Search Results

Search found 11478 results on 460 pages for 'disk partition'.

Page 122/460 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• Installing Ubuntu 12.04.1 x64 with Fake RAID 1 [SOLVED]

  - by Arkadius

  I had: Software: Dual boot with Windows XP Ubuntu 10.04 LTS x32 Hardware Fake RAID 1 (mirroring) with 2x1 TB: Partition 1 - Windows Partition 2 - SWAP Partition 3 - / (root) Partition 4 - Extended Partition 5 - /home Partition 6 - /data arek@domek:/var/log/installer$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sda3 528506370 570468149 20980890 83 Linux /dev/sda4 570468150 1953118439 691325145 5 Extended /dev/sda5 570468213 675340469 52436128+ 83 Linux /dev/sda6 675340533 1953118439 638888953+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sdb1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sdb2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sdb3 528506370 570468149 20980890 83 Linux /dev/sdb4 570468150 1953118439 691325145 5 Extended /dev/sdb5 570468213 675340469 52436128+ 83 Linux /dev/sdb6 675340533 1953118439 638888953+ 83 Linux arek@domek:/var/log/installer$ ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 236 Oct 7 20:17 control lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha -> ../dm-0 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha4 -> ../dm-4 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha5 -> ../dm-5 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha6 -> ../dm-6 I wanted to upgrade from 10.04 x32 to 12.04 x64 using FRESH installation. So, run installation of Ubuntu 12.04.1 x64 LTS using alternate CD. During the installation I selected manual partitioning and to: - Use and Format / (root) - Use and Format SWAP - Use and Keep data on /home - Use and Keep data on /data After I clicked "Continue" I get error creating and formatting SWAP partition. I go to terminal with Alt + F2 (?) and hit enter. I discovered that there was visible RAID as only disk with NO partitions. Something like this: arek@domek:/var/log/installer$ ls -l /dev/mapper/ lrwxrwxrwx 1 root root 7 Oct 7 20:17 /dev/mapper/pdc_jhjbcaha -> ../dm-0 arek@domek:/var/log/installer$ ls -l /dev/dm* brw-rw---- 1 root disk 252, 0 Oct 7 20:17 /dev/dm-0 So I switched to log console Alt+F3 (?) and saw errors like below: Oct 7 14:02:45 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:45 anna-install: Installing dmraid-udeb Oct 7 14:02:45 anna[12599]: DEBUG: retrieving dmraid-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving libdmraid1.0.0.rc16-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving kpartx-udeb 0.4.9-3ubuntu5 Oct 7 14:02:49 disk-detect: Serial ATA RAID disk(s) detected. Oct 7 14:02:55 disk-detect: Enabling dmraid support. Oct 7 14:02:55 disk-detect: RAID set "pdc_jhjbcaha" was activated Oct 7 14:02:55 HERE --> dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha Oct 7 14:02:56 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: INFO: Menu item 'partman-base' selected Oct 7 14:02:57 kernel: [ 316.512999] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 7 14:02:57 kernel: [ 316.523221] Btrfs loaded Oct 7 14:02:57 kernel: [ 316.534781] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 7 14:02:57 kernel: [ 316.554749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 7 14:02:57 kernel: [ 316.555336] SGI XFS Quota Management subsystem Oct 7 14:02:58 md-devices: mdadm: No arrays found in config file or automatically Oct 7 14:02:58 partman: No matching physical volumes found Oct 7 14:02:58 partman: No volume groups found Oct 7 14:02:58 partman: Reading all physical volumes. This may take a while... Oct 7 14:02:58 partman-lvm: No volume groups found Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:06:11 HERE --> partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory Oct 7 14:07:28 init: starting pid 401, tty '/dev/tty2': '-/bin/sh' Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo As You can see there are 2 errors Oct 7 14:02:55 dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha and Oct 7 14:06:11 partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory I looked in the internet and try to run command "dmraid -ay" and get something like that: dmraid -ay /dev/mapper/pdc_jhjbcaha -> Already activated /dev/mapper/pdc_jhjbcaha1 -> Successfully activated /dev/mapper/pdc_jhjbcaha2 -> Successfully activated /dev/mapper/pdc_jhjbcaha3 -> Successfully activated /dev/mapper/pdc_jhjbcaha4 -> Successfully activated /dev/mapper/pdc_jhjbcaha5 -> Successfully activated /dev/mapper/pdc_jhjbcaha6 -> Successfully activated Then I returned to installer with Alt+F1 (?) and click "Return" to return to partitioning menu. I did NOT change anything just selected again "Continue" and everything goes smoothly. I hope this will help someone. arkadius

  Read the article

• How to use more than 3 virtual disks in Linux using CentOS and XenServer

  - by 010110110101

  I've attached 5 virtual disks to a Virtual Machine in Citrix XenServer. The VM has the xs-tools installed. Initially it said that it couldn't add so many disks. After I installed the xs-tools, it let me add all the disks. But /dev doesn't show all the disks. It shows these: /dev/xvda /dev/xvdb /dev/xvdc /dev/cdrom Perhaps it is bound by the limits of an IDE bus? (3 disks + CD-ROM) If so, how does one change the VM to use SCSI? Edit: According to the documentation: 2.6.3. VM Block Devices In the PV Linux case, block devices are passed through as PV devices. XenServer does not attempt to emulate SCSI or IDE, but instead provides a more suitable interface in the virtual environment in the form of xvd* devices. It is also possible to get an sd* device using the same mechanism, where the PV driver inside the VM takes over the SCSI device namespace. This is not desirable so it is best to use xvd* where possible for PV guests (this is the default for Debian and RHEL). For Windows or other fully virtualized guests, XenServer emulates an IDE bus in the form of an hd* device. When using Windows, installing the Citrix Tools for Virtual Machines installs a special PV driver that works in a similar way to Linux, except in the fully virtualized environment. Still, with 5 virtual disks attached, I don't see the other xvd devices. Edit #2: (attached requested info) Host Machine: XenServer 6.1 Linux version 2.6.32.43-0.4.1.xs1.6.10.777.170770xen (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Wed Apr 17 05:52:03 EDT 2013 Guest Machine: CentOS release 6.4 (Final) Linux version 2.6.32-358.6.2.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu May 16 20:59:36 UTC 2013 Output of 'fdisk -l' on Guest Machine: Note, the disk beyond the first 3 attached are not displaying -- there should be 4 100GB disks. (There are a total of 5 disks displayed in XenCenter -- 16GB, 100GB, 100GB, 100GB, 100GB) Disk /dev/xvdb: 107.4 GB, 107374182400 bytes 255 heads, 63 sectors/track, 13054 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xfb6c95b9 Device Boot Start End Blocks Id System /dev/xvdb1 1 13054 104856223+ 83 Linux Disk /dev/xvda: 17.2 GB, 17179869184 bytes 255 heads, 63 sectors/track, 2088 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e5f41 Device Boot Start End Blocks Id System /dev/xvda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/xvda2 64 2089 16264192 8e Linux LVM Disk /dev/xvdc: 107.4 GB, 107374182400 bytes 255 heads, 63 sectors/track, 13054 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed249ced Device Boot Start End Blocks Id System /dev/xvdc1 1 13054 104856223+ 83 Linux Disk /dev/mapper/vg_blue-lv_root: 14.6 GB, 14571012096 bytes 255 heads, 63 sectors/track, 1771 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_blue-lv_swap: 2080 MB, 2080374784 bytes 255 heads, 63 sectors/track, 252 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 I see that the Linux versions say SMP. The Guest VM doesn't say "xen" in the name. However, I have already run yum install kernel-xen. Could be a clue?

  Read the article

• Removing mdadm array and converting to regular disks while preserving data

  - by Jeffrey Kevin Pry

  I have a 6 disk (2TB each) mdadm RAID 5 volume created in Ubuntu 12.04 Server. However, I'm moving to a different solution and want to "unraid" my disks but keep the data. Only 50% is in use. From what I can surmise I basically have to do this recursively for each physical disk. Fail the disk Format the failed disk Move a portion of files to the new disk. Reshape the array Shrink the logical volume md0 This seems like a very time consuming process. Is there an easier way to do this (automatically perhaps) without buying new disks to temporarily hold the data? I am also aware that during this processing my RAID volume will be degraded and vulnerable the entire time. I am not too concerned about this and will be using battery backup and moving the most important files off first. Thank you for your help!

  Read the article

• Why don't I have the option ''Install Ubuntu alongside with them''

  - by almqgh

  Why dont I have this option? here are my disk sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5b53cc54 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 1153767021 576678711 7 HPFS/NTFS/exFAT /dev/sda3 1216962560 1250050047 16543744 7 HPFS/NTFS/exFAT /dev/sda4 1250050048 1250261679 105816 c W95 FAT32 (LBA) Disk /dev/sdb: 4005 MB, 4005527552 bytes 32 heads, 63 sectors/track, 3880 cylinders, total 7823296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x20d8782d Device Boot Start End Blocks Id System /dev/sdb1 * 63 7822079 3911008+ c W95 FAT32 (LBA)

  Read the article

• I/O errors are reported when I try to install Ubuntu, but the SMART data is good. Is my hard disk dying?

  - by James

  When I try to install linux, it tells me there is an input output error on dev sda. I have tried both Ubuntu and Mint on two different computers. So that narrows it down to the hdd. After hours of googling and trying different things I tried making the hardrive ext4 with gparted but that comes up with an error. This makes me think that the hdd is bad. There are a few reasons I think the hdd isn't bad. I can use the hdd in windows fully. Windows and gparted disk health checks both say it is fine. Its SMART data is all good. So... help?

  Read the article

• Grub not showing installed kernels

  - by Markus

  Although I have several kernel versions in /boot and having them in my grub.cfg, they are not displayed in the grub boot menu. Running update-grub seems to work, as it puts the kernels in the grub.cfg in /boot/grub. Issueing it gives the following output: Generating grub.cfg ... cat: /boot/grub/video.lst: Datei oder Verzeichnis nicht gefunden Found linux image: /boot/vmlinuz-3.2.0-31-generic Found initrd image: /boot/initrd.img-3.2.0-31-generic /usr/sbin/grub-probe: Fehler: no such disk. /usr/sbin/grub-probe: Fehler: no such disk. Found linux image: /boot/vmlinuz-3.2.0-30-generic Found initrd image: /boot/initrd.img-3.2.0-30-generic /usr/sbin/grub-probe: Fehler: no such disk. /usr/sbin/grub-probe: Fehler: no such disk. /usr/sbin/grub-probe: Fehler: no such disk. done I don't know how to fix that problem. Reinstalling grub via live cd did not help.

  Read the article

• Booting Fedora guest VBox on /dev/mapper/vg0-fc17-root

  - by NevilleDNZ

  I already have the following logical volumes: host:/dev/mapper/vg0-fc17-boot (guestOS:/dev/hdb) formatted as ext4 (no partition table) host:/dev/mapper/vg0-fc17-root (guestOS:/dev/hdc) formatted as ext4 (no partition table) Do I have to create the following grub partition to boot a guest VM under VirtualBox? host:/dev/mapper/vg-fc17-mbr (guestOS:/dev/hda) with a partition table and install grub MBR here? Or is there a better way? (Maybe grub on vg0-fc17-boot?)

  Read the article

• Why did my flash drive become "read only" and (how) can I fix it?

  - by Bob

  I have a brand new flash drive (one week old) that has become marked as read only, by Windows, Kubuntu and a bootable partitioner. Why did this happen? Is it fixable? If it is, how can I fix this? The problem Firstly, this drive is new. It's certainly not been used enough to die from normal wear and tear, though I would not discount defective components. The drive itself has somehow become locked in a read only state. Windows' Disk management: Diskpart: Generic Flash Disk USB Device Disk ID: 33FA33FA Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : Yes Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No What really confuses me is Current Read-only State : Yes and Read-only : No. Attempted solutions So far, I've tried: Formatting it in Windows (in Disk management, the format options are greyed out when right clicking). DiskPart Clean (CLEAN - Clear the configuration information, or all information, off the disk.): DISKPART> clean DiskPart has encountered an error: The media is write protected. See the System Event Log for more information. There was nothing in the event log. Windows command line format >format G: Insert new disk for drive G: and press ENTER when ready... The type of the file system is FAT32. Verifying 7740M Cannot format. This volume is write protected. Windows chkdsk: see below for details Kubuntu fsck (through VirtualBox USB passthrough): see below for details Acronis True Image to format, to convert to GPT, to destroy and rebuild MBR, basically anything: failed (could not write to MBR) Details (and a nice story) Background This was a brand new, generic, 8GB flash drive I wanted to create a multiboot flash drive with. It came formatted as FAT32, though oddly a little larger than most 8 GIGAbyte flash drives I've come across. Approximately 127MB was listed as "used" by Windows. I never discovered why. The end usable space was about what I normally expect from a 8GB drive (approx 7.4 GIBIbytes). I had thrown quite a few Linux distros on, along with a copy of Hiren's. They would all boot perfectly. They were put on with YUMI. When I tried to put the Knoppix DVD on, YUMI added an odd video option to its boot comman which caused Knoppix to boot with a black screen on X. ttys 1 through 6 still worked as text only interfaces. A few days later, I took some time to take that odd video option off, making the boot command match the one that comes with Knoppix. On the attempt to boot, Knoppix reported some form of LZMA corruption. Leading up to the current issue I was thinking the Knoppix files may have been corrupted somehow, so I tried reloading it. The drive was nearly full (45MB free), so I deleted a generic ISO that also was not booting. That went fine. I then went through YUMI to 'uninstall' Knoppix, i.e. delete files and remove from the menus. The files went first, then the menus were cleared successfully. However, the free space was stuck at about 700MB, same as it was before removing Knoppix. In the old Knoppix folder, there was a 0 byte file named KNOPPIX that could not be deleted. I tried reinserting the drive to delete this file - without safely removing, if that made a difference (hey, first time for everything). Running the standard Windows chkdsk scan without /r or /f reported errors found. Running with /r just got it stuck. I decided to give fsck a shot, so I loaded up my Kubuntu VM and attached the drive to it with VirtualBox's USB 2.0 passthrough. I umounted it (/dev/sda1) and ran a fsck. There are differences between boot sector and its backup. I chose No action. It told me FATs differ and asked me to select either the first or second FAT. Whichever I selected, I got a notice of Free cluster summary wrong. If I chose Correct, it gave a list of incorrect file names. To try to fix something, at least, I ran it with the -p option. Halfway through fixing the files, the VM froze - I ended its process about ten minutes later. Cause? My next attempt was to use YUMI, again, to rebuild the whole drive. I used YUMI's built in reformat (to FAT32) option and installed a Kubuntu ISO (700MB). The format was successful, however, the extract and copy of Kubuntu (which YUMI uses a 7zip binary for) froze at about 60% done. After waiting for about fifteen minutes (longer than the 3.5GB Knoppix ISO took last time), I pulled the drive out. The drive at this point was already formatted, SYSLINUX already installed, just waiting on the unpacking of an ISO and the modifying of the boot menus. Plugging it back in, it came up as normal - however, any write action would fail. Disk management reported it as read only. On reconnect, it would come up as normal but a write operation would cause it to go read only again. After a few attempts, it started coming up as read only on insertion. Attempts to fix This is when I ran through the attempts listed above, to try and reformat it in case of a faulty format. However the inability to do so even on a bootable disk indicated something more serious is wrong. chkdsk now reports nothing is wrong, and fsck still reports MBR inconsistencies, but now always chooses first FAT automatically after telling me FATs differ. It still does the same Free cluster summary wrong afterwards. I cannot run with -p anymore because it is now marked as read only. It also managed to corrupt my VM's disk somehow on the first attempt (yes, I'm sure I chose sda, which is mapped to a 7.4GB drive - I triple checked). Thank god for snapshots? I'm just about out of ideas. To my inexperienced mind it looks like something in the drive's firmware set it to read only "permanently" somehow - is there any way to reset this? I don't particularly care about keeping data, considering I've reformatted it twice. Also, fixes that keep me in Windows are better; it reduces the risk of me accidentally nuking my main hard drive. Update 1: I pulled apart the drive out of curiosity. As you can see, there are no obvious write protect switches. There is an IC on the other side, ALCOR branded labelled AU6989HL, if that matters. If there appears to be no way to fix this, I'll probably pull out the (glued down) card and put it in a card reader to check if it's the card or the controller that died. Update 2: I've pulled the card off, Windows detects the drive as a card reader now. The contacts on the card don't appear to be used, and there are several rows of holes on the card itself. Putting it into the card reader only detects about 30MB total, RAW. It's probably either the reader incorrectly reporting the card as faulty (as if a real SD card's write protect was switched on) or a bad contact somewhere. If nothing else, I have a spare 8GB Micro SD card now... as soon as I figure out how to format it as 8GB.

  Read the article

• Exchange 2007 Standard Edition

  - by Phrontiste

  We Have : Exchange 2007 Standard Edition IBM System X3650 2 x Intel Xeon 5430 2.66 GHz Version 8.1 Build 240.6 Mailbox, Hub Transport, Client Access Role Installed on One Box Total Number of Mailboxes : 110 - 130 6 Physical Disks Disk 0,1 (68 GB) = Raid-1, OS Partition ( C: Partition) Disk 2,3 (279GB) = Raid-1, Exchange Database (First and Second Storage Groups) ( D: Partition ) Disk 4,5 (68 GB) = Raid-1, Exchange Transaction Logs ( E: Partition ) Setup: Storage Groups : D:\First Storage group\Mailbox database.edb Storage Groups : D:\Second Storage Group\Public Folder Database.edb Transaction Logs : E Partition Problem 1: On our D Partition (Mailbox Database Partition), total size is 279 GB, free space remaining is 64.7 GB, when I select the first storage group and second storage group folders and right click properties they report a size of 165 GB. Mailbox database reports a size of 157GB when right clicked Properties. where as the size displayed in the folder is 164,893,456 KB So, we are missing around 50-54 GB, there is nothing else on these drives, no page file, nothing at all. The partition housing the Transaction logs is reporting the sizes accurately. Any suggestions / fixes on the above ? Problem 2: As you may have already read in Problem 1, the size of the mailbox database is 157GB or 164GB reported; which is not recommended, a) What would you suggest we should do to divide mailboxes in storage groups on this same server ? b) How would we move mailboxes into different storage groups ? c) This is the information store size ? (Am I right in thinking that this is not recommended) d) Having multiple storage groups with one Mailbox DB in each, would that reduce the size of the Information Store? e) Any suggestions / how-to reduce the size of information store ? We didn't install this, we have inherited this - what other recommendations you can make in order to keep ourselves better prepared for any server disaster? We are backing up with Yosemite Backup on RD1000 (320GB) at the moment, which is backing up successfully, flushing the logs daily. We haven't done a test restore YET. I have tried to provide as much info as possible, please let me know if you need further info. Also, we haven't yet faced any problems in mailflow, access speeds, everything is working fine, we have two to five people accessing OWA or Outlook via vpn only. Thanks for your time to read the above - will look forward to your expert suggestions.

  Read the article

• Convert MBR to GPT - Without any OS

  - by Sourabh

  I just got a new laptop without any OS (it had FreeDOS, but not anymore). When I go to Windows Installer and try to create a new partition from un-allocated space, I don't get any Error message but the installer is unable to create the partition. At the bottom of the installer window, there's a warning which says something like, Windows cannot install on MBR *partition. On EFI systems, Windows can only install on GPT *partition How can I convert MBR to GPT without any OS?

  Read the article

• How can I export images from MS SQL Server to a file on disk?

  - by rball

  I have a User table that has all of their avatars saved in an image field. I'd like to just take that out of the database and store it as a regular file on disk. I looked around and saw some code for textcopy, but that doesn't seem to be on my machine for some reason. Here is the code I wrote up anyway. Anyone know a way to get this done? DECLARE @exec_str varchar (255) SELECT @exec_str = 'textcopy /S (local)\SQLEXPRESS' + --' /U ' + @login + --' /P ' + @password + ' /D thedatabase' + ' /T User'+ ' /C AvatarImage' + ' /F "d:\Avatars\' + User.Name + '.jpg"' + ' /O' FROM [User] WHERE UserID = 2 EXEC master..xp_cmdshell @exec_str

  Read the article

• Can I get Raid disk status by using PS?

  - by David.Chu.ca

  I have a HP server with Raid 5. Port 0 and 1 are used for data & OS mirroring. The software come with the Raid 5 is Intel Matrix Storage Manager and there is manager console as windows based api to view all the ports, including their status. Now they are all in Normal status. I am not sure if the OS/Windows has some APIs or .Net classes to access raid ports and get their status? If so, how can I use PS to get the information? Do I have to reference to the dlls provided by the Intel Matrix Storage Manager if not? Basically, I would like to write a PS script to get read status. In case any of port disk is not normal, a message will be sent out by growl protocol.

  Read the article

• How can I export images from SQL Server to a file on disk?

  - by rball

  I have a User table that has all of their avatars saved in an image field. I'd like to just take that out of the database and store it as a regular file on disk. I looked around and saw some code for textcopy, but that doesn't seem to be on my machine for some reason. Here is the code I wrote up anyway. Anyone know a way to get this done? DECLARE @exec_str varchar (255) SELECT @exec_str = 'textcopy /S (local)\SQLEXPRESS' + --' /U ' + @login + --' /P ' + @password + ' /D thedatabase' + ' /T User'+ ' /C AvatarImage' + ' /F "d:\Avatars\' + User.Name + '.jpg"' + ' /O' FROM [User] WHERE UserID = 2 EXEC master..xp_cmdshell @exec_str

  Read the article

• How to sanely read and dump structs to disk when some fields are pointers?

  - by bp

  Hello, I'm writing a FUSE plugin in C. I'm keeping track of data structures in the filesystem through structs like: typedef struct { block_number_t inode; filename_t filename; //char[SOME_SIZE] some_other_field_t other_field; } fs_directory_table_item_t; Obviously, I have to read (write) these structs from (to) disk at some point. I could treat the struct as a sequence of bytes and do something like this: read(disk_fd, directory_table_item, sizeof(fs_directory_table_item_t)); ...except that cannot possibly work as filename is actually a pointer to the char array. I'd really like to avoid having to write code like: read(disk_df, *directory_table_item.inode, sizeof(block_number_t)); read(disk_df, directory_table_item.filename, sizeof(filename_t)); read(disk_df, *directory_table_item.other_field, sizeof(some_other_field_t)); ...for each struct in the code, because I'd have to replicate code and changes in no less than three different places (definition, reading, writing). Any DRYer but still maintainable ideas?

  Read the article

• Import module stored in a cStringIO data structure vs. physical disk file

  - by Malcolm

  Is there a way to import a Python module stored in a cStringIO data structure vs. physical disk file? It looks like "imp.load_compiled(name, pathname[, file])" is what I need, but the description of this method (and similar methods) has the following disclaimer: Quote: "The file argument is the byte-compiled code file, open for reading in binary mode, from the beginning. It must currently be a real file object, not a user-defined class emulating a file." [1] I tried using a cStringIO object vs. a real file object, but the help documentation is correct - only a real file object can be used. Any ideas on why these modules would impose such a restriction or is this just an historical artifact? Are there any techniques I can use to avoid this physical file requirement? Thanks, Malcolm [1] http://docs.python.org/library/imp.html#imp.load_module

  Read the article

• All things equal what is the fastest way to output data to disk in C++?

  - by user260197

  I am running simulation code that is largely bound by CPU speed. I am not interested in pushing data in/out to a user interface, simply saving it to disk as it is computed. What would be the fastest solution that would reduce overhead? iostreams? printf? I have previously read that printf is faster. Will this depend on my code and is it impossible to get an answer without profiling? Edit: Output data needs to be in text format, whether tab or comma separated. This will require formatting, precision, etc. Running in Windows.

  Read the article

• Vista install works on one computer, but bluescreens another (on which Vista is known to work)

  - by Ken

  I hope my explanations make some sense -- please ask for clarification if they don't. I had a computer running Windows Vista (Ultimate, 64-bit). All was well! Then one day there was a nasty power surge at the office, and it died. (We didn't have surge protectors at the office, unfortunately. I assumed our lines were conditioned elsewhere, or was not an issue here. Oops.) After some testing, it was determined that the PSU, motherboard, and RAM were bad. While waiting for new hardware to arrive, I put my hard disk in a spare PC which had identical parts (mobo/CPU/RAM/PSU/video). Everything worked perfectly. The only way I could even tell it wasn't my computer is because Vista asked to re-activate itself with the new hardware, which worked fine, too. So the hard disk seems OK. Then the new parts arrived. The old motherboard model is no longer manufactured, so it's a new one with the same CPU/RAM/videocard/etc. slots. The PSU is also new, while the RAM I'm using is from the spare PC mentioned above. When I put it together and tried booting with my old hard disk, it starts to boot Windows, and then (fairly early in the process) gives a bluescreen and immediately reboots (so I can't see whatever the bluescreen is trying to tell me). I tried "safe mode", which also bluescreened. I tried booting the Vista DVD and running the repair utility, which found a Vista install, confirmed that it would not boot, and, eventually, declared that it was unable to repair it. I installed Vista fresh on a new hard disk, with the new mobo/etc., and it works perfectly. (That's what I'm running now.) I've also booted a Linux CD here, which ran great, and I've run Memtest86+ for a while, which found no errors. So all the hardware apart from the old hard disk seems OK, too. I don't think the problem is with my old Vista hard disk, since I used that with another mobo/CPU just fine. I don't think it's any other part of the new hardware, since I'm able to use it (and test it) with no trouble. It's just the combination of my old Vista install plus the new PC hardware that's not happy. I can get my data off my old hard disk and onto my new hard disk, and reinstall my apps, but it would be nice if I could fix things so I could continue to use my old hard disk as before. The latest hypothesis I've heard is that Vista had trouble with the new hardware (i.e., motherboard), but we have no idea what to do about that (except Safe Mode, which didn't work). Suggestions? Hypotheses for what's not right about this combination of Vista install and motherboard? Thanks!

  Read the article

• What disk image should I use with VirtualBox, VDI, VMDK, VHD or HDD?

  - by Sorin Sbarnea

  Latest versions of VirtualBox supports several formats for virtual disks, but they forgot to provide a comparison between them. VDI VMDK VHD HDD Now, I am interested about a recommendation or comparison that considers the following: be able to use dynamic sizing be able to have snapshots be able to move my virtual machine to another OS or even another free virtualization solution with minimal effort (probably something that would run fine on Ubuntu). performance

  Read the article

• Can I change the file system on the OS partition on Server 2008 R2?

  - by KCotreau

  I have a client using R1Soft Continuous Data Protection backup, and two of the Server 2008 R2 boxes were erroring out with these errors: Unable to obtain NTFS volume data for device '\\?\Volume{f612849e-7125-11e0-8772-806e6f6e6963}': Incorrect function. Unable to discover information for filesytem volume '\\?\Volume{f612849e-7125-11e0-8772-806e6f6e6963}'; Unable to obtain NTFS volume So I backed up all the registry entries with this, {f612849e-7125-11e0-8772-806e6f6e6963}, in it, and deleted them based on some VERY sparse info from R1Soft. I then decided to restore them before I rebooted, and do a system state backup first using MS backup, and even it errored out saying that there were FAT32 partitions. This was a major clue as the only two computers with problems had these FAT32 partitions. I figured if MS backup can't backup something, any other program is likely to have problems. Also, now that I realized the servers had FAT32 partitions on them, the error referencing NTFS takes on more weight. The partitions on both servers have the label "OS", but on one of the computers, it is given a letter, but on the other not. So I am thinking if I just convert the file systems from FAT32 to NTFS, it may solve the backup problem. So the question is this: Can I just convert those partitions, and does anyone have any concrete knowledge of any major downsides, like the servers not coming back up (of course, I would do one at a time)? My thinking is that the answer is probably at least 95% no, but they are production servers, so I wanted to get some second opinions.

  Read the article

• Dell OpenManage Causing Periodic Slowness

  - by Zorlack

  Today we diagnosed the cause of a Periodic slowness issue: see here. Dell OpenManage Server Administrator seems to have been causing hourly slowness. It would occasionally peg one of the CPUs for upwards of two minutes. Disabling it drastically improved the performance of the SQL Server. The server hardware: Dell R710 Dual Quad Core 2.9GHz Processors 96GB Memory 2 Disk RAID 1 SAS System Disk (Internal) 4 Disk RAID 10 SAS Log Disk (Internal) 14 Disk RAID 10 SAS Data Disk (External DAS MD1000) Windows 2008 Enterprise R2 x64 We installed the OS using Dell OpenManage Server Assistant, so I assume that it was correctly configured. For now we have disabled OMSA to alleviate the performance issues it was causing, but I'd like to be able to re-enable it. Has anyone had a similar experience that can shed a little light on the nature of this problem?

  Read the article

• Real server, Multiple IP Addresses, HyperV Virtual Server, How to partition IPs across real and Virtual NICs

  - by Steven_W

  This is a slightly difficult problem to explain without same basic background information - I'll try and refine the question later as necessary Originally, I have a single hosted server (Win 2008R2) with the following range of 8 IP addresses. - Single NIC - IP: x.x.128.72 -> x.x.128.79 - Subnet: x.x.255.192 - GW: x.x.128.65 After installing Hyper-V and setting up a single virtual server on the same box, I then wanted to assign one of the IP addresses to the virtual server, leaving everything else running normally. -- Firstly, I tried using the "External" network, but (even after setting IPs on the "Virtual Adapter" similar to Here but struggled to get networking running at all. I needed to keep the server running (otherwise I would have spent more time pursuing this approach) Q1 ... Was this a sensible thing to do ? Should I have carried on down this route ? -- I then decided to try different approach - Set the HyperV network to "Internal" (visible to Management OS) - Physical NIC - IP: x.x.128.72 -> x.x.128.75 - Subnet: x.x.255.192 - GW: x.x.128.65 - Virtual NIC - IP: x.x.128.78 - Subnet: x.x.255.252 - GW: x.x.128.72 ... { The same as the IP of the physical NIC ) - Virtual OS-NIC - IP: x.x.128.77 - Subnet: x.x.255.252 - GW: x.x.128.78 ... { The same as the IP of the host virtual-NIC ) -- Surprisingly enough, this approach actually worked, and I was able to connect from all the following: - Internet to/from physical NIC (x.x.128.72) - physical NIC (x.x.128.72) to virtual-OS-NIC (x.x.128.77) e.g. testing via ping + FTP - Internet to/from virtual-OS-NIC (x.x.128.72) -- The problem I have is that this approach seems to only last for a short while (a few hours). After this time, it seems that I lose the ability to connect from Virtual-OS-NIC to/from the internet (but I can still connect from the host-OS to the virtual-OS and from the host-OS to the internet) I have re-tested this a couple of times with the same results ... I leave the server on for a few hours (e.g. overnight), and when I come back in the morning, the Virtual-OS loses the ability to route to the internet -- I'm not quite sure what to look at next (or whether I'm going about this completely the wrong way ) One "possible relevant item" is that the host-OS is also running RRAS (Routing and Remote Access), but this is only to run a simple VPN -- Q2 - Wheat should I be looking at next ? (Any good references / recommendations of what to try) Would appreciate any thoughts or comments (even if you tell me I'm going about this the wrong way)

  Read the article

• All Xen domU LVM volumes corrupt after reboot

  - by zcs

  I'm running a Debian Squeeze dom0, and after rebooting it all 7 of my domUs have data corruption. Each is setup as ext3 partition directly on a separate lvm2 volume. None of the lvm volumes will mount; all have bad superblocks. I've tried e2fsck with each superblock to no avail. What else can I try? Each domU has two LVM volumes connected to it, one for the disk and one for swap. The disk is mounted at root, formatted as a normal ext3 partition as a xen-blk device. The volumes are never mounted outside of the guest OS. I'm running Ubuntu 11.04 using the instructions here. I'm not sure that they didn't shutdown properly, all I know is they were corrupt after I issues a clean 'reboot' on the dom0. Here's a sample Xen config file; the rest are the same except for name, vcpus, memory, vif and disk. name = 'load1' vcpus = 2 memory = 512 vif = ['bridge=prbr0', 'bridge=eth0'] disk = ['phy:/dev/VolGroup00/load1-disk,xvda,w','phy:/dev/VolGroup00/load1-swap,xvdb,w'] #============================================================================ # Debian Installer specific variables def check_bool(name, value): value = str(value).lower() if value in ('t', 'tr', 'tru', 'true'): return True return False global var_check_with_default def var_check_with_default(default, var, val): if val: return val return default xm_vars.var('install', use='Install Debian, default: false', check=check_bool) xm_vars.var("install-method", use='Installation method to use "cdrom" or "network" (default: network)', check=lambda var, val: var_check_with_default('network', var, val)) # install-method == "network" xm_vars.var("install-mirror", use='Debian mirror to install from (default: http://archive.ubuntu.com/ubuntu)', check=lambda var, val: var_check_with_default('http://archive.ubuntu.com/ubuntu', var, val)) xm_vars.var("install-suite", use='Debian suite to install (default: natty)', check=lambda var, val: var_check_with_default('natty', var, val)) # install-method == "cdrom" xm_vars.var("install-media", use='Installation media to use (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-cdrom-device", use='Installation media to use (default: xvdd)', check=lambda var, val: var_check_with_default('xvdd', var, val)) # Common options xm_vars.var("install-arch", use='Debian mirror to install from (default: amd64)', check=lambda var, val: var_check_with_default('amd64', var, val)) xm_vars.var("install-extra", use='Extra command line options (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-installer", use='Debian installer to use (default: network uses install-mirror; cdrom uses /install.ARCH)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-kernel", use='Debian installer kernel to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-ramdisk", use='Debian installer ramdisk to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.check() if not xm_vars.env.get('install'): bootloader="/usr/sbin/pygrub" elif xm_vars.env['install-method'] == "network": import os.path print "Install Mirror: %s" % xm_vars.env['install-mirror'] print "Install Suite: %s" % xm_vars.env['install-suite'] if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = xm_vars.env['install-mirror']+"/dists/"+xm_vars.env['install-suite'] + \ "/main/installer-"+xm_vars.env['install-arch']+"/current/images" print "Installer: %s" % installer print print "WARNING: Installer kernel and ramdisk are not authenticated." print if xm_vars.env.get('install-kernel'): kernelurl = xm_vars.env['install-kernel'] else: kernelurl = installer + "/netboot/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskurl = xm_vars.env['install-ramdisk'] else: ramdiskurl = installer + "/netboot/xen/initrd.gz" import urllib class MyUrlOpener(urllib.FancyURLopener): def http_error_default(self, req, fp, code, msg, hdrs): raise IOError("%s %s" % (code, msg)) urlopener = MyUrlOpener() try: print "Fetching %s" % kernelurl kernel, _ = urlopener.retrieve(kernelurl) print "Fetching %s" % ramdiskurl ramdisk, _ = urlopener.retrieve(ramdiskurl) except IOError, _: raise elif xm_vars.env['install-method'] == "cdrom": arch_path = { 'i386': "/install.386", 'amd64': "/install.amd" } if xm_vars.env['install-media']: print "Install Media: %s" % xm_vars.env['install-media'] else: raise OptionError("No installation media given.") if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = arch_path[xm_vars.env['install-arch']] print "Installer: %s" % installer if xm_vars.env.get('install-kernel'): kernelpath = xm_vars.env['install-kernel'] else: kernelpath = installer + "/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskpath = xm_vars.env['install-ramdisk'] else: ramdiskpath = installer + "/xen/initrd.gz" disk.insert(0, 'file:%s,%s:cdrom,r' % (xm_vars.env['install-media'], xm_vars.env['install-cdrom-device'])) bootloader="/usr/sbin/pygrub" bootargs="--kernel=%s --ramdisk=%s" % (kernelpath, ramdiskpath) print "From CD" else: print "WARNING: Unknown install-method: %s." % xm_vars.env['install-method'] if xm_vars.env.get('install'): # Figure out command line if xm_vars.env['install-extra']: extras=[xm_vars.env['install-extra']] else: extras=[] # Reboot will just restart the installer since this file is not # reparsed, so halt and restart that way. extras.append("debian-installer/exit/always_halt=true") extras.append("--") extras.append("quiet") console="hvc0" try: if len(vfb) >= 1: console="tty0" except NameError, e: pass extras.append("console="+ console) extra = str.join(" ", extras) print "command line is \"%s\"" % extra root There are two LVM logical volumes connected to each VM. Here's the fdisk -l output for the disk volume: Disk /dev/VolGroup00/VMNAME-disk: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00029c01 Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-disk1 1 1045 8386560 83 Linux And the swap volume: Disk /dev/VolGroup00/VMNAME-swap: 536 MB, 536870912 bytes 37 heads, 35 sectors/track, 809 cylinders Units = cylinders of 1295 * 512 = 663040 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004faae Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-swap1 2 809 522240 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(1, 21, 19) Partition 1 has different physical/logical endings: phys=(65, 36, 35) logical=(808, 4, 28)

  Read the article

• Copy File Contiguously to Disk from OSX/Unix/Linux to FAT32 FS?

  - by alharaka

  So the Sysinternals guys have that cool contig.exe utility that allows me ensure a file is contiguous. I need to copy overs ISO files to a FAT32 USB flash key. Grub4DOS requires the files be continuous, but I do not have Windows access at the moment. Is there a way to copy a file so it is contiguous on the target drive, or a tool like the aforementioned that will make an existing file contiguous. Again, I need it on FAT32, and there lies the rub.

  Read the article

• Iomega Home Media Network Hard Drive: Accesing the data in the disk?

  - by JJarava

  Hi all! I have an Iomega Home Media Network Hard Drive, 1TB, and lately I can't access the data on the drive. The shares (both built-in and created by me) are there, the security works, but when trying to access the data I get a "The network path was not found" message which is worrying, to say the least. I'd like to know if there is a way to get the data off the disks somehow, as some of the data in the drive (ie, pictures and videos of my 1.5 yrs old son) is hard if not impossible to find otherwise. Thanks a lot Javier

  Read the article

• Is a "failed" RAID 5 disk really no good?

  - by GregH

  This is my first venture in to setting up RAID on my home system. After installing 3 x 1TB drives in RAID 5, everything was running well for about 10 days. Then, the Intel Rapid Storage Technology software that monitors the disks and RAID on my system, told me that I had a failed drive. I marked the drive as good, and the array rebuilt. Then a day or so later I got a notification again, that the drive failed. I'm just wondering if this drive really is no good or if there is something I can do to get it working again? Or, do I just need to return it to the store where I bought it and get a replacement?

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >