Search Results

Search found 8228 results on 330 pages for 'card reader'.

Page 120/330 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

  • Why cant I get 3 monitors working with my ati 5770

    - by G-Dogg
    I have an ati 5770, card with vga, dvi and hdmi output. I can only get 2 out of the 3 monitors working at once, however i can change the configuation so that all monitors can be selected, but only 2 will work at once.. 2 of my monitors have dvi inputs and one has vga. in my catyalist control center it shows all 3 monitors are there but either 2 can be selected at a time, and so the same with my windows 7. I have and adapter which i use on the 3rd monitor, hdmi-dvi adaptor and it works. also when i boot up my pc i get 2 monitors booting up and when windows starts the 3rd monitor boots but the 1st one closes. I looked at my package box and it actualy does specify ati eyefinity technology is available with this card. why wont it work???

    Read the article

  • Using multiple wifi connections simultaneously on Windows

    - by Salman A
    My office PC has a one wireless network card and there are three available wifi connections: primary, backup and backup of a backup (grin). Is it possible for me to use all three simultaneously. If this results in an increase in bandwidth that's well and good, but primary reason is every now and then one of the network fails and i have to switch back and forth between the available networks by disconnecting, viewing available networks and connecting to next one hoping its running. Do i need more than one network card or a software e.g. a proxy.

    Read the article

  • Using multiple wifi connections simultaneously on Windows

    - by Salman A
    My office PC has a one wireless network card and there are three available wifi connections: primary, backup and backup of a backup (grin). Is it possible for me to use all three simultaneously. If this results in an increase in bandwidth that's well and good, but primary reason is every now and then one of the network fails and i have to switch back and forth between the available networks by disconnecting, viewing available networks and connecting to next one hoping its running. Do i need more than one network card or a software e.g. a proxy.

    Read the article

  • Laptop recommendation for home user

    - by Mehper C. Palavuzlar
    I'm going to buy a new laptop soon and I need Super Users' recommendations. The following criteria are crucial for me: Intel i series processor Min. 4 GB RAM Min. 500 GB HDD HDMI port Min. 3 USB ports Not a monster, but a good graphics card Multimedia card reader DVD-RW Double Layer No heating problems! What do you recommend me? I'm considering buying a Vaio but I'm not sure. TIA.

    Read the article

  • How to reset video/display drivers in Vista without restarting OS?

    - by jdk
    Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

    Read the article

  • How to reset video/display drivers in Vista without restarting OS?

    - by jdk
    Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

    Read the article

  • How to stream video content in asp.net?

    - by Kon
    Hi, I have the following code which downloads video content: WebRequest wreq = (HttpWebRequest)WebRequest.Create(url); using (HttpWebResponse wresp = (HttpWebResponse)wreq.GetResponse()) using (Stream mystream = wresp.GetResponseStream()) { using (BinaryReader reader = new BinaryReader(mystream)) { int length = Convert.ToInt32(wresp.ContentLength); byte[] buffer = new byte[length]; buffer = reader.ReadBytes(length); Response.Clear(); Response.Buffer = false; Response.ContentType = "video/mp4"; //Response.BinaryWrite(buffer); Response.OutputStream.Write(buffer, 0, buffer.Length); Response.End(); } } But the problem is that the whole file downloads before being played. How can I make it stream and play as it's still downloading? Or is this up to the client/receiver application to manage?

    Read the article

  • POST with HTTPBuilder -> NullPointerException?

    - by Stefan Kendall
    I'm trying to make a simple HTTP POST request, and I have no idea why the following is failing. I tried following the examples here, and I don't see where I'm going wrong. Exception java.lang.NullPointerException at groovyx.net.http.HTTPBuilder$RequestConfigDelegate.setBody(HTTPBuilder.java:1131) ... Code def List<String> search(String query, int maxResults) { def http = new HTTPBuilder("mywebsite") http.request(POST) { uri.path = '/search/' body = [string1: "", query: "test"] requestContentType = URLENC headers.'User-Agent' = 'Mozilla/5.0 Ubuntu/8.10 Firefox/3.0.4' response.success = { resp, InputStreamReader reader -> assert resp.statusLine.statusCode == 200 String data = reader.readLines().join() println data } } [] }

    Read the article

  • Java: Print and access List <String[]>

    - by battousai622
    Im reading in a file and storing it in t1. How do i access the elements in t1? When i try to print it i get addresses instead of values. Also whats the dif between string and string[]? CSVReader reader = new CSVReader(new FileReader("src/new_acquisitions.csv")); List <String[]> t1 = reader.readAll(); int i = 0 while(i < t1.size()) { System.out.println(t1.get(i)); i++; } output: [Ljava.lang.String;@9304b1 [Ljava.lang.String;@190d11 [Ljava.lang.String;@a90653 [Ljava.lang.String;@de6ced

    Read the article

  • XMLHttpRequest fails in observer method

    - by Michael
    I'm developing a Firefox extension and this code belongs to javascript module. var ajax = Cc["@mozilla.org/xmlextras/xmlhttprequest;1"].createInstance(); ajax.open('GET', "http://www.google.com", true); ajax.onload = function () { Reader.log("Got News"); }; ajax.onerror = function () { Reader.log("Got Error"); }; ajax.send(null); This small code always fails (onerror) if calling from observe method invoked by preference "@mozilla.org/preferences-service;1" Anyone knows how to make this work in observe method?

    Read the article

  • Stream Music To Ventrilo From ESXi VM

    - by omghai2u
    I would like to stream music to my Ventrilo server from a Windows XP virtual machine running on an ESXi host. I have followed the instructions outlined here to stream music from something like VLC to the Ventrilo server on another machine and it works fine. I have also added the lines: sound.present = "TRUE" sound.virtualDev = "es1371" sound.fileName = "-1" sound.autodetect = "TRUE" to my .vmx file, as suggested here (http://communities.vmware.com/thread/191878), to get a sound card in my VM. The problem I am having is that it seems that my VM is not outputting any sound, so there's nothing to stream through Ventrilo. The Device Manager on the VM shows that this new sound card has drivers and doesn't appear to have any concerns with it. Can someone point me in the right direction to get my desired outcome? Thanks! PS. sorry for the long 2nd link, apparently I can only post 1 hyperlink with this low reputation.

    Read the article

  • PC monitors shut off and system hangs while playing 3D games, but sound continues - Diagnosis?

    - by Jon Schneider
    Two days ago, I started running into a problem with my Windows PC: The PC's two connected monitors simultaneously lose signal and go black (as though the PC had been powered off). The keyboard's Numlock, Capslock, and Scroll Lights will become "stuck" in their current positions, as though the PC is hung. (For example, the Numlock light on the keyboard remains lit regardless of me pressing the Numlock key repeatedly.) No keyboard input does anything. (Ctrl+Alt+Del, Ctrl+Shift+Esc, Ctrl+C, etc.) However -- Whatever sound/music the PC was playing continues to play, and the PC's fans continue running, so the PC hasn't powered itself off or rebooted itself. Opening up the case, the graphics card is pretty hot to the touch. I had this happen 3 times in one evening. In all cases, I was playing a game with 3D graphics when the problem occurred (Torchlight, Minecraft, Magic: The Gathering 2012, Avadon: The Black Fortress demo). I have yet to have the problem happen when I'm not playing a game. This system has been running stable for about 2.5 years prior to this. I didn't make any changes to the system prior to the problem starting to occur. System specs: OS: Windows 7 64-bit Processor: Intel Core 2 Duo E7200 Wolfdale 2.53GHz Video Card: XFX GeForce 9800 GT 512 MB Motherboard: Foxconn P45A-S LGA 775 Intel ATX RAM: Corsair 4 GB (2x 2GB) DDR2-800 (PC2 6400) Full specs: New PC 2008 Troubleshooting tried so far (the problem occurred again after taking each of these steps, one at a time): Updated the video drivers with the latest drivers from NVidia's site. Opened up the case and cleaned out the video card and processor fans (both were pretty dirty). Installed and ran temperature monitor software. The processor idles at about 50 degrees C, and goes up to about 63 degrees C while playing a game (seems on the warm side, but not excessively so?). The software wasn't able to report the temperature of the GPU -- not sure this particular GPU supports software temperature readout? My initial diagnosis is that maybe the GPU is on its last legs (given that it seems to be running pretty hot, and the problem only occurs while playing 3D games). Does this seem likely? Or is it likely that this problem is caused by the processor, RAM, or motherboard? Or could this be a software issue of some kind? Thanks for any advice!

    Read the article

  • OpenGL support no longer available

    - by Aznfin
    I've been using OpenGL hardware acceleration in programs such as Adobe Photoshop CS4 and Adobe After Effects CS4. I've noticed that recently the options for OpenGL previews are disabled because my graphics card seems to not support OpenGL. But that doesn't make any sense whatsoever. I know for a fact that my graphics card does have support for OpenGL and it worked before. I checked for driver updates just the other day. Anybody know what's going on? Info: Operating System: Windows 7 Home Premium 64-bit GPU: ATI Radeon HD 3200 Driver Packaging Version: 8.69-091211a-094296C-ATI Catalyst™ Version: 09.12 Provider: ATI Technologies Inc. 2D Driver Version: 8.01.01.994 2D Driver File Path: /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/CLASS /{4D36E968-E325-11CE-BFC1-08002BE10318}/0000 Direct3D Version: 8.14.10.0723 OpenGL Version: 6.14.10.9252 Catalyst™ Control Center Version: 2009.1211.1547.28237

    Read the article

  • How do I configure additional phone lines asterisk/trixbox?

    - by Matt
    I have a 4 port Digium card in there, and have 4 lines running smoothly. Now, we added ANOTHER 4 port card and have 4 more analog lines coming into the Trixbox server. It still runs the 4 fine, but what do I need to do to add the additional 4 phone numbers/lines? I want it to act exactly as before, there's nothing special about the new lines. We just need more lines so that when we have 4 out of state customers call, we can have 4 more call and not get the busy signal. Trixbox CE 2.8

    Read the article

  • Computer Components

    - by Martin
    What is the role of a motherboard in terms of how components communicate with the processor (via the system busses). Therefore, for each component, which communication bus is involved and what is the route that data takes from the component to the processor, including; The bus name Whether bus is serial or parallel The name of any bridges involved Also, what is the the role of a bridge The components are: Internal components: Floppy Drive, Hard Drive, CD/DVD Drive, Memory, Processor Power supply, Graphics card & Sound card External devices: Monitor, Keyboard, Mouse (PS2 & USB), Printer, Pen Drive I have absolutely no idea of what the routes are and how motherboards communicate, could someone give me a start here? Thanks.

    Read the article

  • Hyper-V extensible virtual switch disables network

    - by Sebastian Krysmanski
    I just installed the Hyper-V role on my Windows Server 2012. It comes with something called a "Hyper-V extensible virtual switch". I assigned it to the only network card in my server. By doing so, the network card became useless/disabled/inactive/.. because the virtual switch disabled all features (IPv4, IPv6, Client for Microsoft Networks, ...) on the network adapter. Is this supposed to happen? I admit I've no idea what this "extensible virtual switch" actually does. A short explanation would be nice as well.

    Read the article

  • Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendation?

    - by prs563
    We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

    Read the article

  • Why does DBAN crash on my HDDs?

    - by John Watson
    I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

    Read the article

  • Can I fill in an encypted PDF with iTextSharp?

    - by Cmpalmer
    I have a fillable, saveable PDF file that has an owner password (that I don't have access to). I can fill it out in Adobe reader, export the FDF file, modify the FDF file, and then import it. Then I tried to do it with iText(Sharp). I can't create a PdfStamper from my PdfReader because I didn't provide the owner password to the reader. Is there any way to do this programmatically or must I recreate the document? Even using FdfReader requires a PdfStamper. Am I missing anything? Anything legal that is - I'm pretty sure I could hack the document, but I can't. Ironically, recreating it would probably be ok.

    Read the article

  • Radeon hd 6570 black screen

    - by Sho
    I got some problem with new graphic card. Every time I use AMD Catalyst drivers on Windows or Linux, screen repeatedly goes black. This usually shows u when i open new cards in a browser, resize a window or run a program. Card runs smoothly on basic drivers but this means low resolution. 1940x1080 is native for my monitor so it causes a lot of problems. I've got a 600W Deus G1, so the power is not the problem. Maybe its a silly question, but would going form a vga cable to hdmi help to improve this situation? If not, can it be caused by slow processor or old mainboard? Im getting kinda confused about this whole thing...

    Read the article

  • Dell Dimension running Fedora12 does a "Sleeping Beauty" and I am not am not a "handsome prince"!

    - by Jim Dobbs
    Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

    Read the article

  • Java generics: What is the compiler's issue here? ("no unique maximal instance")

    - by Epaga
    I have the following methods: public <T> T fromJson( Reader jsonData, Class<T> clazz ) { return fromJson( jsonData, (Type)clazz ); } public <T> T fromJson( Reader jsonData, Type clazz ) { ... } The compiler is saying about the first method: type parameters of <T>T cannot be determined; no unique maximal instance exists for type variable T with upper bounds T,java.lang.Object return fromJson( jsonData, (Type)clazz ); ^ What is the problem?

    Read the article

  • What is this Cable for? 4 Pin to 2 Pin from Riser to Perc in Dell R410

    - by Kyle Brandt
    I got a new raid card for a R410 server since the S300 that came with it doesn't support raid with Linux (No work around for this if SAS from what I could find). Anyways, the RAID card has 2 pins on it and there is a cable that that connects to a 4 pin connection on the riser. The cable only has two wires, one black and one red. What is this cable for? My guess would be maybe LED status for the front panel or something like that, but I am just guessing....

    Read the article

  • Ubuntu 9.10 x64 has no sound, while Ubuntu 9.04 32 bit does.

    - by Macha
    I installed Ubuntu 9.10 x64 recently. Up until now I've been on 32 bit Ubuntu. For the first time since installing it, I went and tried to play a Youtube video. There was no sound. So a quick test to the system reveals that nothing will play sound (And I've tried turning the volume too full, as some have said output is quite quiet, but there is no sound at all). Further research shows that in sound preferences, the only output device listed was Dummy Output. Why would it work in 9.04 x86 and not 9.10 x64? While booting up, and occasionally with the sound preferences dialog open, I get a loud click (even though it isn't recognising my sound card). It's a Dell Studio 17 laptop. I'm not sure what the exact model of sound card is.

    Read the article

  • Install Chromium OS to SECOND internal drive on EEE 901?

    - by Andrew Swift
    I am trying to install the Chromium OS on an EEE PC 901, and I have succeeded in using Image Writer for Windows 0.2r23 to copy the IMG file to an SDHC card. Since the OS speed is limited by slow card access, I'd like to install the Chromium OS on the second, unused, internal SSD Drive, D:. However, Image Writer doesn't allow me to restore an internal drive from an IMG file. To be clear: I boot in XP on C: then run Image Writer to install the Chromium OS. Does anyone know how I can either convince Image Writer that D: is a removable drive or know of alternative program that will let me restore D: from an IMG file (non-windows file system)?

    Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >