Search Results

Search found 3881 results on 156 pages for 'pointing stick'.

Page 123/156 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

  • RewriteRule not working for certain URLs

    - by keiki
    There are a few domains pointing towards the same server, and of course I need them all redirect to only one of them. Redirects work, but only for certain URLs. What works: http://www.domain.com, http://domain.com, domain.com/index.html, domain.com/index.php, , domain.com/nonExistentDirectory, and if I click in the menu the following URLs are also redirected correctly: domain.com/foo/bar, domain.com/foo/bar.html or .php or other extension. What doesn't work: domain.com/existentDirectory, domain.com/foo/bar (if I type the URL in the address bar). If anyone will have the time and skill and will to tell me where's the mistake, I'll be deeply grateful. Here's my .htaccess file: AddHandler x-httpd-php .html .htm <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file \.(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> <ifModule mod_expires.c> ExpiresActive On ExpiresDefault "access plus 1 seconds" ExpiresByType text/html "access plus 1 seconds" ExpiresByType image/gif "access plus 2592000 seconds" ExpiresByType image/jpeg "access plus 2592000 seconds" ExpiresByType image/png "access plus 2592000 seconds" ExpiresByType text/css "access plus 2592000 seconds" ExpiresByType text/javascript "access plus 216000 seconds" ExpiresByType application/x-javascript "access plus 216000 seconds" </ifModule> <ifModule mod_headers.c> <filesMatch "\\.(ico|pdf|flv|jpg|jpeg|png|gif|swf)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\\.(css)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\\.(js)$"> Header set Cache-Control "max-age=216000, private" </filesMatch> <filesMatch "\\.(xml|txt)$"> Header set Cache-Control "max-age=216000, public, must-revalidate" </filesMatch> <filesMatch "\\.(html|htm|php)$"> Header set Cache-Control "max-age=1, private, must-revalidate" </filesMatch> </ifModule> <ifModule mod_headers.c> Header unset ETag </ifModule> FileETag None <ifModule mod_headers.c> Header unset Last-Modified </ifModule> # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress RewriteCond %{HTTP_HOST} ^foo\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo1\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo1\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo2\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo2\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo3\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo3\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo8\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo8\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] Thinking that the above version was overkill, I've also tried to redirect all the requests for domains different than the main on to be redirected to it like this: RewriteCond %{HTTP_HOST} !^domain\.com$ [NC] RewriteRule ^(.*)$ http://domain.com [L,R=301] Is it also wrong? Because it doesn't work either! P.S. @Sodved I've tried that and it doesn't help (I comment here because I can't seem to be able to comment your answer.) Removing the following piece of code didn't solve the issue either, so the problem must be somewhere else: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress New details: using this tool for checking the redirects I got the following results for the URLs that are not redirected: Checked link: http://domain.com/aDirectory/ Type of link: direct link (note the trailing slash above) and: Checked link: http://domain.com/aDirectory Type of redirect: 301 Moved Permanently Redirected to: http://domain.com/aDirectory/ (no trailing slash here) I hope/suspect I'm getting closer to the cause of this behavior.

    Read the article

  • Numerically stable(ish) method of getting Y-intercept of mouse position?

    - by Fraser
    I'm trying to unproject the mouse position to get the position on the X-Z plane of a ray cast from the mouse. The camera is fully controllable by the user. Right now, the algorithm I'm using is... Unproject the mouse into the camera to get the ray: Vector3 p1 = Vector3.Unproject(new Vector3(x, y, 0), 0, 0, width, height, nearPlane, farPlane, viewProj; Vector3 p2 = Vector3.Unproject(new Vector3(x, y, 1), 0, 0, width, height, nearPlane, farPlane, viewProj); Vector3 dir = p2 - p1; dir.Normalize(); Ray ray = Ray(p1, dir); Then get the Y-intercept by using algebra: float t = -ray.Position.Y / ray.Direction.Y; Vector3 p = ray.Position + t * ray.Direction; The problem is that the projected position is "jumpy". As I make small adjustments to the mouse position, the projected point moves in strange ways. For example, if I move the mouse one pixel up, it will sometimes move the projected position down, but when I move it a second pixel, the project position will jump back to the mouse's location. The projected location is always close to where it should be, but it does not smoothly follow a moving mouse. The problem intensifies as I zoom the camera out. I believe the problem is caused by numeric instability. I can make minor improvements to this by doing some computations at double precision, and possibly abusing the fact that floating point calculations are done at 80-bit precision on x86, however before I start micro-optimizing this and getting deep into how the CLR handles floating point, I was wondering if there's an algorithmic change I can do to improve this? EDIT: A little snooping around in .NET Reflector on SlimDX.dll: public static Vector3 Unproject(Vector3 vector, float x, float y, float width, float height, float minZ, float maxZ, Matrix worldViewProjection) { Vector3 coordinate = new Vector3(); Matrix result = new Matrix(); Matrix.Invert(ref worldViewProjection, out result); coordinate.X = (float) ((((vector.X - x) / ((double) width)) * 2.0) - 1.0); coordinate.Y = (float) -((((vector.Y - y) / ((double) height)) * 2.0) - 1.0); coordinate.Z = (vector.Z - minZ) / (maxZ - minZ); TransformCoordinate(ref coordinate, ref result, out coordinate); return coordinate; } // ... public static void TransformCoordinate(ref Vector3 coordinate, ref Matrix transformation, out Vector3 result) { Vector3 vector; Vector4 vector2 = new Vector4 { X = (((coordinate.Y * transformation.M21) + (coordinate.X * transformation.M11)) + (coordinate.Z * transformation.M31)) + transformation.M41, Y = (((coordinate.Y * transformation.M22) + (coordinate.X * transformation.M12)) + (coordinate.Z * transformation.M32)) + transformation.M42, Z = (((coordinate.Y * transformation.M23) + (coordinate.X * transformation.M13)) + (coordinate.Z * transformation.M33)) + transformation.M43 }; float num = (float) (1.0 / ((((transformation.M24 * coordinate.Y) + (transformation.M14 * coordinate.X)) + (coordinate.Z * transformation.M34)) + transformation.M44)); vector2.W = num; vector.X = vector2.X * num; vector.Y = vector2.Y * num; vector.Z = vector2.Z * num; result = vector; } ...which seems to be a pretty standard method of unprojecting a point from a projection matrix, however this serves to introduce another point of possible instability. Still, I'd like to stick with the SlimDX Unproject routine rather than writing my own unless it's really necessary.

    Read the article

  • Issues glVertexAttribPointer last 2 parameters?

    - by NoobScratcher
    Introduction Hello I will start out by explaining my setup, showing samples as I go along explaining the situation. I'm using these tools: OpenGL 3.3 GLSL 330 C++ Problem The problem is when I render the wavefront obj 3d model it gives a very weird visual glitch the model was supposed to be a square but instead its a triangluated mess with parts of the vertexes pointing in a stretched direction in massive amounts towards the bottom left side of the frustum.... Explanation: I'm using std::vectors to store my wavefront .obj model data using sscanf to get the floating point values into the structure members x,y,z and store them into the Points structure variable p; int index = IndexAssigner(1, 1); ifstream file (list[index].c_str() ); points.push_back(Point()); Point p; int face[4]; while (!file.eof() ) { char modelbuffer[10000]; file.getline(modelbuffer, 10000); switch(modelbuffer[0]) { case 'v' : sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); break; case 'f': sscanf(modelbuffer, "f %d %d %d %d", face, face+1, face+2, face+3 ); faces.push_back(face[0]); faces.push_back(face[1]); faces.push_back(face[2]); faces.push_back(face[3]); } //Turn on FileReader aka "RENDER CODE" FileReader = true; } then I render the Points vector using the .data() member of std::vectors to the frustum. Other declarations: int numfloats = 4; float* point=reinterpret_cast<float*>(&points[0]); int num_bytes=numfloats*sizeof(float); Vector declarations: struct Point {float x, y , z; }; std::vector<int>faces; std::vector<Point>points; Render code: glGenBuffers(1, &vertexbuffer); glGenTextures(1, &ModelTexture); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBindTexture(GL_TEXTURE_3D, ModelTexture); glTexImage2D(GL_TEXTURE_2D, 0,GL_RGBA, ModelSurface->w, ModelSurface->h, 0, GL_BGR, GL_UNSIGNED_BYTE, ModelSurface->pixels); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glBufferData(GL_ARRAY_BUFFER, sizeof(points), points.data(), GL_STATIC_DRAW); glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); glEnableVertexAttribArray(3); //Translation Process GLfloat TranslationMatrix[] = { 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 1.0, 0.0, 0.0, 0.0, 1.0 }; //Send Translation Matrix up to the vertex shader glUniformMatrix4fv(translation, 1, TRUE, TranslationMatrix); glDrawElements( GL_QUADS, faces.size(), GL_UNSIGNED_INT, faces.data()); I tried looking at what was causing this and went through every function every parameter ,etc looked at the man pages. Then found out that it could be my glVertexAttribPointer. Here are the man pages for glVertexAttribPointer http://www.opengl.org/sdk/docs/man/xhtml/glVertexAttribPointer.xml The last 2 parameters is my problem How do I write those 2 last parameters do I try putting the data from Points into it?. glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); How does it work with vectors? Is it fast?* if you can not be bothered too look at the man pages here is the scripts coming from the man pages directly. Stride Specifies the byte offset between consecutive generic vertex attributes. If stride is 0, the generic vertex attributes are understood to be tightly packed in the array. The initial value is 0. Pointer Specifies a pointer to the first component of the first generic vertex attribute in the array. The initial value is 0. If you want my full source - http://ideone.com/fPfkg Thanks Again if you do read this.

    Read the article

  • Java EE 7 Roadmap

    - by Linda DeMichiel
    The Java EE 6 Platform, released in December 2009, has seen great uptake from the community with its POJO-based programming model, lightweight Web Profile, and extension points. There are now 13 Java EE 6 compliant appserver implementations today! When we announced the Java EE 7 JSR back in early 2011, our plans were that we would release it by Q4 2012. This target date was slightly over three years after the release of Java EE 6, but at the same time it meant that we had less than two years to complete a fairly comprehensive agenda — to continue to invest in significant enhancements in simplification, usability, and functionality in updated versions of the JSRs that are currently part of the platform; to introduce new JSRs that reflect emerging needs in the community; and to add support for use in cloud environments. We have since announced a minor adjustment in our dates (to the spring of 2013) in order to accommodate the inclusion of JSRs of importance to the community, such as Web Sockets and JSON-P. At this point, however, we have to make a choice. Despite our best intentions, our progress has been slow on the cloud side of our agenda. Partially this has been due to a lack of maturity in the space for provisioning, multi-tenancy, elasticity, and the deployment of applications in the cloud. And partially it is due to our conservative approach in trying to get things "right" in view of limited industry experience in the cloud area when we started this work. Because of this, we believe that providing solid support for standardized PaaS-based programming and multi-tenancy would delay the release of Java EE 7 until the spring of 2014 — that is, two years from now and over a year behind schedule. In our opinion, that is way too long. We have therefore proposed to the Java EE 7 Expert Group that we adjust our course of action — namely, stick to our current target release dates, and defer the remaining aspects of our agenda for PaaS enablement and multi-tenancy support to Java EE 8. Of course, we continue to believe that Java EE is well-suited for use in the cloud, although such use might not be quite ready for full standardization. Even today, without Java EE 7, Java EE vendors such as Oracle, Red Hat, IBM, and CloudBees have begun to offer the ability to run Java EE applications in the cloud. Deferring the remaining cloud-oriented aspects of our agenda has several important advantages: It allows Java EE Platform vendors to gain more experience with their implementations in this area and thus helps us avoid risks entailed by trying to standardize prematurely in an emerging area. It means that the community won't need to wait longer for those features that are ready at the cost of those features that need more time. Because we have already laid some of the infrastructure for cloud support in Java EE 7, including resource definition metadata, improved security configuration, JPA schema generation, etc., it will allow us to expedite a Java EE 8 release. We therefore plan to target the Java EE 8 Platform release for the spring of 2015. This shift in the scope of Java EE 7 allows us to better retain our focus on enhancements in simplification and usability and to deliver on schedule those features that have been most requested by developers. These include the support for HTML 5 in the form of Web Sockets and JSON-P; the simplified JMS 2.0 APIs; improved Managed Bean alignment, including transactional interceptors; the JAX-RS 2.0 client API; support for method-level validation; a much more comprehensive expression language; and more. We feel strongly that this is the right thing to do, and we hope that you will support us in this proposed direction.

    Read the article

  • Attending a Career Fair: &ldquo;Don&rsquo;t be shy &ndash; Be prepared&rdquo;

    - by jessica.ebbelaar
    There are a large number of ways to interact with companies nowadays. The career fair is a very effective and personal way to interact with a number of different companies in a very short period of time. Here are some simple tips to help you perform during a career fair. Do research The key to being successful at a career fair is to do research before you go. Make a first selection of the companies you feel could be interesting for you. Include many types of employers. Once you have decided on the list of companies you want to visit, go to their career portal. Inform yourself about what the company does, i.e what roles there are available, how the company culture is described, what impression the testimonials give you. The question that you still have after reviewing this information, are the ones you can discuss with the company on the fair. Sell yourself Visit the companies you have on your top 5 list first, so you will be at your highest energy level to make that first impression. Think in advance about what you are going to tell the recruiter. Prepare a 30-second introduction (including degree, strengths, skills & experience) Be confident when you talk about your experience. Remember to start the conversation with a smile, make good eye contact and give a firm handshake. You could be speaking to your next manager, so be professional! If you already know what jobs you are interested in, relate your skills and experience to the roles that the company has available. If you are not yet sure gather as much information as you can about employment and/or hiring procedures, specific skills necessary for different jobs, training and career paths. Stand out As career fairs are very crowded and the attending companies meet with a lot of potential candidates on one day, you have to make sure you are noticed in a positive way. A good preparation and asking questions that show you have a good understanding of the industry, organization and roles will help you. Be aware of time demands on employers. Do not monopolize an employer's time. Dress appropriately to make a good first impression. Bring your resume Do not forget to bring your resume in print or on a USB-stick to the fair. If you are searching for different types of jobs, bring different versions of your resume. Your resume should be short and professional on white paper that is free of graphics or fancy print styles and containing larger margins for interviewer notes. Follow up After each conversation ask who you can contact for follow-up discussions about the specific roles. Use the back of a business card to record notes that help you remember important details and follow-up instructions. If no card is available, record the contact information and your comments in your notepad or phone. Last but not least, thank everyone you talk to for their time. Follow up as soon as possible with thank you notes that address the companies’ hiring needs, your qualifications, and express your desire for a second interview. What not to do… Do not visit a company with a group of friends. Interact with the companies on your own, to make your own positive impression. Do not walk up to a recruiter and interrupt a current conversation; wait your turn and be polite. What you should absolutely avoid is a grab and run on freebies! Take the time to speak to the company and ask for a freebie at the end of the conversation in case they are not offered to you. Good luck with the preparations for the career fair you will attend. Oracle recruiters look forward to meet you! They will be present on a large number of fairs in the region. For an overview of the fairs go to the Events & Calendar page on http://campus.oracle.com If you have any questions related to this article feel free to contact [email protected].

    Read the article

  • Need help partitioning when reinstalling Ubuntu 14.04

    - by Chris M.
    I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

    Read the article

  • Artec TV18R Tuner not working :(

    - by Antillar Maximus
    Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

    Read the article

  • PowerShell and SMO – be careful how you iterate

    - by Fatherjack
    I’ve yet to have a totally smooth experience with PowerShell and it was late on Friday when I crashed into this problem. I haven’t investigated if this is a generally well understood circumstance and if it is then I apologise for repeating everything. Scenario: I wanted to scan a number of server for many properties, including existing logins and to identify which accounts are bestowed with sysadmin privileges. A great task to pass to PowerShell, so with a heavy heart I started up PowerShellISE and started typing. The script doesn’t come easily to me but I follow the logic of SMO and the properties and methods available with the language so it seemed something I should be able to master. Version #1 of my script. And the results it returns when executed against my home laptop server. These results looked good and for a long time I was concerned with other parts of the script, for all intents and purposes quite happy that this was an accurate assessment of the server. Let’s just review my logic for each step of the code at the top. Lines 1 to 7 just set up our variables and write out the header message Line 8 our first loop, to go through each login on the server Line 10 an inner loop that will assess each role name that each login has been assigned Line 11 a test to see if each role has the name ‘sysadmin’ Line 13 write out the login name with a bright format as it is a sysadmin login Line 17 write out the login name with no formatting It is quite possible that here someone with more PowerShell experience than me will be shouting at their screen pointing at the error I made but to me this made total sense. Until I altered the code, I altered lines 6 and 7 of code above to be: $c = $Svr.Logins.Count write-host “There are $c Logins on the server” This changed my output to look like this: This started alarm bells ringing – there are clearly not 13 logins listed So, let’s see where things are going wrong, edit the script so it looks like this. I’ve highlighted the changes to make Running this code shows me these results Our $n variable should count up by one for each login returned and We are clearly missing some logins. I referenced this list back to Management Studio for my server and see the Logins as below, where there are clearly 13 logins. We see a Login called Annette in SSMS but not in the script results so I opened that up and looked at its properties and it’s server roles in particular. The account has only public access to the server. Inspection of the other logins that the PowerShell script misses out show they too are only members of the public role. Right now I can’t work out whether there is a good reason for this and if it should be expected behaviour or not. Please spend a few minutes to leave a comment if you have an opinion or theory for this. How to get the full list of logins. Clearly I needed to get a full list of the logins so set about reviewing my code to see if there was a better way to iterate through the roles for each login. This is the code that I came up with and I think it is doing everything that I need it to. It gives me the expected results like this: So it seems that the ListMembers() method is the trouble maker in my first versions of the code. I would have expected that ListMembers should return Logins that are only members of the public role, certainly Technet makes no reference to it being left out in it’s Login.ListMembers details. Suffice to say, it’s a lesson learned and I will approach using it with caution in future circumstances.

    Read the article

  • Building Tag Cloud Declarative ADF Component

    - by Arunkumar Ramamoorthy
    When building a website, there could a requirement to add a tag cloud to let the users know the popular tags (or terms) used in the site. In this blog, we would build a simple declarative component to be used as tag cloud in the page. To start with, we would first create the declarative component, which could display the tag cloud. We will do that by creating a new custom application from the new gallery. Give a name for the app and the project and from the new gallery, let us create a new ADF Declarative Component We need to specify the name for the declarative component, attributes in it etc. as follows For displaying the tags as cloud, we need to pass the content to this component. So, we will create an attribute to hold the values for the tag. Let us name it as "value" and make it as java.lang.String  type. Once after this, to hold the component, we need to create a tag library. This can be done by clicking on the Add Tag Library button. Clicking on OK buttons in all the open dialogs would create a declarative component for us. Now, we need to display the tag cloud based on the value passed to the component. To do that, we assume that the value is a Tree Binding and has two attributes in it, say "Name" and "Weight". To make a tag cloud, we would put together the "Name" in a loop and set it's font size based on the "Weight". After putting our logic to work, here is how the source look Attributes added to the declarative components can be retrieved by using #{attrs.<attribute_name>}. Now, we need to deploy this project as ADF Library Jar file, so that this can be distributed to the consuming applications. We'll select ADF Library Jar as type and create the profile. We would be getting the jar file after deployment. To test the functionality, we could create a simple Fusion Web Application. To add our custom component to the consuming application, we can create a file system connection pointing to the location where the jar file is and add it or, add through the project properties of the ViewController project. Now, our custom component has been added to the consuming application. We could test that by creating a VO in the model project with a query like, select 'Faces' as Name,25 as Weight from dual union all select 'ADF', 15 from dual  union all select 'ADFdi', 30 from dual union all select 'BC4J', 20 from dual union all select 'EJB', 40 from dual union all select 'WS', 35 from dual Add this VO to the AppModule, so that it would be exposed to the data control. Then, we could create a jspx page, and add a tree binding to the VO created. We can now see our Tag Cloud declarative component is available in the component palette.  It can be inserted from the component palette to our page and set it's value property to CollectionModel of the tree binding created. Now that we've created the Declarative component and added that to our page successfully, we can run the page to see how it looks. As per the query, the Tags are displayed in different fonts, based on their weight.

    Read the article

  • ARTS Reference Model for Retail

    - by Sanjeev Sharma
    Consider a hypothetical scenario where you have been tasked to set up retail operations for a electronic goods or daily consumables or a luxury brand etc. It is very likely you will be faced with the following questions: What are the essential business capabilities that you must have in place?  What are the essential business activities under-pinning each of the business capabilities, identified in Step 1? What are the set of steps that you need to perform to execute each of the business activities, identified in Step 2? Answers to the above will drive your investments in software and hardware to enable the core retail operations. More importantly, the choices you make in responding to the above questions will several implications in the short-run and in the long-run. In the short-term, you will incur the time and cost of defining your technology requirements, procuring the software/hardware components and getting them up and running. In the long-term, as you grow in operations organically or through M&A, partnerships and franchiser business models  you will invariably need to make more technology investments to manage the greater complexity (scale and scope) of business operations.  "As new software applications, such as time & attendance, labor scheduling, and POS transactions, just to mention a few, are introduced into the store environment, it takes a disproportionate amount of time and effort to integrate them with existing store applications. These integration projects can add up to 50 percent to the time needed to implement a new software application and contribute significantly to the cost of the overall project, particularly if a systems integrator is called in. This has been the reality that all retailers have had to live with over the last two decades. The effect of the environment has not only been to increase costs, but also to limit retailers' ability to implement change and the speed with which they can do so." (excerpt taken from here) Now, one would think a lot of retailers would have already gone through the pain of finding answers to these questions, so why re-invent the wheel? Precisely so, a major effort began almost 17 years ago in the retail industry to make it less expensive and less difficult to deploy new technology in stores and at the retail enterprise level. This effort is called the Association for Retail Technology Standards (ARTS). Without standards such as those defined by ARTS, you would very likely end up experiencing the following: Increased Time and Cost due to resource wastage arising from re-inventing the wheel i.e. re-creating vanilla processes from scratch, and incurring, otherwise avoidable, mistakes and errors by ignoring experience of others Sub-optimal Process Efficiency due to narrow, isolated view of processes thereby ignoring process inter-dependencies i.e. optimizing parts but not the whole, and resulting in lack of transparency and inter-departmental finger-pointing Embracing ARTS standards as a blue-print for establishing or managing or streamlining your retail operations can benefit you in the following ways: Improved Time-to-Market from parity with industry best-practice processes e.g. ARTS, thus avoiding “reinventing the wheel” for common retail processes and focusing more on customizing processes for differentiations, and lowering integration complexity and risk with a standardized vocabulary for exchange between internal and external i.e. partner systems Lower Operating Costs by embracing the ARTS enterprise-wide process reference model for developing and streamlining retail operations holistically instead of a narrow, silo-ed view, and  procuring IT systems in compliance with ARTS thus avoiding IT budget marginalization While parity with industry standards such as ARTS business process model by itself does not create a differentiation, it does however provide a higher starting point for bridging the strategy-execution gap in setting up and improving retail operations.

    Read the article

  • Libgdx 2D Game, Random generated World of random size, how to get mouse coordinates?

    - by Solom
    I'm a noob and English is not my mothertongue, so please bear with me! I'm generating a map for a Sidescroller out of a 2D-array. That is, the array holds different values and I create blocks based on that value. Now, my problem is to match mouse coordinates on screen with the actual block the mouse is pointing at. public class GameScreen implements Screen { private static final int WIDTH = 100; private static final int HEIGHT = 70; private OrthographicCamera camera; private Rectangle glViewport; private Spritebatch spriteBatch; private Map map; private Block block; ... @Override public void show() { camera = new OrthographicCamera(WIDTH, HEIGHT); camera.position.set(WIDTH/2, HEIGHT/2, 0); glViewport = new Rectangle(0, 0, WIDTH, HEIGHT); map = new Map(16384, 256); map.printTileMap(); // Debugging only spriteBatch = new SpriteBatch(); } @Override public void render(float delta) { // Clear previous frame Gdx.gl.glClearColor(1, 1, 1, 1 ); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); GL30 gl = Gdx.graphics.getGL30(); // gl.glViewport((int) glViewport.x, (int) glViewport.y, (int) glViewport.width, (int) glViewport.height); spriteBatch.setProjectionMatrix(camera.combined); camera.update(); spriteBatch.begin(); // Draw Map this.drawMap(); // spriteBatch.flush(); spriteBatch.end(); } private void drawMap() { for(int a = 0; a < map.getHeight(); a++) { // Bounds check (y) if(camera.position.y + camera.viewportHeight < a)// || camera.position.y - camera.viewportHeight > a) break; for(int b = 0; b < map.getWidth(); b++) { // Bounds check (x) if(camera.position.x + camera.viewportWidth < b)// || camera.position.x > b) break; // Dynamic rendering via BlockManager int id = map.getTileMap()[a][b]; Block block = BlockManager.map.get(id); if(block != null) // Check if Air { block.setPosition(b, a); spriteBatch.draw(block.getTexture(), b, a, 1 ,1); } } } } As you can see, I don't use the viewport anywhere. Not sure if I need it somewhere down the road. So, the map is 16384 blocks wide. One block is 16 pixels in size. One of my naive approaches was this: if(Gdx.input.isButtonPressed(Input.Buttons.LEFT)) { Vector3 mousePos = new Vector3(); mousePos.set(Gdx.input.getX(), Gdx.input.getY(), 0); camera.unproject(mousePos); System.out.println(Math.round(mousePos.x)); // *16); // Debugging // TODO: round // map.getTileMap()[mousePos.x][mousePos.y] = 2; // Draw at mouse position } I confused myself somewhere down the road I fear. What I want to do is, update the "block" (or rather the information in the Map/2D-Array) so that in the next render() there is another block. Basically drawing on the spriteBatch g So if anyone could point me in the right direction this would be highly appreciated. Thanks!

    Read the article

  • Where should instantiated classes be stored?

    - by Eric C.
    I'm having a bit of a design dilemma here. I'm writing a library that consists of a bunch of template classes that are designed to be used as a base for creating content. For example: public class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template() { //constructor } public void DoSomething() { //does something } ... } The problem is, not only is the library providing the templates, it will also supply quite a few predefined templates which are instances of these template classes. The question is, where do I put these instances of the templates? The three solutions I've come up with so far are: 1) Provide serialized instances of the templates as files. On the one hand, this solution would keep the instances separated from the library itself, which is nice, but it would also potentially add complexity for the user. Even if we provided methods for loading/deserializing the files, they'd still have to deal with a bunch of files, and some kind of config file so the app knows where to look for those files. Plus, creating the template files would probably require a separate app, so if the user wanted to stick with the files method of storing templates, we'd have to provide some kind of app for creating the template files. Also, this requires external dependencies for testing the templates in the user's code. 2) Add readonly instances to the template class Example: public class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template PredefinedTemplate { get { Template templateInstance = new Template(); templateInstance.Name = "Some Name"; templateInstance.Description = "A description"; ... return templateInstance; } } public Template() { //constructor } public void DoSomething() { //does something } ... } This method would be convenient for users, as they would be able to access the predefined templates in code directly, and would be able to unit test code that used them. The drawback here is that the predefined templates pollute the Template type namespace with a bunch of extra stuff. I suppose I could put the predefined templates in a different namespace to get around this drawback. The only other problem with this approach is that I'd have to basically duplicate all the namespaces in the library in the predefined namespace (e.g. Templates.SubTemplates and Predefined.Templates.SubTemplates) which would be a pain, and would also make refactoring more difficult. 3) Make the templates abstract classes and make the predefined templates inherit from those classes. For example: public abstract class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template() { //constructor } public void DoSomething() { //does something } ... } and public class PredefinedTemplate : Template { public PredefinedTemplate() { this.Name = "Some Name"; this.Description = "A description"; this.Attribute1 = "Some Value"; ... } } This solution is pretty similar to #2, but it ends up creating a lot of classes that don't really do anything (none of our predefined templates are currently overriding behavior), and don't have any methods, so I'm not sure how good a practice this is. Has anyone else had any experience with something like this? Is there a best practice of some kind, or a different/better approach that I haven't thought of? I'm kind of banging my head against a wall trying to figure out the best way to go. Thanks!

    Read the article

  • Drivers for Atheros AR928X?

    - by Pato7
    I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

    Read the article

  • Generic Adjacency List Graph implementation

    - by DmainEvent
    I am trying to come up with a decent Adjacency List graph implementation so I can start tooling around with all kinds of graph problems and algorithms like traveling salesman and other problems... But I can't seem to come up with a decent implementation. This is probably because I am trying to dust the cobwebs off my data structures class. But what I have so far... and this is implemented in Java... is basically an edgeNode class that has a generic type and a weight-in the event the graph is indeed weighted. public class edgeNode<E> { private E y; private int weight; //... getters and setters as well as constructors... } I have a graph class that has a list of edges a value for the number of Vertices and and an int value for edges as well as a boolean value for whether or not it is directed. The brings up my first question, if the graph is indeed directed, shouldn't I have a value in my edgeNode class? Or would I just need to add another vertices to my LinkedList? That would imply that a directed graph is 2X as big as an undirected graph wouldn't it? public class graph { private List<edgeNode<?>> edges; private int nVertices; private int nEdges; private boolean directed; //... getters and setters as well as constructors... } Finally does anybody have a standard way of initializing there graph? I was thinking of reading in a pipe-delimited file but that is so 1997. public graph GenereateGraph(boolean directed, String file){ List<edgeNode<?>> edges; graph g; try{ int count = 0; String line; FileReader input = new FileReader("C:\\Users\\derekww\\Documents\\JavaEE Projects\\graphFile"); BufferedReader bufRead = new BufferedReader(input); line = bufRead.readLine(); count++; edges = new ArrayList<edgeNode<?>>(); while(line != null){ line = bufRead.readLine(); Object edgeInfo = line.split("|")[0]; int weight = Integer.parseInt(line.split("|")[1]); edgeNode<String> e = new edgeNode<String>((String) edges.add(e); } return g; } catch(Exception e){ return null; } } I guess when I am adding edges if boolean is true I would be adding a second edge. So far, this all depends on the file I write. So if I wrote a file with the following Vertices and weights... Buffalo | 18 br Pittsburgh | 20 br New York | 15 br D.C | 45 br I would obviously load them into my list of edges, but how can I represent one vertices connected to the other... so on... I would need the opposite vertices? Say I was representing Highways connected to each city weighted and un-directed (each edge is bi-directional with weights in some fictional distance unit)... Would my implementation be the best way to do that? I found this tutorial online Graph Tutorial that has a connector object. This appears to me be a collection of vertices pointing to each other. So you would have A and B each with there weights and so on, and you would add this to a list and this list of connectors to your graph... That strikes me as somewhat cumbersome and a little dismissive of the adjacency list concept? Am I wrong and that is a novel solution? This is all inspired by steve skiena's Algorithm Design Manual. Which I have to say is pretty good so far. Thanks for any help you can provide.

    Read the article

  • Options for different domain and hosting

    - by Carl
    The situation I have a hosting service (one.com) on which I have installed a wordpress.org site in a subdirectory 'wordpress': myhost.com/wordpress/ (myhost.com is actually my own domain, but it already has contents and I don't want wordpress/ to appear in the root of that domain.) I want to use a second domain for this site. Thinking I would be able to forward to the wordpress site without problems, I registered the domain at GoDaddy.com: mydomain.com What I want So when my visitors type in mydomaind.com, I want them to see the contents on myhost.com/wordpress/, and the same for all subpages (mydomain.com/a/subpage fetches from myhost.com/wordpress/a/subpage). Just a redirect isn't enough, I want my visitors to see only mydomain.com as their domain. Some notes If I set up forward with URL masking at GoDaddy, they just give a full frame, pointing to myhost.com/wordpress/. This isn't good enough for me, since mydomain.com will always show up in the adress bar, also for subpages (I want mydomain/a/subpage to show in the adress bar for a subpage). I believe this could in principle be done with a .htaccess file with URL rewriting, but I have no hosting with GoDaddy so I can't upload such a file there. Hosting with GoDaddy is very expensive (of course) so I don't want to do that. I don't think I can use DNS settings; the host of mydomain.com says they don't allow anyone else to point to their name servers. If possible, I wouldn't want to re-install the wordpress site, it would take quite some time. I'd prefer to keep it at myhost.com/wordpress/ (if possible) Anything involving transferring the domain is supposed to take 5-7 working days. I would need my site up-and-running earlier than that, so I'd like to avoid it if possible. Am I locked in? As it seems, I am rather locked-in with GoDaddy. I can't use the domain with .htaccess since I can't upload such a file (and won't pay for hosting by GoDaddy). I can't use any of their forward options since none of them do what I want (one just forwards, the one that masks the URL does it with frames). Would you agree? Possible solutions Transfer the domain to any hosting service with reasonable hosting pricing, as opposed to GoDaddy (I'd probably use one.com, the same host as for myhost.com, in that case), and there either re-install wordpress on the new account, or use .htaccess with URL rewrite on the new account to fetch the contents from myhost.com/wordpress/. Can this be set-up to work with sub-pages as well? And visitors won't ever see "myhost.com/wordpress", just "mydomain.com"? E.i., mydomain.com/a/subpage/ wold fetch from myhost.com/wordpress/a/subpage/? This might be a long shot but: Find some free (preferrably) hosting allowing to point to their nameservers Make DNS settings at GoDaddy so that my domain appears at the site above at that site, put a .htaccess file with URL rewriting to forward to myhost.com/wordpress/ Could this be possible? What services could I use in that case? As I see it, this would be the only way not to have to transfer a domain (taking 5-7 working days) and not having to re-install the wordpress site. Sorry for the long question. All info and ideas are welcome.

    Read the article

  • MVC Communication Pattern

    - by Kedu
    This is kind of a follow up question to this http://stackoverflow.com/questions/23743285/model-view-controller-and-callbacks, but I wanted to post it separately, because its kind of a different topic. I'm working on a multiplayer cardgame for the Android platform. I split the project into MVC which fits the needs pretty good, but I'm currently stuck because I can't figure out a good way to communicate between the different parts. I have everything setup and working with the controller being a big state machine, which is called over and over from the gameloop, and calls getter methods from the GUI and the android/network part to get the input. The input itself in the GUI and network is set by inputlisteners that set a local variable which I read in the getter method. So far so good, this is working. But my problem is, the controller has to check every input separately,so if I want to add an input I have to check in which states its valid and call the getter method from all these states. This is not good, and lets the code look pretty ugly, makes additions uncomfortable and adds redundance. So what I've got from the question I mentioned above is that some kind of command or event pattern will fit my needs. What I want to do is to create a shared and threadsafe queue in the controller and instead of calling all these getter methods, I just check the queue for new input and proceed it. On the other side, the GUI and network don't have all these getters, but instead create an event or command and send it to the controller through, for example, observer/observable. Now my problem: I can't figure out a way, for these commands/events to fit a common interface (which the queue can store) and still transport different kind of data (button clicks, cards that are played, the player id the command comes from, synchronization data etc.). If I design the communication as command pattern, I have to stick all the information that is needed to execute the command into it when its created, that's impossible because the GUI or network has no knowledge of all the things the controller needs to execute stuff that needs to be done when for example a card is played. I thought about getting this stuff into the command when executing it. But over all the different commands I have, I would need all the information the controller has, and thus give the command a reference to the controller which would make everything in it public, which is real bad design I guess. So, I could try some kind of event pattern. I have to transport data in the event. So, like the command, I would have an interface, which all events have in common, and can be stored in the shared queue. I could create a big enum with all the different events that a are possible, save one of these enums in the actual event, and build a big switch case for the events, to proceed different stuff for different events. The problem here: I have different data for all the events. But I need a common interface, to store the events in a queue. How do I get the specific data, if I can only access the event through the interface? Even if that wouldn't be a problem, I'm creating another big switch case, which looks ugly, and when i want to add a new event, I have to create the event itself, the case, the enum, and the method that's called with the data. I could of course check the event with the enum and cast it to its type, so I can call event type specific methods that give me the data I need, but that looks like bad design too.

    Read the article

  • Setting up your project

    - by ssoolsma
    Before any coding we first make sure that the project is setup correctly. (Please note, that this blog is all about how I do it, and incase i forget, i can return here and read how i used to do it. Maybe you come up with some idea’s for yourself too.) In these series we will create a minigolf scoring cart. Please note that we eventually create a fully functional application which you cannot use unless you pay me alot of money! (And i mean alot!)   1. Download and install the appropriate tools. Download the following: - TestDriven.Net (free version on the bottom of the download page) - nUnit TestDriven is a visual studio plugin for many unittest frameworks, which allows you to run  / test code very easily with a right click –> run test. nUnit is the test framework of choice, it works seamless with TestDriven.   2. Create your project Fire up visual studio and create your DataAccess project:  MidgetWidget.DataAccess is it’s name. (I choose MidgetWidget as name for the solution). Also, make sure that the MidgetWidget.DataAccess project is a c# ClassLibary Hit OK to create the solution. (in the above example the checkbox Create directory for solution is checked, because i’m pointing the location to the root of c:\development where i want MidgetWidget to be created.   3. Setup the database. You should have thought about a database when you reach this point. Let’s assume that you’ve created a database as followed: Table name: LoginKey Fields: Id (PK), KeyName (uniqueidentifier), StartDate (datetime), EndDate (datetime) Table name:  Party Fields: Id (PK), Key (uniqueidentifier, Created (datetime) Table name:  Person Fields: Id(PK),  PartyId (int), Name (varchar) Tablename: Score Fields: Id (PK), Trackid (int), PersonId (int), Strokes (int) Tablename: Track Fields: Id (PK), Name (varchar) A few things to take note about the database setup. I’ve singularized all tablenames (not “Persons“ but “Person”. This is because in a few minutes, when this is in our code, we refer to the database objects as single rows. We retrieve a single Person not a single “Persons” from the database.   4. Create the entity framework In your solution tree create a new folder and call it “DataModel”. Inside this folder: Add new item –> and choose ADO.NET Entity Data Model. Name it “Entities.edmx” and hit  “Add”. Once the edmx is added, open it (double click) and right click the white area and choose “Update model from database…". Now, point it to your database (i include sensitive data in the connectionstring) and select all the tables. After that hit “Finish” and let the entity framework do it’s code generation. Et Voila, after a few seconds you have set up your entity model. Next post we will start building the data-access! I’m off to the beach.

    Read the article

  • Using NSpec at various architectural layers

    - by nono
    Having read the quick start at nspec.org, I realized that NSpec might be a useful tool in a scenario which was becoming a bit cumbersome with NUnit alone. I'm adding an OAuth (or, DotNetOpenAuth) to a website and quickly made a mess of writing test methods such as [Test] public void UserIsLoggedInLocallyPriorToInvokingExternalLoginAndExternalLoginSucceedsAndExternalProviderIdIsNotAlreadyAssociatedWithUserAccount() { ... } ... and I wound up with maybe a dozen permutations of this theme, for the user already being logged in locally and not locally, the external login succeeding or failing, etc. Not only were the method names unwieldy, but every test needed a setup that contained parts in common with a different set of other tests. I realized that NSpec's incremental setup capabilities would work great for this, and for a while I was trucking a long wonderfully, with code like act = () => { actionResult = controller.ExternalLoginCallback(returnUrl); }; context["The user is already logged in"] = () => { before = () => identity.Setup(x => x.IsAuthenticated).Returns(true); context["The external login succeeds"] = () => { before = () => oauth.Setup(x => x.VerifyAuthentication(It.IsAny<string>())).Returns(new AuthenticationResult(true, providerName, "provideruserid", "username", new Dictionary<string, string>())); context["External login already exists for current user"] = () => { before = () => authService.Setup(x => x.ExternalLoginExistsForUser(It.IsAny<string>(), It.IsAny<string>(), It.IsAny<string>())).Returns(true); it["Should add 'login sucessful' alert"] = () => { var alerts = (IList<Alert>)controller.TempData[TempDataKeys.AlertCollection]; alerts[0].Message.should_be_same("Login successful"); alerts[0].AlertType.should_be(AlertType.Success); }; it["Should return a redirect result"] = () => actionResult.should_cast_to<RedirectToRouteResult>(); }; context["External login already exists for another user"] = () => { before = () => authService.Setup(x => x.ExternalLoginExistsForAnyOtherUser(It.IsAny<string>(), It.IsAny<string>(), It.IsAny<string>())).Returns(true); it["Adds an error alert"] = () => { var alerts = (IList<Alert>)controller.TempData[TempDataKeys.AlertCollection]; alerts[0].Message.should_be_same("The external login you requested is already associated with a different user account"); alerts[0].AlertType.should_be(AlertType.Error); }; it["Should return a redirect result"] = () => actionResult.should_cast_to<RedirectToRouteResult>(); }; This approach seemed to work magnificently until I prepared to write test code for my ApplicationServices layer, to which I delegate viewmodel manipulation from my MVC controllers, and which coordinates the operations of the lower data repository layer: public void CreateUserAccountFromExternalLogin(RegisterExternalLoginModel model) { throw new NotImplementedException(); } public void AssociateExternalLoginWithUser(string userName, string provider, string providerUserId) { throw new NotImplementedException(); } public string GetLocalUserName(string provider, string providerUserId) { throw new NotImplementedException(); } I have no idea what in the world to name the test class, the test methods, or even if I should perhaps include the testing for this layer into the test class from my large code snippet above, so that a single feature or user action could be tested without regard to architectural layering. I can't find any tutorials or blog posts which cover more than simple examples, so I would appreciate any recommendations or pointing in the right direction. I would even welcome "your question is invalid"-type answers as long as some explanation is provided.

    Read the article

  • Is changing my job now a wise decision? [closed]

    - by FlaminPhoenix
    First a little background about myself. I am a javascript programmer with 3.8 years of experience. I joined my current company a year and 3 months ago, and I was recruited as a javascript programmer. I was under the impression I was a programmer in a programming team but this was not the case. No one else except me and my manager knows anything about programming in my team. The other two teammates, copy paste stuff from websites into excel sheets. I was told I was being recruited for a new project, and it was true. The only problem was that the server side language they were using was PHP. They were using a popular library with PHP, and I had never worked with PHP before. Nevertheless, I learnt it well enough to get things working, and received high praise from my boss's boss on whichever project I worked on. Words like "wow" , "This looks great, the clients gonna be impressed with this." were sprinkled every now and then on reviewing my work. They even managed to sell my work to a couple of clients and as I understand, both of my projects are going to fetch them a pretty buck. The problem: I was asked to move into a project which my manager was handling. I asked them for training on the project which never came, and sure enough I couldnt complete my first task on the new project without shortcomings. I told my manager there were things I didnt know how to get done in the new project due to lack of training. His project had 0 documentation. I was told he would "take care" of everything relating to those shortcomings. In the meantime, I was asked to switch to another project. My manager made the necessary changes and later told me that the build had "broken" on the production server and that I needed to "test" my changes before saying things were done. I never deployed it on the production server. He did. I never saw / had the opportunity to see the final build before it went to production. He called me for a separate meeting and started pointing fingers at me, but I took full responsibility even if I didnt have to. He later on got on a call with his boss, in my presence, and gave him the impression that it was all my fault. I did not confront him about this so far. I have worked late / done overtime without them asking a lot, but last week, I just got home from work, and I got calls asking me to solve an issue which till then they had kept quiet about even though they were informed about it. I asked my manager why I hadnt been tasked with this when I was in office. He started telling me which statements to put where, as if to mock me, and that this "is hardly an overtime issue" and this pissed me off. Also, during the previous meeting, he was constantly talking highly about his work, at the same time trying to demean mine. In the meantime, I have attended an interview with another MNC, and the interviewers there were fully respectful of my decision to leave my current company. Its a software company, so I can expect my colleagues to know a lot more than me. Im told I can expect their offer anytime this week. My questions: Is my anger towards my manager justified? While leaving, do I tell him that its because of his actions that Im leaving? Do I erupt in anger and tell him that he shouldnt have put the blame on me since he was the one doing the deployment? This is going to be my second resignation to this company. The first time I wanted to resign, I was asked to stay back and my manager promised a lot of changes, a couple of which were made. How do I keep myself from getting into such situations with my employers in the future?

    Read the article

  • HintPath vs ReferencePath in Visual Studio

    - by toasteroven
    What exactly is the difference between the HintPath in a .csproj file and the ReferencePath in a .csproj.user file? We're trying to commit to a convention where dependency DLLs are in a "releases" svn repo and all projects point to a particular release. Since different developers have different folder structures, relative references won't work, so we came up with a scheme to use an environment variable pointing to the particular developer's releases folder to create an absolute reference. So after a reference is added, we manually edit the project file to change the reference to an absolute path using the environment variable. I've noticed that this can be done with both the HintPath and the ReferencePath, but the only difference I could find between them is that HintPath is resolved at build-time and ReferencePath when the project is loaded into the IDE. I'm not really sure what the ramifications of that are though. I have noticed that VS sometimes rewrites the .csproj.user and I have to rewrite the ReferencePath, but I'm not sure what triggers that. I've heard that it's best not to check in the .csproj.user file since it's user-specific, so I'd like to aim for that, but I've also heard that the HintPath-specified DLL isn't "guaranteed" to be loaded if the same DLL is e.g. located in the project's output directory. Any thoughts on this?

    Read the article

  • C++ smart pointers: sharing pointers vs. sharing data

    - by Eli Bendersky
    In this insightful article, one of the Qt programmers tries to explain the different kinds of smart pointers Qt implements. In the beginning, he makes a distinction between sharing data and sharing the pointers themselves: First, let’s get one thing straight: there’s a difference between sharing pointers and sharing data. When you share pointers, the value of the pointer and its lifetime is protected by the smart pointer class. In other words, the pointer is the invariant. However, the object that the pointer is pointing to is completely outside its control. We don’t know if the object is copiable or not, if it’s assignable or not. Now, sharing of data involves the smart pointer class knowing something about the data being shared. In fact, the whole point is that the data is being shared and we don’t care how. The fact that pointers are being used to share the data is irrelevant at this point. For example, you don’t really care how Qt tool classes are implicitly shared, do you? What matters to you is that they are shared (thus reducing memory consumption) and that they work as if they weren’t. Frankly, I just don't undersand this explanation. There was a clarification plea in the article comments, but I didn't find the author's explanation sufficient. If you do understand this, please explain. What is this distinction, and how are other shared pointer classes (i.e. from boost or the new C++ standards) fit into this taxonomy? Thanks in advance

    Read the article

  • What are some good/reputable/widely-used libraries written in VB.NET?

    - by Dan Tao
    Generally speaking, when VB.NET and C# are compared, there is a lot of strong support for C#, accompanied by some bashing of VB.NET until a respected developer comes along and acts as The Voice Of Reason, pointing out that while VB prior to VB.NET had its fair share of issues, VB.NET is really a very strong, fully OOP language that is, feature-wise, right about on par with C# (with the exception of certain things like a full-bodied lamba syntax [pre-VB10] or the yield keyword, as many C# faithfuls are quick to point out). I myself, having written plenty of code in both VB.NET and C#, fall squarely in the "I prefer C#, but don't consider VB.NET any less of a language" camp. However, one thing I have noticed is that when it comes to respected and/or widely-used libraries for .NET, everyting is written in C#. Or at least that's been my impression. This strikes me as a little strange because, aside from the abovementioned sprinkling of nice features (in particular the yield keyword), I tend to view the VB.NET/C# divide as primarily a matter of personal taste. Obviously, plenty of developers prefer C#. But I personally know some developers (good ones) who prefer VB.NET, which would lead me to suspect that surely some libraries (good ones) would be written in VB.NET. They must be out there, and I just haven't found them. What are some good libraries that've been written in VB.NET? The best would be open source, as that would allow interested developers to take a look at some good VB.NET code and see how effective the language can be when used properly. But I'd be interested to know about any libraries at all, particularly reputable ones.

    Read the article

  • XNA vs SlimDX for offscreen renderer

    - by Groky
    Hello, I realise there are numerous questions on here asking about choosing between XNA and SlimDX, but these all relate to game programming. A little background: I have an application that renders scenes from XML descriptions. Currently I am using WPF 3D and this mostly works, except that WPF has no way to render scenes offscreen (i.e. on a server, without displaying them in a window), and also rendering to a bitmap causes WPF to fallback to software rendering. So I'm faced with having to write my own renderer. Here are the requirements: Mix of 3D and 2D elements. Relatively few elements per scene (tens of meshes, tens of 2D elements). Large scenes (up to 3000px square for print). Only a single frame will be rendered (i.e. FPS is not an issue). Opacity masks. Pixel shaders. Software fallback (servers may or may not have a decent gfx card). Possibility of being rendered offscreen. As you can see it's pretty simple stuff and WPF can manage it quite nicely except for the not-being-able-to-export-the-scene problem. In particular I don't need many of the things usually needed in game development. So bearing that in mind, would you choose XNA or SlimDX? The non-rendering portion of the code is already written in C#, so want to stick with that.

    Read the article

  • Can somebody explain the differences, status and future of the various ASP.NET AJAX libraries and to

    - by tjrobinson
    I'm confused about the differences and relationships between the various Microsoft ASP.NET AJAX components/libraries/toolkits and particularly the naming of them. It starts off relatively simple with ASP.NET AJAX itself: ASP.NET AJAX 1.0 (available for ASP.NET 2.0 in a separate package called ASP.NET 1.0 Extensions) ASP.NET AJAX 3.5 (included with ASP.NET 3.5) ASP.NET AJAX 4.0 (included with ASP.NET 4.0) Then come the various projects on CodePlex and elsewhere: ASP.NET AJAX Control Toolkit (aka Original Ajax Control Toolkit) Samples CodePlex It seems that the September 2009 Release is the final release of the Original Ajax Control Toolkit and that it's been superseded by... Ajax Control Toolkit in ASP.NET Ajax Library It looks like the old ASP.NET AJAX Control Toolkit has now become part of a larger ASP.NET Ajax Library but is still maintained seperately on CodePlex. This release is in beta at time of writing so presumably if I want to use the "Control Toolkit" I should stick with the September 2009 Release of the Original ASP.NET AJAX Control Toolkit CodePlex Microsoft Ajax Library Preview Is this the same as the ASP.NET Ajax Library mentioned above just with a confusing name variation? Is the "Control Toolkit" included in Preview 6 and is it older newer or older than the code in Ajax Control Toolkit in ASP.NET Ajax Library? CodePlex Microsoft ASP.NET Ajax Wiki - note the inconsistent insertion of ASP.NET into the name Links to useful articles, roadmaps would be useful.

    Read the article

  • Silverlight WCF netTcpBinding problem

    - by JontyMC
    Trying to call a WCF with a netTcpBinding via Silverlight, I am getting the error: "TCP error code 10013: An attempt was made to access a socket in a way forbidden by its access permissions.. This could be due to attempting to access a service in a cross-domain way while the service is not configured for cross-domain access. You may need to contact the owner of the service to expose a sockets cross-domain policy over HTTP and host the service in the allowed sockets port range 4502-4534." My WCF service is hosted in IIS7, bound to: http://localhost.myserivce.com on port 80 and net.tcp on port 4502 I can see http://localhost.myserivce.com/myservice.svc if I browse to it (my hosts file is pointing this domain to localhost). I can also see http://localhost.myserivce.com/clientaccesspolicy.xml: <?xml version="1.0" encoding="utf-8"?> <access-policy> <cross-domain-access> <policy> <allow-from http-request-headers="*"> <domain uri="*" /> </allow-from> <grant-to> <socket-resource port="4502-4534" protocol="tcp" /> </grant-to> </policy> </cross-domain-access> </access-policy> What am I doing wrong?

    Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >