Search Results

Search found 4690 results on 188 pages for 'ran'.

Page 128/188 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• Proper DNS records for handling subdomains and missing subdomains

  - by Cerin

  I'm trying to craft DNS records to support: Explicitly defined subdomains, e.g. ftp.mydomain.com A missing subdomain that redirects to www. Implicitly defined subdomains, e.g. <some user entered value>.mydomain.com For 1, I'm using CNAME records. All seems to be working well. For 2, I'm using an A record, @ -> 123.456.789.012. Worked well. For 3, I ran into some trouble. I tried adding another A record, * -> 123.456.789.012. This appeared to work initially, but it broke #2. i.e. now browsing to mydomain.com doesn't redirect to www.mydomain.com. I tried adding the CNAME record @ -> 123.456.789.012, but my DNS admin tool won't accept it because it's saying the @ is already in use, even though I deleted the A record using it. Am I configuring this incorrectly? What am I doing wrong?

  Read the article

• How to install Predis

  - by user782860

  I am trying to install Predis, but keep getting a 500 Server errror. Here is what I have done. 1.) Have apache and php installed on Ubuntu Natty. 2.) Used the instructions on this page http://redis.io/download to download Redis. 3.) Ran the following example to confirm that Redis is working: $ src/redis-cli redis> set foo bar OK redis> get foo "bar" 4.) Have a local website at /home/user/Dropbox/documents/www/mywebsite.com/index.php and have confirmed that php is working. 5.) Downloaded the .zip version of Predis ( https://github.com/nrk/predis Version: v0.6.6-PHP5.2 ), and unzipped the contents to /home/user/Dropbox/documents/www/mywebsite.com/. So now Predis is here: /home/user/Dropbox/documents/www/mywebsite.com/nrk-predis-3bf1230/ 6.) Opened the /home/user/Dropbox/documents/www/mywebsite.com/index.php page. Here is its contents: <? define("PREDIS_BASE_PATH", "nrk-predis-3bf1230/lib/"); spl_autoload_register(function($class) { $file = PREDIS_BASE_PATH.strtr($class, '\\', '/').'.php'; if (file_exists($file)) { require $file; return true; } }); $redis = new Predis_Client(); $redis->set('foo', 'bar'); $value = $redis->get('foo'); ?> I have tried changing: $redis = new Predis_Client(); to: $redis = new Predis\Client(); Have tried changing the the PREDIS_BASE_PATH to: /nrk-predis-3bf1230/lib /home/user/Dropbox/documents/www/mywebsite.com/nrk-predis-3bf1230/lib/ /home/user/Dropbox/documents/www/mywebsite.com/nrk-predis-3bf1230/lib Have done a chmod +x on both: /home/user/Dropbox/documents/www/mywebsite.com/nrk-predis-3bf1230/ /home/user/Dropbox/documents/www/mywebsite.com And doing all of the above always results in a 500 server error. What am I doing wrong?

  Read the article

• why does my computer crash?

  - by chobo2

  Hi my computer keeps crashing and I don't know why. At first I thought because I had my cpu over clocked that it all of sudden was crashing. So I set my cpu back to regular speed. This did not help. I then thought it was because 2 sticks of my memory where from a computer that suffered from a power surge. However I just ran the windows memory diagnostic tool( extended) and after like 6 hours of testing my memory it found no errors. So now the only thing that is left is windows 7 64bit. I first over clocked my cpu for a couple months while running XP. Never had a problem. I installed the memory and windows 7 at the same time. But I not sure if it is my memory now since it passed the diagnostic tests. However I am not sure if it is windows 7 either has I installed it twice in the last year. I really don't want to go back to XP to find out if this is the case. So here are my blue screens of deaths(from bluescreen). https://sites.google.com/site/myerrorswin7/errors (I hope you enjoy my great site lol) As you can see most of them are different NTFS_FILE_SYSTEM KMODE_EXCEPTION_NOT_HANDLED BAD_POOL_HEADER IRQL_NOT_LESS_OR_EQUAL SYSTEM_THREAD_EXCEPTION_NOT_HANDLED SYSTEM_SERVICE_EXCEPTION

  Read the article

• Did chkdsk make it harder to restore files?

  - by neyl

  My friend asked me to try and fix his loaded Sansa Clip + which wasn't playing. After opening it in MSC mode I discovered that the Music directory was empty and total of all files was only a few MB. However Disk properties showed me that it was 7Gb full. I then ran Tools - Error Checking and Windows dutifully informed me that disk was corrupt and I should run again Allowing Windows to Fix Errors. I did that and it told me everything was fixed and that all files were placed in FOUND.000 Dir. FOUND.000 was about 7.5 GB with FILE0000-1546 . CHK. (I am aware of methods like ChkBack to scan and convert to mp3 etc BUT Original filenames and structure needed!) Now I started getting worried that I made things worse! I have plenty of experience with Data Recovery Programs - Recuva, Restore My Files etc. and I was anyhow planning to use them to scan the drive. But NOW after CHKDSK "fixed" the drive maybe it modified critical FAT information vital for data recovery. So I run these programs and 0!!!. No trace of files! I tried a ton of Recovery Programs with same results TILL EaseUS Data Recovery Wizard found all files and I purchased program for $55! My Question In your opinion - did running CHKDSK with automatic fixing of errors make matters worse (i.e. many data recovery progs. didn't find a trace and they would have done if not for chkdsk) or was the filesystem too corrupt anyhow for regular File Recovery Progs.? If I would be a Professional - would I be responsible for running CHKDSK - automatic Fixing. Do you know of a better Data Recovery Program than EaseUs Data Recovery wizard - According to my experience I haven't found better!? Thanks

  Read the article

• There are currently no logon servers available

  - by Ian Robinson

  I am running a Windows 7 laptop that is joined to my company's domain. When I installed Windows 7, I created an account for myself, joined to the domain, and it had been working quite well even though I'm physically remote most of the time, and not actually on the network. However, today I created a new local user account (non-admin) for my little brother. While he was using it, he decided he wanted to install a program, because his account is not an admin, he was prompted to enter Administrator credentials to allow the program to make changes to his computer. I entered my credentials, and this is the first time I ran into the error message: There are currently no logon servers available to service the logon request. I tried logging off and loggin back in, rebooting, etc etc, and no matter what, every time I try to authenticate as my "normal" domain account - I get that message. I can no longer access my computer as an administrator. I no longer know how to log in to my machine using any other account aside from my little brother's non-admin account. I don't have any other local accounts created, and the default local admin account was never enabled. I'd appreciate any ideas on how I can recover access to my account. Let me know if I can provide any more information. FYI - This is a similar question but not sure any of the answers help me in my case. http://serverfault.com/questions/71632/there-are-currently-no-logon-servers-available-to-service-the-logon-request

  Read the article

• Windows 7 Explorer keeps crashing

  - by Daniel Liang

  I currently have an issue with Windows Explorer. It keeps crashing when I browse through a network drive. This is happening on several computers. I have already obtained a crash dump file but it doesn't state much: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\LocalDumps\explorer.exe.3964.dmp] User Mini Dump File with Full Memory: Only application data is available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible Product: WinNt, suite: SingleUserTS Machine Name: Debug session time: Mon Oct 21 11:21:30.000 2013 (UTC - 4:00) System Uptime: 0 days 0:06:20.449 Process Uptime: 0 days 0:05:54.000 ................................................................ ................................................................ .... Loading unloaded module list ............. This dump file has an exception of interest stored in it. The stored exception information can be accessed via .ecxr. (f7c.fe4): Access violation - code c0000005 (first/second chance not available) eax=00000000 ebx=07a3f080 ecx=00000400 edx=00000000 esi=00000002 edi=00000000 eip=76e170f4 esp=07a3f030 ebp=07a3f0cc iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246 ntdll!KiFastSystemCallRet: 76e170f4 c3 ret I've already tried removing certain context menu items. I disabled all unnecessary start-up items. Ran memtest86 and it looks fine on that end. It also happens when I browse through my local disk. Can anyone take a look into this? Thanks!

  Read the article

• What is the ideal way to set up multiple FTP enabled web accounts on Fedora?

  - by Nicholas Flynt

  I'm setting up a test server for use as a web development platform, and I'd like to mimic as closely as I can a typical shared hosting setup. That is, I'd like my server to have multple user FTP accounts, each of which links to a directory containing the webroot of the site, and I'd like apache to be able to easily see and manupulate these files. I'll admit: I'm not as familiar with Fedora as I'd like, I run Ubuntu on my home box and SElinux is giving me some grief. My initial plan was to have each user FTP into their home directory, and put the web directory there as well, but SElinux throws a hissy fit when apache tries to access anything outside of its web directory, so that plan was a no go. Would it be wise to continue this route, and perhaps mount web directories in user home folders so that FTP could still be used to access them, even though apache saw them in var/www like it expects? Would it make more sense to set up custom FTP accounts and use a single FTP user on the server box? What's the general course of action on something like this? I'm using vsftpd right now to host web directories, which is why I'm liking the home directory approach (it's simple and secure) but of course there's bound to be a better way to go about it. Thanks. (I'll leave other things, like restricted DB access and such, to another post. I'm interested right now with just getting FTP and apache to play nice in a multi-user environment.) PS: For the record, an issue I ran into when doing all of this was that if apache isn't running as the same user as the FTP account is saving as, there are permissions errors when FTP creates files, requiring the remote user to chmod the files to fix it. A logical fix would be to run apache in a special group, put all web users in this group, and have FTP access default to giving this group read/write access to everything like apache would expect, but I never could figure out how to accomplish this. Bonus points and cake if you know a solution.

  Read the article

• Port 22 is not responding

  - by Emanuele Feliziani

  I'm trying to make the jump to VPS from shared hosting for better performances and greater flexibility, but am stuck with the fact that I can't access the machine via ssh. First of all, the machine is a CentOS 6.3 cPanel x64 with WHM 11.38.0. Sshd is running (it appears in the current running processes). Making a port scan I see that port 22 is not responding. Port 21 is, but I am not able to access the machine via ftp (I think it's a security measure, but I don't know where to disable/enable it). So, I'm stuck in WHM and have no way to access the configuration of the machine, neither via ssh nor with ftp/sftp. When trying to connect with ssh via Terminal I only get this: ssh: connect to host xx.xx.xxx.xxx port 22: Operation timed out I also tried to access with the hostname instead of the IP address and it's the same. There seem to be no firewall in WHM and I have whitelisted my home IP address to access ssh, though there were no restrictions in the first place. I have been wandering through all the settings and options in WHM for several hours now, but can't seem to find anything. Does anybody have a clue as to where I should start investigating? Update: Thanks everyone. It was in fact a matter of firewall. There was a firewall not controlled by the WHM software. I managed to crack into the console from the vps control panel (a terrible, terrible java app that barely took my keyboard input) and disabled the firewall altogether running service iptables stop so that I was able to access the console via ssh with the terminal. Now I will have to set up the firewall again because the command I ran looks like having completely wiped the iptables. Can you recommend any newby-friendly resource where I can learn how to go about this and what should I block? Or should I just go with something like this: http://configserver.com/cp/csf.html ? Thanks again to everyone who helped me out.

  Read the article

• How do you recreate the System Recovery environment in Windows 7?

  - by Howiecamp

  I'm running Windows 7 Home Premium RTM (64-bit) and I want to take advantage of the system recovery tools (eg the Command Prompt) without using the Windows 7 DVD. My understanding is that this environment (WinRE) should be installed to your HDD by default as part of the Windows 7 installation. However, when I hit F8 on boot and select "Repair", I get: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. The "Info" line seems like the smoking gun. My next step was to boot from the Windows 7 DVD, and choose "Repair". It indicated my Recovery Environment wasn't on the Windows 7 boot menu (perfect) and offered to fix it. I said yes and rebooted, however same issue as above. In addition, when I booted in to Windows 7 and I looked at the boot menu options, the recovery/repair option was not there. Only my Windows installation. Finally, I ran the Disk Management tool (diskmgmt.msc) and took a look at the contents of my "System Reserved" partition (which was set to "Active" as normal). It's unclear to me what the contents should look like, however it is my understanding that the WinRE environment gets installed to this partition. (As part of the above troubleshooting I followed http://superuser.com/questions/25728/how-to-fix-windows-7-boot-process which lead to http://www.sevenforums.com/tutorials/668-system-recovery-options.html).

  Read the article

• NTLM, Kerberos and F5 switch issues

  - by G33kKahuna

  I'm supporting an IIS based application that is scaled out into web and application servers. Both web and applications run behind IIS. The application is NTLM capable when IIS is configured to authenticate via Kerberos. It's been working so far without a glitch. Now, I'm trying to bring in 2 F5 switches, 1 in front of the web and another in front of the application servers. 2 F5 instances (say ips 185 & 186) are sitting on a LINUX host. F5 to F5 looks for a NAT IP (say ips 194, 195 and 196). Created a DNS entry for all IPs including NAT and ran a SETSPN command to register the IIS service account to be trusted at HTTP, HOST and domain level. With the Web F5 turned on and with eachweb server connecting to a cardinal app server, when the user connects to the Web F5 domain name, trust works and user authenticates without a problem. However, when app load balancer is turned on and web servers are pointed to the new F5 app domain name, user gets 401. IIS log shows no authenticated username and shows a 401 status. Wireshark does show negotiate ticket header passed into the system. Any ideas or suggestions are much appreciated. Please advice.

  Read the article

• SQL SERVER 2005 with Windows 7 Problems

  - by azamsharp

  First of all I restored the database from other server and now all the stored procedures are named as [azamsharp].[usp_getlatestposts]. I think [azamsharp] is prefixed since it was the user on the original server. Now, on my local machine this does not run. I don't want the [azamsharp] prefix with all the stored procedures. Also, when I right click on the Sproc I cannot even see the properties option. I am running the SQL SERVER 2005 on Windows 7. UPDATE: The weird thing is that if I access the production database from my machine I can see the properties option. So, there is really something wrong with Windows 7 security. UPDATE 2: When I ran the orphan users stored procedure it showed two users "azamsharp" and "dbo1". I fixed the "azamsharp" user but "dbo1" is not getting fixed. When I run the following script: exec sp_change_users_login 'update_one', 'dbo1', 'dbo1' I get the following error: Msg 15291, Level 16, State 1, Procedure sp_change_users_login, Line 131 Terminating this procedure. The Login name 'dbo1' is absent or invalid.

  Read the article

• Windows 7 BSOD when changing power plan

  - by dd5

  i have a strange problem. When i want to change the power plan on my laptop from High performance to Balanced, Windows freezes and i get bsod. The power plan settings are all default. Laptop specs: - Intel Core i3 330M/350M - Intel® HM55 Express Chipset - DDR3 1066 MHz SDRAM 8GB - ATI Mobility™ Radeon HD5730 1GB DDR3 VRAM - Intel SSD330 128gb - Windows 7 Home premium I've searched the internets but couldnt find a similar issue. BSOD first started when i installed this SSD and stopped when i've updated the chipset controller driver then started again yesterday when i wanted to change the power settings plan.Minidump file here. Any help with this weird issue appriciated, thanks. Edit: - i've ran Memory diagnostic tool, - Intel SSD diagnostics - and updated the firmware to 3.2.1. Non of these steps worked or shown signs of errors - but still got BSOD when changing power plan settings. After analizing the dump file via osronline.com here a first few lines: CRITICAL_OBJECT_TERMINATION (f4) A process or thread crucial to system operation has unexpectedly exited or been terminated. Several processes and threads are necessary for the operation of the system; when they are terminated (for any reason), the system can no longer function. Arguments: Arg1: 0000000000000003, Process Arg2: fffffa8008661b30, Terminating object Arg3: fffffa8008661e10, Process image file name Arg4: fffff800033de270, Explanatory message (ascii) -- Solution -- Provided by Vinayak: After installing the Intel Rapid storage Technology from MajorGeeks, i didn't experience a BSOD since, thank you :)

  Read the article

• How to test/debug bad network wiring?

  - by Jack Lloyd

  I recently bought a place already wired with Cat 5E (8 ports, leading to a central closet). However attempting to get link, nothing works. On closer examination, it was obvious that the ends in the closet were wired backwards (brown on pin 1, etc). The jacks that I've pulled out of the wall do look to be correctly done. However, testing with a network cable tester shows zero link between any of the jacks and any of the ports in the closet - I had expected to just see a 1/8, 2/7, ... 8/1 mismatch, but instead get nothing at all. The runs are accessible and look neat, though they take some bends that seem quite sharp and are in some cases much longer than they need to be (the person who put this in was a professional electrician but I suspect this was the first time he ran network cabling). My best guess at this point is that he either bought bad cable, or put so much tension on it that he snapped wires. Though it seems surprising/unlikely that I wouldn't get at least one active wire on one of the 8 lines. So, my question: is there anything else I should try or test before I go ripping out everything and running new cable?

  Read the article

• SeLinux blocking connection to sshd on Ubuntu 9.10

  - by Barton Chittenden

  When I try to log on to my laptop, which runs Ubuntu 9.10, the server rejects my login attempts. Checking /var/log/auth.log, I see the following: Feb 14 12:41:16 tiger-laptop sshd[6798]: error: ssh_selinux_getctxbyname: Failed to get default SELinux security context for tiger I googled for this, and ran across the following: http://www.spinics.net/lists/fedora-.../msg13049.html Here's the part that I think relates to the problem that I'm having: Quote: What's wrong on my system? Why it's not possible to login even if selinux is in permissive mode? Any suggestions? I'd start by trying to figure out why sshd isn't running in sshd_t (it seems to be running in sysadm_t). Paul. selinux mailing list selinux@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mail...stinfo/selinux Yes, sshd is running in sysadm_t: ps axZ | grep sshd system_u:system_r:sysadm_t 3632 ? Ss 0:00 /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pi ls -Z /usr/sbin/sshd system_ubject_r:sshd_exec_t /usr/sbin/sshd Don't know why it's not sshd_t. I didn't modified something. It's a standard installation of sles11 with the default reference policy from tresys. Maybe this code snippet from policy/modules/services/ssh.te is responsible for that: Allow ssh logins as sysadm_r:sysadm_t gen_tunable(ssh_sysadm_login, true) Any ideas? Do you have boolean init_upstart set to on? if not try setting it to on. I do not believe ssh_sysadm_login boolean works currently but i may be mistaken. -- Yeah, setting init_upstart to on did the trick! THANK A LOT! Do you know why this prevents the user from logging in through ssh even if selinux is set to permissive?? Ok, so the million dollar question is "where do I set 'init_upstart=1'"? It's not clear from context which configuration file needs to be edited, and I'm not at all familiar with SELinux configuration.

  Read the article

• MySQL Not Turning On

  - by Shalin Shah

  I have an amazon ec2 instance running on the Amazon Linux AMI and its a micro instance. I wanted to install Django onto my server so I entered these commands wget http://www.mlsite.net/blog/wp-content/uploads/2008/11/go wget http://www.mlsite.net/blog/wp-content/uploads/2008/11/django.conf chmod 744 go ./go So after I was done, I ran sudo service httpd restart and sudo service mysqld restart and This is what came up for mysqld: Stopping mysqld: [ OK ] MySQL Daemon failed to start. Starting mysqld: [FAILED] So I deleted the django files /usr/local/python2.6.8/site-packages/django_registration.egg and I tried finding the error and I found out that in my /etc/my.cnf for the socket, it said socket=/var/lock/subsys/mysql.sock so I went to /var/lock/subsys/ and there was no mysql.sock. I tried creating one using vim but it still didn't work. Then I checked the error log and it said Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) So I am pretty much lost right now. I know it has something to do with mysql.sock If you might know a reason why this was caused could you please let me know? I have a wordpress site on my server, so i kind of need MySQL to work. Thanks!

  Read the article

• Why is crontab giving "No such file or directory" error when the file DOES exist?

  - by fettereddingoskidney

  I am getting the following three lines in an error message in /var/mail/username after the following job runs in crontab... 15 * * * * /Applications/MAMP/htdocs/iconimageryidx/includes/insertPropertyRESI.php Errors: /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 1: ?php: No such file or directory /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 3: syntax error near unexpected token `'initialize.php'' /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 3: `require_once('initialize.php'); The PHP script I am trying to execute DOES in fact exist, and I have made absolutely sure the spelling is correct several times. I ran a crontab on another script before and it worked just fine...any ideas?? The 2nd & 3rd Errors are from line 3 in the following script (the one I am trying to run with the crontab): <?php require_once('initialize.php'); require_once('insertPropertyTypes.php'); $sDate; if(isset($_GET['startDate'])) { $sDate = $_GET['startDate']; } else { $sDate = ''; } $insertResi = new InsertPropertyTypes('Listing', $sDate, 'RESI'); ?> When I run my script insertPropertyRESI.php in the browser, it runs just fine???? Also, initialize.php and insertPropertyTypes.php are in the same directory as insertPropertyRESI.php I am using MAMP with PHP 5.3.5 thakns for the help :?

  Read the article

• Vista won't boot. BSOD: Page fault in nonpaged area

  - by user31576

  Here's the story: I let Windows Update do the updates it wanted to do, then rebooted the computer. The updating process was taking time so I went away. When I came back, my computer was rebooting. It got as far as the Windows logo with the laoding bar. BSOD'd. Rebooted. And I'm stuck in this loop ever since. Looked up on the net, the "Page fault in nonpaged area" seems to be linked to faulty RAM or drivers. So I ran a memory test, it found no error. When I try in safe mode (with promt) I can see a list of drivers being loaded, then I get the same BSOD. I tried to repair using the Vista DVD, it says "nothing to repair". I tried to restore to a previous state, it says "no restore point found". So, my guess is, it's got something to do with the drivers. How can I identify the one causing the BSOD? If you have any other leads, What can I do? By the way, I'm writing from this very computer, running a linux distro I installed after the BSOD loop started. So i guess it's not an hardware issue. I have backed up important data, and will format and reinstall Windows if I must. But I'd like to avoid that. Thanks in advance for any help you can give me.

  Read the article

• Blank list of windows services

  - by Joe

  Recently when I open windows services (always as administrator) I get a blank list of services: When I try and click on one of the empty lines I get this "Script Error" message: This happens over and over again, after several times I restarted my computer. I can't pinpoint exactly when this started happening or if I made any specific changes to my computer at that time. Someone told my to try running scf /scannow as administrator, but when I try to do that the scan stops at 34% and I get the message: "Windows Resource Protection could not perform the requested operation." I am running Windows 7 Enterprise 64 bit, and I would really like to avoid reinstalling windows. Does anyone know how to fix this? Edit - Here is another attempt I made and some more information that might help: Following WhoIsRich's suggestion, I tried the command sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. This gave the error message "The arguments passed to sfc are invalid. The offline windows directory specified points to the online system", and then I realized this command is meant to be run after booting from another system. Since I don't have my windows installation disk right now, I used my own system to create a recovery disk, and then restarted my computer and used the recovery disk to boot. I then ran the above command, and I got the following message: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log". I then restarted my computer and let it boot up normally. The problem with windows services persists, and the CBS.log file is a long log file with many entries, and I don't know if there is useful information in it, and if there is, how to find it.

  Read the article

• PowerShell 3.0 x64 bit broken after installing KB2506143

  - by Dave Parker

  I have searched using all kinds of variations on relevant terms and I cannot find a single other instance of someone else having this excact same problem, so I am hoping someone here may have a clue. Problem I installed Windows Management Framework 3.0 (KB2506143) by downloading and running Windows6.1-KB2506143-x64.msu from Microsoft.com. Once completed I rebooted my machine as requested. After rebooting and logging in, I try to run the 64-bit PowerShell command shell and it comes up for a second then goes away. The 32-bit shell seems to work fine, it is just the 64-bit one that fails. Looking in the Fusion logs, I found: *** Assembly Binder Log Entry (10/4/2012 @ 1:51:48 PM) *** The operation failed. Bind result: hr = 0x80070002. The system cannot find the file specified. Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll Running under executable C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe --- A detailed error log follows. === Pre-bind state information === LOG: User = ********\***** LOG: DisplayName = Microsoft.PowerShell.ConsoleHost, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL <remainder omitted> GacUtil reveals that there is a Microsoft.PowerShell.ConsoleHost, Version=1.0.0.0, but not 3.0.0.0. I tried uninstalling KB2506143 (which removed MSVCRT90.dll and caused Windows Live Messenger to fail on load after rebooting again, so I ran a repair in stall on Windows Live Essentials and that fixed the Messenger problem) and then re-installing it, but nothing changed. If it helps, here are what I think may be the relevant parts of my hardware/software environment. Environment Dell Latitude E6510, 8GB RAM Windows 7 Professional 64-bit with SP1 Visual Studio 2010 Professional installed (includes .NET 4.0) Visual Studio 2012 Professional installed Microsoft Forefront Client Security Any clues out there? Thanks, Dave

  Read the article

• Windows 8 keeps signing out

  - by bill weaver

  Ran into a strange problem with Windows 8 Pro. Last night i installed Windows 8 Pro as an upgrade on a Sony Vaio laptop that had Windows 7 Pro on it. The install seemed to go okay. Then once installed, live tiles seem to work, native/Metro apps will start okay, but pretty soon after going into an app or settings, the screen flashes a few times and we're back to the lock screen. Signing in appears to do a full login. I've tried this with a local account and with a live.com account. This is someone else's laptop, so we decided to let it breathe, in case the install was still settling in. Well, they say today it's doing the same thing. Open the music app, and within a minute it's back to signon/lock screen. However, they can go to the actual Desktop and run Zune to play music, and it seems happy. In the past, i've installed retail Windows 8 Pro clean on a homebrew system, as an upgrade on a Dell laptop with a zillion apps and drivers, neither with any problems. Also, i've had the consumer preview and release candidate installed as well, no problems. Any ideas on what's going on here?

  Read the article

• USB Virus, "Program too big to fit in memory"?

  - by ApprenticeHacker

  I got an installer for a piece of software via usb from a friend.Now what was weird was that although my friend and I had the same OS, same brand of laptop and I had a newer version (though I don't think this quite matters), the installer was running properly for him but not for me. It just showed a command line window and exited. I ran it via a batch file in which I included "pause" after running it. Here's the screenshot: Later my friend called me and told me that it was the USB that was the problem. It had some kind of virus on it and it corrupted every executable or folder on it , and it renamed all the sub_files inside folders to some weird jargon. He had tried using another USB and the installer worked fine. Now the friend has (unfortunately) gone back to his city and I can't get the installer again from him. My question is: Is there any way to repair the installer executable and run it? and Do you think the virus has infected my PC? (I have run a system scan with my antivirus and it showed nothing but still I'm worried)

  Read the article

• SSL Connection Error

  - by toffee.beanns

  I have purchased a comodo ssl cert and have submitted the Certificate Signing Request (CSR) generated by my server to the ssl management site. With the 3 files it returned me with, - AddTrustExternalCARoot.crt - PositiveSSLCA2.crt - www_mydomainname_com.crt I have uploaded them to my /etc/ssl/ssl-certs folder and have updated my virtual host in my sites-available and restarted accordingly. NameVirtualHost 107.167.120.195:80 #sample ip address NameVirtualHost 107.167.120.195:443 #sample ip address ......... #normal http virtual host (working well) <VirtualHost 107.167.120.195:443> ServerAdmin [email protected] ServerName mydomainname.com ServerAlias www.mydomainname.com DocumentRoot /var/www/mydomainname SSLEngine on SSLCertificateFile /etc/ssl/ssl-certs/www_mydomainname.com.crt SSLCertificateKeyFile /etc/ssl/ssl-certs/server.key SSLCertificateChainFile /etc/ssl/ssl-certs/PositiveSSLCA2.crt </VirtualHost> I have also enabled ran 'a2enmod ssl' and it's enabled. This is the error I get when I access the webpage https in chrome: SSL connection error Error code: ERR_SSL_PROTOCOL_ERROR Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have. I have also checked out my apache log files and there seems to be an error saying that the Common Name (CN) is not the same as the server. RSA server certificate CommonName (CN) `www.mydomainname.com' does NOT match server name!? and Invalid method in request \x16\x03\x01 What should I do?

  Read the article

• MSSQL Timing out, a couple of questions...

  - by user29000

  Hi, About once a week, my MSSQL server is timing out, or rather the machine runs out of RAM. This morning it reached 3.9GB of the available 4, with MSSQL taking up 2.5GB. I'm concerned that i've not configured SQL to release memory as it should, so I ran sp_who2 while the timeouts were occuring to see what process were running. If i could post the CSV datafile i would, however, there were 85 processes in total, mostly related to the Full Text service: FT Gatherer - About 35 of these running under the 'sa' account against the master database with status of either sleeping or background, many were dependant on other processes. Is that normal? MySite database - There were only 5 processes for the one active site/database and all were either sleeping or suspended - but their lastBatch dates were set to 1/12/2020. Is that normal? The datbase is only about 20mb in size the traffic levels are very low, so i'm thinking of maybe limiting the amount of RAM SQL has access to (from unlimted to maybe 2GB). Any thoughts / advise would be appreciated. Mny thanks Ben

  Read the article

• Determine if the "yes" is necessary when doing an SCP

  - by glowcoder

  I'm writing a Groovy script to do an SCP. Note that I haven't ran it yet, because the rest of it isn't finished. Now, if you're doing an scp for the first time, have to authenticate the fingerprint. Future times, you don't. My current solution is, because I get 3 tries for the password, and I really only need 1 (it's not like the script will mistype the password... if it's wrong, it's wrong!) is to pipe in "yes" as the first password attempt. This way, it will accept the fingerprint if necessary, and use the correct password as the first attempt. If it didn't need it, it puts yes as the first attempt and the correct as the second. However, I feel this is not a very robust solution, and I know if I were a customer I would not like seeing "incorrect password" in my output. Especially if it fails for another reason, it would be an incredibly annoying misnomer. What follows is the appropriate section of the script in question. I am open to any tactics that involve using scp (or accomplishing the file transfer) in a different way. I just want to get the job done. I'm even open to shell scripting, although I'm not the best at it. def command = [] command.add('scp') command.add(srcusername + '@' + srcrepo + ':' + srcpath) command.add(tarusername + '@' + tarrepo + ':' + tarpath) def process = command.execute() process.consumeOutput(out) process << "yes" << LS << tarpassword << LS process << "yes" << LS << srcpassword << LS process.waitfor() Thanks so much, glowcoder

  Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >