Search Results

Search found 3567 results on 143 pages for 'opening'.

Page 117/143 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Programmatically open an email from a POP3 and extract an attachment

  - by Josh

  We have a vendor that sends CSV files as email attachments. These CSV files contain statuses that are imported into our application. I'm trying to automate the process end-to-end, but it currently depends on someone opening an email, saving the attachment to a server share, so the application can use the file. Since I cannot convince the vendor to change their process, such as offering an FTP location or a Web Service, I'm stuck with trying to automate the existing process. Does anyone know of a way to programmatically open an email from a POP3 account and extract an attachment? The preferred solution would reside on a Windows 2003 server, be written VB.NET and secure. The application can reside on the same server as the POP3 server, for example, we could setup the free POP3 server that comes with Windows Server and pull against the mail file stored on the file system. BTW, we are willing to pay for an off-the-shelf solution, if one exists. Note: I did look at this question but the answer points to a CodeProject solution that doesn't deal with attachments.

  Read the article

• Can't create new xib files in Xcode projects

  - by Reed Olsen

  This one is a doozy... My buddy just downloaded the iPhone SDK on his Snow Leopard MacBook Pro. No matter what kind of project he creates (Window Based, View Based, etc...,) he can't create or use his own xib files. The project will compile and run fine until he adds a new xib file. Here are some symptoms: When he selects a pre-generated xib in Xcode (such as MainWindow.xib), no preview is shown on the right hand side. Double clicking on this file will open it in interface builder (This is correct behavior). When he selects his own custom xib, the preview pane displays the XML content of the xib. Double clicking on his custom xib opens up the XML file in Xcode - as if it were a standard code file (This is jacked up). Opening his custom xib from finder opens it in Interface Builder. When building the application, the build warning says something to the effect of "Warning: No rule to process file /path/to/CustomXib of type sourcecode.xib for architecture i386" At runtime he gets the error: Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[UIViewController _loadViewFromNibNamed:bundle:] was unable to load a nib named "MyCustomXib"' We've uninstalled Xcode from the command line and reinstalled. I've verified that it's the right version for his machine. I'm stumped!

  Read the article

• Two-way data binding of controls in a user control inside a FormView

  - by Sandor Drieënhuizen

  I'm trying to perform two-way data binding on the controls in my user control, which is hosted inside a FormView template. FormView: <asp:ObjectDataSource runat="server" ID="ObjectDataSource" TypeName="WebApplication1.Data" SelectMethod="GetItem" UpdateMethod="UpdateItem"> </asp:ObjectDataSource> <asp:FormView runat="server" ID="FormView"> <ItemTemplate> <uc:WebUserControl1 runat="server"></uc:WebUserControl1> </ItemTemplate> <EditItemTemplate> <uc:WebUserControl1 runat="server"></uc:WebUserControl1> </EditItemTemplate> </asp:FormView> User control: <%@ Control Language="C#" ... %> <asp:TextBox runat="server" ID="TitleTextBox" Text='<%# Bind("Title") %>'> </asp:TextBox> The binding works fine when the FormView is in View mode but when I switch to Edit mode, upon calling UpdateItem on the FormView, the bindings are lost. I know this because the FormView tries to call an update method on the ObjectDataSource that does not have an argument called 'Title'. I tried to solve this by implementing IBindableTemplate to load the controls that are inside my user control, directly into the templates (just like I had entered them declaratively like in the code above). However, when calling UpdateItem in edit mode, the container that gets passed into the ExtractValues method of the template, does not contain the TextBox anymore. It did in view mode! I have found some questions on SO that relate to this problem but they are rather dated and don't provide straight forward answers. How do you think I could solve this problem? It seems to be such a simple requirement but apparently it's more like opening a can of worms...

  Read the article

• Facebook IOS SDK: Error in Publish Story Dialog

  - by lividsquirrel

  I've successfully set up the "DemoApp" project from the Facebook IOS SDK to use my "OKC ThunderCast" Facebook application. I have also configured another "Tester" application from scratch to successfully use the Facebook SDK and publish stories to my news feed. However, in my production application, I always get this result when calling the "dialog" method. The full description of the error message is "Error on line 52 at column 17: Opening and ending tag mismatch: div line 0 and body" Here's a detailed walkthrough of all of my code to make sure nothing is missed. 1) A UIViewController calls the "authorize" method NSArray *fbPerms = [NSArray arrayWithObjects:@"read_stream", @"offline_access", nil]; [[FacebookSingleton sharedInstance].facebook authorize:fbPerms delegate:self]; Note: The FacebookSingleton is a class I wrote that always returns a single instance of the "Facebook" class. I am using it successfully in other applications. 2) Safari is opened and the user is successfully authenticated and authorized 3) The application is called back and the "handleOpenUrl" method is called, which calls the "fbDidLogin" method of the UIViewController - (BOOL)application:(UIApplication *)application handleOpenURL:(NSURL *)url { Facebook *fb = [FacebookSingleton sharedInstance].facebook; return [fb handleOpenURL:url]; } 4) The same UIViewController handles the "fbDidLogin" event, and calls the "dialog" method - (void)fbDidLogin { [[FacebookSingleton sharedInstance].facebook dialog:@"feed" andDelegate:self]; } I also have the necessary "URL Schemes" and "URL Types" entries in the .plist file. To my eyes, I am using exactly the same code in the "DemoApp", "Tester", and production applications. But while the DemoApp and Tester work, I always see this HTML error in the feed dialog in my production application. Has anyone seen a similar issue? Could it be related to the Facebook "Bundle ID" setting in the Facebook application settings? Is there some build or .plist setting that is different? I have invested a great deal of time into troubleshooting with no success in several weeks. Thanks in advance...

  Read the article

• How can I open VLC via browser with PHP (Mac OS X)

  - by Damiqib

  I'm trying to open VLC via browser and make it instantly play the given video file on Mac OS X. This runs on my local server and is only meant to run locally - therefore I already run apache (MAMP) with my username and with group "staff" (defined in httpd.conf). YES - I do know that VLC has http interface - however that is not what I need, so do not suggest that... My current system works without any problems when I run it via Terminal: php /var/www/Movies/index.php - This leads to VLC opening and video starts playing fullscreen like intented. Problems start when I run the same PHP-page with browser. Then the VLC-process starts, but there's no GUI for it, video file won't start playing and the VLC-process takes nearly 100% of CPU. Both; terminal and browser started VLC-processes run with the same user (mine) Both have "Parent process" bash VLC-process begun with Terminal has empty "Process group" (only process id-number) and browser started has "httpd" + (id-number) VLC-process started via browser makes 1000-times more "Mach System Calls" than it's Terminal-started counterpart. Could anyone give me any pointers on how to get this thing working? index.php # $j is a file path to the videofile and is defined before exec('/var/www/Movies/vlc.sh "' . $j . '" > /dev/null 2>&1 & echo $!;'); # If I do this in the given PHP-page it tells me that apache is running # with my username and with the group "staff" like it should be... exec('whoamI'); vlc.sh #!/bin/bash # Activate VLC in 5 seconds to make it the front-most window (sleep 5; open -a VLC) & # Open video file /Applications/VLC.app/Contents/MacOS/VLC --quiet --fullscreen "$1"

  Read the article

• HttpURLConnection inside a loop

  - by Carlos Garces

  Hi! I'm trying to connect to one URL that I know that exist but I don't know when. I don't have access to this server so I can't change anything to receive a event. The actual code is this. URL url = new URL(urlName); for(int j = 0 ; j< POOLING && disconnected; j++){ HttpURLConnection connection = (HttpURLConnection) url.openConnection(); int status = connection.getResponseCode(); if(status == HttpURLConnection.HTTP_OK || status == HttpURLConnection.HTTP_NOT_MODIFIED){ //Some work }else{ //wait 3s Thread.sleep(3000); } } Java not is my best skill and I'm not sure if this code is good from the point of view of performance. I'm opening a new connection every 3 seconds? or the connection is reused? If I call to disconnect() I ensure that no new connections are open in the loop, but... it will impact in performance?. Suggestions? What is the fast/best ways to know it a URL exist?

  Read the article

• MS Access form_current() firing multiple times

  - by Eric G

  I have a form with two subforms (on separate tab pages). It's an MDB project in Access 2003. When it initially opens, Form_Current on the active subform fires once, as it should. But when you move to another record (ie. from the main form), it fires Form_Current on the active subform 4 times. Then subsequent record-moves result in Form_Current firing 2 times. This is a pain, because the subforms have a lot of fields that get moved and/or hidden and so it jumps around for every Form_Current, not to mention being slow. I am opening the form with a filter via DoCmd.OpenForm (actually it sends the filter in via OpenArgs). FilterOn is only set once, in Form_Open on the main form, never in the subforms. Form_Current is not called explicitly anywhere else in the code. When I look at the call stack when Form_Current fires moving the first time, it looks like: my_subform.Form_Current [<Debug Window>] my_subform.Form_Current So it seems like something in Form_Current is triggering another Form_Current event. But only on the first record move. The code in Form_Current is somewhat complex, involving custom classes and event callbacks, but generally does not touch the table data. The only thing I can think might be triggering a Form_Current is that it checks OldValue on form controls - could this be causing it? Or anything else come to mind? Thanks. Eric

  Read the article

• How does one decrypt a PDF with an owner password, but no user password?

  - by Tony Meyer

  Although the PDF specification is available from Adobe, it's not exactly the simplest document to read through. PDF allows documents to be encrypted so that either a user password and/or an owner password is required to do various things with the document (display, print, etc). A common use is to lock a PDF so that end users can read it without entering any password, but a password is required to do anything else. I'm trying to parse PDFs that are locked in this way (to get the same privileges as you would get opening them in any reader). Using an empty string as the user password doesn't work, but it seems (section 3.5.2 of the spec) that there has to be a user password to create the hash for the admin password. What I would like is either an explanation of how to do this, or any code that I can read (ideally Python, C, or C++, but anything readable will do) that does this so that I can understand what I'm meant to be doing. Standalone code, rather than reading through (e.g.) the gsview source, would be best.

  Read the article

• Redeclared javascript global variable overrides old value in IE

  - by Yousuf Haider

  (creating a separate question after comments on this: http://stackoverflow.com/questions/2634410/javascript-redeclared-global-variable-overrides-old-value) I am creating a globally scoped variable using the square bracket notation and assigning it a value inside an external js file. In another js file I declare a var with the same name as the one I just created above. Note I am not assigning a value. Since this is a redeclaration of the same variable the old value should not be overriden as described here: http://www.w3schools.com/js/js_variables.asp Create 2 javascript files with the following content : Script1 //create global variable with square bracket notation window['y'] = 'old'; Script2 //redeclaration of the same variable var y; if (!y) y = 'new'; alert(y); //shows New instead of Old in IE Include these 2 files in your html file <html> <head></head> <body> <script type="text/javascript" src="my.js"></script> <script type="text/javascript" src="my2.js"></script> </body> </html> Opening this page in Firefox and Chrome alerts 'old' which is the expected behavior. However in IE 8 the page will actually alert 'new' Any ideas on why this happens on IE ?

  Read the article

• How do I read binary C++ protobuf data using Python protobuf?

  - by nbolton

  The Python version of Google protobuf gives us only: SerializeAsString() Where as the C++ version gives us both: SerializeToArray(...) SerializeAsString() We're writing to our C++ file in binary format, and we'd like to keep it this way. That said, is there a way of reading the binary data into Python and parsing it as if it were a string? Is this the correct way of doing it? binary = get_binary_data() binary_size = get_binary_size() string = None for i in range(len(binary_size)): string += i message = new MyMessage() message.ParseFromString(string) Update: Here's a new example, and a problem: message_length = 512 file = open('foobars.bin', 'rb') eof = False while not eof: data = file.read(message_length) eof = not data if not eof: foo_bar = FooBar() foo_bar.ParseFromString(data) When we get to the foo_bar.ParseFromString(data) line, I get this error: Exception Type: DecodeError Exception Value: Too many bytes when decoding varint. Update 2: It turns out, that the padding on the binary data was throwing protobuf off; too many bytes were being sent in, as the message suggests (in this case it was referring to the padding). This padding comes from using the C++ protobuf function, SerializeToArray on a fixed-length buffer. To eliminate this, I have used this temproary code: message_length = 512 file = open('foobars.bin', 'rb') eof = False while not eof: data = file.read(message_length) eof = not data string = '' for i in range(0, len(data)): byte = data[i] if byte != '\xcc': # yuck! string += data[i] if not eof: foo_bar = FooBar() foo_bar.ParseFromString(string) There is a design flaw here I think. I will re-implement my C++ code so that it writes variable length arrays to the binary file. As advised by the protobuf documentation, I will prefix each message with it's binary size so that I know how much to read when I'm opening the file with Python.

  Read the article

• php file force download

  - by droidus

  When I use this code to download this image (only used for testing purposes), I open the downloaded image, and all it gives me is an error. i tried it in chrome. opening it with windows photo viewer, it says that it can't display the picture because it is empty??? here is the code: <?PHP // Define the path to file $file = 'http://www.media.lonelyplanet.com/lpi/12553/12553-11/469x264.jpg'; if(!file) { // File doesn't exist, output error die('file not found'); } else { header('Content-Description: File Transfer'); header('Content-Type: application/octet-stream'); header('Content-Disposition: attachment; filename='.basename($file)); header('Content-Transfer-Encoding: binary'); header('Expires: 0'); header('Cache-Control: must-revalidate, post-check=0, pre-check=0'); header('Pragma: public'); header('Content-Length: ' . filesize($file)); ob_clean(); flush(); readfile($file); exit; } ?>

  Read the article

• Assigning Javascript click callbacks to Flash elements?

  - by Wes

  Bear in mind I'm a web developer but not a Flash developer and know little about Flash. I work with people who are the opposite and know very little about web development. Maybe someone who is good with both can answer this question? I work for an Advertisement software company and we are having fits with our Ad click-throughs opening tabs vs popups in different browsers. Tabs are preferred becaus pop-ups are subject to blockers. I read that tabs will always be opened if it is a callback triggered by a user click. This is fine with me. Problem is the Flash developers, using their external interface, are trying to open the new window when the Flash ad gets clicked themselves. So even though it's user initiated Flash behooves upon itself to open the website. I think this may be why they end up being popups instead of new tabs. Is there a way external to Flash using Javascript to assign the click events to Flash elements so that only new tabs will ever be opened by clicking the Flash element? Or a way through Flash can assign Javascript callbacks to its elements? Thanks!

  Read the article

• Any HTTP proxies with explicit, configurable support for request/response buffering and delayed conn

  - by Carlos Carrasco

  When dealing with mobile clients it is very common to have multisecond delays during the transmission of HTTP requests. If you are serving pages or services out of a prefork Apache the child processes will be tied up for seconds serving a single mobile client, even if your app server logic is done in 5ms. I am looking for a HTTP server, balancer or proxy server that supports the following: A request arrives to the proxy. The proxy starts buffering in RAM or in disk the request, including headers and POST/PUT bodies. The proxy DOES NOT open a connection to the backend server. This is probably the most important part. The proxy server stops buffering the request when: A size limit has been reached (say, 4KB), or The request has been received completely, headers and body Only now, with (part of) the request in memory, a connection is opened to the backend and the request is relayed. The backend sends back the response. Again the proxy server starts buffering it immediately (up to a more generous size, say 64KB.) Since the proxy has a big enough buffer the backend response is stored completely in the proxy server in a matter of miliseconds, and the backend process/thread is free to process more requests. The backend connection is immediately closed. The proxy sends back the response to the mobile client, as fast or as slow as it is capable of, without having a connection to the backend tying up resources. I am fairly sure you can do 4-6 with Squid, and nginx appears to support 1-3 (and looks like fairly unique in this respect). My question is: is there any proxy server that empathizes these buffering and not-opening-connections-until-ready capabilities? Maybe there is just a bit of Apache config-fu that makes this buffering behaviour trivial? Any of them that it is not a dinosaur like Squid and that supports a lean single-process, asynchronous, event-based execution model? (Siderant: I would be using nginx but it doesn't support chunked POST bodies, making it useless for serving stuff to mobile clients. Yes cheap 50$ handsets love chunked POSTs... sigh)

  Read the article

• Autocompleting \cite{} with emacs + auctex gives "cite: no such database entry"

  - by Alejandro Weinstein

  Hi: I am running Emacs 23.1.1 and AucTeX 11.85 in an Ubuntu 8.10 machine. After opening a tex file, the first time I try to use the autocompletion of the \cite{} command, I get "cite: info not available, use `C-c &' to get it." in the minibuffer. After doing the 'C-c &', I get "byte-code: No BibTeX entry with citation key". Subsequent calls to \cite gives me the message "cite: no such database entry" . I have a \bibliography{library} in my tex file, and the \cite{} entries that I did manually work as expected. I have the following in my .emacs (require 'reftex) (setq-default TeX-master nil) (add-hook 'LaTeX-mode-hook 'TeX-PDF-mode) ;turn on pdf-mode. AUCTeX ;will call pdflatex to ;compile instead of latex. (add-hook 'LaTeX-mode-hook 'LaTeX-math-mode) ;turn on math-mode by ;default (add-hook 'LaTeX-mode-hook 'reftex-mode) ;turn on REFTeX mode by ;default (add-hook 'LaTeX-mode-hook 'flyspell-mode) ;turn on flyspell mode by ;default (setq reftex-plug-into-AUCTeX t) (setq TeX-auto-save t) (setq TeX-save-query nil) (setq TeX-parse-self t) (setq-default TeX-master nil) I also tried the suggestions in http://stackoverflow.com/questions/2699017/suggestion-for-cite-in-emacs-with-auctex, but it didn't work either. Alejandro.

  Read the article

• How do I find out what process Id and thread id / name has a file open

  - by peter

  Hi All, I am using C# in an application and am having some problems with a file becoming locked. The piece of code does this, while (true) { Read a packet from a socket (with data in it to add to the file) Open a file Writes data to it Close a file } But in the process the file becomes locked. I don't really understand how, we are are definately catching and reporting exceptions so I don't see how the file doesn't get closed every time. My best guess is that something else is opening the file, but I want to prove it. Can someone please provide a piece of code to check whether the file is open and if so report what processid and threadid has the file open. For example if I had this code, StreamWriter streamWriter1 = new StreamWriter(@"c:\logs\test.txt"); streamWriter1.WriteLine("Test"); // code to check for locks?? StreamWriter streamWriter2 = new StreamWriter(@"c:\logs\test.txt"); streamWriter1.Close(); streamWriter2.Close(); That will throw an exception because the file is locked when we try and open it the second time. So where the comment is what could I put in there to report that the current app (process Id) and the current thread (thread Id) have the file locked? Thanks.

  Read the article

• Getting "" at the beginning of my XML File after save()

  - by Remy

  I'm opening an existing XML file with c# and I replace some nodes in there. All works fine. Just after I save it, I get the following characters at the beginning of the file:  (EF BB BF in HEX) The whole first line: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> The rest of the file looks like a normal XML file. The simplified code is here: XmlDocument doc = new XmlDocument(); doc.Load(xmlSourceFile); XmlNode translation = doc.SelectSingleNode("//trans-unit[@id='127']"); translation.InnerText = "testing"; doc.Save(xmlTranslatedFile); I'm using a C# WinForm Application. With .NET 4.0. Any ideas? Why would it do that? Can we disable that somehow? It's for Adobe InCopy and it does not open it like this. UPDATE: Alternative Solution: Saving it with the XmlTextWriter works too: XmlTextWriter writer = new XmlTextWriter(inCopyFilename, null); doc.Save(writer);

  Read the article

• Tracing spoofed mobile phone numbers

  - by RaDeuX

  I am being harassed by some prank caller that is spoofing his/her number neither T-Mobile nor the police can do anything about it. I have been told from one of my friends that if I set up an Asterisk server, I can accomplish the tracing of the prank caller. I am hardly knowledgeable in terms of networking, so a lot of what they told me was filled with jargon I couldn't really understand. But first things first, I downloaded Asterisk 1.5.0 and was finally able to install it (had issues with partitioning... In the end I just had Asterisk hog the entire HDD space). I tried out Asterisk, and it was slightly complicated for me so I decided to install trixbox 2.8.0.4 instead. It looks very similar to Asterisk... I'm not entirely sure what to do from here. I know I have to get the server up and running, but do I need a PBX card or something to accomplish what I'm trying to do? I'm running trixbox on a laptop to minimize electricity usage. Also, will I have to open any ports for the server? I have limited administrative permissions because of my father who is very uncomfortable with opening ports.

  Read the article

• Does somebody know something about Flash-CS5' "multiple copies" bug?

  - by Slav

  I'm, generally, complaining, not asking, but if somebody will be able (Adobe isn't) to help - it will be perfect. I use Flash-CS5 IDE to compose .swc files to import it, then, into FlashDevelop. Evetyrhing works fine until SOMETIMES. About each 10th "Ctrl+S" (save) click Flash-CS5 duplicates ALL images (loaded .bmp, .jpg, .png... files) and names them like "Copy ..." where "..." is incrementing number. Furhtermore, Flash-CS5 creates duplications of some layers - other layers have duplications of items which put on them. Restoring project's state to previous (not copied) state - is the hell. This bug is not reproducible but it happens each 2 hours or so - both right after project's opening and after several hours of work. It happens on different machines - I know at least 5 people which told me that they also run into this issue and do not know how to escape it. Did somebody experienced it? Does somebody know how to handle it?

  Read the article

• Jquery Cluetip - clean up between ajax loaded content

  - by ted776

  Hi, I'm using the jquery cluetip plugin and trying to figure out how to remove any open cluetip dialogs once i load new content via ajax. I am either stuck with the dialog boxes still showing on top of new content, or the ways i've tried to fix this actually remove all future cluetip dialogs from showing at all. Here's my code, thanks for any help. On dom ready i instantiate cluetip as below. //activate cluetip $('a.jTip').cluetip({ attribute: 'href', cluetipClass: 'jtip', arrows: true, activation: 'click', ajaxCache: false, dropShadow: true, sticky: true, mouseOutClose: false, closePosition: 'title' }); When i'm loading new content, I have the following code. The problem i have is that $('.cluetip-jtip').empty() prevents dialog boxes from opening on any of the new content loaded in, while the destroy function doesn't remove any open dialog boxes, but just destroys the current object. $('.next a').live("click", function(){ var toLoad = $(this).attr('href'); var $data = $('#main_body #content'); $.validationEngine.closePrompt('body'); //close any validation messages $data.fadeOut('fast', function(){ $data.load(toLoad, function(){ $data.animate({ opacity: 'show' }, 'fast'); //reinitialise datepicker and toolip $(".date").date_input(); //JT_init(); $('.hidden').hide(); //scroll to top of form $("html,body").animate({ "scrollTop": $('#content').offset().top + "px" }); //remove existing instance //$('a.jTip').cluetip('destroy'); //remove any opened popups $('.cluetip-jtip').empty(); //reinitialise cluetip $('a.jTip').cluetip({ attribute: 'href', cluetipClass: 'jtip', arrows: true, activation: 'click', ajaxCache: false, dropShadow: true, sticky: true, mouseOutClose: false, closePosition: 'title' }); }); }); return false; });

  Read the article

• Directly accessing the modem in Windows Mobile

  - by kigurai

  For some reasons I need to be able to access the internal modem of a Windows Mobile smartphone (a HTC s740 with WM version 6.1). What I want is to be able to access it like it was a serial port in order to give AT-commands. I have code that uses the TAPI Line interface and lineGetID() to get a "handle" on which I shuld be able to do ReadFile()/WriteFile(). Sadly I have not gotten it to work. What I do currently is: Initialize TAPI with lineInitializeEx() Open the Line with lineOpen() Iterate through each available device and get info. Currently I am selecting the "UNIMODEM"/"Hayes compatible on COM1" device. But maybe I should choose the "TAPI cellular service"/"Cellular Line" instead? I have tried the "Cellular Line" device with the same result. Use lineGetID() on the selected device to get a handle. Do WriteFile("AT\r") and then directly do a ReadFile(), which should give me a "OK" back if it really was the modem I accessed. Realize that it doesn't work and get annoyed... But this has so far been a no-go. Does anyone have any idea on how to do it? I am doing this in Native WIN32 C++ on Windows Mobile 6 SDK. UPDATE: I have so far managed to get a data connection between two phones using RIL, which gives me a serial port handle to write and read from. BUT, I still would like to be able to interact directly with the modem to send AT-commands. So, the bounty I am starting only concerns getting direct access to the modem in order to give AT-commands. My investigations so far indicates that this was possible in previous versions of Windows Mobile (by opening COM2 and/or COM9 and slaying RIL, or something like that) but I have not yet seen code which works on WM6.

  Read the article

• Java and .net interoperability

  - by dineshrekula

  I have a c# program through which i am opening cmd window as a a process. in this command window i am running a batch file. i am redirecting the output of that batch file commands to a Text File. When i run my application everything seems to be ok. But few times, Application is giving some error like "Can't access the file. it's being used by another application" at the same time cmd window is not getting closed. If we close the cmd process through the Task Manager, then it's writing the content to the file and getting closed. Even though i closed the cmd process, still file handle is not getting released. so that i am not able to run the application next time onwards.Always it's saying Can't access the file. Only after restarting the system, it's working. Here is my code: Process objProcess = new Process(); ProcessStartInfo objProInfo = new ProcessStartInfo(); objProInfo.WindowStyle = ProcessWindowStyle.Maximized; objProInfo.UseShellExecute = true; objProInfo.FileName = "Batch file path" objProInfo.Arguments = "Some Arguments"; if (Directory.Exists(strOutputPath) == false) { Directory.CreateDirectory(strOutputPath); } objProInfo.CreateNoWindow = false; objProcess.StartInfo = objProInfo; objProcess.Start(); objProcess.WaitForExit(); test.bat: java classname argument > output.txt Here is my question: I am not able to trace where the problem is.. How we can see the process which holding handle on ant file. Is there any suggestions for Java and .net interoperability

  Read the article

• Include error in writing html file from php

  - by Grozav Alex Ioan

  I seem to have some problem with my code here. It creates a file from the php file, but I get an error on the include path. include('../include/config.php'); $name = ($_GET['createname']) ? $_GET['createname'] : $_POST['createname']; function buildhtml($strphpfile, $strhtmlfile) { ob_start(); include($strphpfile); $data = ob_get_contents(); $fp = fopen ($strhtmlfile, "w"); fwrite($fp, $data); fclose($fp); ob_end_clean(); } buildhtml('portfolio.php?name='.$name, "../gallery/".$name.".html"); The problem seems to be here: 'portfolio.php?name='.$name Any way I can replace this, and still send the variable over? Here's the error I get when I put ?name after the php extension: Warning: include(portfolio.php?name=hyundai) [function.include]: failed to open stream: No such file or directory in D:\Projects\Metro Web\Coding\admin\create.php on line 15 Warning: include(portfolio.php?name=hyundai) [function.include]: failed to open stream: No such file or directory in D:\Projects\Metro Web\Coding\admin\create.php on line 15 Warning: include() [function.include]: Failed opening 'portfolio.php?name=hyundai' for inclusion (include_path='.;C:\php\pear') in D:\Projects\Metro Web\Coding\admin\create.php on line 15

  Read the article

• tinymce and jquery

  - by tirso

  hi to all I am using tinymce and simple modal (jquery plugin). Initially, it was not worked (meaning I cannot type in the textarea) for the second or more opening modal dialog unless I refreshed the page. Now I changed my code and now I could type but the problem persist is the submit button doesn't work anymore. I tried to trace in firebug and I found some errors like this Thanks in advance Permission denied to get property XULElement.accessibleType [Break on this error] var tinymce={majorVersion:"3",minorVersi...hanged();return true}return false})})(); here is the revised code $(document).ready(function() { $('.basic').click(function (e) { e.preventDefault(); $('#basic-modal-content').modal({onShow: function (dialog) { tinyMCE.init({ // General options mode : "textareas", theme : "advanced", setup : function (ed) { ed.onKeyPress.add( function (ed, evt) { var y = tinyMCE.get('test').getContent(); $('#rem_char').html(100 - y.length); if (y.length == 100){ //ed.getWin().document.body.innerHTML = y.substring(0,100); alert("Your element has exceeded the 100 character limit. If you add anymore text it may be truncated when saved.") return; } } ); }, plugins : "safari,pagebreak,style,layer,table,save,advhr,advimage,advlink,emotions,iespell,inlinepopups,insertdatetime,preview,media,searchreplace,print,contextmenu,paste,directionality,fullscreen,noneditable,visualchars,nonbreaking,xhtmlxtras,template,wordcount", // Theme options theme_advanced_buttons1 : "bold,italic,underline,strikethrough,|,justifyleft,justifycenter,justifyright,justifyfull", theme_advanced_buttons2 : "fontselect,fontsizeselect,bullist,numlist,forecolor,backcolor", theme_advanced_buttons3 : "", theme_advanced_toolbar_location : "top", theme_advanced_toolbar_align : "left", dialog_type : "modal" }); return false; }}); }); $('.close').click(function (e) { e.preventDefault(); $.modal.close(); }); });

  Read the article

• error wordpress, adjusted sidebar.php to show latest 10 posts

  - by Andy

  Hi, I'm trying to edit my sidebar.php file in my current them WP is using to display the last # of posts (only the titles) as links. I tried using the example of http://codex.wordpress.org/Integrating_WordPress_with_Your_Website but I always get the error on the line that states where the file wp-blog-header can be found. the error when opening the index blog page where the sidebar should be shown: // Get the last 3 posts. Warning: require(/blog/folder/wp-blog-header.php) [function.require]: failed to open stream: No such file or directory in /blog/folder/wp-content/themes/default/sidebar.php on line 7 So what is wrong? Is there a way to permanently embed a function in my html template page that retrieves the latest few posts everytime an article is displayed on the template page? the code: <?php require('/the/path/to/your/wp-blog-header.php'); ?> <?php $posts = get_posts('numberposts=10&order=ASC&orderby=post_title'); foreach ($posts as $post) : start_wp(); ?> <?php the_title(); ?> <?php the_excerpt(); ?> <?php endforeach; ?>

  Read the article

• SQL: script to create country, state tables

  - by pcampbell

  Consider writing an application that requires registration for an entity, and the schema has been defined to require the country, state/prov/county data to be normalized. This is fairly typical stuff here. Naming also is important to reflect. Each country has a different name for this entity: USA = states Australia = states + territories Canada = provinces + territories Mexico = states Brazil = states Sweden = provinces UK = counties, principalities, and perhaps more! Most times when approaching this problem, I have to scratch together a list of good countries, and the states/prov/counties of each. The app may be concerned with a few countries and not others. The process is full of pain. It typically involves one of two approaches: opening up some previous DB and creating a CREATE script based on those tables. Run that script in the context of the new system. creating a DTS package from database1 to database2, with all the DDL and data included in the transfer. My goal now is to script the creation and insert of the countries that I'd be concerned with in the app of the day. When I want to roll out Countries X/Y/Z, I'll open CountryX.sql, and load its states into the ProvState table. Question: do you have a set of scripts in your toolset to create schema and data for countries and state/province/county? If so, would you share your scripts here? (U.K. citizens, please feel free to correct me by way of a comment in the use of counties.)

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >