Search Results

Search found 4139 results on 166 pages for 'creation kit'.

Page 119/166 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

  • mkfs Operation Takes Very Long on Linux Software Raid 5

    - by Elmar Weber
    I've set-up a Linux software raid level 5 consisting of 4 * 2 TB disks. The disk array was created with a 64k stripe size and no other configuration parameters. After the initial rebuild I tried to create a filesystem and this step takes very long (about half an hour or more). I tried to create an xfs and ext3 filesystem, both took a long time, with mkfs.ext3 I observed the following behaviour, which might be helpful: writing inode tables runs fast until it reaches 1053 (~ 1 second), then it writes about 50, waits for two seconds, then the next 50 are written (according to the console display) when I try to cancel the operation with Control+C it hangs for half a minute before it is really canceled The performance of the disks individually is very good, I've run bonnie++ on each one separately with write / read values of around 95 / 110MB/s. Even when I run bonnie++ on every drive in parallel the values are only reduced by about 10 MB. So I'm excluding hardware / I/O scheduling in general as a problem source. I tried different configuration parameters for stripe_cache_size and readahead size without success, but I don't think they are that relevant for the file system creation operation. The server details: Linux server 2.6.35-27-generic #48-Ubuntu SMP x86_64 GNU/Linux mdadm - v2.6.7.1 Does anyone has a suggestion on how to further debug this?

    Read the article

  • IIS WebServer CreatesNew file: OwnerShip?

    - by Beaud.
    IIS is configured for Integrated Windows Authentication. web.config is configured as follows: <authentication mode="Windows" /> <identity impersonate="true" /> We are Load balancing between \webserver1 and \webserver2. Windows Server 2003 \\webserverX creates a XML file to \\share1 and access is denied. We got pass through access denial by allowing Everyon to access the share... We would like to have the impersonated user to be the owner of the created file. Instead, \\webserver1's computer account is the owner. How can we make sure that the impersonated user has ownership of the file at creation time? PROGRESSION: I decided to create the file locally on \\webserver1's root directory. File's ownership is NETWORK SERVICES even if impersonate="true". I'm unable to change ownership of the file in C# code. Why when creating a file, IIS won't use the impersonated user's write permissions? If it actually does, what I am doing wrong?

    Read the article

  • What options to use for Accurate bacula backup ?

    - by Kiss Stefan
    It's actually 2 question in one. First is a bit more theoretically. So when specifying accurate options how does bacula figure out if a file needs to be backed up ? it's a simple AND ? As in if the options are Accurate = sm5 bacula will not backup the file if ((size = old size) AND (modtime = old modtime) AND (md5 = old md5)) Is that correct ? Do any of the options take precedence ? as in would be a file skipped if modif time is diffreent but it has the same md5sum ? Are there any implied options that you cannot ignore ? Practical case, ( bacula 5.0.1 ) I have to back-up a svn repo, in order to be able to make incremental backups as simple as posible i am hotcopying (client run before) it to another location, that bacula will backup ( then delete it with client run after). Now in the fileset i have Accurate = spnd5 This should tell bacula to take into consideration size , permission bits number of links , decreases in size and md5sum. However , an incremental is also including a full copy of the svn. What am i doing wrong ? it seems that it takes into account creation time even tho i have not specified it.

    Read the article

  • Why is the wrong name server information at crsnic.net & gtld-servers.net ?

    - by danorton
    Did I screw this up? I don’t even know how this might have happened, so I’d like to learn. I’m trying out HostGator’s reseller service and I bought a domain name through it, but I didn’t want the default name servers and so I changed them during the registration. After registration the domain name record is correct everywhere except at whois-servers.net and whois.crsnic.net and it looks like the DNS network is using that same information. $ whois -h whois.enom.com. example.com ... Name Servers: dns1.name-services.com dns2.name-services.com dns3.name-services.com dns4.name-services.com dns5.name-services.com ... $ whois -h whois.crsnic.net. example.com Domain Name: EXAMPLE.COM Registrar: ENOM, INC. Whois Server: whois.enom.com Referral URL: http://www.enom.com Name Server: NS1.HOSTGATOR.COM Name Server: NS2.HOSTGATOR.COM Status: clientTransferProhibited Updated Date: 01-jun-2010 Creation Date: 31-may-2010 Expiration Date: 31-may-2011 >>> Last update of whois database: Tue, 01 Jun 2010 19:20:47 UTC <<< ... $ dig +norecurse @b.gtld-servers.net. example.com. NS ... ;; AUTHORITY SECTION: example.com. 172763 IN NS ns2.hostgator.com. example.com. 172763 IN NS ns1.hostgator.com. ... My next step is to let HostGator have a look, but first I want to better understand how this happened. Thanks.

    Read the article

  • OS X superuser folders automatically created. Perusers launchd process appears to kill 501

    - by Ric Pen
    New Apple laptop OSX 10.8.2. I have used OS X but many years previously, and am not familiar with subtleties or changes in com.apple.launchd.peruser.x... I have previously (and in retrospect, foolishly) made changes to these rapidly spawned new peruser accounts (my initial reaction was that if ipfw was disabled, then I might well be under hacker attack, which I have dealt with, years ago), but I believe I was wrong, and the results of my efforts at preserving the system's integrity have in fact been destructive, overreactive, and have resulted in much work to restore. My understanding from other posts is that superuser protocols have changed quite dramatically since I bought the first developer version of OS X many years ago. Haven't developed on Apple much since then, w/ exception of WebObjects (IMO, much underrated at that time, and was more user friendly than ASP (prior to .NET, I vaguely recall). Creation of apparently nasty peruser folders appear to confound 501 process, which logs inability to find firewall (ipfw). Can someone help me with this? I am concerned that either the system is improperly configured, an application was improperly installed (although there is little here beyond Apple's SDK, which I find quite accommodating and intuitive). Still, I am a novice, only sporadically develop at this time, and would really just like to see this system running happily. Please offer assistance, in the form of potential info sources, or if you have had a similar experience, then perhaps scripts to suss out this issue. I do not wish to damage the system, but Apple's Developer connection and discussion threads do not appear to have dealt with this particular issue recently... Although I may well have missed something you have not - please apprise. Any assistance on this issue is very much appreciated - by an old guy, who wants to do some things which were fun about 20 years ago.

    Read the article

  • Method to integrate Powershell scripts with non-Windows workflow?

    - by Matt Simmons
    I love the smell of new machines in the morning. I'm automating a machine creation workflow that involves several separate systems across my infrastructure, some of which involve 15 year old perl scripts on Solaris hosts, PXE Booting Linux systems, and Powershell on Windows Server 2008. I can script each of the individual parts, and integrating the Linux and Unix automation is fairly straightforward, but I'm at a loss as to how to reliably tie together the Powershell scripts to the rest of the processes. I would prefer if the process began on a Linux host, since I imagine that it will end up as a web application living on an Apache server, but if it needs to begin on Windows, I am hesitantly okay with that. I would ideally like something along the lines of psexec for Linux to run against Windows, but the answer in that direction appears to by Cygwin, and as much as I appreciate all of the hard work that they put in, it has never felt right, if you know what I mean. It's great for a desktop and gives a lot of functionality, but I feel like Windows servers should be treated like Windows servers and not bastardized Unix machines (which, incidentally, is my argument against OSX servers, too, and they're actually Unix). Anyway, I don't want to go with Cygwin unless that's the last and only option. So I guess what I'm asking is if there is a way to execute jobs on Windows machines from Linux. Without Cygwin. I'm open to ideas and suggestions, including "Look idiot, everyone uses Cygwin, so suck it up and deal with it". Thanks in advance!

    Read the article

  • How to force mdadm to stop RAID5 array?

    - by lucek
    I have /dev/md127 RAID5 array that consisted of four drives. I managed to hot remove them from the array and currently /dev/md127 does not have any drives: cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdd1[0] sda1[1] 304052032 blocks super 1.2 [2/2] [UU] md1 : active raid0 sda5[1] sdd5[0] 16770048 blocks super 1.2 512k chunks md127 : active raid5 super 1.2 level 5, 512k chunk, algorithm 2 [4/0] [____] unused devices: <none> and mdadm --detail /dev/md127 /dev/md127: Version : 1.2 Creation Time : Thu Sep 6 10:39:57 2012 Raid Level : raid5 Array Size : 8790402048 (8383.18 GiB 9001.37 GB) Used Dev Size : 2930134016 (2794.39 GiB 3000.46 GB) Raid Devices : 4 Total Devices : 0 Persistence : Superblock is persistent Update Time : Fri Sep 7 17:19:47 2012 State : clean, FAILED Active Devices : 0 Working Devices : 0 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 512K Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 2 0 0 2 removed 3 0 0 3 removed I've tried to do mdadm --stop /dev/md127 but: mdadm --stop /dev/md127 mdadm: Cannot get exclusive access to /dev/md127:Perhaps a running process, mounted filesystem or active volume group? I made sure that it's unmounted, umount -l /dev/md127 and confirmed that it indeed is unmounted: umount /dev/md127 umount: /dev/md127: not mounted I've tried to zero superblock of each drive and I get (for each drive): mdadm --zero-superblock /dev/sde1 mdadm: Unrecognised md component device - /dev/sde1 Here's output of lsof|grep md127: lsof|grep md127 md127_rai 276 root cwd DIR 9,0 4096 2 / md127_rai 276 root rtd DIR 9,0 4096 2 / md127_rai 276 root txt unknown /proc/276/exe What else can I do? LVM is not even installed so it can't be a factor.

    Read the article

  • Removing a device in "removed" state from Linux software RAID array

    - by Sahasranaman MS
    My workstation has two disks(/dev/sd[ab]), both with similar partitioning. /dev/sdb failed, and cat /proc/mdstat stopped showing the second sdb partition. I ran mdadm --fail and mdadm --remove for all partitions from the failed disk on the arrays that use them, although all such commands failed with mdadm: set device faulty failed for /dev/sdb2: No such device mdadm: hot remove failed for /dev/sdb2: No such device or address Then I hot swapped the failed disk, partitioned the new disk and added the partitions to the respective arrays. All arrays got rebuilt properly except one, because in /dev/md2, the failed disk doesn't seem to have been removed from the array properly. Because of this, the new partition keeps getting added as a spare to the partition, and its status remains degraded. Here's what mdadm --detail /dev/md2 shows: [root@ldmohanr ~]# mdadm --detail /dev/md2 /dev/md2: Version : 1.1 Creation Time : Tue Dec 27 22:55:14 2011 Raid Level : raid1 Array Size : 52427708 (50.00 GiB 53.69 GB) Used Dev Size : 52427708 (50.00 GiB 53.69 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Intent Bitmap : Internal Update Time : Fri Nov 23 14:59:56 2012 State : active, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Name : ldmohanr.net:2 (local to host ldmohanr.net) UUID : 4483f95d:e485207a:b43c9af2:c37c6df1 Events : 5912611 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 0 0 1 removed 2 8 18 - spare /dev/sdb2 To remove a disk, mdadm needs a device filename, which was /dev/sdb2 originally, but that no longer refers to device number 1. I need help with removing device number 1 with 'removed' status and making /dev/sdb2 active.

    Read the article

  • Windows Phone 7 and WS-Trust

    - by Your DisplayName here!
    A question that I often hear these days is: “Can I connect a Windows Phone 7 device to my existing enterprise services?”. Well – since most of my services are typically issued token based, this requires support for WS-Trust and WS-Security on the client. Let’s see what’s necessary to write a WP7 client for this scenario. First I converted the Silverlight library that comes with the Identity Training Kit to WP7. Some things are not supported in WP7 WCF (like message inspectors and some client runtime hooks) – but besides that this was a simple copy+paste job. Very nice! Next I used the WSTrustClient to request tokens from my STS: private WSTrustClient GetWSTrustClient() {     var client = new WSTrustClient(         new WSTrustBindingUsernameMixed(),         new EndpointAddress("https://identity.thinktecture.com/…/issue.svc/mixed/username"),         new UsernameCredentials(_txtUserName.Text, _txtPassword.Password));     return client; } private void _btnLogin_Click(object sender, RoutedEventArgs e) {     _client = GetWSTrustClient();       var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Bearer)     {         AppliesTo = new EndpointAddress("https://identity.thinktecture.com/rp/")     };       _client.IssueCompleted += client_IssueCompleted;     _client.IssueAsync(rst); } I then used the returned RSTR to talk to the WCF service. Due to a bug in the combination of the Silverlight library and the WP7 runtime – symmetric key tokens seem to have issues currently. Bearer tokens work fine. So I created the following binding for the WCF endpoint specifically for WP7. <customBinding>   <binding name="mixedNoSessionBearerBinary">     <security authenticationMode="IssuedTokenOverTransport"               messageSecurityVersion="WSSecurity11 WSTrust13 WSSecureConversation13 WSSecurityPolicy12 BasicSecurityProfile10">       <issuedTokenParameters keyType="BearerKey" />     </security>     <binaryMessageEncoding />     <httpsTransport/>   </binding> </customBinding> The binary encoding is not necessary, but will speed things up a little for mobile devices. I then call the service with the following code: private void _btnCallService_Click(object sender, RoutedEventArgs e) {     var binding = new CustomBinding(         new BinaryMessageEncodingBindingElement(),         new HttpsTransportBindingElement());       _proxy = new StarterServiceContractClient(         binding,         new EndpointAddress("…"));     using (var scope = new OperationContextScope(_proxy.InnerChannel))     {         OperationContext.Current.OutgoingMessageHeaders.Add(new IssuedTokenHeader(Globals.RSTR));         _proxy.GetClaimsAsync();     } } works. download

    Read the article

  • Create a PDF that defaults to flip on short edge when printed double-sided

    - by user568458
    We're creating a 2-page PDF brochure with a target audience who will print it on their regular office or home printers. If it is printed on a double-sided printer (common in offices), it'll come out correctly if set manually by the user to "Flip on short edge", but will come out with the second page upside down if default settings are used (flip on long edge). Our target audience aren't very tech-literate, and we've found that even within our own office network there is variation in the location of the 'Flip on short edge' setting - so it isn't realistic to give everyone who downloads the PDF instructions on how to change this setting or to expect everyone to find out how to change the setting off their own backs. So, when creating a PDF (ideally using Adobe InDesign or Acrobat, but if other software or hacking is needed that's fine...), is there a way to configure the PDF file itself so that when printed double-sided with default settings, it flips on the short edge? If possible, it'll be useful supplementary info to know how reliable any such methods are across different PDF readers (e.g. Adobe Reader, Acrobat, Mac Preview, inbuilt browser readers (e.g. chrome), FoxIt, etc). If questions about content creation like this aren't a great fit here, feel free to migrate it to the graphic design stackexchange site - this question seems to fall half way between the two sites

    Read the article

  • Domain Trust 2008 to 2003

    - by nick3216
    I'm having trouble setting up the trust relationship between a Windows Server 2003 and a Windows Server 2008 AD. Domain a is Windows Server 2003 Forest functional level. Domain b is a Windows Server 2008 Forest functional level. I can set up the incoming side of the trust relationship on domain "a" so that it trusts domain "b". Try as I might on domain "b" I can't set up the outgoing side of the trust relationship to domain "a". The GUI interface gives an unhelpful 'The request is not supported'. I'm not sure netdom is being more or less helpful as it refers me to FilterSIDs netdom trust /add b /uo:b\admin /po:* /d:a /ud:a\admin /pd:* /oneside:trusting To improve the security of this external trust, security identifier (SID) filtering is enabled, however, if users have been migrated to the trusted domain and their SID histories have been preserved, you may choose to turn off this feature. For more information about SID filtering and how to turn it off, see the help for netdom trust /FilterSids or see Help and Support. The request is not supported. The command failed to complete succesfully. I say 'less helpful' because Windows Server 2008 doesn't support the /FilterSIDs option. How can we force creation of this trust? Edit: Just to clarify I've checked that the [Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options] "Network access: Allow anonymous SID/Name translation” is enabled on both sides of the trust as per http://social.technet.microsoft.com/Forums/en/winserverDS/thread/cc61fc25-3569-4413-bbfd-92390eb31118

    Read the article

  • Software RAID 1 Configuration

    - by Corve
    I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to check so I would be very grateful for some advice or just verification that all seems right so far. I am using Linux Fedora 20 (32 bit with plans to upgrade to 64bit) The RAID 1 should consist of two 1TB SATA hard drives. This is the output of mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Sun Jan 29 11:25:18 2012 Raid Level : raid1 Array Size : 976761424 (931.51 GiB 1000.20 GB) Used Dev Size : 976761424 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Sat Jun 7 10:38:09 2014 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : argo:0 (local to host argo) UUID : 1596d0a1:5806e590:c56d0b27:765e3220 Events : 996387 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 0 1 active sync /dev/sda The RAID is mounted successfully: friedrich@argo:~ ? sudo mount -l | grep md0 /dev/md0 on /mnt/raid type ext4 (rw,relatime,data=ordered) Basically my question are: Why do I only have 1 active device? What does the State removed at bottom mean? Also I noticed some strange error messages that I see on the console on system start and shutdown and always repeating in the background when I switch with Ctrl + Alt + F2: ... ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: COMRESET failed (errno=-32) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ... Are these errors related to the RAID? Something seems wrong with the SATA devices.. All together the system works (I can read and write to the mounted raid) but I always had these strange errors on startup shutdown (probably always in the background). Thx for your help

    Read the article

  • Howto change Axis server-config.wsdd so that we don't expect a SOAPAction

    - by GKForcare
    The problem I'm facing is that the client of my service will never send me a SOAPAction header. How can I tell Axis to still map to the incomming call to my service implementation anyway. I did bump into tricks like adding a Handler like this: <handler name="ReportMapper" type="java:com.mycompany.project.ReportMapper"/> <transport name="http"> <requestFlow> <handler type="ReportMapper"/> <handler type="URLMapper"/> <handler type="java:org.apache.axis.handlers.http.HTTPAuthHandler"/> </requestFlow> <parameter name="qs:list" value="org.apache.axis.transport.http.QSListHandler"/> <parameter name="qs:wsdl" value="org.apache.axis.transport.http.QSWSDLHandler"/> <parameter name="qs.list" value="org.apache.axis.transport.http.QSListHandler"/> <parameter name="qs.method" value="org.apache.axis.transport.http.QSMethodHandler"/> <parameter name="qs:method" value="org.apache.axis.transport.http.QSMethodHandler"/> <parameter name="qs.wsdl" value="org.apache.axis.transport.http.QSWSDLHandler"/> </transport> but that did not help. The mapper is found during the creation of the WSDL but when calling the service, the invoke of the handler is not used. I do need to note that when I simulate the SOAP-call using @curl@ and I do add the SOAPAction header, the invoke is called. Any help would be most appreciated.

    Read the article

  • Improving performance by using an additional static file server

    - by Max
    Hello there, I´m planning for a large website that includes many static assets (js, css, images and thumbnails) in the generated pages. That website will use TYPO3 as CMS (is is a customer requirement). I guess I could seriously improve performance / page load times by using a two server setup. One server where the main application (PHP) runs and another one where the static files sit being served by a trimmed down version of apache or something like lighthttpd. Including e. g. js or css files from the file server is of course no big deal. Just use an absolute url http://static.example.com/js/main.js and be done with it. But: that website will have pages with MANY thumbnails of e. g. product images on it. So I see two problems when the main application tries to create a thumbnail of some image: the original image like products/some.jpg is uploaded on the static file server and therefore not on the same server as the PHP application which tries to create the thumbnail. TYPO3 writes created thumbnails to a temp directory which is expected to be on the same server. Therefore, hundreds of thumbnails will be written and served from that temp directory which is on the same server as the main application - the static file server is in that case basically useless, all thumbnails will be requested from the server of the main application. So, my question is: how to overcome this shortcomings? Is it possible to "symlink" some directories to another server? So, for example, if PHP tries to open the original products image for thumbnail creation with imagecreate("products/some.jpg") the products folder actually "points" to the products folder on the static image server? I know something like this can be done with .htaccess but is it possible on file system level?

    Read the article

  • Converting Audio To Video Output and Attaching Text?

    - by ZeeMan
    I am currently working on a project and before i get started i thought it'd be nice to check with stackOverflow community, and see maybe they can help me with this. The Idea: I have about a thousand MP3 files that i need to convert into Video files to be upload on Youtube for my work. Here is where it gets tricky i need to also attach the Text associated with the Audio to the Video as an Image. I was thinking .ppt. The Problem: I can do this one audio file at a time but it would take me a zillion years. lol!! The Question: Can I Create Some Kind Of Program Using Let's Say XML or JavaScript Or XHTML or some other programming language to do a MASS content creation and all i have to do is feed it the Information?? possibly a script?? or is it possible to create an example .ppt file and then hack it so that i can have it reproduce itself with different information?? The Note: Thanks U In Advance For Helping Out!!! Regards, ZeeMan!!!

    Read the article

  • Issue with InnoDB engine while enabling and [ skip-innodb ]

    - by Ahn
    How to enable InnoDB, which was previously disabled with skip-innodb option. Case 1: Disabled the innodb with skip-innodb option and show engines givens as below. Engine | Support ... | InnoDB | NO ...... Case 2: As I want to enable the innodb, I commanded the #skip-innodb option and restarted. But now the show engines even not showing the InnoDB engine in the list. ? Mysql Version : 5.1.57-community-log OS : CentOS release 5.7 (Final) Log: 120622 13:06:36 InnoDB: Initializing buffer pool, size = 8.0M 120622 13:06:36 InnoDB: Completed initialization of buffer pool InnoDB: No valid checkpoint found. InnoDB: If this error appears when you are creating an InnoDB database, InnoDB: the problem may be that during an earlier attempt you managed InnoDB: to create the InnoDB data files, but log file creation failed. InnoDB: If that is the case, please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/error-creating-innodb.html 120622 13:06:36 [ERROR] Plugin 'InnoDB' init function returned error. 120622 13:06:36 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 120622 13:06:36 [Note] Event Scheduler: Loaded 0 events 120622 13:06:36 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.57-community-log' socket: '/data/mysqlsnd/mysql.sock1' port: 3307 MySQL Community Server (GPL)

    Read the article

  • How to display/define Mirror/Stripping pairs with mdadm

    - by Chris
    I want to make a standard linux software Raid10 over 4 HDD. The server has 4HDDs, 2 pairs from different vendors in order to avoid batch problems. I want to have the mirror over two different Vendors, and then the Stripe over the mirror pairs. I could do that by manually creating Raid1/0, but mdadm supports Raid level 10. I just cant figure out how the Raid10 is then handled and how the data is distributed. mdadm --detail /dev/md10 /dev/md10: Version : 1.2 Creation Time : Wed May 28 11:06:23 2014 Raid Level : raid10 Array Size : 1953260544 (1862.77 GiB 2000.14 GB) Used Dev Size : 976630272 (931.39 GiB 1000.07 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Wed May 28 11:06:23 2014 State : clean, resyncing (PENDING) Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 512K Name : pdwhost:10 (local to host pdwhost) UUID : a3de0ad5:9e694ee1:addc6786:c4449e40 Events : 0 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 81 1 active sync /dev/sdf1 2 8 97 2 active sync /dev/sdg1 3 8 113 3 active sync /dev/sdh1 does not really give any information about that. How it should be: Raid 1 / Mirror over /dev/sda1 /dev/sdf1 and /dev/sdg1 /dev/sdh1 Raid 0 over the two Raid 1 pairs Is it possible to do that with the built in "level=10", how can I see what pairs are mirrored? Thanks a lot for you help

    Read the article

  • Windows Explorer and UAC: run elevated

    - by syneticon-dj
    I am profoundly annoyed by UAC and switch it off for my admin user wherever I can. Yet, there are situations where I can't - especially if those are machines not under my continuous administration. In this case, I am always challenged with the task of traversing directories using my administrative user via the Windows Explorer where regular users do not have "read" permissions. The possible two approaches to this problem so far: change the ACLs to the directory in question to include my user (Windows conveniently offers the Continue button in the "You don't currently have permissions to access this folder" dialog. This obviously sucks since more often than not I do not want to change ACLs but just look into the folder's contents use an elevated cmd.exe prompt along with a bunch of command line utilities - this usually takes a lot of time when browsing through large and / or complex directory structures What I would love to see would be a way to run Windows Explorer in elevated mode. I have yet to find out how to do so. But other suggestions solving this problem in an unobtrusive way without changing the entire system's configuration (and preferably without the need for downloading / installing anything) are very welcome, too. I have seen this post with a suggestion for altering HKCR - interesting, but it changes the behavior for all users, which I am not allowed to do in most situations. Also, some folks have suggested using UNC paths to access the folders - unfortunately this does not work when accessing the same machine (i.e. \\localhost\c$\path) as the "Administrators" group membership is still stripped from the token and a re-authentication (and thus the creation of a new token) would not happen when accessing localhost.

    Read the article

  • Intell SSD + Win 7 after crash can not repair, can not re install

    - by Ori
    I have Lenovo w520, after i bought it i took away old hhd (no longer with me) and replaced it with intel ssd, it worked perfectly for 1 year or so, today my system fr0ze and after waiting for some time i didi hard reset - it wasn't able to boot anymore at all, i do not see any messages from windows ever, it only loads Intel boot utility that suggests to pick one of 3 devices to boot, it has my hdd there but nothing happens. /I dont have recovery tools from lenovo since i moved to another country, i got win 7 cd from a friend (came with his laptop) abd if in bios i have AHCI - it doesnt see my ssd, if compatible mode - it sees it but format not available, partition creation gives b\me 8007045 error. I tried diskpart, in compatible mode it sees my disk but doesnt do recover or clean all, also win 7 disk tools dont do anything if i try to do boot fix... I am ok with erasing it but i seem not to be able too, i jus tneed the machine to wpork asap, all my files are on external drives so i dont care about formatting. please help! I am given a very old machine by a friend so i am able to browse internet... it is under XP...

    Read the article

  • Backup data from RAID 1 disk out of its server

    - by Doomsday
    I'm facing with a pretty easy problem in my opinion. I've extracted a working disk from a RAID1 and I'm looking to copy only data (FS and RAID configuration doesn't matter) into another location (another FS). My problem is I'm not able to mount properly this disk into another linux. I've first looked the partition table : # fdisk -l /dev/sdc Disk /dev/sdc: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 63 1249535699 624767818+ fd Linux raid autodetect /dev/sdc2 1249535700 1250017649 240975 fd Linux raid autodetect /dev/sdc3 1250017650 1250258624 120487+ 82 Linux swap / Solaris I've understood I should use dmraid tools. Once installed : # cat /proc/mdstat Personalities : md0 : inactive sdc1[1](S) 624767744 blocks unused devices: <none> And some other informations : # mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 8f292f54:7e5aef72:7e5ab5fd:b348fd05 Creation Time : Mon Jun 2 03:39:41 2008 Raid Level : raid1 Used Dev Size : 624767744 (595.82 GiB 639.76 GB) Array Size : 624767744 (595.82 GiB 639.76 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Update Time : Tue Feb 7 22:34:59 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : a505b324 - correct Events : 15148 Number Major Minor RaidDevice State this 1 8 1 1 active sync /dev/sda1 0 0 8 17 0 active sync /dev/sdb1 1 1 8 1 1 active sync /dev/sda1 From here, I've tried to mount but I'm not comfortable with dmtools and how it's working. # mount /dev/sdc1 /mnt/sdc1 mount: unknown filesystem type 'linux_raid_member' # mount /dev/md0 /mnt/sdc1 mount: /dev/md0: can't read superblock I've seen some options to alter RAID array with mdadm but I only want to copy data on its filesystem before wiping them... Anyone has a clue ?

    Read the article

  • Ubuntu network card problem.

    - by Steve Greene
    Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

    Read the article

  • GameStateManagement and inputs not being recognized

    - by Dave Voyles
    EDIT: I've removed a bit of code from the input class to make this more readable, and updated my StartScreen class, which is now at the bottom. I have the same issues though, but they are explained in my comments on the bottom of this page. It won't let me paste my additional code here (the format comes out crazy), so I've linked to pastebin with the code pastebin I've been trying to implement the MS provided GameStateManagement sample with my game, but it has proven a bit difficult. Really, I'm using Oneksoft's Starter Kit, which uses the MS provided sample, so they are identical, except for my splash screen. I'm able to get the splash screen to launch, where it informs the player to press A to advance the screen, but this doesn't seem to accept any of my inputs. I’ve also added Console.Writeline(“Pressing A”) under the IsMenuPressed method in Input.cs to verify that it is getting called, but for some reason it is constantly spamming my log, rather than just appearing each time I press it. Not sure why this is happening. I have a bit too much code to post it all here, so I’ve attached a link to my .rar with my classes, but I’ll also leave a bit here which I thinkmay be applicable. https://www.dropbox.com/sh/6ek4uru2jc2ch0k/JTeBWN_3PQ What do you guys think the issue is? namespace Pong { public class Input { public const int MaxInputs = 4; public readonly KeyboardState[] CurrentKeyboardState; public readonly GamePadState[] CurrentGamePadState; public KeyboardState[] LastKeyboardState; public GamePadState[] LastGamePadState; public readonly bool[] GamePadWasConnected; public Input() { // Get input state CurrentKeyboardState = new KeyboardState[MaxInputs]; CurrentGamePadState = new GamePadState[MaxInputs]; // Preserving last states to check for isKeyUp events LastKeyboardState = CurrentKeyboardState; LastGamePadState = CurrentGamePadState; } /// <summary> /// Checks for a "menu select" input action. /// The controllingPlayer parameter specifies which player to read input for. /// If this is null, it will accept input from any player. When the action /// is detected, the output playerIndex reports which player pressed it. /// </summary> public bool IsMenuSelect(PlayerIndex? controllingPlayer, out PlayerIndex playerIndex) { Console.WriteLine("Pressing A"); return IsNewKeyPress(Keys.Space, controllingPlayer, out playerIndex) || IsNewKeyPress(Keys.Enter, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.A, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.Start, controllingPlayer, out playerIndex); } /// <summary> /// Checks for a "menu cancel" input action. /// The controllingPlayer parameter specifies which player to read input for. /// If this is null, it will accept input from any player. When the action /// is detected, the output playerIndex reports which player pressed it. /// </summary> public bool IsMenuCancel(PlayerIndex? controllingPlayer, out PlayerIndex playerIndex) { return IsNewKeyPress(Keys.Escape, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.B, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.Back, controllingPlayer, out playerIndex); }

    Read the article

  • file system that allow to specify different RAID level per directory and change it afterward

    - by Adam Ryczkowski
    I have 5 hard drives, where I want to keep my data. Some of my files are more important, and some of them are less. So some of them I wish to put on RAID-6, and for some it RAID-5 is sufficient. It is difficult to predict at the moment of creation of the arrays how much space of each type to declare. What I would do if I didn't hear about zfs, is partition the hard drives into identical 100GB partitions, and as my needs grow, assemble those partitions into md devices using linux-raid. Then, I'd combine those devices using lvm into logical volumes where I'd put my data. So when I'd need more space of e.g. RAID-6, I'd take 100GB partition from each hard drive and assemble them into another RAID-6 md device and would use it as physical storage for the logical volume group dedicated for RAID-6 data. Then I could grow the file system on this logical volume. On top of RAID-6 and RAID-5 Volume Groups (managed by lvm) would reside completely independent file systems, which I'd later merge with multiple mount --bind into a single directory structure that would reflect the logical structure of data rather that of the storage. But now, when I heard about the ZFS with all the performance, data-healing and compression capabilities I cannot stop thinking if it can help me. If so, what do you think would be the best setup?

    Read the article

  • RAID degraded on Ubuntu server

    - by reano
    We're having a very weird issue at work. Our Ubuntu server has 6 drives, set up with RAID1 as follows: /dev/md0, consisting of: /dev/sda1 /dev/sdb1 /dev/md1, consisting of: /dev/sda2 /dev/sdb2 /dev/md2, consisting of: /dev/sda3 /dev/sdb3 /dev/md3, consisting of: /dev/sdc1 /dev/sdd1 /dev/md4, consisting of: /dev/sde1 /dev/sdf1 As you can see, md0, md1 and md2 all use the same 2 drives (split into 3 partitions). I also have to note that this is done via ubuntu software raid, not hardware raid. Today, the /md0 RAID1 array shows as degraded - it is missing the /dev/sdb1 drive. But since /dev/sdb1 is only a partition (and /dev/sdb2 and /dev/sdb3 are working fine), it's obviously not the drive that's gone AWOL, it seems the partition itself is missing. How is that even possible? And what could we do to fix it? My output of cat /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sda2[0] sdb2[1] 24006528 blocks super 1.2 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 1441268544 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[0] 1464710976 blocks super 1.2 [2/1] [U_] md3 : active raid1 sdd1[1] sdc1[0] 2930133824 blocks super 1.2 [2/2] [UU] md4 : active raid1 sdf2[1] sde2[0] 2929939264 blocks super 1.2 [2/2] [UU] unused devices: <none> FYI: I tried the following: mdadm /dev/md0 --add /dev/sdb1 But got this error: mdadm: add new device failed for /dev/sdb1 as 2: Invalid argument Output of mdadm --detail /dev/md0 is: /dev/md0: Version : 1.2 Creation Time : Sat Dec 29 17:09:45 2012 Raid Level : raid1 Array Size : 1464710976 (1396.86 GiB 1499.86 GB) Used Dev Size : 1464710976 (1396.86 GiB 1499.86 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 15:55:07 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : lia:0 (local to host lia) UUID : eb302d19:ff70c7bf:401d63af:ed042d59 Events : 26216 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 1 removed

    Read the article

  • How do I do a mail merge that includes images?

    - by Ian Ringrose
    I am trying to find out the practicalities of doing a mail merge when each “record” to be merged on includes some images. I need to: print letters And envelopes Both the letters and the envelopes have: Fixed text Fixed images Text that come from the mail merge record Images that come from the mail merge record I don’t know if all images will be the same size for every record, so a bit of simple “on the fly” automatic formatting may be needed . I need to be able to repeat a single item if I get a problem (e.g when folding the letter). What problems am I likely to have? Is Word 2007 up to this sort of mail merging, or should I be looking at a report writing tool? How do I restart a print run after a printer jam etc? What format should I store the “records” and there images in? E.g Can standard software cope with images that are stored in separate files named after the “CustomerId” that is in the “record” (I can write custom software if needed, but would rather use standard “of-the-shelf” software for the printing, I am planning on custom software for the data creation, so can output in whatever format is needed)

    Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >