Search Results

Search found 15646 results on 626 pages for 'port 80'.

Page 123/626 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• Is A Managed Switch With VLAN Support Required

  - by Justin

  Hello, I am wondering if I need to buy a switch which is managed (VLAN support) for my configuration, or will a cheaper unmanaged switch work? I have servers with two NICS each. The first NIC is public and the second NIC is private. The router will plug into the switch port 1 let's say (public). Then server 1 public plugs into port 2 on the switch, and sever 1 private plugs into port 3 on the switch. The public interface is: 192.168.X.X / 255.255.0.0 and the private interface is 10.0.X.X / 255.255.0.0. So looks like: ** SWITCH ** Port Device Network 1 Router/Firewall 192.168.X.X 2 Server 1 Public 192.168.X.X 3 Server 1 Private 10.0.X.X 4 Server 2 Public 192.168.X.X 5 Server 2 Private 10.0.X.X 6 Server 3 Public 192.168.X.X 7 Server 3 Private 10.0.X.X Thanks.

  Read the article

• Data CD for audiobooks?

  - by Marco7757

  I'm trying to burn my .mb4-audiobook files to a CD. I was impressed by the compression-rate (10 hours of audiobook within 150MB?!). The problem now is, that I cannot burn it as an audio CD as these allow only about 80 minutes of audio (audiobook is about +10 hours). I burned them as a data CD now. It works, but, of course, the downside of a data CD is, that not every player (e.g. car, stereo) can play data CDs. What can I do? I don't want to waste 100 CDs on such a simple problem ... is there any way to burn an audio CD? I mean, just regarding the filesize this shouldn't be a problem, shouldn't it? Why is an audio CD only able to play up to 80 minutes?

  Read the article

• Multiple SSL on same IP [closed]

  - by kadourah

  Possible Duplicate: Multiple SSL domains on the same IP address and same port? I have the following situation: first domain: test.domain.com IP: 1.2.3.4 Port: 443 SSL: Purchased from godaddy and specific to that domain Works fine no issues. I would like to add another site: test2.domain.com IP: the same Port: can be different SSL: different since I can't use the SSL above because it's specific to the site above. Now, when I add the HTTPS binding to the second site with IP:Port combination it appears to always load the first SSL ignoring the second certificate. How can I add second SSL binding to the same IP using a "different" certificate? Can this be done?

  Read the article

• Why is there an extra HDD under /dev being added in my Linux Kernel?

  - by user1279156

  I have created a Linux kernel and for some reason an extra drive is always added at bootup. My hard drive is listed as /dev/sdb. /dev/sda is created too, and it is 8 MB in size. I can't find anything in the kernel config that is creating this, but if I use a different kernel it is not there. Kernel logs show it as an attached SCSI device, looks just like my hard drive but only 8 MB, and has no partition table. It also doesn't appear to be a physical device. I've tried the kernel on many different models of PCs and it is always there. Does anyone know how to remove it? /dev/disk/by-id gives me: scsi-1AMCC_U21413034D98EB000584 scsi-1AMCC_U21413034D98EB000584-part1 scsi-353333330000007d0 scsi-SATA_ST3250312AS_5VY7SH42 scsi-SATA_WDC_WD800JD-60L_WD-WMAM9Y085675 scsi-SATA_WDC_WD800JD-60L_WD-WMAM9Y085675-part1 scsi-SATA_WDC_WD800JD-60L_WD-WMAM9Y085675-part2 hdparm -i /dev/sda gives me an "invalid argument". dd if=/dev/sda of=sda.img the resulting file does not have any content sdparm results: /dev/sda: Linux scsi_debug 0004 Device identification VPD page: Addressed logical unit: designator type: T10 vendor identification, code set: ASCII vendor id: Linux vendor specific: scsi_debug 2000 designator type: NAA, code set: Binary 0x53333330000007d0 Target port: designator type: Relative target port, code set: Binary transport: Serial Attached SCSI (SAS) Relative target port: 0x1 designator type: NAA, code set: Binary transport: Serial Attached SCSI (SAS) 0x52222220000007ce designator type: Target port group, code set: Binary transport: Serial Attached SCSI (SAS) Target port group: 0x100 Target device that contains addressed lu: designator type: NAA, code set: Binary transport: Serial Attached SCSI (SAS) 0x52222220000007cd designator type: SCSI name string, code set: UTF-8 transport: Serial Attached SCSI (SAS) SCSI name string: naa.52222220000007CD

  Read the article

• Fresh Apache install can't be connected to

  - by Wayne M

  I've got to be missing something here. I have a brand new CentOS server with a LAMP install on it. My domain host (GoDaddy) has the server's IP address configured as the "A Record". Since the server will host subdomains I have enabled NameVirtualHost and set up a virtual host pointing to the web app on the server. I haven't touched anything else in Apache, and it's listening on Port 80 like it should be. However, I can't connect to the server either by DNS or by IP address. I've set up several servers exactly like this one and never run into this before. What could be causing this? Did someone on the host set up a firewall or something that blocks port 80? As I said, I can't connect to the server via anything, but it's a barebones box with LAMP installed on it.

  Read the article

• ip6tables TPROXY not working

  - by CookieMunster

  I have a problem, I need to have to run a java program on a port < 1024. authbind and jsvc are no alternatives, it is simply decided not to use. But using ip6tables -t mangle -A PREROUTING -p udp --dport 546 -j TPROXY --on-port 8547 gives me ip6tables v1.4.7: unknown option `--on-port' What did I miss? uname -a Linux vieppetat12 2.6.32-71.el6.x86_64 #1 SMP Wed Sep 1 01:33:01 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• IIRF - Redirecting all traffic to the http equivalent

  - by GordonB

  I'm using IIRF and having some trouble getting it to redirect all traffic to the secure version of my sites. So... I have a website with about 20 apps in virtual directories in IIS6. The website takes 80 and 443 traffic. I want to use IIRF to redirect all port 80 traffic EG; http://myserver/app1/page1/param1 http://myserver/app2/ http://myserver To the secure equivalent (https). Here's my config so far; # Iirf.ini # # ini file for IIRF # RewriteLogLevel 1 RewriteLog D:\Websites\Apptemetry\IirfLogs RewriteEngine ON StatusInquiry ON IterationLimit 5 RewriteLogLevel 3 RewriteCond %{HTTPS} off RewriteCond %{SERVER_PORT} ^80$ RedirectRule ^http(.*)$ https$1 Can anyone advise the correct configuration to use, to redirect all traffic?

  Read the article

• ssh can't connect after server ip changed

  - by Kery

  I have a server with ubuntu installed. After I change the network configuration and restart server, ssh client can't connect server any more. But in the server I can use ssh client to connect itself and the netstat command shows that sshd is listening port 22. And in my computer (win7) ping command is OK to server's new IP. The configuration in /etc/network/interfaces is: auto eth0 iface eth0 inet static address 10.80.x.x netmask 255.255.255.0 gateway 10.80.x.1 I'm very confused about this. Hope somebody can give me some idea. Thank you in advance!!!

  Read the article

• IPTables Reroute SSH based on Connection string?

  - by senrabdet

  We are using a cloud server (Debian Squeeze) where public ports on a public IP route traffic to internal servers. We are looking for a way to use IPTables and ssh where based on some part of the ssh connection string (or something along these lines) iptables will reroute the ssh connection to the "right" internal server. This would allow us to use one common public port, and then re-route ssh connections to individual servers. So, for example we hope to do something like the following: user issues ssh connection (public key encryption) such as ssh -X -v -p xxx [email protected] but maybe adds something into the string for iptables to use iptables uses some part of that string or some means to re-route the connection to an internal server using something like iptables -t nat -A PREROUTING ! -s xxx.xxx.xxx.0/24 -m tcp -p tcp --dport $EXTPORT -j DNAT --to-destination $HOST:$INTPORT ....where $HOST is the internal ip of a server, $EXTPORT is the common public facing port and $INTPORT is the internal server port. It appears that the "string" aspect of iptables does not do what we want. We can currently route based on the IP table syntax we're using, but rely on having a separate public port for each server and are hoping to use one common public port and then re-route to specific internal servers based on some part of the ssh connection string or some other means. Any suggestions? Thanks!

  Read the article

• Squid3 not working. Access denied.

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• Troubles doing transparent proxy for virtual machines

  - by Dan H

  Hi iptables gurus. First here is the basic topology: Internet | Gateway | Workstation---eth0---virbr0 | +-----+-----+ | | | vm1 vm2 vm3 I need to test a traffic analyzer running on my workstation, listening on some port (say 8990) on eth0. The rule [I think] I want is "any packets leaving virbr0 going anywhere to port 80 must instead go to port 8990 on eth0". My software running on port 8990 does its own check of the NAT packet mangling to push the packets through after it inspects them. I've been banging my head on this, with different variants of: iptables -t nat -A PREROUTING -i virbr0 -p tcp --dport 80 -j DNAT \ --to 10.0.0.10:8990 And I've tried the more generic method of using the mangle table with --set-mark and ip rule add fwmark, but I'm not getting it. I guess what's confusing me is that everything runs on the same box. Thanks for any guidance.

  Read the article

• Mixed IP and Name Based Virtual Hosts with nginx

  - by nerkn

  I set up many domains but I dont know how to configure if only ip address is given. say foo.com I have a setup to go web/foo.com/htdocs, I want to 88.99.66.55 ip address like a domain to web/fook.com/htdocs server { listen 80; server_name 85.99.66.55; location / { root /home/web/fook.com/htdocs; } location ~ \.(php|php3|php4|php5)$ { root /home/web/fook.com/htdocs; include fastcgi_params; fastcgi_pass 127.0.0.1:9000; } } resulted [warn]: conflicting server name "85.105.65.219" on 0.0.0.0:80, ignored

  Read the article

• No sigal showing on LCD TV when Conects Leptop via VGA Cable

  - by Amit Prajapati

  I am trying to connect my laptop to Samsung LCD TV by VGA TO HDMI cable My Laptop find Samsung tv on display setting. But When I press fn+F7 key my TV display No Signal My laptop specifications are: "Lenovo R61 ThinkPad, Model: 8935AE7 Window7 Ultimate 32 bits 2GB RAM VGA Port available No HDMI Port My TV specification are: Samsung LCD 26 HDMI Port available VGA Port Available I want to know what is problem? When I connect Another Dell Laptop (Window7 32 bit) with HDMI to HDMI cable it work properly. Thanks in Advance!

  Read the article

• Apache VirtualHost, multiple sites. 1 ssl with redirect and 1 regular http

  - by pedalpete

  I've got a server with one site which I am redirecting to https via <VirtualHost *:80> DocumentRoot /var/www/html/secure ServerName secure.com Redirect / https://secure.com </VirtualHost> That works no problem. Now I'm trying to add another non-secure site <VirtualHost *:80> DocumentRoot /var/www/html/notsecure ServerName notsecure.com </VirtualHost> of course, because the redirect is on '/', all sites are getting redicted. I've tried changing the Redirect to the full document root, but no luck.

  Read the article

• output redirection not happening completely

  - by Gaurav

  I am running the following command on ubuntu 12.04 bash shell: hping3 -S -p 80 -c 30 www.google.com >> outputfile.txt But the problem is that this leaves some lines in the end and doesn't copy in the file. I even tried hping3 -S -p 80 -c 30 www.google.com >> outputfile.txt 2>&1 It also gives same problem. However this works perfect: ping -c 30 www.google.com >> outputfile.txt Any idea about what I might be missing?

  Read the article

• Outlook '10 hangs often, IMAP sync

  - by user23150

  We have 3 employees using IMAP to sync with their Desktop and Android Phones. Two are using 70% of their accounts storage, another is using 80%. They all have similar counts on folder structure, etc. The employee with the 80% storage is constantly having Outlook freeze on them for up to 5 minutes at a time. I realize this is Outlook connecting and doing activity on the server, but no one else has this problem. In fact, one user with the 70% storage used uses a very slow laptop, and doesn't have freezing issues. The network is the same, the settings are the same - at a loss how to proceed? Obviously "Outlook is a crummy IMAP client" doesn't help management...

  Read the article

• Starting Apache through XAMPP is not working

  - by nogamo

  I've checked the error logs for this particular problem and it seems no access can be made to port 80. (OS 10013)An attempt was made to access a socket in a way forbidden by its access permissions. : make_sock: could not bind to address [::]:80 Turning the Windows firewall off didn't work, so I'm a bit lost. All of this is running on my laptop so I don't have my own "server" per se but I was under the impression that this would work without the need for one independent of my own personal computer. How would I solve this?

  Read the article

• HAproxy to web host sub directory?

  - by daemonza

  Hi for reasons outside my control, I need to load balance two servers, that run a non-virtual host enabled app on IIS. Normally in HAProxy I would load balance servers(apache, tomcat, etc) like this : acl is_www_example_com hdr_end(host) -i www.example.com use_backend www_example_com if is_www_example_com backend www_example_com balance roundrobin cookie SERVERID insert nocache indirect option httpchk HEAD / HTTP/1.0 option httpclose option forwardfor server node1 192.168.1.1:80 cookie node1 server node1 192.168.1.2:80 cookie node1 Which will route to the node 1 and node 2 server and serve up the virtual host site. if I need to route to www.example.com/application/data How would I be able to do it, with the above example, if at all even possible?

  Read the article

• Proxy between data centers [closed]

  - by dstarh

  Possible Duplicate: Can IIS be configure to forward request to another web server? We are switching data centers (actually datac-center to EC2 to be specific) and some customers have not yet made DNS changes to point the domains to the new load balancers. We are thinking of leaving the existing servers up and just using a proxy server to forward the request to the new load balancer. Can anyone recommend a good proxy server for doing this I've got squid installed but it seems it's fairly easy to just have a fairly wide open proxy server and we don't want this. I want all requests coming in on port 80 to be sent to port 80 at a specific domain (elastic load balancer) the data center env is windows 2k3 and the EC2 env will all be linux but the ec2 env should be irrelevant

  Read the article

• FTP timeout but SSH is working?

  - by nmarti

  I have a problem in my server, when I try to connect via FTP to a domain, the connexion is VERY slow, and I get timeouts just listing files in a directory. When I try to connect to the domain folder using the root user account via SSH, it works fine, and I can download the files without problem. What can be wrong? I tried to reboot the server, also the office router, and nothing... It is a fedora core 7 server with proftpd. Can it be a filesystem problem? Thanks. CONNECTION LOG: Cmd: MLST about.php 250: Start of list for about.php modify=20120910092528;perm=adfrw;size=2197;type=file;UNIX.group=505;UNIX.mode=0644;UNIX.owner=10089; about.php End of list Cmd: PASV 227: Entering Passive Mode (***hidden***). Data connection timed out. Falling back to PORT instead of PASV mode. Connection falling back to port (PORT) mode. Cmd: PORT ***hidden*** 200: PORT command successful Cmd: RETR about.php Could not accept a data connection: Operation timed out.

  Read the article

• wamp remote access

  - by user1589779

  I have a wamp server (Version 2.2 on Windows 7) running on my computer that works perfectly well for localhost access. But now, I need to grant access to a collegue on the same subnetwork. How to achieve that? My collegue receives a 403 error from the browser. I have 2 vhost : <VirtualHost *:80> ServerName localhost DocumentRoot "D:/Workspace" </VirtualHost> <VirtualHost *:80> ServerName oscar DocumentRoot "D:/Workspace/SMACS3/web/htdocs" </VirtualHost>

  Read the article

• How to make your apache application accessible within network

  - by guest

  I have a Windows XP machine where I have installed WAMP and made a PHP based web application. I can access the web application from within this machine by using the browser and pointing to: http://localhost/myApp/ --- and the page loads fine. Now I want this site (http://localhost/myApp) to be accessible to all machines within the network (and may be later, to the general public as well). I am quite new to this, how do I make my site accessible to all machines within the network and to the general public in the internet? I tried modifying the httpd.conf file in Apache (WAMP) by changing Listen 80 to Listen 10.10.10.10:80 (where I replaced 10.10.10.10 with the actual IP of this windows xp machine). I also tried "Put Online" feature in WAMP. None seem to work though. How do I make it accessible?

  Read the article

• Easiest method of creating multiple Word documents with incremental number?

  - by DakotaDusty

  I need to create about 80 Word documents that are identical except for a numerical identifier in the document. The identifier is the same as the document filename, eg. the document named "SN-100.doc" must have the string "SN-100" inside the document text. Each unique document will reside in a folder location given by its unique numerical identifier.For example, the file directory hierarchy will look something like this: /SN001/SN-1.doc /SN002/SN-2.doc . . . /SN080/SN-80.doc What is the easiest and fastest method of doing this?

  Read the article

• EC2: map multiple applications to different domains

  - by EsseTi

  i'm playing with EC2 and i've been able to create my instance that has a django appliacation on port 80, and a tomcat on 8080. now, with elastic IP i can manage to redirect my domain to django application. now i would like to map subdomains to each tomact applications. for example django app (ec2...:80) --> mydomain.com tomcat (ec2...:8080) --> tomcat.mydomain.com webbapp1 (ec2...:8080/webapp1/) --> webapp1.mydomain.com is this possible with the free account? ciao

  Read the article

• Installing CURL on Ubuntu Karmic

  - by Racertim

  Trying to get this up and running: https://github.com/cloudnull/massupload I have everything except CURL installed and when I attempt to, it fails with the following: Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: curl 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 196kB of archives. After this operation, 311kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! curl Install these packages without verification [y/N]? y Err http://us.archive.ubuntu.com karmic/main curl 7.19.5-1ubuntu2 404 Not Found [IP: 91.189.91.13 80] Failed to fetch http://us.archive.ubuntu.com/ubuntu/pool/main/c/curl/curl_7.19.5-1ubuntu2_i386.deb 404 Not Found [IP: 91.189.91.13 80] Thank you!

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >