Search Results

Search found 15110 results on 605 pages for 'master password'.

Page 116/605 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

  • Can't clone gitosis-admin.git local from my snow leopard server running gitosis

    - by joggink
    I've installed gitosis as described here: http://gist.github.com/264304 One of the things that I had to adjust was to give my git user permissions to use ssh (which I did trough server admin - access - ssh and added the 'git' user). When I ssh from my local machine (mac osx) as the git user, I get this response: PTY allocation request failed on channel 0 bash: gitosis-serve: command not found Connection to 10.0.0.108 closed. Which I think is normal, because in Pro GIT the author says you should get something like this if you try ssh'ing to the server using your git user: PTY allocation request failed on channel 0 fatal: unrecognized command 'gitosis-serve schacon@quaternion' Connection to gitserver closed. So far so good, I think? Now when I try to clone my gitosis-admin.git repository using this command: $git clone [email protected]:gitosis-admin.git I get this: Initialized empty Git repository in /Users/joggink/gitosis-admin/.git/ bash: gitosis-serve: command not found fatal: The remote end hung up unexpectedly So after doing some searching, I found an answer here on serverfault claiming I should use ssh:// as protocol for my git clone (which I thought is the default git protocol?) However, when I try: $git clone ssh://[email protected]:gitosis-admin.git This is the response: The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: Password: Password: Permission denied (publickey,keyboard-interactive). fatal: The remote end hung up unexpectedly When I type in my own password (because my git user has no password), I get following error: The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: bash: git-upload-pack: command not found fatal: The remote end hung up unexpectedly I added my upload-pack location as followed: $git clone -u /usr/local/git/bin/git-upload-pack ssh://[email protected]:gitosis-admin.git I get the error that gitosis-admin.git isn't a git repo... Initialized empty Git repository in /Users/joggink/gitosis-admin/.git/ The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: fatal: '[email protected]:gitosis-admin.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly I've been searching for a solution for almost a week now, and every topic I've found on the internet gives no result...

    Read the article

  • Lync CMS replication is failing for all Domain Computers

    - by Ravi Kanneganti
    I have Lync Server 2010 and Active Directory installed on 2 different Windows Server 2008 R2 machines. I have added a Windows 7 PC to AD. And I have added this computer to Trusted Application Servers Pool and published the topology. I want to build an UCMA application to extend Lync Server functionality. I have installed UCMA 3.0 SDK in the same computer where Lync Server is residing. But, CMS Replication isn't happening and "Get-CsManagementStoreReplicationStatus" always gives Uptodate as "False" for my Windows 7 PC. I have even tried "Invoke-CSManagementStoreReplication" but nothing changed. Also, this is the error message that I can see in the log file: TL_WARN(TF_COMPONENT) [2]0500.07B8::04/05/2012-14:55:07.296.00000f85 (XDS_Replica_Replicator,FileDistributeTask.Execute:filedistributetask.cs(165))(000000000043B3FA)**Could not distribute the file. Exception: [System.IO.IOException: The process cannot access the file because it is being used by another process.** at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.File.Move(String sourceFileName, String destFileName) at Microsoft.Rtc.Xds.Replication.Replicator.Common.FileDistributeTask.Execute()]. TL_NOISE(TF_DIAG) [2]0500.07B8::04/05/2012-14:55:07.296.00000f86 (XDS_Replica_Replicator,ReplicaTaskContainer<T>.OnError:replicataskcontainer.cs(166))(00000000005C39D4)Enter. TL_INFO(TF_COMPONENT) [2]0500.07B8::04/05/2012-14:55:07.296.00000f87 (XDS_Replica_Replicator,ReplicaTaskContainer<T>.OnError:replicataskcontainer.cs(171))(00000000005C39D4)Task error callback is about to be called. TL_VERBOSE(TF_DIAG) [2]0500.07B8::04/05/2012-14:55:07.296.00000f88 (XDS_Replica_Replicator,PerReplicaTaskManager<T>.HandleTaskError:perreplicataskmanager.cs(230))(000000000385E79C)Enter. TL_INFO(TF_COMPONENT) [2]0500.07B8::04/05/2012-14:55:07.296.00000f89 (XDS_Replica_Replicator,PerReplicaTaskManager<T>.HandleTaskError:perreplicataskmanager.cs(234))(000000000385E79C)Task encountered an error: [ReplicaTaskContainer<FileDistributeTask>{FileDistributeTask{E:\RtcReplicaRoot\xds-replica\from-master\data.zip, E:\RtcReplicaRoot\xds-replica\working\replication\from-master\data.zip, **Access failed**. (E:\RtcReplicaRoot\xds-replica\from-master\data.zip)}, FileDistributeTask{E:\RtcReplicaRoot\xds-replica\from-master\data.zip, E:\RtcReplicaRoot\xds-replica\working\replication\from-master\data.zip, }}]

    Read the article

  • Postfix won't run while selinux in enforcing mode

    - by Dina Abu-khader
    I enabled selinux forcing mode on Fedora 15 , and I was able to get apache, mysql and memcached to work fine , but I couldn't get postfix to run . I got the following errors : systemd[1]: Unit postfix.service entered failed state. kernel: [146194.117602] type=1400 audit(1318924444.361:3809): avc: denied { module_request } for pid=15447 comm="postfix" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.145456] type=1400 audit(1318924444.389:3810): avc: denied { module_request } for pid=15452 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.146585] type=1400 audit(1318924444.390:3811): avc: denied { module_request } for pid=15452 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.390715] type=1400 audit(1318924444.633:3812): avc: denied { module_request } for pid=15479 comm="postsuper" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.451670] type=1400 audit(1318924444.694:3813): avc: denied { module_request } for pid=15516 comm="postlog" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.459587] type=1400 audit(1318924444.702:3814): avc: denied { module_request } for pid=15517 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.460786] type=1400 audit(1318924444.703:3815): avc: denied { module_request } for pid=15517 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system systemd[1]: PID 15517 read from file /var/spool/postfix/pid/master.pid does not exist. Your service or init script might be broken. systemd[1]: postfix.service: main process exited, code=exited, status=1 following steps were done : I reinstall postfix Created .autorelable and reboot restorecon -R -v /etc/postfix restorecon -R -v /var/lib/postfix Can someone tell me what am doing wrong ? Update It turns out that we have to disable the ipv6 in the main.cf and these errors were disappear. THank you

    Read the article

  • How to install specific version of MySQL?

    - by user85569
    I installed from the repo, 5.0.77... including setup of PowerDNS (and the backend for MySQL). I tried setting up replication from my Master (which is MySQL 5.1.53) but it didn't work even though there were no errors, nothing got replicated. So the last resort is to try the same MySQL version on both the master and the slave (nb, only the slave has pdns installed) How would I go about installing MySQL 5.1.53? I tried downloading the rpm from MySQL (obviously the wrong one, didn't even include the mysql command to shell into the databases), but in turn fucked up the dependencies for pdns' mysql backend. I have the atomic repo which will install MySQL 5.5 (both on my Master server and Slave), but I don't want to do a major upgrade on the master right now as it's in production. Would love some advice!

    Read the article

  • MySQL Replication Error

    - by Ian
    I recently updated my master server to 5.1.41 and noticed that the slave was no longer replicating. It was returning this erorr: 091208 12:53:31 [ERROR] Slave I/O: error connecting to master '[email protected]:3306' - retry-time: 10 retries: 86400, Error_code: 2026 091208 12:53:41 [ERROR] Slave I/O: error connecting to master '[email protected]:3306' - retry-time: 10 retries: 86400, Error_code: 1045 The first error is apparently an SSL error, followed by auth denied.. Thing is, I haven't touched my SSL key or user access in months (and the key is fine, since I'm using the same one on that machine to replicate from other master servers.. Any ideas? Edit: Months later, I've tried with 5.1.44 and the problem is persisting. When I roll back to 5.1.39 replication works great... I guess I can't use anything newer than 5.1.39....

    Read the article

  • re-enabling a table for mysql replication

    - by jessieE
    We were able to setup mysql master-slave replication with the following version on both master/slave: mysqld Ver 5.5.28-29.1-log for Linux on x86_64 (Percona Server (GPL), Release 29.1) One day, we noticed that replication has stopped, we tried skipping over the entries that caused the replication errors. The errors persisted so we decided to skip replication for the 4 problematic tables. The slave has now caught up with the master except for the 4 tables. What is the best way to enable replication again for the 4 tables? This is what I have in mind but I don't know if it will work: 1) Modify slave config to enable replication again for the 4 tables 2) stop slave replication 3) for each of the 4 tables, use pt-table-sync --execute --verbose --print --sync-to-master h=localhost,D=mydb,t=mytable 4) restart slave database to reload replication configuration 5) start slave replication

    Read the article

  • GIT: clone works, remote push doesn't. Remote repository over copssh.

    - by Rui
    Hi all, I've "setup-a-msysgit-server-with-copssh-on-windows", following Tim Davis' guide and I was now learning how to use the git commands, following Jason Meridth's guide, and I have managed to get everything working fine, but now I can't pass the push command. I have set the server and the client on the same machine (for now), win7-x64. Here is some info of how things are set up: CopSSH Folder : C:/SSH/ Local Home Folder : C:/Users/rvc/ Remote Home Folder: C:/SSH/home/rvc/ # aka /cygdrive/c/SSH/home/rvc/ git remote rep : C:/SSH/home/rvc/myapp.git # empty rep At '/SSH/home/rvc/.bashrc' and 'Users/rvc/.bashrc': export HOME=/cygdrive/c/SSH/home/rvc gitpath='/cygdrive/c/Program Files (x86)/Git/bin' gitcorepath='/cygdrive/c/Program Files (x86)/Git/libexec/git-core' PATH=${gitpath}:${gitcorepath}:${PATH} So, cloning works (everything bellow is done via "Git Bash here" :P): rvc@RVC-DESKTOP /c/code $ git clone ssh://[email protected]:5858/SSH/home/rvc/myapp.git Initialized empty Git repository in C:/code/myapp/.git/ warning: You appear to have cloned an empty repository. rvc@RVC-DESKTOP /c/code $ cd myapp rvc@RVC-DESKTOP /c/code/myapp (master) $ git remote -v origin ssh://[email protected]:5858/SSH/home/rvc/myapp.git (fetch) origin ssh://[email protected]:5858/SSH/home/rvc/myapp.git (push) Then I create a file: rvc@RVC-DESKTOP /c/code/myapp (master) $ touch test.file rvc@RVC-DESKTOP /c/code/myapp (master) $ ls test.file Try to push it and get this error: rvc@RVC-DESKTOP /c/code/myapp (master) $ git add test.file rvc@RVC-DESKTOP /c/code/myapp (master) $ GIT_TRACE=1 git push origin master trace: built-in: git 'push' 'origin' 'master' trace: run_command: 'C:\Users\rvc\bin\plink.exe' '-batch' '-P' '5858' '[email protected] 68.1.65' 'git-receive-pack '\''/SSH/home/rvc/myapp.git'\''' git: '/SSH/home/rvc/myapp.git' is not a git command. See 'git --help'. fatal: The remote end hung up unexpectedly "git: '/SSH/home/rvc/myapp.git' is not a git command. See 'git --help'." .. what?! So, can anybody help? If you need any aditional information that I've missed, just ask. Thanks in advanced. EDIT: RAAAGE!! I'm having the same problem again, but now with ssh: rvc@RVC-DESKTOP /c/code/myapp (master) $ GIT_TRACE=1 git push trace: built-in: git 'push' trace: run_command: 'ssh' '-p' '5885' '[email protected]' 'git-receive-pack '\''/ SSH/home/rvc/myapp.git'\''' git: '/SSH/home/rvc/myapp.git' is not a git command. See 'git --help'. fatal: The remote end hung up unexpectedly I've tried GUI push, and shows the same message. git: '/SSH/home/rvc/myapp.git' is not a git command. See 'git --help'. Pushing to ssh://[email protected]:5885/SSH/home/rvc/myapp.git fatal: The remote end hung up unexpectedly Here's the currents .bashrc: C:\Users\rvc.bashrc (I think this is used only by cygwin/git bash): export HOME=/c/SSH/home/rvc gitpath='/c/Program Files (x86)/Git/bin' gitcorepath='/c/Program Files (x86)/Git/libexec/git-core' export GIT_EXEC_PATH=${gitcorepath} PATH=${gitpath}:${gitcorepath}:${PATH} C:\SSH\home\rvc.bashrc (.. and this is used when git connects via ssh to the "remote" server): export HOME=/c/SSH/home/rvc gitpath='/cygdrive/c/Program Files (x86)/Git/bin' gitcorepath='/cygdrive/c/Program Files (x86)/Git/libexec/git-core' export GIT_EXEC_PATH=${gitcorepath} PATH=${gitpath}:${gitcorepath}:${PATH}

    Read the article

  • Replicate between mysql 5.0.xx community and enterprise edition over ssh

    - by Arlukin
    I'm trying to setup a mysql replication over an SSH tunnel. The odd thing about this setup is that I have one master with mysql 5.0.60sp1-enterprise-gpl-log and one slave with mysql 5.0.67-community-log. Could it be so that it's not possible to replicate between community and enterprise edition? As you can see in my log below, it's possible to login on the remote server with the mysql client. But the replication get "Can't connect to MySQL server on '127.0.0.1' (13)" Is it any log file I have forgotten to look in, to get more info? [root@mysql1-av ~]# mysql -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 73 Server version: 5.0.67-community-log MySQL Community Edition (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. The version of the slave mysql [root@mysql1-av ~]# autossh -f -M 20001 -L 3307:10.200.200.200:3306 [email protected] -N [root@mysql1-av ~]# mysql -h127.0.0.1 --port 3307 -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 5189 Server version: 5.0.60sp1-enterprise-gpl-log MySQL Enterprise Server (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> Aborted Login to the master mysql with the mysql client over the ssh tunnel. [root@mysql1-av ~]# mysql -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 75 Server version: 5.0.67-community-log MySQL Community Edition (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> change master to master_host='127.0.0.1', MASTER_PORT=3307, master_user='xxxx', master_password='xxxx', master_log_file='bin.000001'; Query OK, 0 rows affected (0.00 sec) mysql> start slave; Query OK, 0 rows affected (0.00 sec) mysql> show slave status \G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: 127.0.0.1 Master_User: replNSG Master_Port: 3307 Connect_Retry: 60 Master_Log_File: bin.000001 Read_Master_Log_Pos: 4 Relay_Log_File: relay.000001 Relay_Log_Pos: 98 Relay_Master_Log_File: bin.000001 Slave_IO_Running: No Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 4 Relay_Log_Space: 98 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL 1 row in set (0.00 sec) Start the replication, but it breaks on IO. [root@mysql1-av ~]# tail /var/log/mysqld.log 120921 22:17:59 [Note] Slave I/O thread killed while connecting to master 120921 22:17:59 [Note] Slave I/O thread exiting, read up to log 'bin.000001', position 4 120921 22:17:59 [Note] Error reading relay log event: slave SQL thread was killed 120921 22:29:36 [Note] Slave SQL thread initialized, starting replication in log 'bin.000001' at position 4, relay log '/var/lib/mysql/relay.000001' position: 4 120921 22:29:36 [ERROR] Slave I/O thread: error connecting to master '[email protected]:3307': Error: 'Can't connect to MySQL server on '127.0.0.1' (13)' errno: 2003 retry-time: 60 retries: 86400 Because it can't connect to the master server.

    Read the article

  • Ideas for scaling out database architecture

    - by andrew
    We're looking to scale out our existing database architecture and need some advice on which way to go. We currently have 2 web servers behind a load balancer that both read & write to a single master database which replicates to a slave. Ideally, I'd like each of the webservers to point to their own master DB and have the data between the 2 synchronised but from what I've read, using any kind of master-master or ring-replication is discouraged. I'm looking for a general "what do other people do" kind of answer - database vendor isn't a concern at the moment but we'd like to stay with MySQL or convert to MSSQL. Any ideas would be gratefully received. Many thanks, Andrew

    Read the article

  • MySQL: Replicating the MySQL database

    - by Lee
    Hi guys, I have a primary write server (server1) which replications to two servers (server2 and server3) which are query servers. I am replicating all databases to these servers including the MySQL database. When i execute a GRANT as follows replication works perfectly.. GRANT execute,select ON database1.* TO `user1`@`host` IDENTIFIED BY 'password'; However if i did the same GRANT to alter permissions on an existing user without IDENTIFIED clause replication breaks.. Error 'Can't find any matching row in the user table' on query. Default database: 'mysql'. Query: 'GRANT execute,select ON database1.* TO `user`@`host`' If I try and run the query manually i get the same error.. Server 1: mysql> SHOW VARIABLES LIKE "%version%"; +-------------------------+------------------------------------------------------------+ | Variable_name | Value | +-------------------------+------------------------------------------------------------+ | protocol_version | 10 | | version | 5.0.77-log | **my.cnf** [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql old_passwords=1 symbolic-links=0 max_allowed_packet = 100M log-bin = /var/lib/mysql/logs/borg-binlog.log max_binlog_size=50M expire_logs_days=7 [mysql.server] user=mysql basedir=/var/lib [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid Server 2: mysql> SHOW VARIABLES LIKE "%version%"; +-------------------------+------------------------------------------------------------+ | Variable_name | Value | +-------------------------+------------------------------------------------------------+ | protocol_version | 10 | | version | 5.0.77-log | my.cnf server-id=12 master-host=x master-user=x master-password=x master-connect-retry=60 relay-log=/var/lib/mysql/borg-relay.log relay-log-index=/var/lib/mysql/borg-relay-log.index Thanks for taking a look Edit: Currently its running fine, until you do the grant which breaks it... mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 10.128.0.5 Master_User: repli-ragnarok Master_Port: 3306 Connect_Retry: 60 Master_Log_File: borg-binlog.002730 Read_Master_Log_Pos: 4375760 Relay_Log_File: borg-relay.005489 Relay_Log_Pos: 4375899 Relay_Master_Log_File: borg-binlog.002730 Slave_IO_Running: Yes Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 4375760 Relay_Log_Space: 4375899 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 0 1 row in set (0.00 sec) Edit: Broken show slave status from history +----------------------------------+-------------+----------------+-------------+---------------+--------------------+---------------------+-------------------+---------------+-----------------------+------------------+-------------------+-----------------+---------------------+--------------------+------------------------+-------------------------+-----------------------------+------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------+---------------------+-----------------+-----------------+----------------+---------------+--------------------+--------------------+--------------------+-----------------+-------------------+----------------+-----------------------+ | Slave_IO_State | Master_Host | Master_User | Master_Port | Connect_Retry | Master_Log_File | Read_Master_Log_Pos | Relay_Log_File | Relay_Log_Pos | Relay_Master_Log_File | Slave_IO_Running | Slave_SQL_Running | Replicate_Do_DB | Replicate_Ignore_DB | Replicate_Do_Table | Replicate_Ignore_Table | Replicate_Wild_Do_Table | Replicate_Wild_Ignore_Table | Last_Errno | Last_Error | Skip_Counter | Exec_Master_Log_Pos | Relay_Log_Space | Until_Condition | Until_Log_File | Until_Log_Pos | Master_SSL_Allowed | Master_SSL_CA_File | Master_SSL_CA_Path | Master_SSL_Cert | Master_SSL_Cipher | Master_SSL_Key | Seconds_Behind_Master | +----------------------------------+-------------+----------------+-------------+---------------+--------------------+---------------------+-------------------+---------------+-----------------------+------------------+-------------------+-----------------+---------------------+--------------------+------------------------+-------------------------+-----------------------------+------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------+---------------------+-----------------+-----------------+----------------+---------------+--------------------+--------------------+--------------------+-----------------+-------------------+----------------+-----------------------+ | Waiting for master to send event | 10.128.0.5 | repli-valhalla | 3306 | 60 | borg-binlog.002729 | 40429793 | borg-relay.005486 | 40311514 | borg-binlog.002729 | Yes | No | | | | | | | 1133 | Error 'Can't find any matching row in the user table' on query. Default database: 'mysql'. Query: 'GRANT execute,select ON auth_tracker.* TO `mail-sin1`@`%.sin1.netline.net.uk` IDENTIFIED BY 'mail-sin1666'' | 0 | 40311375 | 40429932 | None | | 0 | No | | | | | | NULL | +----------------------------------+-------------+----------------+-------------+---------------+--------------------+---------------------+-------------------+---------------+-----------------------+------------------+-------------------+-----------------+---------------------+--------------------+------------------------+-------------------------+-----------------------------+------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------+---------------------+-----------------+-----------------+----------------+---------------+--------------------+--------------------+--------------------+-----------------+-------------------+----------------+-----------------------+ 1 row in set (0.06 sec)

    Read the article

  • How to use my own connection when using iBatis Data Mapper?

    - by Amitabh
    How can I use my own connection Provider when using iBatis Data Mapper? I have to use UserId and Password of the user performing the db operation in the ConnectionString? E.g. The following ConnectionString has to be modified to insert the userid and password for user performing the db operation. Data Source=TEST;Persist Security Info=True;User ID={userID};Password={password} How can this be handled in iBatis DataMapper?

    Read the article

  • Can't connect to samba

    - by Rick
    Windows 7, connecting to Samba shares I have a follow up question from the link above. I am running Samba 3.0.23d on FreeBSD is release 7.1 I changed the policies as described above but still cannot connect to the samba server with the windows 7 or a server 2008. I feel it is a problem with recognizing the new machines on the network. the windows machines can see the samba server, but cannot connect to it or view any of the files. After changing the security policies the samba server asked for network id and password but would not allow the machine to connect, said they were unknown username or bad password. Here is my current config file. there is no sign of encryption anywhere, should I just add the line? not sure what that would do elsewhere. Workgroup = WWOFFSET server string = WWO File Server (%v) security = server username map = /usr/local/etc/smb.users hosts allow = 10. 127. # If you want to automatically load your printer list rather # than setting them up individually then you'll need this ; load printers = yes # you may wish to override the location of the printcap file ; printcap name = /etc/printcap # on SystemV system setting printcap name to lpstat should allow # you to automatically obtain a printer list from the SystemV spool # system ; printcap name = lpstat # It should not be necessary to specify the print system type unless # it is non-standard. Currently supported print systems include: # bsd, cups, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 50 # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = <NT-Server-Name> password server = SERVER0 # Use the realm option only with security = ads # Specifies the Active Directory realm the host is part of ; realm = MY_REALM # Backend to store user information in. New installations should # use either tdbsam or ldapsam. smbpasswd is available for backwards # compatibility. tdbsam requires no further configuration. ; passdb backend = tdbsam ; passdb backend = smbpasswd # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting. # Note: Consider carefully the location in the configuration file of # this line. The included file is read at that point. ; include = /usr/local/etc/smb.conf.%m # Most people will find that this option gives better performance. # See the chapter 'Samba performance issues' in the Samba HOWTO Collection # and the manual pages for details. # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply ; local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job ; domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. ; domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The default is NO. dns proxy = no # charset settings ; display charset = ASCII ; unix charset = ASCII ; dos charset = ASCII # These scripts are used on a domain controller or stand-alone # machine to add or delete corresponding unix accounts ; add user script = /usr/sbin/useradd %u ; add group script = /usr/sbin/groupadd %g ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u ; delete user script = /usr/sbin/userdel %u ; delete user from group script = /usr/sbin/deluser %u %g ; delete group script = /usr/sbin/groupdel %g unix extensions = no

    Read the article

  • SSH closing by itself - root works fine

    - by Antti
    I'm trying to connect to a server but if i use any other user than root the connection closes itself after a successful login: XXXXXXX:~ user$ ssh -v [email protected] OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to XXXXXXX.XXXXXX.XXX [xxx.xxx.xxx.xxx] port 22. debug1: Connection established. debug1: identity file /Users/user/.ssh/identity type -1 debug1: identity file /Users/user/.ssh/id_rsa type -1 debug1: identity file /Users/user/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3 debug1: match: OpenSSH_4.3 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'XXXXXXX.XXXXXX.XXX' is known and matches the RSA host key. debug1: Found key in /Users/user/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering public key: /Users/user/.ssh/woo_openssh debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Offering public key: /Users/user/.ssh/sidlee.dsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Trying private key: /Users/user/.ssh/identity debug1: Trying private key: /Users/user/.ssh/id_rsa debug1: Offering public key: /Users/user/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Entering interactive session. Last login: Mon Mar 29 01:41:51 2010 from 193.67.179.2 debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: channel 0: free: client-session, nchannels 1 Connection to XXXXXXX.XXXXXX.XXX closed. Transferred: sent 2976, received 2136 bytes, in 0.5 seconds Bytes per second: sent 5892.2, received 4229.1 debug1: Exit status 1 If i log in as root the exact same way it works as expected. I've added the users i want to log in with to a group (sshusers) and added that group to /etc/sshd_config: AllowGroups sshusers I'm not sure what to try next as i don't get a clear error anywhere. I would like to enable specific accounts to log in so that i can disable root. This is a GridServer/Media Temple (CentOS).

    Read the article

  • Logging Apparently Not Working - Can't Set Configure Replication

    - by square_eyes
    I'm using a tutorial to set up a master (single) slave setup. When I run the command show master status; I get Empty set (0.00 sec). I have done a lot of research and believe that the log file I have set up isn't being used properly. The master is a Windows server, and I am administering it through workbench. The log file (log-bin.log) I have configured in the options exists, and is accessible by 'System'. But when I open it as a text file it doesn't have any data. So I'm assuming it's not getting used properly. How can I get the logging happening so I can finish setting up this replication? Edit: Purely for reference here is the tutorial. I followed all the steps and double checked everything up until show master status.

    Read the article

  • Active directory integration not working properly with winbind and samba

    - by tubaguy50035
    I'm trying to get my linux box to use active directory authentication. I believe I have almost everything setup correctly. I'm able to issue wbinfo -g and wbinfo -u and see all the groups and users respectively. Brief intro to my setup: The username I use on my linux box to do admin things is nick. My active directory username is nwalke. They have two different passwords. I am able to log in to the box with nick and that user's password and I'm also able to login as nwalke with nwalke's password. The curious bit: Upon creating the active directory user's home directory, I run a script that requires root access. This is to setup some system wide things like a samba share for them. When I log in as nwalke, I enter my nwalke password and it succeeds. I'm then greeted with [sudo] password for nick:. If I enter my nwalke password here, it says Sorry, try again.. If I enter nick's password, it says Sorry, user nick is not allowed to execute scriptname as root. If I do groups as nwalke, I see that magically my user has been given the group nick. Now, I accidentally thought that nick had a UID of 100, not 1000. So originally in my smb.conf I had idmap uid 1000-10000. The only thing I can think of, is that I logged in with nwalke while that was still set and now I'm just being presented with a UID of 1000 forcing linux to think I'm nick. I'm not really sure where to go from here. Like I said, I'm fairly certain active directory is communicating with my server properly, but something must not be mapped right on the linux side. Any thoughts? Here is my smb.conf: [global] security = ads netbios name = hostname realm = COMPANY.COM password server = adshost.company.com workgroup = COMPANY idmap uid = 10000-90000 idmap gid = 10000-90000 winbind separator = + winbind enum users = no winbind enum groups = no winbind use default domain = yes template homedir = /home/%D/%U template shell = /bin/bash client use spnego = yes domain master = no load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes Let me know if more information about something is required.

    Read the article

  • autehntication on gui application written on perl

    - by oren
    Its not specific perl question I am building a perl gui/wxperl application that connect to DB . I want my application to be a password protected i.e first the user should enter the user and password and then use the appication . what is the best secure method to store the password could someone provide an idea what is the best method to how should i store the user and the password and how should i retrieve them for authentication ? if possible could someone provide some perl code how to do this ?

    Read the article

  • How to reset mysql's replication settings completely, without reinstalling it?

    - by user38060
    I set up mysql replication by adding references to binlogs, relay logs etc in my.cnf restarted mysql, it worked. I wanted to change it so I deleted all binlog related files including log-bin.index, removed binlog statements from my.cnf restarted server, works set master to '', purge master logs since now(), reset slave, stop slave, stop master. now, to set up replication again, I added binlog statements to the server. But then I hit this problem when restarting with: sudo mysqld (the only way to see mysql's startup errors) I get this error: /usr/sbin/mysqld: File '/etc/mysql/var/log-bin.index' not found (Errcode: 13) Because indeed, this file does not exist! (I deleted it, while trying to set up a new replication system) Hmm, if I change the config line to: log-bin-index = log-bin.index I get a different error: [ERROR] Can't generate a unique log-filename /etc/mysql/var/bin.(1-999) [ERROR] MSYQL_BIN_LOG::open failed to generate new file name. [ERROR] Aborting The first time I set up replication on this system, I didn't need to create this file. I did the same thing - added references to a previously non-existing file, and mysql created it. Same with relay logs, etc. I don't know why mysql insists on trying to read the old folder. Should I just reinstall the whole package again? That seems like overkill. my my.cnf: [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking bind-address = IP key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 myisam-recover = BACKUP table_cache = 64 sort_buffer =64K net_buffer_length =2K query_cache_limit = 1M query_cache_size = 16M slow_query_log_file = /etc/mysql/var/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes expire_logs_days = 10 max_binlog_size = 100M server-id = 3 log-bin = /etc/mysql/var/bin.log log-slave-updates log-bin-index = /etc/mysql/var/log-bin.index log-error = /etc/mysql/var/error.log relay-log = /etc/mysql/var/relay.log relay-log-info-file = /etc/mysql/var/relay-log.info relay-log-index = /etc/mysql/var/relay-log.index auto_increment_increment = 10 auto_increment_offset = 3 master-host = HOST master-user = USER master-password=PWD replicate-do-db = DBNAME collation_server=utf8_unicode_ci character_set_server=utf8 skip-character-set-client-handshake [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash [myisamchk] key_buffer_size = 16M sort_buffer_size = 8M [mysqlhotcopy] interactive-timeout !includedir /etc/mysql/conf.d/ Update: Changing all the /etc/mysql/var/xxx paths in binlog & relay log statements to local has somehow solved the problem. I thought it was apparmor causing it at first, but when I added /etc/mysql/* rw, to apparmor's config and restarted it, it still couldn't read the full path.

    Read the article

  • Bonding: works only from one link

    - by Crazy_Bash
    I would like to install bonding with 4 links. but only one of them is active. eth4 is always active. the others simply don't work. those are my configs: DEVICE="eth2" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth3" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth4" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth5" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE=bond0 IPADDR=<ip> BROADCAST=<ip> NETWORK=<ip> GATEWAY=<ip> NETMASK=<ip> USERCTL=no BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no /etc/modprobe.d/bonding.conf alias bond0 bonding options bond0 mode=4 miimon=100 updelay=200 #downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 Linux: Linux 3.0.0+ #1 SMP Fri Oct 26 07:55:47 EEST 2012 x86_64 x86_64 x86_64 GNU/Linux what i've tried: downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1

    Read the article

  • Having troubles connectiong Magento to external Windows Database Server using Windows Azure

    - by Kevin H
    "I tried to make this easy to read through" I am using Ubuntu 12.04 LTS for Magento and installed these commands onto the system: sudo apt-get install apache2 sudo apt-get install php5 libapache2-mod-php5 sudo apt-get install php5-mysql sudo apt-get install php5-curl php5-mcrypt php5-gd php5-common sudo apt-get install php5-gd I used Windows Server 2008 R2 August 2012 for Mysql Server For a reference, I used http://www.windowsazure.com/en-us/manage/windows/common-tasks/install-mysql/ When the server was setup, I added an empty disk to it Then, I added endpoints 3306 Next I accessed the server remotely After that, I formatted the empty disk and was inserted as F: Next I downloaded Mysql from http://*.mysql.com version Windows (x86, 64-bit), MSI Installer 5.5.28 In the installation process, I used these settings: Typical Setup - Clicked Next, install, next Chose Detailed Configuration - Clicked next Chose Dedicated MySQL Server Machine - Clicked Next Chose Transactional Database Only - Clicked Next Chose the "F:" Drive - Clicked Next Chose Online Transactional Processing (OLTP) - Clicked Next For Networking Options, I checkmarked 'Enable TCP/IP Networking" 'Add firewall exception for this port' 'Enable Strict Mode' - Clicked Next Chose Standard Character Set - Clicked Next For Windows Options, I checkedmarked 'Install as Window Service" 'Launch the MySQL Server automatically' 'Include Bin Directory in Windows PATH - Clicked Next For Security Options, I checkmarked 'Modify Security Settings' and set root password - Clicked Next Finally clicked Execute and Finish These are the Firewall Setting that I set I clicked inbound rules Properties Scope Allow IP Address and used the internal Address for Magento Server Clicked Apply and exited Next, I opened up MySQL 5.x Command Line Client Entered Root Password Then entered these commands mysql create database magento; mysql Create user magentouser identified by 'password'; mysql Grant select, insert, create, alter, update, delete, lock tables on magento.* to magentouser mysql exit Finally, I opened up the Magento Downloader Magento validation has approved all PHP version is right. Your version is 5.3.10-1ubuntu3.4. PHP Extension curl is loaded PHP Extension dom is loaded PHP Extension gd is loaded PHP Extension hash is loaded PHP Extension iconv is loaded PHP Extension mcrypt is loaded PHP Extension pcre is loaded PHP Extension pdo is loaded PHP Extension pdo_mysql is loaded PHP Extension simplexml is loaded These are all installed on Magento Server For the Database Connection, I used: The Database server only has MySQL 5.5 Server installed on it Host - Internal IP address User Name - The User I created when setting up database Password - The Password I created when setting up database For the password, I did some research and found out that Magento only accepts alphanumeric, so I went and set it up again and used only alphanumeric for the User password Now, I am still getting Accessed denied for database Connection. Also, I have tryed to setup mysql on independant Linux Server but kept getting errors. When, I found the solution. Wouldn't work, so I decided to try Windows. These is the questions, I have been asking and researching to debug this issue Is it because I am using Linux for magento and Windows for Database. I have had no luck in finding a reason why this wouldn't work There must be something, I am missing I also researched the difference between linux sql databases and windows sql databases but have not come to conclusion, if installing Mysql on windows would make a difference in syntax and coding. I have spent a lot of time looking into this and need some help with direction on how to complete my project. Any type of help would be appreciated.

    Read the article

  • Win7 + SysPrep + CloneZilla = lost settings

    - by oshirowanen
    I've just cloned a PC (Win7 + SysPrep + CloneZilla) and after starting up the new clone, Win7 wants to be reactivated again and the video driver seems to be missing (as in the aero effect has disappeared from the new clone) and the internet connection settings seem to be missing too. All those were set in the master before running SysPrep. Why have these settings been lost? The master PC was had windows 7 activated using a volume license key, and the clone pc is the same make and model as the master computer.

    Read the article

  • TextField focus on UIAlertView

    - by Nyxem
    Hello, I have a subclass of UIAlertView with 2 UITextField for login / password. My problem is that when I have finished to type my login and change the focus to the password field, there is a cursor on the login field and on the password field, but the focus is on the password field, so my question is, how can I make the cursor disappear on the login field ? Thanks for your help.

    Read the article

  • Excel 2007: Named ranges problems when linking workbooks

    - by Mike
    I've 30+ workbooks each with 5 specific worksheets (formated the same). Each worksheet's data needs to be linked to a master workbook, so that I end up with 5 master workbooks and all the specific data in one long table format $A$2:$I$750. (Are you still with me? ;)) I don't have access to a database, so I'm having to link the sheets to their master workbook directly. I've highlighted the data I need; named the range; and then tried referencing this from my master workbook. I get the #Value error symbol when I try to link (=[WorkbookName]!MyNamedRange) to a cell that doesn't match the top left cell of my range. Example: MyNamedrange is always =$A$2:$I43$ on one specific sheet. On my master workbook it works if it's referenced at A2 but I get #Value if it's referenced A1, or A44. Any ideas? I'm trying to link my data in one continous table so I can run a pivot on it, and other things. Can it be done like this, or should I just copy and paste? I'm trying to keep things 'linked'so I do not need to spend time C&Ping all day. Many thanks Mike.

    Read the article

  • Is there a way to batch create DNS slave zones on a new slave DNS server?

    - by Josh
    I currently have a DNS server which is serving as a master DNS server for a number of our domains. I want to set up a brand new secondary DNS server. Is there any way I can automatically have BIND on the new server act as a secondary for all the domains on the primary server? In case it matters, I have Webmin on the primary server. I believe Webmin has an option to create a zone as a secondary on another server when creating a new master zone on one server, but I don;t know of any way to batch create secondary zones for a number of existing master zones. Maybe I'm missing something. Is there a way to "batch create" DNS slave zones on a brand new slave DNS server for all the DNS zones on an existing master?

    Read the article

  • Coldfusion Components:- The argument passed to the function is not of type numeric

    - by salim.vali
    Hi I have a simple form form.cfm:- <cfset Registr = createObject("component", "forms.Registr") /> <cfset setFoo = createObject('component','forms.Registr).putNUsr(username,password,rating) /> <form name="regFrm" action="#cgi.script_name#" method="post" onsubmit="submitform();" > <tr><td>Username:</td> <td><input type="text" name=" Username" value="#form. Username#" ></td></tr> <tr><td>Password:</td> <td><input class="" type="password" name="password" value="#form.password#" ></td></tr> <tr><td>Rate:</td> <select name="rating" > <option value="" ></option> <cfloop query="qGetReting"> <option value="#rating_id#" <cfif form. rating eq prof_id>selected</cfif> >#rating#</option> </cfloop> </select> </td> </tr> </form> Now there is this cfc called Registr.cfc in the "forms" folder which has an insert-function called 'putNUsr'the code for 'Registr.cfc' is as follows. <cfcomponent> <cffunction name="putNUsr" returntype="void" displayname="" output="no"> <cfargument name="password" type="string" required="true"> <cfargument name="rating" type="numeric" required="true"> <cfargument name="username" type="string" required="true"> <cfquery datasource="#application.xyz#" name="q_putNUsr"> insert into users (username , password , rating) values( <cfqueryparam value="#arguments. username#" cfsqltype="CF_SQL_VARCHAR" />, <cfqueryparam value="#arguments.password#" cfsqltype="CF_SQL_VARCHAR" />, <cfqueryparam value="#arguments.rating#" cfsqltype="CF_SQL_INTEGER" ) </cfquery> </cffunction> </cfcomponent> I am able to populate the DB with the data if I do not use the form field "rating" which is numeric. Else i am getting the error as follows:- The RATING argument passed to the putNUsr function is not of type numeric. If the component name is specified as a type of this argument, it is possible that either a definition file for the component cannot be found or is not accessible. KINDLY HELP -S Vali

    Read the article

  • Import a puppet manifest from the node itself?

    - by bobinabottle
    I have a somewhat unique situation. Our systems team manages our main puppet master, and the development team is fine with everything however they are thinking of using it to control some elements on their desktop machines, whilst still being connected to our central puppet master. Since we don't want the changes they make to go into our puppet master.. is there a way of puppet importing a manifest from the node directly? As in.. on the developer machine, they put a file "/root/development.pp" or something, and then on our puppet master we put something like node { "developermachine": # Do the majority of normal things # import "/root/development.pp" } We have a few different options we can take about security of write access to the puppet manifests, but if puppet were to support something like this it would probably be the cleanest for us. Any help is appreciated :)

    Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >