Search Results

Search found 4572 results on 183 pages for 'dual monitors'.

Page 116/183 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• ubuntu 11.10 on MacBookPro 7,1 can only see one cpu

  - by gozzilli

  On a MacBookPro 7,1 running ubuntu 11.10, System monitor only sees 1 core (instead of 2). cat /proc/cpuinfo | grep 'cpu cores' also gives: cpu cores : 1 I followed this guide and added acpi_apic_instance=2 to the line with GRUB_CMDLINE_LINUX_DEFAULT, but that doesn't seem to change the situation. What can I do? I'm using rEFIt, installed under MacOS, and running in dual boot with MacOS. After the rEFIT menu, I'm still presented with the GRUB menu (I'm assuming that's normal). I saw similar posts on this matter, but could not fix my problem with what they suggested. Any help appreciated. Thanks!

  Read the article

• System checks for disk drive error every time it boots

  - by Starx

  When my disk space for the ubuntu installation partition was getting low, from a live cd, I used gparted to increase its volume capacity, but deleting another partition and merging it to the ubuntu partition. Since then onwards, I am receiving disk checking for errors at boot screen for my partitions, always. What seem to be causing this and how to fix it? Update Here is my boot.log if it provides few insight fsck from util-linux 2.19.1 fsck from util-linux 2.19.1 /dev/sda1 was not cleanly unmounted, check forced. ubuntu: clean, 501325/1310720 files, 2958455/5242880 blocks /dev/sda1: 241/51272 files (3.3% non-contiguous), 73541/102400 blocks mountall: fsck /boot [358] terminated with status 1 Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox ... /dev/sda1 is a separate grub partition for my dual OS's

  Read the article

• Broadcom bcm4311 rev2 Full disabled on battery

  - by Antonio BG

  Ok this is my problem... My problem begins while ago when I installed ubuntu 10.10. (is the same with 11.04,11.10...) My wireless card is disabled if the power cord is unplugged, and the only way to fix this is rebooting my pc WITH the power cord plugged and if I use lspci command, it doesn't show me the wireless card. is like if I've removed the wireless board from my laptop port. I've searched a lot of solutions for bcmw4311 issues, but none of them fix my problem because when apply one of the fixes, if I unplug the cord, my wireless card it just gone away... I have dual boot on my pc(w7,ubuntu), I've tried with full installation just to see if this is the problem, but not, is the same. On windows all work correctly with and without power cord.. so this is not a hardware problem, is more like a kernel problem. anyway I can use wireless with power cord plugged, but c'mon this is a laptop not a desktop pc XD haha any help is welcome

  Read the article

• Ubuntu 13.10 gets stuck on boot

  - by Robert frost

  I have updated (via the Software Updater) Ubuntu 13.04 to Ubuntu 13.10. After it had finished the installation, the system required a reboot. When I reboot and load Ubuntu it will get stuck on the logo. I managed to boot into the recovery (both console and graphics mode) but I can't figure out how to repair it. I have tried a sudo update-grub, but nothing different happened. I have also tried sudo apt-get install gnome, but the same result... I am using a dual-boot Win7 + Ubuntu.

  Read the article

• Rebooting yes, Shutdown no

  - by Chiotis Leonidas

  Hello everyone and thanks in advance. I am new in Ubuntu and have the 12.04 version dual boot with Windows XP. I have the following problem. The laptop can reboot using the reboot option from the menu but it cannot shut down. It starts shutting down, the dots appear but then it freezes and does not turn off. Sometimes it shuts down normally (usually just after an update) but then it loses that capability again. Some strange things, I noticed that when the dots freeze, the USB mouse loses power, BUT the usb-powered cooling pad continues to work The only Fn shortcuts that work all the time are the Volume up, down and mute, BUT sometimes when the other Fn combinations (screen-off etc) work the computer shuts down normally I searched a lot on my own, please help.

  Read the article

• High temperature on my laptop with Radeon Mobility HD4670

  - by Lorthirk

  As almost everyone here, I guess, in these days I downloaded Quantal Quetzal to give it a try. However I noticed that my laptop runs fairly hot with cooling fans almost always on, even sitting in the desktop doing nothing. I downloaded XSensor to read temperature sensors, and I saw that while CPU stays on about 65°C, so quiet normal I guess, the GPU sits at 75°C. In comparison my actual Windows 7 installation, which dual boots witb Quantal, stays at 59°C CPU and 65°C. So I went reading and learned that AMD dropped support for my video card from fglrx package, and that fglrx-legacy won't support 1.13 Xorg, so I'm basically stuck with OSS drivers. So I was guessing if there's anything I can try, and if it's possible that the OSS drivers could be the cause of the high temperature?

  Read the article

• Changing Workspaces changes active window

  - by puk

  I have a dual monitor setup, but I am sure it's the same with a single monitor. If I have two applications open, one is vim, the other is google chrome. Lets say the focus is on vim. If I switch to another workspace (ie. alt3) then switch back to that workspace (ie. alt1) now the focus is on google chrome. This process toggles indefinitely so long as I don't transition too quickly. Is there any way to prevent/disable this?

  Read the article

• Missing launcher, top panel without icons, an ATI driver problem?

  - by jlotero

  After upgrading to Ubuntu 11.10, the following problems occurs when accesing in ubuntu mode (3D): the launcher is missing, top panel without icons on the right side, and I can only restart with Terminal (Alt-T and then sudo reboot). No problems in 2D. It occurs on my PC with AMD Athlon (tm) II X4 640 Processor, Radeon HD5670 and both with the 32-bit and 64 bits versions of Ubuntu. Both versions work well on an older PC with AMD Athlon 64 x2 Dual Core 4200 + processor, and an Nvidia integrated graphics card (C61 GeForce 6150SE nForce 430). Could it be a problem with the ATI driver?

  Read the article

• how to change dolphin's select region of a file/folder (in detail view mode)

  - by Daniel

  Since nautilus has removed the dual pane. So I turn to dolphin. I am wondering how to change the default select behavior in detail view mode? Now to select a file/folder, my cursor has to hover over that file/folder and then the left click will take effect, but I much prefer the nautilus way, that is as long as your cursor is in the same row of that file/folder, left click picks up that item. This I think is more robust for user selection, it is faster. Any ideas how to achieve this in dolphin?

  Read the article

• Lexmark X7170 shows documents as printed when they haven't

  - by Mehmet

  I made the move from Windows 7 to Ubuntu not dual booting because I have decided to quit gaming to spare more time for my studies. I just needed an OS for browsing the web and word processing etc. After I installed Ubuntu I installed the AMD GPU drivers, after which I clicked on the little printer icon, selected add printer and it found the drivers for the Lexmark 7000 series and I installed them. Now my problem is when I print something from Writer it processes it thinks its completed it, when in fact it hasn't printed anything. I tried printing a test page but it was stuck on processing for 5 minutes. I have restarted my computer and turned the printer on and off. I'm running 64bit if that changes anything.

  Read the article

• Battery issues on Dell Inspiron XPS14z Ultrabook

  - by querolus

  I'm new in the Ubuntu world. I just bought a Dell Inspiron XPS 14z Ultrabook and installed Ubuntu to dual boot with Windows thanks to the Ubuntu Secured Remix package. Everything works fine except the battery. I have, at most, 1h 30' battery life. With windows it can last more than 3h. Moreover, and I guess it's related to the battery issues, the fan is constantly running at high speed while it does not when working with windows. Do you know where can be the problem?

  Read the article

• Asus 1001P freezes after chaging network settings

  - by auntiquarian

  I'm running Ubuntu 11.04 on a Asus PC 1001P in a dual boot environment with XP. All has been running fine for several weeks, but: I've just changed ISP (from Tiscali to BT), and had already sorted out connection, registration, etc. on a Dell laptop. On the Asus I went into Ubuntu to alter the wireless network details (i.e. selected the new network, and entered the password). Ubuntu immediately started running slowly, and after rebooting it now freezes when it gets to the Ubuntu logo and gets no further. Please help, lovely Ubuntu experts.

  Read the article

• Wifi works perfectly on Windows, but drops on Ubuntu

  - by alecRN

  I have a dual-boot computer with Windows XP on one partition and Ubuntu 10.10 on the other. In Windows XP I can connect to a hidden wireless network (WPA-PSK AES) perfectly, and I was finally able to install the driver for the adapter on Ubuntu (RNX-N180UBE, hardware id RTL8191SU). It works fine when I first boot the computer and log in, but then after a few minutes the network suddenly stops working completely. If I try to reconnect it, the network manager claims to have connected, but in actuality it's still down. At some points, I have been able to connect to a public network even while the private network didn't work, but that eventually wouldn't work at all either.

  Read the article

• Ubuntu freezes when gdm starts

  - by Enrique

  I have Ubuntu 10.10 (upgraded from 10.04) I was browsing in Firefox yesterday, then the PC suddenly did a reset Once it restarted, everything went normal until gdm begun showing. Then everything froze and locked when userlist showed. I can't move mouse pointer nor do anything with keyboard at this point (just after userlist shows in gdm). PS: Both, mouse and keyboard work fine, because this Ubuntu is dual-booting with a Windows XP install which loads/works fine. Here is my .xsession-errors file, but I don't have a clue what may be wrong. Thanks http://pastebin.com/GVtneEAF

  Read the article

• No options for sound output

  - by Chef Flambe

  Newbie here. Trying out Ubuntu for kicks. I have a 10.04 Ubuntu system dual booting on my Windows 7 laptop, fully updated, an Asus A53S. I have an external Samsung monitor/tv hooked up via HDMI. I'm getting sound from the external monitor fine when using Win7 but can't get anything with Ubuntu. I've read threads here about similar stuff and they say go check my sound options but I don't have any additional options than the one listed - Internal Audio. What else can I check/do?

  Read the article

• Can't boot ubuntu on Lenovo V570

  - by Aaron

  I recently tried to install Ubuntu on my new Lenovo V570, planning to dual boot 11.10 with Windows 7. I realized after installing that it would boot straight into Windows, so I looked up the issue. I read something about UEFI, and found a page suggesting that I wipe the drive with GParted, installing a msdos partition table, and then install Ubuntu. (I tried linux mint first, because that's what I had on my flash drive at the moment.) I attempted this, and now I'm left with a computer that won't boot anything from the hard drive. If I install Ubuntu or Linux Mint 12 using either MSDOS or GPT, it simply skips the hard drive. My BIOS has no option to disable EFI, and I'll admit I know shamefully little about EFI or different types of partition tables. I'd like to know what I have to do to make my computer boot again.

  Read the article

• Unable to install Steam 64bit - Wrong architecture (Lubuntu 12.04)

  - by Ian

  I'm on a new install of Lubuntu 12.04 on an Acer Aspire 5534 (specifications here, tl;dr: AMD dual-core 64bit) trying to install steam_latest.deb from the Steam website. When I open gdebi to install, it tells me that it's uninstallable because it's for a i386 architecture. I've tried installing ia32-libs (installed, no success), gdebi --add-architecture i386 (with and without --force, command unknown). This is all I've found to fix the problem, but none of it has worked for me. Any suggestions are welcome, thanks for your time.

  Read the article

• Algorithm to increase odds of matching when randomly selecting

  - by Bryan

  I am building a mobile game loosely based on dual n-back http://brainworkshop.sourceforge.net/tutorial.html Now with the game I have 9 squares (numbered 1 through 9) and 9 letters (A through K) In the current code, I randomly select a square (e.g. 3) and a letter (e.g. C), then repeat the random selection for the next turn. For 1-back, I test whether either, neither or both match the previous turn. The problem with my current code is I get very few matches - I can go through many turns without having either match. How can I increase the match frequency, or alternatively decrease the randomness so a match is more likely? I am not looking for specific code (but pseudo-code would be fine) - just more an approach to increase match frequency.

  Read the article

• Wubi doesn't install Ubuntu

  - by Nick

  I've tried 4 times on 2 different computers. After downloading wubi, and installing Ubuntu inside Windows XP, I restart and get the dual boot screen. I choose Ubuntu, and then nothing, my screen flashes for a few minutes with the Ubuntu colors. I restart and go to Ubuntu recovery, where it says "shadow passwords now on" and "clock off by a day-Fixed". I restart to only get the same thing, but Xubuntu, in stalled on one, but it's Ubuntu I want to try. Any thoughts ??

  Read the article

• Fresh install of 12.04 Kernel panic

  - by user70260

  I am attempting to install Ubuntu 12.04 on my computer. After the Ubuntu splash screen, the computer throws up this error: sr 2:0:1:0: [sr0] Unhandled error code Kernel panic - not syncing: Attempted to kill init! PID: 1, comm: run-init Not Tainted 3.2.0-23-generic #36-Ubuntu The computer hardware is as follows: Core 2 quad 9400, 8gb RAM, GTX 275, 3 Mech HD, 2 SSD, Win 7 install. I would like to dual boot Ubuntu on this computer if possible. I did try placing this disk in my laptop and booted successfully which leads me to believe the fault lies with the desktop. Under windows all hardware seems to work ok. Any ideas?

  Read the article

• windows system (bootloader) partition accidently deleted during multiple installs

  - by S.Y.T.

  After experimenting with multiple variations of backtrack and xbmcbuntu variations of Ubuntu with dual boot successfully, my windows partition became unrecognizable to grub. I used my windows boot CD to try to correct the problem. However, I deleted all partitions except for the NFTS one that contains my old windows install. (And, merged all other ones into that in hopes of getting back to the windows boot loader and out of grub) Now, all I get is a grub command prompt when I try and boot the system (how??? - I thought I deleted grub) And, now the windows boot disc doesn't even recognize the install. I've tried TRK to try and resolve the problem. Though I must admit ignorance in correctly using this utility. I've searched for other answers to this problem. Any help would be much appreciated. S.Y.

  Read the article

• Ubuntu 12.04 freezing on startup

  - by Frank

  Have been looking everywhere to find a solution to this problem but have yet to find a solution. I am running 64 bit 12.04 LTS on a AMD C-50 Dual core 6 gigs ram AMD Ratheon HD 6250. The problem I am experiencing is when ubuntu gets to the wallpaper screen it will sometimes freeze soon after the the image appears or shortly there after gnome loads locking up keyboard and mouse. When I try to log in via the console the same thing happens (this is as ubuntu is loading). At the moment the system is set to auto login previously it was set to ask for password but it did the same thing. Switching to from lightdm to gdm did nothing to alleviate the issue. I have never had so many issues with ubuntu I have to say 12.04 is the most buggy version yet.

  Read the article

• Ubuntu 12.04 Battery problem

  - by Rahul

  I have my laptop ( Dell Inspiron 14R) on dual boot with Ubuntu 12.04 and Windows 7. While using Windows 7, I used to get about 2.5-3 hours on battery fully charged (with my cellphone connected for 3g Internet). The battery is almost 2 years old. But in Ubuntu 12.04, I'm getting only about 1-1.5 hrs on battery. I tried installing jupiter, also tried some tweaks that were mentioned in the forums, like editing the grub file. But nothing seems to work. I am not sure if any app is draining the battery. The one application that I use always is firefox. It's always open. Is there any way I could get at least 2.5 hrs of battery time?

  Read the article

• Wordpress Multisite (Subfolders) - Google Analytics Tracking

  - by mmundiff

  I have a Wordpress multisite subfolder instance that I would like to track via Google Analytics. I guess optimally this would be a plugin which I could track each site in two places The Main Tracking Code which totals all traffic from the Multisite instance The Individual Site tracking code to see how each site specifically is doing. I think this plugin would have worked for me if I had a subdomain multisite instance: http://wordpress.org/extend/plugins/google-analytics-multisite-async/installation/ I know I can manually place the dual tracking code (http://www.markinns.com/articles/full/adding_two_google_analytics_accounts_to_one_page) but that would involve editing a theme and I have multiple sites using TwentyEleven template. I don't think I can edit the theme and not have it wreak havoc on the rest of the sites using TwentyEleven. So has anyone done this? Is there a a technique I'm missing? Is there a plugin available to do this in Multisite Subfolder installations? Is there a way to manually insert GA codes into themes which are used by multiple sites? Any insight is appreciated.

  Read the article

• Connecting to a Windows SVN server from Ubuntu

  - by skytreader

  I need to access an SVN repo hosted on a Windows machine from Ubuntu. However, even if I supply the proper credentials, it denies me access, apparently because Windows does not allow Linux connections (as they told me); sure enough, I got in when I tried to checkout from my XP partition. While I have my box dual-booted, it is inconvenient to switch just for SVN. So, does anyone know how I can access that SVN repo from Ubuntu? I've tried installing TortoiseSVN and Windows Subversion under Wine but I can't even get them to run; they were asking for some DLLs that I don't know how to supply. I've thought of installing a virtual XP just for SVN but I consider that too extreme and I'd be glad if anyone can advise a simpler workaround.

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >