Search Results

Search found 5521 results on 221 pages for 'replacement parts'.

Page 119/221 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

  • Ubuntu stops using Nvidia driver after kernel upgrade

    - by Daniel
    Just updated and restarted, Ubuntu's doesn't display correctly. After restart, the desktop now looks like this. I've temporarily switched to the Nouveau driver. The update history reveals the kernel was updated, amongst many things; and the following were installed: linux-image-3.5.0-19-generic (3.5.0-19.30) linux-image-extra-3.5.0-19-generic (3.5.0-19.30) I've encountered this type of problem quite recently, so I decided to reapply the same steps, to solve the problem, as follows: sudo apt-get install linux-headers-3.5.0-19 sudo apt-get install linux-headers-3.5.0-19-generic sudo depmod -a sudo modprobe nvidia sudo /etc/init.d/*dm restart When installing linux-headers-3.5.0-19-generic, I get an error, message from terminal as follows: Setting up linux-headers-3.5.0-19-generic (3.5.0-19.30) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.5.0-19-generic /boot/vmlinuz-3.5.0-19-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. However, I ignored the above error and continued the steps with sudo depmod -a, installed nvidia-current, then did sudo modprobe nvidia, which yielded the following error: FATAL: Error inserting nvidia_current (/lib/modules/3.5.0-19-generic/updates/dkms/nvidia_current.ko): No such device Upon restart, the Nvidia driver now works! BTW, do those error messages imply I broke something? Just curious, cause I don't want to get happy I've fixed it, then it stops working later on. The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen.

    Read the article

  • Working with fubar/refuctored code

    - by Keyo
    I'm working with some code which was written by a contractor who left a year ago leaving a number of projects with buggy, disgustingly bad code. This is what I call cowboy PHP, say no more. Ideally I'd like to leave the project as is and never touch it again. Things break, requirements change and it needs to be maintained. Part A needs to be changed. There is a bug I cannot reproduce. Part A is connect to parts B D and E. This kind of work gives me a headache and makes me die a little inside. It kills my motivation and productivity. To be honest I'd say it's affecting my mental health. Perhaps being at the start of my career I'm being naive to think production code should be reasonably clean. I would like to hear from anyone else who has been in this situation before. What did you do to get out of it? I'm thinking long term I might have to find another job. Edit I've moved on from this company now, to a place where idiots are not employed. The code isn't perfect but it's at least manageable and peer reviewed. There are a lot of people in the comments below telling me that software is messy like this. Sure I don't agree with the way some programmers do things but this code was seriously mangled. The guy who wrote it tried to reinvent every wheel he could, and badly. He stopped getting work from us because of his bad code that nobody on the team could stand. If it were easy to refactor I would have. Eventually after many 'just do this small 10minute change' situations had ballooned into hours of lost time (regardless of who on the team was doing the work) my boss finally caved in it was rewritten.

    Read the article

  • Recording slow web stream

    - by Budric
    I'm trying to record an mpeg2 video stream from a website that doesn't have the greatest bandwidth. The video often buffers. I want to download the stream and watch it offline. The extract stream format received is: Stream #0.0[0x44]: Audio: mp2, 48000 Hz, stereo, s16, 192 kb/s Stream #0.1[0x45]: Video: mpeg2video (Main), yuv420p, 704x576 [PAR 16:11 DAR 16:9], 15000 kb/s, 27.19 fps, 25 tbr, 90k tbn, 50 tbc I use the following tool to transocde the stream: ffmpeg -i "http://url" -y -vcodec libx264 -b 3000k -acodec copy /tmp/stream.mp4 Unfortunately after a few seconds ffmpeg stops recording with an error [mpegts @ 0x1f0b9c0] PES packet size mismatch [mp2 @ 0x1f14640] incomplete frame Error while decoding stream #0.0 [mpeg2video @ 0x1f16860] ac-tex damaged at 0 26 [mpeg2video @ 0x1f16860] Warning MVs not available I've tried encoding with vlc as well with similar issues. Although vlc doesn't stop encoding, the output video has regions where it hangs. vlc -I dummy "http://url" --network-caching="1000" --sout="#transcode{vcodec=h264,vb=3000,acodec=mp3,ab=192}:std{access=file,mux=mp4,dst=/tmp/stream.mp4}" [mpeg2video @ 0x7f2d4c001e20] ac-tex damaged at 9 33 [mpeg2video @ 0x7f2d4c001e20] Warning MVs not available [mpeg2video @ 0x7f2d4c001e20] concealing 132 DC, 132 AC, 132 MV errors [mpeg2video @ 0x7f2d4c001e20] ac-tex damaged at 16 17 [mpeg2video @ 0x7f2d4c001e20] Warning MVs not available [mpeg2video @ 0x7f2d4c001e20] concealing 836 DC, 836 AC, 836 MV errors libdvbpsi error (PSI decoder): TS discontinuity (received 4, expected 3) for PID 0 I also tried flv transcoding and it shows up with its own set of issues, like output flv file hangs in certain parts. Anyone know what's wrong or how to fix this?

    Read the article

  • Connecting to wireless networks from command line

    - by Balaji
    I need to write a shell script which connects to one of the two available wi-fi connections. One is a un secure connection and the other is secure connection. My question has 2 parts- 1.How to connect to the un-secure (un-encrypted and no password required) connection from command line (or by executing a shell script) when I'm connected to the secure connection? I followed the steps in http://www.ubuntugeek.com/how-to-troubleshoot-wireless-network-connection-in-ubuntu.html for in-secure connection. I put all the commands in a script and executed it (I made sure that interface name and essid are correct) - sudo dhclient -r wlan0 - sudo ifconfig wlan0 up - sudo iwconfig wlan0 essid "UAPublic" - sudo iwconfig wlan0 mode Managed - sudo dhclient wlan0 But nothing happens - I'm not disconnected from the current network and connected to the new one 2.When I want to connect to the secure wi-fi network, I understand from http://askubuntu.com/a/138476/70665 that I need to use wpa_supplicant. But I enter a lot of details in the interface when I connect via UI security : wpa and wpa2 enterprise Authentication : PEAP CA certificate : Equifax... PEAP version : automatic inner authentication : MSCHAPv2 username : password : How to use wpa_supplicant to mention all these details in the command line? The conf file network={ ssid="ssid_name" psk="password" } doesn't work for me.

    Read the article

  • Google suddenly only indexes https and not http

    - by spender
    So all of a sudden, searches for our site "radiotuna" give out the result as an HTTPS link. https://www.google.com/?q=radiotuna#hl=en&safe=off&output=search&sclient=psy-ab&q=radiotuna&oq=radiotuna&gs_l=hp.12...0.0.0.3499.0.0.0.0.0.0.0.0..0.0.les%3B..0.0...1c.LnOvBvgDOBk&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=177c7ff705652ec3&biw=1366&bih=602 We only use https for the download of two specific files (these urls are resources used for autoupdate functionality of an app we distribute). All other parts of the site should be served over http. We wouldn't like to see any other traffic over https, nor any of our site links to appear in search engines as https. I'd like to address this issue. It seems that the following solutions are available: hand out an https specific robots.txt as such: User-agent: * Disallow: / and/or at app-level, 301 permanent redirect all requests (except the two above) to HTTP if they come in as HTTPS. My concern with the robots method is that, say (for some reason) google decided not to index http pages, disallowing https pages might mean that google has nothing left to index with disastrous consequences for our ranking. This means I'm inclined to go with a 301 redirect. Any thoughts?

    Read the article

  • Social Retailing

    - by David Dorf
    For retailers the move to mobile has been obvious.  More and more consumers are interacting with retailers, both online and in the store, using their mobile devices.  Retailers are quick to invest in both consumer facing mobile apps as well as ones to equip employees.  But when I talk to retailers about social, the value isn't as clear-cut.  Intuitively, retailers know that better relationships with customers will result in higher sales, but the trip to get there has many paths. The interesting thing about social media is that it has the potential to permeate all parts of the business.  Obviously it works well for marketing, but it also has a place with recruiting, knowledge management, trend analysis, and employee collaboration.  Information gathered from social media can enhance existing processes like assortment planning, product development, space planning, promotion planning, and replenishment.  Letting the customer influence each of these areas helps align the experience. One of the things holding retailers back is the lack of consistent and integrated tools to manage social media and make sense of the huge amounts of data.  To that end Oracle has been aggressively acquiring in the space, as depicted in the infographic below.  Soon, social will get the same level of investment as mobile. The Social CRM Arms Race: A Timeline - An infographic by the team at Pardot Marketing Automation

    Read the article

  • Trouble with SAT style vector projection in C#/XNA

    - by ssb
    Simply put I'm having a hard time working out how to work with XNA's Vector2 types while maintaining spatial considerations. I'm working with separating axis theorem and trying to project vectors onto an arbitrary axis to check if those projections overlap, but the severe lack of XNA-specific help online combined with pseudo code everywhere that omits key parts of the algorithm, googling has left me little help. I'm aware of HOW to project a vector, but the way that I know of doing it involves the two vectors starting from the same point. Particularly here: http://www.metanetsoftware.com/technique/tutorialA.html So let's say I have a simple rectangle, and I store each of its corners in a list of Vector2s. How would I go about projecting that onto an arbitrary axis? The crux of my problem is that taking the dot product of say, a vector2 of (1, 0) and a vector2 of (50, 50) won't get me the dot product I'm looking for.. or will it? Because that (50, 50) won't be the vector of the polygon's vertex but from whatever XNA calculates. It's getting the calculation from the right starting point that's throwing me off. I'm sorry if this is unclear, but my brain is fried from trying to think about this. I need a better understanding of how XNA calculates Vector2s as actual vectors and not just as random points.

    Read the article

  • Methodologies for Managing Users and Access?

    - by MadBurn
    This is something I'm having a hard time getting my head around. I think I might be making it more complicated than it is. What I'm trying to do is develop a method to store users in a database with varying levels of access, throughout different applications. I know this has been done before, but I don't know where to find how they did it. Here is an example of what I need to accomplish: UserA - Access to App1, App3, App4 & can add new users to App3, but not 4 or 1. UserB - Access to App2 only with ReadOnly access. UserC - Access to App1 & App4 and is able to access Admin settings of both apps. In the past I've just used user groups. However, I'm reaching a phase where I need a bit more control over each individual user's access to certain parts of the different applications. I wish this were as cut and dry as being able to give a user a role and let each role inherit from the last. Now, this is what I need to accomplish. But, I don't know any methods of doing this. I could easily just design something that works, but I know this has been done and I know this has been studied and I know this problem has been solved by much better minds than my own. This is for a web application and using sql server 2008. I don't need to store passwords (LDAP) and the information I need to store is actually very limited. Basically just username and access.

    Read the article

  • PeopleSoft 8.52 iPad Certification

    - by Dave Bain
    One of the real gems in the PeopleTools 8.52 release is the certification of PeopleSoft applications running in the Safari Browser on an iPad.  It is nice that PeopleSoft is not constrained by technology like Adobe Flex/Flash, so announcements like this "Adobe drops plans for mobile Flash support" do not limit our mobile solution to custom mobile development. There are parts of PeopleSoft applications that operate better on iPads than others.  One of the best is Workcenters.  Workcenters were new to PeopleTools 8.51 and we are starting to see more and more adoption of them.  Workcenters are roll based landing pages that eliminate difficult navigation by providing access to most links, pages, and reports a user in a role needs.  One of the nicest I’ve seen is the Supply Manager Workspace.  Here are some links to screenshots of what a WorkCenter looks like on an iPad: Here's the standard PeopleSoft Login Page The Supply Manager Workspace looks great full screen on an iPad iPad has a great user interface to zoom, here's a screenshot of an upclose view of an analytic. Touch one of the analytics and it drills into the details. Go ahead and give it a try.  WorkCenters and Dashboards are starting to show up across applications.  For a quick one to try, navigate to the PeopleTools->Integration Broker->Integration Network WorkCenter.  It’s new in PeopleTools 8.52.

    Read the article

  • Ubuntu Lenove OCZ Agility3 - No Grub after install

    - by Michael
    I've tried a dualboot (Win7 + Ubuntu) installation it on a Lenovo E330 with Agility3 240 Gigs... Conclusions: Ubuntu:: Ubuntu 12.04 x86_64 ( 21.06.2012 ) is not able to install grub in a bootable way. Grub will be installed and does update-grub during Installation, recognizes also the Win OS. But after a restart it boots directly to Windows.This is directly connected to the OCZ Agility3. On a good old fashion harddisk (those with the moving parts) Ubuntu is capable to install grub with no problem in a bootable manner. PinguyOS:: PinguyOS 12.04 LTS x86_64 (which is a Ubuntu based distro) is able to handle the Grub installation on OCZ Agility3. However they both use Grub 1.99... What i did:: Installed Windows. Installed Ubuntu. Installed PinguyOS. Grub Updates:: Grub updates are only through Pinguy OS possible, this means you have to edit the Ubuntu Grub entries manually after Kernelupdates on Ubuntu, in the PiguyOS sytem.. What i've already tried: Firmwareupgrade OCZ (livestick, successfull) Install Ubuntu Grub to sda Install Ubuntu Grub to sdc (Ubuntu Partion) Install Ubuntu Grub to /boot update-grub manually after install restore grub any ideas appreciated..

    Read the article

  • Proper updating of GeoClipMaps

    - by thr
    I have been working on an implementation of gpu-based geo clip maps, but there is a section of the GPU Gems 2 article that i just can't seem to understand, specifically this paragraph and more precisely the bolded part: The choice of grid size n = 2k-1 has the further advantage that the finer level is never exactly centered with respect to its parent next-coarser level. In other words, it is always offset by 1 grid unit either left or right, as well as either top or bottom (see Figure 2-4), depending on the position of the viewpoint. In fact, it is necessary to allow a finer level to shift while its next-coarser level stays fixed, and therefore the finer level must sometimes be off-center with respect to the next-coarser level. An alternative choice of grid size, such as n = 2k-3, would provide the possibility for exact centering Let's take an example image from the article: My "understanding" of the way the clip maps were update was that you floor the position of the viewpoint to an int, and such get the center vertex point if this is not the same as the previous center point, you update the entire map. Now, this obviously is not the case - but what I am failing to understand is this: If you look at the image above, if the viewpoint was to move one unit to the right, then the inner ring (the one just around the view point + white center square) would end up getting a 1 unit space on both the left and right side of itself. But there is nothing in the paper that deals with this, what i mean is that it would end up looking like this (excuse my crummy cut-and-paste editing of the above image): This is obviously not a valid state of the. So, would the solution be that a clip ring (layer) can only move in increments of the ring/layer it's contained within? Wouldn't this end up being very restrictive? I feel like I am missing some crucial understanding of parts of the algorithm, but I have been over both this paper and the original paper from 2004 and I just can't see what I am not getting.

    Read the article

  • Smooth waypoint traversing

    - by TheBroodian
    There are a dozen ways I could word this question, but to keep my thoughts in line, I'm phrasing it in line with my problem at hand. So I'm creating a floating platform that I would like to be able to simply travel from one designated point to another, and then return back to the first, and just pass between the two in a straight line. However, just to make it a little more interesting, I want to add a few rules to the platform. I'm coding it to travel multiples of whole tile values of world data. So if the platform is not stationary, then it will travel at least one whole tile width or tile height. Within one tile length, I would like it to accelerate from a stop to a given max speed. Upon reaching one tile length's distance, I would like it to slow to a stop at given tile coordinate and then repeat the process in reverse. The first two parts aren't too difficult, essentially I'm having trouble with the third part. I would like the platform to stop exactly at a tile coordinate, but being as I'm working with acceleration, it would seem easy to simply begin applying acceleration in the opposite direction to a value storing the platform's current speed once it reaches one tile's length of distance (assuming that the tile is traveling more than one tile-length, but to keep things simple, let's just assume it is)- but then the question is what would the correct value be for acceleration to increment from to produce this effect? How would I find that value?

    Read the article

  • Thinking skills to be a good programmer

    - by Paul
    I have been programming for last 15 years with non-CS degree. Main reason I got into programming was that I liked to learn new things and apply them to my work. And I was able to find and fix programming errors and their causes faster than others. But I never find myself a a guru or an expert, maybe due to my non-CS major. And when I saw great programmers, I observed they are very good, much better than me of course, at solving problems. One skill I found good in my mid-career is thinking of requirements and tasks in a reverse order and in abstract. In that way, I can see what is really required for me to do without detail and can quickly find parts of solution that already exist. So I wonder if there are other thinking skills to be a good programmer. I've followed Q&As below and actually read some of books recommended there. But I couldn't really pickup good methods directly applicable for my programming work. What non-programming books should a programmer read to help develop programming/thinking skills? Skills and habits to develop to be good at programming (I'm a newbie)

    Read the article

  • Country specific content vs global content

    - by Ando
    I have a global product presentation website myproduct.com For certain countries I also own the country domain: myproduct.co.uk, myproduct.com.au, myproduct.es, myproduct.de, etc. The presentation website is translated in multiple languages and I set up redirects: myproduct.es will redirect to myproduct.com/es/, myproduct.de will redirect to myproduct.com/de/, etc. . The content so far is the same, just translated in different languages. The advantages are that it's easy to keep the content aligned - everything is managed from one centralized dashboard (I'm using Wordpress with qtranslate). Now I'm running into trouble as for different countries I want localized content - for UK I want to run different promotions and use a different reseller than for .com.au so I would like that users coming from myproduct.co.uk see something different than those coming from myproduct.com.au (and not be redirected to myproduct.com as they are right now). How can I achieve this? I could duplicate the whole main website and modify only certain parts but then I would have a lot of duplicate content (e.g. info about how the product works) and I would have pages that are likely to change (FAQ page) that I would have to keep updated over all websites. I can duplicate only partially the main website: on the localized website I would have only the pages that are different and then all other links would point to the .com site. This would solve the duplication problem but would cause confusion for the user as you would navigate from .co.uk to .com without noticing and then wonder how to get back. Other, better option?

    Read the article

  • Any advantage to the script version of Google Adwords' conversion tracking code?

    - by ripper234
    Google Adword has an HTML snippet to track conversions: <script type="text/javascript"> /* <![CDATA[ */ var google_conversion_id = 12345; var google_conversion_language = "en"; var google_conversion_format = "3"; var google_conversion_color = "ffffff"; var google_conversion_label = "someopaqueid"; var google_conversion_value = 0; /* ]]> */ </script> <script type="text/javascript" src="http://www.googleadservices.com/pagead/conversion.js"> </script> <noscript> <div style="display:inline;"> <img height="1" width="1" style="border-style:none;" alt="" src="http://www.googleadservices.com/pagead/conversion/12345/?label=opaque&amp;guid=ON&amp;script=0"/> </div> </noscript> It is composed of two parts: For clients supporting javascript, an inline script that sets variables, plus loading a reporting script. For other clients, an image tag. As far as I can see, the image tag has some advantages: It works on all browsers. It is asynchronous. It's shorter to have only this version, compared to both this and the js version. Any reason not to drop the <noscript> tag and just use the image conversion snippet directly?

    Read the article

  • How can rotating release managers improve a project's velocity and stability?

    - by Yannis Rizos
    The Wikipedia article on Parrot VM includes this unreferenced claim: Core committers take turns producing releases in a revolving schedule, where no single committer is responsible for multiple releases in a row. This practice has improved the project's velocity and stability. Parrot's Release Manager role documentation doesn't offer any further insight into the process, and I couldn't find any reference for the claim. My first thoughts were that rotating release managers seems like a good idea, sharing the responsibility between as many people as possible, and having a certain degree of polyphony in releases. Is it, though? Rotating release managers has been proposed for Launchpad, and there were some interesting counterarguments: Release management is something that requires a good understanding of all parts of the code and the authority to make calls under pressure if issues come up during the release itself The less change we can have to the release process the better from an operational perspective Don't really want an engineer to have to learn all this stuff on the job as well as have other things to take care of (regular development responsibilities) Any change of timezones of the releases would need to be approved with the SAs and: I think this would be a great idea (mainly because of my lust for power), but I also think that there should be some way making sure that a release manager doesn't get overwhelmed if something disastrous happens during release week, maybe by have a deputy release manager at the same time (maybe just falling back to Francis or Kiko would be sufficient). The practice doesn't appear to be very common, and the counterarguments seem reasonalbe and convincing. I'm quite confused on how it would improve a project's velocity and stability, is there something I'm missing, or is this just a bad edit on the Wikipedia article? Worth noting that the top voted answer in the related "Is rotating the lead developer a good or bad idea?" question boldly notes: Don't rotate.

    Read the article

  • How to prevent duplicate data access methods that retrieve similar data?

    - by Ronald Wildenberg
    In almost every project I work on with a team, the same problem seems to creep in. Someone writes UI code that needs data and writes a data access method: AssetDto GetAssetById(int assetId) A week later someone else is working on another part of the application and also needs an AssetDto but now including 'approvers' and writes the following: AssetDto GetAssetWithApproversById(int assetId) A month later someone needs an asset but now including the 'questions' (or the 'owners' or the 'running requests', etc): AssetDto GetAssetWithQuestionsById(int assetId) AssetDto GetAssetWithOwnersById(int assetId) AssetDto GetAssetWithRunningRequestsById(int assetId) And it gets even worse when methods like GetAssetWithOwnerAndQuestionsById start to appear. You see the pattern that emerges: an object is attached to a large object graph and you need different parts of this graph in different locations. Of course, I'd like to prevent having a large number of methods that do almost the same. Is it simply a matter of team discipline or is there some pattern I can use to prevent this? In some cases it might make sense to have separate methods, i.e. getting an asset with running requests may be expensive so I do not want to include these all the time. How to handle such cases?

    Read the article

  • Does anybody know of any resources to achieve this particular "2.5D" isometric engine effect?

    - by Craig Whitley
    I understand this is a little vague, but I was hoping somebody might be able to describe a high-level workflow or link to a resource to be able to achieve a specific isometric "2.5D" tile engine effect. I fell in love with http://www.youtube.com/watch?v=-Q6ISVaM5Ww this engine. Especially with the lighting and the shaders! He has a brief description of how he achieved what he did, but I could really use a brief flow of where you would start, what you would read up on and learn and the logical order to implement these things. A few specific questions: 1) Is there a heightmap on the ground texture that lets the light reflect brighter on certain parts of it? 2) "..using a special material which calculates the world-space normal vectors of every pixel.." - is this some "magic" special material he has created himself, or can you hazard a guess at what he means? 3) with relation to the above quote - what does he mean by 'world-space normal vectors of every pixel'? 4) I'm guessing I'm being a little bit optimistic when I ask if there's any 'all-in-one' tutorial out there? :)

    Read the article

  • Handling Types for Real and Complex Matrices in a BLAS Wrapper

    - by mga
    I come from a C background and I'm now learning OOP with C++. As an exercise (so please don't just say "this already exists"), I want to implement a wrapper for BLAS that will let the user write matrix algebra in an intuitive way (e.g. similar to MATLAB) e.g.: A = B*C*D.Inverse() + E.Transpose(); My problem is how to go about dealing with real (R) and complex (C) matrices, because of C++'s "curse" of letting you do the same thing in N different ways. I do have a clear idea of what it should look like to the user: s/he should be able to define the two separately, but operations would return a type depending on the types of the operands (R*R = R, C*C = C, R*C = C*R = C). Additionally R can be cast into C and vice versa (just by setting the imaginary parts to 0). I have considered the following options: As a real number is a special case of a complex number, inherit CMatrix from RMatrix. I quickly dismissed this as the two would have to return different types for the same getter function. Inherit RMatrix and CMatrix from Matrix. However, I can't really think of any common code that would go into Matrix (because of the different return types). Templates. Declare Matrix<T> and declare the getter function as T Get(int i, int j), and operator functions as Matrix *(Matrix RHS). Then specialize Matrix<double> and Matrix<complex>, and overload the functions. Then I couldn't really see what I would gain with templates, so why not just define RMatrix and CMatrix separately from each other, and then overload functions as necessary? Although this last option makes sense to me, there's an annoying voice inside my head saying this is not elegant, because the two are clearly related. Perhaps I'm missing an appropriate design pattern? So I guess what I'm looking for is either absolution for doing this, or advice on how to do better.

    Read the article

  • Weekend Project: Build a Fireball Launcher

    - by Jason Fitzpatrick
    What’s more fun than playing with fire? Shooting it from your hands. Put on your robe and wizard hat, make a stop at the hardware store, and spend the weekend trying to convince your friends you’ve acquired supernatural powers. Over at MAKE Magazine, Joel Johnson explains the impetus for his project: A stalwart of close-quarter magicians for years, the electronic flash gun is a simple device: a battery-powered, hand-held ignitor that uses a “glo-plug” to light a bit of flash paper and cotton, shooting a fireball a few feet into the air. You can buy one from most magic shops for around $50, but if you build one on your own, you’ll not only save a few bucks, you’ll also learn how easy it is to add fire effects to almost any electronics project. (And what gadget couldn’t stand a little more spurting flame?) The parts list is minimal but the end effect is pretty fantastic. Hit up the link below for the full build guide, plenty of warnings, and a weekend project that’s sure to impress. How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2

    Read the article

  • First Installation

    - by Dj Zia
    I had windows xp on my desktop originally. Yesterday we were able to replace this with Ubuntu 12.04 from a thumb drive. The live CD did not work. I am more familiar with the system they introduced me to in School recently. Linux pretty much has similarity all around so I am finding the differences not as much of an issue. So, there were a few issues with the installation and getting Grub to start working. There is the low graphics issue which brings us to the command line basics. I am a little familiar with linux so it isn't too intimidating; I am really good with step by step instructions in simple order. My question is Ubuntu installed with out any basic driver's or generic header's. It also is not connecting my computer to the internet. My system is older not new. For the time it had above average parts. How do I solve the problem of Getting the header's, making sure the right configurations are set, and where do I get the driver's for my white box desktop to run Ubuntu properly? Thank you

    Read the article

  • How to efficiently protect part of an application with a license

    - by Patrick
    I am working on an application that has many functional parts. When a customer buys the application, he buys the standard functionality, but he can also buy some additional elements of the application for an additional price. All of the elements are part of the same application executable. A license key is used to indicate which of the elements should be accessible in the application. Some of the elements can be easily disabled if the user didn't pay for it. These are typically the modules that you can access via the application's menu. However, some elements give more problems: What if a part of the data model is related to an optional part? Do I build up these data structures in my application so the rest of my application can just assume they're always there? Or do I don't build them, and add checks in the rest of may application? What if some optional part is still useful to perform some internal tasks, but I don't want to expose it to the user externally? What if the marketing responsible wants to make a standard part now an optional part? In all of my application I assume that that part is present, but if it becomes optional, I should add checks on it everywhere in the application. I have some ideas on how to solve some of the problems (e.g. interfaces with dual implementations: one working implementation, and one that is activated if the optional part is not activated). Do you know of any patterns that can be used to solve this kind of problem? Or do you have any suggestions on how to handle this licensing problem? Thanks.

    Read the article

  • HTC Android device mounted as USB drive is read-only unless I'm root

    - by Ian Dickinson
    When I connect my HTC Incredible S to my Ubuntu 10.10 system as a USB drive, the device seems to mount OK, but is read-only unless I access it as root. For example, if I run nautilus, I can't drag and drop files to the SD-card in the phone, but if I run sudo nautilus I can. I have USB debug support set on the phone (Applications > Development > USB debugging) and I have added a rule for the device in /etc/udev/rules.d/51-android.rules on my Ubuntu system. Any suggestions as to how I can mount the drive so that I can copy content to the SD card without needing to sudo? Update Following advice from waltinator, I added the following line to my /etc/fstab: UUID=3537-3834 /media/usb1 vfat rw,user,noexec,nodev,nosuid,noauto However, the Android device is still being auto-mounted on /media/usb1 with uid and gid root. Update 2 syslog output: Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdd1 /media/usb1 Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: run-parts /etc/usbmount/mount.d

    Read the article

  • Data Management Business Continuity Planning

    Business Continuity Governance In order to ensure data continuity for an organization, they need to ensure they know how to handle a data or network emergency because all systems have the potential to fail. Data Continuity Checklist: Disaster Recovery Plan/Policy Backups Redundancy Trained Staff Business Continuity Policies In order to protect data in case of any emergency a company needs to put in place a Disaster recovery plan and policies that can be executed by IT staff to ensure the continuity of the existing data and/or limit the amount of data that is not contiguous.  A disaster recovery plan is a comprehensive statement of consistent actions to be taken before, during and after a disaster, according to Geoffrey H. Wold. He also states that the primary objective of disaster recovery planning is to protect the organization in the event that all or parts of its operations and/or computer services are rendered unusable. Furthermore, companies can mandate through policies that IT must maintain redundant hardware in case of any hardware failures and redundant network connectivity incase the primary internet service provider goes down.  Additionally, they can require that all staff be trained in regards to the Disaster recovery policy to ensure that all parties evolved are knowledgeable to execute the recovery plan. Business Continuity Procedures Business continuity procedure vary from organization to origination, however there are standard procedures that most originations should follow. Standard Business Continuity Procedures Backup and Test Backups to ensure that they work Hire knowledgeable and trainable staff  Offer training on new and existing systems Regularly monitor, test, maintain, and upgrade existing system hardware and applications Maintain redundancy regarding all data, and critical business functionality

    Read the article

  • license and copyright assignment

    - by corintiumrope
    I'm currently working on a wordpress plugin. My client gives me a specs doc (a powerpoint presentation, if you can call that a specs doc), and I code the requested functionality. Every time I send him code every file containing code starts with these lines: Author: My Name Copyright: The_client's_company.com License: MIT Expat (http://en.wikipedia.org/wiki/Expat_License) My intention being giving my client complete right to relicense and distribute the code under any other license (as the TOS of the freelancing website requires, plus I know he intends to sell it under a proprietary license), but at the same time giving myself the right to expand and redistribute the plugin under MIT license if I wish to (not that I do). The reason is I am paid only 10USD/hour (this is my first gig) so I want to at least keep the right to reuse parts of the code in other projects or expand it if I want to start a similar project myself when I finish the contract (unlikely, but who knows...) or show it to potential employees. The contract we agreed upon doesn't include any licensing specifications but I've informed him on the emails we've interchanged that although all my work is licensed by default as MIT I'm giving my clients the copyright of the code I produce so they can relicense it at will before distribution. Is this the correct way of achieving that?

    Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >