Search Results

Search found 5643 results on 226 pages for 'machines'.

Page 117/226 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Why is Apple System Image Utility so slow?

  - by Jon Rhoades

  I'm using Apple System Image Utility (SIU) on Snow Leopard 10.6.2 and I am rather disturbed it takes over Three hours to make a Netrestore or Netboot image. I'm using as the donor machine a brand new iMac and as the imaging machine a brand new iMac connected using target disk mode & Firewire 800. The hard drive size and subsequent image is about 8GB. To restore the image over the network takes about 4 minutes. Given that Norton Ghost will take an image in about 5 minutes (or less on newer machines) over USB2, why is the Mac over an order of magnitude slower?

  Read the article

• SSH onto Ubuntu box using RSA keys

  - by jex

  I recently installed OpenSSH on one of my Ubuntu machines and I've been running into problems getting it to use RSA keys. I've generated the RSA key on the client (ssh-keygen), and appended the public key generated to both the /home/jex/.ssh/authorized_keys and /etc/ssh/authorized_keys files on the server. However, when I try to login (ssh -o PreferredAuthorizations=publickey jex@host -v [which forces the use of public key for login]) I get the following output: debug1: Host 'pentheon.local' is known and matches the RSA host key. debug1: Found key in /home/jex/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received Banner message debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/jex/.ssh/id_rsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /home/jex/.ssh/identity debug1: Trying private key: /home/jex/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey,keyboard-interactive). I'm not entirely sure where I've gone wrong. I am willing to post my /etc/ssh/sshd_config if needed.

  Read the article

• One-way forest trust between geographically distributed forests using Server 2008 R2

  - by bwerks

  Hi all, I'm planning out a joinder between two domains, as would take place with contracting companies. Forests A and B exist in distant sites, and there is to be a one-way forest trust so that domain users in Forest A can be authenticated on machines in Forest B. In order to facilitate this, each forest's domain controller must be able to contact each other in order to set up & confirm the trust, but my question is what underlying networking magic must take place beneath it. So far the prevailing approach has been to maintain a VPN connection between the two sites, but the technet documentation seems to indicate that DNS forwarding may be the way to go. Is this the case? Furthermore, if DNS will suffice, does that mean that there must be a server running DNS on boundary servers in each domain so that they can be reached from across the internet? How must they be configured? Thanks!

  Read the article

• Snow Leopard Permissions in Shared Folders reset on saving file

  - by jan

  I have several users who access their accounts on OSX through their windows machines over samba. As soon as they update/save a file, it sets the permissions to -rwxr----- which means no other users can read the files. This affects apache user, for example, so changes to their files under their Sites directory means Apache can no longer serve the pages. I've looked into /etc/smb.conf, /var/db/smb.conf, and /var/db/samba/smb.shares but I can't figure out how to force it to use the parent folders permissions. Thanks in advance.

  Read the article

• Simple, user friendly and strong file encryption in Windows

  - by Adam Matan

  I want a colleague of mine to send me a sensitive MS-Word document via e-mail. Since Word's encryption is questionable, I would like to encrypt the file using a passphrase. Do you know of any user-friendly encryption tool that a novice user can easily use? I wouldn't like to prompt for keys or anything like this - just provide simple interface for single file encryption. EDIT: I have solved this using Putty Secure Copy, through a Linux box I have somewhere. The user downloaded scp to the same directory where the file was, and I have send him the exact scp command by mail. Nice! Another Edit I have some additions (mainly the usage of winscp and perhaps virtual machines). My detailed answer appears below, as requested in comments.

  Read the article

• background copy large files to a laptop?

  - by Roy Pardee

  Hey All, I like to watch windows media center recorded TV files on my laptop in bed. I find thought that when the programs are in HD I have a lot of stuttering and delays--no doubt b/c of the amount of data being transferred. I actually have a fair amount of space on the laptop's hdd, and wouldn't mind moving the files onto that hard drive, where no doubt my problem would go away. But that requires some planning & time for the files to move. Is there a utility out there that would kind of 'trickle' the files over to the laptop over a long period of time, w/out soaking its bandwidth? Something like ms' BITS tech? Both machines are running win7. Many thanks! -Roy

  Read the article

• VPN using Zywall

  - by Rune FS

  I've played around with a certificate based VPN (normally I don't do hardware) we've manged to setup the connection and the tunnel between the routers is working correctly. We now need the last step. There's no connection to the computers on the other end. What could we have forgotten? (we're testing with two standard configured Win7 machines) EDIT: Just to clarify the tunnel is working I can ping the router on the other end. I can't access the computers on the other side of that router and vice versa. (It's also possible to access the remotemangement console of the remote router on the LAN IP)

  Read the article

• write-through RAM disk, or massive caching of file system?

  - by Will

  I have a program that is very heavily hitting the file system, reading and writing randomly to a set of working files. The files total several gigabytes in size, but I can spare the RAM to keep them all mostly in memory. The machines this program runs on are typically Ubuntu Linux boxes. Is there a way to configure the file system to have a very very large cache, and even to cache writes so they hit the disk later? I understand the issues with power loss or such, and am prepared to accept that. Crashing aside, in normal operation the writes should eventually reach the disk! Or is there a way to create a RAM disk that writes-through to real disk?

  Read the article

• An SQLite/STDIN Conundrum, Specific to AIX

  - by mikfreedman

  Hi there! I'm been playing around with SQlite at work, specifically with trying to get the sqlite3 command line tool to accept stdin instead of a file. Sounds easy enough, on linux you can execute a command like: echo 'test' | sqlite3 test.db '.import /dev/stdin test' unfortunately - our machines at work run AIX (5 & 6) and as far as I can tell, there is no equivalent to the virtual file /dev/stdin. I managed to hack together an equivalent command that works on AIX using a temporary file. echo 'test' | cat - > /tmp/blah ; sqlite3 test.db '.import /dev/stdin test' ; rm /tmp/blah Now, does it need to use STDIN? isn't this temporary file thing enough? Probably, but I was hoping someone with better unix-fu had a more elegant solution. note: the data I would like to import is only provided via STDOUT, so that's what the echo 'test' command is all about

  Read the article

• What is the best file system and allocation size for a USB flash drive?

  - by e-t172

  I'm considering using my 4 GB Kingston DataTraveler USB stick to store my Firefox and Thunderbird profiles for my laptop and desktop PCs. I want to maximize performance when using Firefox. The question is: what is the best file system and allocation size for the fastest Firefox profile operation on a USB flash drive? I'm using Windows 7 on both machines and I don't care about compatibility or the drive's lifetime. I just want to maximize performance. I could even use ext2 with the Ext2 IFS driver if that means it'll be faster. I'm assuming (perhaps I'm wrong) that putting a Firefox profile on a USB stick would be a "lots of small files" usage. In that case, it seems that NTFS would perform best, but I'm not sure. Besides I found nothing regarding the best allocation size to use. Considering that the default allocation size is designed for hard drives (which have different characteristics), I'm assuming that the default allocation size is not the best.

  Read the article

• Unique Features of bash compared to zsh

  - by Tim

  I have been a zsh user for quite some time (before that tcsh and before that csh). I am quite happy with it, but was wondering if there are any compelling features of bash that do not exist in zsh. And conversely, are there zsh features which do not exist in bash. My current feel is that bash is better: If you are familiar with it already and don't want to learn new syntax. It is going to exist on most all *nix machines by default, whereas zsh may be an extra install. Not trying to start a religious battle here, which is why I'm just looking for features which exist in only one of the shells.

  Read the article

• IP KVM switch, or serial console box for remote admin?

  - by grahzny

  We have a small server farm (11 now, may add more in the future) of HP Proliant DL160 G6s. They all run either Linux (server only, no X11) or VMware ESX. We had intended to get models with iLO, in case BIOS-level remote admin became an issue, but that didn't happen. I had an IP KVM switch recommended to me (along with some sort of Remote Reboot hardware.) I've since realized that none of our machines need GUI administration, so perhaps a serial console switch would be a cheaper and more appropriate option. Something like this: http://www.kvm-switches-online.com/serimux-cs-32.html Do you folks have an opinions on which way is a better choice? Should we go for the ease of setup (plug and go, instead of turning on the feature in the BIOS and making sure the serial settings are correct) and the flexibility of an IP KVM switch even with the extra cost? Or is a serial console switch just fine?

  Read the article

• Prevent Server Restart after Windows Updates

  - by eidylon

  we have a number of servers in our office, as a small hosting company, and these servers are critical to business, ... web server, mail server, db server, etc. On a semi-regular basis, when the machines get automatic updates, they just automagically reboot themselves in the middle of the night. A number of them have software which must be running on the console session (bad practice, I know, but out of my control). When they reboot themselves, these programs obviously shut down, leaving customers upset and services interrupted. How do you set a Windows Server 2003 R2 machine to NEVER automagically reboot itself after updates? And perhaps, if possible, to instead email someone so that they are aware it needs a pending reboot and can schedule it for the best time? Thanks in advance!

  Read the article

• Mixed network, Linux-to-Linux hostname resolution issues

  - by James

  At work we have an WinSBS domain at the heart of our network, which is all Windows PCs. The domain controller is acting as a DNS for these computers. I have recently added some personal use Linux machines to the network, without joining them to the domain. I have set up Samba with "wins server" pointing to the domain controller, which lets the Windows boxes resolve the Linux hostnames just fine. I also have resolvconf set up with the domain controller as a nameserver and the local domain as a searched domain, which lets the Linux boxes resolve the Windows hostnames just fine. However, the Linux boxes will not resolve other Linux hostnames at all. Given that I don't have control over the DNS server (I am not the network admin) and that at least one of the Linux boxes is not an always-on machine and is likely to change its LAN IP frequently (via DHCP), what service am I missing to make their hostnames visible to each other?

  Read the article

• Ghost Image - windows asks for activation on when deployed to VM

  - by Chris Sobolewski

  I have several images created with Ghost Solution Suite (v11 I believe), the images have been in use for a few years now, but I am finally to the point where I have enough time to attempt to virtualize them for easier updates. I am running VMWare and attempting to image the virtual machines with my ghost image files. For my images I am running sysprep with minisetup and using reseal. The image deploys successfully, however when I start the VM for the first time, it demands windows activation. This doesn't happen when I image a physical computer, even a different model with different hardware. The idea of virtualizing my images becomes rather worthless if I am unable to deploy the images without having to activate every time (especially as Microsoft keeps declaring our volume licence key as invalid for activations). Does anyone know why it is asking for activation on a virtual machine, but not a physical PC? How can I prevent this?

  Read the article

• Recovering OST file without profile

  - by Philippe

  We have a Microsoft Exchange Server 2007 and offer this solution to many customers. Recently, a customer had his personal Exchange server crash (which is what made him our customer). He called some technician to see if he could repair his server before calling us, but this said tech wasn't able to do anything for them. Now that all his mailbox are on our server, he would like to transfer his old emails over to the new profile, but the tech deleted all profiles on the client machines while trying to repair his Exchange server. So my customer still has the OST files but they are not related to any profiles. Is there any way to re-attach them to a profile, or to convert them into PST files that he could then import into his new profile? The only thing I found were third party software that could to the conversion, but I am wondering if Microsoft has any tools that could re-attach the OST to a new profile. I have also tried the scanpst.exe and scanost.exe to no avail. Thank you

  Read the article

• Automatic Remote REGEDIT?

  - by SUPER MARIO BROTHERS

  I've got a lot of computers on the domain here that do not have remote desktop enabled. I can open the command prompt and do this command: REG.exe ADD \\[the machine im doing this to]\HKLM\SYSTEM\CurrentControlSet\ Control\\"Terminal Server" /v fDenyTSConnections /t REG_DWORD /d 0 and it works perfectly fine, except for one thing - it makes a prompt asking if I'm sure I want to do this, Yes/No. How would I go about having a batch file auto-answer YES to this, so I don't have to type it every time? It wouldn't be a problem if it was just a couple hundred machines, but there's plenty more than that and it would take a while to do this by hand. Not to mention I might have to sweep a few times to make sure every computer is turned on and is affected by this.

  Read the article

• remote desktop: the app on the remote machine is confusing the controller's hostname with its own hostname

  - by David Dai

  I have 2 machines A, B, both run Windows OS. A is my work machine, B is a server on which I have already installed SQLServer. Now I want to install another software on B which runs on top of the SQLServer. I remote connect to B from A. Then on the remote desktop, I start the installer, along the installation process, there's a step where I can configure which server to connect to. normally B's hostname is entered automatically to the hostname field. The issue I'm having is, when I get to that step, A's hostname is entered automatically instead of B's, and even if I manually correct it to 'localhost' or '127.0.0.1' or B's hostname, the installer still cannot connect to B's service as if it still try to connect to A. Theoretically, how does this happen? how is this possible?

  Read the article

• FoxPro 2.6 DOS on Windows 7 64-bit

  - by Rolando

  I support a company that has a very old, mission critical, FoxPro for DOS 2.6 (FPD) application. For variuos reasons the company didn't adapt/migrate their app, which, ironically, has been running even better under Windows XP (and 32-bit Win7) because the OS allowed new features like more reliable networking, distributed printing, email integration. Unfortunately for this company, most new machines now come with a 64-bit version of Windows 7, which is incompatible with their FPD app. I know this time the writing is on the wall: the only long-term solution is to migrate their app. But I wonder if anyone can suggest a temporary alternative path, which doesn't involve either: a) downgrade 64-bit Windows to 32-bit, or b) run the app on a virtualized 32-bit XP Thanks! PS: Happy New Year!!!

  Read the article

• FoxPro 2.6 DOS on Windows 7 64-bit

  - by Rolando

  I support a company that has a very old, mission critical, FoxPro for DOS 2.6 (FPD) application. For variuos reasons the company didn't adapt/migrate their app, which, ironically, has been running even better under Windows XP (and 32-bit Win7) because the OS allowed new features like more reliable networking, distributed printing, email integration. Unfortunately for this company, most new machines now come with a 64-bit version of Windows 7, which is incompatible with their FPD app. I know this time the writing is on the wall: the only long-term solution is to migrate their app. But I wonder if anyone can suggest a temporary alternative path, which doesn't involve either: a) downgrade 64-bit Windows to 32-bit, or b) run the app on a virtualized 32-bit XP Thanks! PS: Happy New Year!!!

  Read the article

• SNMPD - passing values in a trap

  - by ethrbunny

  Im trying to create an SNMP setup to monitor 500-1K machines. Each will be joined to the SNMPTRAPD server via a VPN. When the client system sends its messages, it's sending its internal address instead of the VPN address even though the 'trapsync' command is using the VPN. This will be a problem as many of these system will have DHCP addresses based on location so there will be overlap. What I'd like to figure out is how to pass extra values with the trap so I can identify which system a given trap comes from.

  Read the article

• IMAP and Folder Subscriptions

  - by tom

  Hey guys I'm trying to figure out how folder subscriptions work with IMAP Clients and, in my case, in an Exchange 2007 environment. I have managed to deduce, I think correctly, that the folder subscription settings for individuals are stored centrally on the mailbox (At least, having configured 2 profiles on thunderbird, on 2 different machines, they subscribe to the exact same folders and dont display the exact same ones). The point of this being that I have had 2 or 3 different people in the past day report to me that they are having problems subscribing to certain folders, and having certain folder subscriptions remembered (particularly sub-folders). This is across both Thunderbird 2 and 3. can anyone suggest anything? Tom

  Read the article

• Cisco ASA 5505 and slow download speeds for Apple devices

  - by James

  For traffic routing through my ASA 5505, downloads for all Apple devices, including AppleTV iPad gen 1 IMac MacBook Pro are very slow. speedof.me show less than 1 Mbps download (where I should have 20 Mbps +), yet for any Windows-based device, the download speeds are in excess of 20 Mbps. The Windows device, including the iMac and MacBook Pro machines, are connected via ethernet cable. Why are Apple devices experiencing such pain? Is it an ASA setting, or something else? Thanks.

  Read the article

• How to persist changes to instances in the cloud.

  - by Peter NUnn

  Hi folks, I must be missing something here, but can someone clue me in on how to persist changes (such as software installs etc) on machines in the cloud (either EC2 or my own Eucalyptus cloud). I have instances running.. can attach extra disks to them etc., but every time I terminate the instance, all of my changes are lost the next time I run them. Now, this sort of makes sense in that the instances are virtual, but, there must be some way to make these changes persist. I'm just missing how its done. Thanks. Peter.

  Read the article

• Multicast accross the subnets

  - by Hasan Khan

  My application sends some UDP packets on a multicast address. In our office we have 3 subnets connected via routers. Sitting in my subnet I'm able to ping the IP of the other subnet. Will multicast packets cross my subnet and reach the machines of other subnets? Or router will need some configuration? Or do I have to program a bridge for it? Please note that I do not know anything about Networking. Kindly tell me something that I can ask my network admin to do.

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >