Search Results

Search found 5121 results on 205 pages for 'dotnetnuke connections'.

Page 118/205 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• where are user name and pasword saved in windows native vpn connection?

  - by Tîrêj

  I am using time freeze program but I can not save my free vpn user name and pasword. Since user name and pasword changed daily I have to unfreeze change pasword then freeze again. In the time freeze there is option to excusing file and folder. if I find the location of vpn setting that save the user name and pasword, I will have ability to use without unfreezing and re freezing. There is a location with path %userprofile%\AppData\Roaming\Microsoft\Network\Connections\Pbk\ that contain vpn configurations except user name and password. I need the location that store user name and password.

  Read the article

• need for tcp fine-tuning on heavily used proxy server

  - by Vijay Gharge

  Hi all, I am using squid like Internet proxy server on RHEL 4 update 6 & 8 with quite heavy load i.e. 8k established connections during peak hour. Without depending much on application provider's expertise I want to achieve maximum o/p from linux. W.r.t. that I have certain questions as following: How to find out if there is scope for further tcp fine-tuning (without exhausting available resources) as the benchmark values given by vendor looks poor! Is there any parameter value that is available from OS / network stack that will show me the results. If at all there is scope, how shall I identify & configure OS tcp stack parameters i.e. using sysctl or any specific parameter Post tuning how shall I clearly measure performance enhancement / degradation ?

  Read the article

• Windows Xp, Svchost.exe connecting to different ips with remote port 445

  - by Coll911

  Im using Windows Xp professional Sp2 Whenever i start my windows, svchost.exe starts connecting to all the possible ips on lan like from 192.168.1.2 to 192.168.1.200 The local port ranges from 1000-1099 and the remote port being 445. After its done with the local ips, it starts connecting to other random ips. I tried blocking connections to the port 445 using the local security polices but it didn't work Is there any possible way i could prevent svchost from connecting to these ips without involving any firewall installed ? since my pc slows down due to the load I'd be thankful for any advices

  Read the article

• Automatically send a string when opening a raw connection in putty

  - by MBraedley

  I have a program running on a server that accepts TCP/IP connections on a specified port. When a connection is made, this program waits for the user (i.e. me) to send a string which identifies the type of user. Once the user identifies themselves, the program will start sending data that is relevant to that user type. I want to automate the first step and have putty automatically send the user identification string once the connection is made. I've been through the settings, and can't seem to find anything like "send following commands on connection". Any help would be appreciated.

  Read the article

• How to find malicious IPs?

  - by alfish

  Cacti shows irregular and pretty steady high bandwidth to my server (40x the normal) so I guess the server is udnder some sort of DDoS attack. The incoming bandwidth has not paralyzed my server, but of course consuming the bandwidth and affects performance so I am keen to figure out the possible culprits IPs add them to my deny list or otherwise counter them. When I run: netstat -ntu | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n I get a long list of IPs with up to 400 connections each. I checked the most numerous occurring IPs but they come from my CDN. So I am wondering what is the best way to help monitor the requests that each IP make in order to pinpoint the malicious ones. I am using Ubuntu server. Thanks

  Read the article

• Error when I try to connect to a SQL Server 2005 from the internet

  - by Manish

  My SQL Server is on a local machine. I want to access it through internet. I created a website through I want to connect local SQL Server 2005. This is the error message: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Thanks for a reply!

  Read the article

• What are good and bad jitter times for a LAN

  - by garyb32234234

  Ive just ran jperf (frontend to iperf) on our network between 2 workstations, its recorded jitter between 0.033ms and 0.048ms. Is this good or bad? Are there more variables that i would need to consider to make the decision? EDIT: TCP/IP Ethernet LAN 43 PCs 1 server, 100Mbits main switch, various small 8 port switches, test was done using UDP, Its a Windows Domain. I want to instal a few voip softphones on the workstations, see how many i can use that reliably work, im testing a few different workstations around the network to see where the best quality network paths are. Will also change some equipment if i identify bad connections.

  Read the article

• Using a Dell PowerConnect to set up load balancing/redundancy, 1 switch 2 routres 2 private wan link

  - by MarianoC

  Hi, We have different locations connected by two different WAN providers. Each site has a dell powerConnect 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and load balance and support redundancy, if one of the routes fail. Is this possible?. We can't find any samples on doing this and we have tried with no success. Any help or link to documentation regarding this, will be greatly appreciated. Thanks, MarianoC

  Read the article

• %sessionname% returns incorrect session name

  - by Samuel Walker

  I have a virtualised Windows XP SP3 machine, which I am connecting to over Remote Desktop. One of my scripts needs to use the %sessionname% variable. However this returns incorrect information. C:\>%sessionname% constantly returns RDP-Tcp#5, instead of the value for the currently connected session (RDP-Tcp#35 or similar), as shown in Task Manager This causes my scripts to contain incorrect information. What can I do to resolve this? Edit Further Information: A restart appears to solve the problem for the first connection, but then subsequent connections have the numbers fall out of sync again.

  Read the article

• route to vpn based on destination

  - by inquam

  I have a VPN connection on a Windows 7 machine. It's set up to connect to a server in US. Is it possible, and if so how, to setup so that .com destinations uses the vpn interface and .se destinations uses the "normal" connection? Edit (clarification): This is for outbound connections. I.e. the machine conencts to a server on foo.com and uses the VPN and the machine connects to bar.se and uses the "normal" interface. Let's say foo.com has an IP filter that ensures users are located in USA, if I go through the VPN I get a US ip and everything is fine. But tif all traffic goes this way the bar.se server that has a IP filter ensuring users are in Sweden will complain. So I want to route the traffic depending on server location. US servers through VPN and others through the normal interface.

  Read the article

• How to show what proxies/firewalls are enabled on Windows XP?

  - by Stephen Melrose

  Hi, I'm trying to fix a Windows XP PC that is having a strange problem. The computer can't seem to connect to the internet, even though an internet connection is present. The router and internet is working fine as I've connected a laptop to it via LAN and wireless and both worked fine. The PC in question is connected to the router as it has an IP from the DHCP. The problem is I can't connect to nor ping any internet address from the PC. I can't even connect to the router admin itself. I've tried both LAN ports in the PC, same problem and both. I'm assuming there's a proxy or firewall on the PC stopping the connections, I just don't know how to find them or see which one is causing the issue. So my question is how do I on Windows XP display the system proxy settings and/or any firewalls that are running? Cheers.

  Read the article

• internet speed and routers are controlled by whom

  - by Ozgun Sunal

  i need to learn two things. each is related to other a bit. The first one is, while our LAN speed is usually 100 Mbps or at gigabit levels(very big compared to WAN speeds), WAN speed for instance DSL connections are far less than this. However, we are able to download huge files at those Mb speeds. Isn't this weird? [my real concern is why WAN speed is lower than LAN speeds] Who controls those routers around the large Internet? (while we, as web clients are connected to Internet, packets travel through those routers to the destination network/s).But, are those routers all inside the ISP network and if not, who controls those large numbers of routers?

  Read the article

• How can I measure TCP timeout limit on NAT firewall for setting keepalive interval?

  - by jmanning2k

  A new (NAT) firewall appliance was recently installed at $WORK. Since then, I'm getting many network timeouts and interruptions, especially for operations which would require the server to think for a bit without a response (svn update, rsync, etc.). Inbound SSH sessions over VPN also timeout frequently. That clearly suggests I need to adjust the TCP (and ssh) keepalive time on the servers in question in order to reduce these errors. But what is the appropriate value I should use? Assuming I have machines on both sides of the firewall between which I can make a connection, is there a way to measure what the time limit on TCP connections might be for this firewall? In theory, I would send a packet with gradually increasing intervals until the connection is lost. Any tools that might help (free or open source would be best, but I'm open to other suggestions)? The appliance is not under my control, so I can't just get the value, though I am attempting to ask what it currently is and if I can get it increased.

  Read the article

• Windows 7: how can I add an IP range in the "route" command?

  - by KeyStroke

  Hi, I'm using two network connections, and I tried using the "route" command so that when I access a specific internal IP on my LAN, it would use connection 1, anything else would go normally through connection 2 (which doesn't have access to my LAN). The problem is I have a bunch of internal IP's that I need to access, and the "route" command doesn't seem to allow me to add an IP range instead of specific IP. And connection 1 doesn't have internet access, so I can't use it as my default connection. Any idea how this can be solved? Your help is appreciated

  Read the article

• How can I make my browser(s) finish AJAX requests instead of stopping them when I switch to another page?

  - by Tom Wijsman

  I usually need to deal with things on a page right before switching to yet another page, this ranges from "liking / upvoting a comment or post" up to "an important action" and doesn't always come with feedback on whether the action actually proceeded. This is a huge problem! I assume the action to proceed once I start the particular AJAX request, but because I switch to another page it didn't actually happen because the AJAX request got aborted. This has left me several times with coming back to the page and seeing my action didn't take place at all; to give you an idea how bad this is, this even happened once when commenting on Super User! Is there a way to tell my browser to not drop these AJAX connections but simply let them finish?

  Read the article

• Wireless Connection unstable with multiple devices connected

  - by KingIsulgard

  My wireless network works perfectly when only 1 device is connected. Super fast, full strength. But as soon as multiple devices are connected to the wireless network the connections become unstable (constantly losing connection with the internet, not the network itself). It's quite annoying. I have a Sitecom Wireless 300N XR Gigabit Router WL-306, which should be a decent router so I'm guessing there must be something wrong with my configuration. Does any of you know what might cause this? Thanks

  Read the article

• Several border firewalls in the same network

  - by nimai

  I'm currently analyzing the consequences of multipath connections for the firewalls. In that context, I'm wondering if it's really uncommon to have several firewalls at the borders of a network to protect it. The typical case I'd imagine would be a multihomed network, for which the administrator would have different policies for links from different (or not) ISPs. Or maybe even in an ISP's network. What would be the practical (dis)advantages of such a configuration? Could you provide an example of an existing topology using several border firewalls?

  Read the article

• Load testing nginx inside AWS

  - by andy

  I'm trying to load test nginx running on AWS. I need to try to optimise it to handle 1Gbps of inbound traffic. Currently I've got it to peak at 85Mbit/s by running nginx on an m1.large with 4 other machines hitting it by using ab with -i (for head requests) -k (keepalives) -r (ignore failed requests) -n 500000 -c 20000. I'm struggling to generate more than 85 Mbit/s traffic from 4 machines, yet when I do scp a large file I get nearly 0.25Gbit/s of traffic going over the network. Are there any tools or approaches that I could use to load test nginx that might generate more load? I'm only interested in inbound traffic, so perhaps a DoS tool could help if it chucks away responses? I'm hitting a very small (40 byte) static asset, and have peaked at handling 50K concurrent connections and getting 25k reqs/s when just using a single load generator machine.

  Read the article

• Installing raid controller forces reinstall of Windows Server 2008

  - by Tyler

  So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

  Read the article

• Can't access the Internet in VMware Workstation

  - by asunnysunday

  I'm using VMware 7.1.2 in Windows 7 with Ubuntu 11.04 as a guest OS. In the host OS (Windows 7), I can access the Internet without any problems but in the virtual machine I can't access the Internet. I've tried the following but with no success: Use all methods of connecting to the Internet in "Virtual Machine Settings": Bridged, NAT, Custom; none work. Used cabled and wireless connections on the PC - neither of them work. I've used Ubuntu in VMware for several months - previously the Internet was always accessible. Could the cause of this be because I upgraded to Ubuntu 11.04?

  Read the article

• Win Server 2008: Task Scheduler runs programs twice or late

  - by SomeName

  Hi, I need to restart a service every day. I have logon hours restricted at 3:00 am, and the server will logout existing TS connections. I have two tasks scheduled: "Daily At 3:20 am every day" "start a program" "c:\windows\system32\sc.exe stop myservice" "Daily At 3:22 am every day" "start a program" "c:\windows\system32\sc.exe start myservice" I came in today to notice that the service wasn't running. I've been digging in logs, and found these entries: For stop task, history: a) 3:29:35 am: Action Completed (sc result code 0) b) 3:20:00 am: Action Completed (sc result code 0) For start task, history: a) 3:29:35 am: Action Completed (sc result code ERROR_SERVICE_ALREADY_RUNNING 1056 (0x420)) b) 3:22:01 am: Action Completed (sc result code 0) Checking event logs shows me: a) 3:29:35 am, Application log, Source myservice, "The service was stopped" b) 3:29:25 am, System log, Source Service Control Manager, "The myservice service entered the stopped state" So, What would have caused both tasks to run at 3:29 am? Why don't I see a message from the SCM saying that the service entered the running state? Is this the preferred way to do this? Thanks!

  Read the article

• Installed IE8 & SP3 on XP now I can't HTTPS from any browser.

  - by Kevin

  The computer is Windows XP Professional SP3 with IE8. On the Tools Options Connections the "Settings" is GRAYED OUT (I am an admin on the machine) Any browsing of https:// addresses results in IE displaying the following: "this program cannot display the web page" After installing an alternate browser and trying the same https:// address I get a similar error message. I have tried using Compatibility View Settings to for all web pages and this has no effect on the problem. HTTP addresses work fine, I can PING sites such as google.com without issue. Question: What could be preventing me from getting at the settings to check to see if I'm using a proxy? What else could be preventing HTTPS access?

  Read the article

• Windows 7 - XP Mode - Apache

  - by Howard

  I've setup Virtual PC and XP Mode on my Windows 7 Pro. Using Apache 2.0.52 I have no problems having my website up and running on the Windows 7 machine. But Under VPC/XP Mode the best I can do is Localhost mode. What do I need to do to enable http connections? I need the XP Mode as besides the website I also run a Web BBS and a Dos based (via telnet) BBS. Some of the apps in the Dos BBS just won't work under 64 bit, no matter what setting (capability) are used. Thanks in advance...

  Read the article

• Wamp server won't run [closed]

  - by Alegro

  win xp sp3 I installed wamp 2.2 and after starting it was allways orrange and offline. Clicking on "Put Online" I got the error: wampserver aestan tray menu - could not execute menu item (internal error)... Somewhere I found the advice to change httpd.conf file (Listen 80 - to Listen 8080) Now, mouseover try icon shows that server is online, but it is still orrange, and click on localhost shows: Firefox can't establish a connection to the server at localhost. Skype is not running and inside Skype options "Use port 80 and 443 as alternatives for incoming connections" is unchecked. A couple of months ago I was able to run wamp normaly. Could someone help, pls.

  Read the article

• Windows 8 / Server 2012 RDP connection is slow

  - by Chris

  I recently installed Windows Server 2012 for development purposes at our office and noticed immediately that connecting via RDP is slow. It can take 5-10 seconds to connect at times, where as connecting to any of our Win7 or Win2008R2 boxes takes at most 1-3 seconds. At first, I chalked this up to the box itself needing a driver update or something, but just yesterday, I installed Win8 on my desk PC and connecting from home to that machine produces the same result. There is a 3-4 second pause at "securing remote connection" and then again at "configuring remote session". I don't see any warnings in the event log, and once connected, there do not appear to be any performance issues. Is there a known problem with RDP connections on Windows 8 systems? Anything I should look for?

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >