Search Results

Search found 3500 results on 140 pages for 'plug ins'.

Page 119/140 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

• Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

  - by Lucas

  I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

  Read the article

• Site Review: Facebook.com and Blockbuster.com - Navigation Schemes

  After cycling through a list of my favorite sites I decided to select Facebook.com and Blockbuster.com for this  post because I found their navigation schemes very intuitive. Facebook in my opinion took a very simplistic and minimalistic approach when they designed their site and its navigation. For example, when you login to your account you will find on the upper left hand side a generic section of the site common areas to all users like news, messages, events, photos and friends. Below this in a separate navigation menu is a list of applications that a user has elected to access through bookmarks. Finally in the upper right hand corner of the site contains links to administer the user’s account like account settings, public profile, and a link back to the users’ home page. Blockbuster on the other had tried to make site navigation a little more slick by using a menu-submenu approach to navigation where user can click on things like Rent, Buy, On Demand, Games, Stores, and Gifts and a submenu of corresponding items appears below the original menu item. In addition they also took this approach and added categorized lists of movies that they offer on the homepage so that users can click on an item like “DVD Spotlight” and a list of movies represented as actual DVD box cases appear on the user’s screen so they can scroll through the list by using left and right arrows on either side of the images displayed. Both Facebook and Blockbuster have more than one navigation groupings because their respected sites are so large and offer an absorbent amount of features. Because of this reason they have to group the main functionality of information in to logical groups based on their actions they perform and the access to specific information. For example it would not make sense for Facebook to include a particular game you like to play within your account with a section pertaining to account administration. The game link would be completely out of place and really confuse the users experience because the groupings where not logically grouped. In addition I think that Facebook users would benefit if Facebook allowed its users to specify what they want on the general navigation from within their site or at least create a section to show frequently accessed pages or favorite sections. Finally regarding additional navigation, I think blockbuster users really benefit from the submenu system of categorizing data, and if fact Blockbuster even allows them to refine the information they are looking for through the use of secondary submenu systems allowing users to really drill down in to what they are looking for to learn more on. I do not think that having more than one navigation bar on a web page is not confusing for the user. For example if you have a navigation bar at the top of your page and at the bottom will allow users to move around the website easier because they can utilize the navigation closest to where their cursor is on the page. In regards to designers forcing all the navigation in to one navigation bar, I think it would be hard for the user to fully understand what is going on based on the size and complexity of the site they are dealing with. For example Blockbuster has a ton of content that could not easily be put in to one navigation bar. From my experience with both Facebook and Blockbuster, they both do a good job with cross browser compatibility. I have had no issues with either site in IE, Firefox, Chrome, and Safari over the years. In addition, I do not believe that either Facebook or Blockbuster require any additional plug-in to utilize their navigation bars.

  Read the article

• Tweaking Remote Control (In-Kernel LIRC)

  - by Geoff

  I've recently rebuilt my MythTV box using Mythbuntu 12.04, to take advantage of newer hardware (Ivy Bridge). On my previous build I used lirc to manage the remote, i.e. the mapping of key codes - keypresses - application keys; it was quite a journey to learn it all, and I ended up fairly comfortable with how it all worked. What I have: I have a cheap Chinavasion remote and USB dongle, which I've found several articles on; these largely revolve around working with XBMC (interesting, but I don't think directly applicable) and also around getting a Harmony remote to work (it's a Chinavasion CVSB-983 - very useful, since I needed this to get my Harmony 900 working). Mythbuntu 12.04 64-bit MythTV 0.25 (likely irrelevant) How it is right now When I plug this in, it 'just works'. Which is great, except that Ubuntu uses it natively, and prevents some of the button presses from getting through to Myth. For example, I can send a button from the remote that equates to Ctrl-Alt-A (which I assume Ubuntu isn't interested in), and then trap that in Mythfrontend, but the remote's Play button is caught by Ubuntu (which displays a large circle with a line though it, as there's no media player loaded). I understand that this is because lirc is merged into the kernel now, and I like that. What I've done so far: Found the device using lsusb: $ lsusb Bus 001 Device 004: ID 073a:2230 Chaplet Systems, Inc. infrared dongle for remote Found the event device number: $ cat /proc/bus/input/devices I: Bus=0003 Vendor=073a Product=2230 Version=0110 N: Name="HID 073a:2230" P: Phys=usb-0000:00:1a.0-1.2/input0 S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5 U: Uniq= H: Handlers=sysrq kbd mouse1 event5 js0 B: PROP=0 B: EV=10001f B: KEY=4c37fff072ff32d bf54445600000000 ffffffffff 30c100b17c007 ffa67bfad951dfff febeffdfffefffff fffffffffffffffe B: REL=343 B: ABS=100030000 B: MSC=10 Tested the input with evtest (I pressed Play): $ sudo evtest /dev/input/event5 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x73a product 0x2230 version 0x110 Input device name: "HID 073a:2230" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 1 (KEY_ESC) Event code 2 (KEY_1) Event code 3 (KEY_2) Event code 4 (KEY_3) Event code 5 (KEY_4) Event code 6 (KEY_5) Event code 7 (KEY_6) <------------snipped lots of 'Event code' lines------------> Testing ... (interrupt to exit) Event: time 1336435683.230656, -------------- SYN_REPORT ------------ Event: time 1336435683.246648, type 4 (EV_MSC), code 4 (MSC_SCAN), value c00cd Event: time 1336435683.246652, type 1 (EV_KEY), code 164 (KEY_PLAYPAUSE), value 0 Event: time 1336435683.246655, -------------- SYN_REPORT ------------ Tested showkey, again for the Play key: $ sudo showkey -s kb mode was RAW [ if you are trying this under X, it might not work since the X server is also reading /dev/console ] press any key (program terminates 10s after last keypress)... 0xe0 0x22 0xe0 0xa2 What I want: I'd like a way to scan the incoming button presses, if the above method isn't correct. I'd like to either remap each button press to something that Ubuntu/Unity will ignore, or even better pass the keypress directly to Myth (I suspect this later is only possible with lirc, but I could be wrong). I would really like to do this with the in-kernel drivers, i.e. without explicitly loading lirc; if that's the way the world is going, I'd rather find a way to map the current behaviour to what I want, rather than forcing the 'old' arrangement of loading lirc outside the kernel. Learning something new is also worthwhile! My guess: I'm assuming that this will require using setkeycodes, but have had trouble finding enough information to configure this. Any help greatly appreciated!

  Read the article

• WIF, ASP.NET 4.0 and Request Validation

  - by Your DisplayName here!

  Since the response of a WS-Federation sign-in request contains XML, the ASP.NET built-in request validation will trigger an exception. To solve this, request validation needs to be turned off for pages receiving such a response message. Starting with ASP.NET 4.0 you can plug in your own request validation logic. This allows letting WS-Federation messages through, while applying all standard request validation to all other requests. The WIF SDK (v4) contains a sample validator that does exactly that: public class WSFedRequestValidator : RequestValidator {     protected override bool IsValidRequestString(       HttpContext context,       string value,       RequestValidationSource requestValidationSource,       string collectionKey,       out int validationFailureIndex)     {         validationFailureIndex = 0;         if ( requestValidationSource == RequestValidationSource.Form &&              collectionKey.Equals(                WSFederationConstants.Parameters.Result,                StringComparison.Ordinal ) )         {             SignInResponseMessage message =               WSFederationMessage.CreateFromFormPost(context.Request)                as SignInResponseMessage;             if (message != null)             {                 return true;             }         }         return base.IsValidRequestString(           context,           value,           requestValidationSource,           collectionKey,           out validationFailureIndex );     } } Register this validator via web.config: <httpRuntime requestValidationType="WSFedRequestValidator" />

  Read the article

• How to center and scale Silverlight applications using ViewBox control

  - by Jacek Ciereszko

  There are many ways to make your application scalable in Web Browser window and align it in the center. Usually we use two Grid controls to align and panel control (like Canvas) to scale our apps. Not the best solution <UserControl … >     <Grid x:Name="LayoutRoot" Background="White">         <Grid HorizontalAlignment="Center" VerticalAlignment="Center">             <Canvas x:Name="scalePanel" VerticalAlignment="Top" HorizontalAlignment="Center">                 …             </Canvas>         </Grid>     </Grid> </UserControl>               The example above usually works but there are better ways. How? Use ViewBox. ViewBox control contains scale mechanisms with some stretching options. So ViewBox together with Grid control is all what we need to align and scale our applications. Good solution <UserControl … >     <Grid x:Name="LayoutRoot" Background="White">         <Viewbox>             ...         </Viewbox>     </Grid> </UserControl> How to find ViewBox control For those applications created in Silverlight 4, ViewBox is available in plug-in. For applications created in Silverlight 3 you can find it in Microsoft Silverlight Toolkit. Demo Let’s create a simple application that will contain: Button, TextBlock and red Rectangle. It will also have some Margin settings. This application won’t be in the center of window and it will not scale. <UserControl … >     <Grid x:Name="LayoutRoot">         <Grid Margin="100, 50, 100, 20">                 <StackPanel Orientation="Horizontal">                     <Button Width="100" Height="100" Content="test"/>                     <TextBlock Text="Button" Width="100" Height="100" />                     <Rectangle Width="100" Height="100" Fill="Red"/>                 </StackPanel>         </Grid> </Grid> </UserControl>   Run demo: RUN But If we use ViewBox control, we will got centered and always scaled application.    <Grid x:Name="LayoutRoot">         <Viewbox>             <Grid Margin="100, 50, 100, 20">                     <StackPanel Orientation="Horizontal">                         <Button Width="100" Height="100" Content="test"/>                         <TextBlock Text="bottom" Width="100" Height="100" />                         <Rectangle Width="100" Height="100" Fill="Red"/>                     </StackPanel>             </Grid>         </Viewbox>     </Grid> Link to application: RUN (try to resize application’s window) Link to source code: SilverlightCenterApplication.zip References ViewBox for Silverlight 3 http://silverlight.codeplex.com/    Polish version: http://jacekciereszko.pl/2010/05/jak-wysrodkowac-i-skalowac-aplikacje.html Jacek Ciereszko

  Read the article

• I got my z-5 Logitech speakers to work, but whenever I restart, I have to reconfigure them

  - by The Bill

  This is the content of my alsa-base.conf file (for some reason, the entries preceded by # are bolded--anyway): autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 alias snd-card-0 snd-usb-audio alias snd-card-1 snd-hda-intel options snd-usb-audio index=0 options snd-hda-intel index=1 Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 options snd-usb-audio index=-2 options snd-usb-audio index=0 alias snd-card-0 snd-usb-audio alias snd-card-1 snd-hda-intel options snd-hda-intel index=1 I deleted a line that said something like "#Keep usb-audio from being loaded as first soundcard" and that made the speakers work for the first time (before this, they never showed up). I also added the last four lines. Anyway, what can I add to this so that I don't have to reconfigure them each time I restart? Currently, I have to open Sound Settings, then under the hardware tab, select Analog Stereo Output, and then unplug my USB speakers and plug them back in. This makes them pop up so that I can see them. Otherwise, it will not show my Z-5 speakers as a device that can be configured.

  Read the article

• Impressions of my ASUS eee slate EP121 - Dual core 4GB, 64GB SSD

  - by tonyrogerson

  This thing is lovely, very nice bluetooth keyboard that has nice feedback on the keypress, there is no mouse but you can use the stylus or get yourself a bluetooth mouse, me, I've opted for a Microsoft ARC mouse which is a delight to use, the USB doors are a pain to open for the first time if like me you don't have any finger nails. It came as a suprise that the slate shows four processors, Dual Core with multi-threading, I didn't really look at the processor I was more interested in the amount of memory and the SSD; you don't get the full 4GB even with the 64 bit version of Windows 7 installed (which I immediately upgraded to Ultimate through my MSDN subscription). The box is extremely responsive - extremely, it loads Winword in literally a second. I've got office 2010 and onenote 2010 on there now; one problem is that on applying all (43) windows updates since the upgrade the machine is still sat on step 3 of 3 on the start up configuring updates screen after about an hour, you can't turn this machine off without using a paper clip to reset it and as I have just found you need a paper clip :). Installing Windows 7 SP1 was effortless. One of the first things I did on it was to reduce the size of the font, by default its set at 125%, my eye sight is ok :) so I've set that back down. Amazon Kindle for the PC works really well, plenty of text on the screen when viewed portrait, the case it comes with also allows the slate to stand up in various positions - portrait, horizontal - seems stable enough. The wireless works well, seems to have a better signal than my other two laptop machines which is good news. The gadget passed the pose test at work :). I use offline files to keep a copy of all my work stuff locally, I'm not sure what it is, well, its probably my server but whenever I try and sync it runs for a couple of minutes then fails with network name no longer contactable, funnily enough its fine from my big laptop so I can only guess this may be a driver type issue on the EP121 itself - very odd and very annoying. I do a lot of presenting and need to plug into a VGA project because most sites that's all that is offered, the EP121 has a mini-hdmi output which is great except for this scenario, hdmi is digital, vga is analogue, you will struggle to find a cost effective solution, I found HDFury and also a device HP do, however, a better solution appears to be getting a USB graphics adapter for instance the one I've ordered is the ClimaxDigital USB 2.0 to DVI,VGA or HDMI Adaptor which gives everything I need - VGA and DVI output and great resolution as well - ok, so fingers crossed because I'm presenting next Wednesday in Edinburgh and not taking my 300kg lenovo w700 (I'm sure my back just sighed in relief) - it certainly works really well on my LED TV, the install was simple - it just works! One of the several reasons for buying this piece of kit was to use it on my LED TV to remote into my main machine to check stuff whilst sat in my living room, also to watch webcasts and lecture videos in comfort away from my office, because of the wireless speed and limitation I'm opting for a USB network adapter from Belkin - that will also allow me to take advantage of my home gigabit network, there are only 2 usb ports on the slate so I'm going to knock up a hub so connecting it in is straight forward and simple, I'm also going to purchase a second power supply so I don't have to faff about with that either.I now have the developer x64 edition of SQL Server 2008 R2, yes everything :) - about 16GB left to play with on the machine now but that will be fine, I'll put AdventureWorks on there so I can play and demo stuff which is all I'm after from this, my development machine is significantly more powerful and meets my storage needs too.Travel test this weekend and next week, I'm in Dundee for my final exam for the masters degree.

  Read the article

• Use Twitter in Windows Media Center with TwitterMCE

  - by DigitalGeekery

  Are you a Media Center user who just can’t get enough Twitter? If so, you may want to check out the TwitterMCE plugin for Windows Media Center. Download and install TwitterMCE application. (See download link below) When you start Windows Media Center, you’ll find the TwitterMCE icon listed in the Extras. When you open the plug-in you’ll be prompted for a Paypal donation and have to wait out the 15 second timer. Next, you’ll need to log in to your Twitter account. Enter your Twitter account username and password. You can do this with the keyboard or by entering letters and numbers with a Media Center remote. When you are finished, select the Login button.   You’ll be prompted to select Standard or Video Mode. Standard displays items in a more vertical fashion. Video displays them horizontally and one at a time, and also allows you to watch Live TV, a movie, or video at the same time. Reading Your Tweets Clicking on Home allows you to read the latest Twitter messages from your friends. You can access the previous 20 tweets. Scroll up and down to see additional messages in Standard mode, ro right and left in Video mode. Click on the individual Twitter messages to get more information, such as which friend sent the tweet. Create a Tweet To Create a Tweet directly from Media Center, select the Update button. Type out your message using your keyboard or your remote and the on-screen keyboard. When you are finished, select Update to send your Twitter message. A few moments later your new tweet will appear.   To send a tweet while you are watching TV or a video, log in to the TwitterMCE app, choose the Video mode, and select Update.   Enter your tweet with the remote or keyboard. Select Update to send the tweet.   You can also view Mentions, Friends, and Followers selecting the appropriate button.   Scroll through your list of friends to read their latest tweets.   The TwitterMCE plugin works will Windows Vista Premium, Ultimate, and Windows 7. It might not completely replace your favorite Twitter App, but it will allow you to send all the tweets you want without having to take your eyes off your favorite TV programs. Download TwitterMCE Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Schedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program GuideIntegrate Boxee with Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday

  Read the article

• Oracle OpenWorld Update: Demo Pods and Hands-on Labs

  - by Doug Reid

  0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Less than one week away until the start of Oracle OpenWorld 2012 and the Data Integration Solutions team is ready to go!  We have an exciting line up for you this year which we have summarized for you in the Oracle OpenWorld Focus on Data Integration Solutions document. In past posts we have discussed session themes and our customer panel, but today I would like to summarize our Hands-on Labs and Demo Pods that we have available for attendees. For Oracle GoldenGate Hands-On Labs we have two labs that we are running this year. Deep Dive into Oracle GoldenGate Thursday October 4th at 11:15AM in the Marriott Marquis Salon 1/2 Oracle GoldenGate provides real-time log-based change data capture and delivery between heterogeneous systems. It enables cost-effective, low-impact, real-time data integration and continuous availability solutions. This session covers Oracle GoldenGate 11g’s internal product architecture and includes a hands-on lab that covers configuration examples for target database instantiation and real-time change data capture and delivery. The participants will configure Oracle GoldenGate to instantiate a secondary database that can be used for disaster recovery or a reporting instance. Come learn how easy it is to use and how this can be a very valuable and easy technology solution for your organization. Introduction to Oracle GoldenGate Veridata Wednesday October 3rd 10:15AM in the Marriott Marquis Sales 1/2 Oracle GoldenGate Veridata compares one set of data with another and identifies data that is out of synchronization. In this hands-on lab, you will be introduced to the key features of this product. Using the Oracle GoldenGate Veridata Web client, you will have the opportunity to configure comparison objects and rules, initiate a comparison, review the status and output of a comparison, and review out-of-sync data. As a bonus this year, we have recorded the labs and made them available on youtube.com/oraclegoldengate. These will be available the day of the labs. Our demo pods are an opportunity for attendees to see our products but more so to meet the product management and development teams. I would like to point out that we have two Oracle GoldenGate 11gR2 demo pods, one in the database camp and the other in the middleware camp. The one in the middleware camp will be focused on all platforms while the one in the database camp will have a focus on the Oracle platform. The other two I would like to point out are the Monitoring Oracle GoldenGate and the Oracle Enterprise Manager demo pods; both of these pods will focus on methods to monitor GoldenGate but the OEM demo pod will have a specific focus on the Oracle GoldenGate Management Pack plug-in for OEM. Below is a list of our demo pods and their locations. Monitoring Oracle GoldenGate for End-to-End Visibility Moscone South, Right - S-241 Oracle Data Integrator and Oracle GoldenGate for Oracle Applications Moscone South, Right - S-240 Oracle GoldenGate 11gR2 New Features Moscone South, Right - S-239 Oracle GoldenGate 11gR2: Real-Time, Transactional Database Replication     Moscone South, Left - S-027 Oracle GoldenGate Veridata and Adapters Moscone South, Right - S-242 Oracle Enterprise Manager Moscone South, Left - S-040 Keep tuned to our blog during the show for news and highlights from the Data Integration Solutions team. See you there.

  Read the article

• NHibernate 3.0 and FluentNHibernate, how to get up and running&hellip;.

  - by DesigningCode

  First up. Its actually really easy. I’m not very religious about my DB tech, I don’t really care, I just want something that works.  So I’m happy to consider all options if they provide an advantage, and recently I was considering jumping from NHibernate to EF 4.0.  However before ditching NHibernate and jumping to EF 4.0 I thought I should try the head version of NHibernates trunk and the Head version of FluentNHibernate. I currently have a “Repository / Unit of Work” Framework built up around these two techs.  All up it makes my life pretty simple for dealing with databases.   The problem is the current release of NHibernate + the Linq provider wasn’t too hot for our purposes.  Especially trying to plug it into older VB.NET code.   The Linq provider spat the dummy with VB.NET lambdas.  Mainly because in C# Query().Where(l => l.Name.Contains("x") || l.Name.Contains("y")).ToList(); is not the same as the VB.NET Query().Where(Function(l) l.Name.Contains("x") Or l.Name.Contains("y")).ToList VB.NET seems to spit out … well…. something different :-) so anyways… Compiling your own version of NHibernate and FluentNHibernate.  It’s actually pretty easy! First you’ll need to install tortisesvn NAnt and Git if you don’t already have them.  NHibernate first step, get the subversion trunk https://nhibernate.svn.sourceforge.net/svnroot/nhibernate/trunk/ into a directory somewhere.  eg \thirdparty\nhibernate Then use NAnt to build it.   (if you open the .sln it will show errors in that  AssemblyInfo.cs doesn’t exist ) to build it, there is a .txt document with sample command line build instructions,  I simply used :- NAnt -D:project.config=release clean build >output-release-build.log *wait* *wait* *wait* and ta da, you will have a bin directory with all the release dlls. FluentNHibernate This was pretty simple. there’s instructions here :- http://wiki.fluentnhibernate.org/Getting_started#Installation basically, with git, create a directory, and you issue the command git clone git://github.com/jagregory/fluent-nhibernate.git and wait, and soon enough you have the source. Now, from the bin directory that NHibernate spit out, take everything and dump it into the subdirectory “fluent-nhibernate\tools\NHibernate” Now, to build, you can use rake….which a ruby build system, however you can also just open the solution and build.   Which is what I did.  I had a few problems with the references which I simply re-added using the new ones.  Once built, I just took all the NHibnerate dlls, and the fluent ones and replaced my existing NHibernate / Fluent and killed off the old linq project. All I had to change is the places that used  .Linq<T>  and replace them with .Query<T>  (which was easy as I had wrapped it already to isolate my code from such changes) and hey presto, everything worked.  Even the VB.NET linq calls. I need to do some more testing as I’ve only done basic smoke tests, but its all looking pretty good, so for now, I will stick to NHibernate!

  Read the article

• Strange Happenings

  - by MOSSLover

  There are weeks we go about our life thinking nothing is going to change nothing will happen.  Then there are other weeks a billion things happen at once.  Friday started off very weird for me.  I flew into Atlanta and I met some cool people for another SharePoint event.  I had some good conversations.  Saturday then hit me and my virtual machine bombed in my presentation after the auto updater ran.  I was writing code on the board and describing everything in notepad.  I would say as presentations go it was the best and the worst presentation all wrapped into one.  The next day I was in Baltimore and I hung out with my aunt which was relatively uneventful and great.  Then Monday hit and half my presentations failed or succeeded and my screen freezes so I start describing the code.  I was on top of my game until Monday night.  On top of the world.  I'm exhausted I get into Raleigh and one of the craziest stories of my life happens.  So my boss has been renting cars through Priceline this week I got a different company than the other weeks. The company gives me a Ford Focus and I plug in the coordinates on my IPhone where I want go.  I head out and then I get to the destination hotel (or I thought I did). I go inside it's the wrong hotel the other one is a few miles away.  I walk outside hop into the car and it sounds like a gunshot.  Nothing is starting...Am I doing something wrong?  No I'm not the car is completely dead in the water.  I call the rental car facility and they tell me to call roadside they are closing for the night.  Roadside says they can't give me a new car but they can get me a jump then I have to take it up with the facility.  They send me a tow truck to give me a jump the guy can't jump the car.  He tells me this vehicle was towed about an hour ago.  He shows me a copy of a slip from when he towed it.  We also notice the rental car company left one of there price scanning guns in the vehicle.  I call up roadside and now they are interested in getting me a car because I need to be onsite tomorrow.  They get the manager of the facility on the phone he apologizes profusely and he says he'll be there in 10 minutes.  About 30 minutes pass and him plus another dude show up with a Ford Escape leather interior.  At this point I hand him the gun tell him someone left it in the vehicle and that I'm not so happy with them.  I ask them to comp my rental they can't due to Priceline, however if I call him again this week he can get me a voucher.  It's about 2 am and I'm ready to get to the hotel I don't make it in the next morning until 10 am.  I would say this was a crazy week all forms of technology are trying to tell me something.  What I have no idea, but we'll see the outcome soon.  I feel so weird tons of change is about to happen.  I don't know if it's good or bad.  I think this week is some form of omen.

  Read the article

• Review&ndash;Build Android and iOS apps in Visual Studio with Nomad

  - by Bill Osuch

  Nomad is a Visual Studio extension that allows you build apps for both Android and iOS platforms in Visual Studio using HTML5. There is no need to switch between .Net, Java and Objective-C to target different platforms - write your code once in HTML5 and build for all common mobile platforms and tablets. You have access to the native hardware functions (such as camera and GPS) through the PhoneGap library, UI libraries such as jQuery mobile allow you to create an impressive UI with minimal work. Nomad is still in an early access beta stage, so the documentation is a bit sparse. In fact, the only documentation is a simple series of steps on how to install the plug-in, set up a project, build and deploy it. You're going to want to be a least a little familiar with the PhoneGap library and jQuery mobile to really tap into the power of this. The sample project included with the download shows you just how simple it is to create projects in Visual Studio. The sample solution comes with an index.html file containing the HTML5 code, the Cordova (PhoneGap) library, jQuery libraries, and a JQuery style sheet: The html file is pretty straightforward. If you haven't experimented with JQuery mobile before, some of the attributes (such as data-role) might be new to you, but some quick Googling will fill in everything you need to know. The first part of the file builds a simple (but attractive) list with some links in it: The second part of the file is where things get interesting and it taps into the PhoneGap library. For instance, it gets the geolocation position by calling position.coords.latitude and position.coords.longitude: ...and then displays it in a simple span: Building is pretty simple, at least for Android (I'm not an iOS developer so I didn't look at that feature) - just configure the display name, version number, and package ID. There's no need to specify Android version; Nomad supports 2.2 and later. Enter these bits of information, click the new "Build for Android" button (not the regular Visual Studio Build link...) and you get a dialog box saying that your code is being built by their cloud build service (so no building while away from a WiFi signal apparently). After a couple minutes you wind up with a .apk file that can be copied over to your device. Applications built with Nomad for Android currently use a temporary certificate, so you can test the app on your devices but you cannot publish them in the Google Play Store (yet). And I love the "success" dialog box: Since Nomad is still in Beta, no pricing plans have been announced yet, so I'll be curious to see if this becomes a cost-effective solution to mobile app development. If it is, I may even be tempted to spring for the $99 iOS membership fee! In the meantime, I plan to work on porting some of my apps over to it and seeing how they work. My only quibble at this time is the lack of a centralized documentation location - I'd like to at least see which (if any) features of JQuery and PhoneGap are limited or not supported. Also, some notes on targeting different Android screen sizes would be nice, but it's relatively easy to find jQuery examples out on the InterWebs. Oh well, trial and error! You can download the Nomad extension for Visual Studio by going to their web site: www.vsnomad.com. Technorati Tags: Android, Nomad

  Read the article

• EPM 11.1.2.2 Architecture: Financial Performance Management Applications

  - by Marc Schumacher

   Financial Management can be accessed either by a browser based client or by SmartView. Starting from release 11.1.2.2, the Financial Management Windows client does not longer access the Financial Management Consolidation server. All tasks that require an on line connection (e.g. load and extract tasks) can only be done using the web interface. Any client connection initiated by a browser or SmartView is send to the Oracle HTTP server (OHS) first. Based on the path given (e.g. hfmadf, hfmofficeprovider) in the URL, OHS makes a decision to forward this request either to the new Financial Management web application based on the Oracle Application Development Framework (ADF) or to the .NET based application serving SmartView retrievals running on Internet Information Server (IIS). Any requests send to the ADF web interface that need to be processed by the Financial Management application server are send to the IIS using HTTP protocol and will be forwarded further using DCOM to the Financial Management application server. SmartView requests, which are processes by IIS in first row, are forwarded to the Financial Management application server using DCOM as well. The Financial Management Application Server uses OLE DB database connections via native database clients to talk to the Financial Management database schema. Communication between the Financial Management DME Listener, which handles requests from EPMA, and the Financial Management application server is based on DCOM.  Unlike most other components Essbase Analytics Link (EAL) does not have an end user interface. The only user interface is a plug-in for the Essbase Administration Services console, which is used for administration purposes only. End users interact with a Transparent or Replicated Partition that is created in Essbase and populated with data by EAL. The Analytics Link Server deployed on WebLogic communicates through HTTP protocol with the Analytics Link Financial Management Connector that is deployed in IIS on the Financial Management web server. Analytics Link Server interacts with the Data Synchronisation server using the EAL API. The Data Synchronization server acts as a target of a Transparent or Replicated Partition in Essbase and uses a native database client to connect to the Financial Management database. Analytics Link Server uses JDBC to connect to relational repository databases and Essbase JAPI to connect to Essbase.  As most Oracle EPM System products, browser based clients and SmartView can be used to access Planning. The Java based Planning web application is deployed on WebLogic, which is configured behind an Oracle HTTP Server (OHS). Communication between Planning and the Planning RMI Registry Service is done using Java Remote Message Invocation (RMI). Planning uses JDBC to access relational repository databases and talks to Essbase using the CAPI. Be aware of the fact that beside the Planning System database a dedicated database schema is needed for each application that is set up within Planning.  As Planning, Profitability and Cost Management (HPCM) has a pretty simple architecture. Beside the browser based clients and SmartView, a web service consumer can be used as a client too. All clients access the Java based web application deployed on WebLogic through Oracle HHTP Server (OHS). Communication between Profitability and Cost Management and EPMA Web Server is done using HTTP protocol. JDBC is used to access the relational repository databases as well as data sources. Essbase JAPI is utilized to talk to Essbase.  For Strategic Finance, two clients exist, SmartView and a Windows client. While SmartView communicates through the web layer to the Strategic Finance Server, Strategic Finance Windows client makes a direct connection to the Strategic Finance Server using RPC calls. Connections from Strategic Finance Web as well as from Strategic Finance Web Services to the Strategic Finance Server are made using RPC calls too. The Strategic Finance Server uses its own file based data store. JDBC is used to connect to the EPM System Registry from web and application layer.  Disclosure Management has three kinds of clients. While the browser based client and SmartView interact with the Disclosure Management web application directly through Oracle HTTP Server (OHS), Taxonomy Designer does not connect to the Disclosure Management server. Communication to relational repository databases is done via JDBC, to connect to Essbase the Essbase JAPI is utilized.

  Read the article

• Big Data – ClustrixDB – Extreme Scale SQL Database with Real-time Analytics, Releases Software Download – NewSQL

  - by Pinal Dave

  There are so many things to learn and there is so little time we all have. As we have little time we need to be selective to learn whatever we learn. I believe I know quite a lot of things in SQL but I still do not know what is around SQL. I have started to learn about NewSQL recently. If you wonder what is NewSQL I encourage all of you to read my blog post about NewSQL over here Big Data – Buzz Words: What is NewSQL – Day 10 of 21. NewSQL databases are quickly becoming popular – providing the scale of NoSQL with the SQL features and transactions. As a part of learning NewSQL database, I have recently started to learn about ClustrixDB. ClustrixDB has been the most mature NewSQL database used by some of the largest internet sites in the world for over 3 years, with extensive SQL support. In addition to scale, it provides fast real-time analytics by bringing massively parallel processing (MPP), available only in warehousing databases, to the transactional database. The reason I am more intrigued about learning ClustrixDB is their recent announcement on Oct 31. ClustrixDB was only available as an appliance, but now with their software release on Oct 31, everyone can use it. It is now available as forever free for up to 12 cores with community support, and there is a 45 day trial for unlimited cluster sizes. With the forever free world, I am indeed interested in ClustrixDB now. I know that few of the leading eCommerce sites in the world uses them for their transactional database. Here are few of the details I have quickly noted for ClustrixDB. ClustrixDB allows user to: Scale by simply adding nodes to the cluster with a single command Run billions of transactions a day Run fast real-time analytics Achieve high-availability with recovery from node failure Manages itself Easily migrate from MySQL as it is nearly plug-and-play compatible, use MySQL drivers, tools and replication. While I was going through the documentation I realized that ClustrixDB also has extensive support for SQL features including complex queries involving joins on a dozen or more tables, aggregates, sorts, sub-queries. It also supports stored procedures, triggers, foreign keys, partitioned and temporary tables, and fully online schema changes. It is indeed a very matured product and SQL solution. Indeed Clusterix sound very promising solution, I decided to dig a bit deeper to understand who are current customers of the Clustrix as they exist in the industry for quite a few years. Their client list is indeed very interesting and here is my quick research about them. Twoo.com – Europe’s largest social discovery (dating) site runs 4.4 Billion Transactions a day with table sizes over a Terabyte, on a 168 core cluster. EngageBDR – Top 3 in the online advertising category uses ClustrixDB to serve 6.9 billion ads a day through real-time bidding platform. Their reports went from 4 hours to 15 seconds. NoMoreRack – Top 2 fastest growing e-commerce company in US used ClustrixDB for high availability and fast growth through Amazon cloud. MakeMyTrip – India’s leading travel site runs on ClustrixDB with two clusters running as multi-master in Chennai and Bangalore. Many enterprises such as AOL, CSC, Rakuten, Symantec use ClustrixDB when their applications need scale. I must accept that I am impressed with the information I have learned so far and now is the time to do some hand’s on experience with their product. I want to learn this technology so in future when it is about NewSQL, I know what I am talking about. Read more why Clustrix explains why you ClustrixDB might be the right database for you. Download ClustrixDB with me today and install it on your machine so in future when we discuss the technical aspects of it, we all are on the same page. The software can be downloaded here. Reference : Pinal Dave (http://blog.SQLAuthority.com)Filed under: Big Data, MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Clustrix

  Read the article

• How can I set my screen resolution to match my TV?

  - by Scott Severance

  I have a computer in my classroom that's connected to an LG smart TV (that's actually not so smart. I wouldn't recommend buying one.). For the touch interface, the TV wants a resolution of 1920x1080 at 60Hz. However, I can't seem to set the computer to that resolution. The display settings only offer 1024x768 and 640x480. The computer dual boots with Windows XP, where widescreen options are available in approximately the required size, but the exact resolution -- or even aspect ratio-- isn't available in XP either. I tried the following command: xrandr -s 1920x1080 -r 60 The response was: Size 1920x1080 not found in available modes Back in the old days, the solution would be to edit xorg.conf. However, since that file no longer exists, and I haven't found up-to-date info, I don't know what else to do. If it helps, this machine will never be connected to a different display, so resolution flexibility isn't important. Here's the output of lshw: *-display:0 description: VGA compatible controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fe800000-febfffff memory:d0000000-dfffffff ioport:ecd8(size=8) *-display:1 UNCLAIMED description: Display controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 64 bits clock: 33MHz According to the system settings, my graphics driver is unknown and my "experience" is standard. This is 64-bit Ubuntu 12.04 (Precise) Note: There are a number of similar questions to this one, but they didn't include any answers that helped me. Update After posting this question, I noticed one in the sidebar that I hadn't found through search but which appeared to contain the answer. Based on that question, I created the /etc/X11/xorg.conf file below: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "LG" ModelName "Smart TV" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "DRI" # [<bool>] #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "FallbackDebug" # [<bool>] #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "Shadow" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvMC" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "HotPlug" # [<bool>] #Option "RelaxedFencing" # [<bool>] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 #SubSection "Display" # Viewport 0 0 # Depth 1 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 4 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 8 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 15 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 16 #EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "1920x1080" EndSubSection EndSection According to /var/log/Xorg.0.log, my settings aren't being applied. In fact, I wonder if the config file is even being read. [ 1209.083] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 1209.084] (==) intel(0): RGB weight 888 [ 1209.084] (==) intel(0): Default visual is TrueColor [ 1209.084] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41 [ 1209.084] (--) intel(0): Chipset: "G41" [ 1209.084] (**) intel(0): Relaxed fencing enabled [ 1209.084] (**) intel(0): Wait on SwapBuffers? enabled [ 1209.084] (**) intel(0): Triple buffering? enabled [ 1209.084] (**) intel(0): Framebuffer tiled [ 1209.084] (**) intel(0): Pixmaps tiled [ 1209.084] (**) intel(0): 3D buffers tiled [ 1209.084] (**) intel(0): SwapBuffers wait enabled [ 1209.084] (==) intel(0): video overlay key set to 0x101fe [ 1209.172] (II) intel(0): Output VGA1 using monitor section Monitor0 [ 1209.260] (II) intel(0): EDID for output VGA1 [ 1209.260] (II) intel(0): Printing probed modes for output VGA1 [ 1209.260] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 1209.260] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz) [ 1209.260] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz) [ 1209.260] (II) intel(0): Output VGA1 connected [ 1209.260] (II) intel(0): Using user preference for initial modes [ 1209.260] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 1209.260] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1209.260] (II) intel(0): Kernel page flipping support detected, enabling [ 1209.260] (==) intel(0): DPI set to (96, 96)

  Read the article

• Cookbook: SES and UCM setup

  - by George Maggessy

  The purpose of this post is to guide you setting up the integration between UCM and SES. On my next post I’ll show different approaches to integrate WebCenter Portal, UCM and SES based on some common scenarios. Let’s get started. WebCenter Content Configuration WebCenter Content has a component that adds functionality to the content server to allow it to be searched via the Oracle SES. To enable the component installation, go to Administration -&gt; Admin Server and select SESCrawlerExport. Click the update button and restart UCM_server1 managed server. Once the managed server is back, we’ll configure the component. In the menu, under Administration you should see SESCrawlerExport. Click on the link. You’ll see the window below. Click on Configure SESCrawlerExport. Configure the values below: Hostname: SES hostname. Feed Location: Directory where data feeds will be saved. Metadata List: List of metadata that will be searchable by SES. After updating the values click on the Update button. Come back to the SESCrawlerExport Administration UI and click on Take Snapshot button. It will create the data feeds in the specified Feed Location. To check if the correct configuration was done, please access the following URL http://&lt;ucm_server&gt;:&lt;port&gt;/cs/idcplg?IdcService=SES_CRAWLER_DOWLOAD_CONFIG&amp;source=default. It should download config file in the format below: &lt;?xml version="1.0" encoding="UTF-8"?&gt; &lt;rsscrawler xmlns="http://xmlns.oracle.com/search/rsscrawlerconfig"&gt; &lt;feedLocation&gt;&lt;![CDATA[http://adc6160699.us.oracle.com:16200/cs/idcplg?IdcService=SES_CRAWLER_DOWNLOAD_CONTROL&amp;source=default]]&gt;&lt;/feedLocation&gt; &lt;errorFileLocation&gt;&lt;![CDATA[http://adc6160699.us.oracle.com:16200/cs/idcplg?IdcService=SES_CRAWLER_STATUS&amp;IsJava=1&amp;source=default&amp;StatusFeed=]]&gt;&lt;/errorFileLocation&gt; &lt;feedType&gt;controlFeed&lt;/feedType&gt; &lt;sourceName&gt;default&lt;/sourceName&gt; &lt;securityType&gt;attributeBased&lt;/securityType&gt; &lt;securityAttribute name="Account" grant="true"/&gt; &lt;securityAttribute name="DocSecurityGroup" grant="true"/&gt; &lt;securityAttribute name="Collab" grant="true"/&gt; &lt;/rsscrawler&gt; Make sure Account and DocSecurityGroup values are true. SES Configuration Let’s start by configuring the Identity Plug-ins in SES. Go to Global Settings -&gt; System -&gt; Identity Management Setup. Select Oracle Content Server and click the Activate button. We’ll populate the following values: HTTP endpoint for authentication: URL to WebCenter Content. Notice that /cs/idcplg was added at the end of the URL. Admin User: UCM Admin user. This user must have access to all CPOE content. Password: Password to Admin user. Authentication Type: NATIVE. Go back to the Home tab and click on Sources on the top left. Select Oracle Content Server on the right and click the Create button. Configuration URL: URL that point to the configuration file. Example: http://&lt;ucm_hostname&gt;:&lt;port&gt;/cs/idcplg?IdcService=SES_CRAWLER_DOWNLOAD_CONFIG&amp;source=default. User ID: UCM Admin user. Password: Password to Admin user. Click on the Authorization tab and add the appropriate values to the fields below. Make sure you see the ACCOUNT and DOCSECURITYGROUP security attributes at the end of the page. HTTP endpoint for authorization: http://&lt;ucm_hostname&gt;:&lt;port&gt;/cs/idcplg. Display URL prefix: http://&lt;ucm_hostname&gt;:&lt;port&gt;/cs. Administrator user: UCM Admin user. Administrator password. On the Document Types tab, add the documents that should be indexed by SES. As our last step, we’ll configure the Federation Trusted Entities under Global Settings. Entity Name: The user must be present in both the identity management server configured for your WebCenter application and the identity management server configured for Oracle SES. For instance, I used weblogic in my sample. Password: Entity user password.\ Now you are ready to test the integration on the SES UI: http://&lt;ses hostname&gt;:&lt;port&gt;/search/query/.

  Read the article

• On Reflector Pricing

  - by Nick Harrison

  I have heard a lot of outrage over Red Gate's decision to charge for Reflector. In the interest of full disclosure, I am a fan of Red Gate. I have worked with them on several usability tests. They also sponsor Simple Talk where I publish articles. They are a good company. I am also a BIG fan of Reflector. I have used it since Lutz originally released it. I have written my own add-ins. I have written code to host reflector and use its object model in my own code. Reflector is a beautiful tool. The care that Lutz took to incorporate extensibility is amazing. I have never had difficulty convincing my fellow developers that it is a wonderful tool. Almost always, once anyone sees it in action, it becomes their favorite tool. This wide spread adoption and usability has made it an icon and pivotal pillar in the DotNet community. Even folks with the attitude that if it did not come out of Redmond then it must not be any good, still love it. It is ironic to hear everyone clamoring for it to be released as open source. Reflector was never open source, it was free, but you never were able to peruse the source code and contribute your own changes. You could not even use Reflector to view the source code. From the very beginning, it was never anyone's intention for just anyone to examine the source code and make their own contributions aside from the add-in model. Lutz chose to hand over the reins to Red Gate because he believed that they would be able to build on his original vision and keep the product viable and effective. He did not choose to make it open source, hoping that the community would be up to the challenge. The simplicity and elegance may well have been lost with the "design by committee" nature of open source. Despite being a wonderful and beloved tool, Reflector cannot be an easy tool to maintain. Maybe because it is so wonderful and beloved, it is even more difficult to maintain. At any rate, we have high expectations. Reflector must continue to be able to reasonably disassemble every language construct that the framework and core languages dream up. We want it to be fast, and we also want it to continue to be simple to use. No small order. Red Gate tried to keep the core product free. Sadly there was not enough interest in the Pro version to subsidize the rest of the expenses. $35 is a reasonable cost, more than reasonable. I have read the blog posts and forum posts complaining about the time associated with getting the expense approved. I have heard people complain about the cost being unreasonable if you are a developer from certain countries. Let's do the math. How much of a productivity boost is Reflector? How many hours do you think it saves you in a typical project? The next question is a little easier if you are a contractor or a consultant, but what is your hourly rate? If you are not a contractor, you can probably figure out an hourly rate. How long does it take to get a return on your investment? The value added proposition is not a difficult one to make. I have read people clamoring that Red Gate sucks and is evil. They complain about broken promises and conflicts of interest. Relax! Red Gate is not evil. The world is not coming to an end. The sun will come up tomorrow. I am sure that Red Gate will come up with options for volume licensing or site licensing for companies that want to get a licensed copy for their entire team. Don't panic, and I am sure that many great improvements are on the horizon. Switching the UI to WPF and including a tabbed interface opens up lots of possibilities.

  Read the article

• What Can We Learn About Software Security by Going to the Gym

  - by Nick Harrison

  There was a recent rash of car break-ins at the gym. Not an epidemic by any stretch, probably 4 or 5, but still... My gym used to allow you to hang your keys from a peg board at the front desk. This way you could come to the gym dressed to work out, lock your valuables in your car, and not have anything to worry about. Ignorance is bliss. The problem was that anyone who wanted to could go pick up your car keys, click the unlock button and find your car. Once there, they could rummage through your stuff and then walk back in and finish their workout as if nothing had happened. The people doing this were a little smatter then the average thief and would swipe some but not all of your cash leaving everything else in place. Most thieves would steal the whole car and be busted more quickly. The victims were unaware that anything had happened for several days. Fortunately, once the victims realized what had happened, the gym was still able to pull security tapes and find out who was misbehaving. All of the bad guys were busted, and everyone can now breathe a sigh of relieve. It is once again safe to go to the gym. Except there was still a fundamental problem. Putting your keys on a peg board by the front door is just asking for bad things to happen. One person got busted exploiting this security flaw. Others can still be exploiting it. In fact, others may well have been exploiting it and simply never got caught. How long would it take you to realize that $10 was missing from your wallet, if everything else was there? How would you even know when it went missing? Would you go to the front desk and even bother to ask them to review security tapes if you were only missing a small amount. Once highlighted, it is easy to see how commonly such vulnerability may have been exploited. So the gym did the very reasonable precaution of removing the peg board. To me the most shocking part of this story is the resulting uproar from gym members losing the convenient key peg. How dare they remove the trusted peg board? How can I work out now, I have to carry my keys from machine to machine? How can I enjoy my workout with this added inconvenience? This all happened a couple of weeks ago, and some people are still complaining. In light of the recent high profile hacking, there are a couple of parallels that can be drawn. Many web sites are riddled with vulnerabilities are crazy and easily exploitable as leaving your car keys by the front door while you work out. No one ever considered thanking the people who were swiping these keys for pointing out the vulnerability. Without a hesitation, they had their gym memberships revoked and are awaiting prosecution. The gym did recognize the vulnerability for what it is, and closed up that attack vector. What can we learn from this? Monitoring and logging will not prevent a crime but they will allow us to identify that a crime took place and may help track down who did it. Once we find a security weakness, we need to eliminate it. We may never identify and eliminate all security weaknesses, but we cannot allow well known vulnerabilities to persist in our system. In our case, we are not likely to meet resistance from end users. We are more likely to meet resistance from stake holders, product owners, keeper of schedules and budgets. We may meet resistance from integration partners, co workers, and third party vendors. Regardless of the source, we will see resistance, but the weakness needs to be dealt with. There is no need to glorify a cracker for bringing to light a security weakness. Regardless of their claimed motives, they are not heroes. There is also no point in wasting time defending weaknesses once they are identified. Deal with the weakness and move on. In may be embarrassing to find security weaknesses in our systems, but it is even more embarrassing to continue ignoring them. Even if it is unpopular, we need to seek out security weaknesses and eliminate them when we find them. http://www.sans.org has put together the Common Weakness Enumeration http://cwe.mitre.org/ which lists out common weaknesses. The site navigation takes a little getting used to, but there is a treasure trove here. Here is the detail page for SQL Injection. It clearly states how this can be exploited, in case anyone doubts that the weakness should be taken seriously, and more importantly how to mitigate the risk.

  Read the article

• How do I configure WakeOnUSB properly?

  - by wishi

  How do I configure Wake-On-USB properly on a 10.04 or 10.10 Ubuntu (2.6.36 and higher if needed)? (Wake-on-USB is when the computer is asleep and for example a USB Keyboard event wakes up the machine!) The notebook is an Acer Aspire Timeline X 1830T. I don't know in which way the Linux Kernel supports the controllers. There are different ways to approach this, for example /proc/acpi/wakeup... or UDEV... or something with HAL? /proc/acpi/wakeup shows every device in S4, but I need S3. Device S-state Status Sysfs node P0P2 S4 *disabled PEGP S4 *disabled P0P1 S0 *disabled pci:0000:00:1e.0 EHC1 S4 *disabled pci:0000:00:1d.0 USB1 S4 *enabled USB2 S4 *disabled USB3 S4 *disabled USB4 S4 *disabled EHC2 S4 *disabled pci:0000:00:1a.0 USB5 S4 *disabled USB6 S4 *disabled USB7 S4 *disabled HDEF S0 *disabled pci:0000:00:1b.0 RP01 S5 *disabled pci:0000:00:1c.0 PXSX S5 *disabled pci:0000:01:00.0 RP02 S0 *disabled pci:0000:00:1c.1 PXSX S5 *disabled pci:0000:02:00.0 RP03 S0 *disabled PXSX S5 *disabled RP04 S0 *disabled PXSX S5 *disabled RP05 S0 *disabled PXSX S5 *disabled RP07 S0 *disabled PXSX S5 *disabled RP08 S0 *disabled PXSX S5 *disabled GLAN S0 *disabled PEG3 S4 *disabled PEG5 S4 *disabled PEG6 S4 *disabled SLPB S3 *enabled S4, which is Suspend-To-Disk afaik... doesn't seem to work either if I echo USB1 into the wakeup table. It just sets an S4 flag. can I get the USB ports in S3? I want to make the machine wakeup from Suspend-To-Ram (S3, ACPI standard) in case a key on my external keyboard is pressed. It only wakes up if a key on the internal Laptop keyboard is pressed... from Suspend To Ram. It seems if I plug in a USB mouse, that the USB port isn't even powered. I have no BIOS option to change this. Further specific information regarding the device: usb-devices T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 13 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04d9 ProdID=1603 Rev=03.10 S: Manufacturer= S: Product=USB Keyboard C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid root@underwater-laptop:/# lsusb [...] Bus 001 Device 013: ID 04d9:1603 Holtek Semiconductor, Inc. Bus 001 Device 004: ID 0bda:0138 Realtek Semiconductor Corp. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [...] If this doesn't work I have to properly explain why :( - but I think it is very hard to research this kernel internal. Any hints for good information here? I hope it's possible... I'm just looking for any solution. edit: this, waking up on USB, works on Windows! Thanks a lot, Marius

  Read the article

• Soft lockup after upgrade - cannot install from live CD

  - by nbm

  I dual-boot MacIntel Core 2 duo. nVidia graphics. Ran upgrade from ubuntu 13.10 to 14.04 (64 bit). On restart ran into {numbers} Bug: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] Tried loading earlier kernel: same problem Tried re-installing ubuntu from a liveCD that has worked in the past: version 13.04. Same problem. Tried re-partitioning hard drive using Mac OS X disk utility and then installing ubuntu 14.04LTS from liveCD. Same problem. Not possible to verify liveCD disk (creates same "soft lockup" bug.) Tried installing from the liveCD with version 13.04 that I know works (that's how I got Ubuntu on this machine in the first place.) Same problem. I know this is not a hardware problem as OS X works just fine, I am using it right now on the same machine. I have been using various versions of Ubuntu for 2 years. Things I cannot do: Open a terminal Verify CD image Start ubuntu from CD (same soft lockup problem) This problem is similar to some other questions, none of which have been satisfactorily answered: Ubuntu 14.04 soft lockup on Vostro 3500 Cannot do fresh install of Ubuntu 13.04 while booting from DVD: "soft lockup" bug Live CD stalls when installing Ubuntu 13.10 UPDATE 6/11/14: Following some much-appreciated advice from bain (see below) I burned a 12.04LTS disk and started with kernel parameters: noapic, no1apic, acpi=off, nomodeset, elevator=deadline, and clocksource=jiffies. With all of these parameters I was able to load the 12.04LTS CD ("Try without installing"). It worked fine. However, as soon as I tried to install Ubuntu from the CD, my wired ethernet (eth0) connection would hang. There are already various askubuntu questions and bug reports about this problem, none of which had answers for me. (E.g., dhclient eth0 does nothing, none of the various reset commands does anything, manually setting IP &etc does nothing. I could reliably kill the ethernet connection by clicking "install ubuntu" every single time.) I could go ahead and install 12.04 without an internet connection, but the install would freeze after mostly completing (I tried several times.) There were some relevant error messages in the details of the install output script that, IIRC, had to do with searching for missing files and not being able to access eth0 (internet) to get them. To be honest I gave up at that point and I'm not sure I wrote those down. If I find some notes I will post them. At this point I no longer have Ubuntu on my system. I wiped the partitions and am using exclusively OS X. I am leaving this question in case it helps anyone else with similar problems. I love open source and I love Linux, and the next machine I get I will probably just build from Arch. At the moment I miss repositories and a lot of other things about Ubuntu, but the OS X terminal is 'nix, I can pretty much use all the open source apps I like, and while I am not a fan of the Apple software it gets the job done for me. Unlike Ubuntu, which can't even install. I realize this isn't necessarily a place for a soapbox speech, but when I first installed 12.04 several years ago there were already people in the community complaining that Canonical was going too "commercial". But I loved it. Several years later and all I've seen is Canonical adding more not-so-useful bells and whistles to Ubuntu while continually failing to fix basic problems on upgrades. With a dual-boot (and sometimes triple-boot) system it always took me some tweaking to get an upgrade to work, and to some extent that is okay. But at this point I feel like Canonical ought to just put a price tag on Ubuntu. All I see is more commercialism and advertising and product tie-ins, and ongoing problems do not get fixed. I am a big fan of open-source, not-for profit enterprise. I am also a big fan of for-profit enterprise, which certainly has its place and usefulness. I am not a fan of companies who pretend to be in favor of open source but really are just out to make a buck, and IMNSHO that is what Canonical has become. This is a great community and I wish you all the best, but my next install of Linux will not be Ubuntu.

  Read the article

• Using Definition of Done to Drive Agile Maturity

  - by Dylan Smith

  I’ve been an Agile Coach at a lot of different clients over the years, and I want to share an approach I use to help them adopt and mature over time. It’s important to realize that “Agile” is not a black/white yes/no thing. Teams can be varying degrees of agile. I think of this as their agile maturity level. When I coach teams I want them to start out being a little agile, and get more agile as they mature. The approach I teach them is to use the definition of done as a technique to continuously improve their agile maturity over time. We’re probably all familiar with the concept of “Done Done” that represents what *actually* being done a feature means. Not just when a developer says he’s done right after he writes that last line of code that makes the feature kind-of work. Done Done means the coding is done, it’s been tested, installers and deployment packages have been created, user manuals have been updated, architecture docs have been updated, etc. To enable teams to internalize the concept of “Done Done”, they usually get together and come up with their Definition of Done (DoD) that defines all the activities that need to be completed before a feature is considered Done Done. The Done Done technique typically is applied only to features (aka User Stories). What I do is extend this to apply to several concepts such as User Stories, Sprints, Releases (and sometimes Check-Ins). During project kick-off I’ll usually sit down with the team and go through an exercise of creating DoD’s for each of these concepts (Stories/Sprints/Releases). We’ll usually start by just brainstorming a bunch of activities that could end up in these various DoD’s. Here’s some examples: Code Reviews StyleCop FxCop User Manuals Updated Architecture Docs Updated Tested by QA Tested by UAT Installers Created Support Knowledge Base Updated Deployment Instructions (for Ops) written Automated Unit Tests Run Automated Integration Tests Run Then we start by arranging these activities into the place they occur today (e.g. Do you do UAT testing only once per release? every sprint? every feature?). If the team was previously Waterfall most of these activities probably end up in the Release DoD. An extremely mature agile team would probably have most of these activities in the DoD for the User Stories (because an extremely mature agile team will probably do continuous deployment and release every story). So what we need to do as a team, is work to move these activities from their current home (Release DoD) down into the Sprint DoD and eventually into the User Story DoD (and maybe into the lower-level Check-In DoD if we decide to use that). We don’t have to move them all down to User Story immediately, but as a team we figure out what we think we’re capable of moving down to the Sprint cycle, and Story cycle immediately, and that becomes our starting DoD’s. Over time the team makes an effort to continue moving activities down from Release->Sprint->Story as they become more agile and more mature. I try to encourage them to envision a world in which they deploy to production as each User Story is completed. They would need to be updating User Manuals, creating installers, doing UAT testing (typical Release cycle activities) on every single User Story. They may never actually reach that point, but they should envision that, and strive to keep driving the activities down closer to the User Story cycle s they mature. This is a great technique to give a team an easy-to-follow roadmap to mature their agile practices over time. Sure there’s other aspects to maturity outside of this, but it’s a great technique, that’s easy to visualize, to drive agility into the team. Just keep moving those activities (aka “gates”) down the board from Release->Sprint->Story. I’ll try to give an example of what a recent client of mine had for their DoD’s (this is from memory, so probably not 100% accurate): Release Create/Update deployment Instructions For Ops Instructional Videos Updated Run manual regression test suite UAT Testing In this case that meant deploying to an environment shared across the enterprise that mirrored production and asking other business groups to test their own apps to ensure we didn’t break anything outside our system Sprint Deploy to UAT Environment But not necessarily actually request UAT testing occur User Guides updated Sprint Features Video Created In this case we decided to create a video each sprint showing off the progress (video version of Sprint Demo) User Story Manual Test scripts developed and run Tested by BA Deployed in shared QA environment Using automated deployment process Peer Code Review Code Check-In Compiled (warning-free) Passes StyleCop Passes FxCop Create installer packages Run Automated Tests Run Automated Integration Tests PS – One of my clients had a great question when we went through this activity. They said that if a Sprint is by definition done when the end-date rolls around (time-boxed), isn’t a DoD on a sprint meaningless – it’s done on the end-date regardless of whether those other activities are complete or not? My answer is that while that statement is true – the sprint is done regardless when the end date rolls around – if the DoD activities haven’t been completed I would consider the Sprint a failure (similar to not completing what was committed/planned – failure may be too strong a word but you get the idea). In the Retrospective that will become an agenda item to discuss and understand why we weren’t able to complete the activities we agreed would need to be completed each Sprint.

  Read the article

• My collection of favourite TFS utilities

  - by Aaron Kowall

  So, you’re in charge of your company or team’s Team Foundation Server.  Wish it was easier to manage, administer, extend?  Well, here are a few utilities that I highly recommend looking at. I’ve recently had need to rebuild my laptop and upgrade my local TFS environment to TFS 2012 Update 1.  This gave me cause to enumerate some of the utilities I like to have on hand. One of the reasons I love to use TFS on projects is that it’s basically a complete ALM toolkit.  Everything from Task Management, Version Control, Build Management, Test Management, Metrics and Reporting are all there ‘in the box’.  However, no matter how complete a product set it, there are always ways to make it better.  Here are a list of utilities and libraries that are pretty generally useful.  this is not intended to be an exhaustive list of TFS extensions but rather a set that I recommend you look at.  There are many more out there that may be applicable in one scenario or another.  This set of tools should work with TFS 2012 or 2010 if you grab the right version. Most of these tools (and more) are available from the Visual Studio Gallery or CodePlex. General TFS Power Tools – This is ‘the’ collection of utilities and extensions delivered by the Product Group.  Highly recommended from here are the Best Practice Analyzer for ensuring your TFS implementation is healthy and the Team Foundation Server Backups to ensure your TFS databases are backed up correctly. TFS Administrators Toolkit – helps make updates to work item types and reports across many team projects.  Also provides visibility of disk usage by finding large files in version control or test attachments to assist in managing storage utilization. Version Control Git-TF - a set of cross-platform, command line tools that facilitate sharing of changes between TFS and Git. These tools allow a developer to use a local Git repository, and configure it to share changes with a TFS server.  Great for all Git lovers who must integrate into a TFS repository. Testing TFS 2012 Tester Power Tool – A utility for bulk copying test cases which assists in an approach for managing test cases across multiple releases.  A little plug that this utility was written and maintained by Anna Russo of Imaginet where I also work. Test Scribe - A documentation power tool designed to construct documents directly from the TFS for test plan and test run artifacts for the purpose of discussion, reporting etc. Reporting Community TFS Report Extensions - a single repository of SQL Server Reporting Services report for Team Foundation 2010 (and above).  Check out the Test Plan Status report by Imaginet’s Steve St. Jean.  Very valuable for your test managers. Builds TFS Build Manager – A great utility if you are build manager over a complex build environment with many TFS build definitions. Community TFS Build Extensions – contains many custom build activities.  Current release binaries are for TFS 2010 but many of the activities can be recompiled for use with TFS 2012. While compiling this list, I was surprised by the number of TFS utilities and extensions I no longer use/need in TFS 2012 because of the great work by the TFS team addressing many gaps since the 2010 release. Are there any utilities you depend on that I’ve missed?  I’d love to hear about them in the comments!

  Read the article

• Best approach to depth streaming via existing codec

  - by Kevin

  I'm working on a development system (and game) intended for games set mostly in static third-person views. We produce our scenery by CG and photographic techniques. Our background art is rendered off-line by a production-grade renderer. To allow the runtime imagery to properly interact with the background art, I wrote a program to convert from depth output by Mental Ray into a texture, and a pixel shader to draw a quad such that the Z data comes from the texture. This technique is working out very well, but now we've decided that some of the camera angle changes between scenes should be animated. The animation itself is straightforward to produce from our CG models. We intend to encode it to some HD video codec such as H.264. The problem is that in order to maintain our runtime imagery on the screen, the depth buffer will need to be loaded for each video frame. Due to the bandwidth, the video's depth data will need to be compressed efficiently. I've looked into methods for performing temporal compression of depth info and found an interesting research paper here: http://web4.cs.ucl.ac.uk/staff/j.kautz/publications/depth-streaming.pdf The method establishes a mapping between 16-bit depth values and YCbCr values. The mapping is tuned to the properties of existing video codecs in order to maximize precision of the decoded depths after the YCbCr has undergone video compression. It allows an existing, unmodified video codec to be used on the backend. I'm looking at how to pull this off with the least possible work. (This design change was unplanned.) Our game engine itself is native C++, presently for Win32 and DirectX, although we've worked hard to keep platform dependence segregated because we intend other ports. We don't have motion video facilities in the engine yet but will ultimately need that anyway for cinematics. I was planning on using some off-the-shelf motion video solution we can plug into our engine, and haven't chosen one yet. This new added requirement makes selecting one harder since, among other things, we'll now need to bypass colourspace conversion on one of the streams, and also will need to be playing two streams simultaneously in lockstep, on top of in some cases audio on one of them (for the cinematics). I'm also wondering if it's possible (or even useful) to do the conversion from YCbCr to depth in a pixel shader, or if it's better to just do it in CPU and separately load the resulting depth values into a locked tex. The conversion unfortunately does involve branching logic per-pixel. (There are more naive mappings that don't need branching, but they produce inferior results.) It could be reduced to a table lookup but the table would be 32MB. Programming is second-nature to me but I'm not that experienced with pix shaders and have zero knowledge of off-the-shelf video solutions. I'd therefore be interested in advice from others who may have dealt more with depth streaming, pixel shaders, and/or off-the-shelf codecs, regarding how feasible the proposed application is and what off-the-shelf video systems out there would best get along with this usage case.

  Read the article

• The five steps of business intelligence adoption: where are you?

  - by Red Gate Software BI Tools Team

  When I was in Orlando and New York last month, I spoke to a lot of business intelligence users. What they told me suggested a path of BI adoption. The user’s place on the path depends on the size and sophistication of their organisation. Step 1: A company with a database of customer transactions will often want to examine particular data, like revenue and unit sales over the last period for each product and territory. To do this, they probably use simple SQL queries or stored procedures to produce data on demand. Step 2: The results from step one are saved in an Excel document, so business users can analyse them with filters or pivot tables. Alternatively, SQL Server Reporting Services (SSRS) might be used to generate a report of the SQL query for display on an intranet page. Step 3: If these queries are run frequently, or business users want to explore data from multiple sources more freely, it may become necessary to create a new database structured for analysis rather than CRUD (create, retrieve, update, and delete). For example, data from more than one system — plus external information — may be incorporated into a data warehouse. This can become ‘one source of truth’ for the business’s operational activities. The warehouse will probably have a simple ‘star’ schema, with fact tables representing the measures to be analysed (e.g. unit sales, revenue) and dimension tables defining how this data is aggregated (e.g. by time, region or product). Reports can be generated from the warehouse with Excel, SSRS or other tools. Step 4: Not too long ago, Microsoft introduced an Excel plug-in, PowerPivot, which allows users to bring larger volumes of data into Excel documents and create links between multiple tables.  These BISM Tabular documents can be created by the database owners or other expert Excel users and viewed by anyone with Excel PowerPivot. Sometimes, business users may use PowerPivot to create reports directly from the primary database, bypassing the need for a data warehouse. This can introduce problems when there are misunderstandings of the database structure or no single ‘source of truth’ for key data. Step 5: Steps three or four are often enough to satisfy business intelligence needs, especially if users are sophisticated enough to work with the warehouse in Excel or SSRS. However, sometimes the relationships between data are too complex or the queries which aggregate across periods, regions etc are too slow. In these cases, it can be necessary to formalise how the data is analysed and pre-build some of the aggregations. To do this, a business intelligence professional will typically use SQL Server Analysis Services (SSAS) to create a multidimensional model — or “cube” — that more simply represents key measures and aggregates them across specified dimensions. Step five is where our tool, SSAS Compare, becomes useful, as it helps review and deploy changes from development to production. For us at Red Gate, the primary value of SSAS Compare is to establish a dialog with BI users, so we can develop a portfolio of products that support creation and deployment across a range of report and model types. For example, PowerPivot and the new BISM Tabular model create a potential customer base for tools that extend beyond BI professionals. We’re interested in learning where people are in this story, so we’ve created a six-question survey to find out. Whether you’re at step one or step five, we’d love to know how you use BI so we can decide how to build tools that solve your problems. So if you have a sixty seconds to spare, tell us on the survey!

  Read the article

• Make the Time

  - by WonderOfItAll

  Took the little one to the pool tonight for swim lessons. Okay, Okay. They're not really lessons so much as they are "Hey, here's a few bucks, let me rent out a small section of your pool to swim around with my little one" Saw a dad at the pool. Bluetooth on, iPad in hand, and two year old somewhere around there. Saw a mom at the pool. Arguing with her five year old to NOT take a shower after swimming. Bluetooth on, iPad in hand, work laptop open on stadium seats. Her reasoning for not wanting the child to shower "Look, I have to get this stuff to the office by 6:30, we don't have time for you to shower. Let's go" Wait, isn't the whole point of this little experience called Mommy and Me (or, as in my case, Daddy and Me). Wherein Mommy/Daddy is supposed to spend time with little one. Not with the Bluetooth. Not with the work laptop. Dad (yeah, the same dad from earlier), in the pool. Bluetooth off (it's not waterproof or I'm sure he would've had it on), two year old in hand and iPad somewhere put away. Getting frustrated with kid because he won't 'perform' on command. Here's a little exchange Kid: "I don't wanna get in the water" Dad: "Well, we're here for 30 minutes, get in the water" Kid: "No, don't wanna" Dad: "Fine, I'm getting in" and, true to his word, in he goes, off to swim. Kid: Crying Dad: "Well, c'mon" Kid: Walking to stands Dad: Ignoring kid Kid: At stands Dad: Out of pool, drying off. Frustrated. Grabs bag, grabs kid, leaves How sad. It really seems like I am living in a generation of parents who view their children as one big scheduled distraction to another. It's almost like the dad was saying "Look, little 2 year old boy, I have a busy scheduled. Right now my Outlook Calendar tells me that I have 30 mins to spend with you, so, let's go kid: PERFORM because I have the time" Really? Can someone please tell me when the hell this happened? When did spending time with your kid, spending time with your family, spending time with your spouse, etc... become a distraction? I've seen people at work all day Tweeting throughout the day, checked in with Four Square, IM up and running constantly so they can 'stay in touch' only to see these same folks come home and be irritated because their kids or their spouse wants to connect with the. I've seen these very same people leave the house, go to the corner bar/store/you-name-the-place to be 'alone' only to find them there, plugged in, tweeting away, etc, etc, etc I LOVE technology. I love working with technology. But I also know that I am a human being. A person who, by very definition, is a social being. I needed social interactions and contact--and, no, I'm not talking about the Social Graph kind of connections, I'm talking about those interactions which, *GASP* involve eye to eye contact and human contact. A recent study found that the number one complaint of kids is that they feel they have to compete with technology for their parents time and attention. The number one wish from high school kids? That there parents would turn off the computer/tv/cell phone at dinner. This, coming from high school kids. Shouldn't that tell you a whole helluva lot? So, do yourself a favor tomorrow. Plug into technology all day. Throw yourself into it. Be passionate about what you do. When you walk through the door to your family, turn it all off for 30 mins and be there with your loved ones. If you can manage to play Angry Birds, I'm sure you can handle being disconnected for 30 minutes. Make the time

  Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >