Search Results

Search found 4620 results on 185 pages for 'serial over lan'.

Page 119/185 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

• Wireless adapter won't enable

  - by user52141

  I bought a d-link dwa-125, plugged it in and windows recognized it right away and said everything was good to go. But there were no connection options. When I open up the network control panel and have it show me the adapters... the wireless adapter is greyed out and says it is disabled. So I tell it to enable. It says is it enabling, then says it is enabled... but the adapter stayed greyed out saying disabled. I am running 7 x64. I have reinstalled drivers, connected it via lan and had it update drivers.. same problem. It works just fine on any other computer in the house, just not this one.

  Read the article

• What protocols will/are ISPs use for IPv6 deployment?

  - by rbeede

  Currently ISPs deal out addresses via DHCP for IPv4 dynamic (single) addresses. What protocol will/are ISPs going to use for IPv6 when they can hand a customer an entire /64 (or /48 if they are nice) block? DHCPv6, RA? For ISPs that support true end-to-end IPv6 will they provide gateway devices (similar to cable modem or true DSL bridges for example) that receive border information for that specific customer? I'm just trying to get an idea of how your common residential service customer will have to configure things in an IPv6 Internet (whenever that comes). Will it be something customers are expected to statically configure on their home wireless router? Today with IPv4 I do it like this: Modem (bridge) passes public IPv4 obtained via DHCPv4 from ISP to second device (wireless router). It in turn has its own DHCPv4 service it provides on the internal lan.

  Read the article

• When connected to VPN through Windows 7 running under OS X via VMWare Fusion, does traffic from the OS X side go through the VPN?

  - by user1202747

  I only have a rudimentary knowledge of VPNs. My understanding is that, in most network configurations, when a client is connected remotely to a VPN server, all network traffic passes through the VPN server before going to the client, and all data coming from the client passes through the VPN server before going out over the wider Internet. I run Windows 7 using VMWare Fusion under OS X Lion. If I access a web page in Safari, say, on the OS X side of things, does that traffic pass through the VPN server? Or does it bypass it because the two OS's are regarded as separate network devices by my LAN? I would appreciate any insight anyone can provide. Thanks.

  Read the article

• Removing integrated video card drivers broke other hardware?

  - by jsnlxndrlv

  I just purchased and installed an XFX ATI Radeon HD 4650 video card. The installation instructions said to remove the old video card drivers before installing the new driver. I did both things, but now every time I start my computer, the Found New Hardware wizard pops up for the following three devices: PCI Device SM Bus Controller Other PCI Bridge Device Furthermore, my LAN port no longer functions. The cable's connected, and the light on the port comes on, but the computer can't find any servers when I attempt to connect with it. The modem and router are working, and obviously I'm able to use the other computer here to post this. What do I do to fix this?

  Read the article

• Redirecting HTTP traffic from a local server on the web

  - by MrJackV

  Here is the situation: I have a webserver (let's call it C1) that is running an apache/php server and it is port forwarded so that I can access it anywhere. However there is another computer within the webserver LAN that has a apache server too (let's call it C2). I cannot change the port forwarding nor I can change the apache server (a.k.a. install custom modules). My question is: is there a way to access C2 within a directory of C1? (e.g. going to www.website.org/random_dir will allow me to browse the root of C2 apache server.) I am trying to change as little as possible of the config/other (e.g. activating modules etc.) Is there a possible solution? Thanks in advance.

  Read the article

• Home router for higher network loads

  - by Zizzencs

  I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

  Read the article

• Cannot access internal website after being connected to other network

  - by Dandroid

  I have a client who claim they cannot access their internal website when they have e.g. been out traveling. They have to reset their browser settings every time to be able to get access again. As they live on another continent and timezone it's hard for me to run live tests with them to see what changes in their browser settings. My first guess would be it's some sort of Proxy related issue, but I want to know if there could be other reasons for this? It's not the LAN itself, that we are sure of. It's browser specific only. Edit It's worth mentioning that it only happens when they turn off/restart their computers.

  Read the article

• Configure clients to navigate through specific wan. Pfsense

  - by leandronn

  I have a machine with a pfsense running. It is configured with three ethernet cards. LAN 192.168.2.1/21 WAN1 200.41.X.2/24 WAN2 200.41.X.3/24 ISP Gateway 200.41.X.1 This is a connection with 5 different IP addresses. WAN1 and WAN2 are directly connected to my ISP router. I need a way to configure some clients navigating through WAN1 and some through WAN2. I am new to pfsense so, please, if you can send me some examples to do this. I can add two squids if it is necessary. Thanks a lot.

  Read the article

• ldap samba user access issue

  - by ancillary

  I have a samba share that is on the LAN. It is auth'd via ldap. Users access file system via ad windows shares. There are shortcuts in directories that point to dir's on samba. Typically a user will click the shortcut to the smb dir, and will be met with a permission denied error. Upon closing explorer and reopening, it will work. DNS is handled by the domain controller, and that is the only server any of the machines use for DNS. Nothing in eventvwr. Only see successful auth entries in samba log. Any ideas?

  Read the article

• How to detect an iPhone connecting a network?

  - by JayCrossler

  I've noticed through watching Wireshark that when an iPhone connects to a wifi network, it sends out a few IGMP/MDNS packets to 224.0.0.251 (LAN broadcast, I think). Is there any easy way to watch for these packets and then either run a script or send an event? Or, is the best way to just run a packet sniffer? Any simple ones that can send events or execute curl commands when a filter is triggered? When I run nc -u -l 5353 I get: My-Name-iPhonelocal??? x???)?? ??cc^C Can I do something like: nc -u -l 5353 | grep iPhonelocal | execute command...

  Read the article

• Free firewall for Windows Server 2003

  - by n00b_Admin

  We have a Windows Server 2003 R2 Machine here at work that I need to ensure is accessible only from specific set of IP Addresses. The Server is on a LAN and I am aware that one of the possible solutions maybe limit access to the Server's VLAN. However that is not feasible at the moment. I've been searching for a firewall that could do this, Windows' Firewall is pretty limited and I don't see an option in it to limit incoming data based on Source IP addresses. Most free firewalls like Comodo and ZoneAlarm don't work on Windows Server. Any ideas on how to accomplish this would be of great help. Thanks in advance.

  Read the article

• How to effectively secure a dedicated server for intranet use?

  - by Mark

  I need to secure a dedicated server for intranet use, the server is managed so will have software based security, but what other security should be considered for enterprise level security? The intranet is a host for an ECM (Alfresco) managing and storing sensitive documents. As the information is sensitive we are trying to make it as secure as reasonably possible (requirement in UK law). We plan to encrypt the data on the database. It will be connected to via SSL encryption. Should we consider Hardware firewall, Private lan between the application server and database server?

  Read the article

• PC reboots instead of shutting down, no software problem. What could be the cause?

  - by DaVinci

  Hi, first of all: I'm not sure if superuser is the right site for my question and google didn't help. I have a pc here that prefers rebooting to shuting down. Everytime I try to shut the pc down it reboots, however it is possible to turn the pc off by pressing the power button. The problem is not windows-specific, the Ubuntu LiveCD does exactly the same that's why I said that it is no software problem. I checked wake on LAN, it is disabled and I also resetted the BIOS settings to factory default. That might not mean that it can't be a BIOS problem but I don't know what else to try here. I did not check any hardware yet but nothing exploded so far. I don't know what could have caused this behaviour as it is not my PC. The Mainboard is a ASUS P5Q-E P45.

  Read the article

• Can Remote Desktop connect only 2 monitors when the client has 3 or 4 monitors connected?

  - by user12931

  I have three monitors (all 1920x1200) connected to my desktop and I would like to RDP into another computer (running Windows Server 2003) and use only two of my three monitors. The main monitor is used for notification from the LAN like email, build status, etc. I've tried modifying the .rdp file to have a higher resolution (i.e. 3840x1200 ) which sort of works but the bits per pixel goes down to 8 and you have to manually resize the window which means that you need to change it to around 3840x1150. If I supply /span to the commandline it gives me a bit more than 3840 spanned across the three monitors (is there perhaps a limitation of say 4096 for the maximum resolution?). WORKAROUND: Connect twice to the same computer. Here's an interesting post from Microsoft: http://blogs.msdn.com/b/rds/archive/2009/08/21/remote-desktop-connection-7-for-windows-7-windows-xp-windows-vista.aspx

  Read the article

• What is the proper way to set up the Apache document root in terms of privileges?

  - by racl101

  I have just installed Ubuntu 9.10 server edition on my machine and I wish to run my own personal local server with other users in the same LAN. First, I was wondering what folder directory structure is best for the web root? Should I just use: /var/www/ and start throwing web documents there or should I create a folder elsewhere (maybe the home directory)? Second, in the /var/www/ directory only the root user can create documents in there, however, I wish to have other users be able to create files in the document root and upload them via FTP. Should I change the permissions or the www/ folder? Or again, should I create the document root elsewhere with different permissions? What is the safest way of doing this?

  Read the article

• Determining where a file is being cached

  - by RoadieRich

  I've got a debian webserver running apache, from which I regularly download an executable using IE 8 on an XP virtual machine (over LAN). However, I realised that somewhere along the line that I've been repeatedly running the same version (and wondering why my changes weren't being displayed). A Ctrl+F5 in IE will let me download the new version (although the page is always updated with a simple F5). This makes me suspect that the caching is happening in windows/IE, but I'm not certain. Wherever it's happening, is there an easy way to prevent it at the server? Eventually, we're hoping to offer the software to the entire company, and we'd like to avoid having to tell everyone to do a Ctrl+F5 every time there's an updated version.

  Read the article

• Folder sync application which can sync over Internet (the other machine specified by an IP)?

  - by Adal

  I need to sync some folders between two Win 7 machines. While they are connected to the same LAN, they can't see each-other over Windows Networking since sharing is disabled on both of them (security reasons). Do you know any sync app which can work over IP? The folder I need to sync has 500,000 files in it (80 GB in total), so the sync app should be pretty efficient. At the moment I copy the files from one machine to the other over FTP, but it takes forever, since a separate connection is opened for each file. Or maybe you know some app which can efficiently transfer a large number of files between two machines on the Internet?

  Read the article

• Two NICs, one server.

  - by kobrien

  I have two NICs on a fresh install of Ubuntu 10.04 LTS. Both are config'd be dhcp. Both cards are on the same lan with same gateway. everything about the cards is the same except the IPs they get, which is what I want. What I'm trying to achieve is having both NICs operational at the same time. Currently when the server boots, it activates both NICs, but the server can't resolve any domains. If I ifdown one of them and bring it back up, the server is able to resolve domains, but the NIC I bring up won't respond to any traffic. Any ideas?

  Read the article

• Where does traffic shaping typically take place?

  - by eekmeter

  As part of upgrading our network infrastructure we are looking to traffic shape our bandwidth since we only have about 3Mb down / 1 Mb up. We're looking to prioritize it so that web browsing gets priority and in the future some VOIP might be added in as well. Internal LAN traffic doesn't need to be controlled just our outbound connection. I've been looking at Cisco hardware and it seems that several of their products do shaping at the core switch, firewall, and router level. I'm wondering where does shaping normally take place? Is it normally done at the router, core switch, or firewall?

  Read the article

• Run 2008 R2 Service under 2000 Domain Account

  - by NoDisassemble

  I'm trying to get a service to run under a domain account. When I try to add the account, I get the error The account name is invalid or does not exist, or the password is invalid for the account name specified I know the account exists and the password is correct. I am also having trouble adding it manually to the "Log on as a service" setting, I get the error An extended error has occured. Failed to save Local Policy Database After a day of research I'm starting to suspect it has to do with it being a 2008 R2 server trying to use a 2000 domain account. I've tried to change the LAN Manager authentication level and the Minimum session security looks okay per my Google digging. I'm not sure what else I can do?

  Read the article

• Move email off Small Business Server to Google Apps, retain other SBS functions?

  - by Paul S.

  Recently, an in-house Microsoft Small Business Server 2011 was installed where I work. Unfortunately, our buildings have a bad electrical power supply and we suffer frequent outages. We have a large percentage of staff working off-site. Now when the power goes off here, everyone everywhere loses email functionality. I have been assigned to research the possibility of routing our email to Google Apps while maintaining LAN functions on the SBS. I haven't worked with Microsoft products for several years now, so do not know how SBS is structured. Can anyone here tell me if this is possible, or point me to good resources that explain our options?

  Read the article

• Make a server ( other than the router ) to be the default gateway for a subnet

  - by powerguy123

  I am trying to make a server ( lets call it server_A) which is different from the router to be the gateway for a subnet. Why do I want this ? I want to host a loadbalancer on server_A using LVS-NAT, and I dont want to implement a V-Lan or IP-IP tunneling. I have modified the routing tables of the remaining servers on the subnet to use server_A as the gateway. I have set server_A to not send ICMP reroute packets. But most traffic from servers in that subnet to outside clients are still being sent through the original gateway, bypassing server_A. Is there any other configuration I need to set in order to achieve my goal ?

  Read the article

• How many xml http requests is too much for a pc to handle?

  - by Uri

  I'm running mediawiki on an apache on a regular pc running vista (don't know the specific specs, but I'm guessing at least duo core 2 2 giga hertz processor, broadband connection (500 kb/s at least, probably 1 mega). I want to use the MediaWiki api to send a lot of requests to this server. Most of the time the requests will be sent through LAN (but sometimes through the internet). I'm talking thousands of requests every few seconds at worst case. (A lot of these requests may repeat themselves, I guess some sort of cache would help) Will the server handle this, or do I need a stronger/dedicated computer? (I'm not looking for specific yes/no, but just want to get an idea as to what configuration of computer will support how many request per second) Thanks

  Read the article

• Networking issues with WNR3500L

  - by ageis23

  When I try connecting to my wireless network it attempts to connect then gives up. There's something strange going on with the mac's. The eternet switch and all the vlan interfaces have a mac 00:FF:FF:FF:FF:FF. config 'switch' 'eth0' option 'vlan0' '2 3 4 8*' option 'vlan1' '0 8' option 'vlan2' '1 8' config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'type' 'bridge' option 'ifname' 'eth0.1' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ipaddr' '192.168.2.1' option 'ip6addr' '' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' option 'ipaddr' '192.168.1.8' option 'ip6addr' '' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '192.168.1.253' config 'interface' 'dmz' option 'ifname' 'eth0.2' option 'proto' 'static' option 'ipaddr' '192.168.0.1' option 'netmask' '255.255.255.0' Any help on this will be greatly appreciated! When I try setting the mac using macaddr it does nothing. It works perfectly fine when I turn the authentication off.

  Read the article

• Show internal website through iframe

  - by tommasop

  Hi guys, I have a public website with an iframe pointing to a private website (only visible inside my company's lan). I'd like that the iframed pages could also be visible from the outside. Is it possible to achieve? My public server is a Windows Server 2003 with IIS 6 and the server can browse easily to the private server webpage. My private server is an Ubuntu 8.04 machine. I tried with an IIS virtual directory redirection but it's not working.

  Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >