Search Results

Search found 32865 results on 1315 pages for 'found'.

Page 127/1315 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• Ubuntu 12.04 Fails to Boot after Reboot

  - by Joe

  I have installed Ubuntu 12.04 on several Dell c6220 servers. The install was successful and all hardware is recognized. The problem that I am running into is that when issuing the reboot command or when pressing ctrl-alt-del, the server shuts down, but never comes back up. Instead, the fan revs up to full speed and stays that way until I power the server down. Once the server has been powered down via the power button, Ubuntu will boot just fine -- until the next reboot. I have found that by rebooting the server via the DRAC web interface will reboot the server correctly. I have also found that this problem does not exist with CentOS -- I can press ctrl-alt-del all day long and it always comes back up. I've tried several kernel parameters such as: reboot=bios reboot=pci reboot=acpi reboot=cold acpi=off noapic Nothing seems to work. I have also tried upgrading to kernel 3.4, but no change there, either. Has anyone run into a similar problem or any pointers on troubleshooting? Thanks, Joe

  Read the article

• What is the simplest way to render video into memory (for drawing to a texture) in .NET?

  - by sebf

  In my project I would like to be able to play back video on surfaces in the world. I intend to do this by having the video frames rendered to a block of memory, then use this to update a texture each frame. Everything is in place - except for the part that actually gets the video. I have looked on Google and found that the video library world is very expansive (and geared towards video processing), and am having trouble finding a suitable one. FFMpeg is very comprehensive, but is an entire suite and would take a good amount of work to integrate. So far the most promising library I've found is the one based on the VLC player libraries - by virtue of it using the same resources as VLC Player it is known to be very capable; it also renders to blocks of memory, but the API (at least of the one on Codeplex) is more of a port of the C++ API rather than a managed wrapper. The 'solution' can be any wrapper/API/library, but with characteristics that make it suitable for use in a rendering engine, namely: Renders the video frame data to memory, so it can be picked up and passed to a texture on the GPU easily. Super simple - all that is needed is a way to load, jump and render a frame programatically - ideally it would use the systems codecs and not require an assortment of plugins. Permissive license (LGPL or more free-er) .NET bindings at least; all the better if it is natively managed Can anyone suggest a lightweight, (.NET) library, that can take a video file, and spit out some frames into a byte[]?

  Read the article

• Is there an idiot's guide to software licensing somewhere?

  - by Karpie

  Basically, my knowledge on the issue is zilch other than the fact that open-source and closed-source exists. I'm a web developer (not a designer in the slightest), so I look online for things like icons. I've always been a big fan of these icons, which have a Creative Commons Attribution 2.5 License. As far as I can see, this license says 'do whatever you want with them as long as you have a link back to me somewhere'. Is that assumption correct? Just today I found a new icon set, with a much more confusing license (found here), and to be quite honest I have no idea if I'm allowed to use them or not. At the moment I want to just use them for toy stuff that might never see the light of day, but then my source code is stored on Github, is it legal to store the icons there where they're publicly accessible? If I put them on my personal website that might have ads on it to make me five cents every now and then, is that legal? If I use them on a site that offers a free service to users, is that legal? If that site then starts making money (via things like paid subscriptions) or gets bought out by someone (highly unlikely but one day possible) is that legal? Is there some noob guide out there that explains all this stuff, because I would hate to start using this sort of stuff now only to have to change it all later. Even if I buy the icons, there's still licensing issues that I don't understand! :( And this sort of stuff keeps popping up more and more often...

  Read the article

• BizTalk 2009 - How do I do t"HAT"?

  - by StuartBrierley

  In my previous life working with BizTalk Server 2004, I came to view HAT (the Health and Activity Tracking tool) as one of my first ports of call in the case of problems with any of our BizTalk solutions.  When you move to BizTalk Server 2009 it is quickly apparent that HAT is no longer with us. HAT was useful in BizTalk 2004 mainly as it provided developers and administrators with a number of useful queries and views of what was going on inside BizTalk at runtime; when and what type of messages were received and sent, what messages had been suspended, what orchestration were running or suspended, you could even follow the process flow of a message or orchestration to see what was going on. With BizTalk Server 2009 much of the functionality of HAT can now be found in the BizTalk Administration console.  Select a BizTalk Group and you will be shown the Group Hub Overview page.  This provides a number of default queries that replicate some of those found in the old HAT. You can also use the Group Hub page to create new queries.  These can then be saved and loaded in other Group Hub instances - useful for creating queries in development for later use in Test, Psuedo-Live and Live environments. In the next few posts I am going to look at some of the common queries that we might miss from HAT and recreate them (or something close) using the new query option. Messages - last 100 received Messages - last 100 sent Messages - last 50 suspended Service instances - last 100 I have yet to try the updated Admin-HAT-Console in anger, and after using old-HAT for so long it may take some getting uesd to, but so far I would say that moving the HAT functionality into the BizTalk Administration console was probably the correct way to go.  Having one tool as the place to look for the combined functionality on offer certainly seems to be the sensible option.

  Read the article

• Plugged in, not charging&ndash;Windows 7

  - by Kelly Jones

  Just a quick post on something I ran into lately with my Dell Precision M4500 laptop (monster laptop!).  I noticed the little icon in the system tray for the power options was stating that it was “plugged in, not charging”.  I don’t know why it was stating this, but I quickly found a fix for it on the net. I found the fix in this forum on CNET.  Here’s the fix: In order to correct problems with the battery's power management software, follow the steps below. 1. Click Start and type device in the search field, then select Device Manager . 2. Expand the Batteries category. 3. Under the Batteries category, right-click the Microsoft ACPI Compliant Control Method Battery listing, and select Uninstall . WARNING: Do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver. 4. On the Device Manager taskbar, click Scan for hardware changes . Alternately, select Action > Scan for hardware changes . Windows will scan your computer for hardware that doesn't have drivers installed, and will install the drivers needed to manage your battery's power. The notebook should now indicate that the battery is charging.   And it did work.

  Read the article

• How do you make slides for programming talks?

  - by Yuvi Masory

  I've given a few talks recently and I have not found a good way to make slides. Here are a few desirable characteristics for programming slides: They're slides. A standard emacs buffer won't do it. They have syntax highlighting for code. They support basic formatting, like font size and color and bullets. No fancy animations needed. The only animation I desire is one-by-one appearance of bullets. So far I have considered: Microsoft Office - out of the question for Linux users. OpenOffice.org - too much for my needs, code formatting/highlighting needs to be done externally and pasted in. On the plus side supports bullets, bullet-by-bullet animation, and font formatting. Emacs - Supports all the code formatting but I haven't found a slides mode that lets me transition from one chunk to another. HTML5 - I once made slides using html5rocks as a template. It supports everything, but is too hard and time-consuming the "throw together" a few slides before a minor talk. Also the html5-only features may not work on the podium computer's installed browser. Any suggestions for programs/techniques for making code-centric presentations?

  Read the article

• MySQL Workbench 5.2.43 GA released

  - by Alfredo Kojima

  The MySQL developer tools team announces the availability of version 5.2.43 of the MySQL Workbench GUI tool. This version contains various fixes and minor enhancements and includes 53 resolved bugs. With this version, Fedora 15 packages are replaced with Fedora 17. Also, Gatekeeper in Mac OS X Mountain Lion is now properly handled. For a full list of issues fixed in this release, see http://dev.mysql.com/doc/workbench/en/changes-5.2.x.html Please get your copy from our Downloads site. In Windows, you can also use the MySQL Windows Installer to update Workbench. Sources and binary packages are available for several platforms, including Windows, Mac OS X and Linux. http://dev.mysql.com/downloads/workbench/ Workbench Documentation can be found here. http://dev.mysql.com/doc/workbench/en/index.html Utilities Documentation can be found here. http://dev.mysql.com/doc/workbench/en/mysql-utilities.html If you need any additional info or help please get in touch with us. Post in our forums or leave comments on our blog pages. - The MySQL Workbench Team

  Read the article

• What are some good tips for a developer trying to design a scalable MySQL database?

  - by CFL_Jeff

  As the question states, I am a developer, not a DBA. I have experience with designing good ER schemas and am fairly knowledgeable about normalization and good schema design. I have also worked with data warehouses that use dimensional modeling with fact tables and dim tables. However, all of the database-driven applications I've developed at previous jobs have been internal applications on the company's intranet, never receiving "real-world traffic". Furthermore, at previous jobs, I have always had a DBA or someone who knew much more than me about these things. At this new job I just started, I've been asked to develop a public-facing application with a MySQL backend and the data stored by this application is expected to grow very rapidly. Oh, and we don't have a DBA. Well, I guess I am the DBA. ;) As far as designing a database to be scalable, I don't even know where to start. Does anyone have any good tips or know of any good educational materials for a developer who has been sort of shoved into a DBA/database designer role and has been tasked with designing a scalable database to support an application like this? Have any other developers been through this sort of thing? What did you do to quickly become good at this role? I've found some good slides on the subject here but it's hard to glean details from slides. Wish I could've attended that guy's talk. I also found a good blog entry called 5 Ways to Boost MySQL Scalability which had some good information, though some of it was over my head. tl;dr I just want to make sure the database doesn't have to be completely redesigned when it scales up, and I'm looking for tips to get it right the first time. The answer I'm looking for is a "list of things every developer should know about making a scalable MySQL database so your application doesn't perform like crap when the data gets huge".

  Read the article

• How do I connect to a wireless network?

  - by Keith Groben

  I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

  Read the article

• Proper caching method with .htaccess

  - by mark075

  There are a lot of snippets that enable caching on a website and I don't know which one should I use. The most popular is something like this: <IfModule mod_expires.c> ExpiresActive On ExpiresByType image/jpg "access 1 year" ExpiresByType image/png "access 1 year" ExpiresByType text/css "access 1 month" ExpiresDefault "access 2 days" </IfModule> I also found something similar, but with keyword 'plus'. Like this: ExpiresByType image/png "access plus 2592000 seconds" What does it mean, because I didn't find anything in the documentation. Another snippet I found: <ifModule mod_headers.c> <filesMatch "\.(ico|jpe?g|png|gif|swf)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\.(css)$"> Header set Cache-Control "max-age=604800, public" </filesMatch> <filesMatch "\.(js)$"> Header set Cache-Control "max-age=216000, private" </filesMatch> <filesMatch "\.(x?html?|php)$"> Header set Cache-Control "max-age=600, private, must-revalidate" </filesMatch> </ifModule> What is the best practice?

  Read the article

• Is there a way how to customize my keyboard layout in Xubuntu in a graphical way (by clicking)?

  - by Honza Javorek

  Possible duplicate, but I really couldn't find a solution. I would like to adjust my US keyboard layout, e.g. to add possibility to type some special characters on combination of right Alt + another character, etc. Moreover, my arrow up is dead, so until I buy another keyboard, I'd like to use my right shift as my arrow up, ASAP. However, there seems to be no way how to edit my keyboard layout easily in Xubuntu :( I found no editor and I really don't want to spend years in some configuration files and terminal (not that I can't, but I really really don't want). KLE - the only editor I could find, but no installation guide, no package, no PPA, no idea how to make it working (and uninstallable if not needed one day) Editor in Ubuntu - apparently not present in Xubuntu I found several tutorials how to change the layout, but they all seems to be complicated and not easy to follow. I don't want to spend a weekend in terminal or so, I am looking for an app to launch, make some clicking, finish my work by hitting Save button and - done! Please, is there such solution? For humans?

  Read the article

• TechEd 2012: MVVM In XAML

  - by Tim Murphy

  Paul Sheriff was a real character at the start of his MVVM in XAML session.  There was a lot of sarcasm and self deprecation going on prior to the .  That is never a bad way to get things rolling right after lunch.  Then things got semi-serious. The presentation itself had a number of surprises, but not all of them had to do with XAML.  When he flipped over his company’s code generation tool it took me off guard.  I am used to generator that create code for a whole project, but his tools were able to create different types of constructs on demand.  It also made it easier to follow what he was doing than some of the other demos I have seen this week where people were using code snippets. Getting to the heart of the topic I found myself thinking that I may have found my utopia for application development in MVVM.  Yes, I know there is no such thing, but this comes closer than any other pattern I have learned about.  This pattern allows the application to have better separation of concerns than I have seen before.  This is especially true since you can leverage data binding.  I’m not sure why it has taken me so long to find time for this subject. As Paul demonstrated using this pattern with XAML gives you multi-platform reusable code when you leverage common utility classes and ModelView classes.  The one drawback I see is that you have to go to the lowest common denominator between the platforms you want to support, but you always have to weigh the trade offs. And finally, the Visual Studio nuggets just keep coming.  Even though it has been available for several generations of Visual Studio I have never seen someone use linked files within a solution.  It just goes to show that I should spend more time exploring the deeper features of each dialog. del.icio.us Tags: TechEd,TechEd 2012,MVVM,Paul Sheriff,Patterns,Visual Studio 2012

  Read the article

• Is there supposed to be a Windows Network folder in the file manager?

  - by Cindy

  I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? Original question First of all I just want to say, I wish I had tried Ubuntu a couple years ago when I first heard about it, but I was like a lot of the population and went with the "easy way" and stuck with Windows because I didn't want to take the time to learn something new. Well, about 3 months ago I realized someone had hacked into my computer, and then found they had hacked my facebook account so I decided I had better do a complete credit check. I found student loans (totalling about 30,000 so far) had recently showed up on my credit report. I think it's going to be a long, long road to recovery now but I'm hoping Ubuntu will be a start and definitely an eye opener. My relationship with Windows is over. I had 3 antivirus programs running, none were protecting me like I thought they were. Turned out a free program that I downloaded was the only one that could detect and clean the virus, but by then it was too late. Anyhow, my question is, I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? I am using a local ISP (and won't be much longer because I am very paranoid at this point) and I want to make sure all is ok before I put my new hard drive in and install Ubuntu. Any help would be appreciated. Also, I want to thank Ubuntu and the community for giving people an alternative.

  Read the article

• More NASM with GVim

  - by MarkPearl

  Today I am bashing around with nasm again… some useful things I found… Set the current working directory of gvim to the current file path I have found setting the current working directory of gvim to the file location is very useful, especially if you are wanting to use commands in gvim to run your compiled code. It can be done by typing in the following in the command mode in gvim… cd %:p:h Once you have set it, you can use the ! to run commands you would normally run in the dos shell.. e.g. !dir Compiling code to make an executable There are three thing you need to specify to compile a basic file in name, they are… The output file format The output file name The source file name An example of this would be the following (where you have a file called temp.asm which is the source file) nasm –f bin temp.asm –o temp.com Output file format The –f specifies the output file format (in this case a binary file). To get a list of the available output file formats you can type nasm –hf (for my installation bin is the default, in which case I can omit it) Output file name This is just the name you want the compiled file to be called. For windows machines I specify .com as my default format.

  Read the article

• My home partition slowly fills up until the system is unable to complete even simple tasks

  - by user973810

  So I have an awesome configuration on my home pc. My /home directory has its own partition. My home partition slowly fills up until the system is unable to complete even simple tasks. For example, when this issue has occured, I can load up firefox. It just pops up an error message saying that it cannot be done. Rebooting solves the issue. The strange thing is, I've run baobab and it doesn't notice a problem. There should be hundreds of gigabytes of data somewhere, but it doesn't see it. Does anyone have any idea of how I might troubleshoot this issue? I'm thinking I could do lsof but I've always found the output of that to be too much information. Maybe my drive is, like, dying. Edit: is there a /home analog of /var that gets cleared out at boot time? Maybe I could check in there next time I notice this problem to see if I can divine what's up. Update: I found the issue. my .xsession-errors file is filling up with Authentication deferred - ignoring client message Is there a way I can see what is causing this error and fix it?

  Read the article

• How can I test linkable/executable files that require re-hosting or retargeting?

  - by hagubear

  Due to data protection, I cannot discuss fine details of the work itself so apologies PROBLEM CASE Sometimes my software projects require merging/integration with third party (customer or other suppliers) software. these software are often in linkable executables or object code (requires that my source code is retargeted and linked with it). When I get the executables or object code, I cannot validate its operation fully without integrating it with my system. My initial idea is that executables are not meant to be unit tested, they are meant to be linkable with other system, but what is the guarantee that post-linkage and integration behaviour will be okay? There is also no sufficient documentation available (from the customer) to indicate how to go about integrating the executables or object files. I know this is philosophical question, but apparently not enough research could be found at this moment to conclude to a solution. I was hoping that people could help me go to the right direction by suggesting approaches. To start, I have found out that Avionics OEM software is often rehosted and retargeted by third parties e.g. simulator makers. I wonder how they test them. Surely, the source code will not be supplied due to IPR rgulations. UPDATE I have received reasonable and very useful suggestions regarding this area. My current struggle has shifted into testing 3rd party OBJECT code that needs to be linked with my own source code (retargeted) on my host machine. How can I even test object code? Surely, I need to link them first to even think about doing anything. Is it the post-link behaviour that needs to be determined and scripted (using perl,Tcl, etc.) so that inputs and outputs could be verified? No clue!! :( thanks,

  Read the article

• Working with Google Webmaster Tools

  - by com

  My first question is about Crawl errors in Google Webmaster Tools. Crawl errors is devided into few sections. One of them is HTTP. I assume that all broken links in HTTP was somehow found by crawler, this is not the links from sitemap. If this was found by scanning all sitemap pages for links, why it doesn't mention what was the source page, like in sitemap section with column Linked From. And what the meaning of Linked From, I thought if the name of section is sitemap, therefore all URLs should be taken from sitemap, so why there is Linked From? The second question, what is the best way to trreat searching on the site. How come the searching result page are getting indexed? Because of the fact that all searching result page are getting indexed, I have to many page in Linked From. What's the right practice? Question three: In order to improve response time in WMT, can I redirect all crawler's requests to designated free web server? Is this good practice? Question four: How should I treat Google Analytics Code (with parameters PageView, PageLoadTime), in the case user request non existing page, should I render Google code or not? Right now I use Google Analytics Code on the common template page, such that every page, also non existing page with error message contains Google Analytics Code, it seems like it has influence on WMT.

  Read the article

• MS Marketing Strategy

  - by Aaron Kowall

  I found this week’s Windows Phone 8 event interesting.  Not just because it looks like some fantastic new features in the new OS but because of the wait for release.  If I were a Nokia shareholder (which I am not) I’d be very unhappy with MS announcing that Windows Phone 8 will NOT work with current hardware.  So, there are some very nice Lumia devices that are now end-of-life that have arrived relatively recently at carriers and retailers. I understand that MS needs to demonstrate progress against iOS and Android and that there is some Windows 8 tie-in that they are trying to capitalize (and MS IS still all about Windows).  However, it’s a bit of a kick to partners that have invested in the platform with pretty decent devices (Samsung, HTC and of course Nokia). Personally, I’m still using a Samsung Foucs.  I was seriously considering upgrading to a Lumia 900 (we just got Lync mobile available) but will now wait it out until new devices arrive with Windows 8.  If MS had waited to announce, I would happily have upgraded to the Lumia and when I found out it couldn’t be upgraded then that would be a gamble I took and lost and I’d live with it.  Now, however, I can see the future and know that waiting is the better option for me so that is 1 sale Nokia will miss out on.  Based on some chats I’ve seen on mobile forums I’m certainly far from the only one. I’m sure glad I’m not in charge of marketing at MS.  There are tough decisions to be made there and I’m pretty sure you piss somebody off regardless. Technorati Tags: WP8,Lumia,Nokia,Samsung

  Read the article

• I don't understand how TDD helps me get a good design if I need a design to start testing it

  - by Michael Stum

  I'm trying to wrap my head around TDD, specifically the development part. I've looked at some books, but the ones I found mainly tackle the testing part - the History of NUnit, why testing is good, Red/Green/Refactor and how to create a String Calculator. Good stuff, but that's "just" Unit Testing, not TDD. Specifically, I don't understand how TDD helps me get a good design if I need a Design to start testing it. To illustrate, imagine these 3 requirements: A catalog needs to have a list of products The catalog should remember which products a user viewed Users should be able to search for a product At this points, many books pull a magic rabbit out of a hat and just dive into "Testing the ProductService", but they don't explain how they came to the conclusion that there is a ProductService in the first place. That is the "Development" part in TDD that I'm trying to understand. There needs to be an existing design, but stuff outside of entity-services (that is: There is a Product, so there should be a ProductService) is nowhere to be found (e.g., the second requirement requires me to have some concept of a User, but where would I put the functionality to remind? And is Search a feature of the ProductService or a separate SearchService? How would I know which I should choose?) According to SOLID, I would need a UserService, but if I design a system without TDD, I might end up with a whole bunch of Single-Method Services. Isn't TDD intended to make me discover my design in the first place? I'm a .net developer, but Java resources would also work. I feel that there doesn't seem to be a real sample application or book that deals with a real line of business application. Can someone provide a clear example that illustrates the process of creating a design using TDD?

  Read the article

• Anyone can suggest some Game Frameworks for GNU/Linux? [closed]

  - by dysoco

  So I've been developing a little bit with XNA + C# in Windows, not really much: just some 2D stuff, but I've found that XNA is a really good framework. I'm a GNU/Linux user, and I'm definitely migrating my desktop to Gentoo Linux (I've been using Arch in my laptop for a while now). But, of course, I need a C# + XNA alternative... I'm not really an expert in any language, so I can really pick up anything (except, maybe, Functional ones), I prefer C-Like languages like Java or Ruby, I tried Python but found the Whitespace syntax confusing. I would like to hear some of you'r suggestions, I'm not asking for "the best", but for "some suggestions", so I think this is objective enough. Probably you're going to suggest C++ + SDL, but I would prefer something more "High Level" like XNA, but I'm open to discuss anything. So... any ideas ? Note: I think this questions meets the guidelines for this site, if it doesn't: please not only downvote this question, but comment on what can I do to improve it. Thanks. PS: 2D Games, not 3D

  Read the article

• Dom U Installation on Ubuntu 11.10

  - by sridutt

  I am trying to add a DomU Operating system on Ubuntu 11.10. I have successfully installed Xen. Verified with xm info virsh-version which returns: Compiled against library: libvir 0.9.2 Using library: libvir 0.9.2 Using API: Xen 3.0.1 Running hypervisor: Xen 4.1. Now when I tried to install Dom0 it said: unable to connect to 'localhost:8000': , in VMM. So, I followed this bug link. I could now start adding DomU. When adding DomU, in last stage, it gives the following error: Unable to complete install: 'POST operation failed: xend_post: error from xen daemon: (xend.err "Error creating domain: device model '/usr/lib/xen/bin/qemu-dm' not found")' Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 44, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/create.py", line 1899, in do_install guest.start_install(False, meter=meter) File "/usr/lib/pymodules/python2.7/virtinst/Guest.py", line 1223, in start_install noboot) File "/usr/lib/pymodules/python2.7/virtinst/Guest.py", line 1291, in _create_guest dom = self.conn.createLinux(start_xml or final_xml, 0) File "/usr/lib/python2.7/dist-packages/libvirt.py", line 1686, in createLinux if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self) libvirtError: POST operation failed: xend_post: error from xen daemon: (xend.err "Error creating domain: device model '/usr/lib/xen/bin/qemu-dm' not found") I tried following this bug link that said, the bug is solved in the below package. When I run ./configure in this, I am getting an error: checking for LIBXML... no checking libxml2 xml2-config >= 2.6.0 ... configure: error: Could not find libxml2 anywhere (see config.log for details). What is the problem?

  Read the article

• Motivation for service layer (instead of just copying dlls)?

  - by BornToCode

  I'm creating an application which has 2 different UIs so I'm making it with a service layer which I understood is appropriate for such case. However I found myself just creating web methods for every single method I have in the BL layer, so the services basically built from methods that looks like this: return customers_bl.Get_Customer_Prices(customer_id); I understood that a main point of the service layer is to prevent duplication of code so I asked myself - well, why not just import the BL.dll (and the DAL.dll) to the other UI, and whenever making a change re-copy the dll files, it might not be so 'neat', but is the all purpose of the service layer to prevent this? {I know something is wrong in my approach, I'm probably missing the importance of service layer, I'd like to get more motivation to create another layer, especially because as it is I found that many of my BL functions ALREADY looks like: return customers_dal.Get_Customer_Prices(cust_id) which led me to ask: was it really necessary to create the BL just because on several functions I actually have LOGIC inside the BL?} so I'm looking for more motivation to creating ONE MORE layer, I'm sure it's not just to make it more convenient that I won't have to re-copy the dlls on changes? Am I grasping it wrong? Any simple guidelines on how to design service layer (corresponding to all the BL layer functions or not? any simple example?) any enlightenment on the subject?

  Read the article

• Motivation for a service layer (instead of just copying dlls)?

  - by BornToCode

  I'm creating an application which has 2 different UIs so I'm making it with a service layer which I understood is appropriate for such scenario. However I found myself just creating web methods for every single method I have in the BL layer, so the services basically built from methods that looks like this: return customers_bl.Get_Customer_Prices(customer_id); I understood that a main point of the service layer is to prevent duplication of code so I asked myself - why not just import the BL.DLL (and the dal.dll) to the other UI, and whenever making a change re-copy the dlls, it might not be so 'neat', but still less hassle than one more layer? {I know something is wrong in my approach, I'm probably missing the importance of service layer, I'd like to get more motivation to create another layer, especially because as it is I found that many of my BL functions ALREADY looks like: return customers_dal.Get_Customer_Prices(cust_id) which led me to ask: was it really necessary to create the BL just because on several functions I actually have LOGIC inside the BL?} so I'm looking for more motivation to creating ONE MORE layer, I'm sure it's not just to make it more convenient that I won't have to re-copy the dlls on changes? Am I grasping it wrong? Any simple guidelines on how to design service layer (corresponding to all the BL layer functions or not? any simple example?) any enlightenment on the subject?

  Read the article

• Fresh Ubuntu 12.10 install no desktop or wing bar

  - by Travis

  After a fresh installm of ubuntu 12.10 (complete erase) after logging in it appears i have no taskbar or much of anything, although i can still execute my terminal with CTRL+ALT+T. i looked around a little, seems i'm not the only person who has had this problem. I found here: http://ubuntuforums.org/showthread.php?p=12303179#post12303179 From there, i found myself here: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-updates/+bug/1068341 I followed precisely the instructions provided which were: this problem is solved this way Switch to a terminal (Ctrl-Alt-F1). Login as your username. Install linux source (sudo apt-get install linux-source) and headers (sudo apt-get install linux-headers-3.5.0-17-generic). Uninstall nvidia driver - this depends on which version you installed (sudo apt-get remove nvidia-current or sudo apt-get remove nvidia-current-updates or sudo apt-get remove nvidia-experimental-304). Reinstall nvidia driver (sudo apt-get install nvidia-current-updates). If it successfully installs, restart the computer (sudo shutdown -r now). Source Desktop does not show when I installed nvidia drivers! I have rebooted, and i am still having the exact same problem. so i back at square one. can someone help me please? this is my room mates computer and i told him i was "fixing" it and now i feel like i've ruined it. Any help is greatly appreciated. Thank you for your time.

  Read the article

• How can I connect my USB (HP) printer in 10.4, which can't be discovered and worked in 9.x

  - by Brian

  My printer was working under 9.x. It is a an hp photosmart C3100 series. When I open the Admin- printing. no local printers are found. I try to add via other (My local choices are Serial and other). I have tried many uri's - ipp://localhost:631/ipp, http://localhost/ipp, localhost, 127.0.0.1, etc... None have worked. Under the networked I have tried JetDirect, using localhost and 127.0.0.1 and port 631. I have tried many options under IPP with different variants in the host trying to verify a printer. No luck. I tried LPD/LPR with localhost and tried the probe. no luck. I tried the cups admin via localhost:631 and that didn't work. On the old version its simply found the local printer, I might have picked the driver, I can't remember but it was the photosmart c3100 series that was working. I just can't get 10.4 to print.

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >