tried simply naming it vmlinuz-virtual, which threw out an error box about an invalid kernel. When I named it vmlinuz-2.6.35-23-virtual, it did not throw the error, but it did still result in the kernel panic shortly thereafter.

  Read the article

• Disable spell checking in IE 11 (Win 8.1)

  - by ComFreek

  I have the same Problem as described here: Disable spell checking in Internet Explorer 10 (Windows 8) My system: Windows 8.1 Pro 64-bit What I've already done: Deactivating the spelling options: (There may be minor differences between the following screenshot and the actual 8.1 display. I copied it from here because I own a German Version and I therefore thought that an English one would be simpler to understand.) I turned both options off and tried to restart IE. It's still "correcting" my texts. Searching for 'spelling correction' addons As said in the picture, this entry does not exist on my PC. (The following screenshot is taken from here) Is there any way of disabling it? I prefer an "official" solution if one is available. Otherwise, I also take any registry involving Solutions.

  Read the article

• where.exe does not find OpenSSL libs when %ProgramFiles% variable is used in the PATH environment variable

  - by Piotr Dobrogost

  I installed both 32bit and 64bit version of OpenSSL libs on Vista x64. The 32bit version was installed in c:\Program Files (x86)\OpenSSL and the 64bit version was installed in c:\Program Files\OpenSSL. Then I added the entry %ProgramFiles%\OpenSSL to the PATH environment variable. %ProgramFiles%\OpenSSL is expanded to c:\Program Files (x86)\OpenSSL for 32bit programs and it's expanded to c:\Program Files\OpenSSL for 64bit programs. The idea is to have 32bit programs use 32bit version of OpenSSL libs and 64bit programs use 64bit version. I wanted to check if this works by running 32bit cmd.exe and issuing where ssleay32.dll and then by running 64bit cmd.exe and issuing the same. However in both cases I get the error INFO: Could not find files for the given pattern(s). What's wrong? This is a follow up to Different PATH environment variable for 32bit and 64bit Windows - is it possible?

  Read the article

• Sun Java keytool importing EV certificates into a single keystore

  - by ss0

  At my current job we are using tomcat, customers have custom web portals setup on their own local machines. EV certs are new to me, they have 2 part intermediary and a primary certificate. For our product to work it appears I need to get all three parts installed under a single keystore entry. How can I roll all three parts into a single x.509 compliant file for import? They syntax I am using is as follows: /blah/system/j2sdk/bin/keytool -import -alias foo -keystore /zix/system/jdk1.5.0_06/jre/lib/security/cacerts -file certname.pem -trustcacerts where foo = the keystore name and certname.pem is the main cert. I have tried importing the intermediate certs under their own names into the keystore and I don't know if it's just the product I have to work with (not vanilla tomcat) or what but it doesn't see those. I have seen a working system and all three certs were under the single keystore alias. Anyone have any ideas?

  Read the article

• Routing table change to access Internet over mifi

  - by Randall Blake

  I have two networks at home. One uses a Verizon mifi wireless on 192.168.1.1. The other uses a dlink router on 192.168.0.1. I have one laptop with two nics, one wireless and one not. The wireless nic connects to the mifi. The Ethernet nic connects to the dlink router. It's ip is 192.168.0.2. I also have a laptop with only one nic connected to the dlink on 192.168.0.3. I want to connect laptop 2 to the Internet. Can I do that by adding an entry to the routing table so that destination 0.0.0.0 routes to 192.168.0.2? If I do that, will laptop 1 "know" that it should route traffic from 192.168.0.3 to 192.168.1.1? Thanks for any assistance.

  Read the article

• Smart subdomain routing via reverse proxy

  - by Trevor Hartman

  I have two servers on my home network: OSX Server and an Ubuntu Server. I'd love to have external subdomains osx.mydomain.com point to osx and ubuntu.mydomain.com point to ubuntu. I know the normal way to do this is to have a static external IP address for each, but that's not an option as this is just my home setup. My question is: is there a way to do this with some reverse proxy trickery? OSX is currently the default entry point for all traffic. I was able to setup a reverse proxy on OSX for ubuntu.mydomain.com on port 80, so web traffic was correctly being proxied to my ubuntu. I'd like to ssh and do a bunch of other stuff though!

  Read the article

• PHP: Writing non-english characters to XML - encoding problem

  - by Dean

  Hello, I wrote a small PHP script to edit the site news XML file. I used DOM to manipulate the XML (Loading, writing, editing). It works fine when writing English characters, but when non-English characters are written, PHP throws an error when trying to load the file. If I manually type non-English characters into the file - it's loaded perfectly fine, but if PHP writes the non-English characters the encoding goes wrong, although I specified the utf-8 encoding. Any help is appreciated. Errors: Warning: DOMDocument::load() [domdocument.load]: Entity 'times' not defined in filepath Warning: DOMDocument::load() [domdocument.load]: Input is not proper UTF-8, indicate encoding ! Bytes: 0x91 0x26 0x74 0x69 in filepath Here are the functions responsible for loading and saving the file (self-explanatory): function get_tags_from_xml(){ // Load news entries from XML file for display $errors = Array(); if(!$xml_file = load_news_file()){ // Load file // String indicates error presence $errors = "file not found"; return $errors; } $taglist = $xml_file->getElementsByTagName("text"); return $taglist; } function set_news_lang(){ // Sets the news language global $news_lang; if($_POST["news-lang"]){ $news_lang = htmlentities($_POST["news-lang"]); } elseif($_GET["news-lang"]){ $news_lang = htmlentities($_GET["news-lang"]); } else{ $news_lang = "he"; } } function load_news_file(){ // Load XML news file for proccessing, depending on language global $news_lang; $doc = new DOMDocument('1.0','utf-8'); // Create new XML document $doc->load("news_{$news_lang}.xml"); // Load news file by language $doc->formatOutput = true; // Nicely format the file return $doc; } function save_news_file($doc){ // Save XML news file, depending on language global $news_lang; $doc->saveXML($doc->documentElement); $doc->save("news_{$news_lang}.xml"); } Here is the code for writing to XML (add news): <?php ob_start()?> <?php include("include/xml_functions.php")?> <?php include("../include/functions.php")?> <?php get_lang();?> <?php //TODO: ADD USER AUTHENTICATION! if(isset($_POST["news"]) && isset($_POST["news-lang"])){ set_news_lang(); $news = htmlentities($_POST["news"]); $xml_doc = load_news_file(); $news_list = $xml_doc->getElementsByTagName("text"); // Get all existing news from file $doc_root_element = $xml_doc->getElementsByTagName("news")->item(0); // Get the root element of the new XML document $new_news_entry = $xml_doc->createElement("text",$news); // Create the submited news entry $doc_root_element->appendChild($new_news_entry); // Append submited news entry $xml_doc->appendChild($doc_root_element); save_news_file($xml_doc); header("Location: /cpanel/index.php?lang={$lang}&news-lang={$news_lang}"); } else{ header("Location: /cpanel/index.php?lang={$lang}&news-lang={$news_lang}"); } ?> <?php ob_end_flush()?>

  Read the article

• information about /proc/pid/sched

  - by redeye

  Not sure this is the right place for this question, but here goes: I'm trying to make some sense of the /proc/pid/sched and /proc/pid/task/tid/sched files for a highly threaded server process, however I was not able to find a good explanation of how to interpret this file ( just a few bits here: http://knol.google.com/k/linux-performance-tuning-and-measurement# ) . I assume this entry in procfs is related to newer versions of the kernel that run with the CFS scheduler? CentOS distro running on a 2.6.24.7-149.el5rt kernel version with preempt rt patch. Any thoughts?

  Read the article

• How to set global PATH on OS X Server 10.6.6?

  - by Adam Lindberg

  I'm running Tomcat on OS X Server 10.6.6 under the normal Web component that comes with the OS. This has worked fine so far, but I need to add some entries to the $PATH environment variable for programs that I want access to from the web server (more specifically, I'm running Hudson under Tomcat which needs access to build tools that I have installed). Tomcat and the Web component seems to run under the user _appserver which has a different $PATH than the administrator account. What's the proper way to add a global entry to the $PATH in OS X Server for the Web component? Preferable it should be done only once so that both the _appserver and Administrator user can access the same $PATH. EDIT: Adding the path to /etc/paths or /etc/paths.d/somefile didn't work. Tomcat and Hudson does still not see those directories.

  Read the article

• I got these strange messages on my websites feedback form? Is someone trying to hack my site?

  - by Ali

  Hi guys - I got all of a sudden a number of strange feedback messages from my sites feedback form its where normally users would come and enter feedback and then I would review it on an admin panel. However these messages make little to no sense like for an example: here are two 'messages': 2GyOim <a href=\"http://vdjzpnoyzfji.com/\">vdjzpnoyzfji</a>, [url=http://gixlpbtswcdh.com/]gixlpbtswcdh[/url], [link=http://zudauexgjgot.com/]zudauexgjgot[/link], http://vqhafprwogyf.com/ jF2wdU <a href=\"http://aprjkscbhnxf.com/\">aprjkscbhnxf</a>, [url=http://dhfeoqufoqvu.com/]dhfeoqufoqvu[/url], [link=http://whmzpbqrsume.com/]whmzpbqrsume[/link], http://xxfntqzhhbza.com/ I got about over a dozen of these - and they are all from very different ips is someone playing around and is it a cause for me to get vigilant? Also they all have the exact same time and date of entry which is spooky?

  Read the article

• Win7 OpenSSH config: no address associated with name

  - by Jonah

  I am using OpenSSH on win7. My home dir is C:\Users\JG, and inside that dir I have the file C:\Users\JG\.ssh\config, with these contents: Host <redacted server ip here> HostName digitalocean_git User git IdentityFile ~/.ssh/digitalocean_moocho/id_rsa The id file pointed to by the "IdentityFile" entry works, as I use it just fine via putty, but for this problem I am trying to get command line OpenSSH working. The crux of the problem is explained by this output: >ssh -v digitalocean_git OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Reading configuration data /c/Users/JG/.ssh/config ssh: digitalocean_git: no address associated with name Why is no address associated with the name? How can I make this work?

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >