Search Results

Search found 4426 results on 178 pages for 'bunch'.

Page 121/178 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• Periodic internet connection drops

  - by sterlingholt

  My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

  Read the article

• Configure samba server for Unix group

  - by Bird Jaguar IV

  I'm trying to set up a samba server with access for users in the Linux (RHEL 6) "wheel" group. I am basing smb.conf off of the example here where it goes through the [accounting] example. In my smb.conf I have [tmp] comment = temporary files path = /var/share valid users = @wheel read only = No create mask = 0664 directory mask = 02777 max connections = 0 (rest of the output from $ testparm /etc/samba/smb.conf is here). And groups `whoami` returns user01 : wheel. When I use the following command from another machine (Mac OS) as the Linux user (user01): $ smbclient -L NETBIOSNAME/tmp it asks for a password, I hit return without a password, and get: Enter user01's password: Anonymous login successful Domain=[DOMAIN] OS=[Unix] Server=[Samba 3.6.9-151.el6_4.1] Sharename Type Comment --------- ---- ------- tmp Disk temporary files IPC$ IPC IPC Service (Samba Server Version 3.6.9-151.el6_4.1) But when I try $ smbclient //NETBIOSNAME/tmp I try entering the password I use for the Linux login, and get a bunch of stuff logged, including check_sam_security: Couldn't find user 'user01' in passdb. ... session setup failed: NT_STATUS_LOGON_FAILURE (I can give more logging information if it would be helpful.) I can't find a reference to more steps I need to add group users in the resource. Should I be manually adding samba users from the group somehow? Thank you

  Read the article

• What is the fastest way to clone an INNODB table within the same server?

  - by Vic

  Our development server is a replication slave of our production server. We have a script that developers use if they want to run their applications/bug fixes against fresh data. That script looks like this: dbs=( analytics auth logs users ) server=localhost conn="-h ${server} -u ${username} --password=${password}" # Stop the replication client so we don't encounter weird data. echo "STOP SLAVE" | mysql ${conn} # Bunch of bulk insert optimizations echo "SET autocommit=0" | mysql ${conn} echo "SET unique_checks=0" | mysql ${conn} echo "SET foreign_key_checks=0" | mysql ${conn} # Restore all databases and tables. for sourcedb in ${dbs[*]} do destdb=${prefix}${sourcedb} echo "Dropping database ${destdb}..." echo "DROP DATABASE IF EXISTS ${destdb}" | mysql ${conn} echo "CREATE DATABASE ${destdb}" | mysql ${conn} # First, all the tables. for table in `echo "SHOW FULL TABLES WHERE Table_type <> 'VIEW'" | mysql $conn $sourcedb | tail -n +2`; do if [[ "${table}" != 'BASE' && "${table}" != 'TABLE' && "${table}" != 'VIEW' ]] ; then createTable=`echo "SHOW CREATE TABLE ${table}"|mysql -B -r $conn $sourcedb|tail -n +2|cut -f 2-` echo "Restoring ${destdb}/${table}..." echo "$createTable ;" | mysql $conn $destdb insertData="INSERT INTO ${destdb}.${table} SELECT * FROM ${sourcedb}.${table}" echo "$insertData" | mysql $conn $destdb fi fi done done echo "SET foreign_key_checks=1" | mysql ${conn} echo "SET unique_checks=1" | mysql ${conn} echo "COMMIT" | mysql ${conn} # Restart the replication client echo "START SLAVE" | mysql ${conn} All of these operations are, as I mentioned, within the same server. Is there a faster way to clone the tables I'm not seeing? They're all INNODB tables. Thanks!

  Read the article

• Getting rid of your server in a small business environment

  - by andygeers

  In a small business environment, is it still necessary to have a central server? Speaking for my own company (a small charity with about 12 employees) we use our server (Windows Server 2003) for the following: Email via Microsoft Exchange Central storage Acting as a print server User authentication / Active Directory There are significant costs associated with running a server like this: Electricity, first for the server itself then for the air conditioning required (this thing pumps out a lot of heat) Noise (of which there is a lot) IT support bills (both Windows Server and Exchange are pretty complicated, and there are many ways they can go wrong) I've found ways to replace many of these functions with cheaper (better?) alternatives: Google Apps / GMail is a clear win for us: we have so many spam related problems it's not even funny, and Outlook is dog slow on our aging computers You can buy networked storage devices with built in print servers, such as the Netgear ReadyNAS™ RND4210 that would allow us to store/share all of our documents, and allow us to access printers over the network The only thing that I can't figure out how to do away with is the authentication side of things - it seems to me that if we got rid of our server, you'd essentially have a bunch of independent PCs that had no shared pool of user accounts / no central administrator. Is that right? Does that matter? Am I missing any other good reasons to keep a central server? Does anybody know of any good, cost-effective ways of achieving the same end but without the expensive central server?

  Read the article

• Why would I need a firewall if my server is well configured?

  - by Aitch

  I admin a handful of cloud-based (VPS) servers for the company I work for. The servers are minimal ubuntu installs that run bits of LAMP stacks / inbound data collection (rsync). The data is large but not personal, financial or anything like that (ie not that interesting) Clearly on here people are forever asking about configuring firewalls and such like. I use a bunch of approaches to secure the servers, for example (but not restricted to) ssh on non standard ports; no password typing, only known ssh keys from known ips for login etc https, and restricted shells (rssh) generally only from known keys/ips servers are minimal, up to date and patched regularly use things like rkhunter, cfengine, lynis denyhosts etc for monitoring I have extensive experience of unix sys admin. I'm confident I know what I'm doing in my setups. I configure /etc files. I have never felt a compelling need to install stuff like firewalls: iptables etc. Put aside for a moment the issues of physical security of the VPS. Q? I can't decide whether I am being naive or the incremental protection a fw might offer is worth the effort of learning / installing and the additional complexity (packages, config files, possible support etc) on the servers. To date (touch wood) I've never had any problems with security but I am not complacent about it either.

  Read the article

• wireless router - configuring for low-latency, high traffic environment

  - by Mark C

  Hey all, I have a few questions about configuring a router to achieve low-latency, high speed throughput on a local area network that is not connected to the internet. I've read up on some stuff, but thought I would solicit some opinions here on what I've found and what I want to know.... Turn off SSID broadcast - it produces extraneous packets that all clients receive and reply (?) to. Not a huge deal, but it may help a bit. Mixed-mode off - I should attempt to have all devices using the same standard (e.g. 802.11n) and turn mixed-mode off. Any thoughts on security? Does having WEP or any of the WPA variants actually increase latency? Nothing super secure is going over this LAN so if turning security off made things better, that'd be cool. Any other thoughts or things to focus on to create the low latency environment I'm trying to go for would be great. Links to webpages and papers are also cool. I'm open to go through a bunch of stuff. Thanks in advance!

  Read the article

• How do you use VIM to edit tabular data (tables)? Specifically, BIND (named) DNS db files.

  - by Richard Bronosky

  I'm usually a purist when it comes to vimming. I don't like remapping keys, or learning to rely on a bunch of plugins. I like to feel just as powerful on foreign boxen as I do on my own dev box. I do, however, believe in syntax files. Even though the solution may not be a syntax file (bindzone.vim is what I use), I want it bad enough to do whatever. I regularly view or edit tab (or comma, but that would be a bonus) delimited data. I hate having to set my tabstop to some ridiculous number in order to have everything line up. Example: The BIND zone files are ~40+,6,2,5,15+. So, even though I could view them on a single screen, if I set ts=40, I cannot. I have been searching for a "dynamic tab size" solution for years, but no luck. I hate that my only good way of editing or even visualizing tabular data is to scp it to my work station and open it in Open Office. There has to be a better way.

  Read the article

• Simplest DNS solution for remote offices

  - by dunxd

  I look after a bunch of remote offices that connect via VPN - a Cisco ASA 5505 in each office acts as Firewall and VPN end point. Beyond that we keep things as simple as possible in the offices to minimise the support burden. We don't have any kind of server except in offices large enough to justify having someone dedicated to IT. Basically there is the ASA, some computers, a network printer and a switch. One of the problems I am seeing in a lot of offices is that DNS requests looking up hosts inside our network often fail - I'm assuming timeouts due to the offices internet connection (they are all in developing world countries) having some sub-optimal qualities (e.g. high latency caused by VSAT segments, or packet loss. The obvious solution to this is to have some sort of local DNS service that can serve local requests - so I think it would need to do zone transfers from our Microsoft Windows 2008 R2 DNS servers at HQ. However, simply installing Windows Servers in each office is both expensive, and creates a support burden. This got me thinking about pfsense/m0n0wall on embedded devices - those can act as a DNS server, and could be configured at HQ and sent out as just something that needs to be plugged into the network and can then be forgotten about by the staff locally. Maybe there are some alternatives to the ASA 5505 that include some DNS functionality. Has anyone here dealt with the problem, either using some kind of embedded device, or found some other solution? Any gotchas or reasons to avoid what I have suggested?

  Read the article

• Changing a set-cookie header using mod_rewrite/mod_proxy

  - by olrehm

  I have a bunch of cgi scripts, which are served using HTTPS. They can only be reached on the intranet, not from the outside. They set a cookie with the attribute 'Secure', so that it can only be send via HTTPS. There is also a reverse proxy to one of these scripts, unfortunately using plain HTTP. When a response comes in from my cgi-script with a secure cookie, it is not being passed on via HTTP (after all, that is what that attribute is for). I need however, an exception to this rule. Is it possible to use mod_rewrite/mod_proxy or something similar, to change the set-cookie header in the response coming from my cgi script and remove the Secure, such that the cookie can be passed back to the user using the unsafe HTTP connection? I understand that this defeats the purpose of the Secure in the first place, but I need this as a temporary work around. I have searched the web and found how to add a set-cookie header using mod_rewrite, and I have also found how to retrieve the value of a cookie coming from the client in a cookie header. What I have not yet found is how to extract the set-cookie header received in the response of a script I am proxying for. Is that possible? How would I do that? Ole

  Read the article

• Windows 7 & Photoshop CS5.1 - "Fonts missing" issue - I have the font!! (sort of)

  - by Tigue Von Bond

  I've noticed a really aggravating issue with Adobe Photoshop CS5.1 on at least two occasions. I downloaded a layered PSD file to work with, in the release notes it directed me to a download page for all of the font used, which was Futura Medium Condensed. I chcked and did not have any Futura fonts at all. So I downloaded and installed the font from the source provided by the provider of the PSD. I closed and reopened Photoshop and when I open the PSD file I get an error saying: Some text layers contain fonts that are missing. These layers will need to have the missing fonts replaced before they can be used for vector based output. I then go to edit the text layer and receive: The following fonts are missing for text layer "discount" Future CondensedExtraBold Font substitution will occur. Continue? If I click OK, it substitutes Myriad Pro for this layer. Didn't I download the right font? I go into the font dropdown and see I have a font with a slightly different name "Futura-CondensedExtraBold-Th Regular" I have also seen this issue with Helvetica. I have received a PSD file, same "some text layers contain fonts that are missing These..." error dialog when I open up the file - and when I go to edit a layer with text I get: The following fonts are missing for text layer "Home": Helvetica Font substitution will occur. Continue? I click continue - it substitutes Myriad Pro - and check my font list and sure enough I have a bunch of Helvetica fonts, none exactly named "Helvetica" Is this a common issue? Googling it yielded a few people with similar problems (I think all on Macs) but either no concrete help or no response. Is it that the two font names aren't EXACT matches? If that is the case is there any way of setting up Photoshop to more intelligently substitute or even set up some sort of mapping (if "Helvetica" then substitute "Helvetica Lt Std" ? Is there anything else, maybe something that I am not thinking of?

  Read the article

• Removing extended partition without deleting logical in it

  - by HisDudeness

  I'm running a Linux-based laptop, and in order to multi-boot several distros in it, I created an extended partition which contains a bunch of logical ones with GParted. Now, after quite a long time with this setup, I've changed my mind because of the consequent lack of storing space for my data partition. Now I want to keep one distro alone like it's normal, and eventually have some other operating systems stored in external supports to plug in and use if I want. Obviously, also this partition I want to keep (and to enlarge a little too) is just a logical inside the extended I want to keep. For what concerns the number I'm ok, meaning I currently have this big distro dedicated extended, the swap and the data partitions, so there's space for another primary before I delete the extended, but I don't know how to delete it without touching the logical in it, I don't want to reinstall the system losing all changes and settings, and I don't want to keep an extended partition for a logical alone. How can I do? Do I have to create a new primary, copy the logical content in it and then delete everything? Will the system boot and maintain exactly all the features it has now? Or is there a way to convert an extended into a primary once it contains just one logical? Or can I directly move a logical out of an extended turning it into a primary? Or, again, am I screwed?

  Read the article

• Are there any critical reasons why one could not use ubuntu as a server platform?

  - by Chiggsy

  We were using Lenny. ( Well Sid, really ). Had to do that for development. I upgraded my server with ubuntu 10.04, for a different project. Noticed the packages. Wearing my developer hat, it's a no brainer. Everything we need is there. I'm the admin as well. We might need more than one "box" (running on VPS for now). I do not want to build things that apt would put on for me. It's not hard, but I'm going to need that time. The debian "box" has a bunch of stuff on it, that'll have to be integrated properly, but I think we are going live in a distressingly short time. (Just found out.) I am aware of the reflexive answers to this question. What I would like to ask is are there critical bugs or critical instabilities that would make one shy away from the ubuntu/server path? I could not find any bugs that would stop me, but perhaps there is something?

  Read the article

• How to merge arbitrary snapshot into base vdi in Virtualbox

  - by jmathew

  I botched a transfer of a VM from one harddisk to the other. Now I'm left with the base vdi and a whole bunch of snapshots. My steps Copied old VM directory over to new HDD Deleted old VM and added new VM using using Machine-add and providing the old XML file Couldn't add base vdi file due to conflict so changed the UUID of base vdi with VBOXMANGE.EXE internalcommands sethduuid <path/to/vdi> Attempt to rollback to a snapshot, but it seems the VM is looking for the snapshots on the old HDD (which is formatted and gone) This is the error (networked is the name): Failed to restore the snapshot networked of the virtual machine lfs. Could not open the medium 'H:\vm\ft.vdi'. VD: error VERR_PATH_NOT_FOUND opening image file 'H:\vm\ft.vdi' (VERR_PATH_NOT_FOUND). Result Code: E_FAIL (0x80004005) Component: Medium Interface: IMedium {53f9cc0c-e0fd-40a5-a404-a7a5272082cd} The old HDD was drive H: the new one is drive N: How can I modify the snapshots/VM to look in N:\vm\ft.vdi for the base vdi? I've already set the default settings in VirtualBox in general (default vm/vm snapshot location). Or if not that how can I merge the old snap shot with the base vdi given that the only things that have changed is the base vdi's UUID?

  Read the article

• vmware esxi 5, cant create snapshots and consolidate fails, how to delete old or consolidate redo logs?

  - by Scott Szretter

  I have a VM that seems to be working ok, but when VMWare DR (or I) tries to create a snap shot, it fails, and when I view the summary page of the VM it has a warning at the top showing that the disks need to be consolidated. So I go to snapshot manager for the VM and choose consolidate (in snapshot manager, there are no snapshots actually listed by the way). If fails with this error: This virtual machine has 255 or more redo logs in a single branch of its snapshot tree. The maximum supported limit has been reached, creating new snapshots will not be allowed. To create new snapshots, please delete old snapshots or consolidate the redo logs. If I browse the data store (which has plenty of free space, 2 TB and this vm is under 40gb), in the vm folder, I do in fact see a bunch of files, numbered all the way to 0255: myvm-000255-ctk.vmdk myvm-000255-delta.vmdk myvm-000255.vmdk How can I clean all this up? Is there an SSH command line command or can I delete some of the files safely? Thanks!

  Read the article

• Syncing Google Desktop Scratch Pad

  - by Anders Frey

  I'm a long time user of Google Desktop Scratch Pad and I would like to be able to put the note in the cloud and make it accessible from all my electronic units. I'm working towards changing the filepath Scratch Pad uses to retrieve the .txt to lead to a DropBox folder. As the Desktop Scratch Pad is discontinued I've had no luck in retrieving the API, but what I've got so far is this: The scratch pad data is located at: C:\Users[user]\AppData\Local\Google\Google Desktop\a3d83d5fa2e9\scratchpad.txt The registry keys related to Google Desktop is located at: HKEY_CURRENT_USER\Software\Google\Google Desktop I'm guessing the Scratch Pad app itself is located at: HKEY_CURRENT_USER\Software\Google\Google Desktop\Components I have limited experience with the registry, so I'm not able to translate the binary and hexadecimals, but I'm hoping that the path location is in there somewhere. I've tried using a bunch of other noteapps (including the 'new' scratch pad in chrome) but haven't been able to find one that suits my needs as Desktop Scratch Pad. Hence the effort in this matter. I may be way off and I'm not sure if this is possible to do, but I'm looking forward to hearing your thoughts.

  Read the article

• Tables in the SQL Server "master" database, will they cause problems?

  - by pepoluan

  Folks, please be kind on me... I'm just an 'accidental' DBA due to our DBA resigned, so I'm totally a newbie in DBA... You see, I have this application, "ESET Remote Administration Server" (ERAS) that stores its logs and analysis on (originally) a local Access database. The decision was to migrate its database to a SQL Server 2008 R2 machine. ESET (the maker of the software) helpfully provided tools to perform such migration; unfortunately, being the DBA neophyte that I am, I didn't realize that I have to first create my own database (on the SQL Server side) and assign that database as the 'default' database for ERAS' ODBC connection. Now, the migration tool had successfully created a whole bunch of tables inside the "master" database. My questions: Should I leave things be as it is, or should I re-migrate the ERAS database to a different database? If you suggest me perform a re-migration, my plan is to (1) create a new instance, (2) create a new database within the new instance, (3) create a new ODBC System DSN on the ERAS server pointing to the new DB in step 2, (4) use ESET's migration tool to migrate from the current DSN to the new DSN. Do you think I missed a step there? Thanks beforehand for any guidance.

  Read the article

• How do I move a linked file on Unix?

  - by r3mbol

  I have a bunch of files in one directory and links to each one of those files in another directory. So ls -l looks something like this: lrwxrwxrwx 1 rembol rembol 89 Jan 25 10:00 copyright.txt -> /home/rembol/solr/target/deploy/data/core/copyright.txt lrwxrwxrwx 1 rembol rembol 92 Jan 25 10:00 jar-versions.xml -> /home/rembol/solr/target/deploy/data/core/jar-versions.xml lrwxrwxrwx 1 rembol rembol 85 Jan 25 10:00 lgpl.html -> /home/rembol/solr/target/deploy/data/core/lgpl.html lrwxrwxrwx 1 rembol rembol 79 Jan 25 10:00 lib -> /home/rembol/solr/target/deploy/data/core/lib lrwxrwxrwx 1 rembol rembol 87 Jan 25 10:00 readme.html -> /home/rembol/solr/target/deploy/data/core/readme.html drwxr-xr-x 3 rembol rembol 4096 Jan 25 10:00 server drwxr-xr-x 2 rembol rembol 4096 Jan 25 10:00 startup Now I want to move those linked files from /home/rembol/solr/target/deploy to /home/rembol/output/. If I do that my simply calling mv, links will break. I don't want to re-link each file separately, cause there are hundreds of them (they are generated automatically). Is there some clever way to move linked files, rather than writing a script that unlinks, moves and relinks recursively for each file in each subdirectory?

  Read the article

• Distributing processing for an application that wasn't designed with that in mind

  - by Tim

  We've got the application at work that just sits and does a whole bunch of iterative processing on some data files to perform some simulations. This is done by an "old" Win32 application that isn't multi-processor aware, so new(ish) computers and workstations are mostly sitting idle running this application. However, since it's installed by a typical Windows Install Shield installer, I can't seem to install and run multiple copies of the application. The work can be split up manually before processing, enabling the work to be distributed across multiple machines, but we still can't take advantage of multiple core CPUs. The results can be joined back together after processing to make a complete simulation. Is there a product out there that would let me "compartmentalize" an installation (or 4) so I can take advantage of a multi-core CPU? I had thought of using MS Softgrid, but I believe that still depends on a remote server to do the heavy lifting (though please correct me if I'm wrong). Furthermore, is there a way I can distribute the workload off the one machine? So an input could be split into 50 chunks, handed out to 50 machines, and worked on? All without really changing the initial application? In a perfect world, I'd get the application to take advantage of a DesktopGrid (BOINC), but like most "mission critical corporate applications", the need is there, but the money is not. Thank you in advance (and sorry if this isn't appropriate for serverfault).

  Read the article

• In a Shell scripts, check version of installed package, make a decision based on output

  - by DJDarkViper

  Looking to write a cross distro / cross version shell script that makes sure a forced version of PHP is installed Example: Ubuntu 12.04 has 5.3, Ubuntu 13.10 has 5.5, Debian 7 has 5.4 I need this script, when run on a distro that has an old version of PHP, to update the repo to point to a package for 5.4, and if the distro has too new of a version, can downgrade to 5.4 appropriately. Im still not entirely comprehensive of Shell/Terminals technical limit of what you can do with it, but ill be perfectly frank that im still not totally used to existing tools The best I can think at the moment is: php -v | grep "PHP 5" but that returns a bunch of potentially changeable granular characters (PHP 5.4.4-14+deb7u5 (cli) (built: Oct 3 2013 09:24:58) ). Im not sure what to pipe to after this to extract out the characters im interested in Im not sure if im being totally clear, im not sure how to ask this.. Basically, in an automated shell script for Linux distros, how do I extract the PHP version (and just the PHP version number preferably) and make a decision based on that output EDIT This line ended up doing pretty dang good php -v | grep "PHP 5" | sed 's/.*PHP \([^-]*\).*/\1/' | cut -c 1-3 Bit long in the tooth, but gives me "5.3", "5.4", and "5.5" which is exactly what I need to work with

  Read the article

• Is there a list of Windows services that can be turned off to save resources?

  - by scunliffe

  Every time I open up my task manager and look at the tasks running, it appears to me that there has got to be a bunch of junk running in there that I don't want or need and would be better off turning off (e.g. set the service to manual vs. automatic) In particular I'm running Windows XP, but I'd be interested in services for any version. e.g. Service: ThinkPad PM Service What is it: The ibmpmsvc.exe process is installed by default on IBM Notebook computers. It allows various functions of your IBM notebook to be controlled using the blue Fn keys. If you use the blue Fn keys on your Notebook, you should leave this process running. Otherwise, if it is causing problems for your system you should terminate the ibmpmsvc.exe process. (source) Thus for me, (having never used, or intending to use these buttons) - I want to turn it off. There's lots that just seem painfully unnecessary to me... I'm just not sure which ones I can "safely" stop/disable without issues... "Alerter", "ClipBook", "Messenger", "Telnet", "ATI Hotkey Poller", "Office Source Engine", etc. I'd appreciate any info on services that are truly unnecessary, or only useful to certain people/types of users.

  Read the article

• NTBackup (on WS2k3) fails to backup remote server (WS2k8R2) with " Error: is not a valid drive, or you do not have access."

  - by Mark A

  We run an NTBackup job on a Windows Server 2003 R2 SP2 with all updates (as of Q4-2011). It works well backing up two WS2k3 servers as well as the backup server itself. However, we have been unable to successfully back up our Windows Server 2008 R2 machine ("G5-01"). It often runs for about 2GB worth of backup and then dies out with one of the below error messages. It should be more like 20GB for the full server. We have tried using the admin share (C$), an explicitly shared drive share, UNC and mapped drives. The result is the same each time, the only thing that varies is the amount of stuff backed up before it chokes. We've also run NTBbackup from the UI interface, from the command line and as a scheduled task. We are backing up to 400/800GB tapes and they have plenty of space available on them (blank media). Error: \\G5-01\c is not a valid drive, or you do not have access. Error: \\G5-01\c$ is not a valid drive, or you do not have access. Error: Y: is not a valid drive, or you do not have access. Error: Could not access or create backup catalog files. Verify that you have full access to the working folder and there is disk space available. The job is run as Administrator and we have no problems logging onto the server and transferring files. The Event Log on the WS2k8 is not much help, as it has success audits for each login. All of the hardware involved (HP DL360 G3, HP LTO Ultrium 3, Adaptec 39320A) has the latest supported drivers. We've seemingly tried a bunch of different options but are wondering where to look next to resolve the backup issue. We've been super happy with our reliable schedule task for years but this one is stumping us!

  Read the article

• Converting PDF eBooks into a Kindle format

  - by Ender

  Over the past couple of years I've amassed quite a collection of guides, tutorials and ebooks in PDF format. A lot of these are quite useful for work, especially PDF documentation, and rather than have to be at a computer every time I want to read how to do something in Sitecore or to read through a software testing ebook I'd like to do it on my brand-spanking-new Kindle. However, even though there is now a native PDF reader on the Kindle due to the nature of PDF's they are practically unreadable. The text doesn't wrap due to how PDF's are sized and so far after a bunch of Google searches I've yet to find a viable solution to get my PDF's converted into a readable Kindle format. Sometimes these books have code or pictures/tables in them, but most of the time they're text-heavy and to be honest I'd be surprised if there wasn't a free tool to handle the converting of PDF to one of the (seemingly many) Kindle formats. So, can anyone help me out with this? EDIT: I've tried Calibre, and have checked their forums to play with some of the advanced settings, yet the solutions available seem to be extremely poor, especially if the book you're attempting to read contains equations, code, or anything outside of plain text. I've also tried Amazon's conversion service, which wasn't much help with such documents. The best way I have found so far is to build the entire thing over again in ePub or RTF format and convert to MOBI from there. This works for text-heavy books with tables, but anything technical still isn't covered. Can anyone help with this?

  Read the article

• Inkscape: Copying an object, retaining transparency

  - by dpk

  I'm looking for a way to copy objects from one window to another without losing the surrounding transparency. I have two Inkscape windows. The setup is pretty simple. In the first window I draw a filled circle and a filled rectangle in it, with the circle set on top of the rectangle to show that the area around the circle is transparent (that is, you can see the rectangle "under" the circle, see screenshot 1, left). In the second window I just drew a filled rectangle (screenshot 1, right). When I copy the circle from window 1 to window 2 the transparency around the circle is lost (screenshot 2). I've verified that the backgrounds of the documents are 0% alpha/white. This is a rather contrived example but is readily reproducible. The real graphics I am working with have a bunch of objects all in a single group, but I have the same results. I feel like I'm missing something. The circle no longer behaves like a circle at its destination. Instead, it acts kind of like a bitmap. I'm definitely not using the bitmap copy feature.

  Read the article

• IPTABLE & IP-routed netwok solution for HOST net and VM's subnet

  - by Daniel

  I've got ProxmoxVE2.1 ruled KVM node on Debian and bunch of VM's guests machine. That is how my networking looks like: # network interface settings auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 175.219.59.209 gateway 175.219.59.193 netmask 255.255.255.224 post-up echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp And I've got two working subnet solution auto vmbr0 iface vmbr0 inet static address 10.10.0.1 netmask 255.255.0.0 bridge_ports none bridge_stp off bridge_fd 0 post-up ip route add 10.10.0.1/24 dev vmbr0 This way I can reach internet, to resolve outside hosts, update and download everything I need but can't reach one guest VM out of any other VM's inside my network. The second solution allows me to communicate between VM's: auto vmbr1 iface vmbr1 inet static address 10.10.0.1 netmask 255.255.255.0 bridge_ports none bridge_stp off bridge_fd 0 post-up echo 1 > /proc/sys/net/ipv4/ip_forward post-up iptables -t nat -A POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE post-down iptables -t nat -D POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE I can even NAT internal addresses: -t nat -I PREROUTING -p tcp --dport 789 -j DNAT --to-destination 10.10.0.220:345 My inexperienced mind is ready to double VM's net adapters: one for the first solution and another - for second (with slightly different adresses) but I'm pretty sure that it's a dumb way to resolve the problem and everything can be resolved via iptables/ip route rules that I can't create. I've tried a dozen of "wizard manuals" and "howto's" to mix both solution but without success. Looking for an advice (and good reading links for networking begginers).

  Read the article

• How to backup a large FreeNAS?

  - by Ze'ev

  We have a 12TB FreeNAS box in the office, and are looking for a way to keep a backup of it offsite. We're considering (1) tape; (2) a bunch of bare drives (popped into a spare hotswap bay); (3) external drives. Any advice on which solution is best? (Online backup is not an option because our internet connection is too slow.) And, is there some software that will keep track of which files have been backed up and which haven't? So that when one backup unit fills up, we can continue the backup on the next? (We don't want to have to back up to a 12TB device.) This software could run, preferably, on the NAS itself; or from one of our Mac clients. Our goal is a situation where we attach some backup device; it automatically fills up with stuff from the server; the contents of this unit are catalogued somewhere something prompts us to replace with a fresh drive/tape; backup continues until full, including any files that have changed since being backed up.

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >