Search Results

Search found 17063 results on 683 pages for 'frank computer'.

Page 123/683 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• How to charge an iPhone on a Windows PC without Installaing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• Webpage / Other application does not fit fully on screen

  - by Frank Levebre

  I have an ASUS Eee PC 1008 HA The problem is that I have to move the cursor up/down in order to see the start control / icons at the bottom of the screen and the cursor up in order to see the menu bar / etc at the top of the screen, ie the whole page does not fit on the screen anymore. It has nothing to do with the zoom % in the bottom right hand corner. This also is the case whatever application I am running, ie Internet explorer , word, excel or whatever. Does anybody have an idea what is the problem and how I can resolve this?

  Read the article

• Connecting to localhost with smartphone: possible?

  - by Arturas Molcanovas

  I am currently developing a mobile PHP project on localhost (or, to be more precise, a locally hosted website reachable at http://azgoth/) on my desktop computer and wish to check out how the design looks on my phone's various browsers, however, since the project's actually in my computer rather than the public net, I am unable to do so. Both my Desktop computer and smartphone connect to the internet via the same router, so I wondered, would it be possible to somehow make http://azgoth/ accessible to my smartphone in a similar way that my desktop computer accesses it, without making it public for everyone to see? OS: Windows XP SP 3 Service: Apache HTTPD Router: D-Link DIR-300 FTP Directory

  Read the article

• how to customize debian installation cd for your needs

  - by Frank

  I have with me a Debian CD, which I want to customize for my own needs. I have extracted the CD and started to change some parts of it, e.g Splash screen (splash.png) installer Title (through isolinux.cfg) etc These are the things that I want to do: Change the Splash logo at start up of installation to have my own (which is done) Change the grub boot parameters to use my comapny name on it. Change the set of packages in it, so that I can have my own set of packages in it and only those packages are installed Do some post installation steps Customize it's startup and login screen to have my company name. After I am done with this customization, I need to build its live installer CD so that I can install it on my own, on any other system.

  Read the article

• Migrating to LDAP

  - by Frank Brenner

  Hi Folks, I've started a new job at a house where they've got an amazingly unruly patchwork of Linux, xBSD, and OpenSolaris boxes. Every box has its own user auth using local /etc/passwd, etc. Users/Groups have differing uids/gids on each machine, and each machine has its own /home/ tree. (no central NAS /homes) My job is get get everything into an LDAP directory and use that for login auth. How do I get LDAP to deal with the differing uids/gids? Thanks.

  Read the article

• Add domain user as local admin in Windows 7 using VPN to connect to domain

  - by kev

  I am rebuilding my work computer from scratch and need to add my domain user as a local admin on my computer. I have successfully added my PC to the domain, but I cannot add my domain user account to the local admins. I have tried to do the following: Connect to the work domain using a Windows VPN Add my computer to the work domain Start right click on Computer Manage - go to Users and Groups right click on Administrators group and add my domain user The problem is that after adding my domain user to the Administrators group, I don't see my domain user under the Local Users group. When I try to log on as my domain user I get the following error message: There are currently no logon servers available to service the logon request Any ideas?

  Read the article

• Where did my backup files go? Can they be recovered?

  - by Ken

  I just purchased a Western Digital Essential SE 1TB external hard drive from Best Buy at their recommendation. I then exchanged it for a Toshiba Canvio (I think that was the name). I have a Toshiba Qosmio X505-Q898. The Canvio locked up my computer and rewrote some kind of OS file, and erased all the restore points as well as the system image backup (according to Best Buy) just by plugging it in for the first time. Never even got to the install part or anything -- plugged it in and fried my computer. They spent about an hour and a half on my computer and got it back to a somewhat working condition and gave me access to my files. So now they say I have to back it up using my recovery disk and rewriting my OS. Enter the Essential. Brought it home last night, plugged it in and installed everything. Works perfect, no problems. Backed up everything on it. I unplugged and plugged it twice to make sure that everything was on it. Essential told me it had both the HDD and SSD backed up. So I reinstalled my OS. Plugged the Essential in and everything loads right up. Went to retrieve my files and the Western Digital has nothing on it. It shows all my music, pics, ETC. as still being on my computer and needing to be backed up, but since there are no files on my computer now. Where is this information coming from and where did my files go? It's about 810GB worth of files I've amassed over several years. Is there any way to recover data from this? I plan to contact Western Digital and Best Buy, just thought I would check here too. Any advice will be appreciated as a lot of these files are invaluable to me.

  Read the article

• AVG Installer Error

  - by the curious one

  my computer is running window XP home editon. the avg i am using is expirying soon and so a pop out ask me to install AVG Anti-Virus Free Edition 2011. When the download is about to complete, i was ask to reboot the computer, i click "OK". after my computer restart , there was a pop out say "AVG Installer- Error A system restart is required in order to continue with the installation. Please restart your system and try again." Since the only option was "OK" i click it, and restart my computer. After restarting, the same pop-out appear. I could not download AVG Anti-Virus Free Edition 2011 as the pop-out keep appearing if i run it or uninstall. can anyone help me?? btw my brower is int

  Read the article

• Windows XP hanging on login screen

  - by Nathan W

  I have been given two Eee PC 100HA to manage for some people, they are both running the same hardware and XP home but one is having some strange problems with logging on. The main problem is that it hangs at the login screen for ages and sometimes never gets to the desktop. The strange thing is it only seems to do it after the computer has been cold started, but it won't do it if the computer has been restarted. I have made two logs of the start up with process monitor but every time the logger is attached the computer will log in fine. I have also set the computer to blue screen and create a crash dump when you press ctrl scroll twice but when I do it at the hung login it just sits at a black screen and I don't get a crash dump, I have turned off the auto system restart on failure option also. I can usually fix most computer start up and shutdown problems but this one has got me stuffed. Has anyone had the same problems before, or can recommend something that I can try? Cheers.

  Read the article

• Wired connection to windows ISC stopped working

  - by cmpickle

  I have had my Linux box connected to the internet through a Windows computer by wiring them together with a cat5 cable then the Windows is connected wireless to a router. This setup has worked since I got the Linux box but just yesterday stopped working. The changes that occurred were: I changed networking so that I was connecting the Linux box and Windows computer through a second router so during that time the Linux box went through a router to connect to the Windows computer that was still connected wireless to the first router. The Internet didn't work on the Linux box at the time they second router was involved when I removed it and directly connected the Linux box and Windows the Internet worked again. Another thing that changed was that I had disconnected my Windows computer from all network connections and deleted them to make my Ethernet work better. Also at that time my dad had I connect the Windows to a third router and changed some settings in it. After reconnecting this time the connection between the router and the windows would not establish. If anyone has any ideas as to why this is I would greatly appreciate it!

  Read the article

• Elastix, how to MOVE files from one server to other server?

  - by yudayyy

  In my office, i have to schedule for moving a file from one computer to other computer (Both are using Elastix). My idea is using cron, scp, and rm to do this. So here are the script that i use: scp -r /home/data/* [email protected]:/home/data1 && rm -r /home/data/* That script did the copy, but not remove the source file. I already read this question: Hov to _MOVE_ files with scp? The problem is, the computer doesn't have an internet connection. So i cannot install rsync on my elastix computer. yum install rsync Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile and then it freezes. Any idea how to do this?

  Read the article

• Use name instead of IP address for home network

  - by abney317

  I have IIS7 on my computer, and I can access it through other computers in my house on the same network through my computer's IP address - 192.168.1.10x Instead of typing in http : //192.168.1.10x/ I want to be able to go to http : //somename/ I know you can change the hosts file to add it but I'd have to do that on each computer and I'd still have to type in the IP to access it from my iPod/Wii... etc.

  Read the article

• Use name instead of IP address for home network

  - by abney317

  I have IIS7 on my computer, and I can access it through other computers in my house on the same network through my computer's IP address - 192.168.1.10x Instead of typing in http : //192.168.1.10x/ I want to be able to go to http : //somename/ I know you can change the hosts file to add it but I'd have to do that on each computer and I'd still have to type in the IP to access it from my iPod/Wii... etc.

  Read the article

• If my Remote Desktop Connection Broker server goes down, can users still access my two Terminal Servers?

  - by Frank Owen

  I would like to setup the Remote Desktop Connection Broker to allow better load balancing of the two terminal servers we have as well as allowing the user to re-establish to the correct server if they get disconnected. My worry is, if I set this up and the server this service is running goes down, does the terminal server stop accepting connections or will they just lose the benefit of having RDCB turned on? I don't want to add another point of failure in this equation unless I have to.

  Read the article

• Offline productivity

  - by Frank Meulenaar

  On some days I'm commuting 2hs (oneway) in the train. I don't have any mobile internet nor is there always WiFi service in the train. Because of security reasons I can't do any work in the train so I'm trying to work on my geek time. I'm looking for general solutions on how to do this (I'm on FireFox/Windows but I don't think it matters) Email works perfectly with gmail offline. It syncs directly when online and remembers complicated stuff. So far I used the ScrapBook plugin to store an website. It works good, but I have to download my favorite news page every day again - I want it to sync as soon as possible. It would even be more awesome if I could click a page on my desktop and my laptop would sync as soon as it has the chance. (edit: maybe the autosave plugin for scrapbook can do this) Similarily, I use the Downloadhelper plugin to download youtube vids, but I'd like something that automatically downloads videos from a given channel. Any tips are welcome. So far my early morning schedule is: wake up, power on laptop, make coffee, power off laptop and leave within 10 minutes (enough time for GMail to sync) but I can imagine a system where my laptop stays on during the night (or boots before I wake (and makes me coffee :])).

  Read the article

• Airpot Express configuration

  - by Christina

  We are trying to set up remote access to a computer that houses a server fro a particular program we are running. The program says we need to configure the office router. In the firewall settings it says to open ports 5345-5351 (TCP only). Port Forwarding: You will also need to forward the same range of ports (5345-5351) to the computer running the Server. This typically requires that the computer running the Server be assigned a static IP on the local network. Having trouble figuring out which IP address we actually need to be using on the client side of this program in order to access the server computer. Can someone walk through this process?? We are working on Mac OSX 10.5. Thank you in advance!

  Read the article

• find in windows (batch files)

  - by Frank

  Does the find command in windows (command line) work to search inside of excel files?

  Read the article

• While tagging in SharePoint 2010, how to get content based tag suggestions?

  - by Frank

  SharePoint by default offers an auto-complete list of taxonomy-based tags. But how to get a suggestion list, that is based on given taxonomy, item properties, context and document content?

  Read the article

• Logitech Optical Mouse Frozen In Middle of Windows XP Pro Screen

  - by Code Sherpa

  Hi. I have a Logitech Optical Mouse/Keyboard. I have been using them just fine with the system drivers for almost a year now. I recently updated my Kaspersky software and rebooted. Now the mouse is frozen in the middle of my screen. I am not able to login to the Windows XP Pro box that has the frozen mouse (because i can't work the mouse) but am able to remote desktop to this computer. Things I know / have tried: When I boot on the problem computer, I am able to use the keyboard, but not the mouse. I have installed the latest version of Logitech's SetPoint (with the updated drivers) on the problem computer (via remote desktop) and that didn't seem to matter. I bought new batteries for the mouse and that didn't matter. I have tried the mouse/keyboard on another computer and the mouse works just fine there. My suspicion is that the Kaspersky install has overwritten a driver of some sort. Things I have not done (and would appreciate detailed steps if you feel this is the way to go): 1) Uninstalled all the mouse drivers on the machine and reboot. Then, reinstall. Note: When I get to the Device Manager I don't see an option for Human Interface Devices (where the mouse device is). Here are my options: Computer, Disk Drives, DVD/CD-Rom drives, Floppy controllers, IDE ATA/ATAPI, Imaging devices, Network Adapters, Other devices, Ports, Processors, Sound, video, and gaming, System devices, USB controllers. Also, I should point out that Video Controller is the only thing under Other devices and it has a yellow exclamation mark. The same is true for all the items under Universal Serial Bus controllers. I think this means I have to update my BIOS but, since my mouse was working just fine without doing that, I don't think that is my problem. So, how do I get to my Mouse Device? 2) Update my BIOS. Note: As pointed out above, I don't think this matters as my mouse was working just fine under my computer's current BIOS version. Thanks for your help.

  Read the article

• CPanel: Every url is being redirected to http://:2083

  - by Frank

  On my cpanel server, I restored about 50 accounts from crashed cpanel server. All of the sites were working fine, but suddenly without changing anything, every site started to get redirected to url "http://:2083/"., There is nothing in logs, no errors. when i do wget it says: wget grinfeld.com.br --2012-09-04 13:18:23-- http://grinfeld.com.br/ Resolving grinfeld.com.br... 198.101.221.254 Connecting to grinfeld.com.br|198.101.221.254|:80... connected. HTTP request sent, awaiting response... 301 Moved Location: https://:2083/ [following] https://:2083/: Invalid host name.

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• DPM - Monitoring is green, Protection has error and Latest rec point is old. How do I interpret that?

  - by LosManos

  How do I read the DPM info in this case? Monitoring says Failed but Protection shows Ok while having a Latest recovery point from last year. Under Monitoring tab I have Failed for Source | Computer | Protection group | Start time Computer\System Protection | MyServerName | Recovery point | 2014-06-09 19:00:00 which shows me that something happened last night. But under Protection tab everything is green. Here I have Protection group member | | Protection status Protection group ..name.. Computer: MyServerName Computer\System protection Bare metal recovery OK ... Latest recovery point: 2013-12-12 06:32:54 My guess is that backup failed last night once, but succeeded later. It then found out that there hasn't been any change since sometime last year and leave it be and flags Ok.

  Read the article

• Protecting Backups from Viruses

  - by Frank Thornton

  Currently we are using ReadyNAS RN102 by NETGEAR to hold all our images from all our machines. My question is can viruses expand from the machines and infect the NAS drive and the backups? We are using AOMEI Backupper. EDIT: Basically, I want to keep my clean backups clean. I keep Daily, Weekly, Monthly achievable backups, my worry is a virus might attempt or try to infect these backups making using them worthless.

  Read the article

• Setting up Multiple Routers (as Hardware Firewalls) behind a Home Router

  - by Synetech

  I’ve currently got one computer behind a router with built-in firewall functionality, connected to a home cable-modem that has a single Ethernet port and one IP. I’m going to have to set up another computer for the rest of the family to use which of course will need to be connected to the Internet, probably wirelessly since the modem is in my room and the new system would not be. What I would like to do is to get two more small routers with firewall capability and connect each computer to a router, which would in turn connect to the main router which connects to the cable-modem. That way, both systems have a hardware firewall protecting them (particularly the wireless system) and the burden of blocking would be reduced on both the computer CPUs and the main router because the secondary routers would handle some of the workload. I’m trying to find out about the complexities inherent in this design and how I could set it up to work, specifically the IP handling and NAT aspect. Thanks a lot.

  Read the article

• Domain user periodically can't login, but only temporarily?

  - by Josh

  Ok, this is a strange one that I'm having trouble replicating letting alone solving. I have a user who uses two computers (both XP sp3) on the domain with a roaming profile. She has no problems on her personal computer but occasionally needs to use a shared computer. On this shared computer she is sometimes (~once a week) unable to login with the error message "Username or password incorrect. Check username password and domain and try again." I've checked when this happens and her username and password are indeed entered correctly. Now the strange part - if someone else logs in to the computer (which so far always works) and then logs out she is able to log in after that. This problem began after a recent and long overdue password change. I've tried to replicate this problem after a reboot, or after another user logs out to no avail. Any suggestions on troubleshooting or replicating this one? Anyone experienced something similar?

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >