Search Results

Search found 4131 results on 166 pages for 'strong typing'.

Page 124/166 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

  • Debugging Windows PC freeze

    - by Violet Giraffe
    I have a problem with my computer, would appreciate any hints/ideas. It usually begins not immediately after booting Windows, but at some unpredictable point in time, which doesn't seem to correlate with any specific actions of mine. First sign of a problem is process System starting to consume 25% CPU time steadily. I have a quad-core CPU, so it might be one thread working non-stop. At this point micro-freezes start to occur - screen stops refreshing, but if I have, say, music player running - it continues playing. If I try to do something between the freezes, like open Start menu, it will freeze completely and forever. If I press reset button the PC will shut down and then start cold, as opposed to usual reset behavior (which doesn't include PC shutting down). I have noticed that full restart upon reset is usual for hardware problems, but I think this problem isn't related to at least motherboard-CPU-RAM-videoadapter. It certainly isn't caused by overheating. One very important not is that it seems to be related to Windows hosted WLAN network: I have USB Wi-Fi dongle and have configured a hosted network to share cable Internet connection with Wi-Fi devices. I am not 100% certain there's a strong connection, but in 9 or 10 cases when I enabled the network (by executing netsh wlan start hostednetwork), it did freeze eventually (sometimes within minutes of starting the network, sometimes within hours), and on at least 10 days when I didn't start the network it never froze, no matter how I used the computer). There are no critical/error entries in the events log that I can suspect as being related, only regular stuff like "driver not loaded". I have found no critical/error events that are being logged around the time of freeze occurring and are not logged during normal boot without starting the WLAN.

    Read the article

  • VLAN setup on my PC

    - by Surjya Narayana Padhi
    Hi Geeks, I am bit new to VLAN. I want my two computers communicate through VLAN. I have following queries. As I am new to it my queries may be somewhat vague in some points. But i would like to hear from experts for my basic queries. I have two PCs Computer A and Computer B in two different IP networks Network A and Network B Both my PC has windows OS installed. How to send a VLAN(#Number) tagged packet from Computer A to Computer B and how to detect and untag the packet at Computer B? (Please provide the steps for windows OS) For this action do I need to check if my ethernet card supports VLAN tagging/untagging? If yes how can I know if my card supports it or not? Is the VLAN applied for Wireless ethernet controllers also? Do I need any switch or router for this action? Experts please given your inputs so that I can have a strong basic. If anyone can give some inputs how i can detect those VLAN in wireshirk, it will be helpful me also. Thanks in advance.

    Read the article

  • Directory tree in a Resource without extraction...

    - by Corelgott
    Hi all, i am looking for a way to store a complete directory including sub directories in an application's resource and not have to extract it to use it. Details: We would like to use GeckoFx (Gecko as C# Component) in one of our applications. GeckoFX needs the XUL-Runner and needs to find it's folder structure We have some other data which I would not prefer to extracted to the customer's pc; At least not onto something persistent like a hdd... Getting the complete directory into the resources is not that kind of a big deal. Compress to one file and done. But not writing it to the disk to use it is something else. I have a strong dislike against temp folders and such things. Would anything like a RAM drive be possible? Some part of the RAM beeing mounted? Does something like this even exist as a lib, or would this only be possible by a device driver? Any thoughts on this? Thanks in advance! Corelgott

    Read the article

  • Word 2003 will not show up in Windows 7

    - by invadersil
    I just installed Windows 7 over the holiday and it went swimmingly well. Today I finished up a few things like installed MS Office 2003. That went well too, until I tried to open up Word. When I try to open up Word on its own, it comes up in the application bar but the application window does not show. I use Word as the editor in Outlook which does work. I also discovered that I can start it up in safe mode and it will work normally. But normal startup just doesn't show me anything. Oddly, if I start typing stuff while the app is selected in the app bar and then try to close it, it pops up a message asking if I want to save it. I tried running the compatibility utility within Windows 7 but still no dice. Has anybody seen this issue yet? The other Office apps start normally. Edit: More info: Windows 7 Pro 64-bit. Office is patched up to SP3. And last time I checked, there were no updates either (and fully updated with KBs after SP3) And I did a fresh install of Windows 7.

    Read the article

  • vim coloring for git

    - by kelloti
    I'm on Windows and my vim loads with a terrible colorscheme with vim. The message is blue on black (so I can't see what I'm typing). I need to change the colorscheme, but :colorscheme slate doesn't do anything. :version vim - vi improved 7.3 (2010 aug 15, compiled oct 27 2010 17:51:38) ms-windows 32-bit console version included patches: 1-46 compiled by bram@kibaale big version without gui. features included (+) or not (-): +arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +gettext/dyn -hangul_input +iconv/dyn +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse -mouseshape +multi_byte +multi_lang -mzscheme -netbeans_intg -osfiletype +path_extra -perl +persistent_undo -postscript +printer -profile -python -python3 +quickfix +reltime +rightleft -ruby +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl -tgetent -termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -xfontset -xim -xterm_save -xpm_w32 system vimrc file: "$vim\vimrc" user vimrc file: "$home\_vimrc" 2nd user vimrc file: "$vim\_vimrc" user exrc file: "$home\_exrc" 2nd user exrc file: "$vim\_exrc" compilation: cl -c /w3 /nologo -i. -iproto -dhave_pathdef -dwin32 -dfeat_cscope -dwinver=0x0400 -d_win32_winnt=0x0400 /fo.\objc/ /ox /gl -dndebug /zl /mt -ddynamic_iconv -ddynamic_gettext -dfeat_big /fd.\objc/ /zi linking: link /release /nologo /subsystem:console /ltcg:status oldnames.lib kernel32.lib advapi32.lib shell32.lib gdi32.lib comdlg32.lib ole32.lib uuid.lib /machine:i386 /nodefaultlib libcmt.lib user32.lib /pdb:vim.pdb -debug My $HOME\_vimrc looks like colorscheme slate syn on set shiftwidth=2 set tabstop=2 and my $VIM\vimrc is the stock vimrc that comes with the Windows Vim distribution. How do I change my console Vim colorscheme? Especially for Git commits.

    Read the article

  • (help help!!!) Easy_install the wrong version of python modules (Mac OS)

    - by user71415
    I installed Python 2.7 in my mac. When typing "python" in terminal, it shows: Ma-Xiaolongs-MacBook-Pro-2:~ MaXiaolong$ python Python 2.7 (r27:82508, Jul 3 2010, 20:17:05) [GCC 4.0.1 (Apple Inc. build 5493)] on darwin Type "help", "copyright", "credits" or "license" for more information. The Python version is correct here. But when I try to easy_install some modules. The system will install the modules with python version 2.6 which are not able be imported to Python 2.7. And of course I can not do the functions I need in my code. Here's an example of easy_install graphy: Ma-Xiaolongs-MacBook-Pro-2:~ MaXiaolong$ easy_install graphy Searching for graphy Reading pypi.python.org/simple/graphy/ Reading http://code.google.com/p/graphy/ Best match: Graphy 1.0.0 Downloading http://pypi.python.org/packages/source/G/Graphy/Graphy- 1.0.0.tar.gz#md5=390b4f9194d81d0590abac90c8b717e0 Processing Graphy-1.0.0.tar.gz Running Graphy-1.0.0/setup.py -q bdist_egg --dist-dir /var/folders/fH/fHwdy4WtHZOBytkg1nOv9E+++TI/-Tmp-/easy_install-cFL53r/Graphy-1.0.0/egg-dist-tmp-YtDCZU warning: no files found matching '.tmpl' under directory 'graphy' warning: no files found matching '.txt' under directory 'graphy' warning: no files found matching '.h' under directory 'graphy' warning: no previously-included files matching '.pyc' found under directory '.' warning: no previously-included files matching '~' found under directory '.' warning: no previously-included files matching '.aux' found under directory '.' zip_safe flag not set; analyzing archive contents... graphy.all_tests: module references file Adding Graphy 1.0.0 to easy-install.pth file Installed /Library/Python/2.6/site-packages/Graphy-1.0.0-py2.6.egg Processing dependencies for graphy Finished processing dependencies for graphy So it installs graphy for python 2.6. Can someone help me with it? I just want to set my default easy_install version as 2.7... Thank you very much!!!!!!

    Read the article

  • how could application installations/configurations be easier in linux?

    - by ajsie
    although you can do anything in linux it tends to require a lot of tweaking in config files and reading a lot of manuals/tutorials before you can have it running in your way. i know that it gets a lot easier by time, and the apt-get installations with ubuntu/debian is heading the right way. but how can linux be more userfriendly for us in the future? i thought that if more is automated like an IDE environment, eg. typing svn will give us all the commands and description about each command when you move between commands with your keyboard. that would be great. but that's just one example. another is the navigation in the terminal between folders. now you have to type a lot just to jump from/to different folders. would be great with some more automatization here too. i know that these extra features will slow down the server, but its 2010 now, and these features are not that heavy for the cpu, but makes it more userfriendly and encourage maintainance of a server, not frighten u off. what do you think about this? should/could we have more user friendly linux environment in servers, something that has annoyed you a lot? a lot of things are done in the unix way, but maybe we should reinvent the wheel in some areas, cause apparently, its so...repeatingly today and difficult to do easy tasks. it should be easier i think..

    Read the article

  • Is this way of using Excel 2007 Pivot table for BI scalable ?

    - by Sim
    Hi all, Background: We need to consolidate sales data across the country to do analysis Our Internet connection/IT expertise/IT investment is not quite strong, therefore full BI solution is out of question I tried several SaaS BI solution (GoodData, ZohoReports) and while they're good, they seem not to fully support what we need We're looking at 'bout 2 millions record for every 2 months My current approach Our (10) sites currently gathers data from all their branches and consolidate them into 1 Excel file with Pivot table and embed source data In HQ, I will request 10 sites to send back those Excel files periodically We will import those Excel to our MSSQL server There will be a master Excel file, that will also have the same pivot table (as those came from site Excel file), and datasource is the MSSQL server More details For testing, I currently use MSSQL 2008 Express on my laptop So far, I imported our transactions for the past 2 months and there are 2 millions+ row in 1 table in MSSQL (we just use 1 table, corresponding to our common pivot table structure). DB size is ~ 600 MB In the master Excel file, if not including the source data, it's just < 10MB. Including the source data will increase the size to 60 MB (so I supposed Office 2007 automatically zip the data ?) I try using the Pivot (drag-and-drop fields) and the performance so far is OK (my laptop specs: C2D T7200, 3GB RAM, Windows XP) So my question is : If we're looking at full year transaction (roughly 15 millions rows in MSSQL 2008 Express, 3.6 GB in size), is there any issue with that 15 million rows in 1 table in SQL Express ? Is there any performance issue with the pivot table at that time ? Can it still embed the source data ? (I google-ed but didn't find the maximum size of source data Excel 2007 can embed) Any other suggestions on how we can better do this ? Given that we can't afford the full BI solution, any light-weight/budget/SaaS BI that you can recommend ? Thanks

    Read the article

  • DNS to \\Server\ wrong - \\Server.company.local\ works fine

    - by JimmyClif
    I had a little network glitch and since then one of my servers shows up wrong at some workstations when typing in \\server\. Example: On workstationA I go to Explorer and and type \\server\ and it brings me to our copier at 192.168.2.101. \\server.company.local\ gets me to the right place at 192.168.2.252. Ping with server pings 192.168.2.252 - same correct result with ping server.company.com nslookup also shows correct result with both. reverse lookup by ip is correct also. I flush the DNS on the workstation and the error still occurs. reboot same result. At that point I give up and start remapping the shares to \\server.company.local\share just to get the user back working... DNS Server has correct entries for that server. Can access the server via \\server\ on dns server, all looks fine. Eventually the workstation figures it out by itself and \\server\ works again but my life wouldn't be as stressful if I had a clue what happened or how to fix it myself. Thanks for your time looking and answering.

    Read the article

  • SSH session becomes unresponsive when logged into Ubuntu Server virtual machine using VirtualBox

    - by nickbart
    Hi everyone, I'm really at my wits end here, so I'm hoping someone here can help me. I have a virtual machine running Ubuntu Server 9.10. It's just a small development environment so I can keep my code separate from the test and production environments. I am running it through VirtualBox 3.1.6 on a laptop running Ubuntu Desktop 9.10. I have it set up with a bridged network connection and it is bridged to my laptop's wireless adapter. We have no wired connections in this office. I boot up the VM and everything is fine. I can SSH into it using gnome-terminal and for a while everything is Kosher. Then seemingly randomly, the SSH terminal session with hang. No error message, nothing; it just becomes unresponsive. If I go to the VirtualBox terminal I find the VM itself is perfectly fine. It can ping and I can SSH out with it. If I restart the networking on the VM the SSH session in my gnome-terminal will most of the time become responsive again. Here's an interesting point, the SSH session will sometimes die right in the middle of me typing something (this points to it not being an idle session issue) and if I go to the VirtualBox terminal and restart the networking and then return to my gnome-terminal SSH session I find that it will come back to life and what I typed when the session hung originally will magically type itself in to the buffer. So, my input is getting stored somewhere and just can't make its way to the VM until the networking on the VM is restarted. I've tried different versions of VirtualBox and used vmdk images and vdi images and nothing seems to work. I can't tell if the problem is with my laptop, VirtualBox, or the Ubuntu Server VDI. Is there anyway to debug this issue? Or has anyone out there seen anything similar? Your help is much appreciated. Nick

    Read the article

  • RTorrent stops my torrents, crashes, and I have to manually re-add torrents and start them. How can I stop this cycle of doom?

    - by meder
    I cannot use transmission which is the best torrent client because it's banned from one of the trackers I use, so I am forced to use rtorrent. Normally I am all for command-line programs, however rtorrent ( 0.8.6/0.12.6 ) is simply frustrating. It is not intuitive, imo. I have 400 MB left on the HD and that's more than enough to dl this 200 MB avi. Rtorrent stops the download, though. It says [CLOSED] near the torrent. I do ctrl-r and that invokes the local hash check, and after that's done rtorrent simply dies ( wtf? ). Afterwards, it gives me rtorrent: TrackerManager::send_later() m_control->set() == DownloadInfo::STOPPED. So that leads me to open rtorrent again, then hit ENTER and /home/meder/file.avi.torrent, down arrow, and ctrl-S. I am looking for multiple things... How can I tell rtorrent to not worry about disk space? Again, it stops the torrent if my HD only has 400 mb when the torrent I'm dling is 200 mb ( there are no other torrents ). Why does ctrl-R fail hard? Why does it cause rtorrent to crash? If #2 is not solvable, can someone provide an easy way to add a torrent and start it, a more efficient method than typing the torrent name, hitting the down arrow, and ctrl-S?

    Read the article

  • wget crawling search results of news website

    - by kiltek
    I am trying to crawl the search results of a news website using wget. The name of the website is www.voanews.com. After typing in my search keyword and clicking search, it proceeds to the results. Then i can specify a "to" and a "from"-date and hit search again. After this the URL becomes: http://www.voanews.com/search/?st=article&k=mykeyword&df=10%2F01%2F2013&dt=09%2F20%2F2013&ob=dt#article and the actual content of the results is what i want to download. To achieve this I created the following wget-command: wget --reject=js,txt,gif,jpeg,jpg \ --accept=html \ --user-agent=My-Browser \ --recursive --level=2 \ www.voanews.com/search/?st=article&k=germany&df=08%2F21%2F2013&dt=09%2F20%2F2013&ob=dt#article Unfortunately, the crawler doesn't download the search results. It only gets into the upper link bar, which contains the "Home,USA,Africa,Asia,..." links and saves the articles they link to. It seems like he crawler doesn't check the search result links at all. What am I doing wrong and how can I modify the wget command to download the results search list links (and of course the sites they link to) only ?

    Read the article

  • Define custom escape sequences in terminal

    - by Ipkiss
    I would like to change the escape sequences used by some keys in my terminal. My goal is to define custom mappings in Vim (terminal version). In the following I use shift-space as an example, but I would prefer if the proposed solution could be generic. My current terminal (gnome-terminal) uses a simple space as escape sequence for shift-space, as can be seen by typing ctrl-v shift-space. A quick check with the true xterm shows the same behavior. I would like that the shift-space key combo generates another escape sequence (e.g., the one of shift-F30, which I would never use otherwise). So, how would I go about doing that? And is it really a good idea? Let me know if there are better alternatives... Note: I'm aware that this is only part of the problem: after the terminal sends a proper escape sequence for my keys, I still need to teach Vim what it means. But I think I know how to deal with that.

    Read the article

  • VMware "boot screen" - add info like contact, phone number, etc.?

    - by TheCleaner
    I've tried searching Google and VMware's KB but maybe I'm not typing the right search criteria...only finding ways to fix problems with booting or screen issues. On the default boot screen of a host it looks similar to this picture from GIS: I'm curious if it is possible somehow to make it look like this instead (adding custom details): I know for the most part the info is "useless" since it is administered remotely, etc. But when I deploy standalone hosts to branch offices, it'd be nice for them to see this type of info on the boot screen. I may also include the VMs hosted on it (again on standalone hosts). Normal monitoring, etc. will be done remotely. This is strictly for odd times when the branch contact may say "the electricians are saying they need to turn off this circuit but I have no idea who to call in IT to tell them this box needs to be shut down" or similar. Anyone who has dealt with small branch offices can tell you that if it isn't labeled they easily forget what it is for and will simply say after the incident "I didn't know what it was or who to call." Possible?

    Read the article

  • How far should we take the N+N redundancy craziness ?

    - by Brann
    The industry standard when it comes from redundancy is quite high, to say the least. To illustrate my point, here is my current setup (I'm running a financial service). Each server has a RAID array in case something goes wrong on one hard drive .... and in case something goes wrong on the server, it's mirrored by another spare identical server ... and both server cannot go down at the same time, because I've got redundant power, and redundant network connectivity, etc ... and my hosting center itself has dual electricity connections to two different energy providers, and redundant network connectivity, and redundant toilets in case the two security guards (sorry, four) needs to use it at the same time ... and in case something goes wrong anyway (a nuclear nuke? can't think of anything else), I've got another identical hosting facility in another country with the exact same setup. Cost of reputational damage if down = very high Probability of a hardware failure with my setup : <<1% Probability of a hardware failure with a less paranoiac setup : <<1% ASWELL Probability of a software failure in our application code : 1% (if your software is never down because of bugs, then I suggest you doublecheck your reporting/monitoring system is not down. Even SQLServer - which is arguably developed and tested by clever people with a strong methodology - is sometimes down) In other words, I feel like I could host a cheap laptop in my mother's flat, and the human/software problems would still be my higher risk. Of course, there are other things to take into consideration such as : scalability data security the clients expectations that you meet the industry standard But still, hosting two servers in two different data centers (without extra spare servers, nor doubled network equipment apart from the one provided by my hosting facility) would provide me with the scalability and the physical security I need. I feel like we're reaching a point where redundancy is just a communcation tool. Honestly, what's the difference between a 99.999% uptime and a 99.9999% uptime when you know you'll be down 1% of the time because of software bugs ? How far do you push your redundancy crazyness ?

    Read the article

  • Why would I need a firewall if my server is well configured?

    - by Aitch
    I admin a handful of cloud-based (VPS) servers for the company I work for. The servers are minimal ubuntu installs that run bits of LAMP stacks / inbound data collection (rsync). The data is large but not personal, financial or anything like that (ie not that interesting) Clearly on here people are forever asking about configuring firewalls and such like. I use a bunch of approaches to secure the servers, for example (but not restricted to) ssh on non standard ports; no password typing, only known ssh keys from known ips for login etc https, and restricted shells (rssh) generally only from known keys/ips servers are minimal, up to date and patched regularly use things like rkhunter, cfengine, lynis denyhosts etc for monitoring I have extensive experience of unix sys admin. I'm confident I know what I'm doing in my setups. I configure /etc files. I have never felt a compelling need to install stuff like firewalls: iptables etc. Put aside for a moment the issues of physical security of the VPS. Q? I can't decide whether I am being naive or the incremental protection a fw might offer is worth the effort of learning / installing and the additional complexity (packages, config files, possible support etc) on the servers. To date (touch wood) I've never had any problems with security but I am not complacent about it either.

    Read the article

  • Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

    - by WerkkreW
    I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

    Read the article

  • Outlook 2010 not resolving SMTP address to Display Name

    - by Ben
    I have a weird problem where a user (director, naturally) has an odd problem with the way the to field shows in his Outlook. We are using Outlook 2010 (with RPC/HTTP) and Exch 2003 at the back end. Most of his mail shows in his mailbox with the To: field as normal. (e.g. Fred Bloggs in the to field.) However, some mails come in showing in the To: field as [email protected]. (Apparently this is an issue!) For example, most show as: but a few come in as: There doesn't appear to be a pattern to this. I have tried to replicate by: Sending from any specific senders to see if it recurs (it doesn't) Typing his full name in my Outlook and sending (it resolves as normal) Sending programatically (e.g. from script) - (it still resolves OK) Forcing a "[email protected]" entry in my Outlook. It resolves as soon as I hit enter Sending in cached mode Sending disconnected Anyone got any ideas how I can either replicate the problem or fix it! I can't tell at the moment whether it is a problem at his end or the sender's. EDIT This seems to be a global issue, following some more digging. Most people seem to have a few emails in their inbox addressed to their smtp address, rather than display name.

    Read the article

  • ProCurve ACL to prevent a subnet from leaving the switch

    - by kce
    I have a single HP ProCurve 2610 in a remote location that is connected in with the rest of the network via SHDSL. There are two Layer-3 networks on this segment. ACLs are setup to deny one subnet (192.0.2.0/24) from ever being able to leave the switch by virtue of being applied to port attached to the upstream connection. The other subnet should be permitted to freely leave the switch. Both subnets are on the same VLAN. Unfortunately SFlow very clearly show broadcast traffic from 192.0.2.0/24 on the upstream connection. ProCurve ACLs are not my strong suit but I feel like I'm missing something very simple here. ip access-list extended "Filter for Camera Network" deny ip 192.0.2.0 0.0.0.255 0.0.0.0 255.255.255.255 log permit ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 exit interface 24 name "DSL - UPLINK" access-group "Filter for Camera Network" in exit Unless I am mistaken traffic from 192.0.2.0/24 should be dropped as it crosses the uplink port (int 24) whereas all other traffic will be permited by the following default allow rule. What exactly am I missing here? EDIT: Firstly, why do you have two subnets contained in the same VLAN? Because that's how it was configured by a previous administrator and while it makes conceptual sense that a single subnet is "mapped" to a single VLAN there's no technical constraint that I am aware of that makes this have to be the case. Instead of filtering inbound traffic on your uplink, you should be filtering outbound traffic. The HP2600 series can only filter inbound traffic on interfaces. Should I change my filter to deny any to 192.0.2.0/24?

    Read the article

  • Connect by Wifi to Sql Server from another computer

    - by Bronzato
    I try to connect by Wifi to Sql Server with Sql Server Management Studio from another computer but it failed. I have a computer with Windows Seven & Sql Server 2008 (lets say the server computer). Next to it, I have a fresh installed computer with Windows Seven & Sql Server Management Studio (let's say the client computer). What I do on the server computer: configure firewall by enabling port 1433 enabled network protocols (TCP/IP) inside Sql Server Configuration Manager checked "Allow remote connections to this server" on server properties in Sql Server Management. started Sql Server Browser restarted services (Sql Server Browser is stopped but I think it is not neccessary, isn't it?) Next, I successfully tested a ping on the port 1433 from my client computer with a tool named tcping (ex: tcping 192.168.1.4 1433). But I still cannot connect from my client computer to Sql Server on my other computer. Ok, something new on this problem: until now, I successfully connected to my "server computer" with Management Studio. What I do is typing the computer name in the server name field in the connection window of Management Studio. My previous (failed) attempt was to type the computer name followed by the instance of sql server (ex: COMPUTER_NAME\SQL2008). I don't know why I only have to type the computer name... Nevermind. Now my new challenge is to succeed connecting my VB6 application to this remote database located on my "computer server". I have a connection string for this but it failed to connect. Here is my connection string: "Provider=SQLOLEDB.1;Password=mypassword;User ID=sa;Initial Catalog=TPB;Data Source=THIERRY-HP\SQL2008" Any idea what's wrong? Thanks

    Read the article

  • Solution to easily share large files with non-tech-savvy users?

    - by Tim
    Hey all, We've got a server setup at work which we'd like to use to exchange large files with known clients easily. We're looking into software to facilitate this, but somewhow typing "large file hosting" into Google gives questionable results.. ;) We've come up with the following requirements, and I hope any of you can points us in the direction of a solution that offers this functionality, or is malleable to our needs. Synchronization / revision management is of no concern, it's mostly single large (up to 1+ GB) file uploads & downloads we'll need. We'd like to make the downloads expire & be removed after a certain number of days / downloads, to limit the amount of cleanup we'd have to do. The data files exchanged sometimes hold confidential information, so the URLs generated should be random and not publicly visible. Our users are of the less technically savvy variety, so a simple webform would be best over a desktop client (because we also have to support a mix of operating systems). As for use of the system we'd either like to send out generated random URLs for them to upload their files, or have an easy way manage & expire users. Works on a linux (Ubuntu) server (so nothing .Net-related please) Does anyone know of software that fits the above criteria? We've already seen a few instances of this within the scientific community, but nothing we could use directly.. Best regards, Tim

    Read the article

  • Solution to easily share large files with non-tech-savvy users?

    - by Tim
    Hey all, We've got a server setup at work which we'd like to use to exchange large files with known clients easily. We're looking into software to facilitate this, but somewhow typing "large file hosting" into Google gives questionable results.. ;) We've come up with the following requirements, and I hope any of you can points us in the direction of a solution that offers this functionality, or is malleable to our needs. Synchronization / revision management is of no concern, it's mostly single large (up to 1+ GB) file uploads & downloads we'll need. We'd like to make the downloads expire & be removed after a certain number of days / downloads, to limit the amount of cleanup we'd have to do. The data files exchanged sometimes hold confidential information, so the URLs generated should be random and not publicly visible. Our users are of the less technically savvy variety, so a simple webform would be best over a desktop client (because we also have to support a mix of operating systems). As for use of the system we'd either like to send out generated random URLs for them to upload their files, or have an easy way manage & expire users. Works on a linux (Ubuntu) server (so nothing .Net-related please) Does anyone know of software that fits the above criteria? We've already seen a few instances of this within the scientific community, but nothing we could use directly.. Best regards, Tim

    Read the article

  • How to correctly set GNU Screen to display currently running program in hardstatus

    - by johnny_bgoode
    I posted this question on SuperUser but it's hardly getting any views, so I thought I'd ask here as well. In bash, to display the name of the current program in the GNU Screen hardstatus line takes only two configuration lines. First, tell screen what the end of your prompt normally looks like, and supply a default title for a window when you are sitting at in the shell: shelltitle "$ |bash" Next, place this escape sequence in the PS1 variable, before the characters that normally terminate the prompt '$ ' in this case: \033k\033\\\ This technique works, to a point. The hardstatus window title is updated to the name of the currently running program, and then switches back to the default title shortly after execution is finished. One major problem, however, is that this escape string is not escaped itself, causing line-wrapping problems with commands longer than the initial line. This was annoying, so I set out looking for a solution. Turns out, simply escaping the previous escape sequence corrects line wrapping: [\033k]\[\033\\\] Great! My hardstatus window title still updates to the name of the currently running program, and now my longer commands wrap to the second line correctly. However, with this new escape sequence in my PS1, screen updates the window title to the actual command I am typing, not simply the name of the current program once it is executed. I am wondering, has anyone gotten this working correctly - i.e. line wrapping and proper updating of the hardstatus window title? Thanks!

    Read the article

  • How to correctly set GNU Screen to display currently running program in hardstatus

    - by johnny_bgoode
    In bash, to display the name of the current program in the GNU Screen hardstatus line takes only two configuration lines. First, tell screen what the end of your prompt normally looks like, and supply a default title for a window when you are sitting at in the shell: shelltitle "$ |bash" Next, place this escape sequence in the PS1 variable, before the characters that normally terminate the prompt '$ ' in this case: \033k\033\\ This technique works, to a point. The hardstatus window title is updated to the name of the currently running program, and then switches back to the default title shortly after execution is finished. One major problem, however, is that this escape string is not escaped itself, causing line-wrapping problems with commands longer than the initial line. This was annoying, so I set out looking for a solution. Turns out, simply escaping the previous escape sequence corrects line wrapping: \[\033k\]\[\033\\\] Great! My hardstatus window title still updates to the name of the currently running program, and now my longer commands wrap to the second line correctly. However, with this new escape sequence in my PS1, screen updates the window title to the actual command I am typing, not simply the name of the current program once it is executed. I am wondering, has anyone gotten this working correctly - i.e. line wrapping and proper updating of the hardstatus window title?

    Read the article

  • IIS7 default document for urlMapped url throws 403 error

    - by MorningZ
    Hopefully this all makes sense: I have a Web Application project against an IIS7 server that is "theme-able" using different master pages. As a result of what I am trying to do, the root of the project has no aspx files, so I am using the web.config's ability to rewrite "~/default.aspx" to "~/themes/a/default.aspx" this works great as long as i type in "http://www.mysite.com/default.aspx", but typing just "http://www.mysite.com" results in a "403 - Forbidden: Access is denied" error I was hoping that the combination of urlMapping and default document would be smart enough to handle this, but it's not <system.webServer> <defaultDocument enabled="true"> <files> <clear /> <add value="default.aspx"/> </files> </defaultDocument> </system.webServer> i also tried <system.webServer> <defaultDocument enabled="true"> <files> <clear /> <add value="~/themes/a/default.aspx"/> </files> </defaultDocument> </system.webServer> to no avail I was hoping a browser would come in without a document defined, IIS7 would assume it was default.aspx, and then the urlMapping would map it accordingly, but nope any pointers? I've read a ton of posts here with similar issues, but not the exact issue

    Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >