Search Results

Search found 3987 results on 160 pages for 'captain obvious'.

Page 114/160 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

  • Regex: Use start of line/end of line signs (^ or $) in different context

    - by fgysin
    While doing some small regex task I came upon this problem. I have a string that is a list of tags that looks e.g like this: foo,bar,qux,garp,wobble,thud What I needed to do was to check if a certain tag, e.g. 'garp' was in this list. (What it finally matches is not really important, just if there is a match or not.) My first and a bit stupid try at this was to use the following regex: [^,]garp[,$] My idea was that before 'garp' there should either be the start of the line/string or a comma, after 'garp' there should be either a comma or the end of the line/string. Now, it is instantly obvious that this regex is wrong: Both ^ and $ change their behaviour in the context of the character class [ ]. What I finally came up with is the following: ^garp$|^garp,|,garp,|,garp$ This regex just handles the 4 cases one by one. (Tag at beginning of list, in the center, at the end, or as the only element of the list.) The last regex is somehow a bit ugly in my eyes and just for funs sake I'd like to make it a bit more elegant. Is there a way how the start of line/end of line characters (^ and $) can be used in the context of character classes?

    Read the article

  • Objective-C Protocols within Protocols

    - by LucasTizma
    I recently began trying my hand at using protocols in my Objective-C development as an (obvious) means of delegating tasks more appropriately among my classes. I completely understand the basic notion of protocols and how they work. However, I came across a roadblock when trying to create a custom protocol that in turn implements another protocol. I since discovered the solution, but I am curious why the following DOES NOT work: @protocol STPickerViewDelegate < UIPickerViewDelegate > - ( void )customCallback; @end @interface STPickerView : UIPickerView { id < STPickerViewDelegate > delegate; } @property ( nonatomic, assign ) id < STPickerViewDelegate > delegate; @end Then in a view controller, which conforms to STPickerViewDelegate: STPickerView * pickerView = [ [ STPickerView alloc ] init ]; pickerView.delegate = self; - ( void )customCallback { ... } - ( NSString * )pickerView:( UIPickerView * )pickerView titleForRow:( NSInteger )row forComponent:( NSInteger )component { ... } The problem was that pickerView:titleForRow:forComponent: was never being called. On the other hand, customCallback was being called just fine, which isn't too surprising. I don't understand why STPickerViewDelegate, which itself conforms to UIPickerViewDelegate, does not notify my view controller when events from UIPickerViewDelegate are supposed to occur. Per my understanding of Apple's documentation, if a protocol (A) itself conforms to another protocol (B), then a class (C) that conforms to the first protocol (A) must also conform to the second protocol (B), which is exactly the behavior I want and expected. What I ended up doing was removing the id< STPickerViewDelegate > delegate property from STViewPicker and instead doing something like the following in my STViewPicker implementation where I want to evoke customCallback: if ( [ self.delegate respondsToSelector:@selector( customCallback ) ] ) { [ self.delegate performSelector:@selector( customCallback ) ]; } This works just fine, but I really am puzzled as to why my original approach did not work.

    Read the article

  • How to Create Deterministic Guids

    - by desigeek
    In our application we are creating Xml files with an attribute that has a Guid value. This value needed to be consistent between file upgrades. So even if everything else in the file changes, the guid value for the attribute should remain the same. One obvious solution was to create a static dictionary with the filename and the Guids to be used for them. Then whenever we generate the file, we look up the dictionary for the filename and use the corresponding guid. But this is not feasible coz we might scale to 100's of files and didnt want to maintain big list of guids. So another approach was to make the Guid the same based on the path of the file. Since our file paths and application directory structure are unique, the Guid should be unique for that path. So each time we run an upgrade, the file gets the same guid based on its path. I found one cool way to generate such 'Deterministic Guids' (Thanks Elton Stoneman). It basically does this: private Guid GetDeterministicGuid(string input) { //use MD5 hash to get a 16-byte hash of the string: MD5CryptoServiceProvider provider = new MD5CryptoServiceProvider(); byte[] inputBytes = Encoding.Default.GetBytes(input); byte[] hashBytes = provider.ComputeHash(inputBytes); //generate a guid from the hash: Guid hashGuid = new Guid(hashBytes); return hashGuid; } So given a string, the Guid will always be the same. Are there any other approaches or recommended ways to doing this? What are the pros or cons of that method?

    Read the article

  • Can't send client certificate via SslStream

    - by Jonathan
    I am doing an SSL3 handshake using an SslStream, but, in spite of my best efforts, the SslStream never sends a client certificate on my behalf. Here is the code: SSLConnection = new System.Net.Security.SslStream(SSLInOutStream, false, new System.Net.Security.RemoteCertificateValidationCallback(AlwaysValidRemoteCertificate), new System.Net.Security.LocalCertificateSelectionCallback(ChooseLocalCertificate)); X509CertificateCollection CC = new X509CertificateCollection(); CC.Add(Org.BouncyCastle.Security.DotNetUtilities.ToX509Certificate(MyLocalCertificate)); SSLConnection.AuthenticateAsClient("test", CC, System.Security.Authentication.SslProtocols.Ssl3, false); and then I have AlwaysValidRemoteCertificate just returning true, and ChooseLocalCertificate returning the zeroth element of the array. The code probably looks a little weird because the project is a little weird, but I think that is beside the point here. The SSL handshake completes. The issue is that instead of sending a certificate message on my behalf (in the handshake process), with the ASN.1 encoded certificate (MyLocalCertificate), the SslStream sends an SSL alert number 41 (no certificate) and then carries on. I know this from packet sniffing. After the handshake is completed, the SslStream marks IsAuthenticated as true, IsMutuallyAuthenticated as false, and its LocalCertificate member is null. I feel like I'm probably missing something pretty obvious here, so any ideas would be appreciated. I am a novice with SSL, and this project is off the beaten path, so I am kind of at a loss. P.S. 1: My ChooseLocalCertificate routine is called twice during the handshake, and returns a valid (as far as I can tell), non-null certificate both times. P.S. 2: SSLInOutStream is my own class, not a NetworkStream. Like I said, though, the handshake proceeds mostly normally, so I doubt this is the culprit... but who knows?

    Read the article

  • Should all public methods of an API be documented?

    - by cynicalman
    When writing "library" type classes, is it better practice to always write markup documentation (i.e. javadoc) in java or assume that the code can be "self-documenting"? For example, given the following method stub: /** * Copies all readable bytes from the provided input stream to the provided output * stream. The output stream will be flushed, but neither stream will be closed. * * @param inStream an InputStream from which to read bytes. * @param outStream an OutputStream to which to copy the read bytes. * @throws IOException if there are any errors reading or writing. */ public void copyStream(InputStream inStream, OutputStream outStream) throws IOException { // copy the stream } The javadoc seems to be self-evident, and noise that just needs to be updated if the funcion is changed at all. But the sentence about flushing and not closing the stream could be valuable. So, when writing a library, is it best to: a) always document b) document anything that isn't obvious c) never document (code should speak for itself!) I usually use b), myself (since the code can be self-documenting otherwise)...

    Read the article

  • Issue with IHttpHandler and relative URLs

    - by vtortola
    Hi, I've developed a IHttpHandler class and I've configured it as verb="*" path="*", so I'm handling all the request with it in an attempt of create my own REST implementation for a test web site that generates the html dynamically. So, when a request for a .css file arrives, I've to do something like context.Response.WriteFile(Server.MapPath(url)) ... same for pictures and so on, I have to response everything myself. My main issue, is when I put relative URLs in the anchors; for example, I have main page with a link like this <a href="page1">Go to Page 1</a> , and in Page 1 I have another link <a href="page2">Go to Page 2</a>. Page 1 and 2 are supposed to be at the same level (http://host/page1 and http://host/page2, but when I click in Go to Page 2, I got this url in the handler: ~/page1/~/page2 ... what is a pain, because I have to do an url = url.SubString(url.LastIndexOf('~')) for clean it, although I feel that there is nothing wrong and this behavior is totally normal. Right now, I can cope with it, but I think that in the future this is gonna bring me some headache. I've tried to set all the links with absolute URLs using the information of context.Request.Url, but it's also a pain :D, so I'd like to know if there is a nicer way to do these kind of things. Don't hesitate in giving me pretty obvious responses because I'm pretty new in web development and probably I'm skipping something basic about URLs, Http and so on. Thanks in advance and kind regards.

    Read the article

  • Implementing the ‘defer’ statement from Go in Objective-C?

    - by zoul
    Hello! Today I read about the defer statement in the Go language: A defer statement pushes a function call onto a list. The list of saved calls is executed after the surrounding function returns. Defer is commonly used to simplify functions that perform various clean-up actions. I thought it would be fun to implement something like this in Objective-C. Do you have some idea how to do it? I thought about dispatch finalizers, autoreleased objects and C++ destructors. Autoreleased objects: @interface Defer : NSObject {} + (id) withCode: (dispatch_block_t) block; @end @implementation Defer - (void) dealloc { block(); [super dealloc]; } @end #define defer(__x) [Defer withCode:^{__x}] - (void) function { defer(NSLog(@"Done")); … } Autoreleased objects seem like the only solution that would last at least to the end of the function, as the other solutions would trigger when the current scope ends. On the other hand they could stay in the memory much longer, which would be asking for trouble. Dispatch finalizers were my first thought, because blocks live on the stack and therefore I could easily make something execute when the stack unrolls. But after a peek in the documentation it doesn’t look like I can attach a simple “destructor” function to a block, can I? C++ destructors are about the same thing, I would create a stack-based object with a block to be executed when the destructor runs. This would have the ugly disadvantage of turning the plain .m files into Objective-C++? I don’t really think about using this stuff in production, I’m just interested in various solutions. Can you come up with something working, without obvious disadvantages? Both scope-based and function-based solutions would be interesting.

    Read the article

  • String length differs from Javascript to Java code

    - by François P.
    I've got a JSP page with a piece of Javascript validation code which limits to a certain amount of characters on submit. I'm using a <textarea> so I can't simply use a length attribute like in a <input type="text">. I use document.getElementById("text").value.length to get the string length. I'm running Firefox 3.0 on Windows (but I've tested this behavior with IE 6 also). The form gets submitted to a J2EE servlet. In my Java servlet the string length of the parameter is larger than 2000! I've noticed that this can easily be reproduced by adding carriage returns in the <textarea>. I've used Firebug to assert the length of the <textare> and it really is 2000 characters long. On the Java side though, the carriage returns get converted to UNIX style (\r\n, instead of \n), thus the string length differs! Am I missing something obvious here or what ? If not, how would you reliably (cross-platform / browser) make sure that the <textarea> is limited.

    Read the article

  • This is more a matlab/math brain teaser than a question

    - by gd047
    Here is the setup. No assumptions for the values I am using. n=2; % dimension of vectors x and (square) matrix P r=2; % number of x vectors and P matrices x1 = [3;5] x2 = [9;6] x = cat(2,x1,x2) P1 = [6,11;15,-1] P2 = [2,21;-2,3] P(:,1)=P1(:) P(:,2)=P2(:) modePr = [-.4;16] TransPr=[5.9,0.1;20.2,-4.8] pred_modePr = TransPr'*modePr MixPr = TransPr.*(modePr*(pred_modePr.^(-1))') x0 = x*MixPr Then it was time to apply the following formula to get myP , where µij is MixPr. I used this code to get it: myP=zeros(n*n,r); Ptables(:,:,1)=P1; Ptables(:,:,2)=P2; for j=1:r for i = 1:r; temp = MixPr(i,j)*(Ptables(:,:,i) + ... (x(:,i)-x0(:,j))*(x(:,i)-x0(:,j))'); myP(:,j)= myP(:,j) + temp(:); end end Some brilliant guy proposed this formula as another way to produce myP for j=1:r xk1=x(:,j); PP=xk1*xk1'; PP0(:,j)=PP(:); xk1=x0(:,j); PP=xk1*xk1'; PP1(:,j)=PP(:); end myP = (P+PP0)*MixPr-PP1 I tried to formulate the equality between the two methods and seems to be this one. To make things easier, I ignored from both methods the summation of matrix P. where the first part denotes the formula that I used, while the second comes from his code snippet. Do you think this is an obvious equality? If yes, ignore all the above and just try to explain why. I could only start from the LHS, and after some algebra I think I proved it equals to the RHS. However I can't see how did he (or she) think of it in the first place.

    Read the article

  • How do I reset the scale/zoom of a web app on an orientation change on the iPhone?

    - by Elisabeth
    I'm having the same problem that a couple of others have had with getting the correct behavior in a web app on an orientation change, and there doesn't seem to be an obvious solution - I've seen this question asked a couple of times on Stack Overflow and no one's yet been able to answer it. When I start the app in portrait mode, it works fine. Then I rotate into landscape and it's scaled up. To get it to scale correctly for the landscape mode I have to double tap on something twice, first to zoom all the way in (the normal double tap behavior) and again to zoom all the way out (again, the normal double tap behavior). When it zooms out, it zooms out to the correct NEW scale for landscape mode. Switching back to portrait seems to work more consistently; that is, it handles the zoom so that the scale is correct when the orientation changes back to portrait. I am trying to figure out if this is a bug? or if this is something that can be fixed with Javascript? With the viewport meta content, I am setting the initial-scale to 1.0 and I am NOT setting minimum or maximum scale (nor do I want to). I am setting the width to device-width. Any ideas? I know a lot of people would be grateful to have a solution as it seems to be a persistent problem. Thank you!

    Read the article

  • Bubble Breaker Game Solver better than greedy?

    - by Gregory
    For a mental exercise I decided to try and solve the bubble breaker game found on many cell phones as well as an example here:Bubble Break Game The random (N,M,C) board consists N rows x M columns with C colors The goal is to get the highest score by picking the sequence of bubble groups that ultimately leads to the highest score A bubble group is 2 or more bubbles of the same color that are adjacent to each other in either x or y direction. Diagonals do not count When a group is picked, the bubbles disappear, any holes are filled with bubbles from above first, ie shift down, then any holes are filled by shifting right A bubble group score = n * (n - 1) where n is the number of bubbles in the bubble group The first algorithm is a simple exhaustive recursive algorithm which explores going through the board row by row and column by column picking bubble groups. Once the bubble group is picked, we create a new board and try to solve that board, recursively descending down Some of the ideas I am using include normalized memoization. Once a board is solved we store the board and the best score in a memoization table. I create a prototype in python which shows a (2,15,5) board takes 8859 boards to solve in about 3 seconds. A (3,15,5) board takes 12,384,726 boards in 50 minutes on a server. The solver rate is ~3k-4k boards/sec and gradually decreases as the memoization search takes longer. Memoization table grows to 5,692,482 boards, and hits 6,713,566 times. What other approaches could yield high scores besides the exhaustive search? I don't seen any obvious way to divide and conquer. But trending towards larger and larger bubbles groups seems to be one approach Thanks to David Locke for posting the paper link which talks above a window solver which uses a constant-depth lookahead heuristic.

    Read the article

  • Question about MySQLdb, OS X 10.5, and authentication

    - by timpone
    I'm a noob at Python and have been having problems with MySQLdb and OS X Leopard 10.5. I have a php app that is doing db access just fine with pdo but also want to access with Python. When I use the same credentials with MySQLdb as php, I get the following error: File "build/bdist.macosx-10.5-i386/egg/MySQLdb/connections.py", line 188, in __init__ _mysql_exceptions.OperationalError: (1045, "Access denied for user 'arc_db'@'localhost' (using password: YES)") The authentication piece works fine on my ubuntu server (installed via apt-get) implying that it is something specific to my OS X MySQLdb install. Looking at some postings, I thought it would be my local build of MySQLdb which seems to be problematic with OS X. But I am able to import fine: Python 2.5.1 (r251:54863, Feb 6 2009, 19:02:12) [GCC 4.0.1 (Apple Inc. build 5465)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import MySQLdb >>> Also, wanting to create a positive, I am able to access and return results from a database tilted test_something (which presumably bypasses the MySQL's authtentication - not sure exactly how though). Trying to figure out a little more what is going on, I turn on logging for mysql and get the following (added my own comments): 100609 19:09:45 3 Connect Access denied for user 'arc_db'@'localhost' (using password: YES) //not worked 100609 19:10:02 4 Connect arc_db@localhost on arc_development //did work I'm not really sure what the 3 or 4 means but presumably a sucess or failue. So, I guess what would be the next step? Am I doing some obvious stupid python mistake (very likely)? Is there a better way for me to prove that this should / can be working? Is there any way to determine what MySQLdb is sending exactly in its authentication message to MySQL? thanks

    Read the article

  • php cli script hangs with no messages

    - by julio
    Hi-- I've written a PHP script that runs via SSH and nohup, meant to process records from a database and do stuff with them (eg. process some images, update some rows). It works fine with small loads, up to maybe 10k records. I have some larger datasets that process around 40k records (not a lot, I realize, but it adds up to a lot of work when each record requires the download and processing of up to 50 images). The larger datasets can take days to process. Sometimes I'll see in my debug logs memory errors, which are clear enough-- but sometimes the script just appears to "die" or go zombie on me. My tail of the debug log just stops, with no error messages, the tail of the nohup log ends with no error, and the process is still showing in a ps list, looking like this-- 26075 pts/0 S 745:01 /usr/bin/php ./import.php but no work is getting done. Can anyone give me some ideas on why a process would just quit? The obvious things (like a php script timeout and memory issues) are not a factor, as far as I can tell. Thanks for any tips PS-- this is hosted on a godaddy VDS (not my choice). I am sort of suspecting that godaddy has some kind of limits that might kick in on me despite what overrides I put in the code (such as set_time_limit(0);).

    Read the article

  • Relay WCF Service

    - by Matt Ruwe
    This is more of an architectural and security question than anything else. I'm trying to determine if a suggested architecture is necessary. Let me explain my configuration. We have a standard DMZ established that essentially has two firewalls. One that's external facing and the other that connects to the internal LAN. The following describes where each application tier is currently running. Outside the firewall: Silverlight Application In the DMZ: WCF Service (Business Logic & Data Access Layer) Inside the LAN: Database I'm receiving input that the architecture is not correct. Specifically, it has been suggested that because "a web server is easily hacked" that we should place a relay server inside the DMZ that communicates with another WCF service inside the LAN which will then communicate with the database. The external firewall is currently configured to only allow port 443 (https) to the WCF service. The internal firewall is configured to allow SQL connections from the WCF service in the DMZ. Ignoring the obvious performance implications, I don't see the security benefit either. I'm going to reserve my judgement of this suggestion to avoid polluting the answers with my bias. Any input is appreciated. Thanks, Matt

    Read the article

  • python / sqlite - database locked despite large timeouts

    - by Chris Phillips
    Hi, I'm sure I'm missing something pretty obvious, but I can't for the life of me stop my pysqlite scripts crashing out with a database is locked error. I have two scripts, one to load data into the database, and one to read data out, but both will frequently, and instantly, crash depending on what the other is doing with the database at any given time. I've got the timeout on both scripts set to 30 seconds: cx = sqlite.connect("database.sql", timeout=30.0) and think I can see some evidence of the timeouts in that i get what appears to be a timing stamp (e.g 0.12343827e-06 0.1 - and how do I stop that being printed?) dumped occasionally in the middle of my curses formatted output screen, but no delay that ever gets remotely near the 30 second timeout, but still one of the other keeps crashing again and again from this. I'm running RHEL5.4 on a 64 bit 4 cpu HS21 IBM blade, and have heard some mention about issues about multi-threading and am not sure if this might be relevant. Packages in use are sqlite-3.3.6-5 and python-sqlite-1.1.7-1.2.1, and upgrading to newer versions outside of RedHat's official provisions is not a great option for me. Possible, but not desirable due to the environment in general. I have had autocommit=1 on previously on both scripts, but have since disabled on both, and am now cx.commit()ing on the inserting script and not committing on the select script. Ultimately as I only ever have one script actually making any modifications, I don't really see why this locking should ever ever happen. I have noticed that this is significantly worse over time when the database has gotten larger. It was recently at 13mb with 3 equal sized tables, which was about 1 day's worth of data. creating a new file has significantly improved this, which seems understandable, but the timeout ultimately just doesn't seem to be being obeyed. Any pointers very much appreciated. Thanks Chris

    Read the article

  • Managing Cisco programatically; Telnet vs SNMP?

    - by MikeHerrera
    I was recently approached by a network-engineer, co-worker who would like to offload his minor network admin duties to a junior-level helpdesk tech. The specific location in need of management acts as an ISP for tenants on its single-site property, so there's a lot of small adjustments being made on a daily basis. I am thinking it would be helpful to write him a winform app to manage the 32 Cisco devices, on-site. I'd like to initially provide functionality which could modify access control lists, port VLAN assignments, and bandwidth limitations per VLAN... adding more to the list as its deemed valuable. My initial thought was to emulate a telnet session with the network device; utilizing my network-engineer's familiarity with the command-line / IOS interaction. Minimal time would be required to learn Cisco IOS conventions, myself. Though while searching for solutions, it appears that most people favor SNMP. That, or, their specific circumstances pushed them in the direction of SNMP. I wanted to know if I've overlooked an obvious benefit of SNMP. Should I be using SNMP? Why or why not?

    Read the article

  • How to convert an InputStream to a DataHandler?

    - by pcorey
    I'm working on a java web application in which files will be stored in a database. Originally we retrieved files already in the DB by simply calling getBytes on our result set: byte[] bytes = resultSet.getBytes(1); ... This byte array was then converted into a DataHandler using the obvious constructor: dataHandler=new DataHandler(bytes,"application/octet-stream"); This worked great until we started trying to store and retrieve larger files. Dumping the entire file contents into a byte array and then building a DataHandler out of that simply requires too much memory. My immediate idea is to retrieve a stream of the data in the database with getBinaryStream and somehow convert that InputStream into a DataHandler in a memory-efficient way. Unfortunately it doesn't seem like there's a direct way to convert an InputStream into a DataHandler. Another idea I've been playing with is reading chunks of data from the InputStream and writing them to the OutputStream of the DataHandler. But... I can't find a way to create an "empty" DataHandler that returns a non-null OutputStream when I call getOutputStream... Has anyone done this? I'd appreciate any help you can give me or leads in the right direction.

    Read the article

  • python protobufs - avoid the install step ?

    - by orion elenzil
    i'm writing a small python utility which will be consumed by moderately non-technical users and which needs to interface w/ some protobufs. ideally, i would like the only prerequisites to using this on a local machine to be: have python installed * have an SVN checkout of the repository * run a simple bash script to build the local proto .py definitions * run "python myutility" i'm running into trouble around importing descriptor_pb2.py, tho. i've seen Why do I see "cannot import name descriptor_pb2" error when using Google Protocol Buffers? , but would like to avoid adding the additional prerequisite of having run the proto SDK installer. i've modified the bash script to also generate descriptor_pb2.py in the local heirarchy, which works for the first level of imports from my other _pb2.py files, but it looks like descriptor_pb2.py itself tries to import descriptor_pb2 can't find it: $ python myutility.py Traceback (most recent call last): File "myutility.py", line 4, in <module> import protos.myProto_pb2 File "/myPath/protos/myProto_pb2.py", line 8, in <module> from google.protobuf import descriptor_pb2 File "/myPath/google/protobuf/descriptor_pb2.py", line 8, in <module> from google.protobuf import descriptor_pb2 ImportError: cannot import name descriptor_pb2 my local folder looks like: * myutility.py * google/ * protobuf/ * descriptor.py * descriptor_pb2.py * protos * myProto_ob2.py also, i'm a python n00b, so it's possible i'm overlooking something obvious. tia, orion

    Read the article

  • ASP.NET MVC Using Castle Windsor IoC

    - by Mad Halfling
    I have an app, modelled on the one from Apress Pro ASP.NET MVC that uses castle windsor's IoC to instantiate the controllers with their respective repositories, and this is working fine e.g. public class ItemController : Controller { private IItemsRepository itemsRepository; public ItemController(IItemsRepository windsorItemsRepository) { this.itemsRepository = windsorItemsRepository; } with using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Mvc; using Castle.Windsor; using Castle.Windsor.Configuration.Interpreters; using Castle.Core.Resource; using System.Reflection; using Castle.Core; namespace WebUI { public class WindsorControllerFactory : DefaultControllerFactory { WindsorContainer container; // The constructor: // 1. Sets up a new IoC container // 2. Registers all components specified in web.config // 3. Registers all controller types as components public WindsorControllerFactory() { // Instantiate a container, taking configuration from web.config container = new WindsorContainer(new XmlInterpreter(new ConfigResource("castle"))); // Also register all the controller types as transient var controllerTypes = from t in Assembly.GetExecutingAssembly().GetTypes() where typeof(IController).IsAssignableFrom(t) select t; foreach (Type t in controllerTypes) container.AddComponentWithLifestyle(t.FullName, t, LifestyleType.Transient); } // Constructs the controller instance needed to service each request protected override IController GetControllerInstance(Type controllerType) { return (IController)container.Resolve(controllerType); } } } controlling the controller creation. I sometimes need to create other repository instances within controllers, to pick up data from other places, can I do this using the CW IoC, if so then how? I have been playing around with the creation of new controller classes, as they should auto-register with my existing code (if I can get this working, I can register them properly later) but when I try to instantiate them there is an obvious objection as I can't supply a repos class for the constructor (I was pretty sure that was the wrong way to go about it anyway). Any help (especially examples) would be much appreciated. Cheers MH

    Read the article

  • What does this code from AuthKit do? (where are these functions and methods defined?)

    - by Beau Simensen
    I am trying to implement my own authentication method for AuthKit and am trying to figure out how some of the built-in methods work. In particular, I'm trying to figure out how to update the REMOTE_USER for environ correctly. This is how it is handled inside of authkit.authenticate.basic but it is pretty confusing. I cannot find anyplace where REMOTE_USER and AUTH_TYPE are defined. Is there something strange going on here and if so, what is it? def __call__(self, environ, start_response): environ['authkit.users'] = self.users result = self.authenticate(environ) if isinstance(result, str): AUTH_TYPE.update(environ, 'basic') REMOTE_USER.update(environ, result) return self.application(environ, start_response) There are actually a number of all uppercase things like this that I cannot find a definition for. For example, where does AUTHORIZATION come from below: def authenticate(self, environ): authorization = AUTHORIZATION(environ) if not authorization: return self.build_authentication() (authmeth, auth) = authorization.split(' ',1) if 'basic' != authmeth.lower(): return self.build_authentication() auth = auth.strip().decode('base64') username, password = auth.split(':',1) if self.authfunc(environ, username, password): return username return self.build_authentication() I feel like maybe I am missing some special syntax handling for the environ dict, but it is possible that there is something else really weird going on here that isn't immediately obvious to someone as new to Python as myself.

    Read the article

  • How to get image's coordinate on JPanel

    - by Jessy
    This question is related to my previous question http://stackoverflow.com/questions/2376027/how-to-generate-cartesian-coordinate-x-y-from-gridbaglayout I have successfully get the coordinate of each pictures, however when I checked the coordinate through (System.out.println) and the placement of the images on the screen, it seems to be wrong. e.g. if on the screen it was obvious that the x point of the first picture is on cell 2 which is on coordinate of 20, but the program shows x=1. Here is part of the code: public Grid (){ setPreferredSize(new Dimension(600,600)); .... setLayout(new GridBagLayout()); GridBagConstraints gc = new GridBagConstraints(); gc.weightx = 1d; gc.weighty = 1d; gc.insets = new Insets(0, 0, 0, 0);//top, left, bottom, and right gc.fill = GridBagConstraints.BOTH; JLabel[][] label = new JLabel[ROWS][COLS]; Random rand = new Random(); // fill the panel with labels for (int i=0;i<IMAGES;i++){ ImageIcon icon = createImageIcon("myPics.jpg"); int r, c; do{ //pick random cell which is empty r = (int)Math.floor(Math.random() * ROWS); c = (int)Math.floor(Math.random() * COLS); } while (label[r][c]!=null); //randomly scale the images int x = rand.nextInt(50)+30; int y = rand.nextInt(50)+30; Image image = icon.getImage().getScaledInstance(x,y, Image.SCALE_SMOOTH); icon.setImage(image); JLabel lbl = new JLabel(icon); // Instantiate GUI components gc.gridx = r; gc.gridy = c; add(lbl, gc); //add(component, constraintObj); label[r][c] = lbl; } I checked the coordinate through this code: Component[] components = getComponents(); for (Component component : components) { System.out.println(component.getBounds()); }

    Read the article

  • Variant datatype library for C

    - by Joey Adams
    Is there a decent open-source C library for storing and manipulating dynamically-typed variables (a.k.a. variants)? I'm primarily interested in atomic values (int8, int16, int32, uint, strings, blobs, etc.), while JSON-style arrays and objects as well as custom objects would also be nice. A major case where such a library would be useful is in working with SQL databases. The most obvious feature of such a library would be a single type for all supported values, e.g.: struct Variant { enum Type type; union { int8_t int8_; int16_t int16_; // ... }; }; Other features might include converting Variant objects to/from C structures (using a binding table), converting values to/from strings, and integration with an existing database library such as SQLite. Note: I do not believe this is question is a duplicate of http://stackoverflow.com/questions/649649/any-library-for-generic-datatypes-in-c , which refers to "queues, trees, maps, lists". What I'm talking about focuses more on making working with SQL databases roughly as smooth as working with them in interpreted languages.

    Read the article

  • Silverlight 4 race condition with DataGrid master details control

    - by Simon_Weaver
    Basically I want a DataGrid (master) and details (textbox), where DataGrid is disabled during edit of details (forcing people to save/cancel)... Here's what I have... I have a DataGrid which serves as my master data. <data:DataGrid IsEnabled="{Binding CanLoad,ElementName=dsReminders}" ItemsSource="{Binding Data, ElementName=dsReminders}" > Its data comes from a DomainDataSource: <riaControls:DomainDataSource Name="dsReminders" AutoLoad="True" ... I have a bound Textbox which is the 'details' (very simple right now). There are buttons (Save/Cancel) which should be enabled when user tries to edit the text. Unfortunately Silverlight doesn't support UpdateSourceTrigger=PropertyChanged so I have to raise an event: <TextBox Text="{Binding SelectedItem.AcknowledgedNote, Mode=TwoWay, UpdateSourceTrigger=Explicit, ElementName=gridReminders}" TextChanged="txtAcknowledgedNote_TextChanged"/> The event to handle this calls BindingExpression.UpdateSource to update the source immediately: private void txtAcknowledgedNote_TextChanged(object sender, TextChangedEventArgs e) { BindingExpression be = txtAcknowledgedNote.GetBindingExpression(TextBox.TextProperty); be.UpdateSource(); } IN other words - typing in the textbox causes CanLoad of the DomainDataSource to become False (because we're editing). This in turn disables the DataGrid (IsEnabled is bound to it) and enables 'Cancel' and 'Save' buttons. However I'm running up against a race condition if I move quickly through rows in the DataGrid (just clicking random rows). The TextChanged presumably is being called on the textbox and confusing the DomainDataSource which then thinks there's been a change. So how should I disable the DataGrid while editing without having the race condition? One obvious solution would be to use KeyDown events to trigger the call to UpdateSource but I always hate having to do that.

    Read the article

  • No test coverage files generated for Unit Test bundle in Xcode

    - by John Gallagher
    The Problem I've got a Cocoa project on the desktop and I'm using Xcode 3.2.1 on Snow Leopard 10.6.2. I want to generate code coverage files for my Unit Test Target in Xcode. What I've Tried As articles like this one suggest, I've adjusted the build settings to: “Generate Test Coverage Files” checked “Instrument Program Flow” checked “-lgcov” added to “Other Linker Flags” I've also set the Run Script section of the test target to have the following: # Run the unit tests in this test bundle. "${SYSTEM_DEVELOPER_DIR}/Tools/RunUnitTests" # Run gcov on the framework getting tested if [ "${CONFIGURATION}" = 'Coverage' ]; then FRAMEWORK_NAME=LapsusInterpretationEngine FRAMEWORK_OBJ_DIR=${OBJROOT}/${FRAMEWORK_NAME}.build/${CONFIGURATION}/EngineTests.build/Objects-normal/${NATIVE_ARCH} mkdir -p coverage pushd coverage find ${OBJROOT} -name *.gcda -exec gcov -o ${FRAMEWORK_OBJ_DIR} {} \; popd fi Since my Framework name is LapsusInterpretationEngine but my target is named EngineTests, I put this directly into the FRAMEWORK_OBJ_DIR but this didn't seem to help. I've tried cleaning before building. I've made sure all the above build settings apply to both the Unit Test Target and the Application Target. What I Get No .gcda or .gcno files anywhere in the build directory I'm using. I point CoverStory to the Objects-normal directory in my builds folder and it complains that there's nothing there for it to read. I must be doing something really obvious wrong. Anyone any ideas? I have tried the "EngineTests.build" directory being ${FRAMEWORK_NAME} and this gives the same results.

    Read the article

  • DataGridView in VB.net will not allow me to update

    - by Marc
    I have a datagridview with a dataTable as the dataSource. The user can add new rows to the datadridview, but I dont display the primary key column (for obvious reasons) and set it to .visible = false. When I need to update the information in the datagridview to the database, I use the sqlClient.SqlCommandBuilder to then update the underlying datasource (the dataTable mentioned above). Now, because the hidden column is the primary key, I loop through the datagridview and programically add the required primary key field to each new row that does not already contain a primary key (user added rows). This works great 95% of the time... The problem is when the user somehow gives focus at some point (any point) to that bottom row on the datagridview, below their added rows, that is used to add new rows. The update command gives me an error stating that it cannot insert null into the primary key field, even though when checking all the values in every row, it is definitely NOT null for any of them. I have tried to trap for row.isNewRow (as the field never shows null) and deleting that row, but I get an error stating I can not delete an uncommitted row. If the focus is never given to that empty row beneath the existing rows and user added rows, the update works fine. What is going on?!

    Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >