Search Results

Search found 46019 results on 1841 pages for 'version control'.

Page 1253/1841 | < Previous Page | 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260  | Next Page >

  • TFTP Timing Out on Ubuntu VM

    - by valsidalv
    I'm running a Windows 7 PC with VMware installed which has my Ubuntu (10.04 Lucid Lynx). I recently installed a DHCP server and TFTP (Xinet tftpd) using these instructions. I've mapped a network drive so that my Windows has access to all the files in my VM through a 192.x.x.x IP address. I'm trying to throw some custom firmware onto a router. The router has its own built-in TFTP utility that will download the image. It successfully manages to do everything but it is slow because it writes it to flash memory. There is another method that is much quicker because it writes to RAM directly but it must use the TFTP server in Ubuntu. The issue I'm facing is that the Ubuntu TFTP transfer seems to be timing out. The transfer starts but never goes past ~60%. Here's my /etc/xinetd.d/tftp file (similar to a known working config): service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /home/user/tftp/ disable = no cps = 300 2 per_source = 60 } I've done some searching but can't find any parameters for this file to control timeout time or number of retries. The last two arguments (cps, per_source) and completely alien to me (can anyone explain). I have a few possible solutions but the easiest would be to get this TFTP server working. Can anyone help? Either with a timeout configuration or maybe even recommend a different TFTP server? Thanks!

    Read the article

  • CentOS (rel6) with default python 2.6, but seperate 3.3.5 installation

    - by Silvertiger
    I have a CentOS server (rel6) that had python installed (2.6), but I needed a few features in 3.3+. I installed 3.3 into a seperate folder and made a symbolic link to execute it: I installed setup tools: yum install python-setuptools I installed a needed module"pandas" easy_install pandas I executed my pyton script, which encountered an error that required i use a newer version I downloaded and installed Python 3.3.5 to it's own folder so as to not override my default python wget http://www.python.org/ftp/python/3.3.5/Python-3.3.5.tar.xz tar xJf ./Python-3.3.5.tar.xz cd ./Python-3.3.5 ./configure --prefix=/opt/python make make install Made s symbolic link to allow me to execute this new python: ln -s /opt/python3.3/bin/python3.3 ~/bin/py The problem is that when I execute the python script with my new py alias, it does not have all the addons needed (explicitly MySQLdb) which the default install does. How do i go about installing the MySQLdb module, or any for that matter, to be reachable or useable for the new Python 3.3.5 installation? Or is there a way to make the current modules in 2.6 available to 3.3.5 as well?

    Read the article

  • Sony Bravia KDL-32L5000 PC resolution slightly off.

    - by user18818
    Hi, I have a PC running two Nvidia 8500 GTs in SLI mode and I am trying to use my TV in dual mode. When I switch the TV to PC the screen is nearly centered with a slight offset. All resolutions are effected from 800x600 all the way up to the TVs native 1360x768. I have tried with SLI on and off and have PhysX turned off as well as I thought that might have an effect. I am running Windows XP 64-bit SP2 DirectX ver 9.0c Nvidia driver version 181.22 Any other information please let me know. Thanks in advance.

    Read the article

  • Download acceleration with jigdo?

    - by james
    Im using jigdo-lite to download a Debian DVD ISO. I already have the CD version of the image, so I added the CD files to the task. Now I need to download many files (not all) of the DVD ISO. The default jigdo-lite uses wget to download files. It seems jigdo (wget) downloads only one file at a time with one connection. So I'm getting a low download speed. How can I accelerate the download speed using jigdo? Possible Solutions: Using different download manager with jigdo. Is it possible? If yes, How? Using jigdo (wget) to download multiple files at once. How? Getting download links of remaining files to download so that they can be downloaded with a download manager and later added to jigdo iso. How?

    Read the article

  • How can I start nginx via upstart ?

    - by Chiggsy
    Background: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.04 DISTRIB_CODENAME=lucid DISTRIB_DESCRIPTION="Ubuntu 10.04 LTS" I've built nginx, and I'd like to use upstart to start it: nginx upstart script from the site: description "nginx http daemon" start on runlevel 2 stop on runlevel 0 stop on runlevel 1 stop on runlevel 6 console owner exec /usr/sbin/nginx -c /etc/nginx/nginx.conf -g "daemon off;" respawn I get "unknown job" when i try to use initctl to run it, which I just learned apparently means there is an error, ( what's wrong with "Error" to describe errors?) Can someone point me in the right direction ? I've read the documentation , as it is, and it seems kind of sparse for a SysV init replacement... but whatever just need to add this job to the list, run it, and get on with what's left of my life... Any tips? EDIT: initctl version init (upstart 0.6.5)

    Read the article

  • Help: Best way to do a TV-out in 7300GT Nvidia video card?

    - by Martin Ongtangco
    I'm planning to recycle my old PC and build a Media Center using an open-source (C#) software called MediaPortal. My old PC has a GeForce 7300GT with a TV-out plug built-in. When I tested it last night, it wouldn't detect my JVC tv (CRT) using the current drivers. I even purchased a new copper-based TV-Out to RCA cable. I searched all 3 AV channels. The video card has 3 output ports: 2 DVI & 1 s-video. I used the s-video with a S-Video to RCA out cable. I swapped between PAL & NTSC So what I did was I downloaded the first version of an Nvidia driver for 7 series cards, but still even with the old console, it couldn't detect the TV. I'm running out of viable ideas. Anyone here had the same problem and fixed it? Any suggestion is appreciated. Thank you!

    Read the article

  • Synergy Key Mapping

    - by Tauren
    I'm running a Synergy server on Ubuntu and a Synergy+ client on OSX. The server has a standard windows keyboard with shift, ctrl, windows, and alt keys. My MacBookPro has shift, fn, control, alt/option, and command keys. When I press ctrl-c, ctrl-v, etc, the appropriate copy/paste action doesn't happen on the Mac, but it does in Ubuntu. If I'm controlling the mac, and press alt-c, alt-v, then I get the copy/paste action. So I played around with key mapping in synergy.conf and found that the following allows me to do copy/paste with ctrl-c/ctrl-v: section: screens godzilla: mbp.local: ctrl = alt alt = ctrl end Is this all that I need to do? Or are there other mappings that will help as well? The synergy configuration page refers to the following key mappings. What are the equivalent keys for each of these on the Windows keyboard and Mac keyboard? What is a meta or super key? shift = {shift|ctrl|alt|meta|super|none} ctrl = {shift|ctrl|alt|meta|super|none} alt = {shift|ctrl|alt|meta|super|none} meta = {shift|ctrl|alt|meta|super|none} super = {shift|ctrl|alt|meta|super|none} Thanks!

    Read the article

  • Getting error 2048 at whatever I'm doing in Eclipse

    - by Bernhard V
    Hi, whatever I'm doing in Eclipse, I get an error. At start up I get an error at Java tooling initializing. I get an error when I want to open a type. And it's always the same error. For example, when opening a type I get: An internal error occurred during: "Cache refresh". 2048 The error at the start up also prints the error code as 2048. I'm using the most up to date version of Eclipse. Do you know a way to fix this issue?

    Read the article

  • Sending email with exim and extrnal sender address

    - by Tronic
    hi. i have following problem: i want to send emails with an rails webapp. i set up an exim server and when looking into the logs, the sending works, but the emails aren't sent really. i had the same problem with another isp. the sender address is hosted on another mailserver, other isp. i think the problem is, that sending doesn't work because the sener address isn't hosted on the same server. do you have any advice on this? the logs (exim) tell me the following: 2011-01-01 14:38:06 1PZ1eo-0000Ga-38 <= <> R=1PZ1eo-0000GY-1p U=Debian-exim P=local S=1778 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.131] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 Completed [email protected] is the external sender-address! thank you!

    Read the article

  • Intel video driver upgrade now makes my external monitor display red-only with HDMI cable.

    - by Eli
    I have an HP G60 notebook with a Mobile Intel 4 Series Express Chipset video display (Driver version is 8.15.10.2021). OS is Win7 Home Premium. I also have an LG widescreen display that I was connecting to the laptop using an HDMI cable. It was working great, until I applied an Intel 4 Series Express Chipset update from Windows Update. After the update, if I plug the laptop to the monitor using the HDMI cable, it appears I only get the Magenta channel, cause that is all I see. If I connect with the VGA cable, it works fine. So, is it possible it is just the HDMI cable (which IS cheap in this case - fire sale at Blockbuster), and not related to the video driver update at all?

    Read the article

  • Certain Japanese characters aren't displayed properly

    - by Nisto
    On the following site: http://www.nciku.com/search/radical the first 2 characters on the second row of the "Step 2" table aren't displayed properly. All other characters look fine. I tried re-installing the Asian fonts via the checkboxes regarding Asian fonts in the "Regional and Language Options" control panel applet. I have tried removing every single Font from the Fonts folder (some were ofcourse not possible to remove), and re-installing them all again. I did this by... Running cmd Closing down the explorer process In cmd; using the command DEL /F /S /Q * in the Fonts folder Putting in my XP SP3 Retail disc In cmd; using expand -r *.tt_ in the I386 folder on the XP disc (and any other font file, in the I386\LANG folder) I also tried installing this pack from Microsoft, but this solved nothing either. I even tried running my browser (Firefox) through AppLocale. And changing character encoding -- again, does not help. I've also tried viewing the page in Internet Explorer. What could be wrong? I have checked my Fonts folder, to make sure that every single font available on the XP disc is available in WINDOWS\Fonts. What shows in the first square on the second row - I can't really tell what it's supposed to look like (but it's not the proper character)... but the second square shows a rectangular symbol containing HEX code. I've been in this situation before -- and it has been when I've been missing fonts. But how could I possibly be missing a necessary font? Shouldn't it be provided in the Asian "font packages"? I've talked to some other users that has viewed the page, and they had no problems displaying those characters on second row - even though they're only using the fonts provided on the Windows installation disc. Windows XP Professional Service Pack 3 (x86 - with latest updates) Firefox 3.6.15

    Read the article

  • My windows xp wireless hotspot isn't working

    - by Dominic Grenier
    I add the hotspot the regular way. Yet it doesn't show up as available when I try to connect to it using my other Ubuntu laptop. And nothing can connect to it. Yesterday, I successfully made it work for 5 minutes and then it stopped without me changing any configuration. I've already tryed resetting the DNS. Edit: I've updated my Broadcom 802.11b/g driver to a generic but more recent version. I've also repaired the WMI, now the advanced tab of my primary connection is available and the hand meaning the connection is shared appeared. But the computers still connect the wrong way around. (Windows to ubuntu instead of ubuntu to windows) Reinstalled SP3...

    Read the article

  • Finding useful crash-information in Windows 8 Consumer Preview

    - by Lukas Knuth
    I'm currently diving into C# and wanted to play around with the new Metro-styled-applications introduced with Windows 8, so I updated my Windows 7 to Windows 8 Consumer Preview. The problem I'm facing right now is, that the system freezes after 3-5 minutes. It does not take any input from the keyboard or mouse and it does not recover (at least not in less then 10 minutes). Since I have a background in Linux, I'd like to find some information about the cause of the freeze, but I have no idea where to search. I checked the system-logs (under "System Control" - "Management") but they only record that the system was shut down unexpectedly (doe to the face that I held down the power-button to reboot the PC). There is no useful crash-information in there. I don't want to spend hours on randomly reinstalling drivers and doing things that "might help". Isn't there any place I can find some useful information about the freeze? Before you ask: I installed Windows 8 as an updated on my old Windows 7 installation (which worked fine by the way). My hardware fits the minimum requirements (specs can be found here, the MacMini 3,1 model with 2GHz processor). I have updated the graphics-card drivers to the newest Windows 8 drivers from nVidia.

    Read the article

  • Piping powershell messages to Write-EventLog

    - by Richard
    I have a powershell script that runs a custom cmdlet. It is run by Task Scheduler and I want to log what it does. This is my current crude version: Add-PsSnapIn PianolaCmdlets Write-EventLog -LogName "Windows Powershell" -Source "Powershell" -Message "Starting Update-EbuNumbers" -EventId 0 Get-ClubMembers -HasTemporaryEbuNumber -show all | Update-EbuNumbers -Verbose Write-EventLog -LogName "Windows Powershell" -Source "Powershell" -Message "Finished Update-EbuNumbers" -EventId 0 What I would like to do is log the output of my custom cmdlet. Ideally I'd like to create different types of event log entries based on whether it was a warning or a verbose message. Update: I don't want to log the return value of the commandlet. The Update-EbuMembers cmdlet does not return an object. I want to log any verbose messages written by WriteVerbose and I want to log errors created by ThrowTerminatingError.

    Read the article

  • How to write in a <array><dict> structure with defaults write?

    - by Hedge
    I've got a .plist-file with a structure like this: <plist version="1.0"> <array> <dict> <key>BundleIsVersionChecked</key> <false/> <key>BundleIsRelocatable</key> <false/> <key>BundleHasStrictIdentifier</key> <false/> <key>RootRelativeBundlePath</key> <string>value</string> </dict> </array> </plist> I want to add or edit the RootRelativeBundlePath-key with the defaults write command. Another possibility would be writing the whole plist-file but it has to be the same exact structure. How can I do this?

    Read the article

  • Windows 2000 under Windows 7 Virtual PC not working correctly

    - by dave
    I have just moved my Windows 2000 Virtual PCs from Vista to Windows 7 Professional (64-bit). The machines work to a point but I have found some problems: drive mapping does not seem to work any more. I need this to exchange data. I do not need network access to the virtual PC so would rather leave it unconnected. the virtual PC would automatically shutdown the session and go to the login screen after a few minutes of inactivity. I tried installing the Virtual PC Integration Components but the install failed (one of the messages basically says it's XP+ only). Now I'm stuck in 640x480 mode with mouse capture. I have heard that you can install an older version of the Integration Components but this sounds a bit suspect. Does anyone have any ideas on how to get Windows2000 working with drive sharing on a Virtual PC?

    Read the article

  • How to establish SIP connection, when SIP-proxy is required?

    - by LA_
    I have Asterisk/1.8.13.1 Asterisk GUI-version : SVN--r Yes, quite old one, but I can not update it since this is installed on my Synology NAS. NAS is connected to internet thru router Asus RT-N16. I should use the following data to connect to the server: Auth name – 7499952XXXX User name/User ID/Display Name – nickname Authorization user name - [email protected] Domain - sip.beeline.ru SIP proxy server - msk.sip.beeline.ru I've also found the following string: [email protected]:password:[email protected]@msk.sip.beeline.ru:5060/7499952XXXX I've tested the parameters on my PC thru X-Lite and it works well (so, assume there is no any problem with the router, no need to do anything with router's NAS settings). But since I am quite new to Asterisk, I can not understand where to input all these data. Asterisk GUI doesn't have fields for proxy: Can somebody please help me with step-by-step instruction? Thank you in advance!

    Read the article

  • Change the spell-checking language on a PowerPoint presentation

    - by Leonardo
    I received a PowerPoint presentation with dozens of slides, each of them with a number of text boxes. Although the presentation is written in English, the language for spell checking is set to Canadian French. I’m trying to change the language to English, but even if I select all the slides and select a new element on the Language dialog box, the language of the text boxes remain the same. So I have to go slide by slide selecting the text boxes and then changing the language individually. Is there a better way to do this? The version of PowerPoint I have installed is 2002 SP3.

    Read the article

  • XP SP2 Event log not logging events

    - by Weedfreer
    I have a problem whereby a terminal appears not to be logging events correctly and occasionally appears to have problems communicating accross the network.The terminal has previously been infected with a virus which apears to have 'played' with the default group policy in the standard user profile. Although, outwardly, the terminal appears to be working normally I still have a nagging feeling that it isn't quite back to the way it was. It was infected by a user plugging in a USB Stick while the company was using the older version of the AV software...typically a week or so before it was updated.I have configured the Event logs to Overwrite as required and to be 5056KB in Maximum size. I have also attempted:- Disabling the Event Log service & restarting Renewing the EVT files in Windows\system32\config directory Restarting the event log service and restarting Clearing the event log in the Services MMC Resetting the Filters to Default in the services MMC Using the EVENTCREATE command remotely from a CMD window on the server to force an event creation event. So far the only operation to have any sort of success is the remote computer EVENTCREATE command from a CMD window on the server. As it stands, the only other time that the computer has managed to create events is while it is being restarted.Has anyone gotany ideas on how to proceed? I'm thinking that possibly a refresh of the 'Windows\system32\config\SystemProfile' folder. I'm also thinking about running a tool such as Malwarebytes but this could be slightly controvertial as the system needs to be running on 'up-time' for as long as possible. I'm also wonderign whether anyone knows of any Windows admin tools that allow me to control the event logging options or default security options so that i could get it back to some sort of standard.What I'm trying to avoid is a complte re-imaging of the terminal. Although this is an option, I dont really want to have to take it if i dont need to.Many thanks in advance for any suggestions anyone may be able to provide.

    Read the article

  • How can I associate html/htm files with Chrome in Windows 7 64 bit?

    - by matt
    I want Chrome to open all .html files. It is currently set as my default browser, however html files open in IE9. When I go to Control Panel\Programs\Default Programs\Set Associations I see that .html and .htm files are associated with IE. When I choose to change the default program it I'm presented with a list of programs but Chrome is not one of them. I browse to, and then select the Chrome.exe (C:\Users\Matt\AppData\Local\Google\Chrome\Application\chrome.exe) but it goes right back to IE. This is the first time I've seen anything like this. I'm running Windows 7 64 bit. I never had this problem on Windows 7 32 bit. Is this because Chrome by default installs in the User directory, not the Program Files directory? How can I fix these file associations? EDIT: It's not that things are reverting back to IE after associating them with Chrome. When I browse to Chrome in the file association window, and select it, it doesn't seem to take. It doesn't show Chrome in the list of programs despite pointing to the Chrome.exe location. I really think this has something to do with the fact that it doesn't install into the Program File Directory.

    Read the article

  • NAT confusion regarding cisco ASA5510

    - by LonelyLonelyNetworkN00b
    I'm setting up my first cisco firewalls. A little information first:I have two asa5510 setup in a working active/standby pair. From my ISP i have two public subnets. A /29 and a /26. On my DMZ interface i have the /26 configured. On my WAN Interface i have configured the /29 IPs. My isp routes the /26 via the /29 primary IP. I'm running ASA 8.2. I've turned NAT-Control off, because i don't want to use nat for for other than some internal interfaces. In essence i don't want to use NAT unless i specify it. I have a internal interface with the network of 192.168.100.0/24. I've tried setting up nat limke this: nat (inside) 1 192.168.100.0 255.255.255.0 global (WAN) 1 interface I was under the impression that this would let connections that was going from 192.168.100.0/24 and out the WAN interface to be Port-Address-translated. I'm not getting this to work for some reason. Inside interface has security level of 100, and wan has security level of 0.

    Read the article

  • How can I fix my WRT54GL's constant crashing?

    - by Aarthi
    I have a Linksys WRT54GL wireless router (the old blue-and-black) whose underside indicates it is Version 2. I've noticed that, on wireless mode, if I am on a Skype call or in a Google Hangout, the wireless aspect will crash completely. In addition, if I am connected via an ethernet cord, my quality (that is, how my voice is received) tanks very quickly. I suspect this is due, in part, to my internet connectivity itself (I'm on Comcast instead of Verizon FiOS, as I'd prefer) but I'd like to stop my wireless router's wireless capability from crashing. I considered a firmware upgrade, but it looks to me as if I am upgraded. Short of manually running ethernet all over my house, I'm not sure what to do. How can I solve my wireless router's issues? If the answer is "buy a new router," then that's valid, as well, in my opinion.

    Read the article

  • How to convert .flv file to .3gp using ffmpeg?

    - by Chetana
    I have converted any video format to 3gp file format using ffmpeg on one server. But on another server it not works. Following is my script: exec("ffmpeg -i test.flv -sameq -acodec libmp3lame -ar 22050 -ab 96000 -deinterlace -nr 500 -s 320x240 -aspect 4:3 -r 20 -g 500 -me_range 20 -b 270k -deinterlace -f flv -y test.3gp "); Can anyone tell me what is wrong in script? Following is my ffmpeg setting: root@ninja [~]# ffmpeg -formats ffmpeg version CVS, build 3277056, Copyright (c) 2000-2004 Fabrice Bellard configuration: --enable-mp3lame --enable-libogg --enable-gpl --disable-mmx --enable-shared built on Jun 17 2009 10:51:43, gcc: 4.1.2 20080704 (Red Hat 4.1.2-44)

    Read the article

  • How to determine the Kerberos realm from an LDAP directory?

    - by tstm
    I have two Kerberos realms I can authenticate against. One of them I can control, and the other one is external from my point of view. I also have an internal user database in LDAP. Let's say the realms are INTERNAL.COM and EXTERNAL.COM. In ldap I have user entries like this: 1054 uid=testuser,ou=People,dc=tml,dc=hut,dc=fi shadowFlag: 0 shadowMin: -1 loginShell: /bin/bash shadowInactive: -1 displayName: User Test objectClass: top objectClass: account objectClass: posixAccount objectClass: shadowAccount objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson uidNumber: 1059 shadowWarning: 14 uid: testuser shadowMax: 99999 gidNumber: 1024 gecos: User Test sn: Test homeDirectory: /home/testuser mail: [email protected] givenName: User shadowLastChange: 15504 shadowExpire: 15522 cn: User.Test userPassword: {SASL}[email protected] What I would like to do, somehow, is to specify per-user basis to which authentication server / realm the user is authenticated against. Configuring kerberos to handle multiple realms is easy. But how to I configure other instances, like PAM, to handle the fact that some users are from INTERNAL.COM and some from EXTERNAL.COM? There needs to be an LDAP lookup of some kind where the realm and the authentication name is fetched from, and then the actual authentication itself. Is there a standardized way to add this information to LDAP, or look it up? Are there some other workarounds for a multi-realm user base? I might be ok with a single realm solution, too, as long as I can specify the user name - realm -combination for the user separately.

    Read the article

  • What is needed to invoke LibreOffice running just the macro without the GUI?

    - by C.W.Holeman II
    Invoking LibreOffice and running a macro via the GUI works as expected producing three HTML files, one for each spreadsheet page: $ libreoffice x.ods Tools>Macros>Run Macros... Library: LibreOffice Macros> ExportSheetsToHTML Macro Names: exportsheetstohtml.js Run When attempting to invoke just the macro it just hangs: $ libreoffice\ -invisible\ -nofirststartwizard\ -headless\ -norestore\ x.ods "macro:///LibreOffice Macros.ExportSheetsToHTML.exportsheetstohtml.js" $ ps x | grep libreoffice 11286 pts/0 S+ 0:00 /bin/sh /opt/libreoffice/program/soffice -invisible -nofirststartwizard -headless -norestore x.ods macro:///LibreOffice Macros.ExportSheetsToHTML.exportsheetstohtml.js 11296 pts/0 Sl+ 0:58 /opt/libreoffice/program/soffice.bin -invisible -nofirststartwizard -headless -norestore x.ods macro:///LibreOffice Macros.ExportSheetsToHTML.exportsheetstohtml.js Version info: Linux road 2.6.32-28-generic #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 i686 GNU/Linux LibreOffice 3.3.0 OOO330m19 (Build:6) tag libreoffice-3.3.0.4

    Read the article

< Previous Page | 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260  | Next Page >