Search Results

Search found 4834 results on 194 pages for 'nsswitch conf'.

Page 124/194 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

  • can not connect via SSH to a remote Postgresql database

    - by tartox
    I am trying to connect via pgAdmin3 GUI to a Postgresql database on a remote server myHost on port 5432. Server side : I have a Unix myUser that match a postgresql role. pg_hba.conf is : local all all trust host all all 127.0.0.1/32 trust Client side : I open an ssh tunnel : ssh -L 3333:myHost:5432 myUser@myHost I connect to the server via pgAdmin3 ( or via psql -h localhost -p 3333 ). I get the following error message : server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request. I have tried to access a specific database with the superuser role using psql -h localhost -p 3333 --dbname=myDB --user=mySuperUser with no more success. What did I forget in the setup ? Thank you

    Read the article

  • Gnome 3 - Unable to change date and time

    - by Chris Harris
    I am running Arch Linux with Gnome 3. Unfortunately, although my time and date settings in /etc/rc.conf show that HARDWARECLOCK='UTC' and TIMEZONE='America/LosAngeles'. I continue to get the timezone of Europe/London. If I try to change the date and time via the GUI. It requires root access. After authorizing root access, the date and time may be changed; however, after closing the GUI window, it automatically reverts back to the previous incorrect timezone. I am able to use pool.ntp.org in order to sync my time to the correct one; however, this works only for the current session and is not fixed. This solution is inconvenient since there is not always network access. What other solutions are available for this problem?

    Read the article

  • how do I set up a virtual host (it's not working, and I've done everything right)

    - by piratepartypumpkin
    My router redirects port 80 to port 8080. My router works fine and my domain name is routed properly. This is my virtual hosts file: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /home/admins/lampstack-5.3.16-0/apps/wordpress ServerName example.com ServerAlias www.example.com </VirtualHost> I can access my website by entering "mywebsite.com:8080" but I cannot access it by entering "mywebsite.com" For further information, this is a part of my httpd.conf: Listen 8080 Servername localhost:8080 DocumentRoot "/home/admins/lampstack-5.3.16-0/apache2/htdocs <Directory /> Options FollowSymLinks AllowOverride None Order deny, allow deny from all </Directory> <Directory "/home/admins/lampstack-5.3.16-0/apache2/htdocs"> Options FollowSymLinks AllowOverride None Order allow, deny allow from all </Directory>

    Read the article

  • OpenVPN - client-to-client traffic working in one direction but not the other

    - by Pawz
    I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

    Read the article

  • vsftpd with pam_winbind.so

    - by David
    I'm trying to setup vsftpd to use logins from our domain. I want the ftp users to be able to login using their active directory username/password and have be able to have full access to /media/storage/ftp/username. I setup pptp using winbind and it is working fine, so I belive the issue is with vsftpd and pam. The ftp server runs and gives 530 for the login. I turned on debug for the pam module, but I see nothing in the syslog. Vsftp only logs a wrong login in its log. /etc/pam.d/vsftpd auth required pam_winbind.so debug /etc/vsftpd.conf listen=YES listen_ipv6=NO connect_from_port_20=YES anonymous_enable=NO local_enable=YES write_enable=YES xferlog_enable=YES idle_session_timeout=600 data_connection_timeout=120 nopriv_user=ftp ftpd_banner=Welcome to Scantiva! Authorized access only! local_umask=022 local_root=/media/storage/ftp/$USER user_sub_token=$USER chroot_local_user=YES secure_chroot_dir=/var/run/vsftpd/empty pam_service_name=vsftpd guest_enable=YES guest_username=ftp ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=NO force_local_logins_ssl=NO ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES rsa_cert_file=/etc/ssl/private/vsftpd.pem

    Read the article

  • How to make nginx only respond to one domain?

    - by larryzhao
    I am pretty new to nginx, I host my rails application on nginx+passenger. I want my website to be accessible to only one domain. So I set my nginx conf like the following: server { listen 80; server_name mydomain.com www.mydomain.com; root /var/deploy/myapp/current/public; passenger_enabled on; location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires 1y; add_header Cache-Control public; } } I specify the server_name directive, but still, it answers anything which points to this IP and I could see that in the access.log that it answers to other domain names. Is there anything I am doing wrong?

    Read the article

  • Practical tips when transitioning to xmonad?

    - by meder
    I like the idea and concept of xmonad, however I still keep going back to gnome after an hour or so. This feels like when I first tried to learn vim, but I've gotten past the learning curve point and can't live without vim nowadays. I'm sure the time will come for xmonad too, but I was wondering if current xmonad users can provide transitional tips? FYI, I'm on dual monitors ( 19 inch and 17 inch ). Example of an issue I'm having while in this "transitional" stage: How do you manage keeping the browser and other programs that are most commonly used in full screen mode, since by default I think it opens up in a small tile that takes up a portion of the screen? Do you just shortcut it to make it open full screen, or do you actually not maximize it? Or are there advanced methods through preferences in the conf file, making certain programs take up X space?

    Read the article

  • Different graphic cards drivers while booting from external media

    - by goran
    I am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between: nvidia proprietary driver ati proprietary driver generic driver Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers). What would be the steps to make this (semi-)automatic and avoid restarting X?

    Read the article

  • rsyslog forward all except ldap

    - by Brian
    I have Centos 6 servers running openLDAP. In the rsyslog.conf, I forward the logs to my central server with this line: *.* @10.10.10.10:514 openldap seems incredibly chatty. I have 3 servers in a multi-master cluster. Those 3 servers generate twice as many logs as my other 80 servers combined. I have been unsuccessful in figuring out how to tell openLDAP to use a sensible log level. (we never specifically set the log level) Since these are my main authentication sources, I'm a bit hesitant to "play around" with them. Is there a way to tell rsyslog to forward everything EXCEPT LOCAL4?

    Read the article

  • Making python run on my webserver

    - by richzilla
    Hi all, im getting a bit stuck regarding options for running python scripts on my server. From the research ive done so far, i can see i need to modify apache slightly to run python scripts, by using either mod_wsgi or mod_python. Two issues i have: mod_python doesnt appear to be maintained anymore (last release, 2007) mod_wsgi appears to require modification of my httpd.conf file on a per application basis. What im wanting to know, is there a way of getting python scripts to run in the same way as php, i.e. just by going to index.py etc... or is it more involved than that? At present im just trying to set it up on my xampp install. Any help would be appreciated.

    Read the article

  • Install multiple PHP environments on OS X Snow Leopard

    - by Darren Newton
    I just upgraded my MBP to Snow Leopard (OS X 10.6), which took PHP to 5.3 This is great, except I use my MBP as my development machine and I use a lot of PHP libs and frameworks (namely CakePHP 1.2) which are not compatible at the moment with PHP 5.3. CakePHP in particular does not have a stable version for PHP 5.3 so its not a matter of upgrading the framework (and the production servers are under PHP 5.2 anyway.) Is there a way to install PHP 5.2.9 alongside PHP 5.3 and then using httpd.conf or .htaccess tell Apache which version of PHP to use for a particular directory? Alternatively is there a way to do this with MacPorts? Thanks!

    Read the article

  • Ubuntu: move logs from /dev/tty8 to different terminal /dev/tty12 or get rid of it.

    - by Casual Coder
    I want to know how to move or get rid of /dev/tty8 log output in Ubuntu 9.10. /dev/tty7 is my regular X session. When I am switching user to test account where I can try and test setups and configs I am at next available console i.e. /dev/tty9 because /dev/tty8 is taken by log output. Where can I configure this ? All I've found related to /dev/tty8 is commented lines in /etc/rsyslog.d/50-default.conf. I changed it like that: daemon,mail.*;\ news.=crit;news.=err;news.=notice;\ *.=debug;*.=info;\ *.=notice;*.=warn /dev/tty12 And I've got nice log output on /dev/tty12 but where is configuration for log output on /dev/tty8. How can I change it?

    Read the article

  • How do I make virtual host DirectoryIndex file appear in the url?

    - by Bob Flemming
    I have setup a virtual host which specifies a default file to load when the URL is called. The problem I have is that I need that default DirectoryIndex file to appear in the URL. So when I go to: www.mysite.co.uk, I want www.mysite.co.uk/app.php to appear in the URL. How can I achieve this using my virtual host configuration within my apache.conf file? Here is my current code: <VirtualHost *:80> ServerName *.mysite.co.uk DocumentRoot "/var/www/html/mysite/web/" DirectoryIndex app.php </VirtualHost>

    Read the article

  • Avoid Apache's mod_status being exposed by Varnish

    - by Peteris Caune
    An Ubuntu 9.04 box running Apache on 8080 and Varnish on 80. Recently set up Munin and was wondering why Apache graphs are empty. Saw from the logs that Munin is accessing /server-status?auto and getting 403 Forbidden back. So I edited /etc/apache2/monds-enabled/status.conf to allow access from 127.0.0.1. But doing this actually made /server-status public, since requests coming through Varnish appear to come from 127.0.0.1 too. So the question is, how do I configure mod_status to be accessible only by munin-node and not by Varnish?

    Read the article

  • Apache mod_proxy to another server

    - by trobrock
    I am using the proxy_balancer in Apache2 to proxy requests to a Rails application to my rails server on the port the application is running on. This is how its set up... Rails Server Mongrel running on port 8000, when accessing the url directly to http://rails_server:8000 the site loads fine Apache Server Conf file for the site: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName myserver.com ServerAlias application.myserver.com <Proxy balancer://application_cluster> Allow from localhost BalancerMember http://ip.to.server:8000 retry=10 </Proxy> ProxyPass / balancer://application_cluster </VirtualHost> The problem I am having is going to http://rails_server:8000 works fine, but going to http://application.myserver.com Loads the right content, but is displaying all the HTML as text and not rendering it as html

    Read the article

  • Not able to connect to internet in RHEL 5

    - by chankey007
    I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

    Read the article

  • Not able to connect to internet in RHEL 5

    - by chankey007
    I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

    Read the article

  • Computer sending data while turned of

    - by Nicklas Ansman
    I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas

    Read the article

  • Can't access individual samba shares

    - by Richard Maddis
    I've just installed CentOS and I'm configuring Samba. I have a share with the following in the smb.conf file: [storage] comment = Main storage for all use path = /share public = yes browseable = yes writable = yes printable = no write list = bob root create mask = 0775 guest ok = yes available = yes In Windows Explorer, I can reach the page listing all the shares on the server, but I click on the shares themselves, I get an error saying that the folder cannot be found. I have verified that the folder /share exists and I've also given it 777 permissions so it cannot be due to permissions. What is causing this? I can post more config files if necessary.

    Read the article

  • Cannot enable cron logs on Ubuntu 10.04

    - by Patrick
    I've just the following commands on Ubuntu 10.04 in order to enable cron logs. But I still don't see the file /var/logs/cron. 1. Edit /etc/syslog.conf and uncomment the line starting with cron.* 2. sudo /etc/init.d/sysklogd restart 3. sudo /etc/init.d/cron restart (I've also tried sudo service cron restart). What am i missing to do ? Also, I would like to know how can I run cron manually and not just start the service. thanks

    Read the article

  • Setup CENTOS Centralized AUDIT and RSYSLOG server

    - by Warron.French
    Attempting to use these links: Sending audit logs to SYSLOG server or http://wiki.rsyslog.com/index.php/Centralizing_the_audit_log I have been unable to get centralized AUDIT logging to work on my ALL-CentOS network environment. I have 6 workstations dt1...dt6, and the log files are not generated at all and I cannot tell if the messages are being sent from these workstations: dt1..dt6 over to the server (srv1). I have configured the rsyslog.conf on the workstations as shown in the link: Sending audit logs to SYSLOG server, and add the additional touches for generating the logfiles into a separate directory per YEAR/MONTH/DAY (using proper syntax) and into separate HOSTNAME-based_audit.log files. Note: RSYSLOG messaging does appear to work from the workstations over to the server, but the audit logging portion is not working. I am running CentOS-6.5 with RPMs: audit-2.2-4.el6_5.x86_64, audit-libs-2.2-4.el6_5.x86_64, and rsyslog-5.8.10-8.el6.x86_64 I have gotten zero responses from wiki.rsyslog.com and really need this to work. If needed I can send files of one of my workstations and the server to aid in the process. Thanks, Warron

    Read the article

  • Installing Bugzilla on Ubuntu 9.04 and Plesk

    - by makeflo
    Hey guys. I'm trying to install the latest Bugzilla version on my ubuntu server. (Want to use a subdomain like bugs.domain.com) I already installed all necessary perl modules and check_modules.pl doesn't show any errors. But when I'm running the testserver.pl script I get the following: TEST-OK Webserver is running under group id in $webservergroup TEST-FAILED Fetch of images/padlock.png failed I'm also not able to visit ANY file within the bugzilla folder from the browser. I'm always getting a 404 error. The bugzilla folder and all containing files are set to apache as the owner. I tried to enter the apache configuration form the installation guide in the http.include file of the domain and in the vhosts.conf file of the subdomain as well. I don't know what to do... Playing with plesks' suexecgroup doesn't bring any solution... I hope you can help me! Thanks in advance!

    Read the article

  • Route multiple subdomains on one external ip to multiple internal ips

    - by Abenil
    i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

    Read the article

  • How to configure Apache for PHP on Windows 7?

    - by salim cobra
    I have installed Apache 2.0(httpd-2.0.64-win32-x86-no_ssl) and it works, then I have installed Php5.3 and it pointed to Apache configuration folder. failed scenario: 1- create simple test.php, put in under C:\Apache\Apache2\htdocs 2- call "http://localhost:8080/test.php" -- "Bad Request..Your browser sent a request that this server could not understand." Proposed solution by NetBeans blog (failed) 1-add those two lines to httpd.conf AddType Application/x-httpd-php .php LoadModule php5_module "c:/php/sapi/php5apache2_2.dll" It doesnt works because there is no "php5apache2_2.dll" under my Php installation folder?? I have such .dll : php5ts.dll, ssleay32.dll,.. Any one have any suggestion in order to run the PHP script successfully?

    Read the article

  • Apache virtual host documentroot in other folders

    - by giuseppe
    I am trying to set up a couple ov VritualHost in my Apache, but I would like to put the DocumentRoot of these virtual host on folders outside the basic www folder. It happens that I get alwasy "Permission Denied". My httpd.conf follows: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /home/giuseppe/www ServerName www.example.com/www ErrorLog logs/host.www.projects-error_log CustomLog logs/dummy-host.example.com-access_log common <Directory "/home/giuseppe/www"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /home/developper ServerName www.example.com ErrorLog logs/host.developper-error_log CustomLog logs/dummy-host.example.com-access_log common </VirtualHost>

    Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >