Search Results

Search found 8783 results on 352 pages for 'laptop disaster'.

Page 115/352 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• Dell Vostro 2420 upgrade to 12.04.1 no wifi

  - by Kane

  I have installed 12.04 on a dell vostro 2420 (previously 11.10) and wifi is gone now but wired network remains. I've reviewed the other questions and tried some stuff but no luck yet. The following is the process so far so hopefully someone can help: After installing 12.04 using the additional drivers utility did not bring up any proprietary drivers and using synaptic on installation then reinstallation of bcmwl-kernel-source and b43-fwcutter does not help bring up any drivers either (tried rebooting after as well) I have made sure in the bios that the wlan is turned on, and it appears the laptop does not have a wireless hardware switch, only the keyboard function shortcut which turns bluetooth on and off on the taskbar but there is no lightup of the wireless function on the laptop itself. Dell does not appear to have any drivers for ubuntu and google does not appear to be much help :( Thanks in advance!

  Read the article

• Atheros AR928X wireless connection makes neighbourhood machine drop off line

  - by funicorn

  I have an Acer laptop with Atheros AR928X wireless card installed, supported by ath9k driver in the linux kernel. There are other 5 computers sharing wireless connection via a TPLink 150Mbit/s wireless router. At first I found the network is a little bit slower than it's in Windows7, which I accepted as it should be. However a very strange thing is, each time I connected to the router and downloaded stuff for a while, one of the computers running Windows7 in my local network dropped off from the router. And if I run my laptop under Windows7, everything is fine. What's even stranger is although the network becomes slower, only the certain computer drops and totally freezes in connection with the router. I'm not willing to conclude it's due to the unhealthy connection from my laptop to the router, however we have confirmed this for more than one times and there is no problem with the network when I'm running WIndows7. I'm extremely confused about what's going on. As a Linux user running Ubuntu over 5 years, I am awared that wireless driver in Linux is badly notorious of lack of stability and slow speed. But is it so bad that the unhealthy wireless connection can do damage to another computer in the same local network? I do see a lot of "Tx excessive retries" in iwconfig output. But how exactly does this happen ? Thanks for your help. I guess I have to use this answer box to show the outputs $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=47/70 Signal level=-63 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:2 Invalid misc:23 Missed beacon:0 To show what's wrong with the wireless connection, I ran iwconfig again within 3 minutes, during which time I hardly did anything and the network was not much busy than being nearly idle $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:9 Invalid misc:28 Missed beacon:0 You can see Tx excessive retires and Invalid misc increase very quickly. $ sudo iwlist wlan0 modu wlan0 unknown modulation information. $ sudo iwlist wlan0 channel wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Current Frequency:2.427 GHz (Channel 4)

  Read the article

• My computer will no longer suspend or shut off when I close the lid

  - by dave

  This is somewhat annoying. I have an old laptop and the screen on it is shot, so now I have an old monitor hooked up and it works fine. Before the upgrade I had it set so that when i closed the lid on the laptop everything would shutdown or suspend, when I lift the lid, everything would come back. Now, however, when i close the lid nothing happens, when i open the lid the screen flashes black and comes back. I have it set so that it should suspend when i close the lid. It's confusing...

  Read the article

• Brightness is reset to Maximum on every Restart

  - by Bhargav

  The brightness of my laptop is reset to Max on every restart. I tried the solution provided at this website but had no luck. http://ubuntuguide.net/how-to-save-screen-brightness-settings-in-ubuntu-12-04-laptop/ This command cat /sys/class/backlight/acpi_video0/max_brightness Returns cat: /sys/class/backlight/acpi_video0/max_brightness: No such file or directory Then I go on to find that I don't have any folder named acpi_video0 but a folder called intel_backlight Every time I increase or decrease the brightness using the Brightness Control Keys the "brightness" and the "actual_brightness" values get updated. Is there any method I could follow to set the brightness to a fixed value on everyboot and vary it as and when I need it using the Brightness Control Keys.

  Read the article

• Help with Kodak esp 3250 printer driver on Lubuntu 12.1 SOLVED!

  - by user108608

  First my system: pentium 4 -don't remember the speed-, 1g ram, dual boot to separate physical drives, Fdos and Lubuntu 12.1 second my lan: I have four computers operating for the same printer. 1. Intel quad core i5, 4g ram, running Windoze 7 64 bit, printer connected and shared from here. Kodak ESP 3250 2. Gateway 17" laptop running Windoze 7 32bit 3. Asus tablet (small laptop) running Lumbutu 12.1 4. My dual boot system running Fdos and Lubuntu 12.1 The problem: I downloaded c2esp_25c-1_i386.deb, tried to install it using DEBI Package Installer, it loads the files, looks for cups driver and ends with an error: "Dependancy is not satisfiable: libcupsdriver1 (=1.4.0)" What do I do now? Is there some place that I can get the correct cups driver? further information: The Asus tablet was running Ubuntu 12.1 (very slowly and with a few crashes) and could print from the lan printer with no problems. Is there something in Ubuntu that can be loaded into Lubuntu? noobee user hoping for answers, Paul

  Read the article

• Why I can't see my desktop icons in ubuntu 13.04?

  - by Edgar

  I just installed Ubuntu 13.04 in my laptop Aspire-M3-5871TG, and I can't see anything (neither icons, ...). Only is visible the desktop background but I can open and work with the terminal. Maybe the problem is related with Nvidia Geforce GT 640M vs Unity. I've tried several commands: dconf reset -f /org/compiz/ unity --reset-icons &disown and unity --replace & but nothing happens. I've tried other commands as well: sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current and nothing happens. I've also tried to install tweak but is it not possible to find it. Thus, I can't do nothing ... Definetely my laptop is not compatible with Ubuntu 13.04?

  Read the article

• Music server + Banshee

  - by slosd

  I'm currently trying to figure out some kind of set-up for my music collection. The music collection is located on my "main PC" and I'm using Banshee to play/manage the music. Since I'm often at a different location where I use my laptop I have a FTP server running on my main PC, use curlftpfs to mount the music in /home/username/Music and sync the Banshee DB/configuration via Dropbox. The problem at the moment is that Banshee skips songs very often when the connection is a little slower. I've been looking at some servers like Ampache but they are not really an option since they don't let me use Banshee (which means I have no ability to change metadata or rate songs). Syncing the whole collection to my laptop isn't an option either because of its size. It would be great if you had some ideas how to make my current set-up more reliable or maybe know an alternative.

  Read the article

• magic trackpad - Ubuntu

  - by UbuntuGuy

  I've been using a mac in my job for a while now. The only feature i like about it above my ubuntu (on an hp) is the trackpad. I love doing the strokes to move between different files. It really makes things quicker. Is it possible to imitate this feature on my ubuntu laptop. (like maybe there might be something that utilizes my mouse pad on the laptop, as well as the scroller) If that is impossible or doesn't exist then can i set up a magic trackpad to ubuntu on my hp.

  Read the article

• Faulty memtest result

  - by dhojgaard

  I've been a bit suspicious about my RAM lately. They seem not work like i expect them to. For instance i run a lot of Virtual Test Environments in VMware Workstation and lately Ubuntu starts to lag just running 4 virtual machines each dedicated 512 MB. BTW im having 6GB memory on my laptop. This did not use to be a problem for me on my last laptop that even had a lot lower CPU resources. So i was led to try a memtest after reading some websites about RAM testing. So i did a memtest overnight but when i woke up this morning i was just looping and i could not Exit or do anything. It was just looping the number of errors besides test 7 which you can see in the lower right part of the screenshot. Can anyone interpret this screenshot for me? Do i have a faulty set of RAMs?

  Read the article

• adjust resolution on Ubuntu Server 10.04?

  - by Mike Grace

  Installed Ubuntu Server 10.04 on an old laptop and I noticed that the system is trying to show the CLI below my screen. This means that if I run a script or a program with a bunch of output, once it is done, I have to press return several times to bring the output to the point where I can actually see it on the screen. I also have to clear the screen to be able to see what I am typing at the current command prompt. The laptop is an EliteGroup 536S with a native screen resolution of 1024 x 768 How can I adjust the resolution for Ubuntu Server 10.04? What file do I need to edit if editing a file is the solution? I've seen posts on how to change the resolution on the desktop version of Ubuntu but not the server version.

  Read the article

• How to switch off wifi on startup or from the console

  - by mit

  I have installed ubuntu 10.04 on a laptop. Wifi is switched on by default on startup. I can disable it rightclicking the network manager icon in the gnome bar. How can I set it to have wifi switched off as default? Alternatively, how can I switch off wifi on the console? I tried already the rfkill command but it does not list any devices and it does not switch off wifi, I tried different parameters. This is a standard install of the Ubuntu 10.04 i386 Desktop Live CD on an IBM T40 Laptop. EDIT A: This is the output of some rfkill commands on my system, and it does not affect the wifi of the laptop: $ rfkill --help Usage: rfkill [options] command Options: --version show version (0.4) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm $ rfkill list $ rfkill list wifi $ rfkill list all $ rfkill list wlan $ sudo rfkill list all $ sudo rfkill block all $ sudo rfkill block wlan $ sudo rfkill block wifi $ EDIT B: Now I found out that sudo ifconfig eth1 down turns it off. And I can turn it on through the gnome network applet again. But the applet does not reflect the change from the commandline, it stills believes wifi is switched on. I have to switch it off and on again on the applet to switch it on again, when I switched it off from the console. Is there a better way? This is what the syslog looks like when I switch wireless off and on again from the network manager: NetworkManager: <info> (eth1): device state change: 3 -> 2 (reason 0) NetworkManager: <info> (eth1): deactivating device (reason: 0). NetworkManager: <info> Policy set '24' (eth0) as default for routing and DNS. NetworkManager: <info> (eth1): taking down device. avahi-daemon[660]: Withdrawing address record for fe80::202:8aff:feba:d798 on eth1. kernel: [ 971.472116] airo(eth1): cmd:3 status:7f03 rsp0:0 rsp1:0 rsp2:0 NetworkManager: <info> (eth1): bringing up device. NetworkManager: <info> (eth1): supplicant interface state: starting -> ready NetworkManager: <info> (eth1): device state change: 2 -> 3 (reason 42) avahi-daemon[660]: Registering new address record for fe80::202:8aff:feba:d798 on eth1.*. kernel: [ 965.512048] eth1: no IPv6 routers present

  Read the article

• After upgrading to Ubuntu 12.04, my broadcom wireless sta driver is not working

  - by Nuwan Aluwihare

  I upgraded my HP DV5-1000US Laptop to Ubuntu 12.04. But I cannot get it connected to the Wireless. I went through the settings, Hardware, Additional Drivers and it says that "No proprietary drivers are in use on this system". Also it says "Broadcom STA Wireless Driver" is not activated. I tried to activate it after got my laptop connected to the net through a wired connection, but it says "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log"

  Read the article

• No 'Hardware' tab in audio and no profiles

  - by Gene

  If I run the 12.x ubuntu (latest May 2012) from the CD, I get full audio settings, and sound playing in speaker. Profiles let me change analog to digital in/out. Once I run install from the same CD onto the laptop HD, once it boots the first time, after selecting audio settings, there is no 'Hardware' tab and no way to change profiles. Worst part is the audio device is set to SPDIF so nothing comes out of the speakers. Very off how booting off the CD I can get analog audio, and installing to HD and booting seems to limit the profile to something useless. Laptop is a 5 year old Dell D820 with Nvidea 128meg video on a 1920x1200 screen and T7200 CPU. I suspect if I could get the damn HARDWARE tab back in audio settings, I could just select the proper Analog profile - just as is the case if running from a boot CD. Searched the web, no similar problems found... any help appreciated!

  Read the article

• How to close lid without triggering standby one time only

  - by Ian Mackinnon

  Related: How can I tell Ubuntu to do nothing when I close my laptop lid? I have my laptop set to activate standby when I close the lid. I want to keep this as the default for both battery and AC power. But occasionally I want to close the lid without triggering standby (eg. while just listening to audio). Is there someway I can tell Ubuntu, "I'm going to close the lid now. Don't stand by this time", without altering the defaults (because I almost always forget to change them back).

  Read the article

• Ubuntu 12.04 LTS x86_64 sound artifacts when scrolling with firefox

  - by Nh3xus

  I've been using Ubuntu since the 10.04 LTS version and i have a sound problem that still remain in my fresh install of the 12.04 LTS AMD64 version. This install has been performed by formatting the / partition and my documents were kept safe in the separated /home partition. The problem : When i listen to a audio or video source while browsing the web with Firefox, I have some sound artifacts when i'm scrolling and stops when i'm not doing it. This happens when i'm doing X11 related actions too, such as switching between virtuals desktops. Computer configuration of my laptop : - Ubuntu 12.04 LTS AMD64 - Plantronic USB Headphones - Intel HDA Audio sound card (laptop) with SigmaTel STAC9200 chip - AlsaMixer v 1.0.25 - Nvidia GeForce 7950 GTX with Nvidia 295.40 driver Any advices are welcome here :) Note : This is my first post on AskUbuntu.

  Read the article

• mount old ATA disk to USB adapter

  - by 213441265152351

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic USB-IDE, an ATA adapter to USB 1.0 similar to the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. Any ideas?

  Read the article

• Which version of ubuntu is compatible with ACER Aspire 5732Z?

  - by Mehdi Bateni

  I have an ACER Aspire 5732Z Laptop, and 6 days ago I have installed Ubuntu 11.10 on my laptop, But I found black screen in login. I have tried a lot of ways to solve this problem, but there is no way. So can you tell me which version is compatible with this ACER Aspire (5732Z)? Detail: Intel-Pentium-processor T4400 (2.2 GHz, 800 MHz FSB), Intel-GMA 4500M, 15.6" HD LCD, 2GB Memory, 320 GB HDD, Acer Nplify(TM) 802.11b/g/n. Thank You. .. And finally, I found that Linux Mint is best for my ACER-ASPIRE5732Z. It is also compatible with Ubuntu codes, because as I know it is base on Ubuntu.

  Read the article

• Ubuntu 12.04, can't find my home wifi network

  - by Anton

  I've tried several solutions I found on the web, but didn't manage to solve a problem. Since today my laptop won't find my WiFi network, but neighbours' networks are suggested. Another laptop with U12.04 does find one. What do I do? I've Dell Latitude-E4310, 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f2c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac also NetworkManager Tool State: connected (global) - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: wl State: disconnected Default: no HW Address: 1C:65:9D:7A:45:5C Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Should I provide anything else? Many thanks in advance.

  Read the article

• Infrared usb adapter not hot pluggable?

  - by A. Goossens

  For transferring exercise files from my Polar heart rate monitor i use the software Protrainer 5 with an external infrared usb adapter. Using Wine to run Protrainer 5 and some adjustments mentioned here (using irda-utils) i managed to make it work. Well, sort of: every time i want to transfer exercise files and the adapter is not plugged in i have to reboot my laptop with the usb adapter plugged in to make it work. Since i have a laptop it unfortunately is no option to just always leave the adapter in. It seems to me that the usb adapter isn't hot pluggable (which seems odd for a usb device) or there must be another problem. Polar WebLink (other software to transfer exercise files) experiences the same issue. Can anyone help me to fix this problem? Infrared usb adapter: Polar IRDA USB adapter OS: Ubuntu 12.10 (64-bit) Hardware: Lenovo Thinkpad T500

  Read the article

• nVidia GeForce Go 7600? can it ever run unity?

  - by Khaled Musleh

  my laptop Toshiba Qosmio G30 has nVidia GeForce Go 7600 card and it suppose to support 3D . i run unity 2d now . I run 12.04 and the graphic driver is--VESA: G73 Board - toshg73m-- by UBUNTU. when i run /usr/lib/nux/unity_support_test -p then i get this list Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no the card is not blacklisted but a similar one with GT is! Do you think that there is a chance the laptop can run the unity 3d? and may be i could change the resolution of the screen to a higher one too! I tried all the nvidia drivers provided but none works (except 96 in ubuntu 12.04 ). i get a black screen or terminal screen. best wishes to all

  Read the article

• WUXGA revisited

  - by John Paul Cook

  I previously blogged about my search for a 17” 1920x1200 laptop. The only one I could find was a 17” MacBook Pro, which has been an excellent machine for running Windows and SQL Server. It is no longer made. Apple has a few refurbished ones available. Just be sure to get a matte display if you buy one. If you want WUXGA resolution or better in a laptop, your only off the shelf option is now the 15” MacBook Pro with the Retina display, which is 2880x1800. This exceeds the resolution of my 30” 2560x1600...(read more)

  Read the article

• Wifi won't work without ethernet (Ubuntu 12.04)

  - by alok

  I have a strange problem. I am running Ubuntu 12.04 on a Dell Studio 1558 laptop. I'm usually unable to access Wifi (I have a BCM43224 wireless card with the STA proprietary driver installed.) So I have to unplug the ethernet cable from my Wifi router and stick it into my laptop's ethernet port to access the Internet. But when I stick the cable back into the Wifi router and try connecting to Wifi, Wifi inexplicably starts working. How can I get Wifi to work all the time without having to 'jumpstart' it with an ethernet connection?

  Read the article

• How can I figure out why Suspend sometimes fails?

  - by Isaac

  Something is causing suspend crash occasionally. When it does crash, the system freezes with a black screen and stays on, not suspending. This makes me have to hold the power button until the system shuts down. One setting difference I have from most people is, I don't use the option that lets you suspend when the laptop lid is closed. So opening and closing the laptop lid has no actions. I like to press suspend manually. Could this preference change be the cause? How can I start looking for what's causing the crash, since the crash doesn't display errors?

  Read the article

• Extremely slow transfer speed ubuntu -> Windows

  - by Hailwood

  I have two laptops, One is running Ubuntu 12.04 (EXT4) the other is running Windows 7 (NTFS). I am copying over 40gb of data (one file) from the Ubuntu laptop to the Windows Laptop. (Browse the shared folder on Ubuntu using Windows copy/paste) But I am getting transfer speeds topping out at ~700kb/s Surely this is not right. I am transferring via wifi on both laptops. My download speeds can reach 7-8mb/s on both laptops, so I know it is not the wifi cards or the router topping out. wlan0 Link encap:Ethernet HWaddr 84:4b:f5:db:b4:85 inet addr:192.168.1.66 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::864b:f5ff:fedb:b485/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11941185 errors:0 dropped:0 overruns:0 frame:0 TX packets:11306693 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10087111370 (10.0 GB) TX bytes:7843524888 (7.8 GB)

  Read the article

• Giant battery consumption with dual graphics solution (only i-gpu working)

  - by Noel

  I use a Laptop with Intel Core i7 SandyBridge and integrated Intel HD3000 graphics as well as a Nvidia Geforce GTS 555M. So far, I got the impression my Laptop was running with the Nvidia graphics adapter only because the fan was always running on highest speed (and loudest noise) and it was getting very hot even when doing nothing. Also the battery is empty after ~40-50 minutes (while having ~4-5 hours with Intel graphics in Win7). Since this can't be healthy I wanted to switch to the integrated graphics instead. I was fairly surprised when the System Information showed me that the as graphics adapter I use "Intel M". Why is my battery empty so fast with Ubuntu? Without using the NVIDIA graphics adapter? Summary: I DONT WANT to use the Nvidia graphics adapter (OPTIMUS), I just want the Intel solution. As I have understood, the Intel solution is running already, emptying my battery 10x as fast as Win7. What is wrong? Any ideas?

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >