Search Results

Search found 9417 results on 377 pages for 'tablet pc'.

Page 129/377 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

• Any way to get back Chrome's Dialog box for cache clearing instead of the new tab?

  - by Stuart P.

  As of today's release of chrome (Tuesday, March 8, 2011) on both Mac & PC the settings are now in a tab (chrome://settings/advanced), needless to say when you're clearing your cache very frequently (cmd-shift-delete on mac, cntl+shift+delete on PC) it's quite tedious going back and forth in tabs. The click & clean chrome extension doesn't have a mac counterpart (plus I like the keyboard much more than the mouse). I've searched and have yet to find a way to get a dialog box instead of the new tab.

  Read the article

• Mouse Hang with voltage fluctuation

  - by user265495

  I bought a new assembled PC about a month ago, but for the past 7 or 8 days I found my mouse cursor hangs every time there is a voltage fluctuation on my UPS (I guess it as when sound comes from ups then mouse hang for 2 or 3 sec. and them it goes normal again). My PC also seems to shut down while I'm working and it refuses to boot again - I end up needing to switch off my UPS and press and hold the power button for 30 seconds. It will then boot as per normal. Could the trouble be with my PSU? Am I potentially damaging my computer by pressing and holding the power button? I have : Motheboard : intel Chipset Model - DH61WWAAG23116-303 Processor : Intel Core i3 3.20 Ghz RAM : Zion 4 gb DDR3 HDD : 1 tb GRAPHICS : 2 gb NVIDIA GeForce GT-610 CABINET : Frontech Rock OS : Win 7 32 Bit

  Read the article

• Configuration Of modem/router to Telnet IPV6 addr

  - by vito

  Can any one help me to configure the modem/router, so that IPV6 address assigned by modem/router to Pc. I should telnet to that IPV6 address so that i can open the modem/router administration user interface. Now I have enabled the IPV6 in my PC, i am getting a IPV6 address from Modem/router. But not able to telnet to IPV6 address given by modem/router. It is possible to telnet to IPV6 address given by modem/router. I have tried it before. But now i have forgotten the configurations. Configuration snapshot has been attached. Thank you. configuration snapshot

  Read the article

• Apple Wireless (aluminium) Keyboard on Windows

  - by Dave Arkell

  I have an apple wireless keyboard which I am using with my windows pc and it works excellently, and looks superb. It all connects fine (particularly with a flashed dbt-120). However, I haven't had great success with getting all those useful keys to work with the 'fn' key. I've been using uawks as a way to get it working, but it doesn't always work. Has anyone had success with any other tools to get the fn key working (and therefore creating shortcuts to 'End', 'Home', 'Break', 'Pgup', etc? I should point out that this is not a mac computer, it is a plain old pc.

  Read the article

• win2003 server problem

  - by Tavo

  I used to have a server with win2000 OS. Yesteday I updated it to win2003 server R2 service pack 2. My problem now is that in a particular moment nobody can access the server. All of the shared resource of the server are unavailable. The only solution is to restart the server although the server is running fine. I don't think that is a connection problem of the LAN, because with the win2000 this problem didn't happend. The PC is connected to the same switch and the PC have the same exact hardware.

  Read the article

• HP Wireless Printer not working

  - by Omri Spector

  I have installed an HP DeskJet 4620 driver on a win 7 machine. All works perfectly for several days, and than printing is not longer possible. Instead I get the message: "Unable to communicate with printer". This happened on every Win 7 PC I tried, and none of the HP/MS sites contain any relevant info... (Posting this so that the answer appears online, as I did solve it after much work) Solution: It appears that HP installation puts a unique "port" called "HP Network re-discovery". It stops working after some time (possibly after the first time the printer/pc enter sleep mode). BUT, the standard MS TCP port works just fine. So: Go to "Printers" Right click Printer Click "Printer properties" and then "Printer" or "Fax" (for both - do all this twice) Click "Add Port..." Select "Standard TCP Port" Fill in details Move printer to use the new port by un-checking the old one and checking the new one Happy printing.

  Read the article

• How to nmot show any prompts when inserting a USB drive in Windows?

  - by jasondavis

  1) I just found a really interesting program that allows me to use a USB drive as a windows login key. It is called Rohos Logon Key. IF I remobve my USB drive/key from the PC then I can have the PC lock or hibernate or any other option, I have been looking for such a solution for many years but never knew one existed until this and it works much better then I imagined. I do have a couple minor issues though (im using Windows 7 pro). When I remove and then re-insert my USB key, windows prompts me with this dialog here... Generally when I get this I just click on "Continue without scanning" however I am looking for a solution to just make it not even show this at all, is it possible to disable it from showing? 2) I also get this dialog as well when I insert USB drives/key... Would it be possible to not show this as well or have it pick an option by default or anything really?

  Read the article

• Sending an email when an application crashes?

  - by Jay Kominek

  I've got a big piece of scientific equipment which is hooked up to, and controlled by software running on a Windows PC. Unfortunately the software, provided by the manufacturer, crashes occasionally when nobody is there to watch it. We'd really like a piece of software which could watch the application, and when it crashes, send out an email right away. Is there anything out there like that? EDIT: we want to monitor the application, which is a normal piece of Windows software, running on the PC. The mention of the equipment was just sort of background to explain why we cared.

  Read the article

• Possible HDD malfunction. Need help in diagnosing

  - by Protheus

  Today when using my PC as I did for almost 4 years I experienced the following: during opening new tab in Opera browser screen froze. Music (AIMP 3) continued to play for about 5 minutes and then stopped too. I tried Ctrl+Alt+Del, but win7 lock screen didn't appear. Caps\Scroll or Num locks didn't switch diodes on keyboard. I rebooted my PC and saw that BIOS suggests me to enter it's settings or load by default. I chose default. It don't see proper boot device (old faitful "insert proper boot" something). After second reboot it said that there is no ExpressGate installed (which i turned off in BIOS years ago). I went into BIOS setting to turn off ExpressGate and see configs: time was not set off, all hard drives present, temp and O.C. settings are nominal (no O.C.) I've inserted my Win7 install disk to try recovery. It did load awfully long (about few minutes) and didn't see current installation. PC was utilized in 24/7 mode for almost all these years. Hardware configuration: ASUS P5Q WS Core 2 Quad Q9300 (2.5GHz no O.C.) MSI geForce GTX 460 4x2 Gb GeIL EVO 2 (AFAIR) Seagate something 750Gb (4 years as system HDD 24/7) WD 1Tb (for random stuff, 5 y.o.) Hitachi 500Gb (for even more random stuff, 6 y.o.) NEC DVDRW (ALL DISKS ARE SATA) Cooler Master Silent Pro 700W Software: Windows 7 AND Kubuntu on the same drive with GRUB loader. Sorry I can't remember HDDs and can't see them right now, but I think their models aren't relevant anyway. My idea is that due to some system error or hard drive glitch i've wrecked my primary HDD's MBR. Nevertheless I don't exclude the possibility of other failure. May it's be that motherboard or it's SATA controller? Doubt it, because all drives are seen in BIOS and I could load from DVD. Maybe GRUB got bugged somehow, although I don't see how it's possible from Windows. But I did install KUbuntu from Windows (i wasn't myself then), maybe GRUB did write itself in some windows partition and got rewriteen in process? Right now I am at work with my flash drive with me and I need some advice how to fix MBR or to hear if it's not MBR. I'm going to buy new HDD (Hitachi 7k2000) because I think that my current HDD is compromised and it's unsafe to use it as system drive, especially 24/7.

  Read the article

• Dying SanDisk Memory Stick Pro Duo

  - by Different55

  I have a Memory Stick Pro Duo and after attempting to delete the largest file from a Mac the stick has become unusable. I can almost access it. When I put it in my PC I can open/delete/copy/paste/rename/modify one file/folder, then it can't detect the card. If I reinsert the card I can move on to the next file, but this is really annoying and my PSP won't read it at all. The memory card access light will flash for a really long time before it says that every file is corrupted. When I have tried to format it with either the PC, PSP, or a camera that uses a memory stick pro duo, it fails. I've tried with all the different options on windows, I tried formatting it through CMD, but nothing I have tried works. Should I copy every file off one by one or is there a way to fix it?

  Read the article

• Computer hanged in the middle of bios flashing process

  - by Stalker

  I have a laptop: Toshiba Satellite c660-17j, today I decided to update BIOS. I've downloaded bios updater from manufacturer's web site, and in the middle of flashing process computer hanged. I was waiting more than 30 minutes, but nothing was changed on the screen, i've tryed to PRESS MORE BUTTONS, but there were no reactions, so i've turned it off by removing battery (all other methods failed, even pressing power button for ~10 secs). After that computer can't start. I understand, that there's MESS in BIOS chip, and it's possible to re-flash it with hardware programmer, but I don't have it. I remember, that on some PCs (even on my eeepc) there was possibility to re-flash bios by inserting usb flash-disk (with .dat file on it, which contained BIOS), and power on PC, while holding some keys combination, then PC was switching to BIOS programming mode and re-flashed BIOS, after that it was possible to boot up normaly. Is there a way to recover computer without hardware programming BIOS chip? p.s. sorry for my english.

  Read the article

• Partition table damaged

  - by emaster70

  Hello, I'm currently in a terrible situation with my hdd: I was trying to install an OS side by side with my windows 7 x64 and I used the Paragon Partition Manager feature made for that. It disabled/hid/(damaged?) one of my partitions and now I can no longer access it. The partition, unfortunately, contains data I need to access urgently and I've got no backup. To complicate things even further I don't have another PC (I'm writing this msg from my iphone) and all I can rely on is a backtrac 4 disk (wkn't connect to my wifi, gets stuck obtaining IP address) and. Windows 7 x64 disk. Booting into windows fails with the pc hanging on the starting windows screen. Safe mode won't work either. Is there anything I can do? Here's the layout of the disk: Recovery partition Win partition Unallocated space (it's supposed to be my data partition) Other os partition (don't care about that, the installation of the other OS failed) Please help me, I'm desperate.

  Read the article

• Is it possible to host a web server from behind a NAT

  - by iamrohitbanga

  My PC is behind a NAT router that has a public IP address. If I want to host a website then I believe I need a domain name which I can purchase from some site which would pledge to resolve all DNS requests for that domain name and send the IP address of my NAT router (assuming I do not want to host my domain name on their servers). Now I want to host a web server on my computer. What changes should be done to the NAT router's configuration to forward all HTTP requests for example.com to my PC in the internal network. Is the above strategy correct? Is it commonly used?

  Read the article

• Mac OS X Lion (10.7.3) Virtual Machine?

  - by Ben Hooper

  I have been looking into this for a while and have attempted quite a few "solutions" (hackintosh boot images, universal unlockers, etc) before I gave in and asked for help. I know this is extremely difficult to accomplish, especially with an AMD CPU, but it has been done and it can't hurt to ask. Question Does anyone know of any way to actually get Mac OS X Lion (10.7.3) to boot in VMware Workstation 8.0.2? I know that Mac OS X is heavily dependant on hardware configuration, so I will post my PC's hardware below, if it helps. As far as I know it's only reliant on the CPU, but I will post it all just in case. PC Hardware Motherboard: ASUS M4A77T CPU: AMD Phenom II x4 955 Black Edition Graphics Card: Palit Sonic Platinum nVIDIA Geforce GTX 460 Memory: G-Skill [RipjawsX F3-12800CL9D-8GBXL] 8GB PSU: Arctic Power 700(W) Hard Drive: SAMSUNG HD204UI 2TB Thanks in advance. :)

  Read the article

• Changing the IP address with a name [closed]

  - by fede

  I have a web server (xampp) in a particular PC running on my LAN, and I added the following line in the 'hosts' file : 127.0.0.1 mysite. Then, in another PC connected to the LAN, I'm trying to acces the previous web server by typing 'http://mysite/index.php' on the web browser, with no luck. But if I type the IP from the server computer (http://192.168.2.87/index.php) I am able to access the web site. So, what should i configure so when i type 'http://mysite/index.php' I get the same result as http:// 192.168.2.87/index.php ?? Thanx!

  Read the article

• Establish direct cable connection between Windows 8 PCs in home network

  - by Marie. P.

  I'm running two PCs, a desktop and a laptop with Windows 8 Release Preview ("Build 8400"). They are connected to the same router in infrastructure mode, thereby having wireless internet. Due to often file synchronization between the machines I want to establish a cable connection that allows direct file transfer, without needing to use the wireless. When I plug in the cable (normal, not cross-over), I see in "Control Panel\Network and Internet\Network Connections": "Ethernet - unidentified Network" on both PCs. Transferring a file between both still only uses the WiFi via the Router. I noticed that when turning off the wifi on one PC, I can set up a shared internet connection that will work via Ethernet-cable, but since sometimes only one PC runs, sometimes the other one, I do not want to have the internet of one machine to be dependent on the other one being switched on. I do not have a crossover-cable, but since I did connect the PCs already successfully (just without both being on the internet), I'm sure that this should also work with a normal ethernet cable.

  Read the article

• Test wireless speed?

  - by ULTRA_POROV

  Is there an utility that can test the speed between my pc and the wireless access point i am connected to?

  Read the article

• Question regarding IPv6 - Solicited-Node Address with a Link local scope

  - by Pulse

  Situation: A small LAN comprising a Windows 7 Ultimate x54 PC, 2 XP Pro x86 PCs and an Asus router.The Win 7 box has IPv6 enabled. There are no other IPv6 enabled devices on the LAN. In my firewall I see numerous requests originating from the Win 7 PC, which are for the Multicast address ff02::1:ff.... which is a Solicited-Node address query and has a scope of 2 which equates to the local link. As far as I knew local link addresses are filtered by routers, hence local link. Given that situation I'm wondering why I'm seeing these queries being generated to various addresses? Any ideas? Thanks.

  Read the article

• Lenovo G500 Re-booting failed

  - by Sune

  I have a Lenovo G500. Yesterday it asked me to reboot the system. I did. Now it wont come back on. I have tried everything I read online like taking out the battery and holding the power button in for 20 seconds, then switching on the pc with only the ac adapter plugged in. I still only see the backlight of the pc, nothing else. I also tried to hold in the Fn key and tried all other F keys (F2, F12, etc.) I also pressed that little button next to the power button, but nothing is responding. Please help.

  Read the article

• nginx + IIS + GET

  - by Eralde

  I have nginx on pc "A" & IIS with ASP.NET on pc "B". nginx is configured like this: ... location ~ ((Web|Script)Resource.*)$ { proxy_pass "B"/$1; proxy_redirect off; proxy_set_header REMOTE_ADDR $remote_addr; proxy_set_header REQUEST_URI $request_uri; proxy_set_header HTTP_REFERER $http_referer; #proxy_set_header REQUEST_URI $request_uri; proxy_set_header QUERY_STRING $query_string; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; }... but requests to "B"/WebScript?a=b&c=d aren't able to deliver GET data (a=b&c=d) to IIS part. Could anyone help with this?

  Read the article

• If a change the CPU, must I reinstall the OS?

  - by dag729

  Hi, as suggested by the title, I want to change CPU: actually I have two computers, one with Ubuntu running on an AMD Athlon 64 dual core 5200+ and the other with FreeBSD running on an AMD Sempron single core LE-1250. I would like to swap (I am not sure that this is the correct term...) the CPUs from one computer to the other one, that is take the dual core from the ubuntu pc and put it inside the freebsd pc and viceversa. The mobo is the same. Do you think I will encounter problems?

  Read the article

• windows 8 on macbook locks after 2 mins despite high performance settings

  - by Mark

  I am running my Macbook Prop as a Windows 8 machine using bootcamp and for some reason, when I leave the keyboard/mouse alone for 2 mins it locks the PC (i.e. goes to the lock screen). I have (of course) checked the power settings and I can assure you that it is not set to these settings. I did notice that when I added my work's Mail Account the computer asked me to accept some group policy settings, which I did, so I suspect that this is a group policy setting, but I cannot find it. Can someone help? P.S. I have searched these forums first, and this is different to the PC going to sleep once locked, this is locking while logged in after 2 mins. Thanks.

  Read the article

• howt setup remote access into computer behind 2 routers?

  - by Steve Wasiura

  I can setup remote access to a pc behind a single router/firewall by using NAT and Port Forwarding, simples! But there is a customer that shares an internet connection with another office, and they are behind a second router firewall. I drawed a picture with my crayons but I can't attach it because I'm a new account on SF. see it here: http://i.imgur.com/b3FDx.png So how would I setup remote access to the pc that is beind the second firewall? It must be something about static routes, i.e. if I hit the wan ip on port 4905 I want it to forward it to 10.0.0.30 by going through 192.168.1.10 so a route statement like for all requests to 10.0.0.30, use 192.168.1.10 ? and ass u me router 2 has a static gateway ip of 192.168.1.10 and need a standard NAT on router 2 to point port 4905 to 10.0.0.30 is this the right way, any tips? both routers are netgear consumer equipment. thanks

  Read the article

• Win XP cannot connect (or see) my wifi network, but can see others

  - by Jorre

  since yesterday I have a strange wifi problem with my pc. I have a wireless linksys router setup that worked fine for many months, now since yesterday my pc won't connect to the wifi signal anymore. The strange thing is, my macbook pro still connects fine. SSID is broadcasting, but my windows XP doens't see it, I have all signal modes set to "auto". Windows XP sees all my neighbours wifi networks, so the wifi card isn't broken or anything. Any idea what can be wrong here?

  Read the article

• Connect a Sitecom WL-174 to another wireless router

  - by Thijs Wouters

  I used to connect via a Sitecom WL-174 directly to ADSL internet. There were some pc's which connected wirelessly and some connected with a wire. Now we got another provider and we need to use the router which came with it. It is also a wireless router. It works perfectly. But I need to connect the other pc's which were connected with a wire previously. Is it possible to connect the Sitecom router wirelessly to the other router? If so, how? Thanks.

  Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >