Search Results

Search found 4170 results on 167 pages for 'dnfs 11g mount'.

Page 129/167 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

• LUNS access issue in ESX4 Cluster server

  - by rmustafa

  HI, I've created volumes in equallogic in PS 6000 XV(having 2 member which is in 1 pool), checked & those volumes can be easily detected my ISCSI software in windows. But the problem with ESX , not able to see the assigned disk on ESX server, I can explain what I've done: 1.Created Cluster with enabled HA & DRS 2.Added 3 ESX4 HOST 3.Added VMkernel & configured in all 3 ESX4, enabled vmotion & FT on the same adapter. 4.went to iSCSI storage adapter properties, enabled iSCSI 5.Trying to discover the available storage with the controller IP on dynamic discovery, but not able to see the assigned storage Note: the same volume is accessed to windows that means there is no issue from storage , am I right ???? Note: I wanted to mount the same volume in all 3 ESX host. Please suggest .... Thanks & Regards, Rashid Mustafa

  Read the article

• Reconnect Attempts for CIFS share

  - by Davin

  I have a CIFS share mounted in the FSTAB on Ubuntu server, which connects to our SAN and works without issue. Last night we had an issue with the SAN for about 12 hours. We corrected the problem and the Windows boxes restored their mappings. The Ubuntu box did not, but we were able to restore with [mount -a]. I saw options to specify retries in man for NFS but not CIFS. Any ideas on ensuring a reconnect if the SAN goes down again?

  Read the article

• MDADM RAID5 array showing as CLEAN FAULTY

  - by Dean Reilly

  A drive dropped out of my raid 5 array yesterday. It looks like the reason was due to a bad controller so I switched it out and attempted to re-add the drive but mdadm claimed it couldn't do it. So I zerod the superblock and just added the drive normally and left it to resync. When I came to check on the array this morning I was unable to mount it at all and it's now showing as CLEAN FAULTY with two drives missing. The two missing drives are listed as spare and faulty spare. Is there anything I can do in this situation or is the array gone?

  Read the article

• two samba servers and one ldap backend

  - by user2346281

  I had setup a Samba 3 server as PDC with a passdb LDAP backend. Server SID: S-1-5-21-3270... Domain: A Every user has a SambaSID beginning with this Server SID. But now I try to setup a second server for some shares. This server should use the same LDAP backend because I don't want to have two LDAP backends. Otherwise I have to do modifcations (e.g. add users) twice. Second Server SID: S-1-5-21-3797... Domain: B But now when a user try to mount this new share I see this error in samba log: The primary group domain sid(S-1-5-21-3797....) does not match the domain sid(S-1-5-21-3270...) for xxx(S-1-5-21-3270...). I understand the problem but what can I do to avoid to maintain two LDAP backends? Regards, Simon

  Read the article

• Trouble accessing network drives in Windows 7

  - by Warlax

  Hi, Recently purchased a LaCiE network drive. Connected it to my router, configured it, added a user for myself. Installed the "Network Assistant" that came with it - no problem. Went to My Computer Network, found the network drive - was prompted for a login/password to see the contents, types \user and password (leading slash to get rid of DOMAIN) and accesses contents. There is one open share that I can access/mount without problem and there's another share with my user name as set-up via the network drive's web-based config. Double-clicked on that, prompted again. user/password doesn't work! It says I have no permissions but the user/pass combination is PERFECT. Some Windows Vista posts talk about a Local Security Policy menu - but that's nowhere to be found. Any ideas? (Windows 7 Professional BTW).

  Read the article

• No free disk space ;[

  - by skomak

  Hi I have weird situation because Linux df command says that there is no free disk space [root@backup cache]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 72G 70G 0 100% / /dev/sda1 190M 11M 170M 7% /boot tmpfs 248M 0 248M 0% /dev/shm but du -sh /* says [root@backup cache]# du -sh /* 4.0K /bacula-restores 7.4M /bin 5.4M /boot 3.6T /data 116K /dev 55M /etc 204K /home 76M /lib 16K /lost+found 12K /media 0 /misc 16K /mnt 8.0K /mount 0 /net 8.0K /opt 0 /proc 2.3G /root 32M /sbin 8.0K /selinux 168K /share 8.0K /srv 0 /sys 361M /test 20K /tmp 3.2G /usr 1.5G /var Could you tell me where is a problem? Where is my space? I can't figure it out :(

  Read the article

• Outlook pst problem

  - by tking

  I've used outlook pst files in the past with great success. a few weeks ago I exported about 2 years worth of email into a pst file. size is around 1.5 gb. when i try ti import that pst back into my outlook it says its not a pst file. I've tried to repair it using pstscan and it repairs errors and will even mount it in Outlook but Outlook cant see any emails, like its an empty pst file. Is there any other way to recover my emails besides loading up backupexec and recovering my mailbox before i made the pst?

  Read the article

• Upgrading Fedora 16 to 17 with crypted LVM

  - by nijansen

  As the title suggests, I want to upgrade Fedora 16 to the Fedora 17 Alpha build, but I am struggling to do so because of my crypted HDD. To avoid the hustle of CD-ROM or USB install, I thought the preupgrade would be a good idea. It downloads the stuff, stores an image somewhere and creates an entry in my boot manager. When I choose to upgrade from the boot manager it crashes halfway through because it can not access any of the prepared files (because it's crypted) and hands me a debug console. Unfortunately, this case apparently is not covered by the Fedora troubleshooting advice, at least I was not able to find anything there. I would guess I have to mount my HDD manually, but 1) how? and 2) how do I resume the upgrade afterwards? I would really appreciate a push in the right direction.

  Read the article

• Seeking webcam with own IP address

  - by Mawg

  I am not sure if this is the correct place to post, but I couldn't find anywhere better. I am looking for a webcam/movie cam and this site seems more addressed to still images, but ... I am looking for a small, rugged web-cam which can be hand-held or perhaps head-mounted (failing that I can settle for a tripod mount, but I need portability). It must have its own IP address so that anyone can view its video stream from a web browser. I would prefer 2 way voice communication too. Encryption of data is nice, as is compression (H.264). Maybe also remote control, like causing it to zoom from the browser. Does anyone have any suggestions, even suggestions of somewhere else to look? Thanks very much in advance.

  Read the article

• ubuntu12.04 hangs at checking battery state

  - by crystalbass17

  My 12.04 system hangs at "Checking battery state". At this stage, no commands work eg: ctrl+alt+f1, alt+f5. I ran recovery mode, I ran the command sudo mount -o remount, rw sudo dpkg-reconfigure gdm and gdm was the only one installed so I didn't get a GUI screen. I have an integrated graphics card "Intel Corporation Mobile 4 chipset Integrated Graphics Controller (rev 07)". So I cannot install nvidia drivers as everyone else suggests. I have gone through several similar questions but everyone suggests reconfiguring gdm or reinstalling graphic drivers. I did sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get upgrade to get the latest x-swat drivers. The system still hung at the same line. The other option is to reinstall ubuntu, which is out of the question, since we have a very specific install for our project where the settings are very hard to duplicate. Suggestions/Comments welcome.

  Read the article

• df command show no output

  - by user119720

  I'm running the linux distro on my server.When i want to verify the size of the disk, i'm issuing this commnand to get the output. df -h But it does not produce ANY output.Strangely enough when i'm issuing other command such as fdisk -l or du -h it can show output normally. Does anyone now why is this happening?Thanks. edit: here is the output of cat /etc/fstab none /dev/pts devpts rw 0 0 and this is for mount command none on /dev/pts type devpts (rw) none on /proc/sys/fs/binfmt_misc tpe binfmt_misc (rw) edit(2): here is the output of cat /proc/mounts /dev/vzfs / vzfs rw,relatime,usrquota,grpquota 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 none /dev/tmpfs rw,relatime 0 0 none /dev/pts devpts rw,relatime 0 0 none /proc/sys/fs/binfmt_misc binfmt_msc rw,relatime 0 0

  Read the article

• Is there an encrypted write-only file system for Linux?

  - by Grumbel

  I am searching for an encrypted filesystem for Linux that can be mounted in a write-only mode, by that I mean you should be able to mount it without supplying a password, yet still be able to write/append files, but neither should you be able to read the files you have written nor read the files already on the filesystem. Access to the files should only be given when the filesystem is mounted via the password. The purpose of this is to write log files or similar data that is only written, but never modified, without having the files themselves be exposed. File permissions don't help here as I want the data to be inaccessible even when the system is fully compromised. Does such a thing exist on Linux? Or if not, what would be the best alternative to create encrypted log files? My current workaround consists of simply piping the data through gpg --encrypt, which works, but is very cumbersome, as you can't easily get access to the filesystem as a whole, you have to pipe each file through gpg --decrypt manually.

  Read the article

• Should I quit using Ifconfig?

  - by Zhen

  With the servers that mount Infiniband cards, when I use the ifconfig command I have the warning: Ifconfig uses the ioctl access method to get the full address information, which limits hardware addresses to 8 bytes. Because Infiniband address has 20 bytes, only the first 8 bytes are displayed correctly. Ifconfig is obsolete! For replacement check ip. Should I quit using ifconfig? It is deprecated in favor of ip command? Or it will be update in the near future.

  Read the article

• Recover files after unsuccesfull partitioning

  - by arsan

  I wanted to install another Linux on my comp, so i tried to resize one of my NTFS partitions with Norton Partition Magic, but it didn't complete successfully and it showed some errors and said that the partition is not resized and that it's the same size like before, but when i rebooted my comp i couldn't open that partition anymore and also i am not able to mount it from my linux. So this is my question: I had very important data on that partition - can i recover it back ? I guess nothing's deleted it's just something messed up so it's not usable, but can i get it back ? Please if there's any possible way of doing it, reply to me, thank you.

  Read the article

• Disable or sleep secondary HDD in Macbook

  - by cpak

  I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original HDD to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the HDD is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the HDD when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it. Grateful for any input on this!

  Read the article

• Public IP shows strange characters and Facebook registers logged-in session to a different location

  - by Stuart Kershaw

  I'm encountering some IP strangeness today and hoping to find an explanation. In short, I'm based in Seattle, WA with my ISP being Comcast. While browsing Facebook's account settings, I noticed that my active session was located to Mount Laurel, NJ. At that point I ran a search in Google for 'my public IP', which returned an interesting result: a string of characters in the following format: 2601:8:b000:xxx:xxxx:xxxx:xxxx:xxxx Normally, a search for my IP returns something like: 67.xxx.xx.xxx A phone call to Comcast got me nowhere, but using Comcast's phone-menu debugging tools, I was able to send a 'refresh signal' to my modem. After that, the search for 'my public IP' yielded the expected result... for about 5 minutes, and then it returned to the new string of characters. Does anyone know of an explanation for this?

  Read the article

• Installing a 3.5" hard drive in a 2.5" bay?

  - by Javawag

  I know this question seems ridiculous, but my server (actually a Mini-ITX computer) has a 2.5" hard drive bay and an empty CD-ROM bay underneath it. If I removed the hard drive bay, I could probably mount a 3.5" hard drive in the CD-ROM bay which is unused... I know it's a big of a kludgy way to do things but it does mean upgrading the hard drive to 2TB is much cheaper. My question is: are the power requirements of a 3.5" disk the same as 2.5" one? I know the connectors physically will still fit, but I don't want to destroy my server!

  Read the article

• Active node stops resources when pasive node is shutdown

  - by Wakaru44

  2 nodes, active/pasive. 2 resources, a virtual ip, openLdap, and the nfs mount where openldap saves the data. When both nodes are up, things worked fine. You could move resources away and put the active in stanby. But when i rebooted the passive node, ( with the resources in the active node), and the passive node loses conectivity, all the resources in the active where stopped by pacemaker. I'm reading the documentation right now, but I just need a little quick tip to figure what could be hapenning here. Im using: corosync pacemaker RHEL 6

  Read the article

• I've created a software RAID on SUSE EL 10 and now I need to monitor it.......

  - by Thomas B.

  I have created a Software Raid using the yast2 GUI on SUSE ES 10/11. The raid works great and it's a raid 5. I have 5 Drives they are cheap 2GB Cases that have 2 - 1TB Drives in each case (Serial ATA Drives) and I connect them in via Esata to the motherboard. The problem I have as this is "cheap" storage when of the the 5 drives goes out on the RAID I seem to have no logs of any issues and it get's harder and harder to write to it until it dies. I use SAMBA to mount the 4TB parition to my PC's in my home on a GIG network. My question is this, are there any good (Free) tools in Linux to monitor a raid or the drives on the raid to detect any problems??? I haven't found any yet and was just wondering if some exist.

  Read the article

• Advise on a 240,000 sqft outdoor wireless network

  - by whlspacedude

  I would be very appreciative of some advice in the purchase of equipment to provide a wireless network that covers the entire area of an outdoor arena. The area is rectangular-ish in shape. 400ft wide and 600ft long. It has 6 light towers, 1 on each of the 400 foot ends and 2 on each of the 600 foot ends. I can mount on anything and spend as much money as needed. The needs of the network would be to provide access for, up to 15 wireless HD cameras with audio, and a public-wifi network. Can someone point me in the right direction as far as equipment and antennas ? I can provide any additional information that you may need.

  Read the article

• UUID in Mountain Lion

  - by Naji

  I am trying to find my external HDD UUID in Mountain Lion but diskutil info /dev/disk1s1 returns: Najis-MacBook-Air:~ ****$ diskutil info disk1s1 Device Identifier: disk1s1 Device Node: /dev/disk1s1 Part of Whole: disk1 Device / Media Name: Untitled 1 Volume Name: My Book Escaped with Unicode: My%FF%FE%20%00Book Mounted: Yes Mount Point: /Volumes/My Book Escaped with Unicode: /Volumes/My%FF%FE%20%00Book File System Personality: NTFS Type (Bundle): ntfs Name (User Visible): Windows NT File System (NTFS) Partition Type: Windows_NTFS OS Can Be Installed: No Media Type: Generic Protocol: USB SMART Status: Not Supported Total Size: 2.0 TB (2000364240896 Bytes) (exactly 3906961408 512-Byte-Blocks) Volume Free Space: 212.5 GB (212506509312 Bytes) (exactly 415051776 512-Byte-Blocks) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: Yes Ejectable: Yes Whole: No Internal: No And there is no UUID. What is wrong exactly? Thank you.

  Read the article

• Large file copy from NFS to local disk performance drop

  - by Bernhard

  I'm trying to copy a 200GB file from an NFS mount to a local disk. The local disk is an XFS filesystem on a LVM on top of a RAID 5 system (hardware RAID controler). I'm using rsync to monitor the transfer speed. At the beginning the IO speed is about 200MB/s, stable for the first 18GB. But then the performance drops by a factor of 10-20 and never recovers to the initial rate. Sometimes it reaches about 50-100MB/s but just for a few seconds and then the process seems to hang for a bit. At the same time all file-stat operations on the target filesystem are blocking for a long time (minutes). Also interrupting the copy process blocks for several minutes, a sub-sequent delete of the partly copied file takes also several minutes. Any ideas what could be causing this?

  Read the article

• Deleting pagefile.sys on shutdown

  - by Daniel E. Shub

  I have a Windows XP machine (it is a VM running in Xen) that I would like to backup. I have enabled ClearPageFileAtShutdown by following MS KB 314834. If I cleanly shutdown the XP machine and then mount the drive in another machine (which is trivial since the machine is virtual) I still have a large pagefile.sys. I was hoping that enabling ClearPageFileAtShutdown would result in a pagefile.sys with a size near zero. I have two questions. First, is it possible to have pagefile.sys be deleted, or have a drastic size reduction, at shutdown? Second, can I exclude pagefile.sys from my backup?

  Read the article

• Mounting both /dev/sda and /dev/sda1 - how can this be?

  - by itsadok

  I work on an Amazon EC2 instance that somebody else set up. We have an EBS volume mounted on /dev/sda, even though the root device is already on /dev/sda1, and we're also using `/dev/sda2' user@server:~$ mount /dev/sda1 on / type ext3 (rw) ... (snip) /dev/sda2 on /mnt type ext3 (rw) /dev/sda on /vol type xfs (rw,noatime) ... This doesn't seem to fit with what I know about the way /dev/ works. How is this possible, and more importantly: will this cause trouble in the future? I'm running ubuntu 9.04 jaunty.

  Read the article

• How to tell if linux disk IO is causing excessive (> 1 second) application stalls

  - by noahz

  I have a Java application performing a large volume (hundreds of MB) of continuous output (streaming plain text) to about a dozen files a ext3 SAN filesystem. Occasionally, this application pauses for several seconds at a time. I suspect that something related to ext3 vsfs (Veritas Filesystem) functionality (and/or how it interacts with the OS) is the culprit. What steps can I take to confirm or refute this theory? I am aware of iostat and /proc/diskstats as starting points. Revised title to de-emphasize journaling and emphasize "stalls" I have done some googling and found at least one article that seems to describe behavior like I am observing: Solving the ext3 latency problem Additional Information Red Hat Enterprise Linux Server release 5.3 (Tikanga) Kernel: 2.6.18-194.32.1.el5 Primary application disk is fiber-channel SAN: lspci | grep -i fibre 14:00.0 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter (rev 03) Mount info: type vxfs (rw,tmplog,largefiles,mincache=tmpcache,ioerror=mwdisable) 0 0 cat /sys/block/VxVM123456/queue/scheduler noop anticipatory [deadline] cfq

  Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >