Search Results

Search found 6301 results on 253 pages for 'cd man'.

Page 130/253 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• Severe graphics and application problems after update

  - by jenald

  I wanted to upgrade from 11.10 to 12.04 with the built-in upgrade-feature. but during the upgrade my pc stopped working. When I restarted my PC Ubuntu starts OK, but with many errors (many apps don't work and some graphic-errors). I try to upgrade again to 12.04, but I can't, because my Ubuntu identifies itself as 12.04. I tried to upgrade with the cd-setup but this also doesn't work. What should I do, if I don't want to reinstall the whole system?

  Read the article

• Ubuntu 11.10 not showing up in GRUB bootloader after update and restart :(

  - by beginer

  I was using ubuntu 11.10 with gnome-shell. I installed various useful softwares and ran system update using update manager which ran smoothly and asked me to restart my comp at the end. I restarted it to find that Ubuntu entries were missing from the GRUB bootloader and only memory test and windows are showing up. I took a lot of pain in installing various important softwares and cannot afford a re-installation. Tried to boot from the live cd and installed boot-repair and after running it .. it wasnt working properly .. it was just showing that it was "scanning systems" for more than an hour. Kindly help. Thank you ..

  Read the article

• Ubuntu doesn't boot after upgrade

  - by Hugtrw

  I updated to 12.10 and the OS will not load. I used the boot repair cd, and the only thing that works is the monodeset option in the kernel and the graphics are terrible, mouse disappears and unity will not load. Ubuntu 12.04 ran great. On a clean install of 12.10 Ubuntu wont even load to install unless under using monodeset. I get left a terminal like screen with just a blinking bar. I'm using a HP Compaq NC6400 Laptop, Ubuntu 32-bit, 2gb ram.

  Read the article

• Ubuntu 12.04 installer does not recognize Windows 7

  - by trainofk

  I recently purchased an ASUS N56VZ-ES71 laptop which came with Windows 7 Home Premium installed on it. I wish to dual boot Windows 7 and Ubuntu 12.04 on it. I shrank the hard drive partitions to leave about 150 GB unallocated for Ubuntu 12.04. When I boot the Live CD of Ubuntu and attempt to install, the installer does not recognize any other operating systems. Through reading a few questions, I have found that this is due to a GPT partitioning table that Windows uses. I ran boot-repair as per other threads' suggestions. This was my output: http://paste.ubuntu.com/1176988/ I suppose my question is: how do I proceed in order to get the installer to recognize Windows, so that I don't have to erase the current partition table and can get a safe install? Thanks in advance.

  Read the article

• Blank Screen on 12.04

  - by stupidwhiteguy

  Can hit Ctrl-Alt-F1 and login but no fixes work. Tried nomodeset and everything else appears to have upgraded but can't see anything. I really need this computer to work. It is an old Dell with 1.6 processor with old school monitor. I don't know why people are giving my question negative votes. If you know how to fix this, then please help me, as I have read and tried all the solutions that I've found. Just for the record reformatting is not fixing it, and I can't get a boot CD to load either. If you know how to use the blank screen fix tutorial, please explain cos I'm lost. Most people don't understand this stuff and an easy "how-to" fix would be nice.

  Read the article

• ethernet problems in ubuntu 12.04

  - by h4x0rj3ff

  so today i popped out my hdd with ubuntu on it and put in a fresh hdd and installed win8 (wanted to try it). i got everything installed, upp and running and decided to go back to ubuntu (for obvious reasons lol) but when i boot back into ubuntu my internet connection will not connect. i booted into a live cd of ubuntu and it still would not work. i thought i blew up my onboard port so i booted back into win8 and the internet worked without flaw. so i booted back into my ubuntu install and i have a usb to ethernet adapter that im using but i still cant get my onboard to connect. any ideas?

  Read the article

• Can't boot into ubuntu 12.04, grub menu wont show

  - by Marcus

  Today i downloaded the ubunto 12.04 64bit and installed it on a 115gb partition next to a 15 gb swap alongside windows 7. (I have 2 drives. One with only windows (500gb) and another with a partition for (250gb) windows and (115gb) the ubunto and (15gb) swap partitions.) But after the installation i can't find out how to run ubuntu. It just run windows. I read that it should show a grub menu. i tried: Holding both shift keys at boot up. Running the cd-ubundu and edit the grub file. Also pressing the esc and some funtion button during boot. Nothing seems to work.

  Read the article

• How to check if my installation of ubuntu is alright?

  - by Likhon

  I recently changed the size of the partition that contained my Ubuntu installation using gparted from a live CD. I also moved it from one place to another. It was my first time and I hit the cancel button during my first try. I completed the task in my second try. But now I see that the size of the "computer" folder has shrinked by 2GB. Now I want to know if the system files are alright as I have backed up my files from the home folder before. How do I do that? Thanks in advance.

  Read the article

• Stucked in the grub command prompt

  - by user903645

  I have a windows xp os, and I ve decided to give ubuntu a shot. I installed and It when rebooting it did boot by default windows. I red several forums and after entering those commands: sudo mkdir /mnt/ubuntu sudo mount /dev/sda2 /mnt/ubuntu sudo grub-install /dev/sda --root -directory=/mnt/ubuntu after rebooting the system showed me the command grub. And I cannot get anywhere. I don t have a windows cd to fix anything. so how can I launch windows from this command grub? Thanks... I am in a real mess.

  Read the article

• Problems while installing Ubuntu 12.04 64 & 32 bits from LiveCd

  - by user76104

  I am trying to install Ubuntu on my new pc but I am encountering problems. When I boot from the installation CD, everything runs fine until the "window" when the user has to decide to Try Ubuntu or Install it in the machine. Well that "window" appears in blank, and my mouse and keyboard behaves really slow. I can't do anything , so i have to shut it down by pressing power button. The specification of my pc are this Motherboard: Gigabyte ex58 ud7 CPU: i7 950 HD: Western digital caviar black Int. memory: 6gb memory corsair Graphics: evga gtx580 I really need to install Ubuntu or another Linux distribution, i am using de seismic Unix program {Edit : Guess it is this} on my laptop. I hope someone can help me.

  Read the article

• how to install EasyBCD on ubuntu 11.10

  - by Kriti

  I want to delete ubuntu 11.10 from dual boot system(windows 7 + ubuntu 11.10). I currently have ubuntu as main OS but I don't want to continue with it further.I don't have CD for win 7 so I am trying other sources. I have downloaded EasyBCD on another system and pasted it on ubuntu. It is .exe file and is not running on ubuntu. I am not aware of any commands regarding installation and further process. :( So,pls suggest what to do next,I would be very thankful. :)

  Read the article

• How to Dual Boot Windows 7 and Ubuntu 12.10?

  - by user108329

  So firstly I tried to install Ubuntu, from the website to run alongside Windows. Went through Wubi etc. Asked me if I wanted to try or Install, I selected install. I selected option to run alongside Windows 7 but when it was partitioning it failed and I only had the fresh install as an option as probably Windows became corrupt then? So I installed Windows again, ran Ubuntu from the livecd, went into gpartition, didn't really know what I was doing but anyhow, resized a partition which was 698gb, one was 100mb, I guessed CD drive. Gparted said it was gonna take three hours, so I took that for meaning Windows was corrupt again. Your help is greatly appreciated. Thanks

  Read the article

• Ubuntu not selectable in boot menu

  - by user113630

  Im trying to dual boot windows 7 and Ubuntu 12.10. i created a partition in windows 7, booted the Ubuntu cd, installed Ubuntu and created a swap space(following all instructions detailed in various video tutorials). after restarting and taking out the disk my computer boots directly into windows. also, in the boot menu where you select what os to boot, Ubuntu doesn't show up, just windows 7. i didn't want to screw around with any settings and figured the community could figure out my problem faster than i could :p any help is greatly appreciated!

  Read the article

• ASUS VX-6 Laptop Wireless not connecting

  - by user2152790

  Someone posted a script a couple days ago, here is my output.Pastebin I can see wifi SSIDs in network, but cannot connect to mine. The only time wifi worked on 13.10 was in the Live CD, but wifi stopped working as soon as install process started. Did below but made no difference. sudo apt-get install bcmwl-kernel-source sudo modprobe -rv brcmsmac sudo modprobe -v wl What I do next? I tried Software&Updates and it showed 1 proprietary driver in use. This sounds like a WPA/WPA2 issue? Wifi works when I tried Zorin OS 7.1, wifi always worked in windows 7.

  Read the article

• Problem installing Lubuntu 11.04

  - by anyhelpisapreciated

  After I boot the Live-CD I can't select try Lubuntu or Install Lubuntu and I end up hanging on that screen. My PC specs are: Compaq Presario s4214bd 2.4ghz Intel Celeron. Windows XP/Ubuntu 10.04 dual boot. 768mb Ram. Nvidia 6200 Graphics card (I've switched between the onboard and PCI(this one) still no luck). I really want to use Lubuntu and I've been trying everything for the past 2-3 hours. Anything will help.

  Read the article

• Ubuntu crashed during the update to 12.04, not I can't recover my files, help please

  - by mrah

  I'm pretty new to Linux and I've only installed Ubuntu as I couldn't afford to buy Windows, worked well and I liked it. But I chose to upgrade it to the newest version after a prompt. The update froze and the machine was unresponsive which forced me to hard reboot it. Now nothing seems to load and I've reached my wits end (mainly cos I'm lost in all the command lines). I've decided to try and recover my data from the hard drive, only two folders, by selecting the try Ubuntu option when I insert the OS CD into the machine. The problem I'm experiencing now is it won't let me copy my folders, I get a 'The folder contents could not be displayed. You do not have the permissions necessary to view the contents of "folder_name".' Does anyone know how I can recover this data?

  Read the article

• ASUS U24a can't boot without live disk

  - by user98965

  I recently picked up a new ASUS U24a while travelling in asia. I've managed to go through hell with the UEFI setup, and finally now have a working GRUB. However, I can't manage to get past the "Loading initial ramdisk". If I boot the live CD-USB (only in BIOS legacy mode), I get a wonderful, working Ubuntu. I finally managed to get UEFI installed on the hard-drive (no option for legacy BIOS boot, or I'd be there in a flash!), and can boot in UEFI mode into GRUB2. But... I can't manage to get past the "loading initial ramdisk". It appears that the disk drivers are failing (there is no disk activity after this point). Ideas? pastebin from the boot-repair is at: http://paste.ubuntu.com/1290011/ best, -tony

  Read the article

• How do I get my Mac to boot from an Ubuntu USB key?

  - by user11621

  If you select "USB" and "Mac" on this download page, it gives a series of command line instructions to make a USB key which the MacBook will boot into Ubuntu from. I've followed them to the letter two or three times on different USB keys, and it doesn't work. There's a very great deal of technical discussion about EFI etc. but this set of instructions seems to suggest it should just work, but it doesn't. Help? I'm increasingly unhappy with the more locked-down approach Apple is taking, and I'd quite like to start using Linux with a view to transitioning over to using it as my main operating system, but booting from the CD takes forever, runs slowly and I'm really hoping to get it moving off USB. Can anybody help me?

  Read the article

• updating from 8.04 to a newer version?

  - by user175802

  I have an old system. It doesn't have a DVD drive, and I think the cd drive is a bit wonky. The only disk that I have been able to get to install is an old (official) 8.04 Kubuntu disk. No disk that I've burned on a few systems works. They check out, but they don't seem to survive the install (another issue). I thought once I got a version on that I could update over the web, but no luck. It appears EOL. No updates seem to be available, or software to install. Is there a way? I'd like to get it to as new a version as possible. The next step would be to pull the drive and get a new one, but I'd rather not.

  Read the article

• How can I fix a very broken Ubuntu installation without losing data?

  - by jredkai

  Okay guys, I was installing a program (I do not remember the name). When I did sudo apt-get update I was given missing dependencies. It told me to sudo apt-get install -f which deleted just about every dependency needed for Ubuntu, now I cannot log in or anything, now in GRUB it actually says Debian instead of Ubuntu. I have tons of important data in that partition. Can I some how use the live cd to fix this problem??? I mean like re-install without losing data. Any help is greatly appreciated!!!

  Read the article

• Machine check error on ASUS while booting from USB

  - by user100453

  I put the last Ubuntu iso on my USB stick using UNetBootin, after formatting it to fat32. I've already done that before with other operating systems and it worked. I can't actually boot Ubuntu from USB since I get a black screen with the error "Machine check error" on top the an automatic reboot happens. The error appears right after the boot, I can't see anything else before. I'm using my ASUS X54L latop. Does anybody know how to solve this? Installation from CD/DVD works.

  Read the article

• creating extended partition

  - by SidhuHarry

  this is my current hard disk status(Running linux Mint LIVE CD) i have- Ubuntu 12.04 on 206 GB partition at dev/sda1. dev/sda2 system reserved. Windows 7 on 90GB partition at dev/sda3 and linux swap in extended partition. what i want to do- I want to install Linux mint KDE on my system for that i want to create a new partition of 30GB(by shrinking the free space available at dev/sda1), i can't create that because i can create only 4 Primary partitions which are already there. so do i have to delete the Swap partition? and if i did how to force Mint KDE and Ubuntu 12.04 to use/share same swap space in new logical partition?

  Read the article

• Problem after upgrading from 11.10 to 12.04

  - by Veena Kumari

  I had installed Ubuntu 11.04 through CD alongside windows. I got a problem here in upgradation when I upgraded my Ubuntu 11.10 version to 12.04.There were many errors too while installing upgrades.. The package got broken. After restarting the computer,It should appear Ubuntu 12.04,even here It is appearing ubuntu 11.10 with four dots just moving one by one and does not proceeds further,hangs here!! Windows is running fine,I restarted computer many times,plugged out the charger...Nothing is working. How to solve this issue?? I'm not a very frequent user of all this.. Please guide me...

  Read the article

• How to avoid problems when installing Ubuntu and Windows 7 in dual-boot?

  - by BlaXpirit

  I want to try out Ubuntu (and hopefully choose it as my primary OS). After looking at many versions of it in VirtualBox and from Live CD, I've finally decided to install it. So I defragmented and shrinked one of the partitions to make room for Ubuntu. My current setup (after shrinking the D: partition): [·100 MB·] [······250000 MB······] [·······600000 MB·······] [··100000 MB···] Reserved Windows 7 system (C:) Data (D:) Free space NTFS NTFS NTFS (for Ubuntu) The Internet (including AskUbuntu) is full of scary stories about Windows not loading after installation of Ubuntu, something about installing GRUB to a wrong partition, etc. As I am a newbie to Linux and Ubuntu, it is very easy for me to do something wrong. Please mention the problems that may appear and explain how to avoid them. Ubuntu version that will be installed: 10.10 Desktop amd64 Please note that I have installed Windows 7 about a year ago, so I have much to lose if something goes wrong. I want to be very careful because there is no way for me to backup all the data.

  Read the article

• nVidia GT 220 not working properly with Ubuntu 12.10

  - by Glaedr

  I used to enable proprietary nVidia drivers on every previous Ubuntu release to get it working properly (elseway I was forced to a very low resolution and no graphic acceleration), and everything worked fine then. In particular, I noticed - still I don't know why - that the GPU fan on every OS gets noisy until the video drivers are loaded (runlevel 5, it seems, in Linux), and then slows down to a normal speed. Today I installed 12.10. Running the Live CD, surprisingly, everything was working fine: full resolution, acceleration, silent fan, and so on. The running driver was nvidia-current (GT 216). After installing and booting I found that the fan was overrunning. The installed driver is nouveau. I tried installing nvidia-current, or any other proprietary driver, even installing the kernel headers & source and then the drivers (as suggested here), but all I'm getting with proprietary drivers is, the irony, low resolution, noisy fan and no acceleration (thus obviously unity and compiz refusing to start). Does anybody know a way out?

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >