Search Results

Search found 13956 results on 559 pages for 'python memcached'.

Page 114/559 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• How to retrieve value from etc/sysconfig in Python

  - by stanleyxu2005

  Hi All, I have a config file FOO in /etc/sysconfig/. This Linux file is very similar to INI-File, but without a section declaration. In order to retrieve a value from this file, I used to write a shell script like: source /etc/sysconfig/FOO echo $MY_VALUE Now I want to do the same thing in python. I tried to use ConfigParser, but ConfigParser does not accept such an INI-File similar format, unless it has a section declaration. Is there any way to retrieve value from such a file?

  Read the article

• Python/Tkinter Audio Player

  - by Nicholas Quirk

  Hey everyone reading this, I've recently got into doing GUI development with Python. Tkinter seems like the easiest and most logical choice starting out. I did a little with wxPython but it was more sophisticated than what I needed. Anyway, I'm developing a media player. Right now it's a simple window with a button to load .wav files. The problem is I would like to implement a pause button now. But, when playing a audio file the GUI isn't accessible again (no buttons can be pushed) till the file is done playing. How can I make the GUI dynamic while an audio file is playing? I was thinking this maybe be because I'm using PyAudio, and their implementation doesn't allow this. Anyway, thanks for any advice before hand.

  Read the article

• Using Python tuples as vectors

  - by Etaoin

  I need to represent immutable vectors in Python ("vectors" as in linear algebra, not as in programming). The tuple seems like an obvious choice. The trouble is when I need to implement things like addition and scalar multiplication. If a and b are vectors, and c is a number, the best I can think of is this: tuple(map(lambda x,y: x + y, a, b)) # add vectors 'a' and 'b' tuple(map(lambda x: x * c, a)) # multiply vector 'a' by scalar 'c' which seems inelegant; there should be a clearer, simpler way to get this done -- not to mention avoiding the call to tuple, since map returns a list. Is there a better option?

  Read the article

• Python threads all executing on a single core

  - by Rob Lourens

  I have a Python program that spawns many threads, runs 4 at a time, and each performs an expensive operation. Pseudocode: for object in list: t = Thread(target=process, args=(object)) # if fewer than 4 threads are currently running, t.start(). Otherwise, add t to queue But when the program is run, Activity Monitor in OS X shows that 1 of the 4 logical cores is at 100% and the others are at nearly 0. Obviously I can't force the OS to do anything but I've never had to pay attention to performance in multi-threaded code like this before so I was wondering if I'm just missing or misunderstanding something. Thanks.

  Read the article

• Why is this logical expression in python False?

  - by W3ctor

  My question is, why are these expressions False? Python 2.6.4 (r264:75706, Dec 7 2009, 18:45:15) [GCC 4.4.1] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> num = raw_input("Choose a number: ") Choose a number: 5 >>> print num 5 >>> print ( num < 18 ) False >>> print ( num == 5 ) False Because if i try this: >>> print ( num > 0 ) True The expression works fine. Thank you for the help!

  Read the article

• Python Imaging: YCbCr problems

  - by daver

  Hi, I'm doing some image processing in Python using PIL, I need to extract the luminance layer from a series of images, and do some processing on that using numpy, then put the edited luminance layer back into the image and save it. The problem is, I can't seem to get any meaningful representation of my Image in a YCbCr format, or at least I don't understand what PIL is giving me in YCbCr. PIL documentation claims YCbCr format gives three channels, but when I grab the data out of the image using np.asarray, I get 4 channels. Ok, so I figure one must be alpha. Here is some code I'm using to test this process: import Image as im import numpy as np pengIm = im.open("Data\\Test\\Penguins.bmp") yIm = pengIm.convert("YCbCr") testIm = np.asarray(yIm) grey = testIm[:,:,0] grey = grey.astype('uint8') greyIm = im.fromarray(grey, "L") greyIm.save("Data\\Test\\grey.bmp") I'm expecting a greyscale version of my image, but what I get is this jumbled up mess: http://i.imgur.com/zlhIh.png Can anybody explain to me where I'm going wrong? The same code in matlab works exactly as I expect.

  Read the article

• Binary search of unaccesible data field in ldap from python

  - by EricR

  I'm interested in reproducing a particular python script. I have a friend who was accessing an ldap database, without authentication. There was a particular field of interest, we'll call it nin (an integer) for reference, and this field wasn't accessible without proper authentication. However, my friend managed to access this field through some sort of binary search (rather than just looping through integers) on the data; he would check the first digit, check if it was greater or less than the starting value, he would augment that until it returned a true value indicating existence, adding digits and continuing checking until he found the exact value of the integer nin. Any ideas on how he went about this? I've access to a similarly set up database.

  Read the article

• Unable to access LinkedIn conections using python rauth library

  - by srinath sastry

  I was trying out this example at https://github.com/litl/rauth/blob/master/examples/linkedin-web.py I get a 403, Access to connections denied error and it returns KeyError: '_total'. r_network option is present. Has anyone faced this issue? Also if you look at http://docs.python-requests.org/en/latest/user/quickstart/#oauth-authentication, the 'requests' library is initializing resource_owner_key, resource_owner_secret apart from the application keys. Not sure how these are getting passed from the 'rauth' library, Was wondering if that was causing this 403 error.

  Read the article

• Python: avoiding fraction simplification

  - by Anthony Labarre

  Hi all, I'm working on a music app' in Python and would like to use the fractions module to handle time signatures amongst other things. My problem is that fractions get simplified, i.e.: >>> from fractions import Fraction >>> x = Fraction(4, 4) >>> x Fraction(1, 1) However, it is important from a musical point of view that 4/4 stays 4/4 even though it equals 1. Is there any built-in way to avoid that behaviour? Thanks!

  Read the article

• Python - Things I shouldn't be doing?

  - by cornjuliox

  I've got a few questions about best practices in Python. Not too long ago I would do something like this with my code: ... junk_block = "".join(open("foo.txt","rb").read().split()) ... I don't do this anymore because I can see that it makes code harder to read, but would the code run slower if I split the statements up like so: f_obj = open("foo.txt", "rb") f_data = f_obj.read() f_data_list = f_data.split() junk_block = "".join(f_data_list) I also noticed that there's nothing keeping you from doing an 'import' within a function block, is there any reason why I should do that?

  Read the article

• List of IP addresses/hostnames from local network in Python

  - by joshhunt

  How can I get a list of the IP addresses or host names from a local network easily in Python? It would be best if it was multi-platform, but it needs to work on Mac OS X first, then others follow. Edit: By local I mean all active addresses within a local network, such as 192.168.xxx.xxx. So, if the IP address of my computer (within the local network) is 192.168.1.1, and I have three other connected computers, I would want it to return the IP addresses 192.168.1.2, 192.168.1.3, 192.168.1.4, and possibly their hostnames.

  Read the article

• Python: Trying to get index of an intersection

  - by user1620716

  I have the following line of code: for i in [i for i,x in enumerate(catdate) if x == set(NNSRCfile['datetimenew']).intersection(catdate)]: print i I am trying to find the index of the intersection for the two components above. Both are lengthy lists that have several commonalities. The intersection part works perfectly; however, the for loop seems to output nothing. (ie: there is nothing that is printed). Python outputs no error, and when I run the code in IPython, I notice that i is equivalent to to the very last element in the list "catdate", instead of listing the indices of "catdate" that are equivalent to the intersection values. Any help is greatly appreciated!

  Read the article

• Reading a triangle of numbers into a 2d array of ints in Python

  - by Gabriel Silk

  I want to read a triangle of integer values from a file into a 2D array of ints using Python. The numbers would look like this: 75 95 64 17 47 82 18 35 87 10 20 04 82 47 65 ... The code I have so far is as follows: f = open('problem18.input', 'r') arr = [] for i in range(0, 15): arr.append([]) str = f.readline() a = str.split(' ') for tok in a: arr[i].append(int(tok[:2])) print arr I have a feeling this could be done in a tighter, more Pythonesque way. How would you do it?

  Read the article

• syntax error in python:

  - by pecker

  Hello, I'm learning python. It gives syntax error in this script. I'm unable to figure out. import exceptions class FOUND(Exception): pass x = [1,2,3,4,56,73,29,35,12,32,63,12,76,75,89] while True: test = int(raw_input('Enter integer to be checked in list:')) try: count = -1 for y in x: count += 1 if y == test: raise FOUND except ValueError,e: print "Not a valid integer (%d)"%(e) except FOUND: print "Found (%d) at (%d)"%(test,count) else: print "Not found ,Appending (%d) to list at location (%d)"%(test,count+1) x.append(test) finally: print "The List:" print x print " " Invalid syntax & it highlights comma in this line: 'except ValueError,e:'

  Read the article

• Python code that needs some overview

  - by fabio

  Hi guys, im currently learning python (in the very begining), so I still have some doubts about good code manners and how should I proceed with it. Today I created this code that should random trought 01 to 60 (but is running from 01 to 69) import random dez = ['0', '1', '2', '3', '4', '5', '6'] uni = ['0', '1', '2', '3', '4', '5', '6', '7', '8', '9'] sort = [] while len(sort) <= 5: random.shuffle(dez) random.shuffle(uni) w = random.choice(dez) z = random.choice(uni) chosen = str(w) + str(z) if chosen != "00" and chosen not in sort: sort.append(chosen) print chosen I'm also in doubt how to make the code stop at "60".

  Read the article

• Load JSON in Python as header character set

  - by mridang

  Hi everyone, I've always found character sets and encodings complicated to understand and here I'm faced with another problem. My apologies for any inaccuracies. I'll do my best. I'm requesting data from a server which returns JSON. In the HTTP headers it also returns the character set like so: Content-Type: text/html; charset=UTF-8 I'm using the JSON library in Python to load the JSON using the json.loads method. When I pass it the returned JSON, it gives me a dictionary in Unicode. I've Googled around and I know that JSON should return Unicode as JavaScript strings are Unicode objects. How can I load the JSON as UTF-8? I would like to use the same encoding as specified in the response header. I've read this post but it didn't help. Thank you.

  Read the article

• Problem about python import with error

  - by xiao

  Hello, I have write a small python module with one class and two functions. The skeleton of the module is as following: #file name: test_module.py class TestClass: @classmethod def method1(cls, param1): #to do something pass def __init__(self, param1): #to do something ... def fun1(*params): #to do something ... def fun2(*params): #to do something ... Another py file is a small script which imports function and class from the module, as following: import sys from test_module import TestClass, fun1, fun2 def main(sys_argv): li = range(5) inst1 = TestClass(li) fun1(inst1) fun2(inst1) return if __name__ == "__main__": main(sys.argv) But when I execute the script, it is broken with following message: ./script.py: line 4: syntax error near unexpected token `(' ./script.py: line 4: `def main(sys_argv):' I am not sure what the problem is. Is it a problem with import? But when I try to import the module in ipython, everything is just ok.

  Read the article

• Python: Elegant way to check if at least one regex in list matches a string

  - by houbysoft

  Hi. I have a list of regexes in python, and a string. Is there an elegant way to check if the at least one regex in the list matches the string? By elegant, I mean something better than simply looping through all of the regexes and checking them against the string and stopping if a match is found. Basically, I had this code: list = ['something','another','thing','hello'] string = 'hi' if string in list: pass # do something else: pass # do something else Now I would like to have some regular expressions in the list, rather than just strings, and I am wondering if there is an elegant solution to check for a match to replace if string in list:. Thanks in advance.

  Read the article

• python: list modules within the package

  - by ak

  I have a package with a few modules, each module has a class (or a few classes) defined within it. I need to get the list of all modules within the package. Is there an API for this in python? Here is the file structure: \pkg\ \pkg\__init__.py \pkg\module1.py -> defines Class1 \pkg\module2.py -> defines Class2 \pkg\module3.py -> defines Class3 and Class31 from within module1 I need to get the list of modules within pkg, and then import all the classes defined in these modules Thanks ak

  Read the article

• How to use OpenCV in Python?

  - by Roman

  I have just installed OpenCV on my Windows 7 machine. As a result I get a new directory: C:\OpenCV2.2\Python2.7\Lib\site-packages In this directory I have two files: cv.lib and cv.pyd. Then I try to use the opencv from Python. I do the following: import sys sys.path.append('C:\OpenCV2.2\Python2.7\Lib\site-packages') import cv As a result I get the following error message: File "<stdin>", line 1, in <module> ImportError: DLL load failed: The specified module could not be found. What am I doing wrong? ADDED As it was recommended here, I have copied content of C:\OpenCV2.0\Python2.6\Lib\site-packages to the C:\Python26\Lib\site-packages. It did not help.

  Read the article

• Automatic logout in python web app

  - by Ali

  I have a web application in python wherein the user submits their email and password. These values are compared to values stored in a mysql database. If successful, the script generates a session id, stores it next to the email in the database and sets a cookie with the session id, with allows the user to interact with other parts of the sight. When the user clicks logout, the script erases the session id from the database and deletes the cookie. The cookie expires after 5 hours. My concern is that if the user doesnt log out, and the cookie expires, the script will force him to login, but if he has copied the session id from before, it can still be validated. How do i automatically delete the session id from the mysql database after 5 hours?

  Read the article

• Parsing files with python

  - by iHeartDucks

  My input file is going to be something like this key "value" key "value" ... the above lines repeat What I do is read the file contents, populate an object with the data and return it. There are only a set number of keys that can be present in the file. Since I am a beginner in python, I feel that my code to read the file is not that good My code is something like this ObjInstance = CustomClass() fields = ['key1', 'key2', 'key3'] for field in fields: for line in f: if line.find(field) >= 0: if pgn_field == 'key1': objInstance.DataOne = get_value_using_re(line) elif pgn_field == 'key2': objInstance.DataTwo = get_value_using_re(line) return objInstance; The function "get_value_using_re" is very simple, it looks for a string in between the double quotes and returns it. I fear that I will have multiple if elif statements and I don't know if this is the right way or not. Am I doing the right thing here?

  Read the article

• A Python IDE with Debugging and iPython Integration?

  - by skibum1981

  Does anyone know of a python IDE that has iPython as the interpreter? Using the standard interpreter just drives me nuts, as I've just grown to love using iPython and all the features it provides. To be honest, I'd rather code with a simple text editor + ipython than an IDE, but I love being able to set breakpoints with a click of a mouse, etc., so I'd like to combine both. Sorry if there's something out there and this is common knowledge. Any information/tips you can provide is GREATLY appreciated. Thanks!

  Read the article

• sampling integers uniformly efficiently in python using numpy/scipy

  - by user248237

  I have a problem where depending on the result of a random coin flip, I have to sample a random starting position from a string. If the sampling of this random position is uniform over the string, I thought of two approaches to do it: one using multinomial from numpy.random, the other using the simple randint function of Python standard lib. I tested this as follows: from numpy import * from numpy.random import multinomial from random import randint import time def use_multinomial(length, num_points): probs = ones(length)/float(length) for n in range(num_points): result = multinomial(1, probs) def use_rand(length, num_points): for n in range(num_points): rand(1, length) def main(): length = 1700 num_points = 50000 t1 = time.time() use_multinomial(length, num_points) t2 = time.time() print "Multinomial took: %s seconds" %(t2 - t1) t1 = time.time() use_rand(length, num_points) t2 = time.time() print "Rand took: %s seconds" %(t2 - t1) if __name__ == '__main__': main() The output is: Multinomial took: 6.58072400093 seconds Rand took: 2.35189199448 seconds it seems like randint is faster, but it still seems very slow to me. Is there a vectorized way to get this to be much faster, using numpy or scipy? thanks.

  Read the article

• Complicated parsing in python

  - by Quazi Farhan

  I have a weird parsing problem with python. I need to parse the following text. Here I need only the section between(not including) "pre" tag and column of numbers (starting with 205 4 164). I have several pages in this format. <html> <pre> A Short Study of Notation Efficiency CACM August, 1960 Smith Jr., H. J. CA600802 JB March 20, 1978 9:02 PM 205 4 164 210 4 164 214 4 164 642 4 164 1 5 164 </pre> </html>

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >