Search Results

Search found 23994 results on 960 pages for 'internet explorer 64bit'.

Page 116/960 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

  • Internet Pings but Does Not Load

    - by t3techcom18
    From what I've been seeing and been doing my research for the past two days, many people have been having the same issues throughout the years, however, this is the first time I've encountered this issue and many of the specific workarounds or fixes have not worked for me. I've been trying to work through this for 24 hours straight now, but to no avail so many thanks to those that can help. On Monday night, got home from work; surfing the internet for half an hour, everything was fine as always. Just after half an hour, my Internet got very sluggish and then it died completely. I thought it might have been the an update I just put through in terms of Windows Update that said was a critical update for MSE, as the same thing happened a few years ago. I did a System Restore to two different dates that were in the past two weeks, nothing. Uninstalled MSE and disabled Windows Defender and the Windows Firewall: Nothing. Reset IE Options, Reset Winsock, Dumping DNS, many of the other command prompt screens to reset items: Nothing. Reset the modem: Nothing. What DID work, however, was a ping test to Yahoo. The ping test worked, saying all four packets was recieved, yet nothing else popped up. LAN and CenturyLink said everything worked on their end and that everything was connected properly, as well as the speeds working fine. CenturyLink said in their notes that they thought Port 80 was blocked. I went and put in the Firewall to allow Port 80 but it didn't make any difference whatsoever. I remembered I had a spare modem laying around and I switched them up, both modem and the cords - nothing. I then hooked it up to my netbook to see if that would work, as it usually does - connection didn't work there either. Like I said, it's been about 24 hours now and this is increasingly frustrating, as I've tried all solutions (While browsing through 10 search results pages on my phone) suggested and still nothing. Any suggestions and tricks would be greatly appreciated! Here's my specs: Windows 7 32-bit Home Premium Intel Core 2 Duo 3.14 Ghz 4 GB Kingston DDR2 RAM eVGA nForce 750i SLI eVGA GeForce GTX 560 Ti FPB ISP: CenturyLink No router Modem: CenturyLink 660 Series Hardwired connection PLEASE NOTE: This is the only computer I have (Like I said, the netbook solution didn't work), so downloading programs and such is not an option til I get to other computers somewhere else, like right now. Unless someone knows of a way of copying/pasting a file in Windows and then transferring said info to an Android smartphone, this is gunna take a while haha. Patience is requested.

    Read the article

  • ClearMyTracksByProcess - all options?

    - by Jonny Blaze
    I've seen the list of values floating around the internet for ClearMyTracksByProcess Delete Temporary Internet Files: RunDll32.exe InetCpl.cpl,ClearMyTracksByProcess 8 Delete Cookies: RunDll32.exe InetCpl.cpl,ClearMyTracksByProcess 2 Delete History: RunDll32.exe InetCpl.cpl,ClearMyTracksByProcess 1 Delete Form Data: RunDll32.exe InetCpl.cpl,ClearMyTracksByProcess 16 Delete Passwords: RunDll32.exe InetCpl.cpl,ClearMyTracksByProcess 32 Delete All: RunDll32.exe InetCpl.cpl,ClearMyTracksByProcess 255 Delete All + files and settings stored by Add-ons: RunDll32.exe InetCpl.cpl,ClearMyTracksByProcess 4351 But it's not a complete list of all the options, and I can't seem to find a complete list (whether there isn't one published, or this one has been republished too many times and is hogging all the search results, I'm not sure). What I'm looking to do is delete Cookies + Temp + Add-ons, but preserve History, Form data, and Passwords. Has anybody found a complete list of all the available options? Or just the option for Add-ons so I can do the math myself? (e.g. Add-ons value + 8 + 2 = the answer I'm looking for) Thanks for looking at my question!

    Read the article

  • Why would the Default Gateway constantly require resetting?

    - by Raven Dreamer
    I've had a (mostly) steady internet connection for the past two months. For the last hour, however, my connectivity has been dropping every 10 minutes or so, and must be reset. So far, I've always been able to fix the issue by running Windows network diagnostics (On Windows 7 64 bit), but the lack of constant internet is making it a pain to try and stream video, download games through steam, etc. Windows always reports a fix by "Resetting the Local Area Connector", telling me: Default Gateway Not Available. What's going on? Is the trouble on my end, or with my ISP? (Timewarner Cable) Things I've Tried: Reinstalling the motherboard's LAN drivers Manually setting a default gateway (gets cleared, reverts to default settings) Unplugged (Hard Reset) the router Unplugged / replugged ethernet cable.

    Read the article

  • Virtual Network Interface and NAT disables localhost access for MySQL and Apache

    - by Interarticle
    I'm running an Ubuntu Server 12.04, and recently I configured it to do NAT for my laptop. Since the server has only one NIC, I followed instructions online to create a virtual network device (eth0:0) that has a LAN IP address, then further configured iptables and UFW to allow internet sharing. However, just a few days ago, I discovered that one of the PHP pages hosted on the server failed for no apparent reason. A little digging revealed that the MySQL server started refusing connections from localhost. The same happened with a page (PhpMyAdmin) that was configured to be accessible only from localhost (in Apache2). The error, as shown by $mysql --protocol=tcp -u root -p looks like ERROR 1130 (HY000): Host '<host name of eth0>' is not allowed to connect to this MySQL server However, the funny thing is, I configured the mysql server to allow root access from localhost (only). Moreover, the mysql server listens only on 127.0.0.1:3306, as shown by: sudo netstat -npa | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 1029/mysqld which means that the connection could have only come from 127.0.0.1 (Note that MySQL is working because I can still connect to it via unix domain sockets) In effect, it seems that all tcp connections originating from 127.0.0.1 to 127.0.0.1 appear to any local daemon to come from the eth0 IP address. Indeed, apache2 allowed me to access PhpMyAdmin after I added allow <eth0 IP address>. The following are my network configurations (redacted): /etc/hosts: 127.0.0.1 localhost 211.x.x.x <host name of eth0> <server name> #IPv6 Defaults follows .... /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 211.x.x.x netmask 255.255.255.0 gateway 211.x.x.x dns-nameservers 8.8.8.8 # dns-* options are implemented by the resolvconf package, if installed dns-search xxxxxxx.com hwaddress ether xx:xx:xx:xx:xx:xx auto eth0:0 iface eth0:0 inet static address 192.168.57.254 netmask 255.255.254.0 broadcast 192.168.57.255 network 192.168.57.0 /etc/ufw/sysctl.conf: #Uncommented the following lines net/ipv4/ip_forward=1 net/ipv6/conf/default/forwarding=1 /etc/default/ufw: DEFAULT_FORWARD_POLICY="ACCEPT" #Changed DROP to ACCEPT /etc/init/internet-sharing.conf (upstart script I wrote), section pre-start script: iptables -A FORWARD -o eth0 -i eth0:0 -s 192.168.57.22 -m conntrack --ctstate NEW -j ACCEPT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT iptables -A POSTROUTING -t nat -j MASQUERADE Note again that my problem here is that programs cannot access localhost tcp services, from the server itself, and that access is blocked because the services have access control allowing only 127.0.0.1. I have no problem connecting (as in TCP connections) to services via tcp, even if the services listen only on 127.0.0.1. I do NOT want to connect to the services from another computer.

    Read the article

  • Incoming connections from 2 different Internet connections

    - by RJClinton
    I am hosting a Gameserver on my Windows 2003 Server 32 Bit Server. Due to some limitations of my ISP, I have to take 2 Internet connections in order to satisfy my bandwidth requirement. I am facing serious problems here. The Internet is supplied using Wimax. I am given a POE and the RJ45 from both the POE (2 connections) are plugged into a Netgear 100mbps Switch and another RJ45 connects the server to the switch. I have tried to configure the IP addresses and gateway of both connections to the single NIC in the server. The IP series and the gateway of each Internet connection are very much different. I know that this is not the proper approach, because alternate gateways are meant to be only for backup in case of main gateway failure and the usage of the gateways depends upon the metric (correct me if I am wrong). I am planning to get a second PCI NIC so that I can connect each of the Internet connections into its respective NIC. If I use this approach, will I be able to accept connections on both NICs? Also, please suggest any other alternatives that I might use.

    Read the article

  • How do I stop apps trying to use a dial-up connection?

    - by ProfKaos
    Every now and again, I might have to use a dial-up internet connection via another tethered phone, i.e. Bluetooth connection to the GPRS modem. Now I am back on 'ops normal', i.e. using a shared internet connection on my own phone, or on my 3G stick, but some apps, especially IE9, keep popping up a 'dialup connection' dialogue, which I cannot dismiss enough times ever, to make to stay away. How can I tell these idiot applications that I no longer need a dial-up connection?

    Read the article

  • Network bottleneck/throttling issue

    - by Gavin
    Hi all, It's my first day at a new company and i've been given the task to find out an issue with the internet connection. I noticed that whilst I was downloading a large file, the network grinds to a halt, except for my download. At first I thought it was the internet connection/modem but it seems that whilst the lockdown occurs, I am unable to access any network device. Has anyone experienced this before and if so, do you have any pointers? Looking at the setup. They have an DSL modem that connects to a 10/100 switch. There are only 5-6 computers on the network. Cheers Gavin

    Read the article

  • Connection issues with Linksys WRT54GL / Tomato

    - by Phoshi
    So I recently purchased a new router, and decided to put Tomato on it for some of the fancy features, like graphs. Only problem is, now I've installed it I can't connect to the internet any more! What I've done so far is plug the router in, connect to it wirelessly, and upgrade the firmware to the right version for my router. This went swimmingly, the router restarted, and everything's Tomatoey. Except it won't, now, connect to the internet, and I'm entirely unsure what I've missed. My old router was a BT Homehub, my ISP is BT (British Telecommunications). I'm a bit lost, this is the first time I've done any of this 3rd party firmware stuff.

    Read the article

  • Anybody seen this behavior with Sql Server Reporting Services, a 64bit OS and an Oracle datasource?

    - by dkackman
    I'm working on a Sql Server Reporting Services solution that queries across both a Sql Server data source and an Oracle 10g data source. My dev box is Windows 7 64bit with Sql Server 2008R2 and I'm hosting IIS7 and SSRS on that system for development; using VS.NET for designing the reports. I have been having errors when running the report where SSRS complains about loading the 32 bit Oracle client in a 64bit process. There a number of threads out there about how to solve that. The thing is, they all come down to making sure you have the 64bit Oracle, client which I do. The weird chain of events I have goes like this: Create initial Oracle datasource and wire up report (it works) Edit Oracle datasource connection (it stops working with BadImageFormatException 32bit/64bit error message) uninstall and reinstall Oracle client (it works) Edit Oracle connection again (it stops working with BadImageFormatException 32bit/64bit error message) So short of reinstalling the client every time I change the connection string I am at a complete loss. Has anybody seen this sort of behavior? And if so what the heck am I doing wrong?

    Read the article

  • Wireless Repeating with two Netgear N750 (WNDR4300)

    - by jomo1911
    I have a Netgear N750 as my main router, which connects to the internet via a modem. I have a second Netgear N750 which I want to use to repeat the wireless signal of the main router. I logged in to routerlogin of my main router (192.168.1.1) and set up the "Wireless Repeating Function". I set it as the "Wireless Base Station" and filled in the MAC adress of my second Netgear N750. Then I logged in to routerlogin of my second router and set it up as the "Wireless Repeater", I gave it the IP 192.168.1.11 and filled in the MAC adress of the base station. During the setup of the second router (Repeater) I had to disable all security functions. If I connect to the repeaters' WLAN signal, I get no internet connection. Maybe you can help me, thanks

    Read the article

  • After installing Windows Phone 8 SDK, Connectify doesn't work

    - by Pratyush Nalam
    Today I installed Windows Phone 8 SDK from the official site. After installing and a couple of restarts (it restarted the PC to enable Hyper-V), I opened Connectify. I use Connectify Hotspot to connect my iPod to the internet as I have an ethernet connection and no wireless router. The problem is that now, Connectify doesn't show WiFi in Share Over. The attached screenshot shows this. Previously, before I installed the SDK, it would show Ethernet and Wi-Fi. I would select WiFi and share my internet. Now, this is completely screwed. EDIT: I found out that the Microsoft Virtual Wi-Fi Miniport Driver has got disabled and I am not able to enable it again. Please advise. Please advise on what to do Hardware: Windows 8 Pro with Media Center, Apple MacBook Pro 9,1 15 inch Mid-2012 (non retina)

    Read the article

  • Ip doesn't change when switching networks, although automatic ip is set. Cause of the issue known

    - by Julio Acevedo
    I have two routers at my house. Both of them have DCHP server enabled. One of them is 192.168.1.1 and gives adresses from 192.168.1.2 to 192.168.1.32 The other one is 192.168.1.50 and gives adresses from 192.168.1.51 to 192.168.1.99 The problem is that I only have internet access in one because my ip is 192.168.1.7, and when I switch to the other one, the ip remains 192.168.1.7, even though I have automatically get a ip adress in Ipv4. When I manually change my ip to one in the range allowed by the router, I can browse the internet. Any ideas how to solve this? Thank you.

    Read the article

  • Save Website To Disk

    - by Christian
    Hello everyone! I have a very poor internet connection when I'm living at home. The only time I have a good internet is at college. When I get home, the most mundane task like opening a web-page becomes a five minute stress-test. So what I was thinking was to download the web-page, for example superdickery. I was wondering what the best method would be to download the entire image archive of the page? Would this be illegal, if I did this? It's just that I don't want to be frustrated every time I just want to load a simple jpeg image.

    Read the article

  • How can a 1Gb Java heap on a 64bit machine use 3Gb of VIRT space?

    - by Graeme Moss
    I run the same process on a 32bit machine as on a 64bit machine with the same memory VM settings (-Xms1024m -Xmx1024m) and similar VM version (1.6.0_05 vs 1.6.0_16). However the virtual space used by the 64bit machine (as shown in top under "VIRT") is almost three times as big as that in 32bit! I know 64bit VMs will use a little more memory for the larger references, but how can it be three times as big? Am I reading VIRT in top incorrectly? Full data shown below, showing top and then the result of jmap -heap, first for 64bit, then for 32bit. Note the VIRT for 64bit is 3319m for 32bit is 1220m. * 64bit * PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22534 agent 20 0 3319m 163m 14m S 4.7 2.0 0:04.28 java $ jmap -heap 22534 Attaching to process ID 22534, please wait... Debugger attached successfully. Server compiler detected. JVM version is 10.0-b19 using thread-local object allocation. Parallel GC with 4 thread(s) Heap Configuration: MinHeapFreeRatio = 40 MaxHeapFreeRatio = 70 MaxHeapSize = 1073741824 (1024.0MB) NewSize = 2686976 (2.5625MB) MaxNewSize = -65536 (-0.0625MB) OldSize = 5439488 (5.1875MB) NewRatio = 2 SurvivorRatio = 8 PermSize = 21757952 (20.75MB) MaxPermSize = 88080384 (84.0MB) Heap Usage: PS Young Generation Eden Space: capacity = 268500992 (256.0625MB) used = 247066968 (235.62142181396484MB) free = 21434024 (20.441078186035156MB) 92.01715277089181% used From Space: capacity = 44695552 (42.625MB) used = 0 (0.0MB) free = 44695552 (42.625MB) 0.0% used To Space: capacity = 44695552 (42.625MB) used = 0 (0.0MB) free = 44695552 (42.625MB) 0.0% used PS Old Generation capacity = 715849728 (682.6875MB) used = 0 (0.0MB) free = 715849728 (682.6875MB) 0.0% used PS Perm Generation capacity = 21757952 (20.75MB) used = 16153928 (15.405586242675781MB) free = 5604024 (5.344413757324219MB) 74.24378912132907% used * 32bit * PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 30168 agent 20 0 1220m 175m 12m S 0.0 2.2 0:13.43 java $ jmap -heap 30168 Attaching to process ID 30168, please wait... Debugger attached successfully. Server compiler detected. JVM version is 14.2-b01 using thread-local object allocation. Parallel GC with 8 thread(s) Heap Configuration: MinHeapFreeRatio = 40 MaxHeapFreeRatio = 70 MaxHeapSize = 1073741824 (1024.0MB) NewSize = 1048576 (1.0MB) MaxNewSize = 4294901760 (4095.9375MB) OldSize = 4194304 (4.0MB) NewRatio = 8 SurvivorRatio = 8 PermSize = 16777216 (16.0MB) MaxPermSize = 67108864 (64.0MB) Heap Usage: PS Young Generation Eden Space: capacity = 89522176 (85.375MB) used = 80626352 (76.89128112792969MB) free = 8895824 (8.483718872070312MB) 90.0629940005033% used From Space: capacity = 14876672 (14.1875MB) used = 14876216 (14.187065124511719MB) free = 456 (4.3487548828125E-4MB) 99.99693479832048% used To Space: capacity = 14876672 (14.1875MB) used = 0 (0.0MB) free = 14876672 (14.1875MB) 0.0% used PS Old Generation capacity = 954466304 (910.25MB) used = 10598496 (10.107513427734375MB) free = 943867808 (900.1424865722656MB) 1.1104107034039412% used PS Perm Generation capacity = 16777216 (16.0MB) used = 11366448 (10.839889526367188MB) free = 5410768 (5.1601104736328125MB) 67.74930953979492% used

    Read the article

  • Chrome - Why am I automatically authenticated to a web app even after clearing browser cookies?

    - by Howiecamp
    I am accessing a web application using Chrome. If I sign out of the app and clear all Chrome history/cookies/etc (even Flash cookies which are now handled by Chrome in the same Clear History area) and then re-access the site, I am automatically logged in without being prompted for credentials. I then launched Chrome in Incognito mode and was able to reproduce the same behavior. However, the I was prompted upon the first logon while in Incognito mode. The web application behaves as expected in Internet Explorer 10. Some info about the application: It's a Sharepoint site using NTLM authentication The credentials are Active Directory-based, as the username is domain\username My connection is over the Internet and there is no AD relationship between my local Windows account, my Windows PC. In other words I (meaning my locally logged on user and my PC) are not in any way part of their AD domain. The site is running SSL on port 443 Why might Chrome be automatically authenticating me?

    Read the article

  • f12 and ctrl + f5 not working correctly

    - by ComatoseDuck
    When I came back to my work computer after being away for a week I found out when I try to clear the cache and refresh the page via ctrl + f5 (or just f5) I get the prompt "Type the Internet address of a document, and Internet Explorer will open it for you" with a drop down list in IE. When I try f5 in Chrome and FF it opens the "Open file" dialog box. When I try to f12 for Dev tools in IE, Chrome & FF it opens up the print dialog box. Why is this happening and what can I do to revert it back to the way it was?

    Read the article

  • Internet zone is opened when broswer is opened from installer created by .Net 3.5sp1

    - by priya
    Hi All, I have project created in VS2005 and .Net 2.0. The installation is a web-based installation. After installing the proe-requisites the installer opens up the browser to continue with web-based install. On this, it opens up in intranet zone and works perfectly. I recently migrated the project to VS2008 Sp1 and .Net 3.5sp1. No change in my code and the test environment. Here the browser gets opened up in the Internet zone which prevents it from moving forward, until unless I open up a new browser manually and copy paste the url. The internet security options on the both the case are - Internet --- High. For the case2, if i have the security internet option to be 'Medium', it works well. I am not sure why this issue comes up when I change the VS and .Net version. More over the browser gets opened with system priveleges rather than administrator privileges. Please let me know any solution on this. Thanks, Priya.R

    Read the article

  • Can aynone tell me what exactly 32bit/64bit and x86 and AMD64 have to do with the different choices on the download site of Ubuntu?

    - by Elysium
    SORRY for the newbie question, but I am still learning. I am wondering if x86 simply refers to the intel CPUs and AMD64 simply refers to the AMD CPUs? While....32bit and 64bit to the processor types? I was trying to download the intel 64bit version of the Ubuntu installer, but it wont give the option of x86 and AMD64....only the 32bit and 64bit can be chosen. Does this mean that someone with an Intel CPU and another person with an AMD CPU will download the same install file? (obviously depending on the bit version of their CPUs this might differ....but that's another thing).

    Read the article

  • Did MS break IE with update on 2010-01-12?

    - by SpliFF
    I have 4 computers at 2 completely seperate clients that have all experienced the same problem on the same day. Internet Explorer 7 is returning "Page not Found" for all sites. The real kicker is that all other Internet works, including Firefox. At least one of the machines is Vista. Not sure on the other 3. At least 2 of the machines have no proxy server set so it isn't that. Did Microsoft push an automatic update that broke IE7 on Tuesday 2010-01-12? Has anyone else experienced this problem in the last week? This can't be a coincidence. Apart from being located in the same town and being supported by my company (we didn't change anything) these clients have nothing in common except they use Windows and they browse with IE. These machines probably share other traits, like having Spybot installed, however removing Spybot changed nothing. Also, of course i got them to reboot. Still broken.

    Read the article

  • a couple of questions about proxy server,vpn & how they works

    - by Q8Y
    I have a couple of questions that are related to security. Correct me if i'm wrong :) If I want to request something (ex: visiting www.google.com): my computer will request that then it will to the ISP then to my ISP proxy server that will take the request and act as a middle man in this situation ask for the site (www.google.com) and retrieve it then the proxy will send it back to me. I know that its being done like that. So, my question is that, in this situation my ISP knows everything and what I did request, and the proxy server is set by default (when I ask for an internet subscription). So, if I use here another proxy (lets assume that is a highly anonymous and my ISP can't detect my IP address from it), would I visit my ISP and then from my ISP it will redirect me to the new proxy server that I provide? Will it know that there is someone using another proxy? Or will it go to another network rather than my ISP? Because I didn't get the view clearly. This question is related to the first one. When I use a VPN, I know that VPN provides for me a tunneling, encryption and much more features that a proxy can't. So my data is travelling securely and my ISP can't know what I'm doing. But my questions are: From where is the tunneling started? Does it start after I visit the ISP network (since they are the one that are responsible for forwarding my data and requests)? If so, then not all my connection is tunneled in this way, there is a part that is not being tunneled. Since, every time I need to do anything I have to go to my ISP and ask to do that. Correct me if I misunderstand this. I know that VPN can let my computer be virtually in another place and access its resources (ex: be like in my office while I'm in my home. This is done via VPN). If I use a VPN service provider so that I can access the internet securely and without being monitored by my ISP. In this case, where is my encrypted data saved? Is it saved in my ISP or in the VPN service provider? If I use a VPN, does anyone on the internet know what I'm doing or who I am? Even the VPN service provider? Can they know me? I think they should know the person that is asking for this VPN service, am I right?

    Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >