Search Results

Search found 46442 results on 1858 pages for 'aaa super'.

Page 122/1858 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

  • Static routing on a TP-Link TL-WR1043ND

    - by igor
    My home network setup looks like this: Both routers are TP-Link TL-WR1043ND routers. The basement router handles all devices in the house that are connected via cable, handing out addresses for the 10.89.49.0/24 network via DHCP. Wireless doesn’t really work from the basement, as the signal is too weak, so I have disabled it. To do WiFi, I have added a second (identical) router downstairs. On the WAN side it is assigned the 10.89.49.101 IP address from the basement router, and on its LAN it provides the 10.89.7.0/24 network. Basic internet access works flawlessly from any device this way. I am now facing the problem that I am not able to communicate (e.g. SSH) between all devices, wired or wireless. I am able to connect from a wireless device to a wired device, for example SSH-ing from 10.89.7.X to 10.89.49.Y, but it doesn’t work the other way round—despite the fact that I have added a static route to the basement router: Does anybody have any idea on how to solve it? Both routers have already been upgraded to use the most recent firmware from TP-Link.com (Build 110429), to no avail. Errata: I would like to stick with the official firmware, switching to something like DD-WRT or OpenWrt only as a last resort.

    Read the article

  • Trouble connecting a Ubuntu system to IPv6 tunnel over NAT

    - by John Millikin
    I'm trying to set up an IPv6 tunnel, via Hurricane Electric's tunnel-broker service. I've configured my system using their example commands: # $ipv4a = tunnel server's IPv4 IP # $ipv4b = user's IPv4 IP # $ipv6a = tunnel server's side of point-to-point /64 allocation # $ipv6b = user's side of point-to-point /64 allocation ip tunnel add he-ipv6 mode sit remote $ipv4a local $ipv4b ttl 255 ip link set he-ipv6 up ip addr add $ipv6b dev he-ipv6 ip route add ::/0 dev he-ipv6 And have configured my desktop to be in my NAT router's DMZ. The router is running Tomato firmware. But I can't ping any IPv6 services: $ ping6 -I he-ipv6 '2001:470:1f04:454::1' PING 2001:470:1f04:454::1(2001:470:1f04:454::1) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes From 2001:470:1f04:454::2 icmp_seq=1 Destination unreachable: Address unreachable From 2001:470:1f04:454::2 icmp_seq=2 Destination unreachable: Address unreachable I can ping my local address: $ ping6 -I he-ipv6 '2001:470:1f04:454::2' PING 2001:470:1f04:454::2(2001:470:1f04:454::2) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes 64 bytes from 2001:470:1f04:454::2: icmp_seq=1 ttl=64 time=0.037 ms 64 bytes from 2001:470:1f04:454::2: icmp_seq=2 ttl=64 time=0.039 ms I don't know much about routing, but results I found online suggested the output of ip -6 route and ip addr could be useful: $ ip -6 route 2001:470:1f04:454::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 fe80::/64 dev virbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 default dev he-ipv6 metric 1024 mtu 1480 advmss 1420 hoplimit 4294967295 $ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100 link/ether 00:1c:c0:a1:98:b2 brd ff:ff:ff:ff:ff:ff inet 192.168.1.10/24 brd 192.168.1.255 scope global eth1 inet6 fe80::21c:c0ff:fea1:98b2/64 scope link valid_lft forever preferred_lft forever 3: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 36:4c:33:ab:0d:c6 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 inet6 fe80::344c:33ff:feab:dc6/64 scope link valid_lft forever preferred_lft forever 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:76:62:6e:65:74 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 7e:29:5e:7c:ba:93 brd ff:ff:ff:ff:ff:ff 6: sit0: <NOARP> mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0 7: he-ipv6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN link/sit 24.130.225.239 peer 72.52.104.74 inet6 2001:470:1f04:454::2/64 scope global valid_lft forever preferred_lft forever inet6 fe80::1882:e1ef/128 scope link valid_lft forever preferred_lft forever

    Read the article

  • Make My Own Made Java Based Text editor as default Text Editor in Windows

    - by Rohan Sharma
    I have Made a Text Editor in Java and i want to make it default text editor ,That is like in windows we have notepad as default text whose icon shows on all text files and double clicking those file(s) opens the file(s) in notepad window.. I Want to achieve same Task of Making my texte editor as default one...but only right clicking a text file and selecting my text editor as default app for opening text files do not servers the purpose,Because my text editor will not accept the file input that way,its made to accept the file input only by FileChooser...so Is There any library in java to achieve that task Of Accepting The File Input That way???

    Read the article

  • zfs setup question

    - by Staale
    Currently I have a linux storage box and server with 4x750gb harddrives in raid-5 with ext3. I have ordered 3x1.5tb disks to upgrade this. Here is my planned upgrade: Backup: Format the 1.5 tb disks Copy all data from the raid-5 disks to the 1.5tb disks Destroy the raid-5 array. New setup: Create a VirtualBox system and install Nexenta (OpenSolaris + ubuntu) on it. Create a zfs pool with zraid1 with the 4 750gb disks. Copy from 1.5tb disks to the virtualbox zfs pool Format the 1.5tb disks. Replace 3 off the 750gb disks with 1.5tb disks. Reuse the 750gb disks elsewhere. The reason I wish to use one 750gb disk is since I can't grow the disk count in a raidz array, and this gives me the option off replacing that disk later for an extra 750gb storage. Would the ZFS performance be good running through virtualbox? Or will the performance overhead be too large? Will I get 1.5tb+1.5tb+750gb storage on the zraid? Or just 750gbx3 until all disks are 1.5tb?

    Read the article

  • Sound card / microphone impedance mismatch

    - by axk
    First of all I'm not completely sure this is impedance mismatch, but from what I found on the Internet I believe it is. It seems to be a common problem. The question is not as much about solving the problem as about why it is happening (if I'm right about the cause of the problem, of course). I had this quiet microphone problem with several built in cards and microphones and now with a Creative Audigy SE. There's a microphone boost option which introduces a lot of noise with volume increase, but even this doesn't seem to give loud enough sound in some cases. The mic on my current headphones is very quiet with Audigy SE without the boost but is very loud and low noise with an external Sound Blaster Connect. So the question is have I just been unlucky with my sound cards and microphones or is it a common problem? And if it is a common problem why is it so difficult for the vendors to standardize on the sound card / microphone impedance? Edit: the OS is Windows (XP/7), but I don't believe it is OS-specific.

    Read the article

  • How to check a digital certificate?

    - by StackedCrooked
    I have extracted a certificate from a cable modem. Now I want to verify if this certificate is valid. If I understand correctly, the verification process consists of having the issuer sign the subject's public key and then comparing the result with the subject's signature. This signing process is done using the issuer's private key, which nobody but the issuer has access to. So even if I have both certificates on my PC, there is no way for me to verify the subject's validity. From this I can only conclude that the verification must be implemented as a remote service. The problem is that I don't know what remote service I need to access to verify this certificate. The issuer is "AVM GmbH Cable Modem Root Certificate Authority". How can I find the webservice for verification? Is there standard lookup mechanism for this?

    Read the article

  • What is the § ± key for on Mac keyboards?

    - by Pat Wallace
    Apple's keyboards have a new key, with § and ± symbols on it. Can somebody tell me what these keys are for, and where I should use them? I am aware the symbols have mathematical uses, but I assume they must do something important as well to be on the core keyboard. Or are they just the 'Scroll Lock' of the Apple world?

    Read the article

  • Using a cell phone as a PC remote control

    - by Mahmoud Hossam
    I have a sony ericsson phone that can control any PC using bluetooth, as long as it has permission to do so, of course. It doesn't require any server software of any kind, it just works out of the box with any PC (or mac) that is bluetooth enabled. Is there any program I could use that has the same functionality? I don't want to install anything on the PC, I just want to be able to use the program installed on the phone. I prefer Java ME/Android/Symbian apps, I don't have an iPhone.

    Read the article

  • Intel Core i7 QuadCore on HP Pavilion dv7 Overheating Issues

    - by kellax
    I bought a brand new HP notebook: HP Pavilion dv7-6b21em BeatsAudio edition. The notebook is about 2 months old and has pretty nasty overheating problem. I mainly use it for development however i do play some games. The disturbing thing is that the computer is loud on pretty simple tasks. Here are the specs: CPU: Intel Core i7-2670QM QuadCore ( 8 threads ) @ 2.20 GHz RAM: ( 8GB ) 2x 4GB @ 1066 HDD: 1TB 7200 GPU: ATI Radeon HD 6770M 1GB Dedicated DDR OS: Windows 7 64bit Enterprise I have an external monitor runing on VGA port an 22' Samsung SyncMaster S24B300 CPU Heat Statistics Platform: rPGA 988B (Socket G2) Frequency: cca. 3000 Mhz VID: 1.1809 - 1.2059 v Revision: D2 CPUID: 0x206A7 TDP: 45.0 Wats, Lithographu: 32 nm Heat: Tj. Max: 100*C, Power 4.5 - 5.9 Wats Core #0: 63*C Load on all is about 0 to 2% Core #1: 65*C Core #2: 66*C Core #3: 67*C I opened the notebook the fan is working fine there is no dust but still right now the fan is pretty loud even tho all i have open is FireFox. When i run a game the heat jumps to whopping 90-97*C. It has not shut down due to overheating yet but the loud fan is pretty annoying considering I'm not really doing anything stressfull. Is there anything i can do to fix this is it maybe a BIOS issue ? I have all drivers updated tho to the latest. I have very few background processes running consuming bare 2GB of RAM and about 2% of CPU. I had it serviced they said there is nothing wrong with it. But i feel that a Notebook that costs 1.2k Euros cant be like this.

    Read the article

  • Batch-Renaming Movies using Regex

    - by Nate Mara
    So, I've been trying to rename some movie files using regular expressions, but so far I have been only marginally successful. The goal is to parse files like this: 2001.A.Space.Odyssey.1968.720p.BluRay.DD5.1.x264-LiNG.mkv And rename them Like this: 2001 A Space Odyssey (1968).mkv I created the pattern: ^(.+).(\d{4}).+.(mp4|avi|mkv)$ With the output: \1 (\2).\3 Now, this works perfectly fine when I have movies with one-word titles, but when there is more than one word separated by a period, the regex fails to grab anything. What am I doing wrong here?

    Read the article

  • What is the minimum power supply wattage needed for a Pentium 2.4GHz system?

    - by scottmarlowe
    It looks like I've got a dead Antec True 330 power supply in an older desktop that has an Intel D845PESV motherboard, a Pentium 2.4GHz processor, 2 dvd/cd writers, 2 hard drives, and other typical devices. I have an even older computer that is not being used that has a 200W power supply. Can a 200W power supply drive what I've listed above? Or, put another way, what is the minimum power supply specs for the above system? (A new 350W power supply will run me $30--so buying a new one is not a problem--but I'm curious about the question nonetheless).

    Read the article

  • How to use a DVI/HDMI monitor with Mac Mini's DisplayPort?

    - by dr dork
    If I buy a Mac Mini, how can I use it with my Dell monitor? The Dell does not have a DisplayPort, only DVI and HDMI. I was looking at the Mac Minis and noticed they don't have DVI or VGA ports. Does the Mac Mini come with any kind of an adapter that will allow me to use my existing Dell monitor? Thanks in advance for your help, I'm going to start researching this question right now.

    Read the article

  • What's wrong with my custom patch cables?

    - by stu42j
    I have a box of bulk Cat5e riser cable left over from when I had my house wired. I figured I could use this to make some custom length cables for connecting my computers, switches, etc. I had a crimper already so I bought a bag of RJ45 plugs. I made a few cables several years ago, but my experience/knowledge with this sort of thing is minimal. None of my cables are working. I don't have a tester so I just plug the cable into a computer and switch but I get no link light. I wired them them all straight-through and visual inspection doesn't show any problems. Any ideas what I might be doing wrong?

    Read the article

  • Setting up dynamic DNS for linked router

    - by cherrun
    I have a 'main' router that receives the internet signal from the ISP and another one in my room, connected with a cable. The main router is running its original firmware and is very limited in its features, unfortunately I can not change this router, since my phone company has some hardcoded stuff in there and the internet will only work with this router. My second router is running DD-WRT firmware. Now I need to set up dynamic DNS, so I can access my NAS machine remotely, which is connected to the second router. As mentioned, this can't be done with the main router, due to its limited features. DHCP is turned off on the second router, since it gets its IP from the main one. Is there a possibility to set up dynamic DNS on the second router, without changing any (or much) on the main router? Maybe as a side note: I live in Germany, don't know if the set up of the routers are different in other countries.

    Read the article

  • change ubuntu brightness using external keyboard

    - by Sarfraz
    I have a hp pavilion g6 laptop. My keyboard has stopped working so I cannot use laptop keyboard to change the brightness. The issue is my brightness is set at 0 so I cannot see anything once ubuntu loads. I have attached an external keyboard via usb, I was wondering how can I change the brightness using the external keyboard. Is there a way. I cannot login or see anything once ubuntu is loaded its total dark on the login screen. Any help is appreciated.

    Read the article

  • Opensuse 11.1 KDE4 Dropbox autostart issue

    - by OpensuseNewbie
    I am using KDE4 with the lastest version of opensuse, and I want to autostart everytime I turn on my computer. I followed this website: http://antrix.net/journal/techtalk/dropbox%5Fkde.html I got dropbox to work and everything is fine. I created a symlink to the dropboxd file to my ~/.kde4/AUtostart, but does not work. The command line I used to create the symlink is: ln -s ~/.dropbox-dist/dropdoxd ~/.kde4/Autostart/ I've check the symlink itself to see where it "pointed to" in it's properties, and it was the right file. The drobox-dist folder is in my /home/"username", and the dropboxd does work. I've tried using "sudo ln -s ~/.dropbox-dist/dropdoxd ~/.kde4/Autostart/" but no symlink was created. I've checked other blogs and they all say the same things to make dropbox to autostart up, yet it is not working. Does anyone know what's wrong?

    Read the article

  • Drive XML returning Windows Volume Shadow Service Error

    - by Ssvarc
    I'm trying to image a SATA laptop hard drive, using DriveImageXML, that is attached to my computer via a USB adapter. I'm running Win7 Ultimate 64 bit. DriveXML is returning: Could not initialize Windows Volume Shadow Service (VSS). ERROR C:\Program Files (x86)\Runtime Software\Drivelmage XML\vss64.exe failed to start. ERROR TIMEOUT Make sure VSSVC.EXE is running in your task manager. Click Help for more information. VSSVC.EXE is running in Task Manager, as is VSS64.exe. Looking at the FAQ on the Runtime webpage this turned up: Please verify in Settings-Control Panel-Administrative Tools-Services that the following services are enabled: MS Software Shadow Copy Provider Volume Shadow Copy Also make sure you are able to stop and start these services. Possible reasons for VSS failures: For VSS to work, at least one volume in your computer must be NTFS. If you use only FAT drives, VSS will not function. The required NTFS volume does not need to be identical with the volume you want to image. You should make sure that VSSVC.EXE is running in your task manager. If the problems persist, registering "oleaut.dll" and "oleaut32.dll" using "regsvr32" might help. Both of those services are running and can be started and stopped without issue. Using "regsvr32" to register ""oleaut32.dll" returns successful, but "oleaut.dll" returns: The module "oleaut.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. Some other information that might be relevant. Browsing to the drive is successful, but accessing certain folders returns an "access" error. Windows runs a permissions adder that adds the current user profile to the NFTS permissions. Could this be the cause of the issue? DriveImage XML is running as Administrator. Thoughts?

    Read the article

  • TS-7800 Hangs on bootup

    - by Reid
    I have a TS-7800, and it typically boots from the SD card inserted in it. When I tried to boot it up today, it hung on the syslog line. I am now having "Read only file system" problems. What has gone wrong? Bootup console: >> Copyright (c) 2008, Technologic Systems >> Booting from SD card... . . . . >> Booting to SD Card... INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. mount: can't find / in /etc/fstab or /etc/mtab Cleaning up ifupdown...rm: cannot remove `/etc/network/run/ifstate': Read-only file system Loading kernel modules...done. Checking all file systems... fsck 1.37 (21-Mar-2005) ... done. none on /dev/pts type devpts (rw,gid=5,mode=620) /etc/init.d/rcS: line 39: /tmp/.clean: Read-only file system Setting up networking...done. Setting up IP spoofing protection: rp_filter. Enabling packet forwarding...done. Configuring network interfaces...ifup: failed to open statefile /etc/network/run/ifstate: Read-only file system done. Starting portmap daemon: portmap. /etc/init.d/rcS: line 39: /tmp/.clean: Read-only file system /etc/init.d/rcS: line 24: /var/run/utmp: Read-only file system rm: cannot remove `/var/lib/urandom/random-seed': Read-only file system urandom start: failed. Recovering nvi editor sessions... done. INIT: Entering runlevel: 3 Starting system log daemon: syslogd . Starting kernel log daemon: klogd. Starting MTA: open: Read-only file system touch: cannot touch `/var/lib/exim4/config.autogenerated.tmp': Read-only file system chown: cannot access `/var/lib/exim4/config.autogenerated.tmp': No such file or directory chmod: cannot access `/var/lib/exim4/config.autogenerated.tmp': No such file or directory chmod: changing permissions of `/var/lib/exim4/config.autogenerated': Read-only file system /usr/sbin/update-exim4.conf: line 260: cannot create temp file for here document: Read-only file system /usr/sbin/update-exim4.conf: line 387: /var/lib/exim4/config.autogenerated.tmp: Read-only file system 2002-01-01 01:31:36 Cannot open main log file "/var/log/exim4/mainlog": Read-only file system: euid=0 egid=0 2002-01-01 01:31:36 non-existent configuration file(s): /var/lib/exim4/config.autogenerated.tmp 2002-01-01 01:31:36 Cannot open main log file "/var/log/exim4/mainlog": Read-only file system: euid=0 egid=0 exim: could not open panic log - aborting: see message(s) above Invalid new configfile /var/lib/exim4/config.autogenerated.tmp not installing /var/lib/exim4/config.autogenerated.tmp to /var/lib/exim4/config.autogenerated Starting internet superserver: inetd. Starting OpenBSD Secure Shell server: sshd. Starting NFS common utilities: statdStarting periodic command scheduler: cron/usr/sbin/cron: can't open or create /var/run/crond.pid: Read-only file system . Starting web server (apache2)...(30)Read-only file system: apache2: could not open error log file /var/log/apache2/error.log. Unable to open logs failed! Debian GNU/Linux 3.1 ts7800 ttyS0 ts7800 login:

    Read the article

  • Save searches in Google Reader

    - by pinniger
    Ok, I’m trying to find a way to search my rss feeds in Google Reader every day for certain phrases. If any of the phrases are found, I want to be notified. I thought Google Alerts would do this no problem, but it does not. Does anybody know of any services or any other way of doing this?

    Read the article

  • How can I disable Lumension Sanctuary

    - by Mr. Flibble
    I'm an administrator on my computer but I can't work out how to uninstall/disable Lumension Sanctuary. There is no Uninstall button in the uninstall programs list. I've disabled the service (Sanctuary command and control) but it's had no effect. Any ideas? I'm on Windows XP BTW.

    Read the article

  • Stop a runaway launchd process on OS X Leopard

    - by Skylarking
    I created a launchd .plist file to in order to have a python script run every hour. I ended up editing and later deleting the .plist file ( in /Library/LaunchDaemons )... but somehow launchd is still trying to run the script.. The file that the original .plist was calling is also no longer present ( it was in /usr/bin ).. Now every 10 seconds launchd is still attempting to run the script, fails, and respawns... I tried fixing this with Lingon.... to no avail.. Is there a way to kill this process for good? I tried logging out and restarting as well... Machine is running 10.5.8

    Read the article

  • iPod touch has extremely slow wifi, drops packets - only on my router

    - by mskfisher
    I just purchased an iPod Touch. I am having a lot of trouble with its speeds on my Tenda W311R, but it has no speed problems on my neighbor's Netgear router. It will connect and authenticate to my network, but the Speed Test app from speedtest.net shows rates near 20-50 kbps. If I run the speed test immediately after powering the iPod on, it will get speeds of 10-20 Mbps, like it should - but the speeds slow down to the kbps range abut 10-15 seconds afterward. I get the same behavior with encryption and without encryption, and regardless of N, G, or B compatibility settings in the router. I've tried rebooting the iPod and resetting the network settings, but it's still slow. I've tried pinging the iPod from another computer, and it shows about 40% packet loss: $ ping 192.168.0.111 PING 192.168.0.111 (192.168.0.111): 56 data bytes 64 bytes from 192.168.0.111: icmp_seq=0 ttl=64 time=14.188 ms 64 bytes from 192.168.0.111: icmp_seq=1 ttl=64 time=11.556 ms 64 bytes from 192.168.0.111: icmp_seq=2 ttl=64 time=5.675 ms 64 bytes from 192.168.0.111: icmp_seq=3 ttl=64 time=5.721 ms Request timeout for icmp_seq 4 64 bytes from 192.168.0.111: icmp_seq=5 ttl=64 time=6.491 ms Request timeout for icmp_seq 6 64 bytes from 192.168.0.111: icmp_seq=7 ttl=64 time=8.065 ms Request timeout for icmp_seq 8 Request timeout for icmp_seq 9 Request timeout for icmp_seq 10 64 bytes from 192.168.0.111: icmp_seq=11 ttl=64 time=9.605 ms Signal strength is good - I'm never more than 20 feet from my access point, and it exhibits the same behavior if I'm standing next to the router. It works just well enough to receive text, but videos don't work at all. App downloads are hit and miss. I've tweaked just about all of the settings I can see to tweak, and I'm at a loss. I have also been searching Google for the past three days, all to no avail. Any suggestions?

    Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >