Search Results

Search found 5005 results on 201 pages for 'products'.

Page 124/201 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

  • Inside Red Gate - Introduction

    - by Simon Cooper
    I work for Red Gate Software, a software company based in Cambridge, UK. In this series of posts, I'll be discussing how we develop software at Red Gate, and what we get up to, all from a dev's perspective. Before I start the series proper, in this post I'll give you a brief background to what I have done and continue to do as part of my job. The initial few posts will be giving an overview of how the development sections of the company work. There is much more to a software company than writing the products, but as I'm a developer my experience is biased towards that, and so that is what this series will concentrate on. My background Red Gate was founded in 1999 by Neil Davidson & Simon Galbraith, who continue to be joint CEOs. I joined in September 2007, and immediately set to work writing a new Check for Updates client and server (CfU), as part of a team of 2. That was finished at the end of 2007. I then joined the SQL Compare team. The first large project I worked on was updating SQL Compare for SQL Server 2008, resulting in SQL Compare 7, followed by a UI redesign in SQL Compare 8. By the end of this project in early 2009 I had become the 'go-to' guy for the SQL Compare Engine (I'll explain what that means in a later post), which is used by most of the other tools in the SQL Tools division in one way or another. After that, we decided to expand into Oracle, and I wrote the prototype for what became the engine of Schema Compare for Oracle (SCO). In the latter half of 2009 a full project was started, resulting in the release of SCO v1 in early 2010. Near the end of 2010 I moved to the .NET division, where I joined the team working on SmartAssembly. That's what I continue to work on today. The posts in this series will cover my experience in software development at Red Gate, within the SQL Tools and .NET divisions. Hopefully, you'll find this series an interesting look at what exactly goes into producing the software at Red Gate.

    Read the article

  • SQL SERVER – Standards Support, Protocol, Data Portability – 3 Important SQL Server Documentations for Downloads

    - by pinaldave
    I have been working with SQL Server for more than 8 years now continuously and I like to read a lot. Some time I read easy things and sometime I read stuff which are not so easy.  Here are few recently released article which I referred and read. They are not easy read but indeed very important read if you are the one who like to read things which are more advanced. SQL Server Standards Support Documentation The SQL Server standards support documentation provides detailed support information for certain standards that are implemented in Microsoft SQL Server. Microsoft SQL Server Protocol Documentation The Microsoft SQL Server protocol documentation provides technical specifications for Microsoft proprietary protocols that are implemented and used in Microsoft SQL Server 2008. Microsoft SQL Server Data Portability Documentation The SQL Server data portability documentation explains various mechanisms by which user-created data in SQL Server can be extracted for use in other software products. These mechanisms include import/export functionality, documented APIs, industry standard formats, or documented data structures/file formats. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • MySQL Connect Content Catalog Live

    - by Bertrand Matthelié
    The MySQL Connect Content Catalog is now live and you can check out the great program the content committee put together for you. We received a lot of very good submissions during the call for papers and we’d like to thank you all again for those, it was a very difficult job to choose. Overall MySQL Connect will in two days include: Keynotes, with speakers such as Oracle Chief Corporate Architect Edward Screven and Vice President of MySQL Engineering Tomas Ulin 66 conference sessions, enabling you to hear from: Oracle engineers on MySQL 5.6 new features, InnoDB, performance and scalability, security, NoSQL, MySQL Cluster…and more MySQL users and customers including Facebook, Twitter, PayPal, Yahoo, Ticketmaster, and CERN Internationally recognized MySQL community members and partners on topics such as performance, security or high availability 6 Birds-of-a-feather sessions, in which you’ll be able to engage into passionate discussions about replication, backup and other subjects, and help influence the MySQL roadmap 8 Hands-On Labs designed to give you hands-on experience about MySQL replication, MySQL Cluster, the MySQL Performance Schema…and more Demo pods about MySQL Workbench, MySQL Cluster, MySQL Enterprise Edition and other technologies and services We’ll also have networking receptions on both Saturday and Sunday evening, enabling you to discuss with the Oracle engineers developing and supporting the MySQL products, as well as with other users and customers. Additionally, you’ll have the opportunity to meet and learn from our partners in the exhibition hall. Some of the MySQL Connect speakers such as Henrik Ingo and Andrew Morgan have already blogged about their presence at MySQL Connect, and you can find more information about their sessions or their thoughts about the conference in their blogs. We also published an interview with Tomas Ulin a few weeks ago. In summary, don’t miss MySQL Connect! And you only have about 3 weeks left to register with the early bird discount and save US$500. Don’t wait, Register Now! Interested in sponsorship and exhibit opportunities? You will find more information here.

    Read the article

  • Subaru CIO wins SIM Leadership Award

    - by tony.berk
    Congratulations to Brian Simmermon, CIO at Subaru of America, Inc., for winning the Society for Information Management's (SIM) fifth annual SIM Leadership Award. Simmermon joined Subaru of America in 2005 as Chief Information Officer. Simmermon then performed a company-wide technology assessment and determined that the business ran a large collection of applications, many of which duplicated functionality. Establishing the mantra, "Simplicity, Flexibility, and Cost Effectiveness", he reduced the total number of applications, moved to a small core set of systems - including Oracle and Siebel. Tom Doll, COO for Subaru of America said, "We are very pleased Brian has been recognized. He has consistently shown vision and leadership and under his leadership, our technology group's innovations have helped our sales to grow to record levels, regardless of the economic circumstances." Simmermon's technology group's aggressive business deliverables have helped Subaru to become one of the most successful brands in the US with the brand reaching record sales in both 2009 and 2010. Click here to read the full press release. Click here to learn about Subaru's success with Oracle products. Congratulations Brian!

    Read the article

  • FotoJeff.com | My Photography Blog

    - by Jeff Julian
    I have been recently been doing more photography and Flickr was only allowing me to do so much with the images in displaying them.  No customization of skin, no page grouping, no post like pages.  So I decided to host a WordPress blog to host my images.  I really wanted to try WordPress to see what features single-hosted blog products offer that our multiple-hosted blog system could take advantage of.  So far the product is very cool, I can see how such a large developer network would help produce such cool “apps” for WP.  The product makes if very easy to make changes to your hosted environment that would be a little scary for a multiple blog host.  I need to compare features for their hosted solution. Any who, FotoJeff.com is my new photography blog home.  I have been working with the Kansas City Rescue Mission a lot lately so most of my shots are for them. FotoJeff.com – Photography Blog of Jeff Julian My hope is to make this blog again my technology blog, Staff of Geeks our Geekswithblogs.net announcement blog and FotoJeff.com my photography blog.  I need to start dog fooding my thoughts on blogging and keep the noise down (by making more noise with this post :D). Technorati Tags: FotoJeff.com,Photography,Blogs,Geekswithblogs

    Read the article

  • CRM@Oracle Series: CRM Analytics

    - by tony.berk
    What is the most important factor that leads to a successful CRM deployment? Is it the overall strategy, strong governance, defined processes or good data quality? Well, it's definitely a combination of all these, but the most important differentiator from our experience is Business Intelligence. Business Intelligence or Analytics is commonly mentioned as a key aspect to successful CRM and other enterprise deployments. The good news is that Oracle provides pre-built analytics dashboards, which provide real-time, actionable insight, and tools to build custom analyses. However, success with analytics, especially in a large enterprise, still requires a strong strategy, clean data for analysis, and performance. Today's CRM@Oracle slidecast covers Oracle's strategy, architecture and key success factors for deploying CRM Analytics internally at Oracle. CRM@Oracle: CRM Analytics Click here to learn more about Oracle CRM products and here to learn about Oracle Business Intelligence Applications. Have you read our other postings in the CRM@Oracle Series? If you have a particular CRM area or function which you'd like to hear how Oracle implemented it internally, post a comment and we'll get it on our list.

    Read the article

  • What is the definition of "Big Data"?

    - by Ben
    Is there one? All the definitions I can find describe the size, complexity / variety or velocity of the data. Wikipedia's definition is the only one I've found with an actual number Big data sizes are a constantly moving target, as of 2012 ranging from a few dozen terabytes to many petabytes of data in a single data set. However, this seemingly contradicts the MIKE2.0 definition, referenced in the next paragraph, which indicates that "big" data can be small and that 100,000 sensors on an aircraft creating only 3GB of data could be considered big. IBM despite saying that: Big data is more simply than a matter of size. have emphasised size in their definition. O'Reilly has stressed "volume, velocity and variety" as well. Though explained well, and in more depth, the definition seems to be a re-hash of the others - or vice-versa of course. I think that a Computer Weekly article title sums up a number of articles fairly well "What is big data and how can it be used to gain competitive advantage". But ZDNet wins with the following from 2012: “Big Data” is a catch phrase that has been bubbling up from the high performance computing niche of the IT market... If one sits through the presentations from ten suppliers of technology, fifteen or so different definitions are likely to come forward. Each definition, of course, tends to support the need for that supplier’s products and services. Imagine that. Basically "big data" is "big" in some way shape or form. What is "big"? Is it quantifiable at the current time? If "big" is unquantifiable is there a definition that does not rely solely on generalities?

    Read the article

  • The Worst of CES (Consumer Electronics Show) in 2011

    - by Justin Garrison
    This year, How-To Geek’s own Justin was on-site at the Consumer Electronics Show in Las Vegas, where every gadget manufacturer shows off their latest creations, and he was able to sit down and get hands-on with most of them. Here’s the ones that just didn’t make the cut. Make sure you also read our Best of CES 2011 post, where we cover the greatest gadgets that we found. Keep reading to take a look at the best of the worst products, that might have initially appeared good but showed their true colors after we spent some time with them Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Arctic Theme for Windows 7 Gives Your Desktop an Icy Touch Install LibreOffice via PPA and Receive Auto-Updates in Ubuntu Creative Portraits Peek Inside the Guts of Modern Electronics Scenic Winter Lane Wallpaper to Create a Relaxing Mood Access Your Web Apps Directly Using the Context Menu in Chrome The Deep – Awesome Use of Metal Objects as Deep Sea Creatures [Video]

    Read the article

  • "Has Oracle written the script for CRM success?" - Anthony Lye on Customer Experience at BAFTA

    - by Richard Lefebvre
    Anthony Lye showcased Oracle Fusion CRM at a BAFTA gathering, and MyCustomer.com covered the story under the title of "Has Oracle written the script for CRM success?' According to MyCustomer.com, "Oracle's SVP of CRM Anthony Lye set the scene for the event, suggesting products are becoming commoditized, so that the only way to differentiate is through the relationship with the customer. But he warned that "customers are more and more in control of that relationship, so you have to provide great experiences for them." "The quickest win within your organization to create a single view is to connect your marketing organization with your selling organization, align goals, processes, people and technology," Anthony explained.   "And this is a transition that is already happening - "VPs of marketing have started turning up in the same meetings as VPs of sales, we have started to see that they want to work together" - but this convergence needs nurturing." "In Fusion there are capabilities to align the organisation - we enable marketing on the same platform to build campaigns connected to sales stages. It can affect leads and opportunities at the top end of the funnel. And the selling organisation can take advantage of marketing content - the materials that are exclusively within marketing can now be used by sales. Your sales teams have been campaigning forever, but it's usually by email, it isn't aligned with the corporate message and it's being sent to people it shouldn't. By aligning them we can increase output and the quality of that output." Anthony concluded: "Operating in a disconnected fashion having two distinct systems will cost you time and money. So we feel there's a material advantage in a solution like this." Enjoy the full story at http://www.mycustomer.com/topic/marketing/has-oracle-written-script-crm-success/139958

    Read the article

  • CRM at Oracle Series: Do Not Call & Do Not Email

    - by tony.berk
    Who you gonna call? Or not call! Sorry, just kidding, this isn't a movie blog! Do Not Call is an important topic for all businesses as there are government regulations that can lead to significant fines, and of course, possible damage to your brand. Oracle leverages Siebel CRM to develop an effective solution to address the Do Not Call and Email Permissible Use requirements. The application uses the Contacts functionality to manage communication preferences, which when defined, centrally synchronizes all contact records that share the same phone number and email address. Additionally, the relevant information is masked so Oracle employees cannot accidentally reach out to the contact. Therefore, the solution ensures that we are compliant with regulations, enables us to respect individuals' communication preferences and provides an audit trail of changes to their preferences. Today's CRM at Oracle slidecast discusses the requirements, highlights benefits and provides screen shots of the solution. CRM at Oracle Series: Do Not Call & Do Not Email Click here to learn more about Siebel CRM and other Oracle CRM products. Are you enjoying the CRM at Oracle Series? We are working on more topics for this year, but if there is a particular CRM area or function which you'd like to hear how Oracle implemented it internally, leave us a comment and we'll try to get it on our list.

    Read the article

  • links for 2010-05-04

    - by Bob Rhubart
    IdMapper: A Java Application for ID Mapping across Multiple Cross-Referencing Providers H/T to Geertjan for posting a link to this paper on a Netbeans-based project. (tags: java netbeans) Mastering Your Multicore System - Oracle Solaris Video How Sun Studio compilers and tools can simplify these challenges and enable you to fully unlock the potential in multicore architecture. Don Kretsch presents at Tech Days, Brazil, 2009. (tags: oracle sun sunstudio multicore video) Allison Dixon: COLLABORATE: OAUG Staff #c10 ORACLENERD guest blogger Allison Dixon offers a peek behind the curtain and a tip of the hat to the people behind Collaborate 10. (tags: oracle oaug ioug collaborate2010) @myfear: Java EE 5 or 6 - which to choose today Author, software architect, and Oracle ACE Director Markus Eisele shares his insight into the choice between Java EE versions. (tags: oracle otn java oracleace glassfish) @blueadept61: Architecture and Agility #entarch In yet another great, succinct post, Oracle ACE Director Mike Van Alst offers more quotable wisdom than I can share here. Read the whole thing. (tags: oracle otn entarch enterprisearchitecture agile) @blueadept61: Governance Causes SOA Projects to Fail? Oracle ACE Director Mike Van Alst's short but thought-provoking post raises issues of language and perception in dealing with the cultural hurdles to SOA Governance. (tags: oracle otn soa soagovernance communication) Anthony Shorten: List of available whitepapers as of 04 May 2010 Anthony Shorten shares a list of whitepapers available from My Oracle Support covering Oracle Utilities Application Framework based products. (tags: oracle otn whitepapers frameworks documentation) @processautomate: SOA Governance is Not a Documentation Exercise Leonardo Consulting SOA specialist Mervin Chiang proposes that simply considering and applying basic SOA governance -- service management -- can go a long way. (tags: otn oracle soa soagovernance) Article: Cloud Computing Capability Reference Model This Cloud Computing Capability Reference Model provides a functional view of the layers in a typical cloud stack to help Enterprise Architects identify the components necessary to implement Cloud solutions. (tags: oracle otn cloud entarch soa virtualization)

    Read the article

  • Meta-licensing of applications

    - by Gene
    I'm currently evaluating license management solutions for our customized and project-based applications, which are supported by a single server in the intranet of the customer. The applications use common functionality provided by the server (session handling, data synchronization, management capabilities, etc) and are installed on mobile devices. We allow our customers to run the applications on X devices and want to check on the server, whether the customer sticks to this limit (based on the sessions). We don't want licensing software to be installed on the devices itself (for example providing X serials to the customer) nor do we want to host an additional server for licensing in the intranet of the customer. If a client connects, our server should load the license for the application running on the client and verify, that there are sessions left. The licensing managers I looked at (12 products so far) focus on the application itself and don't allow me to implement such a floating behavior as described above. For example, this software could easily be used to create a "Standard Edition" or a "Professional Edition" of our server software, which is not our intention. In XHEO DeployLX there is a "Session Limit", which allows to limit the license to the currently established sessions in ASP.NET, which comes very close to my needs. I'm currently thinking of implementing a custom solution, which allows me to load and enforce custom-defined licenses per application on the server-side and a simple editor to define such licenses (which would contain a type and the limit itself), but I would appreciate an existing, easy to integrate commercial solution. I think it could be possible to use DeployLX for this task, but I would spend a lot of money for implementing most of the solution myself (except for the editor). Thanks in advance for any suggestions or hints. Gene

    Read the article

  • Oracle Utilities Application Framework V4.1 Group Fix 4 available

    - by ACShorten
    Oracle Utilities Application Framework V4.1 Group Fix 4 is available from My Oracle Support as Patch 13523301. This Group Fix contains a number of enhancements and keeps fixes up to date to the latest patch level. The enhancements included in this Group Fix include: UI Hints - In previous group fixes of the Oracle Utilities Application Framework the infrastructure to support UI Hints was introduced. This group fix completes the release of this functionality. Prior to this enhancement, products and implementers typically would build at least one UI Map per Business Object to display and/or maintain the object. Whilst, this can be generated using the UI Map maintenance function and stored, this enhancement allows additional tags and elements to be added to the Business Object directly to allow dynamic generation of the UI Map for maintenance and viewing the object. This reduces the need to generate and build a UI Map at all for that object. This will reduce maintenance effort of maintaining the product and implementation by eliminating the need to maintain the HTML for the UI Map. This also allows lower skilled personnel to maintain the system. Help and working examples are available from the View schema attributes and node names option from the Schema Tips dashboard zone. For example: Note: For examples of the hints, refer to an of the following Business Objects F1_OutcomeStyleLookup, F1-TodoSumEmailType, F1-BOStatusReason or F1-BIGeneralMasterConfig. Setting batch log file names -  By default the batch infrastructure supplied with the Oracle Utilities Application Framework sets the name and location of the log files to set values. In Group Fix 4 a set of user exits have been added to allow implementers and partners to set their own filename and location.  Refer to the Release Notes in the download for more details.

    Read the article

  • TechEd 2012: Office, SharePoint And More Office

    - by Tim Murphy
    I haven’t spent any time looking at Office 365 up to this point.  I met Donovan Follette on the flight down from Chicago.  I also got to spend some time discussing the product offerings with him at the TechExpo and that sealed my decision to attend this session. The main actor of his presentation is the BCS – Business Connectivity Services. He explained that while this feature has existed in on-site SharePoint it is a valuable new addition to Office 365 SharePoint Online.  If you aren’t familiar with the BCS, it allows you to leverage non-SharePoint enterprise data source from SharePoint.  The greatest benefactor is the end users who can leverage the data using a variety of Office products and more.  The one thing I haven’t shaken my skepticism of is the use of SharePoint Designer which Donovan used to create a WCF service.  It is mostly my tendency to try to create solutions that can be managed through the whole application life cycle.  It the past migrating through test environments has been near impossible with anything other than content created by SharePiont Designer. There is a lot of end user power here.  The biggest consideration I think you need to examine when reaching from you enterprise LOB data stores out to an online service and back is that you are going to take a performance hit.  This means that you have to be very aware of how you configure these integrated self serve solutions.  As a rule make sure you are using the right tool for the right situation. I appreciated that he showed both no code and code solutions for the consumer of the LOB data.  I came out of this session much better informed about the possibilities around this product. del.icio.us Tags: Office 365,SharePoint Online,TechEd,TechEd 2012

    Read the article

  • New Oracle Tutor Class: Create Procedures and Support Documents

    - by [email protected]
    Offered by Oracle University Course Code D66797GC10 July 14-16, 2010 in Chicago, IL This three day Instructor Led class is only US$ 2,250 Oracle® Tutor provides organizations with a powerful pair of applications to develop, deploy, and maintain employee business process documentation. Tutor includes a repository of prewritten process, procedure, and support documents that can be readily modified to reflect your company's unique business processes. The result is a set of job-role specific desk manuals that are easy to update and deploy online. Use Tutor to create content to: Implement new business applications Document for any regulatory compliance initiative Turn every desk into a self service reference center Increase employee productivity The primary challenge for companies faced with documenting policies, processes, and procedures is to realize that they can do this documentation in-house, with existing resources, using Oracle Tutor. Process documentation is a critical success component when implementing or upgrading to a new business application and for supporting corporate governance or other regulatory compliance initiatives. There are over 1000 Oracle Tutor customers worldwide that have used Tutor to create, distribute, and maintain their business procedures. This is easily accomplished because of Tutor's: Ease of use by those who have to write procedures (Microsoft Word based authoring) Ease of company-wide implementation (complex document management activities are centralized) Ease of use by workers who have to follow the procedures (play script format) Ease of access by remote workers (web-enabled) This course is an introduction to the Oracle Tutor suite of products. It focuses on the process documentation feature set of the Tutor applications. Participants will learn about writing procedures and maintaining these particular process document types, all using the Tutor method. Audience Business Analysts End Users Functional Implementer Project Manager Sales Consultants Security Compliance Auditors User Adoption Consultants Prerequisites No Prerequisite Courses strong working knowledge of MS Windows strong working knowledge of MS Word (2007) Objectives • Provide your organization with the next steps to implement the Tutor procedure writing method and system in your organization • Use the Tutor Author application to write employee focused process documents (procedures, instructions, references, process maps) • Use the Tutor Publisher application to create impact analysis reports, Employee Desk Manuals, and Owner Manuals Web site on OU Link to a PDF of the class summary Oracle University Training Centre - Chicago Emily Chorba Product Manager for Oracle Tutor

    Read the article

  • xVelocity engines compared: VertiPaq vs ColumnStore #ssas #vertipaq #xvelocity #sql #tabular

    - by Marco Russo (SQLBI)
    During the last months I and Alberto worked in several projects using Analysis Services Tabular and we had to face real world issues, such as complex queries, large data volume, frequent data updates and so on. Sometime we faced the challenge of comparing Tabular performance with SQL Server. It seemed a non-sense, because even if the same core xVelocity technology is implemented in both products (SQL Server 2012 uses ColumnStore indexes, whereas Analysis Services 2012 uses VertiPaq), we initially assumed that the better optimization for the in-memory engine used by Analysis Services would have been always better than SQL Server. However, we discovered several important things: Processing time might be different and having data on SQL Server could make ColumnStore way faster for processing. Partitioning in SQL Server might be much more effective for query performance than Analysis Services. A single query can scale easily on more processor on SQL Server, whereas in Analysis Services the formula engine is single-threaded and could be a bottleneck for certain queries. In case of a large workload with many concurrent users, storage engine cache in Analysis Services could be a big advantage over SQL Server, especially for scalability As you can see, these considerations are not always obvious and you might be tempted to make other assumptions based on these information. Well, don’t do that. Before anything else, read the whitepaper VertiPaq vs ColumnStore Comparison written by Alberto Ferrari. Then, measure your workload. Finally, make some conclusion. But don’t make too many assumptions. You might be wrong, as we did at the beginning of this journey.

    Read the article

  • Resolve Instructional Webcast Series — E-Business Suite Payables Period Close

    - by user793044
    Resolve Instructional Webcast Series — New Product Specific Troubleshooting Topics For E-Business we have coming up: Title: Resolve—Best Practices for E-Business Suite Payables Period Close Date: Nov 7, 2012 Time: 8:00 am MT - 3:00 pm GMT - 10:00 am Eastern - 8:30 pm India - 7:00 am Pacific This one-hour webcast shows you how to use 3 main recommendations: Period Close Helper – New Diagnostic to identify and resolve period close issues. Master Generic Datafix Diagnostic (MGD) usage in proactive/reactive mode. Recommended Patch Collection (RPC) uptake. This session will help customers to plan and complete their month on month period close activities successfully. Also, in approaching period close in a proactive way. It will assist in order to avoid last minute hassles and prevent delays in achieving the Period Close deadlines. Customers who are involved in the Payables period close activities (both Functional and Technical) will benefit most from the webcast. Join us. Leverage this opportunity to learn Support Best Practices that help you resolve the issues you face with your Oracle products. Oracle Support experts provide live demonstrations of proactive resources. You will see you how working proactively helps you work more efficiently—from using the right tools to providing the right information on Service requests—you can get answers faster. Register for sessions now Resolve—Troubleshooting Questions? Contact Oracle’s "Get Proactive" team today. WORK SMART. SOLVE FAST. RESOLVE.

    Read the article

  • A Model for Planning Your Oracle BPM 10g Migration by Kris Nelson

    - by JuergenKress
    As the Oracle SOA Suite and BPM Suite 12c products enter beta, many of our clients are starting to discuss migrating from the Oracle 10g or prior platforms. With the BPM Suite 11g, Oracle introduced a major change in architecture with a strong focus on integration with SOA and an entirely new technology stack. In addition, there were fresh new UIs and a renewed business focus with an improved Process Composer and features like Adaptive Case Management. While very beneficial to both technology and the business, the fundamental change in architecture does pose clear migration challenges for clients who have made investments in the 10g platform. Some of the key challenges facing 10g customers include: Managing in-process instance migration and running multiple process engines Migration of User Interfaces and other code within the environment that may not be automated Growing or finding technical staff with both 10g and 12c experience Managing migration projects while continuing to move the business forward and meet day-to-day responsibilities As a former practitioner in a mixed 10g/11g shop, I wrestled with many of these challenges as we tried to plan ahead for the migration. Luckily, there is migration tooling on the way from Oracle and several approaches you can use in planning your migration efforts. In addition, you already have a defined and visible process on the current platform, which will be invaluable as you migrate.  A Migration ModelThis model presents several options across a value and investment spectrum. The goal of the AVIO Migration Model is to kick-start discussions within your company and assist in creating a plan of action to take advantage of the new platform. As with all models, this is a framework for discussion and certain processes or situations may not fit. Please contact us if you have specific questions or want to discuss migrations efforts in your situation. Read the complete article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: Kris Nelson,ACM,Adaptive Case Management,Community,Oracle SOA,Oracle BPM,OPN,Jürgen Kress

    Read the article

  • Dryad and DryadLINQ from MSR

    - by Daniel Moth
    Microsoft Research (MSR) researches technologies, incubates projects which many times result in technology that looks like a ready-to-use product (but it is important to understand that these are not the same as products built by the various… actual product teams here at Microsoft). A very popular MSR project has been DryadLINQ, which itself builds on Dryad. To learn more follow the project pages I just linked to and I also recommend this 1-hour channel 9 video. If you only have 3 minutes, watch this great elevator pitch instead. You can also stay tuned on the official blog, which includes a post that refers to internal adoption e.g by Bing, a quick DryadLINQ code example, and some history on how DryadLINQ generalizes the MapReduce pattern and makes it accessible to regular programmers (see this post and that post). Essentially, the DryadLINQ framework (building on the Dryad runtime) allows developers to re-use their LINQ skills for creating/generating programs that process large multi-gigabyte/terabyte datasets across 100s-1000s of machines. One way to think about it is that just as Parallel LINQ allows LINQ developers to seamlessly use multiple cores from a single process on a single machine, DryadLINQ allows LINQ developers to seamlessly use multiple machines for their data parallel algorithms. In the former scenario the motivation was speed of execution, in the latter it is speed of execution AND processing large datasets that simply don't fit on a single machine. Whenever I hear about execution of parallel code on multiple machines on the Microsoft platform, I immediately think of Windows HPC Server. Indeed Dryad and DryadLINQ were made available for Windows HPC Server and I encourage you to watch the PDC session on this topic: Data-Intensive Computing on Windows HPC Server with the DryadLINQ Framework. Watch this space… Comments about this post welcome at the original blog.

    Read the article

  • Microsoft&rsquo;s new technical computing initiative

    - by Randy Walker
    I made a mental note from earlier in the year.  Microsoft literally buys computers by the truckload.  From what I understand, it’s a typical practice amongst large software vendors.  You plug a few wires in, you test it, and you instantly have mega tera tera flops (don’t hold me to that number).  Microsoft has been trying to plug away at their cloud services (named Azure).  Which, for the layman, means Microsoft runs your software on their computers, and as demand increases you can allocate more computing power on the fly. With this in mind, it doesn’t surprise me that I was recently sent an executive email concerning Microsoft’s new technical computing initiative.  I find it to be a great marketing idea with actual substance behind their real work.  From the programmer academic perspective, in college we dreamed about this type of processing power.  This has decades of computer science theory behind it. A copy of the email received.  (note that I almost deleted this email, thinking it was spam due to it’s length) We don't often think about how complex life really is. Take the relatively simple task of commuting to and from work: it is, in fact, a complicated interplay of variables such as weather, train delays, accidents, traffic patterns, road construction, etc. You can however, take steps to shorten your commute - using a good, predictive understanding of a few of these variables. In fact, you probably are already taking these inputs and instinctively building a predictive model that you act on daily to get to your destination more quickly. Now, when we apply the same method to very complex tasks, this modeling approach becomes much more challenging. Recent world events clearly demonstrated our inability to process vast amounts of information and variables that would have helped to more accurately predict the behavior of global financial markets or the occurrence and impact of a volcano eruption in Iceland. To make sense of issues like these, researchers, engineers and analysts create computer models of the almost infinite number of possible interactions in complex systems. But, they need increasingly more sophisticated computer models to better understand how the world behaves and to make fact-based predictions about the future. And, to do this, it requires a tremendous amount of computing power to process and examine the massive data deluge from cameras, digital sensors and precision instruments of all kinds. This is the key to creating more accurate and realistic models that expose the hidden meaning of data, which gives us the kind of insight we need to solve a myriad of challenges. We have made great strides in our ability to build these kinds of computer models, and yet they are still too difficult, expensive and time consuming to manage. Today, even the most complicated data-rich simulations cannot fully capture all of the intricacies and dependencies of the systems they are trying to model. That is why, across the scientific and engineering world, it is so hard to say with any certainty when or where the next volcano will erupt and what flight patterns it might affect, or to more accurately predict something like a global flu pandemic. So far, we just cannot collect, correlate and compute enough data to create an accurate forecast of the real world. But this is about to change. Innovations in technology are transforming our ability to measure, monitor and model how the world behaves. The implication for scientific research is profound, and it will transform the way we tackle global challenges like health care and climate change. It will also have a huge impact on engineering and business, delivering breakthroughs that could lead to the creation of new products, new businesses and even new industries. Because you are a subscriber to executive e-mails from Microsoft, I want you to be the first to know about a new effort focused specifically on empowering millions of the world's smartest problem solvers. Today, I am happy to introduce Microsoft's Technical Computing initiative. Our goal is to unleash the power of pervasive, accurate, real-time modeling to help people and organizations achieve their objectives and realize their potential. We are bringing together some of the brightest minds in the technical computing community across industry, academia and science at www.modelingtheworld.com to discuss trends, challenges and shared opportunities. New advances provide the foundation for tools and applications that will make technical computing more affordable and accessible where mathematical and computational principles are applied to solve practical problems. One day soon, complicated tasks like building a sophisticated computer model that would typically take a team of advanced software programmers months to build and days to run, will be accomplished in a single afternoon by a scientist, engineer or analyst working at the PC on their desktop. And as technology continues to advance, these models will become more complete and accurate in the way they represent the world. This will speed our ability to test new ideas, improve processes and advance our understanding of systems. Our technical computing initiative reflects the best of Microsoft's heritage. Ever since Bill Gates articulated the then far-fetched vision of "a computer on every desktop" in the early 1980's, Microsoft has been at the forefront of expanding the power and reach of computing to benefit the world. As someone who worked closely with Bill for many years at Microsoft, I am happy to share with you that the passion behind that vision is fully alive at Microsoft and is carried out in the creation of our new Technical Computing group. Enabling more people to make better predictions We have seen the impact of making greater computing power more available firsthand through our investments in high performance computing (HPC) over the past five years. Scientists, engineers and analysts in organizations of all sizes and sectors are finding that using distributed computational power creates societal impact, fuels scientific breakthroughs and delivers competitive advantages. For example, we have seen remarkable results from some of our current customers: Malaria strikes 300,000 to 500,000 people around the world each year. To help in the effort to eradicate malaria worldwide, scientists at Intellectual Ventures use software that simulates how the disease spreads and would respond to prevention and control methods, such as vaccines and the use of bed nets. Technical computing allows researchers to model more detailed parameters for more accurate results and receive those results in less than an hour, rather than waiting a full day. Aerospace engineering firm, a.i. solutions, Inc., needed a more powerful computing platform to keep up with the increasingly complex computational needs of its customers: NASA, the Department of Defense and other government agencies planning space flights. To meet that need, it adopted technical computing. Now, a.i. solutions can produce detailed predictions and analysis of the flight dynamics of a given spacecraft, from optimal launch times and orbit determination to attitude control and navigation, up to eight times faster. This enables them to avoid mistakes in any areas that can cause a space mission to fail and potentially result in the loss of life and millions of dollars. Western & Southern Financial Group faced the challenge of running ever larger and more complex actuarial models as its number of policyholders and products grew and regulatory requirements changed. The company chose an actuarial solution that runs on technical computing technology. The solution is easy for the company's IT staff to manage and adjust to meet business needs. The new solution helps the company reduce modeling time by up to 99 percent - letting the team fine-tune its models for more accurate product pricing and financial projections. Our Technical Computing direction Collaborating closely with partners across industry and academia, we must now extend the reach of technical computing even further to help predictive modelers and data explorers make faster, more accurate predictions. As we build the Technical Computing initiative, we will invest in three core areas: Technical computing to the cloud: Microsoft will play a leading role in bringing technical computing power to scientists, engineers and analysts through the cloud. Existing high- performance computing users will benefit from the ability to augment their on-premises systems with cloud resources that enable 'just-in-time' processing. This platform will help ensure processing resources are available whenever they are needed-reliably, consistently and quickly. Simplify parallel development: Today, computers are shipping with more processing power than ever, including multiple cores, but most modern software only uses a small amount of the available processing power. Parallel programs are extremely difficult to write, test and trouble shoot. However, a consistent model for parallel programming can help more developers unlock the tremendous power in today's modern computers and enable a new generation of technical computing. We are delivering new tools to automate and simplify writing software through parallel processing from the desktop... to the cluster... to the cloud. Develop powerful new technical computing tools and applications: We know scientists, engineers and analysts are pushing common tools (i.e., spreadsheets and databases) to the limits with complex, data-intensive models. They need easy access to more computing power and simplified tools to increase the speed of their work. We are building a platform to do this. Our development efforts will yield new, easy-to-use tools and applications that automate data acquisition, modeling, simulation, visualization, workflow and collaboration. This will allow them to spend more time on their work and less time wrestling with complicated technology. Thinking bigger There is so much left to be discovered and so many questions yet to be answered in the fascinating world around us. We believe the technical computing community will show us that we have not seen anything yet. Imagine just some of the breakthroughs this community could make possible: Better predictions to help improve the understanding of pandemics, contagion and global health trends. Climate change models that predict environmental, economic and human impact, accessible in real-time during key discussions and debates. More accurate prediction of natural disasters and their impact to develop more effective emergency response plans. With an ambitious charter in hand, this new team is ready to build on our progress to-date and execute Microsoft's technical computing vision over the months and years ahead. We will steadily invest in the right technologies, tools and talent, and work to bring together the technical computing community. I invite you to visit www.modelingtheworld.com today. We welcome your ideas and feedback. I look forward to making this journey with you and others who want to answer the world's biggest questions, discover solutions to problems that seem impossible and uncover a host of new opportunities to change the world we live in for the better. Bob

    Read the article

  • Demantra Post Production Support Common Issues, Troubleshooting Tips, and Maintaining Your Instance

    - by Annemarie Provisero
    ADVISOR WEBCAST: Demantra Post Production Support Common Issues, Troubleshooting Tips, and Maintaining Your Instance PRODUCT FAMILY: Manufacturing - Demantra Solutions   March 2, 2011 at 8 am PT, 9 am MT, 11 am ET You have now gone live, or are preparing to go live, on Demantra. What you need to keep the application running smoothly? This one-hour session is recommended for functional users who give direction to the Demantra application and the technical users who support the application. TOPICS WILL INCLUDE: Key troubleshooting logs Keeping the database well maintained both in backup and performance When data should be removed and/or archived out of the Demantra application A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Click here to register for this session ------------------------------------------------------------------------------------------------------------- The above webcast is a service of the E-Business Suite Communities in My Oracle Support. For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

    Read the article

  • Documentation in RETL, RIB, and RSL Release 13.2.4

    - by Oracle Retail Documentation Team
    The Patch Release 13.2.4 of the integration-related products, Oracle Retail Extract, Transform and Load (RETL), Oracle Retail Integration Bus (RIB), and Oracle Retail Service Layer (RSL), is now available from My Oracle Support. End User Documentation Enhancements The following enhancements have been made to the documentation: New RETL Installation GuideNew in Release 13.2.4, the RETL Installation Guide includes complete instructions to install and configure RETL 13.2.4. Installation instructions were previously in the Programmer’s Guide. As part of this enhancement, content was added to and tested in the RETL Installation Guide to ensure that it contain similar chapters and sections included in other Oracle Retail Installation Guides. Template Creator documentation, under the RIB product umbrellaThe Oracle Retail Functional Artifact Guide and the Oracle Retail Functional ArtifactGenerator Guide contain new information about a new tool called the Template Creator. The Functional Artifacts Generator tool has been enhanced to generate custom and localized payloads business objects on demand, based on Oracle Retail Functional Artifact rules. A new tool called the Template Creator has been provided to create the placeholder XSDs and the import hooks in the base objects on an as-needed basis. In other words, this tool constructs the appropriate placeholders in the packaging structure in the correct locations. The Artifact Generator tools, including the Template Creator, can be used either as a command line or GUI tool set.   List of Documents in RETL, RIB, and the Oracle Retail Service Layer (RSL) 13.2.4  The following documents are included in release 13.2.4 of the applications noted above: RIB Oracle Retail Integration Bus Release Notes Oracle Retail Integration Bus Implementation Guide Oracle Retail Integration Bus Installation Guide Oracle Retail Integration Bus Operations Guide Oracle Retail Functional Artifact Generator Guide Oracle Retail Functional Artifacts Guide Oracle Retail Service Layer Installation Guide Oracle Retail SOA Enabler Tool Guide RIB Integration Guide (ID 1277421.1) RETL Oracle Retail Extract, Transform, and Load Release Notes Oracle Retail Extract, Transform, and Load Installation Guide Oracle Retail Extract, Transform, and Load Programmer’s Guide RSL Oracle Retail Service Layer Release Notes Oracle Retail Service Layer Installation Guide Oracle Retail Service Layer Programmer’s Guide

    Read the article

  • Frank Ludolph's Last Day at Work

    - by mprove
    Hi Frank, today is your last day at Oracle. I cannot belief that retirement is an alternative to designing software and improving products for decades. I might figure it out myself in a couple of years. Our ways have crossed several times. And I am extremely thankful for that. I still remember my first session on an Apple Lisa. It must have been around 1985. I was still in school, and we were visiting the University of Hamburg to get some orientation on the departments. When I started I chose Informatics. And I suppose the Apple Lisa played a significant role in my decision. Is it fate that I later wrote about Apple Lisa? I’ve attended your presentation and public demo of the Lisa System at CHI ’98 in Los Angeles. Maybe a video still exists. I should look it up and publish it somewhere. You had also booth duty for Sun Microsystems – presenting HotJava Views, a user interface for a network computer. And you were handing out VHS tapes (!) of Starfire. I still have mine – but no player anymore. Then I joined Sun in 2002, and I guess I popped up in your office each time when I came to Santa Clara. The SEED mentoring program finally made it possible that we exchanged and discussed many ideas on the past and future of HCI. Dueling Interaction Models of Personal-Computing and Web-Computing at MEDICI 2007 is one of the results. But do you remember for instance also our jam session with Phil Clevenger on Hello World? Marvelous! I will miss you at Oracle. Enjoy your life and let’s stay in touch.Matthias

    Read the article

  • Get to Know a Candidate (18 of 25): Jack Fellure&ndash;Prohibition Party

    - by Brian Lanham
    DISCLAIMER: This is not a post about “Romney” or “Obama”. This is not a post for whom I am voting.  Information sourced for Wikipedia.  NOTE:  I apologize for getting this entry out of order. Fellure (born October 3, 1931) is an American perennial political candidate and retired engineer.  Fellure has formally campaigned for President of the United States in every presidential election since 1988 as a member of the Republican Party. He asserts on his campaign website that his platform based on the 1611 Authorized King James Bible has never changed. As a candidate, he calls for the elimination of the liquor industry, abortion and pornography, and advocates the teaching of the Bible in public schools and criminalization of homosexuality. He has blamed the ills of society on those he has characterized as "atheists, Marxists, liberals, queers, liars, draft dodgers, flag burners, dope addicts, sex perverts and anti-Christians." After another run in 2008, Fellure initially ran for the Republican Party's 2012 presidential nomination. He then decided to seek the nomination of the Prohibition Party at the party's national convention in Cullman, Alabama The Prohibition Party (PRO) is a political party in the United States best known for its historic opposition to the sale or consumption of alcoholic beverages. It is the oldest existing third party in the US. The party was an integral part of the temperance movement. While never one of the leading parties in the United States, it was once an important force in the politics of the United States during the late 19th century and the early years of the 20th century. It has declined dramatically since the repeal of Prohibition in 1933. The party earned only 643 votes in the 2008 presidential election. The Prohibition Party advocates a variety of socially conservative causes, including "stronger and more vigorous enforcement of laws against the sale of alcoholic beverages and tobacco products, against gambling, illegal drugs, pornography, and commercialized vice." Fellure has Ballot Access in: LA Learn more about Jack Fellure and Prohibition Party on Wikipedia.

    Read the article

  • Visual Studio, .NET Framework, and language versions

    - by Scott Dorman
    Every so often a question comes up about how Visual Studio, the .NET Framework, and a .NET programming language relate to each other. Mostly, these questions have to do with versions. The reality is that these are actually three different “products” that are versioned independently of each other but are related. Looking at how Visual Studio, the .NET Framework version, and the CLR versions relate to each other results in the following: Visual Studio CLR .NET Framework Visual Studio .NET (Ranier) 1.0.3705 1.0 Visual Studio 2003 (Everett) 1.1.4322 1.1 Visual Studio 2005 (Whidbey) 2.0.50727 2.0 Visual Studio 2005 with .NET 3.0 Extensions 2.0.50727 2.0, 3.0 Visual Studio 2008 (Orcas) 2.0.50727 2.0 SP1, 3.0 SP1, 3.5 Visual Studio 2008 SP1 2.0.50727 2.0 SP2, 3.0 SP2, 3.5 SP1 Visual Studio 2010 (Hawaii) 4.0.30319 4.0 The actual Visual Studio version numbers are: Product Name Version Ship Date Visual Studio .NET 7.0.???? 02/2002 Visual Studio .NET 2002 SP1 7.0.????   Visual Studio 2003 7.1.???? 04/2003 Visual Studio 2003 SP1 7.1.6030 09/13/2006 Visual Studio 2005 8.0.5072   Visual Studio 2005 SP1   12/14/2006 Visual Studio 2008 9.0.21022.8 11/19/2007 Visual Studio 2008 SP1 9.0.30729.1   Visual Studio 2010 10.0.30319.1 04/12/2010 (For those entries that are missing information, it simply means that I didn’t already know it and/or couldn’t easily find it online.) So far, everything seems fairly reasonable and isn’t terribly difficult to keep coordinated. However, when you start trying to find language versions and how those relate to .NET Framework, CLR, or Visual Studio releases it becomes more difficult. The breakdown for the programming languages that are part of Visual Studio are: Framework CLR Language     C# VB F# 1.0 1.0.3705 1.0 7.0 - 1.1 1.1.4322 1.1 7.1 - 2.0 2.0.50727 2.0 8.0 - 3.0 2.0.50727 2.0 8.0 - 3.5 2.0.50727 2.0 9.0 - 4.0 4.0.30319 4.0 10.0 2.0   Technorati Tags: Visual Studio,.NET

    Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >