Search Results

Search found 8410 results on 337 pages for 'hardware reserved'.

Page 127/337 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

  • Handling bugs, quirks, or annoyances in vendor-supplied headers

    - by supercat
    If the header file supplied by a vendor of something with whom one's code must interact is deficient in some way, in what cases is it better to: Work around the header's deficiencies in the main code Copy the header file to the local project and fix it Fix the header file in the spot where it's stored as a vendor-supplied tool Fix the header file in the central spot, but also make a local copy and try to always have the two match Do something else As an example, the header file supplied by ST Micro for the STM320LF series contains the lines: typedef struct { __IO uint32_t MODER; __IO uint16_t OTYPER; uint16_t RESERVED0; .... __IO uint16_t BSRRL; /* BSRR register is split to 2 * 16-bit fields BSRRL */ __IO uint16_t BSRRH; /* BSRR register is split to 2 * 16-bit fields BSRRH */ .... } GPIO_TypeDef; In the hardware, and in the hardware documentation, BSRR is described as a single 32-bit register. About 98% of the time one wants to write to BSRR, one will only be interested in writing the upper half or the lower half; it is thus convenient to be able to use BSSRH and BSSRL as a means of writing half the register. On the other hand, there are occasions when it is necessary that the entire 32-bit register be written as a single atomic operation. The "optimal" way to write it (setting aside white-spacing issues) would be: typedef struct { __IO uint32_t MODER; __IO uint16_t OTYPER; uint16_t RESERVED0; .... union // Allow BSRR access as 32-bit register or two 16-bit registers { __IO uint32_t BSRR; // 32-bit BSSR register as a whole struct { __IO uint16_t BSRRL, BSRRH; };// Two 16-bit parts }; .... } GPIO_TypeDef; If the struct were defined that way, code could use BSRR when necessary to write all 32 bits, or BSRRH/BSRRL when writing 16 bits. Given that the header isn't that way, would better practice be to use the header as-is, but apply an icky typecast in the main code writing what would be idiomatically written as thePort->BSRR = 0x12345678; as *((uint32_t)&(thePort->BSSRH)) = 0x12345678;, or would be be better to use a patched header file? If the latter, where should the patched file me stored and how should it be managed?

    Read the article

  • Power Management with Oracle VM Server for SPARC

    - by Honglin Su
    With the introduction of Oracle VM Server for SPARC 2.2, it includes power management features which can be set via the service processor (ILOM) of the supported SPARC T-Series systems. Watch this video to learn about the hardware power savings capabilities available on SPARC T4 systems, and how Oracle VM Server for SPARC makes use of them. The video will show you how to choose a power management policy and set a power cap. For more information, read the OTN technical article "How to Use the Power Management Controls on SPARC Servers".

    Read the article

  • The Perfect Desktop - Ubuntu Studio 10.04

    <b>Howtoforge:</b> "This tutorial shows how you can set up an Ubuntu Studio 10.04 desktop that is a full-fledged replacement for a Windows desktop, i.e. that has all the software that people need to do the things they do on their Windows desktops. The advantages are clear: you get a secure system without DRM restrictions that works even on old hardware, and the best thing is: all software comes free of charge."

    Read the article

  • I can't change audio/volume preferences?

    - by genesis
    When I click to sound icon on the panel, I have 3 options: "Mute all" is gray and could not be clicked Slider - I can slide but it DOESNT change anything Preferences - Shows this (waiting for the response from audio device), but it doesn't show anything for more than a hour This is from aplay -l : root@fb:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog] Subdevices: 1/1 Subdevices #0: subdevice #0 karta 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI] Subdevices: 1/1 Subdevices #0: subdevice #0 root@fb:~# What's wrong?

    Read the article

  • How to see the discharge rate of the battery

    - by Luis Alvarado - The Wolverine
    Maybe this question was made earlier but I can't find it. I want to see a terminal command or gui program that can show me the discharge rate of the battery. What hardware parts or programs are using more watts. EDIT: Found additional information regarding my question when using for example PowerTop: https://bbs.archlinux.org/viewtopic.php?id=128319 https://bugs.archlinux.org/task/26416 Both related to the having disable ACPI_PROCFS_POWER in the kernel.

    Read the article

  • Partner Up for FY13: LIVE Oracle PartnerNetwork Kickoff is June 26-27

    - by oracletechnet
    Work for an Oracle partner? Then this is appointment viewing: On June 26-27, in different time zones worldwide, Oracle PartnerNetwork is live-streaming its FY13 Partner Kickoff. SVP Alliance & Channels Judson Althoff will join other technical executives, including Thomas Kurian (EVP Software Development) and John Fowler (EVP Hardware & Systems), to discuss the full range of business opportunities now available to Oracle partners. Register for your regional Webcast today. 

    Read the article

  • Webcast: Redefining the CRM and E-Commerce Experience with Oracle Exalogic

    - by Sanjeev Sharma
    Have your CRM applications been growing in cost and complexity? Do your customers want to reach you through more channels than ever? Does your business need to handle peak sales and customer service demand, but your IT budget only covers current needs? Learn how Oracle Exalogic combines Oracle hardware and software to achieve breakthrough performance and scalability, and how real Oracle customers are simplifying the deployment and management of their CRM applications. Register for the webcast here.

    Read the article

  • Screenshot Tour: Ubuntu Touch 14.04 on a Nexus 7

    - by Chris Hoffman
    Ubuntu 14.04 LTS will “form the basis of the first commercially available Ubuntu tablets,” according to Canonical. We installed Ubuntu Touch 14.04 on our own hardware to see what those tablets will be like. We don’t recommend installing this yourself, as it’s still not a polished, complete experience. We’re using “Ubuntu Touch” as shorthand here — apparently this project’s new name is “Ubuntu For Devices.” The Welcome Screen Ubuntu’s touch interface is all about edge swipes and hidden interface elements — it has a lot in common with Windows 8, actually. You’ll see the welcome screen when you boot up or unlock a Ubuntu tablet or phone. If you have new emails, text messages, or other information, it will appear on this screen along with the time and date. If you don’t, you’ll just see a message saying “No data sources available.” The Dash Swipe in from the right edge of the welcome screen to access the Dash, or home screen. This is actually very similar to the Dash on Ubuntu’s Unity desktop. This isn’t a surprise — Canonical wants the desktop and touch versions of Ubuntu to use the same code. In the future, the desktop and touch versions of Ubuntu will use the same version of Unity and Unity will adjust its interface depending on what type of device your’e using. Here you’ll find apps you have installed and apps available to install. Tap an installed app to launch it or tap an available app to view more details and install it. Tap the My apps or Available headings to view a complete list of apps you have installed or apps you can install. Tap the Search box at the top of the screen to start searching — this is how you’d search for new apps to install. As you’d expect, a touch keyboard appears when you tap in the Search field or any other text field. The launcher isn’t just for apps. Tap the Apps heading at the top of the screen and you’ll see hidden text appear — Music, Video, and Scopes. This hidden navigation is used throughout Ubuntu’s different apps and can be easy to miss at first. Swipe to the left or right to move between these screens. These screens are also similar to the different panels in Unity on the desktop. The Scopes section allows you to view different search scopes you have installed. These are used to search different sources when you start a search from the Dash. Search from the Music or Videos scopes to search for local media files on your device or media files online. For example, searching in the Music scope will show you music results from Grooveshark by default. Navigating Ubuntu Touch Swipe in from the left edge anywhere on the system to open the launcher, a bar with shortcuts to apps. This launcher is very similar to the launcher on the left of Ubuntu’s Unity desktop — that’s the whole idea, after all. Once you’ve opened an app, you can leave the app by swiping in from the left. The launcher will appear — keep moving your finger towards the right edge of teh screen. This will swipe the current app off the screen, taking you back to the Dash. Once back on the Dash, you’ll see your open apps represented as thumbnails under Recent. Tap a thumbnail here to go back to a running app. To remove an app from here, long-press it and tap the X button that appears. Swipe in from the right edge in any app to quickly switch between recent apps. Swipe in from the right edge and hold your finger down to reveal an application switcher that shows all your recent apps and lets you choose between them. Swipe down from the top of the screen to access the indicator panel. Here you can connect to Wi-Fi networks, view upcoming events, control GPS and Bluetooth hardware, adjust sound settings, see incoming messages, and more. This panel is for quick access to hardware settings and notifications, just like the indicators on Ubuntu’s Unity desktop. The Apps System settings not included in the pull-down panel are available in the System Settings app. To access it, tap My apps on the Dash and tap System Settings, search for the System Settings app, or open the launcher bar and tap the settings icon. The settings here a bit limited compared to other operating systems, but many of the important options are available here. You can add Evernote, Ubuntu One, Twitter, Facebook, and Google accounts from here. A free Ubuntu One account is mandatory for downloading and updating apps. A Google account can be used to sync contacts and calendar events. Some apps on Ubuntu are native apps, while many are web apps. For example, the Twitter, Gmail, Amazon, Facebook, and eBay apps included by default are all web apps that open each service’s mobile website as an app. Other applications, such as the Weather, Calendar, Dialer, Calculator, and Notes apps are native applications. Theoretically, both types of apps will be able to scale to different screen resolutions. Ubuntu Touch and Ubuntu desktop may one day share the same apps, which will adapt to different display sizes and input methods. Like Windows 8 apps, Ubuntu apps hide interface elements by default, providing you with a full-screen view of the content. Swipe up from the bottom of an app’s screen to view its interface elements. For example, swiping up from the bottom of the Web Browser app reveals Back, Forward, and Refresh buttons, along with an address bar and Activity button so you can view current and recent web pages. Swipe up even more from the bottom and you’ll see a button hovering in the middle of the app. Tap the button and you’ll see many more settings. This is an overflow area for application options and functions that can’t fit on the navigation bar. The Terminal app has a few surprising Easter eggs in this panel, including a “Hack into the NSA” option. Tap it and the following text will appear in the terminal: That’s not very nice, now tracing your location . . . . . . . . . . . .Trace failed You got away this time, but don’t try again. We’d expect to see such Easter eggs disappear before Ubuntu Touch actually ships on real devices. Ubuntu Touch has come a long way, but it’s still not something you want to use today. For example, it doesn’t even have a built-in email client — you’ll have to us your email service’s mobile website. Few apps are available, and many of the ones that are are just mobile websites. It’s not a polished operating system intended for normal users yet — it’s more of a preview for developers and device manufacturers. If you really want to try it yourself, you can install it on a Wi-Fi Nexus 7 (2013), Nexus 10, or Nexus 4 device. Follow Ubuntu’s installation instructions here.

    Read the article

  • Does the method of adjustment matter, or just the final calibration?

    - by Steve
    A company produces software (and hardware) that is used to both perform automatic adjustments on electronic test equipment as well as perform calibrations of the same equipment. The results of the calibrations are put onto a certificate of calibration that is sent to the customer along with the equipment. This calibration certificate states various conditions of the calibration, such as what hardware (models/serial numbers) and software (version) was used to perform the calibration, as well as things like environmental conditions, etc. Making the assumption that the software used to produce the data (and listed on the calibration certificate) used on the certificate of calibration must have gone through a "test/release" process and must be considered "released" software - does this also mean that the software used for adjustment must also be released? I believe that the method (software/environmental conditions/etc) used or present during adjustment doesn't matter, all that really matters is the end result of the calibration, the conditions present during the calibration, and whether or not the equipment was within the specifications. The real question I'm hoping to get answered: Is there a reputable source (e.g. NIST or somewhere similar) that addresses this question? (I have searched...) The thinking is that during high volume production runs, the "unreleased" system can be used to perform adjustments, as long as a released system is used to perform the calibrations, since the time required to perform the adjustments is much longer than the calibration. This unreleased system will eventually become released for use, but currently is not. Also, please not that there is a distinction between "adjustment" and "calibration". The definition from BIPM International vocabulary of metrology, 2.39: Operation that, under specified conditions, in a first step, establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties (of the calibrated instrument or secondary standard) and, in a second step, uses this information to establish a relation for obtaining a measurement result from an indication. Followed by NOTE 2 (emphasis in original text): Calibration should not be confused with adjustment of a measuring system, often mistakenly called "self-calibration", nor with verification of calibration As a side note, I'm not sure why this got down voted. It's regarding software and it's use before and after release for use. I believe there is a best practice that can be applied and this is (hopefully) not primarily opinion based.

    Read the article

  • SQLAuthority News Interesting Whitepaper We Loaded 1TB in 30 Minutes with SSIS, and So Can You

    In February 2008, Microsoft announced a record-breaking data load using Microsoft SQL Server Integration Services (SSIS): 1 TB of data in less than 30 minutes. That data load, using SQL Server Integration Services, was 30% faster than the previous best time using a commercial ETL tool. This paper outlines what it took: the software, hardware, [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • lsusb - where device description comes from

    - by tommyk
    For one of my attached USB devices (2773:0104) I see no description in lsusb command output: user@Thinkpad-Laptop:~/binaries$ lsusb Bus 008 Device 002: ID 0a5c:217f Broadcom Corp. Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 036: ID 2773:0104 Where USB description is comming from, is it from device driver or is it stored in the hardware itself ?

    Read the article

  • Driver for the Intel GMA X4500HD

    - by broiyan
    I have a Dell Vostro 220s with the built-in Intel GMA X4500HD graphics adapter. I am using Maverick (10.10). My Philips 190CW 1440 x 900 pixel monitor is connected via the analog path. After a fresh installation of Maverick, this works on various resolutions but 1440 x 900 is not one of the available options. I may need a hardware specific driver. Does a GMA X4500HD driver exist that will work on Maverick?

    Read the article

  • What is new in Fedora 13 ?

    <b>Linux and Microcontroller Tips:</b> "Automatic Print Driver Installation : gutenprint-packages such as cups, hpijs and pbm2l2030 must be installed on demand when the hardware that require drivers are detected."

    Read the article

  • Cloud Computing Can Help You Realize Savings

    Simply speaking, the concept of cloud computing allows you to forget about the size, the scalability, the usually large capital investment for your hardware infrastructure. It may be difficult to gra... [Author: George Hadjiyanis - Computers and Internet - March 23, 2010]

    Read the article

  • Which driver for ATI Radeon 9600 All-In-Wonder

    - by vanja
    I'm very new to Ubuntu and Linux for that matter, and wondering if anyone there found proper drivers for ATI Radeon 9600 All-In-Wonder. The system (Ubuntu 12.04) doesn't let me change screes resolution and it's not recognizing the card.. I found this page http://wiki.cchtml.com/index.php/Hardware that shows some info but i'm really confused where to start and if it's possible at all to make everything work. Any help would be really appreciated. Thanks in advance!! -vanja

    Read the article

  • The Internet Key Wave MW833UP is not recognized in Ubuntu

    - by gio900
    I can't use my Onda MW833UP... :( Any advice? Here is something that someone else may understand: ~$: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric ~$: lsusb Bus 001 Device 005: ID 1ee8:0012 ~$: dmesg [ 22.709475] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 22.714856] usbcore: registered new interface driver cdc_acm [ 22.714866] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 23.520490] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 24.244530] usbcore: registered new interface driver usbserial [ 24.244575] USB Serial support registered for generic [ 24.244673] usbcore: registered new interface driver usbserial_generic [ 24.244681] usbserial: USB Serial Driver core [ 24.265879] USB Serial support registered for GSM modem (1-port) [ 24.285680] usbcore: registered new interface driver option [ 24.285691] option: v0.7.2:USB Driver for GSM modems [ 24.425878] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=600 [ 24.736540] EXT4-fs (sda8): re-mounted. Opts: commit=600 [ 35.705796] Easy slow down manager: checking for SABI support. [ 35.706002] Easy slow down manager: SABI is supported (f5189) [ 36.060099] usbcore: deregistering interface driver uvcvideo [ 139.508061] CE: hpet increased min_delta_ns to 20113 nsec [ 6798.378917] usb 1-1: USB disconnect, device number 5 [ 6809.108232] usb 1-1: new high speed USB device number 6 using ehci_hcd [ 6809.242692] scsi5 : usb-storage 1-1:1.0 [ 6810.241257] scsi 5:0:0:0: CD-ROM Onda Datacard CD-ROM 0001 PQ: 0 ANSI: 0 [ 6810.241841] scsi 5:0:0:1: Direct-Access Onda Storage 0001 PQ: 0 ANSI: 0 [ 6810.271410] sr0: scsi3-mmc drive: 0x/0x caddy [ 6810.272099] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6810.272852] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 6810.279954] sd 5:0:0:1: [sdb] Attached SCSI removable disk [ 6810.281210] sd 5:0:0:1: Attached scsi generic sg2 type 0 [ 6810.380591] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.380617] sr: Sense Key : Hardware Error [current] [ 6810.380625] sr: Add. Sense: No additional sense information [ 6810.613937] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.613972] sr: Sense Key : Hardware Error [current] [ 6810.613984] sr: Add. Sense: No additional sense information [ 6810.673716] usb 1-1: USB disconnect, device number 6 [ 6815.572142] usb 1-1: new high speed USB device number 7 using ehci_hcd [ 6815.706828] cdc_acm 1-1:1.0: ttyACM0: USB ACM device The last 3 lines are where I inserted the Internet key, then reconnected it. usb-device T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1ee8 ProdID=0012 Rev=00.01 S: Manufacturer=Onda S: Product=MW833UP S: SerialNumber=9230B35D870F9CB7AE684EACC5C12BE5EC33B26E C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm Then there is /dev/ttyACM0. When the key is connected to the USB port, everything that will meant...

    Read the article

  • Microphone crackling in Ubuntu 12.04

    - by Tomas
    I am not very experienced in linux and have this problem with microphone which works fine on Windows. Microphone is external one and when listening to recorded sound (both Sound Recorder and Skype Echo Test) you can hear crackling noise. I fixed output crackling by replacing load-module module-hal-detect with load-module module-hal-detect tsched=0 in /etc/pulse/default.pa but I have no idea how to fix input. Hardware info: Card: HDA ATI SB Chip: Realtek ALC272X Thanks for help!

    Read the article

  • Ubuntu 14.04 key arrow up is being pressed by itself

    - by Margo Nikolopoulou
    Keyboard's up arrow key is keep pressing itself every few seconds. I tried to install Ubuntu 14.04 via boot cd, even before installation the arrow key was being pressed by itself. I tried to use Ubuntu first without installing it and then tried to install it from there, the issue seemed to be fixed. I was using the PC for months until out of the blue the issue came back. IT IS NOT A HARDWARE ISSUE! Thank you in advance.

    Read the article

  • Network Inventory Software

    The necessary condition of a company successful operation is a good state of computer assets. That is why all the company?s software and hardware should be inventoried on the regular basis. A system ... [Author: Dmitriy Stepanov - Computers and Internet - March 21, 2010]

    Read the article

  • Minimalist Linux desktops

    <b>The H Open:</b> "Lightweight desktops have a multitude of uses, on netbooks, for mobile devices, for older hardware, for users with limited requirements of their systems, for connecting to applications in the cloud, and for bare knuckled programmers who prefer to work closer to the metal."

    Read the article

  • Ubuntu Workstation

    - by John Smith
    I bought a dell inspiron n5110 hoping that i'll be able to use it fine with Linux; however i couldn't install the video card drivers and in 8 months the motherboard burned because the power management wasn't right and it was overheating. I want to buy a workstation pc that works with ubuntu. Does anyone have any suggestions? I'd like to have the videocard and all other hardware to be used properly Thank you

    Read the article

  • Ubuntu boots to orange screen after install

    - by musicalfish8
    I have a problem in which I boot my computer and everything works normally, I see a purple screen with various partitions to select such as my Windows 7 and Ubuntu partitions. When I select the Ubuntu one, my computer boots to an orangish screen and plays what sounds like a drum sound once. Then nothing happens and I have to reboot my computer because the computer is stuck at this orange screen. EDIT: My hardware is: Asus M5A97 motherboard AMD Phenom II 630 processor MSI r6670 MD1GD5 GPU TrendNet TEW-641PC Wireless Card

    Read the article

  • Brightness options in Ubuntu 12.04 desktop missing

    - by Harsh Thakar
    I am unable to change the brightness of my desktop screen using this path. System settings{top right corner of the screen)Under Personal Brightness & lock.No option to change brightness is available here.In Ubuntu 11.04 Shift key + +/- key was used to change brightness,the same doesn't work in 12.04. Also under System settings{top right corner of the screen)Under Hardware Displays,my monitor is recognized as a Laptop despite me using a desktop!

    Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >