Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 129/215 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

• smartOS HPC config suggestion

  - by Andrew B.

  I'm configuring a brand new HPC server and am interested in using SmartOS because of it's virtualization control and zfs features. Does this configuration make sense for a SmartOS HPC, or would you recommend an alternative? System Specs: 2x 8-core xeon 384 GB RAM 30 TB HDs with 2x512GB SSDs Uses: - zfs for serving data to different vms, and over the network; 1 SSD for L2ARC and 1 for ZIL - typically 1-2 ubuntu instances running R and custom C/C++ code My biggest concerns as a newbie to SmartOS and ZFS are: (1) will I get near-metal performance from ubuntu running on SmartOS if it is the only active vm? (2) how do I serve data from the global zfs pool to the containers and other network devices?

  Read the article

• Canon HV20 recognized, but no drivers in Windows 7 x64

  - by Tuminoid

  My Canon HV20 camcorder is properly recognized when connected via Firewire to Windows 7 x64, but no drivers are installed for it. Windows or I cannot locate any drivers for it as, but it should be working off-the-shelf. I googled a lot, and found instructions to set IEEE 1394 host to legacy mode via Device Manager, but Windows doesn't offer me the legacy option at all. If I check the properties of Canon&HV20 device in Other devices section it says The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. It used to work just fine on my previous installation of Vista x64 and same hardware :/

  Read the article

• Using VMware's ESXi, can I plug in 30 USB Wireless adapters and allow each of 30 VMs one?

  - by 31eee384

  I'm assuming ESXi will act very similarly to VMware Workstation or other products, so answers based on knowledge of those programs might also help. I want to plug in 30 USB Wireless or Ethernet adapters into my server, and let each VM access one and only one of these devices. Unfortunately, I don't have the hardware to just try it out as the purchase of hubs and adapters hinges on the result of this question. The answer could be a resounding "yes, easy!" and that would be great. I couldn't find any answers to this question with google, and it's possible that this is because it's so easy to do. Thanks!

  Read the article

• df-h command in ubuntu

  - by Esha Sharma

  I am a new user of Ubuntu. When I type df -h in terminal , it gives me list of all storage devices and space usage. In my system I get this. Filesystem Size Used Avail Use% Mounted on /cow 934M 173M 761M 19% / udev 925M 4.0K 925M 1% /dev tmpfs 374M 856K 373M 1% /run /dev/sdb1 7.5G 2.8G 4.8G 37% /cdrom /dev/loop0 1.5G 1.5G 0 100% /rofs tmpfs 934M 16K 934M 1% /tmp none 5.0M 0 5.0M 0% /run/lock none 934M 76K 934M 1% /run/shm /dev/sda 299G 74M 299G 1% /media/q I understand that /dev/sda is my hard drive which is 320 gb(in gib it is 299 and hopefully that is what is being displayed) and /dev/sdb1 is pendrive of 8gb from which I am running the live cd. My question is what are the other folders and what is the physical location of these folders if complete memory is taken by the device dev/sda?

  Read the article

• Can I mix CAT5 and CAT6?

  - by Jason94

  I'm thinking of upgrading the "backbone" of my network, taking a CAT6 cable from my router (DLINK DIR-655 (has cat6 ports)) to a gigabit swith in the tv rom (25m). I have two devices there that uses network (xbox and tvbox, both of them have cat5). Will my net be downgraded to 100mbit as max speed, or will I get 1 gigabit between my router and switch, and 100mbit between tvbox and xbox? From back in the days i have a tool to create my cat5 cable (the plug tool thingy), can I use this for my cat6 too?

  Read the article

• VM: Windows 7 host, Linux guest, VT-d?

  - by chx

  I am sick of the driver issues of Linux. So I am planning to switch to Windows 7 as a host and virtualize my Linux into it. My laptop has integrated Intel graphics and supports VT-d. For speed reasons I would like to assign that card to Linux. Now, Parallels could do it but this page says Note: If you have only one PCIe video adapter, its name will be grayed out in the PCI Devices list and you will not be able to allocate it to your virtual machines. I would be perfectly fine with a headless Windows 7 (I can remotely admin from other computers or just the Linux guest) -- is there any VM software that doesn't have this restriction?

  Read the article

• Suggestion of device WiFi range in it's spec. Possible?

  - by SeeR

  I have router Draytek Vigor 2100VG at home almost in the center of it. The farthest point at my home is my balcony, ~12m from it. I have constant wifi signal range problems with some of my devices, but not with others. Notebook Lenovo W510 - no problems Nokia Home Music - always on 10m - no problems Sony PS3 - always on 7m - no problems Sony tablet S - problems around 6m Sony PSP - problems around 8m Sony PS Vita - problems around 8m Nokia E63 - problems around 8m I'm curious why my Notebook don't have any problems even on the balcony? I guess it has better hardware or uses more power for transmission. This information is really important when you want to buy new device/computer, so my real question is: Can device wifi range can somehow be found/suggested from official hardware technical specification? If not Is there some web page with wifi range reviews?

  Read the article

• Using iTunes within Terminal Services 2008 R2 - Pitfalls etc

  - by Kristiaan

  I was hoping to get some further information on any possible Do's and Don't when it comes to installing, using and maintaining iTunes within a Termina Server environment. We have come across a situation in our company whereby some of our users who are using thin clients now need the ability to sync, update and manage their devices, previously they used either standard desktop systems or laptops so there was no issue with running iTunes. I have not found much information on the web about using iTunes within a Terminal Server Farm, Id like to find out if iTunes works within the environment, any known or common issues that occur due to running it like this.

  Read the article

• BES 5.x issues when connecting to Exchange 2010 SP2 RU4

  - by makerofthings7

  Ever since we updated from SP1 RU4 to SP2 RU4 we have noticed that our BES devices will simply stop receiving email. This has occurred at least 5 times in the past few weeks. Today, while speaking with RIM support (a T3 contract), they said that they have reports of sporadic connectivity issues from some BES users. This has been occurring with Exchange 2010 SP2 RU4, and have no public information to give us. We were able to temporarily get things running by doing any or all of the following Restart the BES server Recreate the MAPI profile (deleted the keys in the registry) Restart the CAS servers Wait it out (2 hours) What other options should I take to resolve this issue?

  Read the article

• Linux foxboard network monitor

  - by het.oosten

  I want to use a Foxboard a simple network monitor for multiple routers (all routers are connected to the internet). Foxboard is a mini pc with an embedded version of Debian. My idea is to use multiple virtual network devices like this: eth0 192.168.2.10 eth0:1 192.168.3.10 eth0:2 192.168.4.10 I found a nice Python script to ping an external host here (the solution from Ryan Cox): http://stackoverflow.com/questions/316866/ping-a-site-in-python Is it possible to configure Debian to use eth0 when I ping www.site-a.com and eth0:1 when I ping www.site-b.com?

  Read the article

• How to batch convert video files on OSX for AppleTV2 / iPhone4?

  - by Luke404

  I'd like to have a solution to batch convert video files to a format suitable for the AppleTV2, iPad2, iPhone4, while at the same time preserving as much quality as possible; I want a single output file that will play on both devices and also good for consumption by other Mac software (eg. Aperture, iMovie, iTunes). Batch processing is a requirement since I'm gonna convert many many files from different sources (mainly lots of videos captured by compact digital cameras, cell phones, and so on). I'm looking into ffmpeg and MEncoder (both installed via MacPorts), but I can't seem to find a suitable preset for libx264 even if everyone out there is talking about them. A different approach involving different software would be ok too as long as I can script it somehow and run it on a whole directory full of files to be converted.

  Read the article

• Upgrade no raid server to raid

  - by AZee

  I have just learned that our PDC has a single drive with 2 partitions. I also know that this drive has bad blocks as recorded in the event log. What I would like to do is to convert this to a RAID solution with a nice balance between economy and performance. I will admit that I have only configured servers with RAID from scratch, and have no experience upgrading an existing system into a RAID system. In fact, I'm not sure it is even possible. Since this is the PDC for 350+ workstations downtime is important. I'd like to hear from other System Administators how they would tackle this and their recommendations for all devices. At this time it seems to me that I can replace the existing drive and then restore from backup or install a controller, drives, configure the RAID an basically start from scratch. Thank you for taking your time. ~AZee

  Read the article

• Configure PL2303-based USB-to-RS232 adapter to stay awake when no active device is present

  - by casualuser

  I am resurrecting some X10 devices with the aid of a USB-to-RS232 adapter. The problem is, that the adapter only works with the Firecracker device when there is another serial device on the line (the Firecracker is a pass-through device that monitors the RTS and DTR lines to do its magic). Is the PL2303 going to sleep without a real device on the line? Is there an option or command to keep it awake? Is there a cable configuration that would make it work without a real serial device present?

  Read the article

• Portable Display doesn't work anymore

  - by RipCord

  My USB portable monitor will not work since I installed the hard drive onto an HP laptop. I have installed all the new hardware drivers and do not have any more device issues in device manager view. My old laptop was a lenovo. The new one is an HP. The system seems to recognize devices that I connect via, usb but the portable display still does not show anything on the screen. It is probably a conflict in the registry but I'm not sure how to find it and the Power User does not have the luxury of letting me troubleshoot for hours to isolate the problem.

  Read the article

• Is there a way to reliably backup and restore a complex network configuration on Windows XP?

  - by djangofan

  I have some Windows XP laptops (10+) that host a ad-hoc WIFI network connection to wireless PDA devices. The laptop itself is connected via a 3rd party VPN radio network. The radio network itself seems to be reliable. If one small thing goes wrong with the network configuration then the PDA loses connectivity and so I need a way to backup a networking config , either via a script or a 3rd party program, so that I can restore a working network configuration if something goes wrong. Is this possible? Does anyone have any ideas?

  Read the article

• How do I get the machine name from an IP via Multicast DNS?

  - by Adam

  I have a list of IP addresses on a network, and most of them support multicast DNS. I'd like to be able to resolve the server name instead of just having the IP address. ping computer.local 64 bytes from 192.168.0.52: icmp_seq=1 ttl=64 time=5.510 ms 64 bytes from 192.168.0.52: icmp_seq=2 ttl=64 time=5.396 ms 64 bytes from 192.168.0.52: icmp_seq=3 ttl=64 time=5.273 ms Works, but I'd like to be able to determine that name from the IP. Also the devices don't necessarily broadcast any services, but definitely do support mDNS broadcast. So looking through services won't work.

  Read the article

• Converting Visio (.vsd) files to pdf automatically

  - by Aseques

  I am trying to create a scheduled task to convert all my .vsd files to pdf so all of our devices can read them (linux, mac, smartphones, etc..) and I would prefer not paying for something that can be done with Visio + PDFcreator. The approach of using openoffice doesn't work with .vsd files since it's not a supported format ( Method/tools for batch-converting Microsoft Word files into PDF?) What I've currently is this: 'C:\Program Files\Microsoft Office\Visio11\VISIO.EXE' /pt "Z:\Archive\Files.vsd",-PPDFCREATORPRINTER /nologo That is able to open automatically the document I want and to prepare it to be printed, the only missing part is that it requires me to confirm on the printing dialog. There's some information here: http://support.microsoft.com/kb/314392 but it doesn't explain abotu non interactive printing.

  Read the article

• duplicate video stream using a router (?)

  - by Dani

  I have a viedo stream coming from one site, I want to do the following with the minimum delay possible: I want to duplicate the stream (inside the router - preferred) and send it to a few more locations one of them is local network and the rest - on other networks. I want to be able to do it to several streams simultaneously. Is it possible to do this - using network devices only ? What device is capable to do this ? (I can always record the stream and rebroadcast it - but that's a lot of delay, I'm looking for functionality that similar to port duplicating, but on higher layers). Thanks.

  Read the article

• Emulate a USB port as a USB flash drive?

  - by Wilco

  Does anyone know of any software that can emulate a USB flash drive through an available USB port in OS X? Perhaps some way to map a directory to a USB port that could then be connected to another device that supports reading USB storage devices? I'd love to connect my laptop to my car's USB port and access files as if it were a USB drive. I know about the target disk mode with firewire (not sure if this is also supported over USB), but I was hoping for something that doesn't require booting outside of the OS (I want to retain use of the machine). Any ideas?

  Read the article

• How do you synchronise huge sparse files (VM disk images) between machines?

  - by chrisdew

  Is there a command, such as rsync, which can synchronise huge, sparse, files from one linux server to another? It is very important that the destination file remains sparse. It may be longer (but not bigger) than the drive which contains it. Only changed blocks should be sent across the wire. I have tried rsync, but got no joy. groups.google.com/group/mailing.unix.rsync/browse_thread/thread/94f39271980513d3 If I write a programme to do this, am I just reinventing the wheel? http://www.finalcog.com/synchronise-block-devices Thanks, Chris.

  Read the article

• Audio switch with multiple 3.5mm input & outputs

  - by David Nguyen

  I've been searching for a device that simple allows me to pick one input and one output from multiple input/outputs. I thought this would be a called a switch but I can only find ones with one input. Is there such a device that can do this? I will be attaching various devices, i.e. multiple console sound, PC & Laptop inputs and outputting to my speakers or headphones. I'm looking for something small and simple. All inputs and outputs are 3.5mm.

  Read the article

• Asus RT-N66U forgets USB-Printer

  - by heysamhey

  about a week ago I bought the new Asus RT-N66U as the new Router in our little company. There are about 5 clients and 2 printers. There's a USB-only printer as well, therefor we bougth a router with USB-printer sharing. The setup and everything works smooth, but then after one day, and I still haven't found out why, suddenly the printer dosen't show up in the list of connected devices in the routers webinterface anymore. Of course I loose the possibility of printig, even though the printer shows up as "online" in the system settings. Can anybody guess the reason for this problem? Thank you very much

  Read the article

• Raid system fails to boot after moving from 2.6 kernel to 3.5

  - by user846226

  I'm running Gentoo Linux with a custom compiled kernel and I've just migrated from a 2.6 kernel to a 3.5. As my HD's are on RAID 0 mode I use a custom initrd file in order to be able to boot. While kernel 2.6 is able to boot without problems the new 3.5 compiled kernel fails to boot complaining about no block devices found. After taking a look at initrd.cpio contained scripts I can see the failure message is given by mdadm tool. Does anyone has a clue about that? Edit: this morning i noticed there was some kind of issue on my old initrd which works fine for 2.6 kernels, so created a new initrd which works fine and let me to boot into GNU/Gentoo Linux with same 3.5 bzImage. It could be an issue of mdadm, gonna check it. https://bugs.gentoo.org/show_bug.cgi?id=416081

  Read the article

• SQL Server 2012 Installation Hangs

  - by Rivka

  We have a Windows 8 machine that we installed SQL Server 2005 on first. We then uninstalled it and installed SQL Server 2012 - unsuccessfully. The installation wizard hung at the point where it says: SqlEngineDBStartConfigAction_install_configrc_Cpu64 The event log showed the following error: The SQL Server (MSSQLSERVER) service terminated with the following service-specific error: WARNING: You have until SQL Server (MSSQLSERVER) to logoff. If you have not logged off at this time, your session will be disconnected, and any open files or devices you have open may lose data. We got the same error while trying to start the service. We tried uninstalling and re-installing but faced the same issue. Any help would be appreciated.

  Read the article

• Using VMware's ESXi, can I plug in 30 USB Wireless adapters and allow each of 30 VMs one?

  - by 31eee384

  I'm assuming ESXi will act very similarly to VMware Workstation or other products, so answers based on knowledge of those programs might also help. I want to plug in 30 USB Wireless or Ethernet adapters into my server, and let each VM access one and only one of these devices. Unfortunately, I don't have the hardware to just try it out as the purchase of hubs and adapters hinges on the result of this question. The answer could be a resounding "yes, easy!" and that would be great. I couldn't find any answers to this question with google, and it's possible that this is because it's so easy to do.

  Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >