Search Results

Search found 4774 results on 191 pages for 'modeless dialog'.

Page 128/191 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

• Music player with a few specific requirements

  - by Jordan Uggla

  I am looking for a music player with a few specific requirements: Must have a search function that whittles down results as you type, searching the entire library. Must start playing a song when double clicked, and not continue to another song when that song finishes. Must be approachable and immediately usable by people completely unfamiliar with the program. I think this is mostly covered by the first two requirements being met. I've tried many players but unfortunately every one has failed to meet at least one of the requirements. Rhythmbox meets 1 and 3, but continues to the next search result after the song which was double clicked ends. Banshee is basically the same as Rhythmbox. While it has an option to "Stop when finished" this cannot (as far as I can tell) be made the default when double clicking a song. Audacious (as far as I can tell) fails at 1. Muine meets requirements 1 and 2, but unfortunately I couldn't make the search dialog always shown like it is with Rhythmbox / Banshee which, despite its very simple interface, made Muine incomprehensible to people trying to use it for the first time. Amarok I could not configure to meet requirement 1, but I think it's likely I was just missing something, and with its configurability I'm confident that I can set it up to meet requirements 2 and 3.

  Read the article

• xmodmap modifications aren't enough - anything else I can do?

  - by Codemonkey

  I'm using an Apple keyboard which has some annoyances compared to other keyboards. Namely, the Alt_L and Super_L keys are swapped, and the bar and less keys are swapped ("|" and "<"). I've written an Xmodmap file to swap the keys back: keycode 49 = less greater less greater onehalf threequarters keycode 64 = Super_L NoSymbol Super_L keycode 94 = bar section bar section brokenbar paragraph keycode 108 = Super_R NoSymbol Super_R keycode 133 = Alt_L Meta_L Alt_L Meta_L keycode 134 = Alt_R Meta_R Alt_R Meta_R I did this by identifying the keys using xev and the default modmap xmodmap -pke and swapping the keycodes. xev now identifies all my keys as correct, which is awesome! I can also use the correct keys to type the bar and less than symbols. (I followed this answer on askubuntu: How do I remap certain keys?) But it seems the change isn't very deep. For instance, the Super key is now broken in the Compiz Settings Manager. No shortcuts involving the Super key works (but the Alt key does). Also the settings dialog for Gnome Do doesn't heed the changes in xmodmap, and I can't open the Gnome Do window anymore if I use any of the remapped keys. So to summarize, everything broke. I would like a deeper way of telling Ubuntu (or any other Linux distro for that matter) which keys are which on the keyboard. Is there a way to edit the Keyboard Layout directly? I'm using the Norwegian Bokmål keyboard layout. Does it reside in a file somewhere I could edit? Any comments, previous experiences or relevant stray thoughts would be greatly appreciated - Thanks

  Read the article

• Sandcastle Help File Builder - October 2010 release

  - by TATWORTH

  At http://shfb.codeplex.com/releases/view/92191, the latest Sandcastle has been released. I am pleased to say that it incorporates the generic version of a fix, I originated that allows projects including Crystal Reports to be documented.Here is the relevant passage from the help file:"The default configuration for MRefBuilder has been updated to ignore the Crystal Reports licensing assembly (BusinessObjects.Licensing.KeycodeDecoder) if it fails to get resolved. This assembly does not appear to be available and ignoring it prevents projects that include Crystal Reports assemblies from failing and being unbuildable."There are many other fixes. Here are the release notes:IMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog.This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release supports Visual Studio 2010 and 2012 solutions and projects as documentation sources, and adds support for projects targeting the .NET 4.5 Framework, .NET Portable Library 4.5, and .NET for Windows Store Apps.See the Sandcastle 2.7.1.0 Release Notes for details on all of the changes made to the underlying Sandcastle tools and presentation styles.This release uses the Sandcastle Guided Installation package. Download and extract to a folder and then runSandcastleInstaller.exe to run the guided installation of Sandcastle, the various extra items, the Sandcastle Help File Builder core components, and the Visual Studio extension package.What's IncludedHelp 1 compiler check and instructions on where to download it and how to install it if neededHelp 2 compiler check and instructions on where to download it and how to install it if neededSandcastle October 2012 2.7.1.0An option to install the MAML schemas in Visual Studio to provide IntelliSense for MAML topicsSandcastle Help File Builder 1.9.5.0SHFB Visual Studio Extension PackageFor more information about the Visual Studio extension package, see the Visual Studio Package help file topic.

  Read the article

• CodePlex Daily Summary for Thursday, August 07, 2014

  CodePlex Daily Summary for Thursday, August 07, 2014Popular ReleasesSharePoint 2013 Lync Presence using jQuery: jQuery Lync Presence: I have fixed the same user multiple times on page issue in this release (Issue # 1506)Dynamics AX IEIDE Project Explorer: IEIDE.1.1.40803.1: Installing the project: 1. Install the ax model file; do this by running the following commands on the machine having the AX Management Tools: 1.a. cmd (depending if you have UAC enabled, you may want to Run as administrator); 1.b. net stop aos60$01 (wait until you have your AOS stopped); 1.c. cd "c:\Program Files\Microsoft Dynamics AX\60\ManagementUtili ties\" 1.d. axutil import /file:c:\IEIDE.1.1.40806.1.axmodel /verbose 1.e. net start aos60$01 1.f. start the client and select Skip 2. Per...JSLint.NET: JSLint.NET 1.6.4: Bugs: #38: MSBuild task support for linked settings file. #40: Explicitly typed imports / exports required in some Visual Studio environments.AD4 Application Designer for flow based .NET applications: AD4.AppDesigner.23.24: AD4.Iteration.23.24(Advanced Rendering Features) DesignAttribute parameter LabelPosition to define position of flow pin label: AD4_SyntaxDefinition extended by parameter LabelPosition FileExtension extended to parse value of parameter LabelPosition AppDesignAttribute extended by LabelPosition RaiseAlarmFlow of AlarmClockSample.10 extended to test the new attribute RenderFlowChartPinCaptions improved to handle LabelPosition parameter ToDo: Some tutorials are unfinished but coming soon...Instant Beautiful Browsing: IBB 14.3 Alpha: An alpha release of IBB. After 3 years of the last release this version is made from scratch, with tons of new features like: Make your own IBB aps. HTML 5. Better UI. Extreme Windows 8 resemblance. Photos. Store. Movement TONS of times smother compared to previous versions. Remember that this is AN ALPHA release, I hope I will have "IBB 14" finished by December. The documentation on how to create a new application for IBB will come next monthjQuery List DragSort: jQuery List DragSort 0.5.2: Fixed scrollContainer removing deprecated use of $.browser so should now work with latest version of jQuery. Added the ability to return false in dragEnd to revert sort order Project changes Added nuget package for dragsort https://www.nuget.org/packages/dragsort Converted repository from SVN to MercurialForms 7 - A lightweight InfoPath alternative for SharePoint: Forms7 0.0.07 Alpha Release: Minor bug fixes for repeating content functionality and modifications so that Forms7 will work with older versions of Internet ExplorerEASTester: EASTester 1.4: This release has several new features: •You can set proxy server settings. This means you can point it to Fiddler and see more details on the requests and responses. The default is 127.0.0.8 and port 8888 – which is what Fiddler’s proxy defaults to. •There is limited ability for the application to lookup helpful information on the first status code in the response – you will see it displayed in the lowest text box of the Conversation window. This will make the Conversation window a lot easi...Lexisnexis directory of corporate affiliates Text Analyzer: Lexisnexis Text Analyzer: This version has functions below.Standards to analyze, columns, keywords editing Import of document Export to CSV and Microsoft Excel fileWix# (WixSharp) - managed interface for WiX: Release 1.0.0.0: Release 1.0.0.0 Custom UI Custom MSI Dialog Custom CLR Dialog External UIRecaptcha for .NET: Recaptcha for .NET v1.6.0: What's New?Bug fixes Optimized codeMath.NET Numerics: Math.NET Numerics v3.2.0: Linear Algebra: Vector.Map2 (map2 in F#), storage-optimized Linear Algebra: fix RemoveColumn/Row early index bound check (was not strict enough) Statistics: Entropy ~Jeff Mastry Interpolation: use Array.BinarySearch instead of local implementation ~Candy Chiu Resources: fix a corrupted exception message string Portable Build: support .Net 4.0 as well by using profile 328 instead of 344. .Net 3.5: F# extensions now support .Net 3.5 as well .Net 3.5: NuGet package now contains pro...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.11: Virto Commerce Community Edition version 1.11. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes many bug fixes and minor improvements. More details about this release can be found on our blog at http://blog.virtocommerce.com.BoxStarter: Boxstarter 2.4.80: Running the Setup.bat file will install Chocolatey if not present and then install the Boxstarter modules.ProjkyAddin ssms addin script shortcut ssmsaddin: projkyaddin source code and msi files.: projkyaddin source code and msi files.Json.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...VidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.5: *Added Send-Keys function to send a sequence of keys to an application window (Thanks to mmashwani) *Added 3 optimization/stability improvements to Execute-Process following MS best practice (Thanks to mmashwani) *Fixed issue where Execute-MSI did not use value from XML file for uninstall but instead ran all uninstalls silently by default *Fixed error on 1641 exit code (should be a success like 3010) *Fixed issue with error handling in Invoke-SCCMTask *Fixed issue with deferral dates where th...SEToolbox: SEToolbox 01.041.012 Release 1: Added voxel material textures to read in with mods. Fixed missing texture replacements for mods. Fixed rounding issue in raytrace code. Fixed repair issue with corrupt checkpoint file. Fixed issue with updated SE binaries 01.041.012 using new container configuration.Magick.NET: Magick.NET 6.8.9.601: Magick.NET linked with ImageMagick 6.8.9.6 Breaking changes: - Changed arguments for the Map method of MagickImage. - QuantizeSettings uses Riemersma by default.New ProjectsADShop: Project ADShop Categoty : Shop / Bussiness Dev : Andy Nguy?n Create : 7/13/2014 Notes : This source is for students . Don't use for marketing online !Aspose Java for Docx4j: Comparison Between Docx4j And AsposeCode Coverage With Visual Studio: This is going to be Code Coverage Plugin for Visual StudioEuler circuit: Initial releaseLexisnexis directory of corporate affiliates Text Analyzer: The program is made for analyzing documents, Lexisnexis directory of corporate affiliates.Manipulator: It's an HTML tool that provides you some functions. Written in javascript.MicroJSON - Lightweight JSON library: MicroJSON is a lightweight JSON library that provides methods to create and read JSON objects and strings. It is useful for .Net Micro Framework.Ollies MSCRM Tools: Useful tools for your working life with MSCRMOnline: This is a demo appPESS2: nothing particularPrivateScriptLanguage: PSL is a simple Script-Language which can be used for custom shell-development or low-level scripting in applications. You can easily integrate it in any app!QuickDAL: QDAL provides a simple and efficient Data Access Layer between business entities and a T-SQL compatible database.Regular delaunay triangulation: Initial releaseSimpleWebService: This application should provide a simple platform to simulate all kinds of Web-API and/or network services, to provide a good testing environment for developersThe Mario Kart 8 App: Well hello there people! Today I bring to you a new working project for Mario Kart 8 called The Mario Kart 8 App!Visual Studio Online REST API: Visual Studio Online Work Item Tracking REST API sample client written in C#.

  Read the article

• Network print to brother MFC-7420

  - by trampster

  I am trying to pint to a Brother MFC-7420 from my ubuntu 10.04 machine. The brother is attached to a windows XP machine and is shared. This is what I have tried: System-Administration-Printing, Add, Expand Network Printer, Windows Printer via SAMBA, Browse (I can find the printer no problems here), Foward, Choose Driver Dialog, Brother, My printer is not in this list So the next thing I tried was to download the printer driver from here http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_prn.html The driver installed fine but my printer still does not appear in the list. I also tried installing the cups wrapper but that gave the following error. Restarting Common Unix Printing System: cupsd [ OK ] cp: cannot stat `/usr/share/cups/model/MFC7420.ppd': No such file or directory dpkg: error processing cupswrappermfc7420 (--install): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: cupswrappermfc7420 I tried connecting the printer directly but even though I have installed the driver, when I go to printers and click on the printer (it shows up fine as a USB printer) then it say searching for drivers and then gives me a list, this is the same list as before which doesn't have my printer. It really shouldn't be this hard. on window you don't have to installing anything it just works and the same is true for my brothers Mac. How do I print to my printer?

  Read the article

• Weird bug in Visual Studio 11 Beta when running on Windows 8

  - by raccoon_tim

  With the Windows 8 Consumer Preview version out in the open and the Visual Studio 11 Beta also available, I’ve been putting some more effort into trying them both out. The first impression of the new Visual Studio 11 build was: Why doesn’t it work at all on Windows 8?! The issues I encountered were odd to say the least. Visual Studio did install correctly, which was a good sign, but when I started it, I was greeted with a multitude of popups each telling me that some package could not be loaded. So I clicked away for quite some time to finally be greeted by the new default visual style of Visual Studio. The next thing I wanted to do was start a new project so I pressed “New Project” and got the “Microsoft.VisualStudio.Dialogs.DialogInitializationException” exception. After some pondering and even submitting a bug report I found another already reported bug “http://connect.microsoft.com/VisualStudio/feedback/details/727578/vs-do-not-work-with-finnish-number-format-on-w8-64-bit”. It turns out that the dialog initialization failure has something to do with the packages no being loaded and following the presented workaround helped. The trick is to change the negative number sign to “-“ (U+002D) from the additional settings of your regional settings. This issue appears to have a wider reach than just Visual Studio as I heard at TechDays Finland 2012 that the same fix has to be made when using Hyper-V.

  Read the article

• HTG Explains: How Internet Explorer Saves Your Passwords and How to Manage Them

  - by Taylor Gibb

  Privacy is very important when it comes to the digital world, but do you know exactly how your browser saves your passwords ? Read on to find out what goes on behind the scenes. When it comes to web applications, there are many different types of authentication. One of the types is called basic authentication, which is when you navigate to website and a dialog box opens to ask for a username and password. This also happens to be the authentication mechanism defined in the RFC for HTTP. You can see in the screen shot above that there is a check box that you can use to remember your credentials, but what does that do ? You might also ask yourself what happens if you are not using Basic authentication. There is another type of authentication called Form authentication, this is when the authentication is built right into the web application, like the How-To Geek website. This allows the Developer to control the look and feel of the form that we use to log in. How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• CodePlex Daily Summary for Thursday, May 22, 2014

  CodePlex Daily Summary for Thursday, May 22, 2014Popular ReleasesTerraMap (Terraria World Map Viewer): TerraMap 1.0.5: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors. Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed installer not uninstalling older versions T...MDX Parser,Builder,DOM and OLAP visual controls with Writeback for Silverlight: Ranet.UILibrary.Olap-2.5.434.0: Issue hot fixed: 102.127666 - Incorrectly formed command EXCEPT () in MDX query for the exclusion of several elements among of the subordinates 102.132877 - Incorrectly generate MDX query with using VisualTotals, the function HIERARCHIZE - should be inside 102.132887 - If in the MemberChoice select an item with child, and then delete one of the child, the parent misses the result build the test project (...\Users\Public\Documents\Ranet.UILibrary.Olap-2.5 Samples\UILibrary.Olap\Cs\Ranet...R.NET: R.NET 1.5.13: R.NET 1.5.13 is a beta release towards R.NET 1.6. You are encouraged to use it now and give feedback. See the documentation for setup and usage instructions. Main changes for R.NET 1.5.13 Changed the nuget packaging to distribute via nuget.org at R.NET Community and R.NET FSharp Utility. Without entering into details, this was necessary to facilitate the distribution of the packages. You are strongly encouraged to use nuget to manage the dependency of your work on R.NET, rather than the bin...Adaptive Access Layers: AAL 2.0: Major rework with breaking changes. Much more flexible registration of implementation strategy and support for methods, properties and events.Google Analytics SDK for Windows 8 and Windows Phone: Google Analytics SDK 1.2.08: Recommended for Xaml/C# developers: Download the package through NuGet. Recommended for JS and C++ developers: Download the new native vsix (Visual Studio SDK) package above. NEW FEATURES & FIXESSee the full list of changes since the last public release SHOUT OUTSDacianMujdar for the pull request to add support for campaigns. aclassen for the pull request to add support for resolved phone models in the WP7 & 8 Silverlight versions. Alan Mendelevich for great open source library PhoneNam...DbSharp: DbSharpApplication (Binary files): A zip file that include DbSharpApplication.exe. Initial release.Multiwfn: Multiwfn 3.3.3: Multiwfn 3.3.3WebExtras: v1.4.0-Beta-1: Enh: Adding support for jQuery UI framework Enh: Adding support for jqPlot charting library Dropping dependency on MoreLinq library Note: Html.LabelForV2(...) extension method has now been deprecated. You should use Html.RequiredFieldLabelFor(...) extension method instead. This extension method will be removed in future versions.????: 《????》: 《????》（c???）??“????”???????，???????????????C?????????。???????,???????????????????????. ??????????????????????????????????；????????????????????????????。MISAO: Ver. 5.4: Fix bugs (Nicovideo viwer add-in) Add Masakari option (Nicovideo viwer add-in)QuickMon: Version 3.11: This release adds some major changes to the core monitoring engine. 1. Polling overrides: Each collector entry can specify a minimum time updating is allowed for it and dependent collector entries. 2. Polling frequency sliding: Additional to polling overrides a collector entry can specify 'sliding' polling frequency if the state remains the same. This means the frequency slows down reducing overhead of polling on a stagnant resource. 3. The monitor pack has an overriding frequency. If used...Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.WordMat: WordMat v. 1.06: Check WordMat.blogspot.com for a complete description of new features.Wsus Package Publisher: Release v1.3.1405.17: Add Russian translation (thanks to VSharmanov) Fix a bug that make WPP to crash if the user click on "Connect/Reload" while the Report Tab is loading. Enhance the way WPP store the password for remote computers command.MoreTerra (Terraria World Viewer): More Terra 1.12.9: =========== = Compatibility = =========== Updated to account for new format 1.2.4.1 =========== = Issues = =========== all items have not been added. Some colors for new tiles may be off. I wanted to get this out so people have a usable program.LINQ to Twitter: LINQ to Twitter v3.0.3: Supports .NET 4.5x, Windows Phone 8.x, Windows 8.x, Windows Azure, Xamarin.Android, and Xamarin.iOS. New features include Status/Lookup, Mute APIs, and bug fixes. 100% Twitter API v1.1 coverage, Async, Portable Class Library (PCL).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.26.0: Added access to the Release Notes during 'Check for Updates...'' Debug panels Added support for generic types members Members are grouped into 'Raw View' and 'Non-Public members' categories Implemented dedicated (array-like) view for Lists and Dictionaries http://download-codeplex.sec.s-msft.com/Download?ProjectName=csscriptnpp&DownloadId=846498ClosedXML - The easy way to OpenXML: ClosedXML 0.70.0: A lot of fixes. See history.SFDL.NET: SFDL.NET (2.2.9.2): Changelog: Neues Icon Xup.in CnL Plugin BugfixSEToolbox: SEToolbox 01.030.008 Release 1: Fixed cube editor failing to apply color to cubes. Added to cube editor, replace cube dialog, and Build Percent dialog. Corrected for hidden asteroid ore, allowing rare ore to show when importing an asteroid, or converting a 3d model to an asteroid (still appears to be limitations on rare ore in small asteroids). Allowed ore selection to Asteroid file import. (Can copy/import and convert existing asteroid to another ore). Added progress bars to common long running operations. Fixed ...New Projects<a href="jAvAsCrIpT&colon;alert&lpar;69&rpar;">CLICK HERE TO GET FREE MONEY</a>: <a href="jAvAsCrIpT&colon;alert&lpar;69&rpar;">CLICK HERE TO GET FREE MONEY</a> canopyazure: canopyazureCI&T ULS Log Viewer: Ferramenta para ajudar o desenvolvedor Sharepoint analisar os arquivos de log.EmissorCTE: E uma DLL que ira enviar, receber e cancelar o CTE, também ira fazer geração do DACTEF5 BIG-IP Local Traffic Manager: A .NET wrapper for F5 iControl service-enabled management API.Hydrodesktop Excel-Addin: HydroDesktop ExcelPage Manifest Extractor: Extract a Sharepoint Page Manifest/XMLProject Euler Solutions By multiple1902: Project Euler Solutions in FSharp. By Weisi Dai (multiple1902) <weisi@x-research.com>VerySimpleBackup: Simple command line tool for backup any directory (using Volume Shadow Copy), using archiving (ZIP) with optional password and copy it to FTP (cycle supported).Waf Music Manager: The Waf Music Manager is a simple and fast application that makes fun to manage the local music collection.?????-?????【??】?????????: ??????????????????,???,??????????、???????????????????。??????,????、????，??????！ ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】?????????: ???????????????????????,????,????“???、???、???”?????,?????,?????????????????。??????！ ?????-?????【??】?????????: ??????、??????????????????,???????.??????????,????????。 ?????-?????【??】?????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ??????、??????????????????,???????.??????????,????????。 ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ??????-??????【??】??????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ??????-??????【??】??????????: ???????????????:??????!?????!???:????、????、????、????。??,??????????!??????. ?????-?????【??】?????????: ???????????????,??????,??????,??????、??????,??????、??，????，??????！ ?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】?????????: ?????1992?,????????????????。??????????????????????。????????????,????，????????！ ?????-?????【??】?????????: ???????????????????????,???????????,??????,??????????????...????????。??????！

  Read the article

• What will be the better way for data retrieval on application that needs to handle limited amount of data?

  - by Milanix

  Just moved this question from Stack Overflow. Since, adding my code snippets itself would make this question really long. Instead, I am pretty interested in knowing a better ways for data retrieval on application that needs to handle limited amount of data which isn't updated regularly. Let's take this example: I am writing an application which gets a schedule as an XML from server. I have written a logic in order to parse XML version and update database only if the version is newer than the local version. Although the update is checked automatically/manually on daily basis based on user preference, the actual version update happens only once per few months or so. Since, this is done by some other authority which doesn't provide API but, rather inform publicly on their changes. The actual XML contains a "(n number of groups)(days in a week) (n number of schedule)" . The group is usually 6 and the number of schedule is usually 2. So basically there would usually be only around 100 strings. Now although I have used SQLite at the moment. I want to know how to make update on database. Should I show progress dialog that the application is updating and exit the app when it's done? Since, my updates are infrequent i don't think this will really harm user experience but, is there any better ways to do it? Because I don't want update to be made when user is searching which is done using database. This will cause an database already open exception. At least I have faced this problem before. Is it better to rather parse XML every time when user wants to view certain things or to use SQLite? Since, I make lots of use of adapter in my app to create lists, will that degrade the performance?

  Read the article

• Have Windows Automatically Login Without Entering Your Password

  - by deadlydog

  If you are like me and don't want to have to enter your password each time Windows loads, you can have Windows start up without prompting you to enter a user name or password.  The simple (and BAD) way to do this is to simply not have a password on your user account, but that’s a big security risk and will allow people to easily remote desktop into your computer. So, first set a password on your windows account if you don’t already have one.  Then select Run... from the start menu (or use Windows Key + R to open the Run window) and type control userpasswords2, which will open the user accounts application.   On the Users tab, clear the box for Users must enter a user name and password to use this computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use to automatically log into Windows.  That's it.    You may also want to make sure your screen saver is not set to prompt you for a password when it exits either. Now your computer is secure without getting in your way.

  Read the article

• How to shutdown Windows 8 PC without using mouse?

  - by Gopinath

  Windows 8 sports a re-imagined desktop and tablet user interface with touch friendly Metro looks. One of the major changes in Windows 8 for a common users  is the lack of start menu, with which we got friended for more than a decade. On Windows 8 we would be missing it. As there is no start menu in Windows 8, the way you shutdown a Windows 8 computer is a bit different. To shutdown using Mouse, you need to hover on the top right edge of the screen to open the hidden menu,  go to "Settings"  tab -> "Power" -> Then choose for "Shut down", "Sleep" or "Restart".  That’s a lot of Mouse movement work and if you are a power user then you may not like to do that. How about shutting down the PC using Keyboard? Here are the two ways to shutdown the PC using keyboard Keyboard shortcuts With the help of keyboard shortcuts you can navigate to Power options of Windows 8. Press Win + C to bring the Settings Charm and use Arrows and Enter keys to navigate to access Shutdown menu. This is one of the easiest way to shutdown the PC without using Mouse. Run Command If you don’t like to go through the Setting menu, you can use the traditional Run commands. Press Win + R to open Run dialog and enter the command shutdown -s -t 0 to immediately shutdown the PC.

  Read the article

• Issue with image lightbox and enlargement / Jquery Mobile

  - by Matt

  I'm working on a redesign of my weather website using Jquery Mobile. I have it set up so that you drill down through a series of content containers to get to the weather info (each group of info opens in a dialog display). Everything's worked well, but I've run into an issue with my images. I have them sized so that they fit a mobile device's screen nicely, but because of that, when you look at them in a desktop browser, you can't really make out what the image is. I've tried several image lightbox / enlargement solutions, but for some reason, none of them have worked. Either nothing happens or the images open in a new window. I thought that this might be caused by Jquery Mobile somehow overwriting the scripts and css of the lightbox / enlargements I've tried. I'm not completely sure though that this is the case, and if it is, how I can get around it to be able to enlarge the images to their original size, preferably onclick. Here is a working (for the most part - still some kinks to work out) example. If you look under the "Tropical" section at the "Satellite-Derived Products", you'll see what I mean. http://www.suncoaststormwatch.com/Beta/Index.html

  Read the article

• CodePlex Daily Summary for Sunday, October 28, 2012

  CodePlex Daily Summary for Sunday, October 28, 2012Popular ReleasesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536Orchard Project: Orchard 1.6: Please read our release notes for Orchard 1.6: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.ZXMAK2: Version 2.6.7.0: - small performance improvements - fix & improvements for Direct3D renderer (thanks to zebest for testing)Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...MCEBuddy 2.x: MCEBuddy 2.3.5: Changelog for 2.3.5 (32bit and 64bit) 1. Fixed a bug causing MCEBuddy to crash during or after installation on Windows XP 2. Bugfix for resource leak with UPnP which would lead to a failure after many days 3. Increased the UPnP discovery re-scan interval from 10 minutes to 30 minutes 4. Added support for specifying TVDB and IMDB id’s in the conversion task page (forcing the internet lookup for metadata)CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1025.5): [NEW] Support for connecting to CRM Online via Office 365 (OSDP) [NEW] Current connection information and loaded ribbon name are displayed in the status bar [IMPROVED] Connect dialog minor improvements and error message descriptions [IMPROVED] Connecting to a CRM server will close currently loaded ribbon upon confirmation (if another ribbon was loaded previously) [FIX] Fixed bug in Open Ribbon dialog which would not allow to refresh entity list more than onceReadable Passphrase Generator: KeePass Plugin 0.8.0: Changes: Interrogative phrases (questions) like why did the statesman burgle amidst lucid sunlamps Support transitive / intransitive verbs (whether a verb needs a subject or not). Change adverbs to be either before or after the verb, at random. Add an "equal" version of each strength, where each possibility is equally likely (for password purists). 3401 words in the default dictionary (~400 more than previous release) Fixed bugs when choosing verb tenseseWay payment gateway provider for NB_Store: NB_Store_Gateway_eWay: Install package for eWAY gateway for NB_Store.fastJSON: v2.0.9: - added support for root level DataSet and DataTable deserialize (you have to do ToObject<DataSet>(...) ) - added dataset testsMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.72: Fix for Issue #18819 - bad optimization of return/assign operator.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.390: Version 2.5.0.390 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Fix recent file list remove issue. WAF: Minor code improvements. BookLibrary: Fix Blend design time support o...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...New ProjectsAnalytics for Windows 8: SIlverlight / WPF User control integrated in WPF / SILVERLIGHT / WINDOWS PHONE Apps in order to collect user data ( Action , Timespan etc ) . bGui - User Interfaces in Batch: A small project for allowing basic user interface creation in batch. Still under strict development, see documentation for current functionality.Blog Projects: Projects wich i use in my blog postsCloud Sync Service: This Windows Service lets you sync your files across other machines by using Cloud File Storage as gateway. Amazon S3 and Windows Azure supported.CocoaVP8: CocoaVP8 is a dual-licensed commercial/GPL native library which allows Mac and iOS applications to easily use the VP8 video codec.DarkSky Orchard Microdata: Microdata is an Orchard module that exposes a MicrodataPart that will render microdata for your content items.Gerenciador Paroquial: Um conjunto de ferramentas desenvolvido para auxiliar a administração de comunidades eclesiásticas episcopais.Quick Launch: Quick Launch - a New Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsRDI Alef: RDI ALEF (ALef Entities Framework) é uma biblioteca desenvolvida em C# para persistência de objetos em um banco de dados. Encapsula um manipulador SQL e o funciSend multiple SMS via Way2SMS C#: Way2SMS, 160BY2, SMS, INDIATrending: Trending program; calculates the highest and lowest changes in frequency of specific words in two files.

  Read the article

• hd0 out of disk error results to low graphics mode

  - by msPeachy

  Yesterday, I have reinstalled Ubuntu due to a error: hd0 out of disk on boot. Everything went fine, I've installed apps, perform updates and upgraded the kernel. I've even restarted it a few times just to check if I would encounter boot issues and was glad that everything was working perfectly, then powered it down. The next morning when I boot, I got this error: hd0 out of disk error. Press any key to continue... again! After pressing a key, it took 10 minutes for the Ubuntu logo to appear with it's 5 dots. After another 5 minutes, Ubuntu started checking the disk and displayed a message that / has errors, I pressed F to fix the errors. After which Ubuntu tells me that /tmp is not yet ready for mounting so I pressed S to skip mounting it, then Ubuntu restarted. On boot I saw the error: hd0 out of disk error. Press any key to continue... again. This time it took only a minute for the Ubuntu logo to appear and after another minute a dialog box appeared with the following message: The system is running in low-graphics mode. Your screen, graphics card, and input settings could not be detected correctly. You will have to configure these yourself. What would you like to do? Run in low-graphics mode for just one session Reconfigure graphics Troubleshoot the error Exit to console login Whichever option I choose I ended up with a console prompt: grub-editenv: error: cannot read the file /boot/grub/grubenv. _ I can't do anything on this console, whatever I type nothing happens. I've rebooted several times and I get same error every time. I don't quite understand what is wrong with Ubuntu or with my installation. I've encountered this hd0 out of disk error several times already and always ended up reinstalling. I'd really really appreciate it if you guys can help me fix this. Thank you and good day.

  Read the article

• Messaging with KnockoutJs

  - by Aligned

  MVVM Light has Messaging that helps keep View Models decoupled, isolated, and keep the separation of concerns, while allowing them to communicate with each other. This is a very helpful feature. One View Model can send off a message and if anyone is listening for it, they will react, otherwise nothing will happen. I now want to do the same with KnockoutJs View Models. Here are some links on how to do this: http://stackoverflow.com/questions/9892124/whats-the-best-way-of-linking-synchronising-view-models-in-knockout http://www.knockmeout.net/2012/05/using-ko-native-pubsub.html ~ this is a great article describing the ko.subscribable type. http://jsfiddle.net/rniemeyer/z7KgM/ ~ shows how to do the subscription https://github.com/rniemeyer/knockout-postbox will be used to help with the PubSub (described in the blog post above) through the Nuget package. http://jsfiddle.net/rniemeyer/mg3hj/ of knockout-postbox   Implementation: Use syncWith for two-way synchronization. MainVM: self.selectedElement= ko.observable().syncWith (“selectedElement”); ElementListComponentVM example: self.selectedElement= ko.observable().syncWith(“selectedElement”); ko.selectedElement.subscribe(function(){ // do something with the seletion change }); ElementVMTwo: self.selectedElement= ko.observable().syncWith (“selectedElement”); // subscribe example ko.postbox.subscribe(“changeMessage”, function(newValue){ }); // or use subscribeTo this.visible = ko.observable().subscribeTo("section", function(newValue) { // do something here }); · Use ko.toJS to avoid both sides having the same reference (see the blog post). · unsubscribeFrom should be called when the dialog is hidden or closed · Use publishOn to automatically send out messages when an observable changes o ko.observable().publishOn(“section”);

  Read the article

• How to turn off screen (DPMS) together with locking session in KDE?

  - by gertvdijk

  First of all, I'm aware a similar question for GNOME is asked here: "Switch off laptop backlight when locking screen". Objective I would like to turn off my screen on locking the session for power saving reasons. Actual problem Locking the screen on Kubuntu (KDE) inevitably triggers the screensaver as far as I can see. There's no screensaver option other than 'Blank screen' together with its background colour set to black that comes just close to my goal. It blanks the screen, but doesn't turn off the screen. Screen's backlight will still be on and not saving any power. Current workaround A workaround via a script + shortcut key is possible, however, it's just a workaround since it doesn't trigger on all ways to lock the session. Therefore, I think it should be possible to have it done more elegantly, for example by providing this option in KDE's configuration dialog of the screensaver. The workaround I am now using is the following. A script that locks the screen and turns off the screen: #!/bin/bash qdbus org.freedesktop.ScreenSaver /ScreenSaver Lock xset dpms force standby and let it run with a shortcut key via a custom menu entry. It works. Here's why I consider it to be a workaround rather than a solution. It doesn't work for other ways to trigger the locking of the session. My actual question(s) Do I need to touching/patching KDE's source? If not what are my options? If so, could someone point me to where I can get started? what do you think is the recommended place in the GUI for configuration? I'm using Kubuntu 12.04 and willing to upgrade to KDE 4.9 or waiting for the 12.10 release.

  Read the article

• New to emacs -- my key bindings are different from what is described in the tutorials. How to fix this?

  - by MountainX

  I'm using emacs v24 [GNU Emacs 24.0.94.1 (x86_64-pc-linux-gnu, GTK+ Version 3.3.20) of 2012-03-26 on meitnerium, modified by Debian] on Kubuntu 12.04. My basic problem is that emacs is not behaving the same as the tutorials I'm reading. I either need different tutorials or I need to make my emacs work as described in the tutorials. Being new to emacs and KDE, I don't know where to start because of this incongruence. My specific problem is this: When I shift-left-mouse-click, I get a buffer dialog popup. That differs from my understanding of the documenation: shift mouse-1 Draws lines, rectangles or poly-lines, erases, cuts, copies or pastes. I also want to use CUA mode. The CUA mode documents seem to indicate that shift-left-mouse-click produces: rectangle highlighting by dragging the mouse while holding down the shift key. I don't get that result either. In fact, I can't select using any modifier keys together with a drag action. Maybe this is a KDE issue. I don't know.

  Read the article

• GTK app: How do I create a working indicator with Qt/C++?

  - by hakermania

  I've tried in 2 forums, but I had no luck so far. So, I am using Qt IDE in order to build my application so as to participate to the Ubuntu Showdown contest. In my application, I've done the following: void show_app(MainWindow *data) { //this works fine: app_indicator_set_status(appindicator, APP_INDICATOR_STATUS_PASSIVE); //this crashes the application: data->show(); } void MainWindow::make_indicator() { if(appindicator){ //appindicator has already been created return; } appindicator = app_indicator_new("Format Junkie Indicator", "formatjunkie", APP_INDICATOR_CATEGORY_APPLICATION_STATUS); GtkWidget* showapp_option; GtkWidget* indicatormenu = gtk_menu_new(); GtkWidget* item = gtk_menu_item_new_with_label("Format Junkie main menu"); gtk_menu_item_set_submenu(GTK_MENU_ITEM(item), indicatormenu); showapp_option = gtk_menu_item_new_with_label("Show App!"); g_signal_connect(showapp_option, "activate", G_CALLBACK(show_app), this); gtk_menu_shell_append(GTK_MENU_SHELL(indicatormenu), showapp_option); gtk_widget_show_all(indicatormenu); app_indicator_set_status(appindicator, APP_INDICATOR_STATUS_ACTIVE); app_indicator_set_attention_icon(appindicator, "dialog-warning"); app_indicator_set_menu(appindicator, GTK_MENU (indicatormenu)); } So, basically I am trying to make a simple indicator entry, which, on click, it will hide the indicator and display the application. The indicator can be successfully hidden using the PASSIVE thingy over there, but, during the call data-show();, the application crashes. Any help on what I am doing wrong would be appreciated! Also, please help me to correct this problem I'm facing (alternatively, I will migrate to the old and good tray icon (it works fine in 12.04, anyway) which I can handle very easily and efficiently)

  Read the article

• FREE three days of online SharePoint 2010 development training for UK software houses Feb 9th to 11th

  - by Eric Nelson

  I have been working to get a SharePoint development course delivered online in February and March – online means lots of opportunities to ask questions. The first dates are now in place. The training is being delivered as a benefit for companies signed up to Microsoft Platform Ready. It is intended for UK based companies who develop software products* Agenda: Day 1 (Live Meeting 3 hours) 1:30 - 4:30 •         Getting Started with SharePoint: Understand why and how to start developing for SharePoint 2010 •         SharePoint 2010 Developer Roadmap:  Explore the new capabilities and features •         UI Enhancements: How to take advantage of the many UI enhancements including the fluent UI ribbon and  extensible dialog system. Day 2 (Live Meeting 3 hours) 1:30 - 4:30 •         Visual Studio 2010 Tools for SharePoint 2010: Overview of the project and item templates and a walkthrough of the designers •         Sandboxed Solutions: The new deployment model can help mitigate the risk of deploying custom code   •         LINQ to SharePoint:  SharePoint now fully supports LINQ for querying lists Day 3 (Live Meeting 3 hours) 1:30 - 4:30 •         Client Object Model: The Client OM can be accessed via web services, via a client (JavaScript) API, and via REST •         Accessing External Data: Business Connectivity Services (BCS) enables integration with back end systems •         Workflow: A powerful mechanism to create functionality using Windows Workflow Foundation Register for FREE (and tell your colleagues – we have a pretty decent capacity) To take advantage of this you need to: Sign your company up to Microsoft Platform Ready and record your SharePoint interest against one of your companies products Read about Microsoft Platform Ready Navigate to the “Get Technical Benefits” tab for SharePoint and click on Register Today You will then ultimately get an email with details of the Live Meeting to join on the 9th. But you should also favourite the team blog for any last minute details * Such companies are often referred to as an Independent Software Vendors. My team is focused on companies that create products used by many other companies or individuals. That could be a packaged product you can buy "off the shelf" or a Web Site offering a service - the definition is actually pretty wide these days :-) What it does not include is a company building software which will only be used by its own people.

  Read the article

• Can't configure 5.1 audio with 12.04

  - by xster

  I have an Intel ALC892 and a Nvidia GT 520m connected to speakers via HDMI. On lspci, I see 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ZOTAC International (MCO) Ltd. Device a218 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at db400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel 02:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 2180 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at db080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel My alsamixer looks like I enabled pulseaudio configuration file to have 6 channels. My sound setting looks like When I use the test dialog, only front left and right have sounds. If I use alsa in XBMC on a 5.1 video, there's no sound. If I use pulseaudio, only front right and left have sound. I can barely hear any speech since I'm guessing it's mapped to front center. Any clues?

  Read the article

• TechEd 2012: MVVM In XAML

  - by Tim Murphy

  Paul Sheriff was a real character at the start of his MVVM in XAML session.  There was a lot of sarcasm and self deprecation going on prior to the .  That is never a bad way to get things rolling right after lunch.  Then things got semi-serious. The presentation itself had a number of surprises, but not all of them had to do with XAML.  When he flipped over his company’s code generation tool it took me off guard.  I am used to generator that create code for a whole project, but his tools were able to create different types of constructs on demand.  It also made it easier to follow what he was doing than some of the other demos I have seen this week where people were using code snippets. Getting to the heart of the topic I found myself thinking that I may have found my utopia for application development in MVVM.  Yes, I know there is no such thing, but this comes closer than any other pattern I have learned about.  This pattern allows the application to have better separation of concerns than I have seen before.  This is especially true since you can leverage data binding.  I’m not sure why it has taken me so long to find time for this subject. As Paul demonstrated using this pattern with XAML gives you multi-platform reusable code when you leverage common utility classes and ModelView classes.  The one drawback I see is that you have to go to the lowest common denominator between the platforms you want to support, but you always have to weigh the trade offs. And finally, the Visual Studio nuggets just keep coming.  Even though it has been available for several generations of Visual Studio I have never seen someone use linked files within a solution.  It just goes to show that I should spend more time exploring the deeper features of each dialog. del.icio.us Tags: TechEd,TechEd 2012,MVVM,Paul Sheriff,Patterns,Visual Studio 2012

  Read the article

• SharePoint: UI for ordering list items

  - by svdoever

  SharePoint list items have in the the base Item template a field named Order. This field is not shown by default. SharePoint 2007, 2010 and 2013 have a possibility to specify the order in a UI, using the _layouts page: {SiteUrl}/_layouts/Reorder.aspx?List={ListId} In SharePoint 2010 and 2013 it is possible to add a custom action to a list. It is possible to add a custom action to order list items as follows (SharePoint 2010 description): Open SharePoint Designer 2010 Navigate to a list Select Custom Actions > List Item Menu Fill in the dialog box: Open List Settings > Advanced Settings > Content Types, and set Allow management of content types to No  On List Settings select Column Ordering This results in the following UI in the browser: Selecting the custom Order Items action (under List Tools > Items) results in: You can change your custom action in SharePoint designer. On the list screen in the bottom right corner you can find the custom action: We now need to modify the view to include the order by adding the Order field to the view, and sorting on the Order field. Problem is that the Order field is hidden. It is possible to modify the schema of the Order field to set the Hidden attribute to FALSE. If we don’t want to write code to do it and still get the required result it is also possible to modify the view through SharePoint Designer: Modify the code of the view: This results in: Note that if you change the view through the web UI these changes are partly lost. If this is a problem modify the Order field schema for the list.

  Read the article

• Access Control Service: Programmatically Accessing Identity Provider Information and Redirect URLs

  - by Your DisplayName here!

  In my last post I showed you that different redirect URLs trigger different response behaviors in ACS. Where did I actually get these URLs from? The answer is simple – I asked ACS ;) ACS publishes a JSON encoded feed that contains information about all registered identity providers, their display names, logos and URLs. With that information you can easily write a discovery client which, at the very heart, does this: public void GetAsync(string protocol) {     var url = string.Format( "https://{0}.{1}/v2/metadata/IdentityProviders.js?protocol={2}&realm={3}&version=1.0",         AcsNamespace,         "accesscontrol.windows.net",         protocol,         Realm);     _client.DownloadStringAsync(new Uri(url)); } The protocol can be one of these two values: wsfederation or javascriptnotify. Based on that value, the returned JSON will contain the URLs for either the redirect or notify method. Now with the help of some JSON serializer you can turn that information into CLR objects and display them in some sort of selection dialog. The next post will have a demo and source code.

  Read the article

• Game engine lib and editor

  - by luke

  I would like to know the best way/best practice to handle the following situation. Suppose the project you are working on is split in two sub-projects: game engine lib editor gui. Now, you have a method bool Method( const MethodParams &params ) that will be called during game-level initialization. So it is a method belonging to the game engine lib. Now, the parameters of this method, passed as a reference the structure MethodParams can be decided via the editor, in the level design phase. Suppose the structure is the following: enum Enum1 { E1_VAL1, E1_VAL2, }; enum Enum2 { E2_VAL1, E2_VAL2, E2_VAL3, }; struct MethodParams { float value; Enum1 e1; Enum2 e2; // some other member } The editor should present a dialog that will let the user set the MethodParams struct. A text control for the field value. Furthermore, the editor needs to let the user set the fields e1 and e2 using, for example, two combo boxes (a combo box is a window control that has a list of choices). Obviously, every enum should be mapped to a string, so the user can make an informed selection (i have used E1_VAL1 etc.., but normally the enum would be more meaningful). One could even want to map every enum to a string more informative (E1_VAL1 to "Image union algorithm", E1_VAL2 to "Image intersection algorithm" and so on...). The editor will include all the relevant game egine lib files (.h etc...), but this mapping is not automatic and i am confused on how to handle it in a way that, if in future i add E1_VAL3 and E1_VAL4, the code change will be minimal.

  Read the article

• Dropbox fails to install on Ubuntu 13.10

  - by Fraxav

  I've done some research and it seems Dropbox has some problems with the status icon on Ubuntu 13.10, but I can't even manage to install it. The very first time, I installed nautilus-dropbox from the app center on a freshly installed Saucy, but I couldn't see the status icon and clicking the app icon wouldn't help, so I uninstalled and rebooted. The second and third time, the app just freezed at about 75% while installing from app manager, so I had to shut down the computer and uninstall. Next I tried to install dropbox from the .deb (from website): it installed (the launcher?) from app manager, then the dialog prompted me to start dropbox and finally to download the official daemon, but the download freezed at 0% and made everything else buggy/laggy (probably also because I restarted nautilus, as required, at that point). After a purge and clean from terminal, some icons and this file (which I suspect is somehow responsible, but of course is locked) are still present on my computer. Can anyone help me figure how how to install it? How could I remove that configuration file so I can give it a last shot?

  Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >