Search Results

Search found 18766 results on 751 pages for 'me again'.

Page 121/751 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

  • The theory of evolution applied to software

    - by Michel Grootjans
    I recently realized the many parallels you can draw between the theory of evolution and evolving software. Evolution is not the proverbial million monkeys typing on a million typewriters, where one of them comes up with the complete works of Shakespeare. We would have noticed by now, since the proverbial monkeys are now blogging on the Internet ;-) One of the main ideas of the theory of evolution is the balance between random mutations and natural selection. Random mutations happen all the time: millions of mutations over millions of years. Most of them are totally useless. Some of them are beneficial to the evolved species. Natural selection favors the beneficially mutated species. Less beneficial mutations die off. The mutated rabbit doesn't have to be faster than the fox. It just has to be faster than the other rabbits.   Theory of evolution Evolving software Random mutations happen all the time. Most of these mutations are so bad, the new species dies off, or cannot reproduce. Developers write new code all the time. New ideas come up during the act of writing software. The really bad ones don't get past the stage of idea. The bad ones don't get committed to source control. Natural selection favors the beneficial mutated species Good ideas and new code gets discussed in group during informal peer review. Less than good code gets refactored. Enhanced code makes it more readable, maintainable... A good set of traits makes the species superior to others. It becomes widespread A good design tends to make it easier to add new features, easier to understand the current implementations, easier to optimize for performance...thus superior. The best designs get carried over from project to project. They appear in blogs, articles and books about principles, patterns and practices.   Of course the act of writing software is deliberate. This can hardly be called random mutations. Though it sometimes might seem that code evolves through a will of its own ;-) Does this mean that evolving software (evolution) is better than a big design up front (creationism)? Not necessarily. It's a false idea to think that a project starts from scratch and everything evolves from there. Everyone carries his experience of what works and what doesn't. Up front design is necessary, but is best kept simple and minimal, just enough to get you started. Let the good experiences and ideas help to drive the process, whether they come from you or from others, from past experience or from the most junior developer on your team. Once again, balance is the keyword. Balance design up front with evolution on a daily basis. How do you know what balance is right? Through your own experience of what worked and what didn't (here's evolution again). Notes: The evolution of software can quickly degenerate without discipline. TDD is a discipline that leaves little to chance on that part. Write your test to describe the new behavior. Write just enough code to make it behave as specified. Refactor to evolve the code to a higher standard. The responsibility of good design rests continuously on each developers' shoulders. Promiscuous pair programming helps quickly spreading the design to the whole team.

    Read the article

  • Windows Phone 7 Silverlight / XNA development talk

    - by subodhnpushpak
    Hi, I presented on Windows Phone 7 app development using Silverlight. Here are few pics from the event Windows Phone 7 development VIEW SLIDE SHOW DOWNLOAD ALL     I demonstrated the Visual studio, emulator capabilities/ features. An demo on Wp7 app communication with an OData Service, along with a demo on XNA app. There was lot of curious questions; I am listing them here because these keep on popping up again and again: 1. What tools does it takes to develop Wp7 app? Are they free? A typical WP7 app can be developed either using Silverlight or XNA. For developers, Visual Studio 2010 is a good choice as it provides an integrated development environment with lots of useful project templates; which makes the task really easy. For designers, Blend may be used to develop the UI in XAML. Both the tools are FREE (express version) to download and very intuitive to use. 2. What about the learning curve? If you know C#, (or any other programming language), learning curve is really flat. XAML (used for UI) may be new for you, but trust me; its very intuitive. Also you can use Microsoft Blend to generate the UI (XAML) for you. 3. How can I develop /test app without using actual device? How can I be sure my app runs as expected on actual device? The WP7 SDK comes along with an excellent emulator; which you can use for development/ testing on a computer. Later you can just change a setting and deploy the application on WP7. You will require Zune software for deploying the application on phone along with Developers key from WP7 marketplace. You can obtain key from marketplace by filling a form. The whole process for registering  is easy; just follow the steps on the site. 4. Which one should I use? Silverlight or XNA? Use Silverlight for enterprise/ business / utility apps. Use XNA for Games app. While each platform is capable / strong and may be used in conjunction as well; The methodologies used for development in these platforms are very different. XNA works on typical Do..While loop where as Silverlight works on event based methodology. 5. Where are the learning resources? Are they free? There is lots of stuff on WP7. Most of them are free. There is a excellent free book by Charles Petzold to download and http://www.microsoft.com/windowsphone is full of demos /todos / vidoes. All the exciting stuff was captured live and you can view it here; in case you were not able to catch it live!! @ http://livestre.am/AUfx. My talk starts from 3:19:00 timeline in the video!! Is there an app you miss on WP7? Do let me know about it and I may work on it for free !!! Keep discovering. Keep is Simple. WP7. Subodh

    Read the article

  • SQL SERVER – Renaming Index – Index Naming Conventions

    - by pinaldave
    If you are regular reader of this blog, you must be aware of that there are two kinds of blog posts 1) I share what I learn recently 2) I share what I learn and request your participation. Today’s blog post is where I need your opinion to make this blog post a good reference for future. Background Story Recently I came across system where users have changed the name of the few of the table to match their new standard naming convention. The name of the table should be self explanatory and they should have explain their purpose without either opening it or reading documentations. Well, not every time this is possible but again this should be the goal of any database modeler. Well, I no way encourage the name of the tables to be too long like ‘ContainsDetailsofNewInvoices’. May be the name of the table should be ‘Invoices’ and table should contain a column with New/Processed bit filed to indicate if the invoice is processed or not (if necessary). Coming back to original story, the database had several tables of which the name were changed. Story Continues… To continue the story let me take simple example. There was a table with the name  ’ReceivedInvoices’, it was changed to new name as ‘TblInvoices’. As per their new naming standard they had to prefix every talbe with the words ‘Tbl’ and prefix every view with the letters ‘Vw’. Personally I do not see any need of the prefix but again, that issue is not here to discuss.  Now after changing the name of the table they faced very interesting situation. They had few indexes on the table which had name of the table. Let us take an example. Old Name of Table: ReceivedInvoice Old Name of Index: Index_ReceivedInvoice1 Here is the new names New Name of Table: TblInvoices New Name of Index: ??? Well, their dilemma was what should be the new naming convention of the Indexes. Here is a quick proposal of the Index naming convention. Do let me know your opinion. If Index is Primary Clustered Index: PK_TableName If Index is  Non-clustered Index: IX_TableName_ColumnName1_ColumnName2… If Index is Unique Non-clustered Index: UX_TableName_ColumnName1_ColumnName2… If Index is Columnstore Non-clustered Index: CL_TableName Here ColumnName is the column on which index is created. As there can be only one Primary Key Index and Columnstore Index per table, they do not require ColumnName in the name of the index. The purpose of this new naming convention is to increase readability. When any user come across this index, without opening their properties or definition, user can will know the details of the index. T-SQL script to Rename Indexes Here is quick T-SQL script to rename Indexes EXEC sp_rename N'SchemaName.TableName.IndexName', N'New_IndexName', N'INDEX'; GO Your Contribute Please Well, the organization has already defined above four guidelines, personally I follow very similar guidelines too. I have seen many variations like adding prefixes CL for Clustered Index and NCL for Non-clustered Index. I have often seen many not using UX prefix for Unique Index but rather use generic IX prefix only. Now do you think if they have missed anything in the coding standard. Is NCI and CI prefixed required to additionally describe the index names. I have once received suggestion to even add fill factor in the index name – which I do not recommend at all. What do you think should be ideal name of the index, so it explains all the most important properties? Additionally, you are welcome to vote if you believe changing the name of index is just waste of time and energy.  Note: The purpose of the blog post is to encourage all to participate with their ideas. I will write follow up blog posts in future compiling all the suggestions. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Index, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Heading out to Dallas GiveCamp 2011

    - by dotgeek
    The day has finally arrived for twelve local charities here in the Dallas area, when they’ll get some help from various local Developers with their website initiative needs at this years Dallas GiveCamp. I’m really looking forward to helping out at this year event and what I hope will be the start of many more GiveCamps to follow. Similar to Habitat for Humanity, where people gather to help build and improve homes for people in need, GiveCamp brings together programmers and equips them with the virtual tools they need to build and improve their existing websites. Tonight is when things will kickoff for this weekends events and teams will start working on their various projects. The building continues on through the night then and all the way through until Sunday afternoon. The end goal for the teams and charities is to have a completed and working website for each charity to begin using and turn over all the production code and digital assets to them. None of this would be possible with out the great sponsors we have returning once again and their donations of various products to help these charities out with their projects, like Telerik's CMS product Sitefinity 4.0, paired with a year of hosting from Verio to mention just a few of them. Just like the skilled builders who might help train volunteers in the use of a nail gun in building a house. Training is also available here on site for the Developers and these local Charities. Giving them all the skills in how to manage and use these products, from site development and then into actual production is a key to the success of this weekends event.     Tonight's training sessions will kick off with a real treat from Giovanni Gallucci, as he speaks about Social Media for NPOs and then later Gabe Sumner from Telerik will begin a training session on Sitefinity for Developers. These training sessions will continue through out the weekend with .Net Nuke and Mojo Portal sessions also planned as well. If you’re a developer and would like to help out in the future, then check in your area and with your local User Groups to find out if you already have a GiveCamp near you to help out. If you don’t have one available, then consider starting up a local GiveCamp and then you too can help Code it Forward. About GiveCamp GiveCamp is a weekend-long event where software developers, designers, and database administrators donate their time to create custom software for non-profit organizations. This custom software could be a new website for the nonprofit organization, a small data-collection application to keep track of members, or a application for the Red Cross that automatically emails a blood donor three months after they’ve donated blood to remind them that they are now eligible to donate again. The only limitation is that the project should be scoped to be able to be completed in a weekend. During GiveCamp, developers are welcome to go home in the evenings or camp out all weekend long. There are usually food and drink provided at the event. There are sometimes even game systems set up for when you and your need a little break! Overall, it’s a great opportunity for people to work together, developing new friendships, and doing something important for their community. At GiveCamp, there is an expectation of “What Happens at GiveCamp, Stays at GiveCamp”. Therefore, all source code must be turned over to the charities at the end of the weekend (developers cannot ask for payment) and the charities are responsible for maintaining the code moving forward (charities cannot expect the developers to maintain the codebase).

    Read the article

  • SQL SERVER – Asynchronous Update and Timestamp – Check if Row Values are Changed Since Last Retrieve

    - by pinaldave
    Here is the question received just this morning. “Pinal, Our application is much different than other application you might have come across. In simple words, I would like to call it Asynchronous Updated Application. We need your quick opinion about one of the situation which we are facing. From business side: We have bidding system (similar to eBay but not exactly) and where multiple parties bid on one item, during the last few minutes of bidding many parties try to bid at the same time with the same price. When they hit submit, we would like to check if the original data which they retrieved is changed or not. If the original data which they have retrieved is the same, we will accept their new proposed price. If original data are changed, they will have to resubmit the data with new price. From technical side: We have a row which we retrieve in our application. Multiple users are retrieving the same row. Some of the users will update the value of the row and submit. However, only the very first user should be allowed to update the row and remaining all the users will have to re-fetch the row and updated it once again. We do not want to lock any record as that will create other problems. Do you have any solution for this kind of situation?” Fantastic Question. I believe there is good chance that we can use timestamp datatype in this kind of application. Before we continue let us see following simple example. USE tempdb GO CREATE TABLE SampleTable (ID INT, Col1 VARCHAR(100), TimeStampCol TIMESTAMP) GO INSERT INTO SampleTable (ID, Col1) VALUES (1, 'FirstVal') GO SELECT ID, Col1, TimeStampCol FROM SampleTable st GO UPDATE SampleTable SET Col1 = 'NextValue' GO SELECT ID, Col1, TimeStampCol FROM SampleTable st GO DROP TABLE SampleTable GO Now let us see the resultset. Here is the simple explanation of the scenario. We created a table with simple column with TIMESTAMP datatype. When we inserted a very first value the timestamp was generated. When we updated any value in that row, the timestamp was updated with the new value. Every single time when we update any value in the row, it will generate new timestamp value. Now let us apply this in an original question’s scenario. In that case multiple users are retrieving the same row. Everybody will have the same now same TimeStamp with them. Before any user update any value they should once again retrieve the timestamp from the table and compare with the timestamp they have with them. If both of the timestamp have the same value – the original row has not been updated and we can safely update the row with the new value. After initial update, now the row will contain a new timestamp. Any subsequent update to the same row should also go to the same process of checking the value of the timestamp they have in their memory. In this case, the timestamp from memory will be different from the timestamp in the row. This indicates that row in the table has changed and new updates should not be allowed. I believe timestamp can be very very useful in this kind of scenario. Is there any better alternative? Please leave a comment with the suggestion and I will post on the blog with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Eclipse no longer useful

    - by dgood1
    When I got my Eclipse from the Ubuntu Software Center, it was good and worked fine. I could work on Java projects fine. This week I was required to add ADT and tried the ADT-bundle, assuming it had everthing I needed, seeing that the SDK had more steps. So now, I can create Android apps using the ADT-bundle. I tried to work on my java projects again and I now discovered: I can't run my java projects: "The selection cannot be launched. And there are no recent launches." error. I also believe Eclipse doesn't know it's a java program because it all in black and white. Not the usual green/blue/red/black things when making comments, variables and Strings. I can't make new projects of ANYTHING unless I use the adt-bundle. New project only offers CVS (whatever that is) My perspectives seem limited. I remembered more choices and now I'm limited to [Java], Resource, CVS Repository, debug, Team Sync. I was told to be able to use perspectives to swap between Android and Java developing. Even after the ADT installation using "Install new Software",nothing. I can't uninstall/purge/remove Eclipse via the terminal. I tried removing it then reinstalling it via the Ubuntu Software Cetner. No results other than it's temporary removal. (Possibly unrelated) A large number of repositories are not found when updating Eclipse. (See Step 8 in Summary of what I did...) Although, on checking the versions and installation history, I confirmed Android and Java are installed. It probably just doesn't know it's there. Eclipse Indigo: Version: 3.7.2 Build id: I20110613-1736 Summary of what I did before and during the problem: Downloaded adt-bundle. Attempted instructions from teacher. (Install new Software) (Failed but other than an annoying "can't find repository" during each update, no damage to report) (Fixed) Ran "eclipse" executable from the adt-bundle. Updated Eclipse. (After restart, I noticed the problem) NOTE: other than window arrangement, I had no customizations. Played around with the Windowspreferences and Projectpropertied. Restored to default settings after no results. Tried "apt-get purge eclipse". Couldn't find Eclipse so, nothing happened. Used Software center. No results. Tried swapping workspaces. I tried different folder, deeper folder, renaming. All return the same problem. Deleted adt-bundle (browsed folders then delete). Got Adt-sdk only. Installed. Can't find any changes other than some disk space usage. Of course, I can't make Android apps until I unzip the bundle again. WindowsPreferencesInstall/UpdateAvailable Software Sites, Checked as many repositories as possible, then updated. Still nothing. I'm about to get a second try on uninstalling it, because I think my last action will just be taking up space. But I'll wait for tomorrow, in case the answer will help. Any thoughts?

    Read the article

  • Math with Timestamp

    - by Knut Vatsendvik
    table.sql { border-width: 1px; border-spacing: 2px; border-style: dashed; border-color: #0023ff; border-collapse: separate; background-color: white; } table.sql th { border-width: 1px; padding: 1px; border-style: none; border-color: gray; background-color: white; -moz-border-radius: 0px 0px 0px 0px; } table.sql td { border-width: 1px; padding: 3px; border-style: none; border-color: gray; background-color: white; -moz-border-radius: 0px 0px 0px 0px; } .sql-keyword { color: #0000cd; background-color: inherit; } .sql-result { color: #458b74; background-color: inherit; } Got this little SQL quiz from a colleague.  How to add or subtract exactly 1 second from a Timestamp?  Sounded simple enough at first blink, but was a bit trickier than expected. If the data type had been a Date, we knew that we could add or subtract days, minutes or seconds using + or – sysdate + 1 to add one day sysdate - (1 / 24) to subtract one hour sysdate + (1 / 86400) to add one second Would the same arithmetic work with Timestamp as with Date? Let’s test it out with the following query SELECT   systimestamp , systimestamp + (1 / 86400) FROM dual; ---------- 03.05.2010 22.11.50,240887 +02:00 03.05.2010 The first result line shows us the system time down to fractions of seconds. The second result line shows the result as Date (as used for date calculation) meaning now that the granularity is reduced down to a second.   By using the PL/SQL dump() function, we can confirm this with the following query SELECT   dump(systimestamp) , dump(systimestamp + (1 / 86400)) FROM dual; ---------- Typ=188 Len=20: 218,7,5,4,8,53,9,0,200,46,89,20,2,0,5,0,0,0,0,0 Typ=13 Len=8: 218,7,5,4,10,53,10,0 Where typ=13 is a runtime representation for Date. So how can we increase the precision to include fractions of second? After investigating it a bit, we found out that the interval data type INTERVAL DAY TO SECOND could be used with the result of addition or subtraction being a Timestamp. Let’s try again our first query again, now using the interval data type. SELECT systimestamp,    systimestamp + INTERVAL '0 00:00:01.0' DAY TO SECOND(1) FROM dual; ---------- 03.05.2010 22.58.32,723659000 +02:00 03.05.2010 22.58.33,723659000 +02:00 Yes, it worked! To finish the story, here is one example showing how to specify an interval of 2 days, 6 hours, 30 minutes, 4 seconds and 111 thousands of a second. INTERVAL ‘2 6:30:4.111’ DAY TO SECOND(3)

    Read the article

  • Making the most of next weeks SharePoint 2010 developer training

    - by Eric Nelson
    [you can still register if you are free on the afternoons of 9th to 11th – UK time] We have 50+ registrations with more coming in – which is fantastic. Please read on to make the most of the training. Background We have structured the training to make sure that you can still learn lots during the three days even if you do not have SharePoint 2010 installed. Additionally the course is based around a subset of the channel 9 training to allow you to easily dig deeper or look again at specific areas. Which means if you have zero time between now and next Wednesday then you are still good to go. But if you can do some pre-work you will likely get even more out of the three days. Step 1: Check out the topics and resources available on-demand The course is based around a subset of the channel 9 training to allow you to easily dig deeper or look again at specific areas. Take a lap around the SharePoint 2010 Training Course on Channel 9 Download the SharePoint Developer Training Kit Step 2: Use a pre-configured Virtual Machine which you can download (best start today – it is large!) Consider using the VM we created If you don't have access to SharePoint 2010. You will need a 64bit host OS and bare minimum of 4GB of RAM. 8GB recommended. Virtual PC can not be used with this VM – Virtual PC only supports 32bit guests. The 2010-7a Information Worker VM gives you everything you need to develop for SharePoint 2010. Watch the Video on how to use this VM Download the VM Remember you only need to download the “parts” for the 2010-7a VM. There are 3 subtly different ways of using this VM: Easiest is to follow the advice of the video and get yourself a host OS of Windows Server 2008 R2 with Hyper-V and simply use the VM Alternatively you can take the VHD and create a “Boot to VHD” if you have Windows 7 Ultimate or Enterprise Edition. This works really well – especially if you are already familiar with “Boot to VHD” (This post I did will help you get started) Or you can take the VHD and use an alternative VM tool such as VirtualBox if you have a different host OS. NB: This tends to involve some work to get everything running fine. Check out parts 1 to 3 from Rolly and if you go with Virtual Box use an IDE controller not SATA. SATA will blue screen. Note in the screenshot below I also converted the vhd to a vmdk. I used the FREE Starwind Converter to do this whilst I was fighting blue screens – not sure its necessary as VirtualBox does now work with VHDs. or Step 3 – Install SharePoint 2010 on a 64bit Windows 7 or Vista Host I haven’t tried this but it is now supported. Check out MSDN. Final notes: I am in the process of securing a number of hosted VMs for ISVs directly managed by my team. Your Architect Evangelist will have details once I have them! Else we can sort out on the Wed. Regrettably I am unable to give folks 1:1 support on any issues around Boot to VHD, 3rd party VM products etc. Related Links: Check you are fully plugged into the work of my team – have you done these simple steps including joining our new LinkedIn group?

    Read the article

  • JavaOne Latin America 2012 Trip Report

    - by reza_rahman
    JavaOne Latin America 2012 was held at the Transamerica Expo Center in Sao Paulo, Brazil on December 4-6. The conference was a resounding success with a great vibe, excellent technical content and numerous world class speakers. Some notable local and international speakers included Bruno Souza, Yara Senger, Mattias Karlsson, Vinicius Senger, Heather Vancura, Tori Wieldt, Arun Gupta, Jim Weaver, Stephen Chin, Simon Ritter and Henrik Stahl. Topics covered included the JCP/JUGs, Java SE 7, HTML 5/WebSocket, CDI, Java EE 6, Java EE 7, JSF 2.2, JMS 2, JAX-RS 2, Arquillian and JavaFX. Bruno Borges and I manned the GlassFish booth at the Java Pavilion on Tuesday and Webnesday. The booth traffic was decent and not too hectic. We met a number of GlassFish adopters including perhaps one of the largest GlassFish deployments in Brazil as well as some folks migrating to Java EE from Spring. We invited them to share their stories with us. We also talked with some key members of the local Java community. Tuesday evening we had the GlassFish party at the Tribeca Pub. The party was definitely a hit and we could have used a larger venue (this was the first time we had the GlassFish party in Brazil). Along with GlassFish enthusiasts, a number of Java community leaders were there. We met some of the same folks again at the JUG leader's party on Wednesday evening. On Thursday Arun Gupta, Bruno Borges and I ran a hands-on-lab on JAX-RS, WebSocket and Server-Sent Events (SSE) titled "Developing JAX-RS Web Applications Utilizing Server-Sent Events and WebSocket". This is the same Java EE 7 lab run at JavaOne San Francisco. The lab provides developers a first hand glipse of how an HTML 5 powered Java EE application might look like. We had an overflow crowd for the lab (at one point we had about twenty people standing) and the lab went very well. The slides for the lab are here: Developing JAX-RS Web Applications Utilizing Server-Sent Events and WebSocket from Reza Rahman The actual contents for the lab is available here. Give me a shout if you need help getting it up and running. I gave two solo talks following the lab. The first was on JMS 2 titled "What’s New in Java Message Service 2". This was essentially the same talk given by JMS 2 specification lead Nigel Deakin at JavaOne San Francisco. I talked about the JMS 2 simplified API, JMSContext injection, delivery delays, asynchronous send, JMS resource definition in Java EE 7, standardized configuration for JMS MDBs in EJB 3.2, mandatory JCA pluggability and the like. The session went very well, there was good Q & A and someone even told me this was the best session of the conference! The slides for the talk are here: What’s New in Java Message Service 2 from Reza Rahman My last talk for the conference was on JAX-RS 2 in the keynote hall. Titled "JAX-RS 2: New and Noteworthy in the RESTful Web Services API" this was basically the same talk given by the specification leads Santiago Pericas-Geertsen and Marek Potociar at JavaOne San Francisco. I talked about the JAX-RS 2 client API, asyncronous processing, filters/interceptors, hypermedia support, server-side content negotiation and the like. The talk went very well and I got a few very kind complements afterwards. The slides for the talk are here: JAX-RS 2: New and Noteworthy in the RESTful Web Services API from Reza Rahman On a more personal note, Sao Paulo has always had a special place in my heart as the incubating city for Sepultura and Soulfy -- two of my most favorite heavy metal musical groups of all time! Consequently, the city has a perpertually alive and kicking metal scene pretty much any given day of the week. This time I got to check out a solid performance by local metal gig Republica at the legendary Manifesto Bar. I also wanted to see a Dio Tribute at the Blackmore but ran out of time and energy... Overall I enjoyed the conference/Sao Paulo and look forward to going to Brazil again next year!

    Read the article

  • How do I revert updates/tweaks to get to a usable GUI?

    - by Frankenmartin
    I just installed 12.04 the other day and then ran into trouble upon restarting after installing updates. What I did before the problem occurred: I did not make many changes before this problem occurred. Changes I did make included: Downloading and installing Adobe Flash Player (off topic but: I am under the impression that Java, "C&C" and Shockwave can not be run in Ubuntu. Could anybody verify this?) I also installed gnome-tweak-tool and used it to install several themes. These themes worked well until restarting after the update. Is it possible that one of these themes caused the problem (in combination with the update or because of the restart)? Installed 215 updates from update manager and restarted my system. Current Situation: Unity 3D is unusable since restarting after running updates. When I log in after entering my password the following things happen: the overhead panel disappears and the screen goes black for a minute my wallpaper flashes for a couple seconds but then the screen goes black again after another minute the wallpaper reappears but nothing else does and I am not able to open anything or even right click. after 5 minutes I can finally get a right click menu eventually a box comes up warning about a Compiz failure and asking to let it quit--which I did. Using the right click functionality I was able to create a new folder on the desktop and use this to open a file browser. In doing so I noticed that the downloads I had made were missing (music, image files, etc., even after unpacking several .zip and .rar files) even though I believe that everything should still be there. Any new windows that I create are un-closable/minimizable/movable/etc, because the window bars are missing. I have tried rebooting several times but the results are the same. I was able to browse some off the System Settings windows by clicking on the wallpaper link in the right click menu. In doing so I navigated into the update manager and noticed that updates were selected to be accepted from some "unsupported sources". I do not recall setting these options myself and wonder why these--potentially dangerous--options would be selected by default. Unity 2D is usable but not free of bugs--I stumbled across the ability to log into a Unity 2D session while trying to log into Unity 3D. So far I have only noticed one bug in Unity 2D: the close, minimize and maximize buttons are invisible--however they are still usable despite being invisible. What I need: I'm very new to Linux and Ubuntu and still am in the feeling out stages. As such I will have some trouble answering clarifying questions. I haven't used the terminal yet and would probably not be comfortable using it without very clear instructions. What I do need is to know how I can roll back/remove all those updates so I can use my computer regularly again. I do believe that I could follow step-by-step instructions as long as they are clear and concise if someone knows what my problem is.

    Read the article

  • DataContractSerializer: type is not serializable because it is not public?

    - by Michael B. McLaughlin
    I recently ran into an odd and annoying error when working with the DataContractSerializer class for a WP7 project. I thought I’d share it to save others who might encounter it the same annoyance I had. So I had an instance of  ObservableCollection<T> that I was trying to serialize (with T being a class I wrote for the project) and whenever it would hit the code to save it, it would give me: The data contract type 'ProjectName.MyMagicItemsClass' is not serializable because it is not public. Making the type public will fix this error. Alternatively, you can make it internal, and use the InternalsVisibleToAttribute attribute on your assembly in order to enable serialization of internal members - see documentation for more details. Be aware that doing so has certain security implications. This, of course, was malarkey. I was trying to write an instance of MyAwesomeClass that looked like this: [DataContract] public class MyAwesomeClass { [DataMember] public ObservableCollection<MyMagicItemsClass> GreatItems { get; set; }   [DataMember] public ObservableCollection<MyMagicItemsClass> SuperbItems { get; set; }     public MyAwesomeClass { GreatItems = new ObservableCollection<MyMagicItemsClass>(); SuperbItems = new ObservableCollection<MyMagicItemsClass>(); } }   That’s all well and fine. And MyMagicItemsClass was also public with a parameterless public constructor. It too had DataContractAttribute applied to it and it had DataMemberAttribute applied to all the properties and fields I wanted to serialize. Everything should be cool, but it’s not because I keep getting that “not public” exception. I could tell you about all the things I tried (generating a List<T> on the fly to make sure it wasn’t ObservableCollection<T>, trying to serialize the the Collections directly, moving it all to a separate library project, etc.), but I want to keep this short. In the end, I remembered my the “Debug->Exceptions…” VS menu option that brings up the list of exception-related circumstances under which the Visual Studio debugger will break. I checked the “Thrown” checkbox for “Common Language Runtime Exceptions”, started the project under the debugger, and voilà: the true problem revealed itself. Some of my properties had fairly elaborate setters whose logic I wanted to ignore. So for some of them, I applied an IgnoreDataMember attribute to them and applied the DataMember attribute to the underlying fields instead. All of which, in line with good programming practices, were private. Well, it just so happens that WP7 apps run in a “partial trust” environment and outside of “full trust”-land, DataContractSerializer refuses to serialize or deserialize non-public members. Of course that exception was swallowed up internally by .NET so all I ever saw was that bizarre message about things that I knew for certain were public being “not public”. I changed all the private fields I was serializing to public and everything worked just fine. In hindsight it all makes perfect sense. The serializer uses reflection to build up its graph of the object in order to write it out. In partial trust, you don’t want people using reflection to get at non-public members of an object since there are potential security problems with allowing that (you could break out of the sandbox pretty quickly by reflecting and calling the appropriate methods and cause some havoc by reflecting and setting the appropriate fields in certain circumstances. The fact that you cannot reflect your own assembly seems a bit heavy-handed, but then again I’m not a compiler writer or a framework designer and I have no idea what sorts of difficulties would go into allowing that from a compilation standpoint or what sorts of security problems allowing that could present (if any). So, lesson learned. If you get an incomprehensible exception message, turn on break on all thrown exceptions and try running it again (it might take a couple of tries, depending) and see what pops out. Chances are you’ll find the buried exception that actually explains what was going on. And if you’re getting a weird exception when trying to use DataContractSerializer complaining about public types not being public, chances are you’re trying to serialize a private or protected field/property.

    Read the article

  • SQLAuthority News – Speaking at Southeast Asia SharePoint Conference 2013 – Singapore

    - by pinaldave
    Two years ago I spoke at Southeast Asia SharePoint Conference 2011, Singapore and I had a fantastic time to present to the Singapore audience. The session was very well received and lots of interest was generated. The event is back again this year and with much bigger scale. I will be presenting on SQL Server and Sharepoint subject at the conference. Session Details: Title: Performance in 60 Seconds – Database Tricks Every SharePoint Developer & Admin MUST Know Abstract: SharePoint Developers and System Administrators often come across situations where they face a slow server response, even though their hardware specifications are above  par. This session is for all the SharePoint Developers who want their server to perform at blazing fast speed but want to invest very little time to make it happen. We will go over various database tricks which require absolutely no time to master and require practically no SQL coding at all. After attending this session, Developers will only need 60 seconds to improve performance of their database server in their SharePoint implementation. Date and Time: January 18, 20013 - 3:15 PM-4:15 PM Location: Max Atria is located at Singapore Expo, 1 Expo Drive, Singapore Tel 65 6403 2160 This session will cover lots of interesting tips and tricks about SQL Server and SharePoint co-exists together. I promise that every attendee will walk out with a trick which they can walk out of session and directly apply to their production server to improve its performance. The event is going to be again fantastic event – if you are in Singapore – you must not miss this event. If you are planning vacation – this is the right time to take days off and travel to Singapore for vacation. The event features over 30 sessions to choose from, focus on three areas of business gain: Exploring Information, Improving Productivity and Making it Work. This event has an excellent line up of international speakers (speakers traveling from the USA, Australia, New Zealand, Sri Lanka and India). Register early to reserve a spot at your choice of more than 30 classes taught by Microsoft Certified Masters, MVPs, and other top SharePoint experts! Here I have attempted to answer a few of the questions which every SharePoint professional half: Which sessions suit my skill level? Click here. What sessions are right for me? Click here. Which sessions are of my interests? Click here. Which sessions are on when? Click here. If you register by next Friday, 14, December – you can save $126 on the regular price of the conference. Prizes, Giveaways and … I love conference goodies – I collect them as a souvenir . This event is known for its generous prizes. The first 100 people to register on the day will get a SPECIAL gift at the event. Additionally there are exhibitor booth give away too. Here is the page listing all the prizes and giveaways. Do leave a comment or send me email if you are going to the event, we can sit together and have a coffee. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • Algorithm for tracking progress of controller method running in background

    - by SilentAssassin
    I am using Codeigniter framework for PHP on Windows platform. My problem is I am trying to track progress of a controller method running in background. The controller extracts data from the database(MySQL) then does some processing and then stores the results again in the database. The complete aforesaid process can be considered as a single task. A new task can be assigned while another task is running. The newly assigned task will be added in a queue. So if I can track progress of the controller, I can show status for each of these tasks. Like I can show "Pending" status for tasks in the queue, "In Progress" for tasks running and "Done" for tasks that are completed. Main Issue: Now first thing I need to find is an algorithm to track the progress of how much amount of execution the controller method has completed and that means tracking how much amount of method has completed execution. For instance, this PHP script tracks progress of array being counted. Here the current state and state after total execution are known so it is possible to track its progress. But I am not able to devise anything analogous to it in my case. Maybe what I am trying to achieve is programmtically not possible. If its not possible then suggest me a workaround or a completely new approach. If some details are pending you can mention them. Sorry for my ignorance this is my first post here. I welcome you to point out my mistakes. EDIT: Database outline: The URL(s) and keyword(s) are first entered by user which are stored in a database table called link_master and keyword_master respectively. Then keywords are extracted from all the links present in this table and compared with keywords entered by user and their frequency is calculated which is the final result. And the results are stored in another table called link_result. Now sub-links are extracted from the domain links and stored in a table called sub_link_master. Now again the keywords are extracted from these sub-links and the corresponding results are stored in a table called sub_link_result. The number of records cannot be defined beforehand as the number of links on any web page can be different. Only the cardinality of *link_result* table can be known which will be equal to multiplication of number of keyword(s) and URL(s) . I insert multiple records at a time using this resource. Controller outline: The controller extracts keywords from a web page and also extracts keywords from all the links present on that page. There is a method called crawlLink. I used Rolling Curl to extract keywords and web page content. It has callback function which I used for extracting keywords alongwith generating results and extracting valid sub-links. There is a insertResult method which stores results for links and sub-links in the respective tables. Yes, the processing depends on the number of records. The more the number of records, the more time it takes to execute: Consider this scenario: Number of Domain Links = 1 Number of Keywords = 3 Number of Domain Links Result generated = 3 (3 x 1 as described in the question) Number of Sub Links generated = 41 Number of Sub Links Result = 117 (41 x 3 = 123 but some links are not valid or searchable) Approximate time taken for above process to complete = 55 seconds. The above result is for a single link. I want to track the progress of the above results getting stored in database. When all results are stored, the task is complete. If results are getting stored, the task is In Progress. I am not clear how can I track this progress.

    Read the article

  • Why Is Hibernation Still Used?

    - by Jason Fitzpatrick
    With the increased prevalence of fast solid-state hard drives, why do we still have system hibernation? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Moses wants to know why he should use hibernate on a desktop machine: I’ve never quite understood the original purpose of the Hibernation power state in Windows. I understand how it works, what processes take place, and what happens when you boot back up from Hibernate, but I’ve never truly understood why it’s used. With today’s technology, most notably with SSDs, RAM and CPUs becoming faster and faster, a cold boot on a clean/efficient Windows installation can be pretty fast (for some people, mere seconds from pushing the power button). Standby is even faster, sometimes instantaneous. Even SATA drives from 5-6 years ago can accomplish these fast boot times. Hibernation seems pointless to me [on desktop computers] when modern technology is considered, but perhaps there are applications that I’m not considering. What was the original purpose behind hibernation, and why do people still use it? Quite a few people use hibernate, so what is Moses missing in the big picture? The Answer SuperUser contributor Vignesh4304 writes: Normally hibernate mode saves your computer’s memory, this includes for example open documents and running applications, to your hard disk and shuts down the computer, it uses zero power. Once the computer is powered back on, it will resume everything where you left off. You can use this mode if you won’t be using the laptop/desktop for an extended period of time, and you don’t want to close your documents. Simple Usage And Purpose: Save electric power and resuming of documents. In simple terms this comment serves nice e.g (i.e. you will sleep but your memories are still present). Why it’s used: Let me describe one sample scenario. Imagine your battery is low on power in your laptop, and you are working on important projects on your machine. You can switch to hibernate mode – it will result your documents being saved, and when you power on, the actual state of application gets restored. Its main usage is like an emergency shutdown with an auto-resume of your documents. MagicAndre1981 highlights the reason we use hibernate everyday: Because it saves the status of all running programs. I leave all my programs open and can resume working the next day very easily. Doing a real boot would require to start all programs again, load all the same files into those programs, get to the same place that I was at before, and put all my windows in exactly the same place. Hibernating saves a lot of work pulling these things back up again. It’s not unusual to find computers around the office here that have been hibernated day in and day out for months without an actual full system shutdown and restart. It’s enormously convenient to freeze your work space at the exact moment you stopped working and to turn right around and resume there the next morning. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

    Read the article

  • New Analytic settings for the new code

    - by Steve Tunstall
    If you have upgraded to the new 2011.1.3.0 code, you may find some very useful settings for the Analytics. If you didn't already know, the analytic datasets have the potential to fill up your OS hard drives. The more datasets you use and create, that faster this can happen. Since they take a measurement every second, forever, some of these metrics can get in the multiple GB size in a matter of weeks. The traditional 'fix' was that you had to go into Analytics -> Datasets about once a month and clean up the largest datasets. You did this by deleting them. Ouch. Now you lost all of that historical data that you might have wanted to check out many months from now. Or, you had to export each metric individually to a CSV file first. Not very easy or fun. You could also suspend a dataset, and have it not collect data at all. Well, that fixed the problem, didn't it? of course you now had no data to go look at. Hmmmm.... All of this is no longer a concern. Check out the new Settings tab under Analytics... Now, I can tell the ZFSSA to keep every second of data for, say, 2 weeks, and then average those 60 seconds of each minute into a single 'minute' value. I can go even further and ask it to average those 60 minutes of data into a single 'hour' value.  This allows me to effectively shrink my older datasets by a factor of 1/3600 !!! Very cool. I can now allow my datasets to go forever, and really never have to worry about them filling up my OS drives. That's great going forward, but what about those huge datasets you already have? No problem. Another new feature in 2011.1.3.0 is the ability to shrink the older datasets in the same way. Check this out. I have here a dataset called "Disk: I/O opps per second" that is about 6.32M on disk (You need not worry so much about the "In Core" value, as that is in RAM, and it fluctuates all the time. Once you stop viewing a particular metric, you will see that shrink over time, just relax).  When one clicks on the trash can icon to the right of the dataset, it used to delete the whole thing, and you would have to re-create it from scratch to get the data collecting again. Now, however, it gives you this prompt: As you can see, this allows you to once again shrink the dataset by averaging the second data into minutes or hours. Here is my new dataset size after I do this. So it shrank from 6.32MB down to 2.87MB, but i can still see my metrics going back to the time I began the dataset. Now, you do understand that once you do this, as you look back in time to the minute or hour data metrics, that you are going to see much larger time values, right? You will need to decide what size of granularity you can live with, and for how long. Check this out. Here is my Disk: Percent utilized from 5-21-2012 2:42 pm to 4:22 pm: After I went through the delete process to change everything older than 1 week to "Minutes", the same date and time looks like this: Just understand what this will do and how you want to use it. Right now, I'm thinking of keeping the last 6 weeks of data as "seconds", and then the last 3 months as "Minutes", and then "Hours" forever after that. I'll check back in six months and see how the sizes look. Steve 

    Read the article

  • Dell 3721 Wifi problem Ubuntu 13.04

    - by Sebastian
    I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

    Read the article

  • 11.10 desktop alerts (volume change and terminal bell) stopped working but all other audio still works

    - by FlabbergastedPickle
    All, My sound works just fine in 11.10 64-bit install on HP dm1-4050 Sandy Bridge notebook (e.g. audio works in Banshee, flash, games, browser, Thunderbird email notification, etc.), but the core desktop notifications (e.g. pressing a tab in a terminal where there is more than one option should trigger a terminal bell, or changing volume using volume keys should be accompanied with the supporting "quack" that the volume app makes) do not work. I've intentionally disabled login sound as explained here on ask ubuntu but even enabling it back makes no difference. These notifications did work before just fine and I am not sure when did the actually stop working but it must've been fairly recently. Only things I did were trying to install some ppa edge xorg drivers for my intel card (a separate issue) but also reverted them all with ppa-purge once I discovered they did not improve anything. Other thing I did was check volume settings with alsamixer and did alsactl store for the soundcard after I did some experimenting with volume settings for PCM (on my laptop PCM at 100% crackles so I had to lower it and make pulseaudio ignore its setting as per ask ubuntu's page). That said, neither of these should have any bearing on the said notifications since the volume is up and they clearly work everywhere else but the core desktop events. The system ready drum sound when Ubuntu boots and user reaches the login screen also does not work. The guest login behaves exactly same as mine. Audio works (including the login sound since I've not disabled it for the guest account), but no quacks when changing the volume or terminal bell sounds... I've tried copying ubuntu sounds to /usr/share/sounds/ as suggested on ask ubuntu and that did not work. I also tried using dconf-editor to check sound theme settings and tried both freedesktop (which is what it was set to) and ubuntu, as suggested on ask ubuntu. This did not work either. I tried purging the ~/.pulse folder and the /tmp/*pulse* entries, rebooting and restarting pulseaudio with -D flag. While audio came back on and behaved just fine in all aspects (e.g. one can adjust volume levels, play music, games, in-browser sound stuff, and other app alerts) except for the system ready drum sound (at the login screen), and any system event (terminal bell and volume change quack sound). It is interesting that the quack sound works inside system settings-sound when adjusting levels there, but it does not when volume is changed via top bar's volume settings... I do recall that at one point yesterday when I was restarting pulseaudio the quacks that accompany volume change did start working but I have no idea what caused that. This was also when I first realized those alerts were not working. After rebooting it was again gone. I did compile my own 3.0.14-rt31 kernel a little while ago as instructed on one of the wiki's for the 11.10 rt kernel. Everything works as before except for the said sound alerts. I am not sure if this began happening since I started using the rt kernel though and yesterday's momentary ability to hear those quacks while changing the volume make me believe that the kernel is not one responsible for this problem. One more thing I can think of is that I used alsoft-conf tool to configure buffering on the OpenAL (due to TA Spring's choppy audio) and changed in there default audio device to ALSA. I also tried reverting it to Pulseaudio as the only allowed output but the bottom part of the Backend tab always reverts to ALSA even when I select Pulseaudio. The pulseaudio does remain as the only active choice on top. This, however, once again does not make any sense in terms of preventing desktop audio alerts when everything else including OpenAL games plays sound just fine... So, there you have it, as verbose as I could make it :-). I tried all I could find on this issue and had no luck so far... Any ideas?

    Read the article

  • Exadata X3, 11.2.3.2 and Oracle Platinum Services

    - by Rene Kundersma
    Oracle recently announced an Exadata Hardware Update. The overall architecture will remain the same, however some interesting hardware refreshes are done especially for the storage server (X3-2L). Each cell will now have 1600GB of flash, this means an X3-2 full rack will have 20.3 TB of total flash ! For all the details I would like to refer to the Oracle Exadata product page: www.oracle.com/exadata Together with the announcement of the X3 generation. A new Exadata release, 11.2.3.2 is made available. New Exadata systems will be shipped with this release and existing installations can be updated to that release. As always there is a storage cell patch and a patch for the compute node, which again needs to be applied using YUM. Instructions and requirements for patching existing Exadata compute nodes to 11.2.3.2 using YUM can be found in the patch README. Depending on the release you have installed on your compute nodes the README will direct you to a particular section in MOS note 1473002.1. MOS 1473002.1 should only be followed with the instructions from the 11.2.3.2 patch README. Like with 11.2.3.1.0 and 11.2.3.1.1 instructions are added to prepare your systems to use YUM for the first time in case you are still on release 11.2.2.4.2 and earlier. You will also find these One Time Setup instructions in MOS note 1473002.1 By default compute nodes that will be updated to 11.2.3.2.0 will have the UEK kernel. Before 11.2.3.2.0 the 'compatible kernel' was used for the compute nodes. For 11.2.3.2.0 customer will have the choice to replace the UEK kernel with the Exadata standard 'compatible kernel' which is also in the ULN 11.2.3.2 channel. Recommended is to use the kernel that is installed by default. One of the other great new things 11.2.3.2 brings is Writeback Flashcache (wbfc). By default wbfc is disabled after the upgrade to 11.2.3.2. Enable wbfc after patching on the storage servers of your test environment and see the improvements this brings for your applications. Writeback FlashCache can be enabled  by dropping the existing FlashCache, stopping the cellsrv process and changing the FlashCacheMode attribute of the cell. Of course stopping cellsrv can only be done in a controlled manner. Steps: drop flashcache alter cell shutdown services cellsrv again, cellsrv can only be stopped in a controlled manner alter cell flashCacheMode = WriteBack alter cell startup services cellsrv create flashcache all Going back to WriteThrough FlashCache is also possible, but only after flushing the FlashCache: alter cell flashcache all flush Last item I like to highlight in particular is already from a while ago, but a great thing to emphasis: Oracle Platinum Services. On top of the remote fault monitoring with faster response times Oracle has included update and patch deployment services.These services are delivered by Oracle Advanced Customer Support at no additional costs for qualified Oracle Premier Support customers. References: 11.2.3.2.0 README Exadata YUM Repository Population, One-Time Setup Configuration and YUM upgrades  1473002.1 Oracle Platinum Services

    Read the article

  • Why does my Messaging Menu code not work when split into functions?

    - by fluteflute
    Below are two python programs. They're exactly the same, except for one is split into two functions. However only the one that's split into two functions doesn't work - the second function doesn't work. Why would this be? Note the code is taken from this useful blog post. Without functions (works): import gtk def show_window_function(x, y): print x print y # get the indicate module, which does all the work import indicate # Create a server item mm = indicate.indicate_server_ref_default() # If someone clicks your server item in the MM, fire the server-display signal mm.connect("server-display", show_window_function) # Set the type of messages that your item uses. It's not at all clear which types # you're allowed to use, here. mm.set_type("message.im") # You must specify a .desktop file: this is where the MM gets the name of your # app from. mm.set_desktop_file("/usr/share/applications/nautilus.desktop") # Show the item in the MM. mm.show() # Create a source item mm_source = indicate.Indicator() # Again, it's not clear which subtypes you are allowed to use here. mm_source.set_property("subtype", "im") # "Sender" is the text that appears in the source item in the MM mm_source.set_property("sender", "Unread") # If someone clicks this source item in the MM, fire the user-display signal mm_source.connect("user-display", show_window_function) # Light up the messaging menu so that people know something has changed mm_source.set_property("draw-attention", "true") # Set the count of messages in this source. mm_source.set_property("count", "15") # If you prefer, you can set the time of the last message from this source, # rather than the count. (You can't set both.) This means that instead of a # message count, the MM will show "2m" or similar for the time since this # message arrived. # mm_source.set_property_time("time", time.time()) mm_source.show() gtk.mainloop() With functions (second function is executed but doesn't actually work): import gtk def show_window_function(x, y): print x print y # get the indicate module, which does all the work import indicate def function1(): # Create a server item mm = indicate.indicate_server_ref_default() # If someone clicks your server item in the MM, fire the server-display signal mm.connect("server-display", show_window_function) # Set the type of messages that your item uses. It's not at all clear which types # you're allowed to use, here. mm.set_type("message.im") # You must specify a .desktop file: this is where the MM gets the name of your # app from. mm.set_desktop_file("/usr/share/applications/nautilus.desktop") # Show the item in the MM. mm.show() def function2(): # Create a source item mm_source = indicate.Indicator() # Again, it's not clear which subtypes you are allowed to use here. mm_source.set_property("subtype", "im") # "Sender" is the text that appears in the source item in the MM mm_source.set_property("sender", "Unread") # If someone clicks this source item in the MM, fire the user-display signal mm_source.connect("user-display", show_window_function) # Light up the messaging menu so that people know something has changed mm_source.set_property("draw-attention", "true") # Set the count of messages in this source. mm_source.set_property("count", "15") # If you prefer, you can set the time of the last message from this source, # rather than the count. (You can't set both.) This means that instead of a # message count, the MM will show "2m" or similar for the time since this # message arrived. # mm_source.set_property_time("time", time.time()) mm_source.show() function1() function2() gtk.mainloop()

    Read the article

  • Octree subdivision problem

    - by ChaosDev
    Im creating octree manually and want function for effectively divide all nodes and their subnodes - For example - I press button and subnodes divided - press again - all subnodes divided again. Must be like - 1 - 8 - 64. The problem is - i dont understand how organize recursive loops for that. OctreeNode in my unoptimized implementation contain pointers to subnodes(childs),parent,extra vector(contains dublicates of child),generation info and lots of information for drawing. class gOctreeNode { //necessary fields gOctreeNode* FrontBottomLeftNode; gOctreeNode* FrontBottomRightNode; gOctreeNode* FrontTopLeftNode; gOctreeNode* FrontTopRightNode; gOctreeNode* BackBottomLeftNode; gOctreeNode* BackBottomRightNode; gOctreeNode* BackTopLeftNode; gOctreeNode* BackTopRightNode; gOctreeNode* mParentNode; std::vector<gOctreeNode*> m_ChildsVector; UINT mGeneration; bool mSplitted; bool isSplitted(){return m_Splitted;} .... //unnecessary fields }; DivideNode of Octree class fill these fields, set mSplitted to true, and prepare for correctly drawing. Octree contains basic nodes(m_nodes). Basic node can be divided, but now I want recursivly divide already divided basic node with 8 subnodes. So I write this function. void DivideAllChildCells(int ix,int ih,int id) { std::vector<gOctreeNode*> nlist; std::vector<gOctreeNode*> dlist; int index = (ix * m_Height * m_Depth) + (ih * m_Depth) + (id * 1);//get index of specified node gOctreeNode* baseNode = m_nodes[index].get(); nlist.push_back(baseNode->FrontTopLeftNode); nlist.push_back(baseNode->FrontTopRightNode); nlist.push_back(baseNode->FrontBottomLeftNode); nlist.push_back(baseNode->FrontBottomRightNode); nlist.push_back(baseNode->BackBottomLeftNode); nlist.push_back(baseNode->BackBottomRightNode); nlist.push_back(baseNode->BackTopLeftNode); nlist.push_back(baseNode->BackTopRightNode); bool cont = true; UINT d = 0;//additional recursive loop param (?) UINT g = 0;//additional recursive loop param (?) LoopNodes(d,g,nlist,dlist); //Divide resulting nodes for(UINT i = 0; i < dlist.size(); i++) { DivideNode(dlist[i]); } } And now, back to the main question,I present LoopNodes, which must do all work for giving dlist nodes for splitting. void LoopNodes(UINT& od,UINT& og,std::vector<gOctreeNode*>& nlist,std::vector<gOctreeNode*>& dnodes) { //od++;//recursion depth bool f = false; //pass through childs for(UINT i = 0; i < 8; i++) { if(nlist[i]->isSplitted())//if node splitted and have childs { //pass forward through tree for(UINT j = 0; j < 8; j++) { nlist[j] = nlist[j]->m_ChildsVector[j];//set pointers to these childs } LoopNodes(od,og,nlist,dnodes); } else //if no childs { //add to split vector dnodes.push_back(nlist[i]); } } } This version of loop nodes works correctly for 2(or 1?) generations after - this will not divide neightbours nodes, only some corners. I need correct algorithm. Screenshot All I need - is correct version of LoopNodes, which can add all nodes for DivideNode.

    Read the article

  • 12.04 making BCM4313 card work with aircrack-ng?

    - by Charles Forest
    I'm a real Linux Noob, just started using it (this month) and until now i had no issues. now i'm trying to set-up aircrack-ng on my laptop, but it seems like it's using the worst card possible (or almost) there is a TON of tutorial on this card (seems to be hell to set-up) i have tryed some, but i ended up uninstalling my drivers, messing with my desktops, and ended by having no more "X" to close my windows (i have no clue how i ended there) i just re-installed my linux (took me 2 hours to setup everything again), but now i'm a bit "Scared" to try tutorials randomly again. Right now it says the driver is wl, wich is not the one i want (AFAIK it's not supported) i'm not sure what kind of informations are needed, but here's what i think could be usefull. lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: i2c-i801 01:00.0 3D controller [0302]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df4] (rev a1) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb WIRELESS CARD 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac REST... 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: r8169 Kernel modules: r8169 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: xhci_hcd Also, if i'm "screwed" with my hardware, just tell me.

    Read the article

  • SQLAuthority News – Live Virtual Classroom New Trend in Technology

    - by nupurdave
    This blog post is by Nupur Dave, who is housewife and works from home. Changing times and a super busy lifestyle have rendered most of us powerless when it comes to doing what we love to do. I feel that a man never ceases to learn and his sole aim is to seek knowledge, and keep growing. However, our tight schedules and packed calendars mean that we really have to struggle to take some time out and follow the path towards learning. Like all working professionals with a family to take care of, I hardly found time to pursue my interests. However, it was getting increasingly important for me to upgrade my skills, not only for my personal quest for knowledge but to also substantiate my professional standing. When I came to know about Koenig Live Virtual Classroom from friends, it piqued my interest. I felt like it was the answer to all my concerns. Without wasting a single minute, I contacted Koenig for a demo class. Here are some of the highlights of Koenig LVC which instantly struck a chord in me: Online Training – Koenig offers 1-on-1 Online Training with the instructor at the other end. Doesn’t matter where I am sitting, in my office or at home, I can connect to my trainer from anywhere. Flexible Timings – The most comfortable part is you get to choose the time that suits you best. Economical -  No need to travel a thousand miles, the experts are right here on your computer screen. So no extra cost of travel, lodging and meals. 24X7 Lab Access: This is again a great feature that proved to be very beneficial in gaining a practical understanding of the subject. Powered by a data center, this facility offers students much to look forward to. 300+ Full Time Certified Experts: Be assured that you are learning from the best people in the industry. Customized Courses: Course material and training delivery is completely customized to suit your specific requirements. Official Courseware: The instructor teaches from official courseware of the vendor, depending on which course you have applied for – be it Microsoft, Cisco, Oracle or any other certification. Take Exam from Anywhere: Post completion of your IT training, you can take your certification exam from anywhere. Again, no need to travel a thousand miles to earn certified status. No Pre-Recorded Sessions: For those who still need clarification, it will be a live online classroom with trainers instructing you in real time. So you won’t get any surprises of getting pre-recorded sessions in place of your live instructor. Koenig’s Live Virtual Classroom methodology greatly exceeded my expectations. The instructor was highly skilled and very professional. I had concerns about the quality of AV on the computer screen, and whether I’ll be able to understand each topic in detail. However, the quality of video and sound, and the learning methodology used was impeccable. If you’re also facing time crunch and other commitment issues which are getting in the way of your professional development, LVC is the best solution to learn and grow. To know more about Student Experiences and Feedback of Koenig LVC, you can view their Testimonials. Reference: Nupur Dave (http://blog.sqlauthority.com)Filed under: SQL Authority

    Read the article

  • PASS summit 2013. We do not remember days. We remember moments.

    - by Maria Zakourdaev
      "Business or pleasure?" barked the security officer in the Charlotte International Airport. "I’m not sure, sir," I whimpered, immediately losing all courage. "I'm here for the database technologies summit called PASS”. "Sounds boring. Definitely a business trip." Boring?! He couldn’t have been more wrong. If he only knew about the countless meetings throughout the year where I waved my hands at my great boss and explained again and again how fantastic this summit is and how much I learned last year. One by one, the drops of water began eating away at the stone. He finally approved of my trip just to stop me from torturing him. Time moves as slow as a turtle when you are waiting for something. Time runs as fast as a cheetah when you are there. PASS has come...and passed. It’s been an amazing week. Enormous sqlenergy has filled the city, filled the convention center and the surrounding pubs and restaurants. There were awesome speakers, great content, and the chance to meet most inspiring database professionals from all over the world. Some sessions were unforgettable. Imagine a fully packed room with more than 500 people in awed silence, catching each and every one of Paul Randall's words. His tremendous energy and deep knowledge were truly thrilling. No words can describe Rob Farley's unique presentation style, captivating and engaging the audience. When the precious session minutes were over, I could tell that the many random puzzle pieces of information that his listeners knew had been suddenly combined into a clear, cohesive picture. I was amazed as always by Paul White's great sense of humor and his phenomenal ability to explain complicated concepts in a simple way. The keynote by the brilliant Dr. DeWitt from Microsoft in front of the full summit audience of 5000 deeply listening people was genuinely breathtaking. The entire conference throughout offered excellent speakers who inspired me to absorb the knowledge and use it when I got home. To my great surprise, I found that there are other people in this world who like replication as much I do. During the Birds of a Feather Luncheon, SQL Server MVP Ted Krueger was writing a script for replicating the food to other tables. I learned many things at PASS, and not all of them were about SQL. After three summits, this time I finally got the knack of networking. I actually went up and spoke to people, and believe me, that was not easy for an introvert. But this is what the summit is all about. Sqlpeople. They are the ones who make it such an exciting experience. I will be looking forward to the next year. Till then I have my notes and new ideas. How long was the summit? Thousands of unforgettable moments.

    Read the article

  • Nokia Lumia 920 Windows Phone 8 Announcement

    - by Tim Murphy
    Today Nokia and Microsoft had an event to officially introduce the Lumia 920.  Below is a rundown of some of the things I found interesting. As a person who likes photography there was a lot to drool over.  The main feature that caught my attention was PureView with its optical stabilization.  This alone should improve the majority of you pictures.  Add to that the SmartShoot Object remover that uses multiple images to remove unwanted people or objects that move through your picture and you never have to accept reality again. For the most part the lenses concept introduced in Windows Phone 8 just makes the usability of leveraging camera better.  Of course that is Microsoft’s selling point.  One lens that caught my attention was the Bing lens.  I have to say it is about time that we can take pictures and use them to search for answers using Bing. There were a couple of features shown that involved augmented reality.  One was similar to the yapf application that is already in the market which overlays restaurants and other destination over live camera views.  The other was using the navigation directions with a live view. Then you get down to some of the physical features of the Lumia 920.  The one that got the most stage time is that it has a great 2000mah battery which can be charged wirelessly.  They also pointed out the improved glare reduction of the 4.5 in. curved glass screen.  This hardware improvement is improved further with software that detects glare conditions and adjusts the display attributes to enhance viewing ease. Adding to the wireless cool factor of the Lumia 920 is the general NFC capabilities.  This was demonstrated with NFC docking stations as well as JBL speakers and headphones. There was one more hardware feature that I applauded.  The super sensitive touch screen did away with one of my pet peeves with capacitive touch screens.  You will never have to remove you gloves to operate your phone again.  The mittens that they did the demo with looked more like boxing gloves. I was disappointed with Joe Belfiore said that they were only going to show a couple of new features of the Windows Phone 8 and would hear more at future events.  One of the things he did show is the ability to customize which buttons you preferred as defaults in IE10.  For example you could have the folders button where the refresh button normally is.  He also showed that at long last you can natively take screenshots on your phone.  Hopefully he will be back quickly to give us the rest of the features. The most disappointing part of the event was that we never found out when they would be released or how much they would cost.  Let’s hope this comes soon.  Even with these couple of items still left on my wish list I can’t wait to get my hands on a Lumia 920.  del.icio.us Tags: Windows Phone,Windows Phone 8,Nokia,Lumia,Lumia 920,Microsoft

    Read the article

  • User password rejected on login screen but accepted on text console login

    - by MadsirR
    I had to force shutdown my Ubuntu 12.04 64-bit, after which I restarted and tried to log in as a normal user, which was rejected several times. I then logged in as guest and tty to my regular account with use of my normal password, which succeeded. (So the password is still valid.) How can I gain access again via the normal login procedure (welcome screen)? Update: When I tried to log on with my new password, it again was denied. When I deliberately tried to log on with a faulty password, an error message came back, saying: Access denied - wrong password. I suppose, the first time the password was not rejected, but the procedure was aborted for some reason. Some additional info after trying to find a solution: I am conviced it is a Compiz-issue. Why? before this happened, all sessions came to a grinding halt, regardless of being logged on in a 2D or 3d environment. I found a link saying that I should remove Compiz and proceed in a 2D environment, which initiall worked without a glitch, until my system went into a state of total obivium. Only after that, the above mentioned troubles appeared. In the meantime I have happened to find a thread with reference 17381, describing exactly what I have experienced. For now, I will try to cure this situation (later this week) and revert with the results, hopefully to close this post. In the meantime I cordially thank you all, even if you didn't kill the problem; you gave me the inspiration to look further and find a possible cure. Update2: After 15 hrs of trial-and-error I callled it quits (When I decided to tackle this problem, I've given myself 12 hrs, to avoid massive loss of time.) I decided to re-install Precise, since the "point 1" version has become availabe. Log-in is back to normal, as is the graphic environment. Response to mouse input is stil appalling, especially when I have a series of screens open as "children"of a "parent" screen. It still completely locks up. I have installed Enlightenment, Gnome classic, Gnome 3, Cinnamon and they all behave in a similar fashion. FOR THOSE WHO NEED A WAY-OUT IN SITUATIONS OF THE LIKE: Open a terminal with [Ctrl+Alt+F2]. Type [sudo killall Firefox] (or whatever application you wish to terminate). Key in your password. Return to your graphical screen with [Ctrl+Alt+F7], and Bob's your uncle. Just re-open Firefox like nothing happened. Next time you are stuck: [Ctrl+Alt+F2], upward arrow till you meet the command of your desire, [Ctrl+Alt+F7], etcetera. Hope this is of help. My next move will be to upgrade the kernel to 3.4 from the repositories for 12.10. However, since this entails a totally new situation, I will start a new thread on this site to avoid topic pollution I will keep you posted. Still.

    Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >