Search Results

Search found 3508 results on 141 pages for 'face detection'.

Page 125/141 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

• No GLX on Intel card with multiseat with additional nVidia card

  - by MeanEYE

  I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

  Read the article

• MySQL for Excel 1.1.3 has been released

  - by Javier Treviño

  The MySQL Windows Experience Team is proud to announce the release of MySQL for Excel version 1.1.3, the  latest addition to the MySQL Installer for Windows. MySQL for Excel is an application plug-in enabling data analysts to very easily access and manipulate MySQL data within Microsoft Excel. It enables you to directly work with a MySQL database from within Microsoft Excel so you can easily do tasks such as: Importing MySQL Data into Excel Exporting Excel data directly into MySQL to a new or existing table Editing MySQL data directly within Excel MySQL for Excel is installed using the MySQL Installer for Windows. The MySQL installer comes in 2 versions   Full (150 MB) which includes a complete set of MySQL products with their binaries included in the download Web (1.5 MB - a network install) which will just pull MySQL for Excel over the web and install it when run.   You can download MySQL Installer from our official Downloads page at http://dev.mysql.com/downloads/installer/. MySQL for Excel 1.1.3 introduces the following features:   Upon saving a Workbook containing Worksheets in Edit Mode, the user is asked if he wants to exit the Edit Mode on all Worksheets before their parent Workbook is saved so the Worksheets are saved unprotected, otherwise the Worksheets will remain protected and the users will be able to unprotect them later retrieving the passkeys from the application log after closing MySQL for Excel. Added background coloring to the column names header row of an Import Data operation to have the same look as the one in an Edit Data operation (i.e. gray-ish background). Connection passwords can be stored securely just like MySQL Workbench does and these secured passwords are shared with Workbench in the same way connections are. Changed the way the MySQL for Excel ribbon toggle button works, instead of just showing or hiding the add-in it actually opens and closes it. Added a connection test before any operation against the database (schema creation, data import, append, export or edition) so the operation dialog is not shown and a friendlier error message is shown.   Also this release contains the following bug fixes:   Added a check on every connection test for an expired password, if the password has been expired a dialog is now shown to the user to reset the password. Bug #17354118 - DON'T HANDLE EXPIRED PASSWORDS Added code to escape text values to be imported to an Excel worksheet that start with an equals sign so Excel does not treat those values as formulas that will fail evaluation. This is an option turned on by default that can be turned off by users if they wish to import values to be treated as Excel formulas. Bug #17354102 - ERROR IMPORTING TEXT VALUES TO EXCEL STARTING WITH AN EQUALS SIGN Added code to properly check the reason for a failing connection, if it's a failing password the user gets a dialog to retry the connection with a different password until the connection succeeds, a connection error not related to the password is thrown or the user cancels. If the failing connection is not related to a bad password an error message is shown to the users indicating the reason of the failure. Bug #16239007 - CONNECTIONS TO MYSQL SERVICES NOT RUNNING DISPLAY A WRONG PASSWORD ERROR MESSAGE Added global options dialog that can be accessed from the Schema Selection and DB Object Selection panels where the timeouts for the connection to the DB Server and for the query commands can be changed from their default values (15 seconds for the connection timeout and 30 seconds for the query timeout). MySQL Bug #68732, Bug #17191646 - QUERY TIMEOUT CANNOT BE ADJUSTED IN MYSQL FOR EXCEL Changed the Varchar(65,535) data type shown in the Export Data data type combo box to Text since the maximum row size is 65,535 bytes and any autodetected column data type with a length greater than 4,000 should be set to Text actually for the table to be created successfully. MySQL Bug #69779, Bug #17191633 - EXPORT FAILS FOR EXCEL FILES CONTAINING > 4000 CHARACTERS OF TEXT PER CELL Removed code that was replacing all spaces typed by the user in an overriden data type for a new column in an Export Data operation, also improved the data type detection code to flag as invalid data types with parenthesis but without any text inside or where the contents inside the parenthesis are not valid for the specific data type. Bug #17260260 - EXPORT DATA SET TYPE NOT WORKING WITH MEMBER VALUES CONTAINING SPACES Added support for the year data type with a length of 2 or 4 and a validation that valid values are integers between 1901-2155 (for 4-digit years) or between 0-99 (for 2-digit years). Bug #17259915 - EXPORT DATA YEAR DATA TYPE NOT RECOGNIZED IF DECLARED WITH A DISPLAY WIDTH) Fixed code for Export Data operations where users overrode the data type for columns typing Text in the data type combobox, which is a valid data type but was not recognized as such. Bug #17259490 - EXPORT DATA TEXT DATA TYPE NOT RECOGNIZED AS A VALID DATA TYPE Changed the location of the registry where the MySQL for Excel add-in is installed to HKEY_LOCAL_MACHINE instead of HKEY_CURRENT_USER so the add-in is accessible by all users and not only to the user that installed it. For this to work with Excel 2007 a hotfix may be required (see http://support.microsoft.com/kb/976477). MySQL Bug #68746, Bug #16675992 - EXCEL-ADD-IN IS ONLY INSTALLED FOR USER ACCOUNT THAT THE INSTALLATION RUNS UNDER Added support for Excel 2013 Single Document Interface, now that Excel 2013 creates 1 window per workbook also the Excel Add-In maintains an independent custom task pane in each window. MySQL Bug #68792, Bug #17272087 - MYSQL FOR EXCEL SIDEBAR DOES NOT APPEAR IN EXCEL 2013 (WITH WORKAROUND) Included the latest MySQL Utility with a code fix for the COM exception thrown when attempting to open Workbench in the Manage Connections window. Bug #17258966 - MYSQL WORKBENCH NOT OPENED BY CLICKING MANAGE CONNECTIONS HOTLABEL Fixed code for Append Data operations that was not applying a calculated automatic mapping correctly when the source and target tables had different number of columns, some columns with the same name but some of those lying on column indexes beyond the limit of the other source/target table. MySQL Bug #69220, Bug #17278349 - APPEND DOESN'T AUTOMATICALLY DETECT EXCEL COL HEADER WITH SAME NAME AS SQL FIELD Fixed some code for Edit Data operations that was escaping special characters twice (during edition in Excel and then upon sending the query to the MySQL server). MySQL Bug #68669, Bug #17271693 - A BACKSLASH IS INSERTED BEFORE AN APOSTROPHE EDITING TABLE WITH MYSQL FOR EXCEL Upgraded MySQL Utility with latest version that encapsulates dialog base classes and introduces more classes to handle Workbench connections, and removed these from the Excel project. Bug #16500331 - CAN'T DELETE CONNECTIONS CREATED WITHIN ADDIN You can access the MySQL for Excel documentation at http://dev.mysql.com/doc/refman/5.6/en/mysql-for-excel.html You can find our team’s blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our MySQL for Excel forum found at http://forums.mysql.com/. Enjoy and thanks for the support!

  Read the article

• Waterfall Model (SDLC) vs. Prototyping Model

  The characters in the fable of the Tortoise and the Hare can easily be used to demonstrate the similarities and differences between the Waterfall and Prototyping software development models. This children fable is about a race between a consistently slow moving but steadfast turtle and an extremely fast but unreliable rabbit. After closely comparing each character’s attributes in correlation with both software development models, a trend seems to appear in that the Waterfall closely resembles the Tortoise in that Waterfall Model is typically a slow moving process that is broken up in to multiple sequential steps that must be executed in a standard linear pattern. The Tortoise can be quoted several times in the story saying “Slow and steady wins the race.” This is the perfect mantra for the Waterfall Model in that this model is seen as a cumbersome and slow moving. Waterfall Model Phases Requirement Analysis & Definition This phase focuses on defining requirements for a project that is to be developed and determining if the project is even feasible. Requirements are collected by analyzing existing systems and functionality in correlation with the needs of the business and the desires of the end users. The desired output for this phase is a list of specific requirements from the business that are to be designed and implemented in the subsequent steps. In addition this phase is used to determine if any value will be gained by completing the project. System Design This phase focuses primarily on the actual architectural design of a system, and how it will interact within itself and with other existing applications. Projects at this level should be viewed at a high level so that actual implementation details are decided in the implementation phase. However major environmental decision like hardware and platform decision are typically decided in this phase. Furthermore the basic goal of this phase is to design an application at the system level in those classes, interfaces, and interactions are defined. Additionally decisions about scalability, distribution and reliability should also be considered for all decisions. The desired output for this phase is a functional  design document that states all of the architectural decisions that have been made in regards to the project as well as a diagrams like a sequence and class diagrams. Software Design This phase focuses primarily on the refining of the decisions found in the functional design document. Classes and interfaces are further broken down in to logical modules based on the interfaces and interactions previously indicated. The output of this phase is a formal design document. Implementation / Coding This phase focuses primarily on implementing the previously defined modules in to units of code. These units are developed independently are intergraded as the system is put together as part of a whole system. Software Integration & Verification This phase primarily focuses on testing each of the units of code developed as well as testing the system as a whole. There are basic types of testing at this phase and they include: Unit Test and Integration Test. Unit Test are built to test the functionality of a code unit to ensure that it preforms its desired task. Integration testing test the system as a whole because it focuses on results of combining specific units of code and validating it against expected results. The output of this phase is a test plan that includes test with expected results and actual results. System Verification This phase primarily focuses on testing the system as a whole in regards to the list of project requirements and desired operating environment. Operation & Maintenance his phase primarily focuses on handing off the competed project over to the customer so that they can verify that all of their requirements have been met based on their original requirements. This phase will also validate the correctness of their requirements and if any changed need to be made. In addition, any problems not resolved in the previous phase will be handled in this section. The Waterfall Model’s linear and sequential methodology does offer a project certain advantages and disadvantages. Advantages of the Waterfall Model Simplistic to implement and execute for projects and/or company wide Limited demand on resources Large emphasis on documentation Disadvantages of the Waterfall Model Completed phases cannot be revisited regardless if issues arise within a project Accurate requirement are never gather prior to the completion of the requirement phase due to the lack of clarification in regards to client’s desires. Small changes or errors that arise in applications may cause additional problems The client cannot change any requirements once the requirements phase has been completed leaving them no options for changes as they see their requirements changes as the customers desires change. Excess documentation Phases are cumbersome and slow moving Learn more about the Major Process in the Sofware Development Life Cycle and Waterfall Model. Conversely, the Hare shares similar traits with the prototyping software development model in that ideas are rapidly converted to basic working examples and subsequent changes are made to quickly align the project with customers desires as they are formulated and as software strays from the customers vision. The basic concept of prototyping is to eliminate the use of well-defined project requirements. Projects are allowed to grow as the customer needs and request grow. Projects are initially designed according to basic requirements and are refined as requirement become more refined. This process allows customer to feel their way around the application to ensure that they are developing exactly what they want in the application This model also works well for determining the feasibility of certain approaches in regards to an application. Prototypes allow for quickly developing examples of implementing specific functionality based on certain techniques. Advantages of Prototyping Active participation from users and customers Allows customers to change their mind in specifying requirements Customers get a better understanding of the system as it is developed Earlier bug/error detection Promotes communication with customers Prototype could be used as final production Reduced time needed to develop applications compared to the Waterfall method Disadvantages of Prototyping Promotes constantly redefining project requirements that cause major system rewrites Potential for increased complexity of a system as scope of the system expands Customer could believe the prototype as the working version. Implementation compromises could increase the complexity when applying updates and or application fixes When companies trying to decide between the Waterfall model and Prototype model they need to evaluate the benefits and disadvantages for both models. Typically smaller companies or projects that have major time constraints typically head for more of a Prototype model approach because it can reduce the time needed to complete the project because there is more of a focus on building a project and less on defining requirements and scope prior to the start of a project. On the other hand, Companies with well-defined requirements and time allowed to generate proper documentation should steer towards more of a waterfall model because they are in a position to obtain clarified requirements and have to design and optimal solution prior to the start of coding on a project.

  Read the article

• MDM for Tax Authorities

  - by david.butler(at)oracle.com

  In last week’s MDM blog, we discussed MDM in the Public Sector. I want to continue that thread. After all, no industry faces tougher data quality problems than governmental organizations, and few industries suffer more significant down side consequences to poor operations than local, state and federal governments. One key challenge area is taxation. Tax Authorities face a multitude of IT challenges. Firstly, the data used in tax calculations is increasing in volume and complexity. They must improve service by introducing multi-channel contact centers and self-service capabilities. Security concerns necessitate increasingly sophisticated data protection procedures. And cost constraints are driving Tax Authorities to rely on off-the-shelf software for many of their functional areas. Compounding these issues is the fact that the IT architectures in operation at most revenue and collections agencies are very complex. They typically include multiple, disparate operational and analytical systems across which the sum total of data about individual constituents is fragmented. To make matters more complicated, taxation is not carried out by a single jurisdiction, and often sources of income including employers, investments and other sources of taxable income and deductions must also be tracked and shared among tax authorities. Collectively, these systems are involved in tax assessment and collections, risk analysis, scoring, tracking, auditing and investigation case management. The Problem of Constituent Data Management The infrastructure described above makes it very difficult to create a consolidated representation of a given party. Differing formats and data models mean that a constituent may be represented in one way in one system and in a different way in another. Individual records are frequently inaccurate, incomplete, out of date and/or inconsistent with other records relating to the same constituent. When constituent data must be aggregated and scored, information within each system must be rationalized and normalized so the agency can produce a constituent information file (CIF) that provides a single source of truth about that party. If information about that constituent changes, each system in turn must be updated. There have been many attempts to solve this problem with technology: from consolidating transactional systems to conducting manual systems integration projects and superimposing layers of business intelligence and analytics. All these approaches can be successful in solving a portion of the problem at a specific point in time, but without an enterprise perspective, anything gained is quickly lost again. Oracle Constituent Data Mastering for Tax Authorities: A Single View of the Constituent Oracle has a flexible and long-term solution to the problem of securely integrating and managing constituent data. The Oracle Solution for mastering Constituent Data for Tax Authorities is based on two core product offerings: Oracle Customer Hub and – optionally – Oracle Application Integration Architecture (AIA). Customer Hub is a master data management (MDM) product that centralizes, de-duplicates, and enriches constituent data. It unifies fragmented information without disrupting existing business processes or IT investments. Role based data access and privacy rules guarantee maximum security and privacy. Data is continuously and automatically synchronized with all source systems. With the Oracle Customer Hub managing the master constituent identity, every department can capture transaction activity against the same record, improving reporting accuracy, employee productivity, reliability of constituent analytics, and day-to-day constituent relationships. Oracle Application Integration Architecture provides a collection of core pre-built processes to support out of the box Master Data Governance across Oracle Customer Hub, Siebel CRM, and Oracle E-Business Suite. It also provides a framework to enable MDM integrations with other Oracle and non-Oracle applications. Oracle AIA removes some of the key inhibitors to implementing a service-oriented architecture (SOA) by providing a pre-built SOA-based middleware foundation as well as industry-optimized service oriented applications, all built around a SOA governance model that encourages effective design and reuse. I encourage you to read Oracle Solution for Mastering Constituents Data for Public Sector – Tax Authorities by Roberto Negro. It is an outstanding whitepaper that describes how the Oracle MDM solution allows you to create a unified, reconciled source of high-quality constituent data and gain an accurate single view of each constituent. This foundation enables you to lower the costs associated with data quality and integration and create a tax organization that is efficient, secure and constituent-centric. Also, don’t forget the upcoming webcast on Thursday, February 10th: Deliver Improved Services to Citizens at Lower Cost to your Organization Our Guest Speaker is Ruben Spekle, from Capgemini. He will also provide insight into Public Sector Master Data Management and Case Management implementations including one that was executed for a Dutch Government Agency. If you are interested in how governmental organizations from around the world are using MDM to advance their cause, click here to register for the webcast.

  Read the article

• Top ten things that don't make sense in The Walking Dead

  - by iamjames

  For those of you that don't know, The Walking Dead is a popular American TV show on AMC about a group of people trying to survive in a zombie-filled world.Here's the top ten eleven things that don't make sense on the show (and have never been explained) 1)  They never visit stores.  No Walmarts, Kmarts, Targets, shopping malls, pawn shops, gas stations, etc.  You'd think that would be the first place you'd visit for supplies, but they never have.  Not once.  There was a tiny corner store they visited in a small town, and while many products were already gone they did find several useful items.  2)  They never raid houses.  Why not?  One would imagine that they would want to search houses for useful items, but they don't.3)  They don't use 2 way radios.  Modern 2-way radios have a 36-mile range.  That's probably best possible range, but even if the range is only 10% of that, 3.6 miles, that's still more than enough for most situations, for the occasional "hey zombies attacking can you give me a hand?" or "there's zombies walking by stay inside until they leave" or "remember to pick up milk at the store love mom".  And yes they would need batteries or recharging, but they have been using gas-powered generators on the show and I'm sure a car charger would work.4)  They use gas-guzzling vehicles.  Every vehicle they have is from the 80s or 90s except for the new Kia SUV there for product placement.  Why?  They should all be driving new small SUVs or hybrids.  Visit a dealership and steal more fuel-efficient vehicles, because while the Walmart's might be empty from people raiding them for supplies, I'm sure most people weren't thinking "Gee, I should go car shopping" when the infection hit5)  They drive a motorcycle.  Seriously?  Let's find the least protective vehicle and drive that.  And while motorcycles get reasonable gas mileage, 5 people in a SUV gets better gas mileage per person than 5 people all driving motorcycles so it doesn't make economical sense either.6)  They drive loud vehicles.  The motorcycle used is commonly referred to as a chopper and is about as loud as a motorcycle can get.  The zombies are attracted to loud noise, so wouldn't it make more sense to drive vehicles that makes less sound?  Because as soon as you stop the bike and get off you're surrounded by zombies that heard you coming.  And it's not just the bike, the ~1980s Chevy SUV in the show is also very loud.7)  They never run out of food.  Seems like that would be a almost daily struggle, keeping enough food available for about a dozen people, yet I've never seen them visit a grocery store or local convenience store to stock up.8)  They don't carry swords, machetes, clubs, etc.  Let's face it, biting is not a very effective means of attack.  It's good for animals because they have fangs and little else, but humans have been finding better ways of killing each other since forever.  So why doesn't everyone on the show carry a sword or machete or at least a baseball bat?  Anything is better than wasting valuable bullets all the time.  Sure, dozen zombies approaching?  Shoot them.  One zombie approaching?  Save the bullet, cut off it's head.  9)  They do not wear protective clothing.  Human teeth are not exactly the sharpest teeth in the animal kingdom.  The leather shoes your dog ripped to shreds within minutes would probably take you days to bite through.  So why do they walk around half-naked?  Yes I know it's hot in Atlanta, but you'd think they'd at least have some tough leather coats or something for protection.  Maybe put a few small vent holes in the fabric if it's really hot.  Or better:  make your own chainmail.  Chainmail was used for thousands of years for protection from swords and is still used by scuba divers for protection from sharks.  If swords and sharks can't puncture it, human teeth don't stand a chance.  10)  They don't build barricades or dig trenches around properties.  In Season 2 they stayed at a farm in the middle of no where.  While being far away from people is a great way to stay far away from zombies, it would still make sense to build some sort of defenses.  Hordes of zombies would knock down almost any fence, but what about a trench or moat?  Maybe something not too wide so it can be jumped over easily but a zombie would fall into because I haven't seen too many jumping zombies on the show.  11)  They don't live in a mall or tall office building.  A mall would be perfect.  They have large security gates designed to keep even hundreds of people from breaking in and offer lots of supplies and food.  They're usually hundreds of thousands of square feet and fully enclosed, one could probably live their entire life happily in a mall.  Tall office building with on-site cafeteria would be another good choice.  They also usually offer good security and office furniture could be pushed out of the windows to crush approaching zombies, and the cafeteria is usually stocked to provide food for hundreds or thousands of office workers so food wouldn't be a problem for a long time. So there you have it, eleven things that don't make sense in The Walking Dead.  Have any of your own you'd like to add or were one of these things covered in the show?  Let me know in the comments.

  Read the article

• What Counts For A DBA: Foresight

  - by drsql

  Of all the valuable attributes of a DBA covered so far in this series, ranging from passion to humility to practicality, perhaps one of the most important attributes may turn out to be the most seemingly-nebulous: foresight. According to Free Dictionary foresight is the "perception of the significance and nature of events before they have occurred". Foresight does not come naturally to most people, as the parent of any teenager will attest. No matter how clearly you see their problems coming they won't listen, and have to fail before eventually (hopefully) learning for themselves. Having graduated from the school of hard knocks, the DBA, the naive teenager no longer, acquires the ability to foretell how events will unfold in response to certain actions or attitudes with the unerring accuracy of a doom-laden prophet. Like Simba in the Lion King, after a few blows to the head, we foretell that a sore head that will be the inevitable consequence of a swing of Rafiki's stick, and we take evasive action. However, foresight is about more than simply learning when to duck. It's about taking the time to understand and prevent the habits that caused the stick to swing in the first place. And based on this definition, I often think there is a lot less foresight on display in my industry than there ought to be. Most DBAs reading this blog will spot a line such as the following in a piece of "working" code, understand immediately why it is less than optimimum, and take evasive action. …WHERE CAST (columnName as int) = 1 However, the programmers who regularly write this sort of code clearly lack that foresight, and this and numerous other examples of similarly-malodorous code prevail throughout our industry (and provide premium-grade fertilizer for the healthy growth of many a consultant's bank account). Sometimes, perhaps harried by impatient managers and painfully tight deadlines, everyone makes mistakes. Yes, I too occasionally write code that "works", but basically stinks. When the problems manifest, it is sometimes accompanied by a sense of grim recognition that somewhere in me existed the foresight to know that that approach would lead to this problem. However, in the headlong rush, warning signs got overlooked, lessons learned previously, which could supply the foresight to the current project, were lost and not applied.   Of course, the problem often is a simple lack of skills, training and knowledge in the relevant technology and/or business space; programmers and DBAs forced to do their best in the face of inadequate training, or to apply their skills in areas where they lack experience. However, often the problem goes deeper than this; I detect in some DBAs and programmers a certain laziness of attitude.   They veer from one project to the next, going with "whatever works", unwilling or unable to take the time to understand where their actions are leading them. Of course, the whole "Agile" mindset is often interpreted to favor flexibility and rapid production over aiming to get things right the first time. The faster you try to travel in the dark, frequently changing direction, the more important it is to have someone who has the foresight to know at least roughly where you are heading. This is doubly true for the data tier which, no matter how you try to deny it, simply cannot be "redone" every month as you learn aspects of the world you are trying to model that, with a little bit of foresight, you would have seen coming.   Sometimes, when as a DBA you can glance briefly at 200 lines of working SQL code and know instinctively why it will cause problems, foresight can feel like magic, but it isn't; it's more like muscle memory. It is acquired as the consequence of good experience, useful communication with those around you, and a willingness to learn continually, through continued education as well as from failure. Foresight can be deployed only by finding time to understand how the lessons learned from other DBAs, and other projects, can help steer the current project in the right direction.   C.S. Lewis once said "The future is something which everyone reaches at the rate of sixty minutes an hour, whatever he does, whoever he is." It cannot be avoided; the quality of what you build now is going to affect you, and others, at some point in the future. Take the time to acquire foresight; it is a love letter to your future self, to say you cared.

  Read the article

• CodePlex Daily Summary for Friday, August 22, 2014

  CodePlex Daily Summary for Friday, August 22, 2014Popular ReleasesQuickMon: Version 3.22: This release add two important changes. 1. Config variables at the monitor pack level (global to entire monitor pack for all Collectors) 2. The QuickMon (Windows) service now automatically reloads monitor packs that have been changed since it was started. This means you don't have to restart the service for changes to take effect.SSIS ReportGeneratorTask: ReportGenerator Task 1.8: New version of the SSIS Report Generator Task that supports SQL Server 2008, 2012 and 2014. In addition to minor bug fixes Multi-Value Parameters and Execution Information were integrated. The complete variable and parameter assignment is now a string and can be set dynamically.Corefig for Windows Server 2012 Core and Hyper-V Server 2012: Corefig 1.1.2 ISO: FixesUpdated Hyper-V scripts to use version 2 of the WMI tree. Updated the Hyper-V check for saved VM to look for the proper identifier. Fixed text issues with the licensing tab (thanks to briangw for rooting this problem out). EnhancementsNew (and improved) version number in Corefig.psd1.Outlook 2013 Backup Add-In: Outlook Backup Add-In 1.3: Changelog for new version: Added button in config-window to reset the last backup-time (this will trigger the backup after closing outlook) Minimum interval set to 0 (backup at each closing of outlook) Catch exception when data store entry is corrupt Added two parameters (prefix and suffix) to automatically rename the backup file Updated VSTO-Runtime to 10.0.50325 Upgraded project to Visual Studio 2013 Added optional command to run after backup (e.g. pack backup files, ...) Add...babelua: 1.6.7.0: V1.6.7.0 - 2014.8.21New feature: add a file search window ( ctrl+1 or ALT+L ), like The file search in VC Assistant; Stability improvement: performance improvement when BabeLua load/unload; performance improvement when debugger load lua files;File Explorer for WPF: FileExplorer3_20August2014: Please see Aug14 Update.Open NFe: RDI Open NFe 3.0 (alpha): Atualização para o layout 3.10 da NFe.ODBC Connect: v1.0: ODBC Connect executables for both 32bit and 64bit ODBC data sourcesMSSQL Deployment Tool: Microsoft SQL Deploy Tool v1.3.1: MicrosoftSqlDeployTool: v1.3.1.38348 What's changed? Update namespace and assembly name. Bug fixing.SharePoint 2013 Search Query Tool: SharePoint 2013 Search Query Tool v2.1: Layout improvements Bug fixes Stores auth method and user name Moved experimental settings to Advanced boxCtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.2.41183 Alpha: This alpha of the CtrlAltStudio Viewer provides some preliminary Oculus Rift DK2 support. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-2-41183-alpha Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of Second Life.HDD Guardian: HDD Guardian 0.6.1: New: package now include smartctl 6.3; Removed: standard notification e-mail. Now you have to set your mail server to send e-mail alerts; Bugfix: USB detection error; custom e-mail server settings issue; bottom panel displays a wrong ATA error count.VG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksMagick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...Fluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.New Projects1thManage: GDT for erevery oneCreateProjectOnCodePlex: This is the first project for CoderCamps.HEAD FIRST C# LAB 1 : A DAY AT THE RACES: This has been provided for educational purposes and general discussion to improve coding practices associated with the resources detailed within Head First C#.Introduce Audit logging to your EF application using Repository & Unit of Work: Introduce Auditing in your application that uses Entity Framework by utilizing the Repository and Unit of Work design patterns.License Registration (C++): Allow to create demo version, activate or not a module.MS Word SharepointWiki Plugin: Scope of the Plugin is to enable a Post to a Sharepoint Wiki from within MS Word with Formatted Text and Images.Send My Zip: This app will help you to send the files were zipped then send the email about password information. This project is currently in setup mode and only availablewinhttp: this is a project for http/https download.Wix Builder: WixBuilder focusses on easily generating a WiX script from a project ouput, compile and link it into msi installer using the WiX Toolset.XiamiSig: ????????。

  Read the article

• High Jinks, Hi Jacks, Exceptional DBA Awards and PASS

  - by Rodney

  The countdown to PASS has counted down.  The day after tomorrow I will board a plane, like many others, on my way for the 4th year in a row to SQL PASS Summit.  The anticipation has been excruciating but luckily I have this little thing called a day job as a DBA that has kept me busy and not thinking too much about the event. Well that is not exactly true since my beautiful wife works for PASS so we get to talk about SQL from the time we wake up until late in the evening. I would not have it any other way and I feel very fortunate to be a part of this great event and to have been chosen as the Exceptional DBA Award judge also for the 4th year in a row.  This year, I will have been again tasked with presenting the award to the winner, Mr. Jeff Moden and it will be a true honor to meet him in person as I have read many of his articles on SSC and have attended his session at PASS previously.  The speech is all ready but one item remains, which will be a surprise to all who attend the party on Tuesday night in Seattle (see links below).  Let's face it, Exceptional DBAs everywhere work very hard protecting our data stores, tuning queries, mentoring, saving money, installing clusters, etc and once in a while there is time to be exceptionally non-professional and have a bit of fun. Once incident that happened this year that falls under the High Jinks category was when my network admin asked if I could Telnet into a SQL instance and see if I could make the connection through the firewall that he had just configured. I was able to establish a connection on port 1433 and it occurred to me that it would be very interesting if I could actually run T-SQL queries via a Telnet session much like you might do with an SMTP server. With that thought, I proceeded to demonstrate this could be possible by convincing my senior DBA Shawn McGehee that I was able to do so. At first he did not believe me. It shook his world view.  It was inconceivable.  What I had done, behind the scenes, of course, was to copy and rename SQLCMD.exe to Telnet.exe and used it to connect and run a simple, "Select * from sys.databases" on the SQL instance. I think if it had been anyone other than Shawn I could have extended this ruse indefinitely but he caught on within 30 seconds. It was a fun thirty seconds though. On the High Jacks side of the house, which is really merged to be SQL HACKS, I finally, after several years of struggling with how to connect to an untrusted domain like in a DMZ with a windows account in SSMS, I stumbled upon a solution that does away with the requirement to use SQL Authentication.  While "Runas" is a great command to use to run an application with a higher privileged account, I had not previously been able to figure out how to connect to the remote domain with SSMS and "Runsas". It never connected and caused a login failure every time for the remote windows domain account. Then I ran across an option for "Runas",   "/netonly".  This option postpones the login until a connection is made and only then passes the remote login you supply when you first launch SSMS with the "Runas" command. So a typical shortcut would look like: "C:\Windows\System32\runas.exe /netonly /user:remotedomain.com\rodlandrum "C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe" You will want to make sure the passwords are synced between the two domains, your local domain and the remote domain, otherwise you may have account lockout issues, but I have found in weeks of testing this is a stable solution. Now it is time to get ready to head for Seattle. Please, if you see me (@SQLBeat) or my wife (@Karlakay22) please run up and high five me (wait..High Jinks.High Jacks.High Fives.Need to change the title) or give me a big bear hug if you are strong enough to lift me off the ground. And if you do actually do that, I will think you are awesome and will not embarrass you by crying out for help or complaining of a broken back or sciatic nerve damage. And now the links to others who have all of the details. First, for the MVP Deep Dives 2, of which, like John, I was lucky enough to be able to participate in this year. http://www.simple-talk.com/community/blogs/johnm/archive/2011/09/29/103577.aspx And the details of the SSC party where the Exceptional DBA of 2011, Jeff Moden, will be awarded. http://www.simple-talk.com/community/blogs/rebecca_amos/archive/2011/10/05/103661.aspx   Cheers! Rodney

  Read the article

• Interview with Geoff Bones, developer on SQL Storage Compress

  - by red(at)work

  How did you come to be working at Red Gate? I've been working at Red Gate for nine months; before that I had been at a multinational engineering company. A number of my colleagues had left to work at Red Gate and spoke very highly of it, but I was happy in my role and thought, 'It can't be that great there, surely? They'll be back!' Then one day I visited to catch up them over lunch in the Red Gate canteen. I was so impressed with what I found there, that, three days later, I'd applied for a role as a developer. And how did you get into software development? My first job out of university was working as a systems programmer on IBM mainframes. This was quite a while ago: there was a lot of assembler and loading programs from tape drives and that kind of stuff. I learned a lot about how computers work, and this stood me in good stead when I moved over the development in the 90s. What's the best thing about working as a developer at Red Gate? Where should I start? One of the great things as a developer at Red Gate is the useful feedback and close contact we have with the people who use our products, either directly at trade shows and other events or through information coming through the product managers. The company's whole ethos is built around assisting the user, and this is in big contrast to my previous development roles. We aim to produce tools that people really want to use, that they enjoy using, and, as a developer, this is a great thing to aim for and a great feeling when we get it right. At Red Gate we also try to cut out the things that distract and stop us doing our jobs. As a developer, this means that I can focus on the code and the product I'm working on, knowing that others are doing a first-class job of making sure that the builds are running smoothly and that I'm getting great feedback from the testers. We keep our process light and effective, as we want to produce great software more than we want to produce great audit trails. Tell us a bit about the products you are currently working on. You mean HyperBac? First let me explain a bit about what HyperBac is. At heart it's a compression and encryption technology, but with a few added features that open up a wealth of really exciting possibilities. Right now we have the HyperBac technology in just three products: SQL HyperBac, SQL Virtual Restore and SQL Storage Compress, but we're only starting to develop what it can do. My personal favourite is SQL Virtual Restore; for example, I love the way you can use it to run independent test databases that are all backed by a single compressed backup. I don't think the market yet realises the kind of things you do once you are using these products. On the other hand, the benefits of SQL Storage Compress are straightforward: run your databases but use only 20% of the disk space. Databases are getting larger and larger, and, as they do, so does your ROI. What's a typical day for you? My days are pretty varied. We have our daily team stand-up meeting and then sometimes I will work alone on a current issue, or I'll be pair programming with one of my colleagues. From time to time we give half a day up to future planning with the team, when we look at the long and short term aims for the product and working out the development priorities. I also get to go to conferences and events, which is unusual for a development role and gives me the chance to meet and talk to our customers directly. Have you noticed anything different about developing tools for DBAs rather than other IT kinds of user? It seems to me that DBAs are quite independent minded; they know exactly what the problem they are facing is, and often have a solution in mind before they begin to look for what's on the market. This means that they're likely to cherry-pick tools from a range of vendors, picking the ones that are the best fit for them and that disrupt their environments the least. When I've met with DBAs, I've often been very impressed at their ability to summarise their set up, the issues, the obstacles they face when implementing a tool and their plans for their environment. It's easier to develop products for this audience as they give such a detailed overview of their needs, and I feel I understand their problems.

  Read the article

• Answers to Your Common Oracle Database Lifecycle Management Questions

  - by Scott McNeil

  We recently ran a live webcast on Strategies for Managing Oracle Database's Lifecycle. There were tons of questions from our audience that we simply could not get to during the hour long presentation. Below are some of those questions along with their answers. Enjoy! Question: In the webcast the presenter talked about “gold” configuration standards, for those who want to use this technique, could you recommend a best practice to consider or follow? How do I get started? Answer:Gold configuration standardization is a quick and easy way to improve availability through consistency. Start by choosing a reference database and saving the configuration to the Oracle Enterprise Manager repository using the Save Configuration feature. Next create a comparison template using the Oracle provided template as a starting point and modify the ignored properties to eliminate expected differences in your environment. Finally create a comparison specification using the comparison template you created plus your saved gold configuration and schedule it to run on a regular basis. Don’t forget to fill in the email addresses of those you want to notify upon drift detection. Watch the database configuration management demo to learn more. Question: Can Oracle Lifecycle Management Pack for Database help with patching an Oracle Real Application Cluster (RAC) environment? Answer: Yes, Oracle Enterprise Manager supports both parallel and rolling patch application of Oracle Real Application Clusters. The use of rolling patching is recommended as there is no downtime involved. For more details watch this demo. Question: What are some of the things administrators can do to control configuration drift? Why is it important? Answer:Configuration drift is one of the main causes of instability and downtime of applications. Oracle Enterprise Manager makes it easy to manage and control drift using scheduled configuration comparisons combined with comparison templates. Question: Does Oracle Enterprise Manager 12c Release 2 offer an incremental update feature for "gold" images? For instance, if the source binary has a higher PSU level, what is the best approach to update the existing "gold" image in the software library? Do you have to create a new image or can you just update the original one? Answer:Provisioning Profiles (Gold images) can contain the installation files and database configuration templates. Although it is possible to make some changes to the profile after creation (mainly to configuration), it is normally recommended to simply create a new profile after applying a patch to your reference database. Question: The webcast talked about enforcing in-house standards, does Oracle Enterprise Manager 12c offer verification of your databases and systems to those standards? For example, the initial "gold" image has been massively deployed over time, and there may be some changes to it. How can you do regular checks from Enterprise Manager to ensure the in-house standards are being enforced? Answer:There are really two methods to validate conformity to standards. The first method is to use gold standards which you compare other databases to report unwanted differences. This method uses a new comparison template technology which allows users to ignore known differences (i.e. SID, Start time, etc) which results in a report only showing important or non-conformant differences. This method is quick to setup and configure and recommended for those who want to get started validating compliance quickly. The second method leverages the new compliance framework which allows the creation of specific and robust validations. These compliance rules are grouped into standards which can be assigned to databases quickly and easily. Compliance rules allow for targeted and more sophisticated validation beyond the basic equals operation available in the comparison method. The compliance framework can be used to implement just about any internal or industry standard. The compliance results will track current and historic compliance scores at the overall and individual database targets. When the issue is resolved, the score is automatically affected. Compliance framework is the recommended long term solution for validating compliance using Oracle Enterprise Manager 12c. Check out this demo on database compliance to learn more. Question: If you are using the integration between Oracle Enterprise Manager and My Oracle Support in an "offline" mode, how do you know if you have the latest My Oracle Support metadata? Answer:In Oracle Enterprise Manager 12c Release 2, you now only need to download one zip file containing all of the metadata xmls files. There is no indication that the metadata has changed but you could run a checksum on the file and compare it to the previously downloaded version to see if it has changed. Question: What happens if a patch fails while administrators are applying it to a database or system? Answer:A large portion of Oracle Enterprise Manager's patch automation is the pre-requisite checks that happen to ensure the highest level of confidence the patch will successfully apply. It is recommended you test the patch in a non-production environment and save the patch plan as a template once successful so you can create new plans using the saved template. If you are using the recommended ‘out of place’ patching methodology, there is no urgency because the database is still running as the cloned Oracle home is being patched. Users can address the issue and restart the patch procedure at the point it left off. If you are using 'in place' method, you can address the issue and continue where the procedure left off. Question: Can Oracle Enterprise Manager 12c R2 compare configurations between more than one target at the same time? Answer:Oracle Enterprise Manager 12c can compare any number of target configurations at one time. This is the basis of many important use cases including Configuration Drift Management. These comparisons can also be scheduled on a regular basis and emails notification sent should any differences appear. To learn more about configuration search and compare watch this demo. Question: How is data comparison done since changes are taking place in a live production system? Answer:There are many things to keep in mind when using the data comparison feature (as part of the Change Management ability to compare table data). It was primarily intended to be used for maintaining consistency of important but relatively static data. For example, application seed data and application setup configuration. This data does not change often but is critical when testing an application to ensure results are consistent with production. It is not recommended to use data comparison on highly dynamic data like transactional tables or very large tables. Question: Which versions of Oracle Database can be monitored through Oracle Enterprise Manager 12c? Answer:Oracle Database versions: 9.2.0.8, 10.1.0.5, 10.2.0.4, 10.2.0.5, 11.1.0.7, 11.2.0.1, 11.2.0.2, 11.2.0.3. Watch the On-Demand Webcast Stay Connected: Twitter | Facebook | YouTube | Linkedin | NewsletterDownload the Oracle Enterprise Manager Cloud Control12c Mobile app

  Read the article

• Windows 7 / Ubuntu Dualboot GRUB Problem.

  - by Tek

  I'd like to first say ahead of time that I'm running a RAID-0 Setup. 1.First of all, I'm glad Ubuntu 9.10 installed flawlessly and detected my RAID-0 setup just fine. The issue I'm having now is that I already had Windows 7 installed and made a small 12GB partition for Linux/Swap. I grabbed EasyBCD 2.0 to edit the W7 bootloader and configured it to use dual boot Grub2 because before it didn't even show the option for Ubuntu. The bootloader points to a file made in the windows directory made by EasyBCD called "C:\NST\AutoNeoGrub0.mbr" which is what I'm guessing grub is booting from. After that I got the option for booting Ubuntu. The problem is that it's sending me to the Grub prompt (probably because it's pointing to \NST|AutoNeoGrub0.mbr?), at first I didn't know what to do but I researched and have to type grub commands to manually boot into Ubuntu Linux. Ex: grubroot (hd0,4) grubkernel /boot/vmlinuz-2.6... root=/dev/disk/by-uuid/24624-2424... grubinitrd boot/initrd.img-2.6... grubboot After all that Ubuntu boots just fine, but how do I fix it permanently? Do I need to edit the bootloader manually (since Easy BCD "autoconfigures")? Some insight on this would rock! Also, it sucks to type the actual uuid since it's REALLY long. I tried getting the name of the drive via fdisk -l but since it's raid 0 I'm guessing I can't do that. How can I get a shorter name of the drive? like /dev/sda, /dev/sdb etc? I've also tried to update to the latest GRUB and I got this: Creating config file /etc/default/grub with new version Generating core.img error: cannot seek /dev/sdc' error: cannot seek/dev/sdc' grub-probe: error: no mapping exists for nvidia_dbedfcca5' Auto-detection of a filesystem module failed. Please specify the module with the option--modules' explicitly. dpkg: error processing grub-pc (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of grub2: grub2 depends on grub-pc; however: Package grub-pc is not configured yet. dpkg: error processing grub2 (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. E: Sub-process /usr/bin/dpkg returned an error code (1) I've also tried: b@dnb:~$ sudo update-grub error: cannot seek /dev/sdc' error: cannot seek/dev/sdc' Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.31-14-generic Found initrd image: /boot/initrd.img-2.6.31-14-generic error: cannot seek /dev/sdc' grub-probe: error: no mapping exists fornvidia_dbedfcca5' error: cannot seek /dev/sdc' grub-probe: error: no mapping exists fornvidia_dbedfcca5' Found memtest86+ image: /boot/memtest86+.bin Found Windows 7 (loader) on /dev/mapper/nvidia_dbedfcca1 error: cannot seek /dev/sdc' grub-probe: error: no mapping exists fornvidia_dbedfcca1' done To no avail. Any idea what I can do to fix this mess? :( Edit: This is my disk configuration. b@dnb:~$ sudo df -l Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/nvidia_dbedfcca5 12302232 2744788 8932520 24% / udev 1030288 268 1030020 1% /dev none 1030288 964 1029324 1% /dev/shm none 1030288 92 1030196 1% /var/run none 1030288 0 1030288 0% /var/lock none 1030288 0 1030288 0% /lib/init/rw /dev/sr0 706532 706532 0 100% /media/cdrom0 Note: /dev/mapper/nvidia_dbedfcca5 is my Linux boot partition

  Read the article

• Breaking up the Workday– Overcoming the Workaholic Syndrome

  - by dwahlin

  Hi, my name’s Dan Wahlin and I’m a workaholic – I admit it. It’s good from the standpoint that I get a lot done but it also has a lot of cons associated with it as well that I’m not proud of. I literally can’t watch TV without feeling like I should be doing something more productive (although I have no problem going to see movies at a theater or watching sporting events – that’s my escape I guess). On vacation it’s sometimes difficult the first few days to just “let go” of work and enjoy the time with my family. I always feel like I should be checking email and following up with different business projects. Fortunately, my wife knows me really well after 17 years of marriage and “gently” restricts my usage of laptops and other gadgets while we’re out. She also reminds me that constantly burying my face in gadgets just isn’t cool and shows a distinct lack of self control. On a given day I typically put in between 12 (at a minimum) up to 16-18 hours working on projects. My company does .NET consulting (ASP.NET/jQuery, SharePoint and Silverlight) but we also do a lot in the training space so there’s always a client project, some new courseware or some other deliverable that has to be worked on. My normal process for handling that is to just work my butt off and see how much I can get done. That process has worked well for a long time but when you start realizing that your happiness comes from how much work you accomplished that day then you have a problem. That’s especially true if you have kids (which I do….two awesome boys). It’s almost as if working more hours feels like I’m more successful or something which is of course ridiculous. It may actually mean that I’m too distracted or disorganized. Lately I’ve realized that while I’m still productive and always meet my deadlines, I’m really burnt out by the afternoon and have lost some of the excitement I used to have. Part of that’s normal I think given that I’ve been doing this for close to 15 years now, but in thinking through it more I realized that I just need to get away from the desk and take a break. By far, the happiest time of my life was my childhood. Part of that was due to having awesome parents, having far less responsibility (a big factor I suspect), being able to hang-out with friends at school, playing sports, games, etc. but I think a big part of the overall happiness came from being outside a lot. I lived on my bike as a little kid and as I grew up I shared time between riding an ATV all over the place, shooting hoops on the basketball court, playing golf and working on a golf course (all outside work of course).  Being a software developer and trainer I generally spend 95% or more of my day indoors and only see the sun when driving from place to place or by looking out the window (that’s sad because I live in a suburb of Phoenix, AZ where it’s nearly always sunny). I haven’t looked into any scientific studies on the matter, but I’d be willing to bet there’s a direct correlation between overall productivity/happiness and being outside some throughout the day (sunny or not). But, I wasn’t sure what to do about it since I do have a lot of deadlines I need to meet after all. While talking with my wife last night I mentioned how I feel like I’m in a rut and want to get the “fun” back that I used to have. She immediately said that I need to start making time for breaks (a real quick fact – she’s a lot smarter than me and nearly always right). Of course my first thought was that I’d be less productive taking breaks. If I spend 2 hours just relaxing then I’m losing 2 hours of work. But, I thought about it more and realized that I’m probably less productive when I work 10+ hours and only take less than 30 minutes for a lunch break to relax a little. I bet my brain is screaming, “Please let me relax a little so I can figure out these problems you’re trying to resolve!”. So, starting today I’m going to try to break the workaholic habit and spend time outside of the office. That could mean sitting around outside, working out, golfing, or whatever. I’ve decided that no gadgets are allowed during that time and that I shouldn’t work for more than 4 hours straight without taking a break. I have no idea how my little “break the workaholic syndrome” experiment will go or how long it will last, but I’d be very interested in hearing from others on how they keep fresh and focused without working yourself to death. If you have any specific ideas, techniques or practices you follow please share them. There’s a lot more to life than work and some of us (and I’m thinking of myself specifically) need to take a long, hard look at what kind of balance we currently have. I’d hate to look back at my life when I’m 80 years old and say, “The only thing I did was work – I missed out on life!”.

  Read the article

• Extending Database-as-a-Service to Provision Databases with Application Data

  - by Nilesh A

  Oracle Enterprise Manager 12c Database as a Service (DBaaS) empowers Self Service/SSA Users to rapidly spawn databases on demand in cloud. The configuration and structure of provisioned databases depends on respective service template selected by Self Service user while requesting for database. In EM12c, the DBaaS Self Service/SSA Administrator has the option of hosting various service templates in service catalog and based on underlying DBCA templates.Many times provisioned databases require production scale data either for UAT, testing or development purpose and managing DBCA templates with data can be unwieldy. So, we need to populate the database using post deployment script option and without any additional work for the SSA Users. The SSA Administrator can automate this task in few easy steps. For details on how to setup DBaaS Self Service Portal refer to the DBaaS CookbookIn this article, I will list steps required to enable EM 12c DBaaS to provision databases with application data in two distinct ways using: 1) Data pump 2) Transportable tablespaces (TTS). The steps listed below are just examples of how to extend EM 12c DBaaS and you can even have your own method plugged in part of post deployment script option. Using Data Pump to populate databases These are the steps to be followed to implement extending DBaaS using Data Pump methodolgy: Production DBA should run data pump export on the production database and make the dump file available to all the servers participating in the database zone [sample shown in Fig.1] -- Full exportexpdp FULL=y DUMPFILE=data_pump_dir:dpfull1%U.dmp, data_pump_dir:dpfull2%U.dmp PARALLEL=4 LOGFILE=data_pump_dir:dpexpfull.log JOB_NAME=dpexpfull Figure-1:  Full export of database using data pump Create a post deployment SQL script [sample shown in Fig. 2] and this script can either be uploaded into the software library by SSA Administrator or made available on a shared location accessible from servers where databases are likely to be provisioned Normal 0 -- Full importdeclare    h1   NUMBER;begin-- Creating the directory object where source database dump is backed up.    execute immediate 'create directory DEST_LOC as''/scratch/nagrawal/OracleHomes/oradata/INITCHNG/datafile''';-- Running import    h1 := dbms_datapump.open (operation => 'IMPORT', job_mode => 'FULL', job_name => 'DB_IMPORT10');    dbms_datapump.set_parallel(handle => h1, degree => 1);    dbms_datapump.add_file(handle => h1, filename => 'IMP_GRIDDB_FULL.LOG', directory => 'DATA_PUMP_DIR', filetype => 3);    dbms_datapump.add_file(handle => h1, filename => 'EXP_GRIDDB_FULL_%U.DMP', directory => 'DEST_LOC', filetype => 1);    dbms_datapump.start_job(handle => h1);    dbms_datapump.detach(handle => h1);end;/ Figure-2: Importing using data pump pl/sql procedures Using DBCA, create a template for the production database – include all the init.ora parameters, tablespaces, datafiles & their sizes SSA Administrator should customize “Create Database Deployment Procedure” and provide DBCA template created in the previous step. In “Additional Configuration Options” step of Customize “Create Database Deployment Procedure” flow, provide the name of the SQL script in the Custom Script section and lock the input (shown in Fig. 3). Continue saving the deployment procedure. Figure-3: Using Custom script option for calling Import SQL Now, an SSA user can login to Self Service Portal and use the flow to provision a database that will also  populate the data using the post deployment step. Using Transportable tablespaces to populate databases Copy of all user/application tablespaces will enable this method of populating databases. These are the required steps to extend DBaaS using transportable tablespaces: Production DBA needs to create a backup of tablespaces. Datafiles may need conversion [such as from Big Endian to Little Endian or vice versa] based on the platform of production and destination where DBaaS created the test database. Here is sample backup script shows how to find out if any conversion is required, describes the steps required to convert datafiles and backup tablespace. SSA Administrator should copy the database (tablespaces) backup datafiles and export dumps to the backup location accessible from the hosts participating in the database zone(s). Create a post deployment SQL script and this script can either be uploaded into the software library by SSA Administrator or made available on a shared location accessible from servers where databases are likely to be provisioned. Here is sample post deployment SQL script using transportable tablespaces. Using DBCA, create a template for the production database – all the init.ora parameters should be included. NOTE: DO NOT choose to bring tablespace data into this template as they will be created SSA Administrator should customize “Create Database Deployment Procedure” and provide DBCA template created in the previous step. In the “Additional Configuration Options” step of the flow, provide the name of the SQL script in the Custom Script section and lock the input. Continue saving the deployment procedure. Now, an SSA user can login to Self Service Portal and use the flow to provision a database that will also populate the data using the post deployment step. More Information: Database-as-a-Service on Exadata Cloud Podcast on Database as a Service using Oracle Enterprise Manager 12c Oracle Enterprise Manager 12c Installation and Administration guide, Cloud Administration guide DBaaS Cookbook Screenwatch: Private Database Cloud: Set Up the Cloud Self-Service Portal Screenwatch: Private Database Cloud: Use the Cloud Self-Service Portal Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Database-as-a-Service on Exadata Cloud

  - by Gagan Chawla

  Note – Oracle Enterprise Manager 12c DBaaS is platform agnostic and is designed to work on Exadata/non-Exadata, physical/virtual, Oracle/non Oracle platforms and it’s not a mandatory requirement to use Exadata as the base platform. Database-as-a-Service (DBaaS) is an important trend these days and the top business drivers motivating customers towards private database cloud model include constant pressure to reduce IT Costs and Complexity, and also to be able to improve Agility and Quality of Service. The first step many enterprises take in their journey towards cloud computing is to move to a consolidated and standardized environment and Exadata being already a proven best-in-class popular consolidation platform, we are seeing now more and more customers starting to evolve from Exadata based platform into an agile self service driven private database cloud using Oracle Enterprise Manager 12c. Together Exadata Database Machine and Enterprise Manager 12c provides industry’s most comprehensive and integrated solution to transform from a typical silo’ed environment into enterprise class database cloud with self service, rapid elasticity and pay-per-use capabilities.   In today’s post, I’ll list down the important steps to enable DBaaS on Exadata using Enterprise Manager 12c. These steps are chalked down based on a recent DBaaS implementation from a real customer engagement - Project Planning - First step involves defining the scope of implementation, mapping functional requirements and objectives to use cases, defining high availability, network, security requirements, and delivering the project plan. In a Cloud project you plan around technology, business and processes all together so ensure you engage your actual end users and stakeholders early on in the project right from the scoping and planning stage. Setup your EM 12c Cloud Control Site – Once the project plan approval and sign off from stakeholders is achieved, refer to EM 12c Install guide and these are some important tips to follow during the site setup phase - Review the new EM 12c Sizing paper before you get started with install Cloud, Chargeback and Trending, Exadata plug ins should be selected to deploy during install Refer to EM 12c Administrator’s guide for High Availability, Security, Network/Firewall best practices and options Your management and managed infrastructure should not be combined i.e. EM 12c repository should not be hosted on same Exadata where target Database Cloud is to be setup Setup Roles and Users – Cloud Administrator (EM_CLOUD_ADMINISTRATOR), Self Service Administrator (EM_SSA_ADMINISTRATOR), Self Service User (EM_SSA_USER) are the important roles required for cloud lifecycle management. Roles and users are managed by Super Administrator via Setup menu –> Security option. For Self Service/SSA users custom role(s) based on EM_SSA_USER should be created and EM_USER, PUBLIC roles should be revoked during SSA user account creation. Configure Software Library – Cloud Administrator logs in and in this step configures software library via Enterprise menu –> provisioning and patching option and the storage location is OMS shared filesystem. Software Library is the centralized repository that stores all software entities and is often termed as ‘local store’. Setup Self Update – Self Update is one of the most innovative and cool new features in EM 12c framework. Self update can be accessed via Setup -> Extensibility option by Super Administrator and is the unified delivery mechanism to get all new and updated entities (Agent software, plug ins, connectors, gold images, provisioning bundles etc) in EM 12c. Deploy Agents on all Compute nodes, and discover Exadata targets – Refer to Exadata discovery cookbook for detailed walkthrough to ensure successful discovery of Exadata targets. Configure Privilege Delegation Settings – This step involves deployment of privilege setting template on all the nodes by Super Administrator via Setup menu -> Security option with the option to define whether to use sudo or powerbroker for all provisioning and patching operations. Provision Grid Infrastructure with RAC Database on Compute Nodes – Software is provisioned in this step via a provisioning profile using EM 12c database provisioning. In case of Exadata, Grid Infrastructure and RAC Database software is already deployed on compute nodes via OneCommand from Oracle, so SSA Administrator just needs to discover Oracle Homes and Listener as EM targets. Databases will be created as and when users request for databases from cloud. Customize Create Database Deployment Procedure – the actual database creation steps are "templatized" in this step by Self Service Administrator and the newly saved deployment procedure will be used during service template creation in next step. This is an important step and make sure you have locked all the required variables marked as locked as ‘Y’ in this table. Setup Self Service Portal – This step involves setting up of zones, user quotas, service templates, chargeback plan. The SSA portal is setup by Self Service Administrator via Setup menu -> Cloud -> Database option and following guided workflow. Refer to DBaaS cookbook for details. You also have an option to customize SSA login page via steps documented in EM 12c Cloud Administrator’s guide Final Checks – Define and document process guidelines for SSA users and administrators. Get your SSA users trained on Self Service Portal features and overall DBaaS model and SSA administrators should be familiar with Self Service Portal setup pieces, EM 12c database lifecycle management capabilities and overall EM 12c monitoring framework. GO LIVE – Announce rollout of Database-as-a-Service to your SSA users. Users can login to the Self Service Portal and request/monitor/view their databases in Exadata based database cloud. Congratulations! You just delivered a successful database cloud implementation project! In future posts, we will cover these additional useful topics around database cloud – DBaaS Implementation tips and tricks – right from setup to self service to managing the cloud lifecycle ‘How to’ enable real production databases copies in DBaaS with rapid provisioning in database cloud Case study of a customer who recently achieved success with their transformational journey from traditional silo’ed environment on to Exadata based database cloud using Enterprise Manager 12c. More Information – Podcast on Database as a Service using Oracle Enterprise Manager 12c Oracle Enterprise Manager 12c Installation and Administration guide, Cloud Administration guide DBaaS Cookbook Exadata Discovery Cookbook Screenwatch: Private Database Cloud: Set Up the Cloud Self-Service Portal Screenwatch: Private Database Cloud: Use the Cloud Self-Service Portal Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• My First Weeks at Red Gate

  - by Jess Nickson

  Hi, my name’s Jess and early September 2012 I started working at Red Gate as a Software Engineer down in The Agency (the Publishing team). This was a bit of a shock, as I didn’t think this team would have any developers! I admit, I was a little worried when it was mentioned that my role was going to be different from normal dev. roles within the company. However, as luck would have it, I was placed within a team that was responsible for the development and maintenance of Simple-Talk and SQL Server Central (SSC). I felt rather unprepared for this role. I hadn’t used many of the technologies involved and of those that I had, I hadn’t looked at them for quite a while. I was, nevertheless, quite excited about this turn of events. As I had predicted, the role has been quite challenging so far. I expected that I would struggle to get my head round the large codebase already in place, having never used anything so much as a fraction of the size of this before. However, I was perhaps a bit naive when it came to how quickly things would move. I was required to start learning/remembering a number of different languages and technologies within time frames I would never have tried to set myself previously. Having said that, my first week was pretty easy. It was filled with meetings that were designed to get the new starters up to speed with the different departments, ideals and rules within the company. I also attended some lightning talks being presented by other employees, which were pretty useful. These occur once a fortnight and normally consist of around four speakers. In my spare time, we set up the Simple-Talk codebase on my computer and I started exploring it and worked on my first feature – redirecting requests for URLs that used incorrect casing! It was also during this time that I was given my first introduction to test-driven development (TDD) with Michael via a code kata. Although I had heard of the general ideas behind TDD, I had definitely never tried it before. Indeed, I hadn’t really done any automated testing of code before, either. The session was therefore very useful and gave me insights as to some of the coding practices used in my team. Although I now understand the importance of TDD, it still seems odd in my head and I’ve yet to master how to sensibly step up the functionality of the code a bit at a time. The second week was both easier and more difficult than the first. I was given a new project to work on, meaning I was no longer using the codebase already in place. My job was to take some designs, a WordPress theme, and some initial content and build a page that allowed users of the site to read provided resources and give feedback. This feedback could include their thoughts about the resource, the topics covered and the page design itself. Although it didn’t sound the most challenging of projects when compared to fixing bugs in our current codebase, it nevertheless provided a few sneaky problems that had me stumped. I really enjoyed working on this project as it allowed me to play around with HTML, CSS and JavaScript; all things that I like working with but rarely have a chance to use. I completed the aims for the project on time and was happy with the final outcome – though it still needs a good designer to take a look at it! I am now into my third week at Red Gate and I have temporarily been pulled off the website from week 2. I am again back to figuring out the Simple-Talk codebase. Monday provided me with the chance to learn a bunch of new things: system level testing, Selenium and Python. I was set the challenge of testing a bug fix dealing with the search bars in Simple-Talk. The exercise was pretty fun, although Mike did have to point me in the right direction when I started making the tests a bit too complex. The rest of the week looks set to be focussed on pair programming with Mike as we work together on a new feature. I look forward to the challenges that still face me and hope that I will be able to get up to speed quickly. *fingers crossed*

  Read the article

• PASS: 2013 Summit Location

  - by Bill Graziano

  HQ recently posted a brief update on our search for a location for 2013.  It includes links to posts by four Board members and two community members. I’d like to add my thoughts to the mix and ask you a question.  But I can’t give you a real understanding without telling you some history first. So far we’ve had the Summit in Chicago, San Francisco, Orlando, Dallas, Denver and Seattle.  Each has a little different feel and distinct memories.  I enjoyed getting drinks by the pool in Orlando after the sessions ended.  I didn’t like that our location in Dallas was so far away from all the nightlife.  Denver was in downtown but we had real challenges with hotels.  I enjoyed the different locations.  I always enjoyed the announcement during the third keynote with the location of the next Summit. There are two big events that impacted my thinking on the Summit location.  The first was our transition to the new management company in early 2007.  The event that September in Denver was put on with a six month planning cycle by a brand new headquarters staff.  It wasn’t perfect but came off much better than I had dared to hope.  It also moved us out of the cookie cutter conferences that we used to do into a model where we have a lot more control.  I think you’ll all agree that the production values of our last few Summits have been fantastic.  That Summit also led to our changing relationship with Microsoft.  Microsoft holds two seats on the PASS Board.  All the PASS Board members face the same challenge: we all have full-time jobs and PASS comes in second place professionally (or sometimes further back).  Starting in 2008 we were assigned a liaison from Microsoft that had a much larger block of time to coordinate with us.  That changed everything between PASS and Microsoft.  Suddenly we were talking to product marketing, Microsoft PR, their event team, the Tech*Ed team, the education division, their user group team and their field sales team – locally and internationally.  We strengthened our relationship with CSS, SQLCAT and the engineering teams.  We had exposure at the executive level that we’d never had before.  And their level of participation at the Summit changed from under 100 people to 400-500 people.  I think those 400+ Microsoft employees have value at a conference on Microsoft SQL Server.  For the first time, Seattle had a real competitive advantage over other cities. I’m one that looked very hard at staying in Seattle for a long, long time.  I think those Microsoft engineers have value to our attendees.  I think the increased support that Microsoft can provide when we’re in Seattle has value to our attendees.  But that doesn’t tell the whole story.  There’s a significant (and vocal!) percentage of our membership that wants the Summit outside Seattle.  Post-2007 PASS doesn’t know what it’s like to have a Summit outside of Seattle.  I think until we have a Summit in another city we won’t really know the trade-offs. I think a model where we move every third or every other year is interesting.  But until we have another Summit outside Seattle and we can evaluate the logistics and how important it is to have depth and variety in our Microsoft participation we won’t really know. Another benefit that comes with a move is variety or diversity.  I learn more when I’m exposed to new things and new people.  I believe that moving the Summit will give a different set of people an opportunity to attend. Grant Fritchey writes “It seems that the board is leaning, extremely heavily, towards making it a permanent fixture in Seattle.”  I don’t believe that’s true.  I know there was discussion of that earlier but I don’t believe it’s true now. And that brings me to my question.  Do we announce the city now or do we wait until the 2012 Summit?  I’m happy to announce Seattle vs. not-Seattle as soon as we sign the contract.  But I’d like to leave the actual city announcement until the 2011 Summit.  I like the drama and mystery of it.  I also like that it doesn’t give you a reason to skip a Summit and wait for the next one if it’s closer or back in Seattle.  The other side of the coin is that your planning is easier if you know where it is.  What do you think?

  Read the article

• Customer Engagement: Are Your Customers Engaged With Your Brands?

  - by Michael Snow

  Engaging Customers is Critical for Business Growth This week we'll be spending some time looking at Customer Engagement. We all have stories about how we try to engage our customers better than ever before.  We all know that successfully engaging customers is critical to an organization’s business success. We also know that engaging our customers is more challenging today than ever before. There is so much noise to compete with for getting anyone's attention. Over the last decade and a half we’ve watched as the online channel became a primary one for conducting our business and even managing our lives. And during this whole process or evolution, the customer journey has grown increasingly complex. Customers themselves have assumed increasing power and influence over the purchase process and for setting the tone and pace of the relationships they have with brands and you see the evidence of this in the really high expectations that customers have today. They expect brand experiences that are personalized and relevant -- In other words they want experiences that demonstrate that the brand understands their interests, preferences and past interactions with them. They also expect their experience with a brand and the community surrounding it to be social and interactive – it’s no longer acceptable to have a static, one-way dialogue with your customer base or to fail to connect your customers with fellow customers, or with your employees and partners. And on top of all this, customers expect us to deliver this rich and engaging, personalized and interactive experience, in a consistent way across a variety of channels including web, mobile and social channels or even offline venues such as in-store or via a call center. And as a result, we see that delivery on these expectations and successfully engaging your customers is a great challenge today. Customers expect a personal, engaging and consistent online customer experience. Today’s consumer expects to engage with your brand and the community surrounding it in an interactive and social way. Customers have come to expect a lot for the online customer experience.  ·        They expect it to be personal: o   Accessible:  - Regardless of my device  Via my existing online identities  o   Relevant:  Content that interests me  o   Customized:  To be able to tailor my online experience  ·        They expect it to be engaging: o   Social:  So I can share content with my social networks  o   Intuitive:  To easily find what I need   o   Interactive:  So I can interact with online communities And they expect it to be consistent across the online experience – so you better have your brand and information ducks in a row. These expectations are not only limited to your customers by any means. Your employees (and partners) are also expecting to be empowered with engagement tools across their internal and external communications and interactions with customers, partners and other employees. We had a great conversation with Ted Schadler from Forrester Research entitled: "Mobile is the New Face of Engagement" that is now available On-Demand. Take a look at all the webcasts available to watch from our Social Business Thought Leader Series. Social capabilities have become so pervasive and changed customers’ expectations for their online experiences. The days of one-direction communication with customers are at an end. Today’s customers expect to engage in a dialogue with your brand and the community surrounding it in an interactive and social way. You have at a very short window of opportunity to engage a customer before they go to another site in their pursuit of information, product, or services. In fact, customers who engage with brands via social media tend to spend more that customers who don’t, between 20% and 40% more.  And your customers are also increasingly influenced by their social networks too – 40% of consumers say they factor in Facebook recommendations when making purchasing decisions.  This means a few different things for today’s businesses. Incorporating forms of social interaction such as commenting or reviews as well as tightly integrating your online experience with your customers’ social networking experiences into the online customer experience are crucial for maintaining the eyeballs on your desired pages. --- Notes/Sources: 93% - Cone Finds that Americans Expect Companies to Have a Presence in Social Media - http://www.coneinc.com/content1182 40% of consumers factor in Facebook recommendations when making decisions about purchasing (Increasing Campaign Effectiveness with Social Media, Syncapse, March 2011) 20%-40% - Customers who engage with a company via social media spend this percentage more with that company than other customers (Source: Bain & Company Report – Putting Social Media to Work)

  Read the article

• Site-to-site VPN using MD5 instead of SHA and getting regular disconnection

  - by Steven

  We are experiencing some strange behavior with a site-to-site IPsec VPN that goes down about every week for 30 minutes (Iam told 30 minutes exactly). I don't have access to the logs, so it's difficult to troubleshoot. What is also strange is that the two VPN devices are set to use SHA hash algorithm but apparently end up agreeing to use MD5. Does anybody have a clue? or is this just insufficient information? Edit: Here is an extract of the log of one of the two VPN devices, which is a Cisco 3000 series VPN concentrator. 27981 03/08/2010 10:02:16.290 SEV=4 IKE/41 RPT=16120 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 27983 03/08/2010 10:02:56.930 SEV=4 IKE/41 RPT=16121 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 27986 03/08/2010 10:03:35.370 SEV=4 IKE/41 RPT=16122 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) [… same continues for another 15 minutes …] 28093 03/08/2010 10:19:46.710 SEV=4 IKE/41 RPT=16140 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 28096 03/08/2010 10:20:17.720 SEV=5 IKE/172 RPT=1291 xxxxxxxx Group [xxxxxxxx] Automatic NAT Detection Status: Remote end is NOT behind a NAT device This end IS behind a NAT device 28100 03/08/2010 10:20:17.820 SEV=3 IKE/134 RPT=79 xxxxxxxx Group [xxxxxxxx] Mismatch: Configured LAN-to-LAN proposal differs from negotiated proposal. Verify local and remote LAN-to-LAN connection lists. 28103 03/08/2010 10:20:17.820 SEV=4 IKE/119 RPT=1197 xxxxxxxx Group [xxxxxxxx] PHASE 1 COMPLETED 28104 03/08/2010 10:20:17.820 SEV=4 AUTH/22 RPT=1031 xxxxxxxx User [xxxxxxxx] Group [xxxxxxxx] connected, Session Type: IPSec/LAN- to-LAN 28106 03/08/2010 10:20:17.820 SEV=4 AUTH/84 RPT=39 LAN-to-LAN tunnel to headend device xxxxxxxx connected 28110 03/08/2010 10:20:17.920 SEV=5 IKE/25 RPT=1291 xxxxxxxx Group [xxxxxxxx] Received remote Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28113 03/08/2010 10:20:17.920 SEV=5 IKE/24 RPT=88 xxxxxxxx Group [xxxxxxxx] Received local Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28116 03/08/2010 10:20:17.920 SEV=5 IKE/66 RPT=1290 xxxxxxxx Group [xxxxxxxx] IKE Remote Peer configured for SA: L2L: 1A 28117 03/08/2010 10:20:17.930 SEV=5 IKE/25 RPT=1292 xxxxxxxx Group [xxxxxxxx] Received remote Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28120 03/08/2010 10:20:17.930 SEV=5 IKE/24 RPT=89 xxxxxxxx Group [xxxxxxxx] Received local Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28123 03/08/2010 10:20:17.930 SEV=5 IKE/66 RPT=1291 xxxxxxxx Group [xxxxxxxx] IKE Remote Peer configured for SA: L2L: 1A 28124 03/08/2010 10:20:18.070 SEV=4 IKE/173 RPT=17330 xxxxxxxx Group [xxxxxxxx] NAT-Traversal successfully negotiated! IPSec traffic will be encapsulated to pass through NAT devices. 28127 03/08/2010 10:20:18.070 SEV=4 IKE/49 RPT=17332 xxxxxxxx Group [xxxxxxxx] Security negotiation complete for LAN-to-LAN Group (xxxxxxxx) Responder, Inbound SPI = 0x56a4fe5c, Outbound SPI = 0xcdfc3892 28130 03/08/2010 10:20:18.070 SEV=4 IKE/120 RPT=17332 xxxxxxxx Group [xxxxxxxx] PHASE 2 COMPLETED (msgid=37b3b298) 28131 03/08/2010 10:20:18.750 SEV=4 IKE/41 RPT=16141 xxxxxxxx Group [xxxxxxxx] IKE Initiator: New Phase 2, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 28135 03/08/2010 10:20:18.870 SEV=4 IKE/173 RPT=17331 xxxxxxxx Group [xxxxxxxx] NAT-Traversal successfully negotiated! IPSec traffic will be encapsulated to pass through NAT devices.

  Read the article

• To Bit or Not To Bit

  - by Johnm

  'Twas a long day of troubleshooting and firefighting and now, with most of the office vacant, you face a blank scripting window to create a new table in his database. Many questions circle your mind like dirty water gurgling down the bathtub drain: "How normalized should this table be?", "Should I use an identity column?", "NVarchar or Varchar?", "Should this column be NULLABLE?", "I wonder what apple blue cheese bacon cheesecake tastes like?" Well, there are times when the mind goes it's own direction. A Bit About Bit At some point during your table creation efforts you will encounter the decision of whether to use the bit data type for a column. The bit data type is an integer data type that recognizes only the values of 1, 0 and NULL as valid. This data type is often utilized to store yes/no or true/false values. An example of its use would be a column called [IsGasoline] which would be intended to contain the value of 1 if the row's subject (a car) had a gasoline engine and a 0 if the subject did not have a gasoline engine. The bit data type can even be found in some of the system tables of SQL Server. For example, the sysssispackages table in the msdb database which contains SQL Server Integration Services Package information for the packages stored in SQL Server. This table contains a column called [IsEncrypted]. A value of 1 indicates that the package has been encrypted while the value of 0 indicates that it is not. I have learned that the most effective way to disperse the crowd that surrounds the office coffee machine is to engage into SQL Server debates. The bit data type has been one of the most reoccurring, as well as the most enjoyable, of these topics. It contains a practical side and a philosophical side. Practical Consideration This data type certainly has its place and is a valuable option for database design; but it is often used in situations where the answer is really not a pure true/false response. In addition, true/false values are not very informative or scalable. Let's use the previously noted [IsGasoline] column for illustration. While on the surface it appears to be a rather simple question when evaluating a car: "Does the car have a gasoline engine?" If the person entering data is entering a row for a Jeep Liberty, the response would be a 1 since it has a gasoline engine. If the person is entering data is entering a row for a Chevrolet Volt, the response would be a 0 since it is an electric engine. What happens when a person is entering a row for the gasoline/electric hybrid Toyota Prius? Would one person's conclusion be consistent with another person's conclusion? The argument could be made that the current intent for the database is to be used only for pure gasoline and pure electric engines; but this is where the scalability issue comes into play. With the use of a bit data type a database modification and data conversion would be required if the business decided to take on hybrid engines. Whereas, alternatively, if the int data type were used as a foreign key to a reference table containing the engine type options, the change to include the hybrid option would only require an entry into the reference table. Philosophical Consideration Since the bit data type is often used for true/false or yes/no data (also called Boolean) it presents a philosophical conundrum of what to do about the allowance of the NULL value. The inclusion of NULL in a true/false or yes/no response simply violates the logical principle of bivalence which states that "every proposition is either true or false". If NULL is not true, then it must be false. The mathematical laws of Boolean logic support this concept by stating that the only valid values of this scenario are 1 and 0. There is another way to look at this conundrum: NULL is also considered to be the absence of a response. In other words, it is the equivalent to "undecided". Anyone who watches the news can tell you that polls always include an "undecided" option. This could be considered a valid option in the world of yes/no/dunno. Through out all of these considerations I have discovered one absolute certainty: When you have found a person, or group of persons, who are willing to entertain a philosophical debate of the bit data type, you have found some true friends.

  Read the article

• Come meet our Interns in Dublin

  - by klaudia.drulis

  Oracle Worldwide Product Translation Group (WPTG) provides solutions for all Oracle product and Content translation requirements. WPTG is a global organisation with its headquarters in Ireland and employees in Oracle offices worldwide. WPTG offer expertise in fields such as process engineering, tools development, linguistic quality, terminology, global product release, financial and vendor management. WPTG provides translation solution for over 40 languages including Asia Pacific, European, American and Middle Eastern languages. WPTG first introduced an intern program over 10 years ago and it has become a key component of our teams structure. The majority of Interns are sourced from a Computer Science related course, these Interns joining the engineering team. Others are sourced from Business courses and work within the Business / Project management area. The intern program allows us to maintain ties with current course curriculum and brings fresh energy and perspective into our Organisation. Four of the full time staff working in Dublin today joined us originally as Interns and subsequently were offered permanent positions. Come Meet some of our 2010 Interns, Come and see what Darragh, Anthony, Caoimhe, James and Artemij thought about working within the WPTG at Oracle: Darragh “Oracle has been a fun, challenging work placement for me. From day one I was treated as a full member of staff, this was both comforting and a little bit scary. The responsibilities stack up but I found I was able to keep on top of everything and even make improvements to how we handle a few things thanks to a great team and a very supportive manager. There’s a very positive atmosphere in work that’s really conducive to getting a lot of work done. Ideas seem to be the central hub in my line of business so all of my ideas and innovations were greeted with enthusiasm. Oracle has given me a fantastic opportunity and I urge you to grab it with both hands, you’ll find that you’re with a set of like minded people from all works of life that make work both interesting and fun. Even when the pressure is on you know that you can always get help and advice from someone nearby. My last word of advice is don’t be afraid to stick your neck out, everyone here is willing to learn, try something new and innovate, your voice will be heard and who knows, you could end up having a large impact on Oracle and your career.” Anthony “I had a great experience working with Oracle, from day one I was treated like a full member of staff with responsibilities of my own. I found that the more I put into the work the more I got out from the experience. Volunteering and being willing to face challenges have made this a more exciting placement. I am given a lot of leeway to do my own projects and so I’ve found that I am really enjoying my time here.” Caoimhe “I am currently spending my year of placement within the Release Management Team in the WPTG. My main role is to handle the finance process of all translation projects under 100k which includes creating workspecs and PO's, sending out kits, dealing with vendor queries and handling the invoicing and payment part. I am really enjoying my time here at Oracle, everyone is very open and friendly and willing to help you out with any questions you may have. I would definitely be interested in returning to Oracle after I graduate!” James “I am currently on a 12 month placement with Oracle, working as part of the Worldwide Product Translation Group in the Business Management. The Business Management team provides a global view on WPTG’s vendor and business strategy and is an interface into WPTG for new business. The business management team work together to support the external translation partner network. My role is to support the Business Management team and also to work on various projects when the need arises. This involves working with translation vendors and working with other Oracle employees worldwide. I am really enjoying my time working for Oracle, at times it can be challenging bit also very rewarding. I would recommend any student wanting to undertake a placement year to apply to Oracle, I made some great friends and I will never forget my time in Dublin.” Artemij “From working within Oracle, I have truly understood what "career path" is, and what opportunities a large corporation like Oracle can offer. Without any illusions, the work itself is exciting, sometimes challenging, tests your ability to handle pressure, to make decisions and take responsibility, to learn quickly and cooperate efficiently in order to solve a problem. I have learned a lot about myself. What I am good at, where and what I can do better. My placement at Oracle has allowed me to get a clearer picture of what I want, and which door I am going to open after college. If you have any questions related to this article feel free to contact  [email protected].  You can find our job opportunities via http://campus.oracle.com

  Read the article

• Ok it has been pointed out to me

  - by Ratman21

  That it seems my blog is more of poor me or pity me or I deserve a job blog.   Hmmm I wont say, I have not wined here as I have used this blog to vent my frustration on the whole out of work thing (lack of money, self worth, family issues and the never end bills coming my way) but, it was also me trying to reach to others in the same boat as well as advertising, hay I am out here, employers.   It was also said, that I don’t have any thing listed here on me, like a cover letter or resume. Well there is but, it was so many months and post ago. Also what I had posted is not current. So here is my most current cover and resume.   Scott L Newman 45219 Dutton Way Callahan, Fl. 32011 To Whom It May Concern: I am really interested in the IT vacancie that you have listed for your company. Maybe I don’t have all the qualifications you want (hold on don’t hit delete yet) yet! But maybe I do, as I have over 20 + years experience in "IT” RIGHT NOW.   Read the rest of my cover and my resume. You will see what my “IT” skills are and it will Show that I can to this work! I can bring to your company along with my, can do attitude, a broad range of skills, including: Certified CompTIA A+, Security+  and Network+ Technician §         2.5 years (NOC) Network experience on large Cisco based Wan – UK to Austria §         20 years experience MIS/DP – Yes I can do IBM mainframes and Tandem  non-stops too §         18 years experience as technical Help Desk support – panicking users, no problem §         18 years experience with PC/Server based system, intranet and internet systems §         10+ years experienced on: Microsoft Office, Windows XP and Data Network Fundamentals (YES I do windows) §         Strong trouble shooting skills for software, hard ware and circuit issues (and I can tell you what kind of horrors I had to face on all of them). §         Very experienced on working with customers on problems – again panicking users, no problem §         Working experience with Remote Access (VPN/SecurID) – I didn’t just study them I worked on/with them §         Skilled in getting info for and creating documentation for Operation procedures (I don’t just wait for them to give it to me I go out and get it. Waiting for info on working applications is, well dumb) Multiple software languages (Hey I have done some programming) And much more experiences in “IT” (Mortgage, stocks and financial information systems experience and have worked “IT” in a hospital) Can multitask, also have ability to adapt to change and learn quickly. (once was put in charge of a system that I had not worked with for over two years. Talk about having to relearn and adapt to changes but, I did it.) I would welcome the opportunity to further discuss this position with you. If you have questions or would like to schedule an interview, please contact me by phone at 904-879-4880 or on my cell 352-356-0945 or by e-mail at [email protected] or leave a message on my web site (http://beingscottnewman.webs.com/). I have enclosed/attached my resume for your review and I look forward to hearing from you.   Thank you for taking a moment to consider my cover letter and resume. I appreciate how busy you are. Sincerely, Scott L. Newman    Scott L. Newman 45219 Dutton Way, Callahan, FL 32011? H (904)879-4880 C (352)356-0945 ? [email protected] Web - http://beingscottnewman.webs.com/                                                       ______                                                                                       OBJECTIVE To obtain a Network Operation or Helpdesk position.     PROFILE Information Technology Professional with 20+ years of experience. Volunteer website creator and back-up sound technician at True Faith Christian Fellowship. CompTIA A+, Network+ and Security+ Certified.   TECHNICAL AND PROFESSIONAL SKILLS   §         Technical Support §         Frame Relay §         Microsoft Office Suite §         Inventory Management §         ISDN §         Windows NT/98/XP §         Client/Vendor Relations §         CICS §         Cisco Routers/Switches §         Networking/Administration §         RPG §         Helpdesk §         Website Design/Dev./Management §         Assembler §         Visio §         Programming §         COBOL IV §               EDUCATION ? New HorizonsComputerLearningCenter, Jacksonville, Florida – CompTIA A+, Security+ and Network+ Certified.             Currently working on CCNA Certification ?MottCommunity College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese     PROFESSIONAL             TrueFaithChristianFellowshipChurch – Callahan, FL, October 2009 – Present Web site Tech ·        Web site Creator/tech, back up song leader and back up sound technician. Note church web site is (http://ambassadorsforjesuschrist.webs.com/) U.S. Census (temp employee) Feb. 23 to March 8, 2010 ·        Enumerator for NassauCounty   ThomasCreekBaptistChurch – Callahan, FL,     June 2008 – September 2009 Churchsound and video technician      ·        sound and video technician           Fidelity National Information Services ? Jacksonville, FL ? February 01, 2005 to October 28, 2008 Client Server Dev/Analyst I ·        Monitored Multiple Debit Card sites, Check Authorization customers and the Card Auth system (AuthNet) for problems with the sites, connections, servers (on our LAN) and/or applications ·        Night (NOC) Network operator for a large Wide Area Network (WAN) ·        Monitored Multiple Check Authorization customers for problems with circuits, routers and applications ·        Resolved circuit and/or router issues or assist circuit carrier in resolving issue ·        Resolved application problems or assist application support in resolution ·        Liaison between customer and application support ·        Maintained and updated the NetOps Operation procedures Guide ·        Kept the listing of equipment on the raised floor updated ·        Involved in the training of all Night Check and Card server operation operators ·        FNIS acquired Certegy in 2005. Was one of 3 kept on.   Certegy ? St.Pete, FL ? August 31, 2003 to February 1, 2005 Senior NetOps Operator(FNIS acquired Certegy in 2005 all of above jobs/skills were same as listed in FNIS) ·        Converting Documentation to Adobe format ·        Sole trainer of day/night shift System Management Center operators (SMC) ·        Equifax spun off Card/Check Dept. as Certegy. Certegy terminated contract with EDS. One of six in the whole IT dept that was kept on.   EDS  (Certegy Account) ? St.Pete, FL ? July 1, 1999 to August 31, 2003 Senior NetOps Operator ·        Equifax outsourced the NetOps dept. to EDS in 1999. ·        Same job skills as listed above for FNIS.   Equifax ? St.Pete&Tampa, FL ? January 1, 1991 to July 1, 1999 NetOps/Tandem Operator ·        All of the above for FNIS, except for circuit and router issues ·        Operated, monitored and trouble shot Tandem mainframe and servers on LAN ·        Supported in the operation of the Print, Tape and Microfiche rooms ·        Equifax acquired TelaCredit in 1991.   TelaCredit ? Tampa, FL ? June 28, 1989 to January 1, 1991 Tandem Operator ·        Operated and monitored Tandem Non-stop systems for Card and Check Auths ·        Operated multiple high-speed Laser printers and Microfiche printers ·        Mounted, filed and maintained 18 reel-to-reel mainframe tape drives, cartridges tape drives and tape library.

  Read the article

• Taking a Flying Leap

  - by Lance Shaw

  Yesterday, I went skydiving with three of my children.  It was thrilling, scary, invigorating and exciting. While there is obvious risk involved, the reward and feeling of success was well worth it. You might already be wondering what skydiving would have to with WebCenter, so let me explain. Implementing a skydiving program and becoming an instructor does not happen overnight.  It does not happen with the purchase of the needed technology. Not one of us would go out, buy a parachute, the harnesses, helmet and all the gear and be able to convince anyone that we are now ready to be a skydiving instructor. The fact is that obtaining the technology is merely a small piece of the overall process and so is the case with managing content in your company. You don't just buy the right software (Oracle WebCenter Content) and go to your boss and declare information management success. There is planning, research and effort that goes into deploying software of any kind and especially when it is as mission-critical to the success of your business as Enterprise Content Management. To become a certified skydiving instructor takes at least 3 years of commitment and often longer. In the United States, candidates must complete over 500 solo jumps of their own over a minimum of 36 months and then must complete additional rigorous training under observation.  When you consider the amount of time and effort involved, it's not unlike getting a college degree and anyone that has trusted their lives to one of these instructors will no doubt appreciate their dedication to the curriculum.  Implementing an ECM system won't take that long, but it certainly requires commitment, analysis and consideration. But guess what?  Humans are involved and that means that mistakes can happen and that rules change.  This struck me while reading an excellent post on darkreading.com by Glenn S. Phillips entitled "Mission Impossible: 4 Reasons Compliance is Impossible".  His over-arching point was that with information management and security, environments change and people are involved meaning the work is never done.  He stated that you can never claim your compliance efforts are complete because of the following reasons. People are involved.  And lets face it, some are more trustworthy than others. Change is Constant. There is always some new technology coming along that is disruptive. Consumer grade cloud file sharing and sync tools come to mind here. Compliance is interpreted, not defined.  Laws and the judges that read them are always on the move. Technology is a tool, not a complete solution. There is no magic pill. The skydiving analogy holds true here as well.  Ultimately, a single person packs your parachute.  For obvious reasons, you prefer that this person be trustworthy but there are no absolute guarantees of a 100% error-free scenario.  Weather and wind conditions are never a constant and the best-laid plans for a great day of skydiving are easily disrupted by forces outside of your control.  Rules and regulations vary by location and may be updated at any time and as I mentioned early on, even the best technology on its own will only get you started. The good news is that, like skydiving, with the right technology, the right planning, the right team and a proper understanding of the rules and regulations that govern your industry, your ECM deployment can be a great success.  Failure to plan for any of the 4 factors that Glenn outlined in his article will certainly put your deployment and maybe even your company at risk, so consider them carefully. As a final aside, for those of you who consider skydiving an incredibly dangerous and risky pastime, consider this comparative statistic.  In 2012, the U.S. Parachute Association recorded 19 fatal skydiving accidents in the U.S. out of roughly 3.1 million jumps.  That’s 0.006 fatalities per 1,000 jumps. By comparison, the U.S. National Highway Traffic Safety Administration reports that there were 34,080 deaths due to car accidents in 2012.  Based on the percentages, one could argue that it is safer to jump out of a plane than to drive to the airport where the skydiving will take place. While the way you manage, secure, classify, control, retain and dispose of company files may not carry as much risk as driving or skydiving, it certainly carries risk for the organization when not planned and deployed appropriately.  Consider all the factors involved in your organization as you make your content management plans.  For additional areas of consideration, be sure to download our free whitepaper on the topic entitled "The Top 10 Criteria for Choosing an ECM System" which is available for download here.

  Read the article

• How to Recover From a Virus Infection: 3 Things You Need to Do

  - by Chris Hoffman

  If your computer becomes infected with a virus or another piece of malware, removing the malware from your computer is only the first step. There’s more you need to do to ensure you’re secure. Note that not every antivirus alert is an actual infection. If your antivirus program catches a virus before it ever gets a chance to run on your computer, you’re safe. If it catches the malware later, you have a bigger problem. Change Your Passwords You’ve probably used your computer to log into your email, online banking websites, and other important accounts. Assuming you had malware on your computer, the malware could have logged your passwords and uploaded them to a malicious third party. With just your email account, the third party could reset your passwords on other websites and gain access to almost any of your online accounts. To prevent this, you’ll want to change the passwords for your important accounts — email, online banking, and whatever other important accounts you’ve logged into from the infected computer. You should probably use another computer that you know is clean to change the passwords, just to be safe. When changing your passwords, consider using a password manager to keep track of strong, unique passwords and two-factor authentication to prevent people from logging into your important accounts even if they know your password. This will help protect you in the future. Ensure the Malware Is Actually Removed Once malware gets access to your computer and starts running, it has the ability to do many more nasty things to your computer. For example, some malware may install rootkit software and attempt to hide itself from the system. Many types of Trojans also “open the floodgates” after they’re running, downloading many different types of malware from malicious web servers to the local system. In other words, if your computer was infected, you’ll want to take extra precautions. You shouldn’t assume it’s clean just because your antivirus removed what it found. It’s probably a good idea to scan your computer with multiple antivirus products to ensure maximum detection. You may also want to run a bootable antivirus program, which runs outside of Windows. Such bootable antivirus programs will be able to detect rootkits that hide themselves from Windows and even the software running within Windows. avast! offers the ability to quickly create a bootable CD or USB drive for scanning, as do many other antivirus programs. You may also want to reinstall Windows (or use the Refresh feature on Windows 8) to get your computer back to a clean state. This is more time-consuming, especially if you don’t have good backups and can’t get back up and running quickly, but this is the only way you can have 100% confidence that your Windows system isn’t infected. It’s all a matter of how paranoid you want to be. Figure Out How the Malware Arrived If your computer became infected, the malware must have arrived somehow. You’ll want to examine your computer’s security and your habits to prevent more malware from slipping through in the same way. Windows is complex. For example, there are over 50 different types of potentially dangerous file extensions that can contain malware to keep track of. We’ve tried to cover many of the most important security practices you should be following, but here are some of the more important questions to ask: Are you using an antivirus? – If you don’t have an antivirus installed, you should. If you have Microsoft Security Essentials (known as Windows Defender on Windows 8), you may want to switch to a different antivirus like the free version of avast!. Microsoft’s antivirus product has been doing very poorly in tests. Do you have Java installed? – Java is a huge source of security problems. The majority of computers on the Internet have an out-of-date, vulnerable version of Java installed, which would allow malicious websites to install malware on your computer. If you have Java installed, uninstall it. If you actually need Java for something (like Minecraft), at least disable the Java browser plugin. If you’re not sure whether you need Java, you probably don’t. Are any browser plugins out-of-date? – Visit Mozilla’s Plugin Check website (yes, it also works in other browsers, not just Firefox) and see if you have any critically vulnerable plugins installed. If you do, ensure you update them — or uninstall them. You probably don’t need older plugins like QuickTime or RealPlayer installed on your computer, although Flash is still widely used. Are your web browser and operating system set to automatically update? – You should be installing updates for Windows via Windows Update when they appear. Modern web browsers are set to automatically update, so they should be fine — unless you went out of your way to disable automatic updates. Using out-of-date web browsers and Windows versions is dangerous. Are you being careful about what you run? – Watch out when downloading software to ensure you don’t accidentally click sketchy advertisements and download harmful software. Avoid pirated software that may be full of malware. Don’t run programs from email attachments. Be careful about what you run and where you get it from in general. If you can’t figure out how the malware arrived because everything looks okay, there’s not much more you can do. Just try to follow proper security practices. You may also want to keep an extra-close eye on your credit card statement for a while if you did any online-shopping recently. As so much malware is now related to organized crime, credit card numbers are a popular target.     

  Read the article

• Setting up VPN client: L2TP with IPsec

  - by zachar

  I've got to connect to vpn server. It works on Windows, but in Ubuntu 10.04 not. Number of options is confusing for me. There is the input that I have: IP Address of VPN Pre-shared key to authenticate Information that MS-CHAPv2 is used Login and Password to VPN I was trying to achive that with network manager and with L2TP IPsec VPN Manager 1.0.9 but at failed. There is some logged information from L2TP IPsec VPN Manager 1.0.9: Nov 09 15:21:46.854 ipsec_setup: Stopping Openswan IPsec... Nov 09 15:21:48.088 Stopping xl2tpd: xl2tpd. Nov 09 15:21:48.132 ipsec_setup: Starting Openswan IPsec U2.6.23/K2.6.32-49-generic... Nov 09 15:21:48.308 ipsec__plutorun: Starting Pluto subsystem... Nov 09 15:21:48.318 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Nov 09 15:21:48.338 ipsec__plutorun: 002 added connection description "my_vpn_name" Nov 09 15:21:48.348 ipsec__plutorun: 003 NAT-Traversal: Trying new style NAT-T Nov 09 15:21:48.348 ipsec__plutorun: 003 NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Nov 09 15:21:48.349 ipsec__plutorun: 003 NAT-Traversal: Trying old style NAT-T Nov 09 15:21:48.994 104 "my_vpn_name" #1: STATE_MAIN_I1: initiate Nov 09 15:21:48.994 003 "my_vpn_name" #1: received Vendor ID payload [RFC 3947] method set to=109 Nov 09 15:21:48.994 003 "my_vpn_name" #1: received Vendor ID payload [Dead Peer Detection] Nov 09 15:21:48.994 106 "my_vpn_name" #1: STATE_MAIN_I2: sent MI2, expecting MR2 Nov 09 15:21:48.994 003 "my_vpn_name" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed Nov 09 15:21:48.994 108 "my_vpn_name" #1: STATE_MAIN_I3: sent MI3, expecting MR3 Nov 09 15:21:48.994 004 "my_vpn_name" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Nov 09 15:21:48.995 117 "my_vpn_name" #2: STATE_QUICK_I1: initiate Nov 09 15:21:48.995 004 "my_vpn_name" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x0c96795d <0x483e1a42 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} Nov 09 15:21:49.996 [ERROR 210] Failed to open l2tp control file 'c my_vpn_name' and from syslog: Nov 9 15:21:46 o99 L2tpIPsecVpnControlDaemon: Opening client connection Nov 9 15:21:46 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec setup stop Nov 9 15:21:46 o99 ipsec_setup: Stopping Openswan IPsec... Nov 9 15:21:48 o99 kernel: [ 4350.245171] NET: Unregistered protocol family 15 Nov 9 15:21:48 o99 ipsec_setup: ...Openswan IPsec stopped Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec setup stop finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command invoke-rc.d xl2tpd stop Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command invoke-rc.d xl2tpd stop finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Opening client connection Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Closing client connection Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec setup start Nov 9 15:21:48 o99 kernel: [ 4350.312483] NET: Registered protocol family 15 Nov 9 15:21:48 o99 ipsec_setup: Starting Openswan IPsec U2.6.23/K2.6.32-49-generic... Nov 9 15:21:48 o99 ipsec_setup: Using NETKEY(XFRM) stack Nov 9 15:21:48 o99 kernel: [ 4350.410774] Initializing XFRM netlink socket Nov 9 15:21:48 o99 kernel: [ 4350.413601] padlock: VIA PadLock not detected. Nov 9 15:21:48 o99 kernel: [ 4350.427311] padlock: VIA PadLock Hash Engine not detected. Nov 9 15:21:48 o99 kernel: [ 4350.441533] padlock: VIA PadLock not detected. Nov 9 15:21:48 o99 ipsec_setup: ...Openswan IPsec started Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec setup start finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command invoke-rc.d xl2tpd start Nov 9 15:21:48 o99 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Nov 9 15:21:48 o99 pluto: adjusting ipsec.d to /etc/ipsec.d Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command invoke-rc.d xl2tpd start finished with exit code 0 Nov 9 15:21:48 o99 ipsec__plutorun: 002 added connection description "my_vpn_name" Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec auto --ready Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: Trying new style NAT-T Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: Trying old style NAT-T Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec auto --ready finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec auto --up my_vpn_name Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec auto --up my_vpn_name finished with exit code 0 Nov 9 15:21:49 o99 L2tpIPsecVpnControlDaemon: Closing client connection Can anyone tell me something more about that? Where is the mistake?

  Read the article

• Changing the Game: Why Oracle is in the IT Operations Management Business

  - by DanKoloski

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Next week, in Orlando, is the annual Gartner IT Operations Management Summit. Oracle is a premier sponsor of this annual event, which brings together IT executives for several days of high level talks about the state of operational management of enterprise IT. This year, Sushil Kumar, VP Product Strategy and Business Development for Oracle’s Systems & Applications Management, will be presenting on the transformation in IT Operations required to support enterprise cloud computing. IT Operations transformation is an important subject, because year after year, we hear essentially the same refrain – large enterprises spend an average of two-thirds (67%!) of their IT resources (budget, energy, time, people, etc.) on running the business, with far too little left over to spend on growing and transforming the business (which is what the business actually needs and wants). In the thirtieth year of the distributed computing revolution (give or take, depending on how you count it), it’s amazing that we have still not moved the needle on the single biggest component of enterprise IT resource utilization. Oracle is in the IT Operations Management business because when management is engineered together with the technology under management, the resulting efficiency gains can be truly staggering. To put it simply – what if you could turn that 67% of IT resources spent on running the business into 50%? Or 40%? Imagine what you could do with those resources. It’s now not just possible, but happening. This seems like a simple idea, but it is a radical change from “business as usual” in enterprise IT Operations. For the last thirty years, management has been a bolted-on afterthought – we pick and deploy our technology, then figure out how to manage it. This pervasive dysfunction is a broken cycle that guarantees high ongoing operating costs and low agility. If we want to break the cycle, we need to take a more tightly-coupled approach. As a complete applications-to-disk platform provider, Oracle is engineering management together with technology across our stack and hooking that on-premise management up live to My Oracle Support. Let’s examine the results with just one piece of the Oracle stack – the Oracle Database. Oracle began this journey with the Oracle Database 9i many years ago with the introduction of low-impact instrumentation in the database kernel (“tell me what’s wrong”) and through Database 10g, 11g and 11gR2 has successively added integrated advisory (“tell me how to fix what’s wrong”) and lifecycle management and automated self-tuning (“fix it for me, and do it on an ongoing basis for all my assets”). When enterprises take advantage of this tight-coupling, the results are game-changing. Consider the following (for a full list of public references, visit this link): British Telecom improved database provisioning time 1000% (from weeks to minutes) which allows them to provide a new DBaaS service to their internal customers with no additional resources Cerner Corporation Saved $9.5 million in CapEx and OpEx AND launched a brand-new cloud business at the same time Vodafone Group plc improved response times 50% and reduced maintenance planning times 50-60% while serving 391 million registered mobile customers Or the recent Database Manageability and Productivity Cost Comparisons: Oracle Database 11g Release 2 vs. SAP Sybase ASE 15.7, Microsoft SQL Server 2008 R2 and IBM DB2 9.7 as conducted by independent analyst firm ORC. In later entries, we’ll discuss similar results across other portions of the Oracle stack and how these efficiency gains are required to achieve the agility benefits of Enterprise Cloud. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >