Search Results

Search found 56140 results on 2246 pages for 'super computer'.

Page 118/2246 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

  • can't properly shutdown ubuntu and sound problem on HP mini 311 netbook

    - by Viele
    hi, I recently bought a HP mini 311 netbook. I replaced its harddrive and installed ubuntu 10.04. Since then, I have encountered some very strange problem with its sound and shutdown/reboot. At times, when I start the computer, it will have no sound, on the GUI the sound is at max, but no sound is available. This sometimes also happen after after upgrades, hibernate, and toggling the wireless radio button. Strangely, when the sound is out the device will also refuse to be shutdown. If I shutdown the computer using the GUI, it will simply go back to the log in screen without actually shutting down. If I use "sudo shutdown 0", the computer will hang on the loading screen of the shut down process. I had to force the pc to shutdown by holding the power button down. usually (probably always) after I force a turn-off then start off again. the sound and shutdown become normal. I wonder if anyone have clues regarding to the cause of this problem. This the info about the computer: 1) installed ubuntu 10.04LTS RC, later upgraded to formal released version. 2) cat /proc/asound/version == "Advanced Linux Sound Architecture Driver Version 1.0.21." however, when doing 'alsaconf' the version displayed is 1.0.23 any help is appreciated. Thanks

    Read the article

  • Route all traffic via OpenVPN client

    - by Ilya
    I've got OpenVPN client running on 192.168.0.3. What I'd like to do is route all the traffic from the second computer with 192.168.0.100 via OpenVPN client that's running on the first computer. My router ip is 192.168.0.1 Network topology: Computer with OpenVPN client: 192.168.0.3 Computer that has to be rerouted: 192.168.0.100 Router: 192.168.0.1 I want it to work in the following way: 192.168.0.100 computer => 192.168.0.3 computer => OpenVPN => 192.168.0.1 How can I achieve that by only modifying windows' routing table? I've tried the following, which didn't work (it just dropped my internet connection): route delete 0.0.0.0 mask 255.255.255.255 192.168.0.1 route add 0.0.0.0 mask 255.255.255.255 192.168.0.100 Thanks!

    Read the article

  • How can give group in active directory folder access by group policy

    - by AAA-Super
    I have windows server 2003 64bit and my clients running on windows xp 32bit. My clients have user rights so they can't install any program. I have some programs needs admin rights for example I have French dictionary without admin right the program will not work properly. I don't want go to each PC and login with admin account then go to program folder located in programs files to give full permission to the group. Is there a way to add them folder in group policy so I can force all the PCs to have full access on the folder? Thanks you in advance.

    Read the article

  • Debugging a Drobo that chokes Windows 7x64 When Plugged In

    - by Pridkett
    I've had a love hate relationship with my Drobo for a long time. After two years of using it on a Linux box, I moved it over to a Windows 7 machine where it seemed to work just fine for a long time, but it was under very light usage. Mainly backups that never actually happened. Recently I began using it for additional backup services (through CrashPlan, which is great). This means the Drobo gets a lot more usage. Also it means that something interesting happens, the Drobo can choke my system on startup. Here's what I mean: Start computer without Drobo plugged in, CrashPlan and Drobo Dashboard services disabled: 105s Start computer with Drobo plugged in Crashplan disabled, Drobo Dashboard enabled: 250s (and 1 cpu at 100% for a very long time, drobo churning) Start computer with Drobo plugged in, CrashPlan and Drobo Dashboard disabled: 250s (1 cpu at 100% for a very long time, drobo churning) Start computer with Drobo plugged in, Crashplan and Drobo Dashboard enabled: 300s (1 cpu at 100% for a very long time, drobo churning) If I yank the USB plug on the Drobo the CPU usage goes down to nothing very quickly. The slow startup in the fourth scenario is because CrashPlan is trying desperately to load stuff up on the H: drive before it gives up, so I've disabled it for the time being. So here's my question: What the heck is going on when I plug the drobo in? I've fired up Process Explorer and see that the System process is hogging the CPU, specifically it's an ntoskrnl.exe/KdPollBreakIn thread that's going ape. Is this something that's wrong with Drobo? Windows? Any idea on how to find out? If it matters, here's tech info: Athlon 64x2 4400, 2GB RAM, Win7 Ultimate, Drobo USB (2x1TB, 2x320GB)

    Read the article

  • Integrated Graphics went kaput, can I switch to dedicated graphics if I can't get into the BIOS

    - by Om Nom Nom
    I have an 8 year old computer (Pentium 4 1.6 GHz, 256 MB DDR RAM) which is not turning on (it beeps for 10 seconds and then goes off). Nothing appears on the screen, so I can't get into the BIOS. A computer repair person listened to the beeping pattern and told me that its because of the integrated graphics on the motherboard is defective. It's an ASUS P4S333-VM motherboard and the graphics solution is SiS 650. He tried putting in a PCI graphics card expecting that the computer will use that instead and ignore the integrated graphics, but apparently older computers don't switch automatically to the dedicated graphics card; it needs to be changed from the BIOS. But, I can't get inside the BIOS settings as I already said. I am told that the only option now is to replace the motherboard (which is not feasible since it's very old now). So, is there any way to make the computer use the PCI graphics card? IIRC, the motherboard also has an AGP port, but I think that it will also need to be selected from the BIOS?

    Read the article

  • How do I repair a Windows 7 installation damaged by Windows 8 sleep mode

    - by Mat
    I'm experimenting with a Windows 8 installation which is on a separate SSD. My actual Windows 7 installation I'm working with is on my old HDD. While Windows 8 was in sleep mode I swapped the hard disks and put in the Windows 7 HDD (I thought the computer was off). When I started the computer, Windows 8 started back up to the login screen – then it was stuck and some seconds later the computer rebooted. Now the Windows 7 Installation is damaged. When I boot, after the Windows 7 startup logo appears, a bluescreen shows up for few seconds stating: STOP: c000021a {Fatal System Error} The verification of KnownDLL failed. System process terminated unexpectedly with a status of 0xc000012f (0x00f0bb90 0x00000000). The system has been shut down. and then the computer reboots. The same happens in safe mode. 'Windows startup repair' cannot repair the issue. Any idea what could have happened exactly and/or how to repair this Windows 7 Installation?

    Read the article

  • How to backup iTunes on Windows to folder/share, i.e. without "Back Up to Disc"? No DVD writer avail

    - by Chris W. Rea
    (Surprised I didn't already find an answer here to this!) I've got a computer on which I'd like to back up the iTunes library – music, movies, apps, everything. We're talking multiple gigabytes. Unfortunately, it seems that iTunes' own built-in "Back Up to Disc" feature (the only backup feature I can find in iTunes) only functions with a CD or DVD writer/burner. The computer in question does not have a DVD burner. While it has a CD burner, attempting to back up to CDs would require dozens of discs plus more time than I'm willing to spend swapping them. So: What is the recommended way to back up an entire iTunes library on a Windows computer, to a non-CD/DVD location such as an external hard drive or a network shared folder? Then, once such a backup has been performed, what is the process for restoring the library – e.g. after the computer has been repaved with a new version of Windows – so that iTunes is resurrected whole and recognizes devices it syncs with? Thank you!

    Read the article

  • Password-protected sharing allows access to users who have no account?

    - by romkyns
    Running Win7 on two computers in my LAN. Computer A has password-protected sharing enabled, and shares a folder. It has a single user account "Bob", and the Guest account is turned off. The network is workgroup-based. According to the descriptions of the "password-protected sharing" I could find, the only people who can access the shared folder via the LAN are those who know the username+password for the "Bob" account. However a second computer on the LAN is able to view this shared folder by simply browsing to Computer A. They don't need to enter any passwords or anything. The only user account registered on that PC is called "Jim", and has a different password from "Bob". How on earth is computer B able to view this shared folder? Is the popular description of the "password-protected sharing" feature inaccurate / did I misunderstand it big time? P.S. There is a possibility that the password for "Bob" has been entered on that PC once, and possibly the "remember password" box was checked. I've looked in the "Credential Manager" on both computers and there is nothing saved anywhere.

    Read the article

  • How to sync two computers using new MobileMe calendar

    - by CesarGon
    I have been using MobileMe for over a year with success. I use it to sync my Outlook calendars in my work and home computers, using Windows 7 and Outlook 2007. The main Outlook calendar folder in my work computer is replicated to MobileMe as "Work", and synced to my home computer, and the main calendar folder in my home computer is replicated to MobileMe as "Home", and synced to my work computer. This means that I can see both "Work" and "Home" calendars from both computers (as well as from the web interface through me.com), which is very convenient. Yesterday I migrated to the new MobileMe calendar, accepting the suggestion that popped up on the me.com website. After the migration, the MobileMe control panel on each of Windows computers asked me to re-configure my calendar setup, and everything fell apart. The "Home" and "Work" calendar folders in Outlook are now ignored by MobileMe, and new ones named "Home in MobileMe" and "Work in MobileMe" have been created, and placed in a separate Outlook data file rather than the default. This means that now: I now have four folders, two of which are not replicated to MobileMe The two folders that are not replicated reside on a separate data file, so alarms and reminders don't work; they're basically useless to me as calendar folders In addition, the button in the MobileMe Control Panel that used to let me specify what MobileMe folder should be synced against the default Outlook folder has gone. MobileMe is now too smart. Do you have any idea how to undo this mess and go back to a situation where I have two folders, as described in the top paragraph, which keep synced? I don't want an extra data file. Thanks.

    Read the article

  • Raid 1 array won't assemble after power outage. How do I fix this ext4 mirror?

    - by Forkrul Assail
    Two ext4 drives on Raid 1 with mdadm won't reassemble after the power went out for an extended period (UPS drained). After turning the machine back on, mdadm said that the array was degraded, after which it took about 2 days for a full resync, which completed without problems. On trying to remount the array I get: mount: you must specify the filesystem type cat /etc/fstab lines relevant to setup: /dev/md127 /media/mediapool ext4 defaults 0 0 dmesg | tail (on trying to mount) says: [ 1050.818782] EXT3-fs (md127): error: can't find ext3 filesystem on dev md127. [ 1050.849214] EXT4-fs (md127): VFS: Can't find ext4 filesystem [ 1050.944781] FAT-fs (md127): invalid media value (0x00) [ 1050.944782] FAT-fs (md127): Can't find a valid FAT filesystem [ 1058.272787] EXT2-fs (md127): error: can't find an ext2 filesystem on dev md127. cat /proc/mdstat says: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md127 : active (auto-read-only) raid1 sdj[2] sdi[0] 2930135360 blocks super 1.2 [2/2] [UU] unused devices: <none> fsck /dev/md127 says: fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/md127 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> mdadm -E /dev/sdi gives me: /dev/sdi: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 3e6e9a4f:6c07ab3d:22d47fce:13cecfd0 Update Time : Tue Nov 13 20:34:18 2012 Checksum : f7d10db9 - correct Events : 27 Device Role : Active device 0 Array State : AA ('A' == active, '.' == missing) boot@boot ~ $ sudo mdadm -E /dev/sdj /dev/sdj: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 7fb84af4:e9295f7b:ede61f27:bec0cb57 Update Time : Tue Nov 13 20:34:18 2012 Checksum : b9d17fef - correct Events : 27 Device Role : Active device 1 Array State : AA ('A' == active, '.' == missing) machine@user ~ dmesg | tail [ 61.785866] init: alsa-restore main process (2736) terminated with status 99 [ 68.433548] eth0: no IPv6 routers present [ 534.142511] EXT4-fs (sdi): ext4_check_descriptors: Block bitmap for group 0 not in group (block 2838187772)! [ 534.142518] EXT4-fs (sdi): group descriptors corrupted! [ 546.418780] EXT2-fs (sdi): error: couldn't mount because of unsupported optional features (240) [ 549.654127] EXT3-fs (sdi): error: couldn't mount because of unsupported optional features (240) Since this is Raid 1 it was suggested that I try and mount or fsck the drives separately. After a long fsck on one drive, it ended with this as tail: Illegal double indirect block (2298566437) in inode 39717736. CLEARED. Illegal block #4231180 (2611866932) in inode 39717736. CLEARED. Error storing directory block information (inode=39717736, block=0, num=1092368): Memory allocation failed Recreate journal? yes Creating journal (32768 blocks): Done. *** journal has been re-created - filesystem is now ext3 again *** The drive however still doesn't want to mount: dmesg | tail [ 170.674659] md: export_rdev(sdc) [ 170.675152] md: export_rdev(sdc) [ 195.275288] md: export_rdev(sdc) [ 195.275876] md: export_rdev(sdc) [ 1338.540092] CE: hpet increased min_delta_ns to 30169 nsec [26125.734105] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [26125.734115] EXT4-fs (sdc): group descriptors corrupted! [26182.325371] EXT3-fs (sdc): error: couldn't mount because of unsupported optional features (240) [27083.316519] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [27083.316530] EXT4-fs (sdc): group descriptors corrupted! Please help me fix this. I never in my wildest nightmares thought a complete mirror would die this badly. Am I missing something? Suggestions on fixing this? Could someone explain why it would resync after the powerout, only to seemingly nuke the drive? Thanks for reading. Any help much appreciated. I've tried everything I can think of, including booting and filesystem checking with SystemRescue and Ubuntu liveboot discs.

    Read the article

  • Windows, why 8 GB of RAM feel like a few MB?

    - by Desmond Hume
    I'm on Windows 7 x64 with 4-core Intel i7 and 8 GB of RAM, but lately it feels like my computer's "RAM" is located solely on the hard drive. Here is what the task manager shows: The total amount of memory used by the processes in the list is just about 1 GB. And what is happening on my computer for a few days now is that one program (Cataloger.exe) is continually processing large quantities of (rather big) files, repeatedly opening and reading them for the purposes of cataloging. But it doesn't grow too much in memory and stays about that size, about 90 MB. However, the amount of data it processes in, say, 30 minutes can be measured in gigabytes. So my guess was that Windows file caching has something to do with it. And after some research on the topic, I came across this program, called RamMap, that displays detailed info on a computer's RAM. Here is the screenshot: So to me it looks like Windows keeps in RAM huge amounts of data that is no longer needed, redirecting any RAM allocation requests to the pagefile on the hard drive. Even when I close Cataloger.exe, the RamMap reports the size of the mapped file as about the same for a long time on. And it's not just this particular program. Earlier I noticed that similar slowdown occurred after some massive file operations with other programs. So it's really not an exception. Whatever it is, it slows down the computer by like 50 times. Opening a new tab in Chrome takes 20-30 seconds, opening a new program can take up to a minute. Due to the slowdown, some programs even crash. So what do you think, is the problem hiding in file caching or somewhere else? How do I solve it?

    Read the article

  • Windows 8 Doesn't Shutdown Properly With Fast Start-Up Enabled

    - by Patrick
    While Fast start-up is enabled, on turning the computer off (shutdown) the computer idles for about 5min after logging out/screen turning off. It then turns off. On returning into Windows I receive the error message saying Windows didn't shut down properly. Hibernate works fine, and I am told this shouldn't be the case - If one doesn't work, neither should. It works when both Fast start-up is enabled and disabled, as does restart and sleep. Windows is installed under UEFI. The UEFI ultra fast boot option for my motherboard cannot be enabled as my GPU doesn't support some UEFI GOP tech. As far as I know, not related to windows fast start-up, but thought it was worth mentioning. To clarify, if this: http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html is enabled, the computer does not shut down properly. EDIT: Some more information on the matter: Formatting didn't fix the issue. Still fails regardless of drivers installed. Hardware was purchased ~6months ago. Running a good SSD. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Upon installing WPT as suggested below to figure out what was happening during shutdown, and running the cmd xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP Windows fast start-up is now working consistently. Still works upon uninstalling WPT. This is the only change to occur on the computer. Nothing else has bee installed/uninstalled, no Windows Updates, nothing. Windows fast start-up did not work prior to installing WPT and running the cmd (made sure I tested).

    Read the article

  • How to pipe internet radio into a tuner?

    - by JW
    UPDATE: Thanks everyone for the ideas! This was an area I knew very little about but now I can talk with a little more expertise about it. Much appreciated! Visited my dad this weekend and he wants to pipe some internet radio he's found down to a tuner on quite a distance away in the house. He uses computers for only very basic things: e-mail, getting the Post crossword, checking Yahoo!, checking recipes, etc. There's currently one computer in the house (no router). My initial suggestion (without any research whatsoever) was to get a wireless router and a netbook for downstairs near the tuner, but he initially wasn't too keen about having another computer down there. Anyway, is there any computer hardware that could magically pipe the audio output from the computer down to one set of (RCA) audio inputs on the tuner? Wireless isn't necessary but it probably would be easier. Anyway, thanks for your suggestions! UPDATE Thanks everyone! Voted up all of your suggestions now that I have 15 rep. Much appreciated.

    Read the article

  • USB Device Not Recognized

    - by Franky Chanyau
    Ok this one gets a little bit complicated but bare with me :D A client brought her computer in to be fixed about a week ago, she says she tried charging a new phone she bought from china and immediately after her usb keyboard and mouse stopped working (typical). I had a quick look at it but because I did not have time, I did a simple system restore and it seemed as if the issue was fixed. I promptly sent it back to her but a few days back she called saying that the issue has returned. Turns out the computer was riddled with some virus that also corrupted her XP install so I had to format the whole thing(yes I tried repairing). I hoped that the format would fix the keyboard and mouse issue but the whole thing has escalated and the computer will throw the "USB Device not recognized" error when I plug anything into the many usb ports it has. I have installed all the drivers (including the chip set drivers) for the pc and even tried the unplugging from the power for a while trick, still no luck. I am sure it is not a hardware issue, but may be wrong. This is way over my head. Can anyone help? Computer: HP Compaq DC7100, Intel Pentium 4, 512mb RAM OS: Windows XP Professional SP2

    Read the article

  • How to make network drives appear even if disconnected?

    - by Jake
    I have the same problem as many others: network and home drives set by group policy and AD are not connected on windows startup. The prime suspect is that the LAN or wireless does not connect until after user log in. I have already given up on that. Now, I just want the disconnected drives to continue to list in My Computer so that if the user goes in and double click the drive, it will connect again. However, on some machines the drive is completely missing from My Computer. If I right click My Computer Map Network Drive again, it does work. But it's very troublesome to do it all the time. And I don't want to use a script to map the drives because I don't want to appear to be using a hacky solution to the users. The drives listed as disconnected will look more like a "built-in feature", and gives users more confidence. How can I keep the disconnected drives in My Computer? I am using Windows 7 Professional and Win2k8.

    Read the article

  • Laptop shuts down randomly without warning

    - by Robert P.
    My Asus Zenbook UX32V turns off randomly when I'm working on it. This happens both when the computer is recently turned on (5 minutes), and after being on for several days. I'm not running any heavy software The laptop is not heating The fan is not working on the maximum capacity (it's not heating) It happens when the laptop is lying still on the table It is no warning, it simply goes black It happens both when charging and on battery My guess is that it suddenly lose power somehow. What puzzles me is that I can flip the laptop upside down, sideways, shake it, etc. without it shutting off. This makes me think it's not something that's loose causing occasional short-circuits. I realize that the laptop probably doesn't like flipping and shaking, but it was the best way I could troubleshoot. I rarely turn the computer off, only have it in hibernate or sleep mode (most often hibernate). I've never experienced that the laptop is off when I wake it up from sleep mode. I've had the problem for a few months and it happens 2-8 times a week. Specs: Asus Zenbook UX32V Windows 8.1 (it happened in Windows 8.0 too) Intel i5-3317U CPU @ 1.70GHz The laptop is approx 1.5 years, but it has a small dent on one of the sides that probably voids the warranty. The dent has been there since week one and I don't think it's related to the problems I'm having now. Does anyone have a clue what might cause this, and how it might be fixed? I've read all other questions (some of which are listed below) that seem related to my issue, but none report the same behavior as I'm experiencing. Most report heavy games, heating etc. Asus N53J Laptop randomly shuts down Laptop is randomly shutting off Computer shuts down without warning My laptop acer aspire 5720 suddenly turn off randomly Computer randomly shutting down Windows 8.1 randomly shuts self down ASUS K55VM Laptop unexpectedly shuts down

    Read the article

  • Commercial product using a GPL OS

    - by pfried
    we are planning to create a commercial product. The product consists of come MCUs and a small computer (we are developping on a raspberry pi at the moment). The computer needs an operating system as we would like keep things like WLAN and booting as simple as possible. We create some software running on this computer (node.js application). The most operating systems like Arch Linux are licenced under the GPL. The product we would sell contains the computer with preinstalled OS and software. This system operates as a central access point to MCU devices and is able to control them. We use other's software in our product. We do not modify their source code. The product (the computer part) consists of a computer, an OS and software we create. How does the use of an OS affect our own code (licence)? Is there a possibility of avoiding GPL for our own code? eg. shipping the software seperated? Are there any effects to other components of our product, eg. the MCU part? The node.js application delivers a WebApp to the client where it is executed. Are there any effects (As we would like to sell parts of the code as an additional App on the App Stores)? I know we make use of the work of the community and i respect this. The problem is: The software alone is kind of useless without the MCU devices. I do not expect a legal advice.

    Read the article

  • Windows Defender Update KB915597 (Definition 1.135.415.0)? Killed My Live Discs

    - by user88311
    Here's my problem, for those willing to read for about 2 minutes here's the entire story, http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/bsod-after-windows-defender-update-kb915597/a4b5fca3-0274-47b4-97c4-61b34c4c4599, for those who want the short version here's what happened. After windows update automatically updated windows defender to kb915597, my computer starting getting bsods on shut down and start up and started experiencing problems withe the usb ports. So I decided to go to the microsoft answers site for help, I know that was probably my first mistake, so I followed their advice and they turned my computer into a large paper weight. Luckily I make physical backups of my c drive every few months and I have one from back in july, so I figured I'd boot up a ubuntu live disc, copy all my files from the past 2 months to a external drive and just copy the backup back to the c drive, that's where I ran into this problem. When I put in either a ubuntu or kubuntu disc, everything goes well, until it finishes the loading bar then when the OS would presumably start up, the computer resets, I've tried with ubuntu, kubuntu and gparted, and only gparted is able to get to the point where it starts up, but even then when I try to access the internet from it, the computer resets, and when I tried to copy the entire C drive partition to a blank external I wasn't able to. So I figured somehow maybe the C drive had something to do with it, so I unplugged the C drive so my computer was just a 2.8 ghz processor and 2 gigs of ram, should have had no problem starting a live disc but the problem still continues. After doing some googling around I've found whenever windows gets a update with the title KB915597 it's pretty much the kill switch for windows, I've tried contacting microsoft tech support and even managed to directly contact a software engineer but as soon as I mention KB915597 they all just blew me off. I hope anybody who reads this has any idea how to fix this, I'm going to attempt to install ubuntu or kubuntu to a external drive using the same computer and see what happens now.

    Read the article

  • Drivers and firmware for the LiteOn ihap-122-9 DVD drive

    - by Sandy
    I'm trying to replace the DVD drive in my old PC. LiteOn.com is a mess and I can't find a single working driver or firmware update there, or anywhere. Windows XP tries to use a default, generic driver dated 2001. (About 9 years before this drive even existed.) http://www.firmwarehq.com/download_1..._6L0H.EXE.html This correctly finds my LiteOn ihap-122-9 DVD Drive. It correctly finds that I'm currently using firmware 6L0F. It correctly tries to install 6L0H. It completes 100% but then just fails and says "contact your vendor". Does anyone know why? Where can I actually get drivers... and firmware updates... that actually work for the ihap-122-9? Apparently, the newest driver IS the 1 made 9 years before the drive existed. (Unbelievable.) And the latest firmware is the 1 that is already in the drive. (Common.) No other drive I've had in this computer ever had a problem. This brand new LiteOn is doing this: Opening MY COMPUTER now takes 60 seconds. MY COMPUTER marking the drive as "DVD F:" takes another 30 seconds. MY COMPUTER showing "Batman II" title takes another 15 seconds. Clicking and running the movie will take another 30 seconds for the main-menu to appear. The movie starts about 20 seconds later. The movie runs fine for 1-2 seconds... then stops for 5 seconds.... then starts again and plays for 1-2 seconds. Repeats for 2 hours. (It happens with all store-bought DVDs and all home-made DVDs.)

    Read the article

  • Blank list of windows services

    - by Joe
    Recently when I open windows services (always as administrator) I get a blank list of services: When I try and click on one of the empty lines I get this "Script Error" message: This happens over and over again, after several times I restarted my computer. I can't pinpoint exactly when this started happening or if I made any specific changes to my computer at that time. Someone told my to try running scf /scannow as administrator, but when I try to do that the scan stops at 34% and I get the message: "Windows Resource Protection could not perform the requested operation." I am running Windows 7 Enterprise 64 bit, and I would really like to avoid reinstalling windows. Does anyone know how to fix this? Edit - Here is another attempt I made and some more information that might help: Following WhoIsRich's suggestion, I tried the command sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. This gave the error message "The arguments passed to sfc are invalid. The offline windows directory specified points to the online system", and then I realized this command is meant to be run after booting from another system. Since I don't have my windows installation disk right now, I used my own system to create a recovery disk, and then restarted my computer and used the recovery disk to boot. I then ran the above command, and I got the following message: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log". I then restarted my computer and let it boot up normally. The problem with windows services persists, and the CBS.log file is a long log file with many entries, and I don't know if there is useful information in it, and if there is, how to find it.

    Read the article

  • Laptop Randomly Turning On and Off

    - by Ian Mallett
    So, I have a pretty new laptop, and one of its quirks is that, at random times (though typically in the middle of the night), it seems to wake up from sleep mode, churn a bit, and then go back into sleep mode. I write "seems" because its fans are very loud, so it's obvious when it's not asleep, but during the time it is "on", I can't see anything on the screen. I have researched the problem somewhat, and could only find similar issues; nothing identical. In those cases, it appeared that certain devices could be responsible. Nothing is plugged into my computer during this behavior, but I nonetheless disabled every device's permission to wake the computer through the device manager. This included disabling the magic packet wake for the network (despite its only having a wireless connection). Using "powercfg /lastwake" gives an empty wake history. But, I also went through all the tasks and checked if they would wake the computer. None appeared to. The problem persisted, so, after some more research, I found this, and executed it for all power schemes on the computer. The problem persists. System: OS: Windows 7 Professional CPU: Intel 990X GPU: NVIDIA GeForce 580M/12GB RAM Motherboard: Clevo X7200 Model: NP7282-S1 (Sager-built laptop)

    Read the article

  • Why can't I connect to my router's config page with Windows 7?

    - by user17940
    I've got a Belkin wireless router, and just bought a new Dell computer with Windows 7 pre-installed. I can connect to the Internet and my home network just fine, but when I try to visit my router's configuration page at http://192.168.2.1, I get a "Connection was reset" error. Nothing I do will make the router's configuration page come up in my web browser. More background information: I could always get to the router's config page from my Windows XP machine. I never had any trouble prior to getting this Windows 7 computer. I can ping 192.168.2.1 successfully from my Windows 7 computer. My PC is connected to the router by a physical CAT5 cable, not via wireless. Every device connected to my router, including the new computer, can get to the Internet with no problem. Here are some things that did not solve the problem: I tried turning off IPV6 in Windows. I tried turning off my firewall and antivirus software I tried using https instead of http I tried disabling and then enabling the network connection in Windows I tried reverting my network card driver back to an older version I have tried both Firefox and Internet Explorer web browsers. Has anyone experienced something like this before, and solved it? Thanks a lot for your help!

    Read the article

  • LaserJet M1522nF firmware was corrupted during the update

    - by AAA-Super
    I have a LaserJet M1522nF, and the problem when I working on is that it is freezing every time so I decide to update the firmware. During the updating the device was down because of electricity so I turned it on again and there is a message on the small screen saing HEWLETT-PACKARD After nothing appeared on screen the device seems to be blocked or the firmware was corrupted. Now, how can I reset the update of firmware or how can I reinstall it?

    Read the article

  • Routing and Remote Access Port Mapping not applied to localhost

    - by Computer Guru
    Hi, I've set up Routing and Remote Access (Windows Server 2003) to forward publicip:80 to a server on the private internal network, and that's working great. Incoming requests from the internet to port 80 are correctly forwarded to our internal web server and everything is fine. However, requests on the server itself are not being forwarded. That is, if I open a console window and type "telnet publicip 80" from the server on publicip, the request is not forwarded to the private server. I understand that in RRAS I've mapped port 80 on the public interface to the private server and that's why it's not working; but I don't know how to configure it so that requests from the local PC are also forwarded to the private server. I'd appreciate any help or feedback on the matter. Thanks!

    Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >