Search Results

Search found 5298 results on 212 pages for 'automated deploy'.

Page 123/212 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• Multicasting Windows 7 Image

  - by LawnChairSkank

  I am trying to deploy some new machines with windows 7 for the first time in our computer labs. We used to use third party imaging software and then run sysprep after the image was copied(XP), but it seems you can't go that route with windows 7. We set up a new imaging server with the windows system image manager, but when we try to multicast the image it pretty much takes down our whole staff and faculty network. I heard you can turn on a multicast feature on our cisco switches to help with the issue, but that it also slows the switches to a crawl. Another idea we have tried was pulling the the computer lab switch off the main network and plugging the imaging server directly into the computer lab switch so the multicast doesn't take down our network, but it doesn't seem to work without being able to hit a domain controller. Is there a way to multicast without taking out the network? I feel like I am missing something... Thanks in advance

  Read the article

• IIS 7 throws 401 responses on application whose physical directory has been shared

  - by tonyellard

  I have an IIS 7, Windows Server 2008 R2 box with a relatively fresh install. I've deployed a .NET 2.0 application using windows autentication to the server, and from the default website, added it as an application. I updated the IIS authentication to enable Windows Authentication. When I went to share out the physical directory for the application so that a developer could deploy updates, the users began to receive 401 errors. I can reliably recreate the issue by sharing out the directory of any newly created application. The IIS user has the necessary read/write access to the directory. What do I need to do to keep web users from receiving 401's while at the same time allowing this developer to have access to the physical directory for deployments? Thanks in advance!

  Read the article

• How to make nginx only respond to one domain?

  - by larryzhao

  I am pretty new to nginx, I host my rails application on nginx+passenger. I want my website to be accessible to only one domain. So I set my nginx conf like the following: server { listen 80; server_name mydomain.com www.mydomain.com; root /var/deploy/myapp/current/public; passenger_enabled on; location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires 1y; add_header Cache-Control public; } } I specify the server_name directive, but still, it answers anything which points to this IP and I could see that in the access.log that it answers to other domain names. Is there anything I am doing wrong?

  Read the article

• Deploying a Windows 7 image, which way is the fastest?

  - by MatF

  I captured an image of a basic Windows 7 installation with some modifications using imagex. Before the image was captured, I ran sysprep generalizing and selecting to enter OOBE after it's done. Which way would be the fastest to deploy that image again? Using imagex /apply. Or naming the image install.wim and put it in the source folder of a normal installation (on a bootable USB device), running a normal setup afterwards. Currently I have only tried the second approach. However I just found out about the imagex way and wondered if it would be faster. Or are the even more methods that would be better?

  Read the article

• How can you enable forms scripting for outlook 2010 on Citrix servers ?

  - by Florent Courtay

  I'd like to deploy Office 2010 on Citrix servers, but i can't enable form scripting support. With outlook 2007, it was solved by adding Outlvbs.dll in the office directory, and running msiexec /i {<Outlook GUID>} ADDLOCAL=OutlookVBScript /qb But it seems this does not work anymore with Outlook 2010, I get the following error : Error 2711. An internal error has occured. (OutlookVBScript). I don't get much help from microsoft support site, as there isn't a lot of informations on office 2010 yet. Have anyone succeded in installing and using outlook 2010 with form scripting in a citrix environment ?

  Read the article

• Can I export a SharePoint list to an Excel file subdivided into separate worksheets?

  - by ccornet

  We have a SharePoint 2007 deployment which will have a substantially large document library. My client wants the ability to export this library to an Excel spreadsheet, but specifically wants the ability to divide the spreadsheet into several worksheets based on a specific field. Is this possible to accomplish in WSS 3.0, through the object model or otherwise? There is a out-of-the-box Export to Spreadsheet, but it does not appear to support automated subdivision of the list items into separate worksheets. I do not know if Excel Services that come with MOSS are capable of it, but we do not have MOSS so we cannot consider it an option for now.

  Read the article

• Any web interface to show deployments history with mcollective?

  - by Jason

  I'm using mcollective & puppet for deployments. I would like to know if there is any user interface which allows me to choose a specific package/version and deploy and any user interface i can already use which allows me to show the deployments history and their status. (I saw that glu has a nice user interface i'm looking for something like it, http://linkedin.github.com/glu/docs/latest/html/tutorial.html ) I wondered if i could use glu (so that i can get their deployment history gui if they have a good one...) with mcollective but from what i understand they are parallel frameworks.

  Read the article

• PHP can be exclusively accessed by SWF

  - by brett

  I'm not sure how to describe this, but basically I have a PHP class file: class HelloHello { public function getSomeData($input_parameter){ // code to retrieve data from the database } public function deleteSomeData($input_parameter){ // code to delete data from the database } } This class is on the server and is part of the backend that connects with a database, and it's meant to be accessed by the frontend SWF only (not to be directly accessed). I've setup Flex to read this class and access it. But how do I make sure that someone doesn't develop a script that can call this php file directly and access its methods? For example using a script to add data in a fast automated way, or use the delete method directly, ouch. Is this a legitimate concern, or this can't be done?

  Read the article

• Perform manual test, automate after - or never?

  - by dotnetdev

  In my current company, we have one tester. Having spoken to this tester, she says that in testing, before implementing any automation systems, the scripts (steps to take) are manually written and performed (performed at least once). Is this the way things work in testing? To make me laugh, this has been done in this case, yet no automation. It makes me laugh to see the lead tester perform loads of different combinations of usernames and passwords for a login form (which she is not overly keen on having automated) when I could easily automate that (but politics in the company won't allow that). This doesn't seem like the environment where a junior tester (not me, I'm a SDET) cannot learn anything. Thanks

  Read the article

• Devising a test strategy

  - by Simon Callan

  As part of a new job, I have to devise and implement a complete test strategy for the companies new product. So far, all I really know about it is that it is written in C++, uses an SQL database and has a web API which is used by a browser client written using GWT. As far as I know, there isn't much of an existing strategy, except for using Python scripts to test the web API. I need to develop and implement a suitable strategy for unit, system, regression and release testing, preferably a fully automated one. I'm looking for good references for : Devising the complete test strategy. Testing the web API. Testing the GWT based application. Unit testing C++ code. In addition, any suitable tools would be appreciate

  Read the article

• 389 DS Achitecture for Multiple Sites

  - by Kyle Flavin

  I'm looking to deploy 389 Directory in my environment to replace an existing iPlanet installation. I would be using it primarily to store user account data for authentication purposes. I have two physically separate data centers that I would like to share the same directory tree. My initial thinking is to setup 389 DS as follows: -A Master/Consumer in DataCenter A -A Master/Consumer in DataCenter B -Replication agreement between both masters, to mirror the directory tree in both environments. Does this sound like a reasonable approach? Is there a better way to do it? (ie: four masters?) Is there documentation for best practices when setting up 389 DS in situations such as this? Thanks.

  Read the article

• Application_End() cannot access cache through HttpContext.Current.Cache[key]

  - by Carl J.

  I want to be able to maintain certain objects between application restarts. To do that, I want to write specific cached items out to disk in Global.asax Application_End() function and re-load them back on Application_Start(). I currently have a cache helper class, which uses the following method to return the cached value: return HttpContext.Current.Cache[key]; Problem: during Application_End(), HttpContext.Current is null since there is no web request (it's an automated cleanup procedure) - therefore, I cannot access .Cache[] to retrieve any of the items to save to disk. Question: how can I access the cache items during Application_End()?

  Read the article

• mysql error code 13 on windows xampp caused by lower case table names = 0

  - by user127379

  I can import an sql (from test linux server mysql) file if the lower case setting is removed. But then the table names are lower case and the web site doesn't work. Originally it was working (my.ini with the lower case settings), I then exported to a linux server, it was working there. Now importing back to my windows (xampp setup) fails. After wild goose chase looking at disks and permissions, I found that if I remove the lower_case_table_names=0, the import works! But I need the case sensitive command so that I can deploy on the linux server.

  Read the article

• Is a class that is hard to unit test badly designed?

  - by Extrakun

  I am now doing unit testing on an application which was written over the year, before I started to do unit-testing diligently. I realized that the classes I wrote are hard to unit test, for the following reasons: Relies on loading data from database. Which means I have to setup a row in the table just to run the unit test (and I am not testing database capabilities). Requires a lot of other external classes just to get the class I am testing to its initial state. On the whole, there don't seem to be anything wrong with the design except that it is too tightly coupled (which by itself is a bad thing). I figure that if I have written automated test cases with each of the class, hence ensuring that I don't heap extra dependencies or coupling for the class to work, the class might be better designed. Does this reason holds water? What are your experiences?

  Read the article

• FTP proxy that translates from passive to active

  - by Jan Aagaard

  Is it possible to install a proxy server that will transform passive ftp to active ftp? Details of my problem: I would like to deploy my web sites using Visual Studio's built in publish web site function. The problem is that my web hotel only supports active ftp, and unfortunately Visual Studio 2010 has a bug, so the publish function only works with passive ftp. My idear is to install a tiny local ftp proxy, that is able to transform passive ftp mode to active mode. I would then enter localhost as the publish server in Visual Studio, and the proxy would do the actual uploading of the files to my web hotel. Visual Studio bug report: Unable to publish website to FTP server that doesn't allow passive mode.

  Read the article

• Gitolite and Gitlab - How the `www-data` user can checkout?

  - by mblaettermann

  I have just installed Gitolite and Gitlab and I am very happy with it. Everything works fine so far. I can create repos, push to them, clone them on other clients on the network. Great! But now I wanted to do some post-receive hooks. I.e. when I push to some repo, this repo should be checked out on the server in the /var/www/repos directory. I did this with Gitlabs Deploy Hooks and this Endpoint-Script. The problem is that the scripts are run under the user "www-data" which has no access to gitlab/gitolite. How do I change this? I need to be able to checkout repos with www-data user and using git@server/repo.git syntax.

  Read the article

• Is there a way to control two instantiated systemd services as a single unit?

  - by rascalking

  I've got a couple python web services I'm trying to run on a Fedora 15 box. They're being run by paster, and the only difference in starting them is the config file they read. This seems like a good fit for systemd's instantiated services, but I'd like to be able to control them as a single unit. A systemd target that requires both services seems like the way to approach that. Starting the target does start both services, but stopping the target leaves them running. Here's the service file: [Unit] Description=AUI Instance on Port %i After=syslog.target [Service] WorkingDirectory=/usr/local/share/aui ExecStart=/opt/cogo/bin/paster serve --log-file=/var/log/aui/%i deploy-%i.ini Restart=always RestartSec=2 User=aui Group=aui [Install] WantedBy=multi-user.target And here's the target file: [Unit] Description=AUI [email protected] [email protected] After=syslog.target [Install] WantedBy=multi-user.target Is this kind of grouping even possible with systemd?

  Read the article

• Beginner's resources/introductions to classification algorithms.

  - by Dirk

  Hi, everybody. I am entirely new to the topic of classification algorithms, and need a few good pointers about where to start some "serious reading". I am right now in the process of finding out, whether machine learning and automated classification algorithms could be a worthwhile thing to add to some application of mine. I already scanned through "How to Solve It: Modern heuristics" by Z. Michalewicz and D. Fogel (in particular, the chapters about linear classifiers using neuronal networks), and on the practical side, I am currently looking through the WEKA toolkit source code. My next (planned) step would be to dive into the realm of Bayesian classification algorithms. Unfortunately, I am lacking a serious theoretical foundation in this area (let alone, having used it in any way as of yet), so any hints at where to look next would be appreciated; in particular, a good introduction of available classification algorithms would be helpful. Being more a craftsman and less a theoretician, the more practical, the better... Hints, anyone?

  Read the article

• Simple NAT router for ESX

  - by Evan M.

  Hi Guys, I'm looking for a simple virtual appliance that I can deploy to my ESX environment to use as a virtual NAT router / firewall to create an isolated network that I can easily give internet access too. Basic setup: ESX Host, has 2 vswitches configured: 1 is connected to the physical LAN, the other is isolated. I need an appliance that I can add 2 vNICs to, and attach one to the isolated vSwitch, the other to the LAN, to give the isolated network outbound access (so it can reach the internet). Anyone have an appliance that I can setup quickly to do so? Thanks.

  Read the article

• Adding SSL to Heroku site post launch

  - by dineth

  I have a rails API that I want to deploy on Heroku. $20/month for a SSL site on heroku is a little steep given I am not earning anything out of this app yet. I am after advice and wondering if it is possible to add SSL sometime in the future? This is for a iOS app that I'm writing. Basically the idea would be that I continue to use https://myapp.heroku.com through their piggyback SSL. Once I get some cash in, I want to transition to using https://www.myapp.com. At this point the API would still need to work for app users who haven't upgraded to a new version of the app that points to the new domain. Anyone know if this is possible? Would both URLs continue to work? My gut feeling tells me this is not possible. Any advice would help. Thanks!

  Read the article

• Concerns with SoapUI Pro when Updating Web Services

  - by Plenoge

  This may unfortunately be a very open-ended question, but a coworker of mine has shared concerns about using SoapUI Pro as our automated regression testing tool primarily on the basis that seemingly trivial WSDL changes can cause headaches for the QA crew. My coworker's particularly concerned that if we update the WSDL, even with a name change, we'll need to touch and update each existing test. As I understand it SoapUI Pro offers a refactoring tool to handle this for you. What are your experiences with SoapUI Pro and updating your web services? Am I missing something?

  Read the article

• process running on login: can't find in AD or login batch scripts

  - by tombull89

  Hallo, I'm trying to deploy some classroom control software (NetSupport School) to some of the machines on our network but for some reason when you log off and restart the computer any user who logs on ends up re-installing the software while logging on. I spent two hours on the phone to the complanys support and we eventually nailed it down to most likely a setting in Active Directory or in the login.bat (drive mapping and settings) but we can't find anything in those that would say "run this installer at logon". Is there anywhere else on the system that would set something like this? Server 2003/XP. Ta!

  Read the article

• WPF component for 2D tree diagram

  - by pdm2011

  I'm looking for a well-documented, supported WPF component that provides an API for visualisation of 2D tree diagrams. Ideally something easy to use, customisable (i.e. supports various flavours of nodes and splines) and preferably with automated layout control. Tools that look good so far are GoXam (http://www.nwoods.com/components/silverlight-wpf/goxam-overview.htm) and yFiles WPF (http://www.yworks.com/en/products_yfileswpf_about.html). Just wondering if anyone has experience with either of these, or can recommend an alternative? Thanks!

  Read the article

• Windows Task Scheduler

  - by Zulakis

  i am trying to deploy a auto-starting program with Administrator Priviliges on our XP-SP1-machines. For this, i am using the Windows Task Scheduler. Since most of our machines get deployed by using a PXE-imaging-system, the Task fails because the Administrator user entered is for example r126/Administrator. If i only enter Administrator then it automatically changes to machinename/Administrator. Since the machinenames are automatically changes by the imaging-system, the tasks fail run. Any ideas on how to fix that?

  Read the article

• Are there ways to write php/python code to run as hooks in the Apache Request Processing pipeline?

  - by SB

  Does anybody know of any modules that provide the functionality to write python or PHP code to run as hooks in the Apache request processing pipeline? For instance, mod_perl lets me write PerlModules, which can contain handlers for the header parsing phase, content delivery, and even filters. I would like to do something similar in other scripting languages. I could write it in C, but the goal is to deploy a module that would work across a number of systems. If I deliver it as binary in C, then it would require 64/32-bit versions and some other issues. With perl, I can just require certain modules installed and mod_perl2.

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >