Search Results

Search found 54358 results on 2175 pages for 'error recovery'.

Page 123/2175 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

  • How do I prevent having to log in on 3 separate prompts every time I start my machine?

    - by JC
    Ubuntu 11.04 Natty Narwhal, Ubuntu Classic desktop Each time I start my machine, I have to log in 3 times. I spent a week in IRCFreenode#ubuntu and got nothing but condescension. I've searched on the official Ubuntu fora for similar problems, tried every recommendation, and still get 3 login screens. As a workaround, I have reset login such that I get a login screen at startup, which I'd prefer not to get since this machine is accessible by no one but me, physically. I have gone into System Preferences Passwords and Encryption Keys, set first 'Passwords: default' to 'Default' and unlocked it, and unlocked the 'Passwords: login' key, too. Next, since that changed nothing, I set 'Passwords: login' to 'Default', and checked to make sure it was still unlocked. Again, no change, still get 3 login prompts at startup. I've checked twice to insure that I am the owner of the files; I am. At the suggestion of several people in #ubuntu, I've deleted first one, then the other password key in 'Passwords and Encryption Keys'. Still get 3 login prompts. I changed from the Unity desktop to Ubuntu Classic. While that didn't fix the above problem, it is a much more elegant desktop than Unity, and I'll keep it. From what I've read, this seems to be a Seahorse issue, but beyond that, no one seems to have a solution that works. I'm lost. This shouldn't be this difficult or annoying. I'm trying to help our local Old Time music collective get their machines switched over to Ubuntu in order to save them some money which they can use to promote their DRM-free music. But from what I've seen of Ubuntu so far on my own machine, I can't really recommend that they make this switch. I hope to be proved wrong on that point. But as it stands, if I was out of town or out of country and they ran into a problem, they'd have no way of fixing it as they're all less experienced than even I am. I'm not trying to cast aspersions on Ubuntu or Linux, but it seems pretty clear that KNOWLEDGEABLE, HELPFUL support for Ubuntu is lacking barring any desire on the problem-experiencing-user's part to avoid condescension. Having worked with, and run, several non-profits over the past 20 years, I know that getting volunteers to act professionally can be like herding cats. But an organization's reputation can be denigrated by sarcastic behaviors on the part of those who serve, effectively, as its public face. Thank you all for your help and support. Now...does anyone have a solution to my problem?

    Read the article

  • Release upgrade crashes with "W:Failed to fetch http://host/debian/dists/oneiric/Release.gpg"

    - by Nolan Dillard
    My update manager told me that it has not checked for updates in the past 18 days, so I clicked the "check" button. It works just fine until a certain point where it says "Downloading release". The loading bar moves across the screen for a while on that message, then it just stops and says to check my Internet connection. I am fairly certain that my Internet is fine, as I can do anything else that I have tried, including installing software over the Internet. I clicked on "Details" and this is what turned up: Log

    Read the article

  • How does one handle an incorrect resource file?

    - by AedonEtLIRA
    I'm starting the parser that will handle one of the key features of my app and realizing exactly who easy it would be for me to screw up a resource file that is provided to the application. For example, a simple resource that I provide to my app is a JSON file that contains an entity layout (name, fascia, location etc...). It would be easy for me to leave out the name of the entity or misspell the JSON key. Obviously catastrophic failures during parsing are to be handled in a try/catch, but how would subtle failures (such as a dyslexic spelling of name) be handled?

    Read the article

  • Problem installing Oracle 10g Express edition

    - by abhi
    I have installed Oracle 10g Express edition in Ubuntu 10.10 and it doesn't show or ask to give my password during installation. When I click on "start database" it gave the warning "Operation failed, abhi is not a member of 'dba' group." and when clink on "Run SQL command line" it shows /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found When I click on "GOTO Database home page", it opens Mozilla's "Ubuntu Google search page". Can anyone help me get my Oracle to work or tell me how to remove that because it is also not getting removed. I tried all the commands that are given as suggestions by Ubuntu. Please help me because I don't want to format my Ubuntu.

    Read the article

  • Good practice or service for monitoring unhandled application errors for a small organization

    - by palto
    I'm working with multiple software with varying ways of monitoring for errors. When I make software, I usually send email with the stack trace to admins(usually me). Some customer software is monitored by a team who check that a particular batch run was successfull. Other software might not have any monitoring at all(someone will call when things go wrong horribly). Sending emails is good, except when things start going wrong, my mail gets filled fast. Also I don't want to solve the same problem in code for every software. Is there some relatively cheap and low maintenance software or practice to handle this. I want it to be cheap/low maintenance because usually I work alone or in teams of 5 or smaller. For example it would be great if errors would be aggregated so I don't get 10 000 emails when something unexpected happens... For clarification: By unhandled errors I mean Exceptions that were unhandled by application code that were propagated to Tomcat or Jboss. I don't need help with how to catch those errors. I need help with what to do with them. Is there any cloud application that I could send my errors to? Or some simple server to install? Or some library that can handle errors using configuration files. I use Java if that is any help.

    Read the article

  • 12.04 "Try Ubuntu without installing" results in graphical artifacts on MacBook

    - by ubuntukeks
    I am trying to bless my MacBookPro 5,3 (Unibody/Core2Duo/Nvidia 9400M+Nvidia 9600M GT) with Ubuntu 12.04 (already got rEFIt running), but every time I select Try Ubuntu without installing, it will lock up and always give me the same coloured graphical artifacts all over the screen. Whether I use a CD-ROM or a USB Stick, it does not change a thing. Is there anything else that can be done or am I stuck for now?

    Read the article

  • How to restore GRUB without re-installing the OS?

    - by Calixte
    A friend of mine has a Packard Bell laptop that came with Windows pre-installed. I installed Ubuntu on it and it works fine, but everytime she tried to boot Windows on it (fortunately rarely) it fails and the computer is unable to boot any OS anymore. Upon boot, the computer stops on a black screen with a GRUB Rescue prompt. Is there any way to restore GRUB without re-installing Ubuntu? (preferably an easy way as I cannot do it for her and she is not extremely computer literate) Also (but less important), is there a way to configure GRUB (or something else) so that Windows won't destroy it on every boot attempt?

    Read the article

  • Test descriptions/name, say what the test is? or what it means when it fails?

    - by xenoterracide
    The API docs for Test::More::ok is ok($got eq $expected, $test_name); right now in one of my apps I have $test_name print what the test is testing. So for example in one of my tests I have set this to 'filename exists'. What I realized after I got a bug report recently, and realized that the only time I ever see this message is when the test is failing, if the test is failing that means the file doesn't exist. In your opinion, do you think these $test_name's should say what the test means if successful? what it means if it failed? or do you think it should say something else? please explain why?

    Read the article

  • Ubuntu 12, chromium/chrome facebook not loading

    - by Grant
    this problem started with chrome, tried chromium to fix it. both have this problem, and after installed firefox no longer works with facebook. I found a threas with two fixes that work and what I need to know is how to make these fixes permanent. one is a cache permissions workaround. launching chromium from terminal with a redirect to a new self created cache in the home folder works. how can i repair the permissions issue with the cache or make a permanent change to the cache chromium uses? two, the ifconfig wlan0 mtu set to 1492, this setting doesnt seem to be perpetual after a reboot. this set of issues is I believe specific to my particular install as there isnt a huge issue from anyone else out there, i'm on a toshiba satellite laptop with a 50/50 HDD partition split with windows. This is likely causing the issue or contributing in some way but I wont run linux full time on this machine until I get these kinks a more permanent fix. Thanks in advance for any advice/answers.

    Read the article

  • what's wrong with my sitemap?

    - by cadrian
    Google Webmaster Tools says that my sitemap is in a wrong format. I don't see my mistake, I think I followed every guideline provided by Google. Can someone help me? <?xml version="1.0" encoding="UTF-8"?> <urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9"> <url> <loc>http://www.vocalcontraste.fr/</loc> </url> <url> <loc>http://www.vocalcontraste.fr/presentation/</loc> <lastmod>2012-01-30T21:49:06+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/les-concerts/</loc> <lastmod>2012-12-13T21:55:00+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/ecoutez-contraste/</loc> <lastmod>2012-07-13T18:19:45+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/repertoire/</loc> <lastmod>2012-07-13T17:30:14+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/la-presse/</loc> <lastmod>2012-07-11T08:17:48+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/recrutement/</loc> <lastmod>2012-02-01T22:22:03+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/nos-partenaires/</loc> <lastmod>2012-07-11T07:43:31+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/contactez-nous/</loc> <lastmod>2012-02-02T19:01:32+01:00</lastmod> </url> </urlset>

    Read the article

  • Problems after distribution update

    - by Avariya
    I have Ubuntu 11.10. Yesterday I make some distribution updates with Update Manager. And now I can't start my Ubuntu. Video related: http://www.youtube.com/watch?v=nn2MT9h2muQ (you need 25th sec) 1. Starting Ubuntu(output on video) 2. Black screen 3. Then permanent dark gray screen Was related problem with updating from 11.04 to 11.10. Ufter that update Ubuntu not start too and I must reinstall Ubuntu. Help me pls and ask questions if needed.

    Read the article

  • Broken Package on Update Manager

    - by Widy Graycloud
    I dont know what's wrong with my update manager.. It says that the softwares that I installed was broken. Maybe because I force shutdown my laptop, because Ubuntu wont shutdown,showing up desktop wallpaper but not title bar and launcher, but It won't shut down (+that's another bug). I've just update the broken softwares. the size is 60 to 70 MB.. But It doesn't work. Now I cannot update or install any software from Update Manager or Ubuntu Software Center. Can anybody tellme what's wrong? This is what appears when I use Update Manager I use Ubuntu Software Center, and this message appeared I chose repair and when it update the broken softwares using Ubuntu Software Center. It failed. And show up this message. The problem is I can't update or install any program from Ubuntu Software Center and Device Manager anymore. (I closed allprograms include ubuntu software center,and device manager in this case). Some one helpme? I tried to use apt-get install -f in terminal but it shows message like this: E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?

    Read the article

  • subdomain not working and added /mysubdomains/devsitename

    - by krish
    I am having a site www.example.com which working fine and I have a number of sub-domains which are working fine except one. When I gave the url subdomain.example.com the address bar showing as below subdomain.example.com --> www.subdomain.example.com/mysubdomains/devsitename It added the www and the /mysubdomain/devsitename which is my hosted directory in my server. Then it came up with the website you were looking for is unavailable. Has anyone experienced this issue? Do you know how to resolve this?

    Read the article

  • busybox initramfs prompt while attempting to install from live cd on 2nd hdd

    - by da92n
    busybox initramfs prompt while attempting to install from live cd on 2nd hdd I've created a partition in ext3 on my second hdd to intall linux however when i come to boot the CD i get directed to a busybox prompt with no other choice than help. Other topics i've read on the subject where bound to the idea ubuntu has been already installed, and that the partition needs to be just indicated or else... But since i've no ubuntu installed, neither have i any partition that ubuntu should consider like that... How can i go through that?

    Read the article

  • Is possible to write too many asserts?

    - by Lex Fridman
    I am a big fan of writing assert checks in C++ code as a way to catch cases during development that cannot possibly happen but do happen because of logic bugs in my program. This is a good practice in general. However, I've noticed that some functions I write (which are part of a complex class) have 5+ asserts which feels like it could potentially be a bad programming practice, in terms of readability and maintainability. I think it's still great, as each one requires me to think about pre- and post-conditions of functions and they really do help catch bugs. However, I just wanted to put this out there to ask if there is a better paradigms for catching logic errors in cases when a large number of checks is necessary.

    Read the article

  • creating a bootable USB stick on OS X

    - by Rob
    I'm trying to create a bootable USB stick on OS X using http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx When this finishes, I get a message in terminal saying "695+1 records in 695+1 records out 729067520 bytes transferred in 264.563662 secs (2755736 bytes/sec)" But a message pops up saying "The disk you inserted was not readable by this computer" Options are Initialize, Ignore or Eject. What am I doing wrong or omitting. (oh - complete novice)

    Read the article

  • 11.10 - Update Manager Not working

    - by Mattlinux1
    W:Failed to fetch cdrom://Ubuntu 11.10 Oneiric Ocelot - Release i386 (20111012)/dists/oneiric/main/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , W:Failed to fetch cdrom://Ubuntu 11.10 Oneiric Ocelot - Release i386 (20111012)/dists/oneiric/restricted/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , E:Some index files failed to download. They have been ignored, or old ones used instead. This happens when i hit the check button? and the updates were working before.

    Read the article

  • 'unknown filesystem' grub rescue prompt; trying to wipe drive and boot 10.10 live

    - by Patrick
    Im currently running Win7, and want to wipe the drive and install 10.10. I have 10.10 loaded on a USB thumbdrive and it sees the device in BIOS but it only reaches a screen saying; Unknown Filesystem grub rescue> Ive read several results from google and a couple here where people are trying to dual boot and i assume save the data on the drive, but i dont care about doing that, and would prefer to just wipe the drive and start fresh. What steps can i take to get the drive to a point where i can load 10.10 live and get it installed?

    Read the article

  • LiveCD not booting/can't install Ubuntu 11.04

    - by user20318
    So, i got a new laptop somedays ago and as usualy, i went formated it to install Ubuntu. Download 11.04 and burned it on my pendrive using my old laptop (running 11.04). When i tryed to boot from the LiveUSB on my new laptop, it just showed me some weird graphics and if i select any option (can't see what im selecting), it gives me a black screen and that is all. Then i tryed to boot with this LiveUSB on my old laptop, and it worked just fine ._. Burned a CD with Ubuntu 11.04 (64bits) and the problem continue. Then i tought it could be my CD Driver, since the laptop is new and all... burned a Windows 7 64 bits DVD and it worked just fine. Also, if i check the CD/Pendrive inside Windows Seven, all the files there are ok. Anyone have any idea of what can be? I found lots of questions about this, but none of them had the weird menus i'm getting ._. oohh... i also get a "prefix is not set" before the weird menu appears :S My sis specs: Intel Core i5 2400 Intel HD 3000 4gb DDR3 If anyone can help, i will be really greatfull ._.

    Read the article

  • PCManFM problems: shuts down unexpectedly, would not always start [closed]

    - by cipricus
    In Lubuntu 12.04 beta (final release in a few days). I do not remember doing something outrageous to my PCManFM but now it has has a lot of problems: "extract here" menu action wouldn't work (this problem never disappears) the program shuts without obvious reason making the desktop empty (the program can be started in run (alt-f2) but this does not alway restore the desktop) would not start sometimes from its /usr/share/applications.desktop file (or the "Aplication Launch Bar") although it starts in run (alt-f2) (the last problem is temporarily solved if the program is closed in task manager and than restarted with alt-f2) I have reinstalled it to no avail. Any ideas?

    Read the article

  • Why is 0 false?

    - by Morwenn
    This question may sound dumb, but why does 0 evaluates to false and any other [integer] value to true is most of programming languages? String comparison Since the question seems a little bit too simple, I will explain myself a little bit more: first of all, it may seem evident to any programmer, but why wouldn't there be a programming language - there may actually be, but not any I used - where 0 evaluates to true and all the other [integer] values to false? That one remark may seem random, but I have a few examples where it may have been a good idea. First of all, let's take the example of strings three-way comparison, I will take C's strcmp as example: any programmer trying C as his first language may be tempted to write the following code: if (strcmp(str1, str2)) { // Do something... } Since strcmp returns 0 which evaluates to false when the strings are equal, what the beginning programmer tried to do fails miserably and he generally does not understand why at first. Had 0 evaluated to true instead, this function could have been used in its most simple expression - the one above - when comparing for equality, and the proper checks for -1 and 1 would have been done only when needed. We would have considered the return type as bool (in our minds I mean) most of the time. Moreover, let's introduce a new type, sign, that just takes values -1, 0 and 1. That can be pretty handy. Imagine there is a spaceship operator in C++ and we want it for std::string (well, there already is the compare function, but spaceship operator is more fun). The declaration would currently be the following one: sign operator<=>(const std::string& lhs, const std::string& rhs); Had 0 been evaluated to true, the spaceship operator wouldn't even exist, and we could have declared operator== that way: sign operator==(const std::string& lhs, const std::string& rhs); This operator== would have handled three-way comparison at once, and could still be used to perform the following check while still being able to check which string is lexicographically superior to the other when needed: if (str1 == str2) { // Do something... } Old errors handling We now have exceptions, so this part only applies to the old languages where no such thing exist (C for example). If we look at C's standard library (and POSIX one too), we can see for sure that maaaaany functions return 0 when successful and any integer otherwise. I have sadly seen some people do this kind of things: #define TRUE 0 // ... if (some_function() == TRUE) { // Here, TRUE would mean success... // Do something } If we think about how we think in programming, we often have the following reasoning pattern: Do something Did it work? Yes -> That's ok, one case to handle No -> Why? Many cases to handle If we think about it again, it would have made sense to put the only neutral value, 0, to yes (and that's how C's functions work), while all the other values can be there to solve the many cases of the no. However, in all the programming languages I know (except maybe some experimental esotheric languages), that yes evaluates to false in an if condition, while all the no cases evaluate to true. There are many situations when "it works" represents one case while "it does not work" represents many probable causes. If we think about it that way, having 0 evaluate to true and the rest to false would have made much more sense. Conclusion My conclusion is essentially my original question: why did we design languages where 0 is false and the other values are true, taking in account my few examples above and maybe some more I did not think of? Follow-up: It's nice to see there are many answers with many ideas and as many possible reasons for it to be like that. I love how passionate you seem to be about it. I originaly asked this question out of boredom, but since you seem so passionate, I decided to go a little further and ask about the rationale behind the Boolean choice for 0 and 1 on Math.SE :)

    Read the article

  • When should I decline to make a requested change?

    - by reuscam
    I work on the software side of a company that provides custom hardware with software running on top of it. Often times the hardware is not engineered well. In those cases, I am often asked first to troubleshoot the problem - of course the symptom is always "your software crashed" or something along those lines. Just recently we had another one of these incidents where power on a USB line is not reliable, and it causes a USB device to fail. This causes a usability problem in one of our applications. I have been asked by upper management to handle this better - continually monitor the USB device, and if it disappears, then reboot, or try to reset it. Doing either of these is not guaranteed to fix anything. Ultimately, the real fix is to correct the reliability of the device from the hardware side. I could improve performance, but not to 100%, and of course I would be using my already limited time to bloat code and add yet another device monitoring thread. So with all that said, how do I make a good decision about when to say that this needs to be a hardware fix, and only a hardware fix? Can I approach this quantitatively, and come up with some sort of definitive yes/no test? I'm sure its not that easy.

    Read the article

  • Backup VM : Copy virtual disk xxx.vmdk The virtual disk is either corrupted or not a supported forma

    - by boiteavinc
    Hi I'm french. I'm student and I use ESXI4 for my studies. When I try backup my VMs, with ghettoVCBg2.pl and vSphere Management Assistant, I get the following error message on Vsphere Client : "Copy virtual disk xxx.vmdk The virtual disk is either corrupted or not a supported format". I have no error in the log VCB ; 03-23-2010 08:31:56 -- debug: Main: Login by vi-fastpass to: esxi 03-23-2010 08:31:56 -- debug: copyTask: Task START 03-23-2010 08:31:56 -- debug: copyTask: waiting for next job and sleep ... 03-23-2010 08:32:00 -- info: Initiate backup for AD_DNS_DHCP found on esxi 03-23-2010 08:32:09 -- debug: AD_DNS_DHCP original powerState: poweredOn 03-23-2010 08:32:09 -- debug: Creating Snapshot "ghettoVCBg2-snapshot-2010-03-23" for AD_DNS_DHCP 03-23-2010 08:33:19 -- info: AD_DNS_DHCP has 1 VMDK(s) 03-23-2010 08:33:19 -- debug: backupVMDK: Backing up "Raptor1 AD_DNS_DHCP/AD_DNS_DHCP.vmdk" to "Backup_VM VM/AD_DNS_DHCP/AD_DNS_DHCP-2010-03-23/$ 03-23-2010 08:33:19 -- debug: backupVMDK: Signal copyThread to start 03-23-2010 08:33:19 -- debug: backupVMDK: Backup progress: Elapsed time 0 min 03-23-2010 08:33:19 -- debug: copyTask: Wake up and follow the white rabbit, with status: doCopy 03-23-2010 08:33:19 -- debug: CopyThread: Start backing up VMDK(s) ... 03-23-2010 08:33:25 -- debug: copyTask: send copySuccess message ... 03-23-2010 08:33:25 -- debug: copyTask: waiting for next job and sleep ... 03-23-2010 08:34:20 -- debug: backupVMDK: Successfully completed backup for Raptor1 AD_DNS_DHCP/AD_DNS_DHCP.vmdk Elapsed time: 1 min 03-23-2010 08:34:22 -- debug: Removing Snapshot "ghettoVCBg2-snapshot-2010-03-23" for AD_DNS_DHCP 03-23-2010 08:34:24 -- debug: checkVMBackupRotation: Starting ... 03-23-2010 08:34:26 -- debug: Purging Backup_VM VM/AD_DNS_DHCP/AD_DNS_DHCP-2010-03-23--1 due to rotation max 03-23-2010 08:34:28 -- info: Backup completed for AD_DNS_DHCP! 03-23-2010 08:34:28 -- debug: Main: Disconnect from: esxi 03-23-2010 08:34:28 -- debug: Main: Calling final clean up 03-23-2010 08:34:28 -- debug: cleanUP: Thread clean up starting ... 03-23-2010 08:34:28 -- debug: cleanUp: Send exit to copyThread 03-23-2010 08:34:28 -- debug: copyTask: Wake up and follow the white rabbit, with status: exit 03-23-2010 08:34:28 -- debug: copyTask: die ... 03-23-2010 08:34:28 -- debug: cleanUp: Join passed 03-23-2010 08:34:28 -- info: ============================== ghettoVCBg2 LOG END ============================== My ghetto conf file is : VM_BACKUP_DATASTORE = "Backup_VM" VM_BACKUP_DIRECTORY = "VM" VM_BACKUP_ROTATION_COUNT = "3" DISK_BACKUP_FORMAT = "thin" ADAPTER_FORMAT = "lsilogic" POWER_VM_DOWN_BEFORE_BACKUP = "0" VM_SNAPSHOT_MEMORY = "1" VM_SNAPSHOT_QUIESCE = "1" LOG_LEVEL = "info" VM_VMDK_FILES = "all" I tried several I tried several DISK_BACKUP_FORMAT, I have same error. Despite the error, even when I get files on the NFS share. But when I try to open the vmx file with vmware workstation. I get this error: Can not open the disk 'G: \ Backup ESX \ VM \ AD_DNS_DHCP \ AD_DNS_DHCP-2010-03-23 - 1 \ AD_DNS_DHCP.vmdk' or one of the snapshot disks it depends on. Reason: The called function can not be performed on partial chains. Please open the parent virtual disk. I have no snapshot on my VM on ESXi. Can you help me ?

    Read the article

  • Varnish 503 Guru Mediation errors with pfsense and healthy apache

    - by Fammy
    We are running a pfsense firewall / load balancer with varnish as service, In front of Fedora linux webservers running apache. We are getting intermittent 503 guru mediation errors. We are a bit stuck scratching our heads because it is not easily repeatable. The timeouts are set to 30s (connect and first byte) but yet the 503 page will show instantly, not after 30s. Then if you refresh immediately it may very well work instantly and sometimes for a 100 refreshes. The load average on the web servers is < 1, the DB server is < 3 (all servers (web, db, pfsense/varnish) are physical rather than VM. I would have thought if the timeouts were being hit then the 503 page would only appear after 30s am I mistaken? Also when an error happens there does not appear to be any corresponding error in apache's log files. This seems to affect pages as well as images, so it is possible to have the page load fine, and for 9/10 images on the page to be fine but 1 not work An example of the varnish debug is below. It says no backend connection but I can't figure out why, if the load was high on apache I could understand it being flaky The machines are on the same gig ethernet lan 21 ReqStart c *IP-REMOVED* 33418 1274368062 21 RxRequest c GET 21 RxURL c /fashion/ 21 RxProtocol c HTTP/1.1 21 RxHeader c User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.5) Gecko/2008121622 Fedora/3.0.5-1.fc10 Firefox/3.0.5 21 RxHeader c Host: *ourdomain.com* 21 RxHeader c Accept: */* 21 RxHeader c Accept-Encoding: deflate, gzip 21 VCL_call c recv lookup 21 VCL_call c hash 21 Hash c /fashion/ 21 Hash c *ourdomain.com* 21 VCL_return c hash 21 VCL_call c miss fetch 21 FetchError c no backend connection 21 VCL_call c error restart 21 VCL_call c recv lookup 21 VCL_call c hash 21 Hash c /fashion/ 21 Hash c *ourdomain.com* 21 VCL_return c hash 21 VCL_call c miss fetch 21 FetchError c no backend connection 21 VCL_call c error restart 21 VCL_call c recv lookup 21 VCL_call c hash 21 Hash c /fashion/ 21 Hash c *ourdomain.com* 21 VCL_return c hash 21 VCL_call c miss fetch 21 FetchError c no backend connection 21 VCL_call c error deliver 21 VCL_call c deliver deliver 21 TxProtocol c HTTP/1.1 21 TxStatus c 503 21 TxResponse c Service Unavailable 21 TxHeader c Server: Varnish 21 TxHeader c Content-Type: text/html; charset=utf-8 21 TxHeader c Content-Length: 384 21 TxHeader c Accept-Ranges: bytes 21 TxHeader c Date: Wed, 11 Apr 2012 10:36:17 GMT 21 TxHeader c X-Varnish: 1274368062 21 TxHeader c Age: 0 21 TxHeader c Via: 1.1 varnish 21 TxHeader c Connection: close 21 TxHeader c X-Cache: MISS 21 Length c 384 21 ReqEnd c 1274368062 1334140577.449995041 1334140577.450334787 1.794108152 0.000282764 0.000056982

    Read the article

  • Grub 'Read Error' - Only Loads with LiveCD

    - by Ryan Sharp
    Problem After installing Ubuntu to complete my Windows 7/Ubuntu 12.04 dual-boot setup, Grub just wouldn't load at all unless I boot from the LiveCD. Afterwards, everything works completely normal. However, this workaround isn't a solution and I'd like to be able to boot without the aid of a disc. Fdisk -l Using the fdisk -l command, I am given the following: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 * 48959486 124067839 37554177 5 Extended /dev/sda5 48959488 124067839 37554176 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1937897471 456844288 83 Linux /dev/sdb6 1937899520 1953523711 7812096 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT Bootinfoscript I've used the BootInfoScript, and received the following output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdb6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdb3 starts at sector 200744960. But according to the info from fdisk, sdb3 starts at sector 2048. According to the info in the boot sector, sdb3 has 823461887 sectors, but according to the info from fdisk, it has 1024204799 sectors. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 208,896 48,957,439 48,748,544 7 NTFS / exFAT / HPFS /dev/sda3 * 48,959,486 124,067,839 75,108,354 5 Extended /dev/sda5 48,959,488 124,067,839 75,108,352 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1,024,208,894 1,953,523,711 929,314,818 5 Extended /dev/sdb5 1,024,208,896 1,937,897,471 913,688,576 83 Linux /dev/sdb6 1,937,899,520 1,953,523,711 15,624,192 82 Linux swap / Solaris /dev/sdb3 * 2,048 1,024,206,847 1,024,204,800 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 625,141,759 625,139,712 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 A48056DF8056B80E ntfs System Reserved /dev/sda2 A8C6D6A4C6D671D4 ntfs Windows /dev/sda5 fd71c537-3715-44e1-b1fe-07537e22b3dd ext4 /dev/sdb3 6373D03D0A3747A8 ntfs Steam /dev/sdb5 6f5a6eb3-a932-45aa-893e-045b57708270 ext4 /dev/sdb6 469848c8-867a-41b7-b0e1-b813a43c64af swap /dev/sdc1 725D7B961CF34B1B ntfs backup ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda5 / ext4 (rw,noatime,nodiratime,discard,errors=remount-ro) /dev/sdb5 /home ext4 (rw) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root A48056DF8056B80E chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root A8C6D6A4C6D671D4 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd / ext4 noatime,nodiratime,discard,errors=remount-ro 0 1 # /home was on /dev/sdb5 during installation UUID=6f5a6eb3-a932-45aa-893e-045b57708270 /home ext4 defaults 0 2 # swap was on /dev/sdb6 during installation UUID=469848c8-867a-41b7-b0e1-b813a43c64af none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-29-generic 2 = boot/vmlinuz-3.2.0-29-generic 1 = initrd.img 2 = vmlinuz 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda3 00000000 63 6f 70 69 61 20 65 20 63 6f 6c 61 41 63 65 64 |copia e colaAced| 00000010 65 72 20 61 20 74 6f 64 6f 20 6f 20 74 65 78 74 |er a todo o text| 00000020 6f 20 66 61 6c 61 64 6f 20 75 74 69 6c 69 7a 61 |o falado utiliza| 00000030 6e 64 6f 20 61 20 63 6f 6e 76 65 72 73 c3 a3 6f |ndo a convers..o| 00000040 20 64 65 20 74 65 78 74 6f 20 70 61 72 61 20 76 | de texto para v| 00000050 6f 7a 4d 61 6e 69 70 75 6c 61 72 20 61 73 20 64 |ozManipular as d| 00000060 65 66 69 6e 69 c3 a7 c3 b5 65 73 20 71 75 65 20 |efini....es que | 00000070 63 6f 6e 74 72 6f 6c 61 6d 20 6f 20 61 63 65 73 |controlam o aces| 00000080 73 6f 20 64 65 20 57 65 62 73 69 74 65 73 20 61 |so de Websites a| 00000090 20 63 6f 6f 6b 69 65 73 2c 20 4a 61 76 61 53 63 | cookies, JavaSc| 000000a0 72 69 70 74 20 65 20 70 6c 75 67 2d 69 6e 73 4d |ript e plug-insM| 000000b0 61 6e 69 70 75 6c 61 72 20 61 73 20 64 65 66 69 |anipular as defi| 000000c0 6e 69 c3 a7 c3 b5 65 73 20 72 65 6c 61 63 69 6f |ni....es relacio| 000000d0 6e 61 64 61 73 20 63 6f 6d 20 70 72 69 76 61 63 |nadas com privac| 000000e0 69 64 61 64 65 41 63 65 64 65 72 20 61 6f 73 20 |idadeAceder aos | 000000f0 73 65 75 73 20 70 65 72 69 66 c3 a9 72 69 63 6f |seus perif..rico| 00000100 73 20 55 53 42 55 74 69 6c 69 7a 61 72 20 6f 20 |s USBUtilizar o | 00000110 73 65 75 20 6d 69 63 72 6f 66 6f 6e 65 55 74 69 |seu microfoneUti| 00000120 6c 69 7a 61 72 20 61 20 73 75 61 20 63 c3 a2 6d |lizar a sua c..m| 00000130 61 72 61 55 74 69 6c 69 7a 61 72 20 6f 20 73 65 |araUtilizar o se| 00000140 75 20 6d 69 63 72 6f 66 6f 6e 65 20 65 20 61 20 |u microfone e a | 00000150 63 c3 a2 6d 61 72 61 4e c3 a3 6f 20 66 6f 69 20 |c..maraN..o foi | 00000160 70 6f 73 73 c3 ad 76 65 6c 20 65 6e 63 6f 6e 74 |poss..vel encont| 00000170 72 61 72 20 6f 20 63 61 6d 69 6e 68 6f 20 61 62 |rar o caminho ab| 00000180 73 6f 6c 75 74 6f 20 70 61 72 61 20 6f 20 64 69 |soluto para o di| 00000190 72 65 63 74 c3 b3 72 69 6f 20 61 20 65 6d 70 61 |rect..rio a empa| 000001a0 63 6f 74 61 72 2e 4f 20 64 69 72 65 63 74 c3 b3 |cotar.O direct..| 000001b0 72 69 6f 20 64 65 20 65 6e 74 72 61 64 61 00 fe |rio de entrada..| 000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 7a 04 00 00 |............z...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in Begging / Appreciation ;) If anything else is required to solve my problem, please ask. My only hopes are that I can solve this, and that doing so won't require re-installation of Grub due to how complicated the procedures are, or that I would be needed to reinstall the OS', as I have done so about six times already since friday due to several other issues I've encountered. Thank you, and good day. System Ubuntu 12.04 64-bit / Windows 7 SP1 64-bit 64GB SSD as boot/OS drive, 1TB HDD as /Home Swap and Steam drive.

    Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >