Search Results

Search found 5885 results on 236 pages for 'and finally'.

Page 128/236 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

• Server 2008 RAID 5 Write Speeds

  - by Solipsism

  I recently configured a RAID 5 partition in Server 2008 with 4 RAID 5 disks. These disks are connected through a SATA expansion card that uses PCIe. This morning, I checked and they had finally finished synchronizing, and so I tried to do some speed tests. Copying off the disks started pretty much fine - speeds began at 125MB/s, then trailed down to about 70MB/s, which I found odd but not worrying. Writing TO the disks however is a completely different story. I attempted to copy some of my VM host ISOs onto the disks (~2-4 GB apiece) and this resulted in speeds of approximately 10MB/s. I tried copying both from a local disk (connected directly to the motherboard) and from another server ththe gigabit network and results were the same. I checked the performance monitor while transferring the files and the only thing that stuck out was that my memory hard faults shot up to 6,000 per minute (spiking around 200/s) by explorer.exe. The system is running 2GB of DDR667 ECC RAM and a quad-core 2.3GHz opteron. Is there anything I can do to fix this performance issue (buy more RAM? move the drives to a faster box?, etc) or am I just screwed so long as I stick to windows.

  Read the article

• iTunes copy just metadata (song and album ratings, playlists) from iPod

  - by Jared Updike

  I have an iPod touch that I synched with my Windows computer (iTunes 9.0 I think) until my harddrive failed and I lost my entire library. I rebuilt the library (songs) from a year old backup (and various other source for songs) but my playlists and ratings are of course a year old. My iPod itself has most of the playlists and ratings I care most about (favorite songs and albums, rated 4 and 5, for example). I have a catch 22 situation where I feel nervous that I haven't backed up my iPod in around 4 months (when my drive failed) so I'd like to back it up as soon as possible... but if I back it up I have to clear all the songs and playlists and copy them back, which I can't really do since I need to rebuild my playlists on my computer first (using the data only available on my iPod!) The question: is there a better way to READ the information off my iPod than doing it manually, song by song and album by album and playlist by playlist (XML, text dump, database, spreadsheet, anything). In other words, mostly I want the information (metadata like ratings and playlists, not songs) copied off the iPod so I can more quickly get my iTunes library ratings and playlists re-built (manually) so I can finally wipe the music and back up my apps, etc. Then I'd like to copy the music back immediately. The part I'd like to avoid is manually navigating everything on my iPod to read through all the playlists and ratings (50 GB, 6,000+ songs) as I re-enter all of that data by hand. I've done a few dozen albums and it's pretty time consuming having to tap around on the iPod. Reading from a spreadsheet (for example, or XML which I could write a script to get into spreadsheet form) would probably help tremendously, plus then I'd have a backup of that information somewhere besides just my iPod.

  Read the article

• Protect all XML-RPC calls with HTTP basic auth but one

  - by bodom_lx

  I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

  Read the article

• How to recover deleted files on ext3 fs

  - by Mike

  I have a drive which was using the ext3 filesystem. I am told that about 10Gb of data was deleted off the drive (probably via rm). The drive is currently mounted as read-only to preserve all data. Does anyone know of a method to restore some or all of the data? Also if it helps, the OS was Fedora. I've also been told that the data is mostly ASCII fortan source code and Matlab files. Conclusion I have finally managed to get the data back, and with the simplest means ever! After weeks of trying and failing to bring back much of any data, I brought someone in today to take a look at it and offer suggestions, he simply cd'd to the directory and everything was there! It was never lost in the first place!!! Needless to say I feel really dumb right now, but I learned quite a lot with this whole fiasco. At any rate, while I was looking through data forensics solutions, I found that the Autopsy, or more specifically the SleuthKit was the most helpful. So I will accept that as the final answer. I would also like to note for anyone that comes across this later on that the most up-voted (currently) answer by sekenre was also helpful and I learned a lot, but ultimately it did not help with the type (very many, and some being very large) of files I was dealing with. So thank to all you that provided suggestions and wish you all the best!

  Read the article

• Problem with Strange VMWare behaviour when shutting down guest.

  - by adza77

  Hi, I've been having a problem for a while now with VMWare Workstaion. (Originally with 6.5, but now with 7.0 and 7.0.1 too). The problem occurs when I choose to shut down a guest. VMWare itself seems to hang. If I choose to shut down a guest that's opened full screen, and during the process I minimise the screen to work on other applications in the host, often (not all the time) when I return to the guest I have a 'greyed out' screen and the system becomes unresponsive. The host O/S still seems to be working, but I am unable to switch to other applications. (I can bring up the taskbar on the host and 'see' other applications and even switch to them, but VMWare still stays 'on top' being unresponsive). I can not terminate VMWare even when windows says that the application has become unresponsive and gives me the option to terminate. VMWare stays on top, and I'm forced to either shutdown, or log off and log back on in order to regain control of my computer. This happens with both Windows 7 and Windows Vista guest operating systems (32 bit), and I have had it happen on multiple host machines, and multiple guest machines too. Current Host: Windows 7 64 bit, 8GB Ram, 500GB HDD, i7 Processor. I have been searching for more than 6 months for a solution but have found none, so finally decided to post here. Does anyone know what might be causing the problem (+or even how to minimize the VM so I can at least access any other applications and save work before forcing a logoff / reboot+) would be extrememly handly. If I know the correct keystrokes to save and close in an application on the host I can do this by task-switching to the desired app to save and close successfully, but I can't see what I'm doing because VMWare Workstation is still on-top 'greyed' out. Cheers Adam.

  Read the article

• Problem with Strange VMWare behaviour when shutting down guest.

  - by adza77

  Hi, I've been having a problem for a while now with VMWare Workstaion. (Originally with 6.5, but now with 7.0 and 7.0.1 too). The problem occurs when I choose to shut down a guest. VMWare itself seems to hang. If I choose to shut down a guest that's opened full screen, and during the process I minimise the screen to work on other applications in the host, often (not all the time) when I return to the guest I have a 'greyed out' screen and the system becomes unresponsive. The host O/S still seems to be working, but I am unable to switch to other applications. (I can bring up the taskbar on the host and 'see' other applications and even switch to them, but VMWare still stays 'on top' being unresponsive). I can not terminate VMWare even when windows says that the application has become unresponsive and gives me the option to terminate. VMWare stays on top, and I'm forced to either shutdown, or log off and log back on in order to regain control of my computer. This happens with both Windows 7 and Windows Vista guest operating systems (32 bit), and I have had it happen on multiple host machines, and multiple guest machines too. Current Host: Windows 7 64 bit, 8GB Ram, 500GB HDD, i7 Processor. I have been searching for more than 6 months for a solution but have found none, so finally decided to post here. Does anyone know what might be causing the problem (+or even how to minimize the VM so I can at least access any other applications and save work before forcing a logoff / reboot+) would be extrememly handly. If I know the correct keystrokes to save and close in an application on the host I can do this by task-switching to the desired app to save and close successfully, but I can't see what I'm doing because VMWare Workstation is still on-top 'greyed' out. Cheers Adam.

  Read the article

• Is it bad to redirect http to https?

  - by jasondavis

  I just installed an SSL Certificate on my server. I use a web hosting panel called ZPanel that is an open source project. It then set up a redirect for all traffic on my domain on Port 80 to redirect it to Port 443. In other words, all my http://example.com traffic is now redirected to the appropriate https://example.com version of the page. The redirect is done in my Apache Virtual Hosts file with something like this... RewriteEngine on ReWriteCond %{SERVER_PORT} !^443$ RewriteRule ^/(.*) https://%{HTTP_HOST}/$1 [NC,R,L] My question is, are there any drawbacks to using SSL? Since this is not a 301 Redirect, will I lose link juice/ranking in search engines by switching to https? I appreciate the help. I have always wanted to set up SSL on a server, just for the practice of doing it, and I finally decided to do it tonight. It seems to be working well so far, but I am not sure if it's a good idea to use this on every page. My site is not eCommerce and doesn't handle sensitive data; it's mainly for looks and the thrill of installing it for learning. UPDATED ISSUE Strangely Bing creates this screenshot from my site now that it is using HTTPS everywhere...

  Read the article

• Can you see something wrong in my .htaccess?

  - by AlexV

  OK, after many search, trial and errors I've managed to create an .htaccess that do what I wanted (see explanations and questions after the code block): <IfModule mod_rewrite.c> RewriteEngine On #1 If the requested file is not url-mapper.php (to avoid .htaccess loop) RewriteCond %{REQUEST_FILENAME} (?<!url-mapper\.php)$ #2 If the requested URI does not end with an extension OR if the URI ends with .php* RewriteCond %{REQUEST_URI} !\.(.*) [OR] RewriteCond %{REQUEST_URI} \.php.*$ [NC] #3 If the requested URI is not in an excluded location RewriteCond %{REQUEST_URI} !^/seo-urls\/(excluded1|excluded2)(/.*)?$ #Then serve the URI via the mapper RewriteRule .* /seo-urls/url-mapper.php?uri=%{REQUEST_URI} [L,QSA] </IfModule> This is what the .htaccess should do: #1 is checking that the file requested is not url-mapper.php (to avoid infinite redirect loops). This file will always be at the root of the domain. #2 the .htaccess must only catch URLs that don't end with an extension (www.foo.com -- catch | www.foo.com/catch-me -- catch | www.foo.com/dont-catch.me -- don't catch) and URLs ending with .php* files (.php, .php4, .php5, .php123...). #3 some directories (and childs) can be excluded from the .htaccess (in this case /seo-urls/excluded1 and /seo-urls/excluded2). Finally the .htaccess feed the mapper with an hidden GET parameter named uri containing the requested uri. Even if I tested and everything works, I want to know if what I do is correct (and if it's the "best" way to do it). I've learned a lot with this "project" but I still consider myself a beginner at .htaccess and regular expressions so I want to triple check it there before putting it in production...

  Read the article

• Is it possible to get ESC to behave as an actual escape key?

  - by leftaroundabout

  So I have finally switched, not so much because I'm yet convinced Emacs in itself is the better editor but because it certainly does have more powerful extensions. I am still using vim-mode though, perhaps that's part of my problem... but I really don't intend to abandon the modes-approach, so I'll probably stay with it. I'm getting along quite well, but one thing I find really unnerving is the behaviour of the esc key (which I have in the shift-lock position). I'm used to relying on this a lot as more or less a "panic key", which may not be nice but I find allows me to work generally quite a bit less caring about the keystrokes themselves, and thus faster. What I'd like this key to do is just get me out of any minibuffer or special editing mode into a well-defined normal state. Perhaps most importantly, I would like it to not do anything unrelated, Simulate meta. What do I have an alt key for? Close windows I'm not even in at the time. Getting interpreted as the final key in some key sequence. ... Is it possible to turn all that off and make esc an actual escape key? Vim-mode does make it behave kind of as I like in some situations, but when other plugins are involves this often breaks. Alternatively, are there different options that might suit my kind of workflow?

  Read the article

• Half of installed RAM is hardware reserved

  - by user968270

  After a rather arduous and convoluted series of problems that left me without a desktop for ~80 days, I've finally got the thing up and running, having replaced the power supply, motherboard, graphics card and CPU. Now, however, I'm experiencing the 'hardware reserved RAM' issue. Perhaps this is the exhaustion talking, but looking at the question that tends to get pointed to when this kind of topic gets locked as a duplicate hasn't helped. I have 16 GB of RAM installed in an MSi 970A-G46, which is spec'd for up to 32 GB of RAM. The BIOS recognizes that I have 16 GB installed, and the resource monitor also shows the whole 16 GB, only it shows 8 GB as hardware reserved. I've seen suggestions that it's an OS issue, but the particular installation of Windows 7 (64-bit) which I'm running on my boot drive is the same as the one that could actually access the 16 GB in my previous motherboard (MSi 870A-G54). I've updated my BIOS using the MSi Live Update tool and restarted the machine with no effect, and I cannot seem to locate any 'Memory Remapping' option as I've seen mentioned. I've physically swapped the RAM between the slots to no effect. I've unchecked the Maximum Memory box in the msconfig Boot tab's advanced options, also to no effect. These are my system's basic specifications OS: Windows 7 Home Premium (64-Bit) Motherboard: MSi 970A-G46 CPU: AMD FX-8150 Graphics Card: XFX Radeon HD 6870 Boot Drive: OCZ Agility 3 Storage Drive: Samsung Spinpoint F3 ST1000DM005/HD103SJ 1TB PSU: Thermaltake TR-2 TR600 600W ATX12V v2.3

  Read the article

• ssh Password-less login to multiple machines when you already have one

  - by tandu

  I'm a little bit confused about setting up a password-less login for multiple machines to begin with, but I think I could do it from scratch. The problem is I already have it set up for one machine and I don't want that to be blown away when I try to set it up for the other machine. Let's clarify: Machine A: the machine I'm connecting from Machine B: the machine I'm connecting to. Password required Machine C: the machine I'm connecting to. Password-less ssh I have read some tutorials on setting up password-less ssh to a certain site, but they usually start with "move id_rsa out of the way so it doesn't get blown away," but then at the end of the tutorial it's not moved back. If I had no help at all, here is what I would do: Log into B ssh-keygen -t rsa -f ~/id_rsa.other scp id_rsa.other.pub A:~/.ssh echo "Host A \n Identity File ~/.ssh/id_rsa.other" > ~/.ssh/config (Note that I realize these commands may not be exactly correct, but this is just the idea). What I'm not quite clear on is if I need to update the config for A, B, or both. I'm fairly certain to do a password-less login from A to B, it is A that needs the public key .. but I also suppose I need B to use the correct id_rsa file for that public key. Finally, I don't want the password-less login for C to be affected at all .. it's using id_rsa. Am I going wrong anywhere?

  Read the article

• How to tell Linux to explicitly swap out main memory of a suspended process?

  - by Vi

  I run a memory-hungry process (mkcromfs) which consumes more memory than I have physical memory on my latop, so it is paging and swappin and thrashing all the time and loadavg is about 2 (compcache is already in use with usual swap partition as well), but slowly moving forward (Although I afraid it will finally try to allocate 2GB and crash draining 2 days of thrashing). When I want to use the laptop for something else, I stop the process, start X server, firefox and other programs. The problem is that when I start Firefox the loadavg jumps to 10 and the system becomes almost unresponsive at all (long time to turn on/off caps lock, slow mouse cursor position updates, slow switching from X server to Linux console, slow login). The stopped mkcromfs still holds a lot of memory (464.8 MiB and slowly falling) and moves it to swap only when more memory is needed for some other program, which results in a great slowdown. How to tell the Linux to swap out this process entirely (e.g. I'm not intending to resume it in short term), possibly waking from swap other data? Also it will be useful to be able to specify the exact swap device to swap the given process out.

  Read the article

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• Apache Named Virtual Hosts and HTTPS

  - by Freddie Witherden

  I have an SSL certificate which is valid for multiple (sub-) domains. In Apache I have configured this as follows: In /etc/apache2/apache2.conf NameVirtualHost <my ip>:443 Then for one named virtual host I have <VirtualHost <my ip>:443> ServerName ... SSLEngine on SSLCertificateFile ... SSLCertificateKeyFile ... SSLCertificateChainFile ... SSLCACertificateFile ... </VirtualHost> Finally, for every other site I want to be accessible over HTTPS I just have a <VirtualHost <my ip>:443> ServerName ... </VirtualHost> The good news is that it works. However, when I start Apache I get warning messages [warn] Init: SSL server IP/port conflict: Domain A:443 (...) vs. Domain B:443 (...) [warn] Init: SSL server IP/port conflict: Domain C:443 (...) vs. Domain B:443 (...) [warn] Init: You should not use name-based virtual hosts in conjunction with SSL!! So, my question is: how should I be configuring this? Clearly from the warning messages I am doing something wrong (although it does work!), however, the above configuration was the only one I could get to work. It is somewhat annoying as the configuration files have an explicit dependence on my IP address.

  Read the article

• How do you enable webcam support in Facebook for Ubuntu 10.04?

  - by Jonathan

  I think I have finally arrived at an insolvable equation: Chromium v.7 + Ubuntu 10.04 + Sun Java 6 + Webcam + Facebook + Flash 10 = non-functional All of those items listed above are potential points of failure in this situation, and any help narrowing them down would be fantastic. I am simply trying to enable webcame support directly through Facebooks website. Forum searches and the usual googling turn up few posts related to this specific equation. Two of the major suggestions include: 1) Installing the Sun (I refuse to say oracle sob)-provided Java implementation instead of the OpenJDK normally installed in Ubuntu. And yes, after installing it, I did update all my default supports to use the sun commands over the openjdk. 2) Somehow enabling Facebook as a permitted site to access my webcam using Flash settings. I have not been able to explore option 2 because I cannot find a way to adjust the Flash settings in chromium 7. Other factors that do not help include the fact that I am pretty sure facebook changes its webcam interface every 10 seconds just to keep troubleshooters and support personnel on their toes. If anyone has a OTP that informs us of the next shift in the app, a leak would be greatly appreciated!

  Read the article

• How to make Firefox file associations consistent with Ubuntu file associations?

  - by wbharding

  This seems to be a pretty commonly Google question, but one for which there are no answers. http://www.linuxquestions.org/questions/linux-software-2/firefox-download-mime-types-378902 http://www.birkit.com/content/kubuntu-linux/internet/firefox/fix-file-associations-in-firefox.html Being three links amongst the many. The gist of what I want to accomplish is to have Firefox understand the file associations I download without me having to manually map all of them myself. Gnome knows the file extensions, so I would have expected that Firefox could just use the already-known file mappings there to open the right stuff (as I presume Chrome does). But it doesn't. At least not for me, using Firefox 4, and not by default. When I click on a downloaded file right now, Firefox always has to ask me what application should be used to open the file. A handful of Google results tell me that I can reassociate my file extensions by deleting ~/.mozilla/firefox/[profile name]/mimeTypes.rdf, but while deleting that file does in fact result in a new mimeTypes file being generated, the new mimeTypes is just as barren as the old one had been. Based on the amount of unanswered Qs on the Googlesphere, I know this is a very common problem for Ubuntu users, but it seems to be one for which nobody has chimed in with a good solution. Maybe Superuser can finally be the panacea for us all?

  Read the article

• How to add a writable folder to the PHP document root on linux

  - by Ron Whites

  We are building an example bash script for our PHP TestCoverage Tool use on Linux. The development environment is Ubuntu 12.04_1 but we intend to have the linux example work across as many linux versions as possible without modification. The example linux script requires a variable be set to the PHP Document Root path and by default uses a small PHP example source to show the user how our GUI and text report shows the covered and uncovered PHP code areas. The linux script is also intended to be easily alterable by the user to automate the TestCoverage display of users PHP code. The problem we are having with Ubuntu 12.04 (any linux?) is that the PHP Apache2 document root is defined in /etc/apache2/sites-available/default as /var/www and /var/www is defaulted with "drwxr-xr-x" read only access. So in order to add our own folder as /var/www/SDTestCoverage we must change /var/www to "drwxrwxrwx" read-write access. So it seems our script (at least on Ubuntu) will need to ... 1. acquire and save the /var/www permissions then do .. 2. sudo chmod 777 /var/www (to make writable) 3. mkdir -p /var/www/SDTestCoverage (create our folder under the document root) 4. sudo chmod 777 /var/www/SDTestCoverage (make our subfolder writable) 5. and finally restore /var/www permissions Thanks and our Questions are .. 1. Is this the standard way (using Ubuntu) one adds a writable folder under the PHP Document Root? 2. Is this the most general purpose way one adds a writable folder under the PHP Document Root on other versions of Linux?

  Read the article

• Network driver for Hyper-V restore from Windows Home Server

  - by Philipp Schmid

  I have backed up Windows Server 2008 running virtualized on Hyper-V to a Windows Home Server 2008 SP1 (I know I should have backed up the VHD instead). Now I need to restore the contents of the VM from WHS. I have created a restore CD ISO and used it to create a new VM. It all works as advertised up to the point where the restore process wants to load the network drivers (it only finds 4 disk drivers on the restore CD. but no network drivers). So I created a virtual floppy and copied the contents of 'Home Server Drivers for Restore onto it. But no luck! I have tried moving the 4 subdirectories into the root of the floppy, but that didn't work either. Finally, I started another instance of the WS 2008 to identify the network driver that the virtualized instance is using (%WINDOWS%\system32\drivers\netvsc60.sys) and copied that file onto the virtual floppy, without success. Does anyone have any suggestions on how to get networking working on a Hyper-V instance running off the Windows Home Server Restore CD? UPDATE: As suggested by delenda, I have added a legacy network adapter to my VM, and indeed I now get a network driver listed! However, the WHS it still not found, even after entering the home server name manually. PHS

  Read the article

• How do you enable webcam support in facebook for ubuntu 10.04?

  - by Jonathan

  I think I have finally arrived at an insolvable equation: Chromium v.7 + Ubuntu 10.04 + Sun Java 6 + Webcam + Facebook + Flash 10 = non-functional All of those items listed above are potential points of failure in this situation, and any help narrowing them down would be fantastic. I am simply trying to enable webcame support directly through Facebooks website. Forum searches and the usual googling turn up few posts related to this specific equation. Two of the major suggestions include: 1) Installing the Sun (I refuse to say oracle sob)-provided Java implementation instead of the OpenJDK normally installed in ubuntu. And yes, after installing it, I did update all my default supports to use the sun commands over the openjdk. 2) Somehow enabling Facebook as a permitted site to access my webcam using Flash settings. I have not been able to explore option 2 because I cannot find a way to adjust the Flash settings in chromium 7. Other factors that do not help include the fact that I am pretty sure facebook changes its webcam interface every 10 seconds just to keep troubleshooters and support personnel on their toes. If anyone has a OTP that informs us of the next shift in the app, a leak would be greatly appreciated! Cheers!

  Read the article

• How to write rules for persistent net names?

  - by ndemou

  I know that a process generates persistent network card names based on rules found in /lib/udev/rules.d/75-persistent-net-generator.rules. I also know how to completely disable this process with a simple echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules but I've read that I "could also write my own rules file to give the interface a name — the persistent rules generator ignores the interface if a name has already been set" (/etc/udev/rules.d/README confirms that this is possible). Do you have any pointers to documentation about how to write such rules? (I mostly care about Debian/Ubuntu and a bit less for CentOS) As a specific example of why I want to write custom rules: I have two identical servers with one onboard LAN and one PCI LAN. In case of HW failure I want to be able to move disks from HW#1 to HW#2 and it's important for eth0 to continue pointing to the onboard card and eth1 to the PCI card (no one wants to mess with cabling in the middle of a HW failure panic). My current workaround works but is a lot of work[1] so I wonder if writing custom rules would allow me to express something simple like this: cards with MAC A or B should be named eth0 cards with MAC C or D should be named eth1 follow default naming scheme for anything else [1] install the OS in HW#1 and keep a copy of /etc/udev/rules.d/70-persistent-net.rules. Move the disks to HW#2 and keep a second copy of the same file. Concatenate the two copies and manually edit the NAME="ethX" part. Replace /etc/udev/rules.d/70-persistent-net.rules with my version. Finally disable auto-creation of a new 70-persistent-net.rules using echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules

  Read the article

• How can see what processes makes my server slow?

  - by Steven

  All my websites on my server are extremely slow or not loading at all. Even server admin (Plesk) will not load some times. There's been no changes to the sites for the last coupple of months. How can I see what processes is making my server slow? My environment looks like this: Server: VPS running Linux 2.8.x OS: Centos 5 Manage interface: Plesk 9.x Memmory: 1024MB CPU: 2.2GHz My websites run on PHP and MySQL. I finally managed to telnet (Putty + SSH) in to my server. Running top did not show any processes using more than max 2% CPU and none were using exesive memmory. I also got a friend to install a program that checks the core files, and all seemed fine. So I'm leaning towards network issues or some other server malfunction. But I'm not able to find out what can be wrong. Here are some answers to Sean Kimball: I don't run mail services on my server yet There are noe specific bandwidth peaks. Prefork looks like this <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> Not sure what you mean with DNS question. But I think it's up and running. There are no processes running wild Where can I find avarage load? Telnet is disabled and I have to log in using SSH :)

  Read the article

• What should I encrypt in Debian during install?

  - by ianfuture

  I have seen various guides and recommendations on web about how best to do this but nothing that clearly explains the best way and why. So I understand there is a need for part of Debian during install to be un-encrypted on its own partition to allow it to boot. Most info I have seen is call this /boot and set the boot flag. Next I believe the best approach is to create another partition out of all the rest of the disk space, encrypt this, then on top of that create a LVM and then within the LVM create my various partitions , name them , select size, and file system type. Can I include /swap in the encrypted LVM part ? Is this approach sound? If so what are the partitions I should use (this is going to be a minimal server install with a view to install as and when what I need for a dev server)? Finally how does the installer know what to put in each partition I define ? I appreciate there are more than one question but any help and suggestions would be appreciated. If further clarification is needed please mention in the comments . EDIT : 16/3/2010 After Richard Holloways reply I thought it relevant to add this info: The reasons why I want to do this are to explore maximising security on any server install and set up, due to interest in the area of Computer Security and Forensics. Also I am trying to peform the task as if it being performed in an enterprise situation. On a technical matter, once set up and configured with minimal packages and ssh this server will not physically be easy to access so I will only be entering via ssh. (Yes I know why encrypt something no one will ever be able to get their hands on? Because I can and I want to is the simple answer, but see above too).

  Read the article

• Need help toubleshooting PC

  - by brux

  I have had problems since my dog pee'd on my computer. Problem: loads windows fine, at random intervals from 5 minutes to 30 minutes it restarts itself. There is nothing in the event log such as errors, no BSOD, just cold restart. after restarting - sometimes- it POST's and restarts itself at the end of POST. It will do this many times and then finally load windows. The cycle then begins again, it will restart eventually. What I have done: I thought it was HDD at first, since this is the only part of the computer which actually got wet with any fluid ( the case is off the PC and the dog pee'd down the front where the HDD is located). Seatool, the seagate HDD tool, found errors when I ran it inside windows, so I ran it in DOS mode from boo-table USB and ran it. It found the same number of errors and fixed them all. I ran the scan again and it says "Good". I loaded windows and ran the scan and it also said "Good there. So the HDD appears to be fine but the problem persists, random restarts. What else could this be? I have taken the computer apart and cleaned everything and also taken the PSU apart and cleaned it thoroughly. The problem still persists, what should my next steps be?

  Read the article

• Windows 7 breaks even in safe mode

  - by delenda

  Hi, I have a Dell XPS M1730 with Windows 7 installed. I noticed last night that after a few hours of use, the fans kicked into full and I couldn't do anything without it taking forever. Minimising windows, opening device manager or even opening process explorer took minutes and a game install I had just started took nearly 4 hours to complete. When procexp finally loaded, the refresh was so slow that it was mostly useless. From what I could gather, it was reporting 60% idle processes with procexp using nearly 40%. There were no hardware interrupts listed. When I rebooted, the problem went away for about 10 minutes and then the same thing happened. The issue persists in safe mode and even after I removed the graphics drivers, which have been an issue in the past, it still happens. Icons flash quite quickly on the desktop periodically and screen refresh is painfully slow. When booting now, the fans kick in to full as soon as the windows logon box comes up and it's taking 10 minutes to bring the desktop up. Chkdsk reports nothing and the raid check says that everything is fine. I'm thinking hardware failure, probably HDD but wanted some other opinions. I'm planning to try a linux live cd to see if it works without using the hard disks. If anyone has any input, it would be greatly appreciated. Delenda

  Read the article

• What are my options in replacing the noisy fan in my Linksys Cisco SRW2008P managed GigE switch?

  - by Fred Sobotka

  My first managed GigE switch, the Linksys SRW2008, was a dream, until it started randomly chattering on various ports. That started while I was on the road all the time, which made it take forever to diagnose, but that's a different problem. When I finally determined that the switch was bad, it was still covered by warranty by Linksys/Cisco, so I opened an RMA ticket and returned it. Unfortunately, Linksys/Cisco "upgraded" my replacement switch to a SRW2008P, which has Power over Ethernet features I never planned on using. That by itself wasn't so bad, but it's my guess that the inclusion of PoE functions in this model required a tiny, super-loud internal fan to keep everything cool. This wasn't something I wanted or asked for, but, now that I am stuck with it, I am investigating options for replacing that little internal fan with something far quieter. For example, if I attach a larger fan to the outsite of the chassis, I think it could push enough air to replace the stock fan that is currently there. Any advice on carrying this out? I have no interest in melting my switch due to insufficient ventilation.

  Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >