Search Results

Search found 4109 results on 165 pages for 'plan'.

Page 120/165 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• wrt54gl reboots; troubleshooting steps?

  - by Bill

  I am using about 10 wrt54gl's in a small school. I am using a combination of stock firmware and Tomato 1.25, slowly moving towards all Tomato. We have had these devices installed for several years without problems. Recently, more and more of the units have started to spontaneously reboot, usually during high-traffic times (but not always). For the most part, the rebooting is not critical for us, but the wrt54gl's temporarily revert to 192.168.1.1 on the LAN ethernet ports and conflict with a critical server that's already installed with that IP. (Yes -- we plan to move the server off that address, but it is an involved process.) Both Tomato and the stock firmware (several versions from recent to several years old) exhibit the same problem: random reboots and reverting to 192.168.1.1 and conflicting temporarily with our server until the firmware boot process finishes. Here are my questions: Any way to prevent the wrt54gl's from reverting to 192.168.1.1 during the boot process? I was thinking of doing a custom firmware mod, although I hate to go that direction. Any steps to take in troubleshooting the reboots? Only some of the wrt54gl's reboot, which is odd. Others stay online for weeks and months without issues. Thanks.

  Read the article

• Re-configure Office 2007 installation unattended: Advertised components --> Local

  - by abstrask

  On our Citrix farm, I just found out that some sub-components are "Installed on 1st Use" (Advertised), which does play well on terminal servers. Not only that, but you also get a rather non-descriptive error message, when a document tried to use a component, which is "Installed on 1st Use" (described on Plan to deploy Office 2010 in a Remote Desktop Services environment): Microsoft Office cannot run this add-in. An error occurred and this feature is no longer functioning correctly. Please contact your system administrator. I have ~50 Citrix servers where I need to change the installation state of all Advertised components to Local, so I created an XML file like this: <?xml version="1.0" encoding="utf-8"?> <Configuration Product="ProPlus"> <Display Level="none" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" /> <Logging Type="standard" Path="C:\InstallLogs" Template="MS Office 2007 Install on 1st Use(*).log" /> <Option Id="AccessWizards" State="Local" /> <Option Id="DeveloperWizards" State="Local" /> <Setting Id="Reboot" Value="NEVER" /> </Configuration> I run it with a command like this (using the appropriate paths): "[..]\setup.exe" /config ProPlus /config "[..]\Install1stUse-to-Forced.xml" According to the log file, the syntax appears to be accepted and the config file parsed: Parsing command line. Config XML file specified: [..]\Install1stUse-to-Forced.xml Modify requested for product: PROPLUS Parsing config.xml at: [..]\Install1stUse-to-Forced.xml Preferred product specified in config.xml to be: PROPLUS But the "Final Option Tree" still reads: Final Option Tree: AlwaysInstalled:local Gimme_OnDemandData:local ProductFiles:local VSCommonPIAHidden:local dummy_MSCOMCTL_PIA:local dummy_Office_PIA:local ACCESSFiles:local ... AccessWizards:advertised DeveloperWizards:advertised ... And the components remain "Advertised". Just to see if the installation state is overridden in another XML file, I ran: findstr /l /s /i "AccessWizards" *.xml Against both my installation source and "%ProgramFiles%\Common Files\Microsoft Shared\OFFICE12\Office Setup Controller", but just found DefaultState to be "Local". What am I doing wrong? Thanks!

  Read the article

• Using mixed disks and OpenFiler to create RAID storage

  - by Cylindric

  I need to improve my home storage to add some resilience. I currently have four disks, as follows: D0: 500Gb (System, Boot) D1: 1Tb D2: 500Gb D3: 250Gb There's a mix of partitions on there, so it's not JBOD, but data is pretty spread out and not redundant. As this is my primary PC and I don't want to give up the entire OS to storage, my plan is to use OpenFiler in a VM to create a virtual SAN. I will also use Windows Software RAID to mirror the OS. Partitions will be created as follows: D0 P1: 100Mb: System-Reserved Boot D0 P2: 50Gb: Virtual Machine VMDKs for OS D0 P3: 350Gb: Data D1 P1: 100Mb: System-Reserved Boot D1 P2: 50Gb: Virtual Machine VMDKs for OS D1 P3: 800Gb: Data D2 P1: 450Gb: Data D3 P1: 200Gb: Data This will result in: Mirrored boot partition Mirrored Operating system Mirrored Virtual machine O/S disks Four partitions for data In the four data partitions I will create several large VMDK files, which I will "mount" into OpenFiler as block-storage devices, combined into three RAID arrays (due to the differing disk sizes) In effect, I'll end up with the following usable partitions SYSTEM 100Mb the small boot partition created by the Windows 7 installer (RAID-1) HOST 50Gb the Windows 7 partition (RAID-1) GUESTS 50Gb Virtual machine Guest VMDK's (RAID-1) VG1 900Gb Volume group consisting of a RAID-5 and two RAID-1 VG2 300Gb Volume group consisting of a single disk On VG1 I can dynamically assign storage for my media, photographs, documents, whatever, and it will be safe. On VG2 I can dynamically assign storage for my data that is not critical, and easily recoverable, as it is not safe. Are there any particular 'gotchas' when implementing a virtual OpenFiler like this? Is the recovery process for a failing disk going to be very problematic? Thanks.

  Read the article

• Getting Grub2 to recognize a Raid 10 boot/root

  - by xenoterracide

  I've been trying to get my raid to boot from grub2 for about 2 days now and I don't seem to be getting closer. The problem appears to be that it doesn't recognize my raid at all. It doesn't see (md0) etc. I'm not sure Why or how to change this. I'm using mdadm, 2 device (essentially a raid1) raid10,f2, which is currently degraded. I have tried adding the raid and mdraid modules with grub install along with others. I've tried several variation on grub-install such as grub-install --debug --no-floppy --modules="biosdisk part_msdos chain raid mdraid ext2 linux search ata normal" /dev/md0 I've been searching the net for an answer to what I haven't done but no luck. On my other drive which I plan on removing the raid is initialized and mounted fine on boot, but it's not the boot/root for that setup. My grub.cfg isn't recognized by grub since it can't read the raid partition so I'm not posting that. md0 is not listed in my /boot/grub/device.map.

  Read the article

• Nginx's speed, and how to replicate it [migrated]

  - by Mediocre Gopher

  I'm interested in this from more than an academic standpoint rather than a practical standpoint; I don't plan on creating a production webserver to compete with nginx. What I'm wondering is how exactly nginx is so fast. The top google response for this is this thread, but it merely links to a cryptic slideshow and a general covering of different io strategies. All other results seem to simply describe how fast nginx is, rather then the reason. I tried building a simple erlang server to try to compete with nginx, but to no avail; nginx won out. All my server does is spawn a new process for each request, uses that process to read the file to a socket, then closes the file and kills the thread. It's not complicated, but given erlang's lightweight processes and underlying aio structure I thought it would compete, but nginx still wins out by a consistent 300 ms average under a heavy stress test. What is nginx doing that my simple server isn't? My first thought would be keeping files in main memory instead of tossing them between requests, but the filesystem cache does this already so I didn't think it would make that great of difference. Am I wrong? Or is there something else that I'm missing?

  Read the article

• Hardening non-root standalone Linux Tomcat install

  - by NoozNooz42

  I want to know if you have any tips as to how to strengthen the security of a non-root install of Tomcat in standalone mode once Tomcat is already installed in a non-root account, in standalone mode. I precise this because, for example, I'm not at all interested by the answers given here (because both Java and Tomcat requires root priviledges there to be installed and I've got zero interest in running jsvc): http://serverfault.com/questions/43765 So far, here's what I've done for my non-root standalone Tomcat 6 install: download and install the JRE .bin provided by Oracle/Sun (no need to be root here) (no need for a full JDK anymore right seen that Jasper [Tomcat's JSP engine] has its own compiler now right?) download and tar -xzf tomcat 6 (no need to be root here) set up transparent port-forwarding (must be root here) Note that my distribution is a Debian one and I have exactly zero interest in downloading Debian package / backports / whatever... Because, once again, I DO NOT want to need to be root to install Java & Tomcat. The only moment I needed to be root was to configure the firewall to transparently do the port forwarding 80 <-- 8080 and 443 <-- 8443. I then deleted all the default webapps but one: cd ~/apache-tomcat-6.0.26/webapps rm -rf docs rm -rf examples/ rm -rf manager/ rm -rf ROOT/ What about the directory ~/apache-tomcat-6.0.26/webapps/host-manager, do I need it or can I delete it? So, once I've installed Tomcat standalone in a non-root account (and taken into account that I don't want to enter the root password anymore and that I don't plan to install the whole Apache shebang), what more can I do? Are there connectors I can disable? (how?)

  Read the article

• New XPC: No video, no ethernet link, but drive spins

  - by Mike Pennington

  I bought a Shuttle XPC SH67H3 with integrated video. I installed: An Intel i5 2450P 16GB DDR3 RAM A SATA hard drive from my old linux server that still is bootable I have both power connectors plugged into the motherboard. I realize that the Intel i5-2450P doesn't have video capabilities; however, the drive spins like it's doing something useful. It seems like I should get an ethernet link light when I fire this up. I plan to run this headless anyway, so it would be really nice if I could figure out how to run this without a video card at all. I know the IP address and login info for the linux install on the disk. I plugged in speakers, but get no bios beeps when I power it up. Shuttle's bios manual has nothing in there that indicates I should have problems in this configuration. My questions: Is there a reason that the missing video card would block usage of the ethernet port? Are there settings on the motherboard / bios I can change to get this working?

  Read the article

• How does the LeftHand SAN perform in a Production environment?

  - by Keith Sirmons

  Howdy, I previously asked this ServerFault question: Does anyone have experience with lefthands VSA SAN The general consensus looks like it does not perform well enough for a production SQL server even at a light load. So the new question is, How does LeftHand's SAN perform on the HP or Dell dedicated Hardware boxes? We are looking at the Starter SAN with 2 HP nodes in a 2-way replication, 2 ESX servers hosting a total of 2 Active Directory server, 1 MS SQL server, 1 File Server, and 1 General Purpose Server for things like Virus Scan (All Microsoft Server 2005 or 2008). The reason I am looking at LeftHand is for the complete software package. I plan to have a DR site and like how the SAN can perform an Async Replication to the offsite location without having to go back to the Vendor for more licenses. I also like the redundancy built into the Network Raid architecture. I have looked at other SANS and found different faults with them. For example, Dell's EqualLogic: Found that although the individual box is very redundant in hardware, the Data once spanned across multiple boxes is not redundant, if a node goes down you have lost the only copy of the data sitting on that hardware (One thing is certain, all hardware fails... When? is the only question.). I have used an XioTech SAN as well.. Well worth the money BTW, but I think it is overkill for the size of the office I am targeting. The cost to get the hardware redundancy in the XioTech makes it a little out of reach for the budget I am working in. Thank you, Keith

  Read the article

• Apache, suexec, PHP, suPHP

  - by Chris_K

  While I'm quite comfortable as a Linux user, my Linux Admin-fu is a bit weak. Thus, I'm here looking for guidance with a CentOS server I'm about to build. I need to setup an Apache2 web server for a few of our clients. I want each client's web content to be under their home directory (USERDIR in apache.conf, right?) for the static HTML sites. I want Apache to run as the client (suexec?). Some of their stuff will be PHP apps and I'm under the impression I'll want to look at suphp as well then. So basically I want to look like a small version of a shared web hosting company. Considering how common those are I thought I'd easily find a nice current How-To guide on setting this all up but so far I've had very little luck. I suspect my search words are off. So the questions (feel free to answer any or all): Anyone have some solid links to current/modern guides that would help me set this all up? No, the apache documentation site is not a guide ;-) Since I have a mix of static sites and PHP apps do I want/need both suexec and suphp installed? If so, does that introduce any challenges I should be aware of? Should I be looking at other options instead of suexec and suphp? I plan to give the end users SSH, SFTP or SCP access to their stuff (if that affects anything). Thanks in advance for your help.

  Read the article

• Join ActiveDirectory (Win 2k8R2) to OpenDirectory(Snow Leopard)

  - by Tom O'Connor

  The vast majority of questions and so on regarding the interoperability of Active and Open directories involves getting Mac clients to see an AD and auth against it. What we'd like to do is get a Windows 7 workstation to auth completely against Open Directory. We tried setting it up as an NT4 type PDC, and that doesn't work satisfactorily. We tried using pGina and the LDAP backend, which allows Authentication, but has no support for Authorization, and as a result, if we mount an NFS Share, the user has the rights to do anything they damn well please. Not ideal for security (Totally bloody unacceptable, actually). We tried using a Samba server (newer version than on the Open Directory Server) as an intermediate, so that it knows about the LDAP server on the OD Server, but uses Samba 4 instead of v3. That didn't work either. We could login, but couldn't mount, and if we did, we had the same rights as with pGina. If we right-click the mounted drive in Windows, and have a look at NFS UID, it returns -2, not the correct (mapped) UID. So the final plan I've got is to use an Active Directory, inside a Windows 2008R2 Virtual Machine. What I want to achieve is to have the Active Directory sync it's user data from OpenDirectory (read-only would be fine). That way, we'd have the ability to connect Windows 7 clients to a "virtual domain" which would actually just grab information from OD's LDAP. All the information I've found is about how to go the other way. Does anyone know how we can do this?

  Read the article

• LSI 9260-8i w/ 6 256gb SSDs - RAID 5, 6, 10, or bad idea overall?

  - by Michael Pearson

  We're provisioning a new production server for our reasonably busy website. Our choice of host have available a 6 drive configuration with a LSI 9260-8i card. My initial thought was to fill all six bays with SSDs (Intel 520 256gb) and set them up in RAID. Good, bad, or terrible idea? Can the card handle it? Should we be using RAID 5, 6 or 10? This would be the first time the provider have filled all six slots for this rackmount with SSDs, so they're a bit hesitant. I'm wondering if somebody else with this card has done something similar in a production environment. We do about 43gb of writes per day and currently use about 300gb of storage. The server acts as webserver, database, and image store for approx 1 million files. The plan is to underprovision the SSDs by approximately 10% to 20% to increase their overall lifespan & performance. The fallback option is 2x480gb SSDs in RAID 1 and another 2x1TB HDDs in RAID 1. The motivation behind this is that the server rental cost difference between 2xSSDs and 6xSSDs is minimal (compared to the overall cost of the rental). We do not have any special high-IOPs requirements. However, if the configuration is known to work, I don't see a good reason to not use it and not have to worry about having separate 'fast and small' and 'slow and large' disks.

  Read the article

• Sporadic crash of master-slave MySQL replication process

  - by obarshay

  Hello, I was wondering if someone has experienced this and can perhaps provide some insight into this issue. We have a plan-vanilla MySQL master-slave replication set up. The tables are MyISAM and the master can get quite read/write active. We use the slave instance to perform full daily backups in order to avoid bringing down the master server. The backup process does the following: STOP SLAVE SQL_THREAD mysqlhotcopy all tables START SLAVE SQL_THREAD Every once in a while (once a month or so) the replication breaks with varying error messages indicating a corrupt query or log file. Here's one that happened last night: mysql> show slave status \G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: server8.propreports.com Master_User: nexus8 Master_Port: 3306 Connect_Retry: 60 Master_Log_File: bin.000045 Read_Master_Log_Pos: 581644327 Relay_Log_File: relay.000086 Relay_Log_Pos: 94131 Relay_Master_Log_File: bin.000045 Slave_IO_Running: Yes Slave_SQL_Running: No Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 1064 Last_Error: Error 'You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '138070603'£' at line 1' on query. Default database: 'wtsdb'. Query: 'UPDATE fill SET clearing_fee='0.0E id='138070603'£' Skip_Counter: 0 Exec_Master_Log_Pos: 4164743 Relay_Log_Space: 577574251 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL I follow the following procedure to recover from above error and resume replication: stop slave; change master to MASTER_LOG_POS = 4164743, MASTER_LOG_FILE = 'bin.000045'; start slave; We have multiple servers set up this way and they all sporadically stop replicating with a similar error. Any advice on how to resolve this would be greatly appreciated.

  Read the article

• Advance DNS - Redirecting Emails to new webhost

  - by Martin

  I am not to sure if this question belongs here but I will surely find out soon enough. I have two web hosts (Not sure why it has been setup this way but it has). I do not want to use the original web host to handle the emails as the Data that we get from them is 500 mb which is already full with hosting the website. The second web host has an unlimited data plan and was created so we could use this host for the email accounts. Now the problem is I have reset the Advance DNS Zone records on both accounts and I am not sure what they were before. (Silly me should have taken a backup of how it was setup before hand I know) Emails were working before and going to the second hosts server now they are going to the first host but it has no email addresses setup for use so all emails are bouncing saying that the address does not exist. Host 1 IP: 192.185.96.110 Host 2 IP: 27.54.88.66 So far I have changed the Advanced DNS Zone record on Host 1 with the following: A Record: mail.australisinstitute.qld.edu.au - 27.54.88.66 I have not made any changes on Host 2 and both hosts have the default MX Records. If I need to provide any more information I can but I just hope someone can decipher what I have said haha. Cheers in advance!

  Read the article

• fedora apache/nginx pylons

  - by microchasm

  I'm trying to wrap my head around Pylons and how it works. So far... it's been confusing... I'm using EC2 with Fedora8. Everything is working so far (i.e. I have Pylons/python et al installed and after creating a test app and running paster serve I can access the default page via my domain name). As the Pylons docs explain and as I understand, the built in paster serve server is not suited for a production environment. What I am not clear on, then, is what to do next... It seems like nginx is a good option, but I am more familiar with Apache (like .0002%). I plan on having virtualhosts (which nginx says can accomodate). However, I am totally unclear on how the big picture is supposed to work. In order to serve an app, does paster serve need to be running? Does then nginx/apache basically just act as a proxy to shuttle connections to the paster server? How do I start it so it doesn't terminate after closing the ssh connection? If running multiple apps, what do I set as the host/port in development.ini to differentiate the apps? Or if this is not the right way, how do I differentiate beween apps? I am more familiar with MySQL, but willing to negotiate PostgreSQL if it's a better fit. Is it? Is virtualenv a prerequisite to running multiple apps on the same machine? Thanks in advance for any tips.

  Read the article

• Which database to use and system/db administration by layman [closed]

  - by blah

  So my friend and I got briliant ;) idea for a business. Since it is not predictable whether it will work out or not, we decided to keep cost as low as possible to start with, in particular not to hire anyone. If it will work out as expected it will generate enough profit to hire professionals in few months. But for the first few months we'll be doing everything by ourselfs. He's a business/finance major, and I'm a software developer, so obviously I have to take care of IT :) It will be a webapp, written in python/django. My questions regarding this project: 1) What database should I choose? I'm experienced with oracle, and have been working with SQL Server for a while, but both of them are too expensive(at least now). It's a developer experience, I've never done any dba stuff. I'm looking for something free(as in beer). Looks like MySql or PostgreSQL are most popular in this sector. I would appreciate any comments on which db to choose. I'm open to any suggestions(it doesn't have to be MySql or Postgre). Here's what I know about data: It will be almost dates and numbers, a little bit of text. Searched mainly by dates. Data will almost never be updated, mostly inserted and browsed. From 30k to 300k new records/month. 2) Servers. My idea is to rent two dedicated servers. During normal operation one would be a web server(debian/apache), other would be a db server(debian/?). My recovery plan is to install everything on both, and in case of trouble with one of machines just run everything on the other one. Does it even makes sense? Any other tips appreciated. Thanks.

  Read the article

• How to configure VirtualBox server for performance at home

  - by BluJai

  I currently have two physical Ubuntu Server 10.10 servers at home: one serves as our firewall/router/DHCP/VPN server and the other performs double-duty as a file server and a VirtualBox host for an Ubuntu Desktop 10.10 machine which I use from remote connections (via NoMachine) for many thin-client purposes which are irrelevant to my question. What I'd like to accomplish is to consolidate the two physical machines into one which is a dedicated VirtualBox host (most likely running Ubuntu Server 10.10). Note that I'd like to stick with VirtualBox (if possible) because I'm most comfortable with it and use it on a daily basis at both home and work. Specifically, I plan to have one VM set up as file server, another as the firewall/router/DHCP/VPN (or possibly split those a bit) and a third, which is the only current VM (already VirtualBox), which is the thin-client host. My question comes down to performance and/or recommendations about the file server VM. The file server hosts about 6 terabytes of data across 4 drives. What I'd like to do is use raw disk access from the VM directly to the existing disks. However, I'm curious what performance advantage/disadvantage that would have as compared to using shared folders from the VM host and basically just have the whole drive served as a shared folder to the VM which would then serve it to the other machines on the network. I don't know if virtual disks would even work in this scenario and I certainly wouldn't want a drive to be filled with just a single file which is 1.5 TB (disk image). To add understanding of context, but not to get additional advice, I want to virtualize these machines because I intend to regularly use the snapshot capabilities of VirtualBox for the system disks (which will be virtual drives) of the VMs and I have some physical space/power needs to address (as I mentioned, this is at home).

  Read the article

• How can I split 200Mbps of streaming traffic into routers?

  - by Jared

  As the title says, I have 200Mbps of streaming video traffic coming into my command center. How do I split the load between routers? Setup is like this: fiber --- router --- switch --- workstations I'm sorry I haven't dealt with this much traffic before. so please be gentle if you're going to kick me out :) EDITED FOR DETAILS: Okay, this specific project is for our company's IP CCTV system. We have deployed over 100++ cameras all over a building/campus and we have estimated each camera to take about 2Mbps of bandwidth each. Now, they're all connected to a switch and that's entirely fine. But coming into our command center, they have to be on a router since it'll get more than 200++ cameras next year (and I don't want to have too many hosts on one subnet). My plan was to have the 1st hundred on a 172.16.9.x block and the 2nd hundred on a 172.16.10.x block (all /24). The servers I have are currently sized to match (about 5 dual 6-core xeons) and I'd have about 19 workstations all streaming video from the 5 servers. (servers pull video from the cameras). But 200Mbps of constant traffic? How the hell do I even break this up? I need to have 1 gateway, to manage the routes... I honestly think I'm way in over my head.

  Read the article

• COMPAQ Tower No Signal to monitor

  - by Lancelot

  Hi there, I have had some troubles with this: I received a compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. It was given to me on condition i give her the files back. My plan was to turn this into an Ubuntu Server. It booted up no problems even with the ubuntu live disc. After a normal shutdown(not unpluggin the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks etc. Thus i checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower now boots. It booted into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which i assure work perfectly but not with this tower(i recall it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since i am not using an external Video Card, this is onboard VGA. Thanks!

  Read the article

• Windows Server 2003 DC hangs after network drivers update

  - by tcv

  Earlier today, we attempted to update the Broadcom BCM5716C network drivers on a Windows Server 2003. (Dell PowerEdge T310, FWIW). Since then we have not been able to boot the server in any normal mode. Safe Mode works. Safe Mode with Networking and regular bootups hang at "Applying Network Settings." I haven't tried Last Known Good Configuration nor have I tried Directory Services Restore Mode. I should also mention that the longest I've allowed "Applying Network Settings" was perhaps 30 minutes. I spoke to Dell since the server is under a basic warranty. They sent me the original Broadcom drivers. The trouble seems to be, however, that since I can only boot in Safe Mode, I can't install the application package as given. In safe mode, I receive the error: "The system administrator has set policies to prohibit this installation." I can install the drivers independently, but that doesn't allow the NICs to work. The most I've been able to get are Code 10 errors on each NIC. I plan to get back to the site tomorrow to attempt installation of a different NIC. I'm wondering what else I can try.

  Read the article

• Is the sysadmin/netadmin the defacto project planner at your organization?

  - by gft74

  At my company it has somehow over the past few years slowly become my job to come up with a project plan, milestones and time lines for deployment of developer applications. Typical scenario: My team receives a request for a new website/db combo and date for deployment. I send back a questionnaire for the developer to fill out on all the reqs for the site (ssl? db? growth projections etc.) After I get back all the information, the head of development wants a well developed document of what servers will it live on why those servers what is the time line for creating the resources step-by-step SOP for getting the application on the server and all related resources created (dns, firewall, load balancer etc.) I maybe just whining but it feels like this is something better suited to our Project Management staff (which we have) or to the developer. I understand that I need to give them a time-line on creating the resources, but still feel like this is overkill. We already produce documentation on where everything lives and track configuration changes to equipment. How do other sysadmin folks handle this?

  Read the article

• graphics performance better on battery?

  - by Scott Beeson

  Anyone have any idea why my laptop would perform (considerably) better while on battery than while plugged in? It's a Dell Latitude E6420 with Windows 8 Pro. I tried mirroring all the settings in the selected power plan from "On battery" to "Plugged In" and that didn't help. I then just restored the defaults for all power plans (balanced and high performance). I'm still seeing the same results. The best example where it is most noticeable (don't laugh) is Sim City Social in Chrome. I'm probably seeing a performance increase of 5x on battery versus plugged in. This is easily reproducible too. I'm very confused. Could it be caused by dust? The laptop isn't that old and there is no visible dust. I'm not going to take it apart to check the insides as it's a corporate laptop. Could it be overheating? Battery Sim City Social: 68 degrees max Civ V: 77 degrees max Charger Sim City Social: 68 Civ V: did not test See answer below... I'm retarded

  Read the article

• Can't make Dovecot communicate with Postfix using SASL (warning: SASL: Connect to private/auth failed: No such file or directory)

  - by Fred Rocha

  Solved. I will leave this as a reference to other people, as I have seen this error reported often enough on line. I had to change the path smtpd_sasl_path = private/auth in my /etc/postfix/main.cf to relative, instead of absolute. This is because in Debian Postfix runs chrooted (and how does this affect the path structure?! Anyone?) -- I am trying to get Dovecot to communicate with Postfix for SMTP support via SASL. the master plan is to be able to host multiple e-mail accounts on my (Debian Lenny 64 bits) server, using virtual users. Whenever I test my current configuration, by running telnet server-IP smtp I get the following error on mail.log warning: SASL: Connect to /var/spool/postfix/private/auth failed: No such file or directory Now, Dovecot is supposed to create the auth socket file, yet it doesn't. I have given the right privileges to the directory private, and even tried creating a auth file manually. The output of postconf -a is cyrus dovecot Am I correct in assuming from this that the package was compiled with SASL support? My dovecot.conf also holds client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } I have tried every solution out there, and am pretty much desperate after a full day of struggling with the issue. Can anybody help me, pretty please?

  Read the article

• How to configure VirtualBox server for performance at home

  - by BluJai

  I currently have two physical Ubuntu Server 10.10 servers at home: one serves as our firewall/router/DHCP/VPN server and the other performs double-duty as a file server and a VirtualBox host for an Ubuntu Desktop 10.10 machine which I use from remote connections (via NoMachine) for many thin-client purposes which are irrelevant to my question. What I'd like to accomplish is to consolidate the two physical machines into one which is a dedicated VirtualBox host (most likely running Ubuntu Server 10.10). Note that I'd like to stick with VirtualBox (if possible) because I'm most comfortable with it and use it on a daily basis at both home and work. Specifically, I plan to have one VM set up as file server, another as the firewall/router/DHCP/VPN (or possibly split those a bit) and a third, which is the only current VM (already VirtualBox), which is the thin-client host. My question comes down to performance and/or recommendations about the file server VM. The file server hosts about 6 terabytes of data across 4 drives. What I'd like to do is use raw disk access from the VM directly to the existing disks. However, I'm curious what performance advantage/disadvantage that would have as compared to using shared folders from the VM host and basically just have the whole drive served as a shared folder to the VM which would then serve it to the other machines on the network. I don't know if virtual disks would even work in this scenario and I certainly wouldn't want a drive to be filled with just a single file which is 1.5 TB (disk image). To add understanding of context, but not to get additional advice, I want to virtualize these machines because I intend to regularly use the snapshot capabilities of VirtualBox for the system disks (which will be virtual drives) of the VMs and I have some physical space/power needs to address (as I mentioned, this is at home).

  Read the article

• What does a status of "Backup" mean for Windows 7 local user profiles?

  - by Howiecamp

  Summary: Upon logging on to Windows 7 RTM I get a message that my profile can't be loaded and a temporary user profile is created. I logged off and back on as Administrator. The user profiles dialog shows my user profile with a Type of "Local" and a Status of "Backup" rather than "Local" which it should be. How can I change this to make my user profile accessible? The long story: My PC has a single hard drive partitioned into a C: and a D:. I'd moved my user profile directory (c:\Users) to d:\Users, removed c:\Users and then used mklink.exe to create a directory symbolic link c:\Users -- d:\Users. Worked like a charm since I did it. Today, I make a System Restore Point for drives C: and D:. Next, I dismounted D: and used the Disk Management tool to remove the "D:" drive letter from the D volume. (My plan was to reboot and then redirect the symbolic link.) Upon reboot, I got the user profile error described above. Finally, I restored the System Restore Points that I'd created for both drives and then rebooted again. Same issue.

  Read the article

• An easily customizable linux distribution using minimal disk space?

  - by Frank

  I'm looking for a linux distribution that can be easily used to create my own distribution that's the same system with some software installed. So basically I should be able to create an iso which, when installed, will have the linux distribution with my desired installed. More specifically, I plan on installing mysql and a bit of my own software which shouldn't be too big. However, this distribution needs to be extremely small in terms of disk space. The distribution, including mysql should not exceed 100mb. It should, of course still be able to connect to the internet and perform other standard functions. I don't need X/any sort of window manager, and would prefer not to have it since it would increase disk usage. Currently I have tried ttylinux and tiny core linux. I've found that ttylinux, while is extremely small, has almost nothing so that mysql can't even be installed. Tiny core linux, on the other hand is a bit too big. I've found openembedded and linux from scratch, but I would prefer for the install and build process to be much easier. What other distribution would you recommend for my purposes? Minimizing disk usage is the most important, followed by ease of installing and creating the custom distribution.

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >