Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 120/176 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• Touch Screen Ubuntu 10.04LTS

  - by WalterJ89

  I'm trying to get a touch screen working with Ubuntu 10.04LTS (64bit) -it is a serial touchsceen, connected at /dev/ttyS0 ,i know that works because I get garbage in the terminal when I enable it. -before the screen used a 3m driver (I believe) in XP. My knowledge of Linux is passive so I generally pick up something when I need it. To get this working I came accross a lot of tutorials (a lot outdated a bit), I'm still at a loss to get this work. I'm not sure where to put linux drivers (/usr/ or /dev/?) most tutorials kind of skip over that part. I have tried editing the /etc/X11/xorg.conf unsuccessfully. I'm not sure what the syntax for that is supposed to be. Thank You

  Read the article

• Are mobo raid controllers based on Intel ICH10R southbridge still considered software Raid?

  - by Breadtruck

  So do you still need specific software/drivers (intel matrix?) installed to manage the raid controller, setup the array. If the raid chipset is on-board the motherboard and it uses the CPU, and say I am using a Core 2 Quad Q9550, would a hardware based card still out perform the motherboard chipset? This is for a home workstation and I could spend $300 on a areca ARC-1210 PCI-Express x8 SATA II but I want to be able to justify the money for the raid card. My motherboard is a GIGABYTE GA-EP45-UD3P UPDATE: I was going to RAID5 using 4 500 GB drives, and I was going to buy a controller card but this article got me thinking hmmm....Toms-Southbridge Battle

  Read the article

• HP 1210 Scan Button does nothing.

  - by Jack M.

  I have an HP 1210 all-in-one nightmare of a printer which has decided not to listen to the scan button anymore. I've dug into it, and see in the properties of the scanner in Windows XP that it says "No applications are registered for this event" under what to do when the Scan button is pressed. I've tried re-installing the HP software, didn't help. Updated the drivers off the website, and downgraded them to the ones on the CD, neither had an effect. Is there any way to tell Windows to just open the Scan/Cammera wizard when I press the Scan button on the printer? Windows XP SP3, if that matters.

  Read the article

• OpenSolaris with no gcc vs. Nexenta with no ext3

  - by Jake Wharton

  I'm attempting to migrate my server from linux to a Solaris variant during a hardware upgrade. The machine is based around an Abit AN-M2 board which has an NForce chipset. I have what seems to be a chicken-and-egg problem of sorts: OpenSolaris 2009.06 does not recognize the NIC and I cannot compile the drivers for it as it also lacks gcc. I haven't tested as to whether or not I can mount an ext3 partition yet but its moot if there is no networking. Nexenta 3.0b3 recognizes the NIC but I cannot get the ext3 drives mounted due to FSWfspart refusing to install. I do not know much about Solaris but I wager this is due to the fact that Nexenta is based around Debian as well. While I am reusing the mobo/CPU combo, I did just spent a lot of money on the other hardware around it and would very much like to get it up and running smoothly and quickly. Does anyone have any suggestions that are not: Get a new mobo/CPU Run another OS Use alternate NIC

  Read the article

• BSOD 0x000000f4(Probably caused by : wininit.exe)

  - by vacuum

  I have BSOD with 0x000000f4 code. It appears when system is not loaded at all. No new hardware where intalled. Only nvidia drivers where updated 3 days ago and they are up to date for now(version 296.10). System Health Report(perfmon /report) shows nothing interesting(only complained on disabled UAC) System is on SSD disk(WDC SSC-D0064SC-2100 B) Dump Spec: OS Name Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601 System Manufacturer Gigabyte Technology Co., Ltd. System Model P31-DS3L System Type x64-based PC Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2534 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Award Software International, Inc. F9, 10.07.2008 Any suggestions?

  Read the article

• Is there a way to change the default sound volume on startup in windows?

  - by Logan Dam

  I've got a Creative X-Fi Titanium running on Windows 8, which works great, but the drivers have this weird quirk where it sets my headphones volume at 30% every time I boot if I have fast boot enabled. If I disable fast boot then it remembers my previous volume but I don't want to disable fast boot any more (I have an SSD, I want to use it :P) I've asked a similar question here before but as you can see the only "solution" was to disable fast boot, which I don't want to do anymore. Is there a command line tool that will let me set my volume or something similar that I can chuck in a batch file and run on startup, or anything else similar?

  Read the article

• External optical drive won't plug 'n play...sometimes.

  - by Connor

  alright, I've looked a lot of different ways, but here goes. i have an external DVD burner that connects via USB and should be plug 'n play however sometimes when I connect it a message pops up requesting any CD or installation software it came with. It didn't come with any though. The confusing part is that if I wait a couple weeks and plug it in, then it works fine, but if I turn it off and back on the problem arises again. I've tried different computers, same problem. There's little to no customer support from the company, Ativa, and no drivers for the product. I'm hoping there's a registry trick for this. any help?

  Read the article

• windows 7 losing wired ethernet connection

  - by Brandon Grossutti

  i have a win 7 machine with an Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller with latest drivers, the machine is upto date with all latest fixes etc. I have it connecting to a WRT310Nv2 router. Seemingly random, win 7 disconnects from the "Home Network" says its in a "public network", then resets the connection to an illegal 169 address. I have tried static ips, dhcp, all with the same results. This seems to have started shortly after i installed Vuze, so I uninstalled it but the problem persists. I know that the router is sound given that I have an XP machine attached with no issues of connectivity at all. I am at a complete loss and have tried everything, pleasse tell me i'm not the only one.

  Read the article

• windows 7 losing wired ethernet connection

  - by Brandon Grossutti

  i have a win 7 machine with an Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller with latest drivers, the machine is upto date with all latest fixes etc. I have it connecting to a WRT310Nv2 router. Seemingly random, win 7 disconnects from the "Home Network" says its in a "public network", then resets the connection to an illegal 169 address. I have tried static ips, dhcp, all with the same results. This seems to have started shortly after i installed Vuze, so I uninstalled it but the problem persists. I know that the router is sound given that I have an XP machine attached with no issues of connectivity at all. I am at a complete loss and have tried everything, pleasse tell me i'm not the only one.

  Read the article

• Backup VSS Issues

  - by MJ

  I've got this server, and we've been having VSS issues for quite awhile. We've tried every form of re-registering the VSS drivers we can think of. NTbackup won't run a system state backup vssadmin list writers doesn't list anything. We're getting VSS error 12302 in the event log. Has anyone ran into a situation like this before? We're thinking the next step, if possible, is a complete reinstall of the VSS. Any other ideas?

  Read the article

• Latitude E6410 - Screen flickering on Windows 8

  - by Martin

  On Windows 8, my Latitude E6410 screen (1440x900 - 60Hz - NVidia NVS3100M) is flickering. If I turn off the laptop for 30 minutes and turn it back on, there's no flickering but it eventually start again after 10-15 minutes. The flickering seems more present at the top and bottom of the screen. I already updated the graphic card drivers, bios, etc. Nothing seems to fix the issue. To prove that it isn't a hardware issue, when I reinstalled Windows 7 I couldn't reproduce the issue. Any idea what could cause this?

  Read the article

• Kernel config file generator

  - by lisak

  Hey guys, could please anybody recommend some kind of kconfig generator that would trim modules and built-in stuff that is not needed according to current hardware ? The best I have found is this : http://lkml.org/lkml/2008/9/16/290 I don't care about compilation time and the amount of modules that are not built-in. I'm concerned about performance. I don't know how much memory and runtime is wasted on huge kernels with almost everything possible. I'm a java developer and I don't know what most of the modules and drivers are for. So there is not much I can disable and be sure that I don't screw it up. Thanks in advance

  Read the article

• How to Connect Firewire Camcorder to Laptop without firewire port

  - by bdk

  I Have a Sony Camcorder w/ a 4-pin firewire output. I have HP laptop I want to use it with, but the laptop, does not have a firewire port, just VGA, HDMI, USB, ESATA, Ethernet, and Modem. In addition, It doesn't have a PC Card slot for adding a Firewire card. Googling for "Firewire to USB adapter" returns a lot of hits, but no product that seems to do what I want. I assume I need a USB dongle that gives a firewire port and has drivers so that the PC sees it as a regular firewire port. Thanks for any recommendations

  Read the article

• Preparing Automatic Repair appears out of nowhere & takes forever?

  - by Jörg B.

  I shutdown my work machine (Windows 8.1 Pro) without any errors appearing (and without installing any new software and especially no new drivers the last couple days) yesterday evening, turned it on this morning and it automatically started into 'Preparing Automatic Repair' mode. 1st of - is there any way to get more information WHY this is appearing out of the blue and.. 2ndly, how long is this usually supposed to take? This is a rather beefy machine (Intel 3770k / 4 core 3.9ghz, Intel SSDs only and 32 gb of ram) but this screen has been 'loading' for almost 1.5 hours now. Is there any sort of debug/verbose mode that would give me ANY indication what's going on?

  Read the article

• Networking not working in Windows 7 - "The account specified for this service is different from the account specified for other services"

  - by tog22

  I have a homebuilt computer with a GA-Z68MA-D2H-B3 motherboard with a Realtek RTL8111E LAN chip. Ethernet was working fine in Windows 7 until I reinstalled this OS, but now it's stopped, while still working in other OSes. I've tried reinstalling drivers from both the Gigabyte and Realtek sites to no avail; I've also plugged in and installed an Asus USB-N13 wifi dongle and this doesn't work oddly. How can I diagnose and fix this issue? In 'Network and Sharing Center' says "The account specified for this service is different from the account specified for other services running in the same process" under the heading 'Unknown'. Following the advice at http://www.sevenforums.com/network-sharing/130159-dependency-service-group-failed-start.html#post1122627 I've gone to 'Control Panel= Admin Tools= Services' and ensured the services listed at that URL are started (one - IIRC 'Come+ Event System' refused to start as user 'Local services' so I've had to set it to log on with the 'Local system account'... I suspect this may be part of the problem).

  Read the article

• Incorrect viewport on monitor everytime computer is booted

  - by doldertfo

  Hi, Every time I turn on my PC the viewport isn't aligned correctly on the screen - there is always a black strip on the right hand side. This is not a big issue as it can be resolved by pressing the menu button on the screen and doing a factory reset. However it is irritating having to do it every time. I am using a flat screen monitor with vga connections. The weird thing it never used to happen before with the tower Im using. Is potentially out of date drivers a problem? Thanks.

  Read the article

• Incorrect viewport on monitor everytime computer is booted

  - by dolderto

  Hello, Every time I turn on my PC the viewport isn't aligned correctly on the screen - there is always a black strip on the right hand side. This is not a big issue as it can be resolved by pressing the menu button on the screen and doing a factory reset. However it is irritating having to do it every time. I am using a flat screen monitor with vga connections. The weird thing it never used to happen before with the tower Im using. Is potentially out of date drivers a problem? Thanks.

  Read the article

• Sysprep on Windows 7 for a non-windows admin?

  - by askvictor

  I'm needing to use sysprep to deploy some Windows 7 machines. I can't find any resources that explain this very easily. In particular, I've loaded all of the programs I want for the image onto a computer. If I want to use prepares this for cloning onto 200 other machines, what steps would I need to take? Or do I need to start again, creating the image using 'audit' mode? The machines I'm using come pre-configured from the manufacturer with a host of custom drivers that wouldn't be fun to re-install - I'd rather use their base image to build upon. Cheers, Victor

  Read the article

• Sound from both speakers and headphones with SoundMAX ADI AD1986A on Windows 7: possible?

  - by oKtosiTe

  My ASUS A8N-VM CSM motherboard has an on-board sound chip–the SoundMAX ADI AD1986A. Although sound does work reliably on Windows 7, I was a bit disappointed that neither ASUS nor the manufacturer of the sound chip offer drivers for it for Windows 7 (or Vista for that matter). Among other things jack detection, output to front and read jack simultaneously and surround sound are no longer available using Microsoft's default HD Audio driver under Windows 7. Under Windows XP and several Linux distributions (Arch, Gentoo and Ubuntu) that I've tried everything works as it should. Since I switch between headphones and speakers quite often, this annoyance begs me to ask: aside from buying a sound card, is there any way to get sound from both outputs at the same time?

  Read the article

• PGP Desktop Whole disk Encryption paused on a toshiba ultrabook z935

  - by garg

  I have a Toshiba z930 Ultrabook with PGP Desktop installed for whole disk encryption. It installed correctly, and started encrypting but it stays paused. If I reboot, it shows me the PGP desktop username, password, domain screen. If I enter in my credentials, it allows me to get into windows but encryption remains paused. If I click on resume, it lets me enter a password, accepts it but then it doesn't do anything. One suspicious thing is that in the 'Select disk or partition to encrypt' box, it says, C: 120B fixed disk. Unknown Bus: TOSHIBA THNSNS12... Do I need to change something in the BIOS, or install any drivers so that it doesn't see it as an Unknown Bus?

  Read the article

• Vista x64: Improving troubleshoot approach skills

  - by Chau

  I'm not a Windows SuperUser, but neither just the regular user. I don't mind browsing the Registry, using Process Explorer, reading the Event logs, (un)installing new drivers and so on, but all this only makes me solve some problems. I tend though to run into problems where these tools aren't enough. Which tools should I learn about to improve my troubleshooting skills in Windows? Currently I'm using Windows Vista x64 (not moved to 7 yet), facing audio/video stuttering problems and I think this is a good place to improve my troubleshooting skills. I know this post is similar to this question, but my machine is only hanging occationally. Specs: Intel Q6600 Stock speed ASUS P5QD Turbo 4GB ram NVIDIA GTS-8800 640 HDA Xplosion 7.1 Seasonic 430W Windows Vista Business x64

  Read the article

• Windows printing: printer works locally, but over network it can't find driver

  - by JudahGabriel

  A friend has a Epson Stylus RX500 printer. She wants to share it between her WinXP desktop and her Win7 laptop. The printer is connected direct to her WinXP desktop, and she can print fine from there. But the Win7 laptop can't print -- it can see the shared printer on the network, but it can't find a driver for it. (And looking on the web, I don't see any Win7 drivers for it.) However, if I connect the printer directly to the Win7 laptop, it works, it can print. This suggests that there is a driver for it, but for some reason, it can't find a driver when connecting to the printer over the network. My question is: if a printer works when connected directly to the machine, should it still work over the local network?

  Read the article

• Windows 7 does not recognize hdmi audio output

  - by user30038

  I recently upgraded to Windows 7 on a Dell 545 MT with audio/video output via nVidia 9800 GTX+ to a flat screen television. I have installed/uninstalled/reinstalled all the most recent drivers from nVidia & realtek, but the machine will not recognize the hdmi output as a sound device (as it did previously in Vista). I troubleshot the problem with Dell for over an hour and was then directed to their software specialists who want $130 to fix the issue! Can anyone offer some insights on this? I've searched nVidia and Windows 7 forums w/o success and would really like to get sound coming back through my tv speakers. Many Thanks.

  Read the article

• Audio recording background noise

  - by Sergey

  For a long time time I've been trying to get rid of the background noise that appears in every audio recording I make with my computer. Tried different microphones, different sound setting, drivers. Interesting fact - the volume of this sound is equal whether I use and internal notebook microphone or an external one. I tried really good mics, so I'm sure the problem is not in it. Laptop on which this problem appears in HP Probook 4720. OS - Windows 7. P.S. Read an answer to a similar question: Annoying sound from microphone in headphone. Tried everything that was mentioned there. Only I don't have a "DC Offset Cancellation option". And when I disable "Noise Suppression" and "Acoustic Echo Cancellation", noise only becomes more noticeable. What should I do? EDIT: Example of the background noise I'm describing: http://eos-soft.com/files/noise.wma.

  Read the article

• How to customize Windows 7 HAL library during installation (BSOD STOP: 0x000000A5)?

  - by koldovsky

  While trying to install Windows 7 x86 Ultimate on Samsung M40 laptop (Pentium M 1.7 Dothan, 2 GB RAM/ 100 GB HDD) i receive BSOD STOP: 0x000000A5: The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. The bios on the system is updated to latest version. If ACPI is the real source of the issue it means that I possibly could use another HAL library. In Windows XP it is possible to install system with generic HAL library pressing F7 when installer asks to supply drivers, but on Windows 7 I can't find such option. Ironically, Vista installs and works nice, even if they said that Windows 7 is less demanding for hardware. Windows 7 Advisor also tells nothing suspicious. Can anybody tell me how to customize Windows 7 installer to use generic HAL library (if it is possible, of course) or point me to another solution?

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >