Search Results

Search found 4731 results on 190 pages for 'it stuck'.

Page 130/190 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• Exchange Full Access issue

  - by Benjamin Jones

  I was just hired as a System Admin for a small company. They use Exchange 2010 for their Mail Server. I've never had a permission issue like this with Exchange because I worked for a larger firm with less responsibility before. Their old system admin is LONG GONE, so I can't ask him what he did. The issue: Right now ANYONE can gain access to a mailbox and view the mail in the mailbox. This is disabled by default you say and you have to grant them full access ? You are right, but the old System Admin I guess didn't know what he was doing. SO right now user A can open up user B mailbox with out being granted permission. So here is what I found out. Every user in EMC Full Access Permission has Exchange Server group granted. Within the Exchange Server Group, Domain User's is a Member Of. Within Domain User's all user's are listed as Members. So my guess is because of this all users can access ANY mailbox? Well GOOD News. The company is small (35 people) and they are not computer savvy, so hopefully no one has figured out they can open anyone's mailbox.(From what I can tell no). Next thing I did was with my domain user in EMC, delete Exchange Servers Group in FUll Access Permissions and grant access to my user. I made sure that my memeber was apart of the Exchange Server Group. Went to our OWA site and now I don't have permission to my own mailbox. Re did everything to the way it was with my user and now I'm stuck. Any help? I would think granting a single user that is in the Exchange Server group, Full Access to that mailbox would enable them to open that mailbox???? I guess I am wrong.

  Read the article

• Apache RewriteEngine, redirect sub-directory to another script

  - by Niklas R

  I've been trying to achieve this since about 1.5 hours now. I want to have the following transformations when requesting sites on my website: homepage.com/ => index.php homepage.com/archive => index.php?archive homepage.com/archive/site-01 => index.php?archive/site-01 homepage.com/files/css/main.css => requestfile.php?css/main.css The first three transformations can be done by using the following: RewriteEngine on RewriteRule ^/?$ index.php RewriteRule ^/?(.*)$ index.php?$1 However, I'm stuck at the point where all requests to the files subdirectory should be redirected to requestfile.php. This is one of the tries I've done: RewriteEngine on RewriteRule ^/?$ index.php RewriteRule ^/?files/(.+)$ requestfile.php?$1 RewriteRule ^/?(.*)$ index.php?$1 But that does not work. I've also tried to put [L] after the third line, but that didn't help as I'm using this configuration in .htaccess and sub-requests will transform that URL again, etc. I fuzzed with the RewriteCond command but I couldn't get it to work. How needs the configuration to look like to achieve what I desire?

  Read the article

• How can I create a macro that acts on a relative reference rather than an absolute reference to cell A1?

  - by Bruce

  I have a master rent statement in an Excel 2007 (macro enabled) spreadsheet that shows all tenants in rows with columns formed by the months. Each tenant then has a separate rent statement sheet like the one below that pulls the data through from the master rent statement and all I do then is to copy the last 4 columns to the right and add them to the right, just renaming the month labelled as ‘rent due’ with the current month and then hiding the previous last 4 columns to the left so that the statement always shows the previous month's activity and the amount due for the current month: I used a macro to speed up the creation of these statements, but then found that in some cases the result was wrong and needed major correction because the macro use absolute references i.e. its starting position was relative to cell A1 whereas some of my rent worksheets commence from a different column and in some cases from a different column and a different row. I have tried recording the macro with 'Use relative references' but when trying to use the macro it only gets part way through its operation before it stops and the message appears: Run time error '1004' Application defined or object defined error with the option to End or Debug or go to Help and then I'm stuck as I don't know how to debug and work in VBA or understand what has gone wrong. I want to record a single macro that always remains relative to the last 'Total Due' column heading (in the sample, it’s cell FF3 but on another worksheet could be cell GA26) and thus enables me regardless of where on the worksheet the rent statement is placed to add through my recorded macro a further four columns with updated dates and a repositioned 'Total Due' summary (in the sample in cells FE23 and FF23). The contents of cells FE23 and FE22 are always the same number of rows from the 'Sample Rent Statement, Service Charge and Sub Total' rows. I've searched on the web and in the help files of Excel 2007 but have been totally stumped by this, so currently I have to re-record a quantity of macros each month to cover all of the permutations of the worksheets in my Excel rent workbook, which is starting to become pointless in terms of saving time. Does someone know a solution to this problem please?!

  Read the article

• PC in POST loop

  - by Antony Scott

  Hi, I have a custom built PC using a Gigabyte GA-EP35-DS3P motherboard with a Q6600 CPU. For the last 2 days it has got itself stuck into a POST loop. Saying that, I don't think it actually got in to the BIOS. It repeatedly lit up the LEDs and then not much more. Sometimes I could see the CPU fan twitch. Today I re-seated the DIMMs and it powered up straight away. Could this be a sign of an impending hardware failure? The PC is hooked up to a UPS, so I don't think it's a power spike or anything like that, as I have 2 other PCs on the same UPS and they're both fine. Yesterday, the first time this happened, I was getting a message which I think said "Scanning BIOS image on hard drive". I've been building and using PCs for well over 25 years and that's a new one on me! I don't think it's an over heating problem, as when the PC does finally boot up the CPU is running at 35-40C. Any help or suggestions would be greatly appreciated.

  Read the article

• Servers - Buying New vs Buying Second-hand

  - by Django Reinhardt

  We're currently in the process of adding additional servers to our website. We have a pretty simple topology planned: A Firewall/Router Server infront of a Web Application Server and Database Server. Here's a simple (and technically incorrect) diagram that I used in a previous question to illustrate what I mean: We're now wondering about the specs of our two new machines (the Web App and Firewall servers) and whether we can get away with buying a couple of old servers. (Note: Both machines will be running Windows Server 2008 R2.) We're not too concerned about our Firewall/Router server as we're pretty sure it won't be taxed too heavily, but we are interested in our Web App server. I realise that answering this type of question is really difficult without a ton of specifics on users, bandwidth, concurrent sessions, etc, etc., so I just want to focus on the general wisdom on buying old versus new. I had originally specced a new Dell PowerEdge R300 (1U Rack) for our company. In short, because we're going to be caching as much data as possible, I focussed on Processor Speed and Memory: Quad-Core Intel Xeon X3323 2.5Ghz (2x3M Cache) 1333Mhz FSB 16GB DDR2 667Mhz But when I was looking for a cheap second-hand machine for our Firewall/Router, I came across several machines that made our engineer ask a very reasonable question: If we stuck a boat load of RAM in this thing, wouldn't it do for the Web App Server and save us a ton of money in the process? For example, what about a second-hand machine with the following specs: 2x Dual-Core AMD Opteron 2218 2.6Ghz (2MB Cache) 1000Mhz HT 16GB DDR2 667Mhz Would it really be comparable with the more expensive (new) server above? Our engineer postulated that the reason companies upgrade their servers to newer processors is often because they want to reduce their power costs, and that a 2.6Ghz processor was still a 2.6Ghz processor, no matter when it was made. Benchmarks on various sites don't really support this theory, but I was wondering what server admin thought. Thanks for any advice.

  Read the article

• erratic response times with Apache 2.0.52 on redhat 4.

  - by Kevin

  Under load, we've noticed response times from Apache vary greatly for the same 7k image. It can range anywhere from .01 seconds to 25 seconds or greater. Unfortunately, due to corporate policy constraints we are pretty much stuck on Apache 2.0.52. I'm at best an Apache novice so I'm in over my head with this problem. My focus recently has turned to our choice of MPM modules. We use the worker model on a dual core hyper threaded blade. It doesn't appear that swapping is an issue, and I don't see any signs of a hardware problem. I've read that worker is optimal on hardware with many CPU's where prefork it more suitable for our specific hardware profile. I can see conceptually how choosing the wrong MPM could result in this erratic behavior, but I'm not confident that it's the root cause here. Has anyone else seen this type of range in your response times for simple static content? What else should I be looking into here?

  Read the article

• Exchange 2010 mail routing with Hub Transport in multiple sites

  - by jmreicha

  I have two separate physical sites, Site A and Site B. In site A, I have following: 2 CAS servers 2 Hub Transport servers 2 Mailbox servers 2 Edge servers In site B, I have the following: 1 CAS 1 Hub 1 Mailbox 1 Edge Currently everything is working out of site A. That is, all users are housed on mailboxes that are in site A and all inbound mail flow is pointing to site A. I would eventually like to be able to move some of the mailboxes to site B without causing a disruption for resliency and redundancy purposes but I am not quite sure how to go about setting this up or if it is even possible. So far I have created an Edge subscription in site B and am able to send emails out from test accounts set up with mailboxes on the site B Mailbox server. However, I am unable to receive incoming mail messages and am confused. So I'm thinking incoming mail messages are still being directed to site A and then they are getting stuck because there is no way to route the mail to the site B mailboxes. Is this assumption correct? I am unfamiliar with mail flow and routing so I am not really sure what I need to be looking at? Would I add the site B hub transport to the Edge subscription in site A? Or I guess more specifically, how would I go about enabling communication and mail flow between mailboxes split up on site A and B?

  Read the article

• Java constructor using generic types

  - by user37903

  I'm having a hard time wrapping my head around Java generic types. Here's a simple piece of code that in my mind should work, but I'm obviously doing something wrong. Eclipse reports this error in BreweryList.java: The method initBreweryFromObject() is undefined for the type <T> The idea is to fill a Vector with instances of objects that are a subclass of the Brewery class, so the invocation would be something like: BreweryList breweryList = new BreweryList(BrewerySubClass.class, list); BreweryList.java package com.beerme.test; import java.util.Vector; public class BreweryList<T extends Brewery> extends Vector<T> { public BreweryList(Class<T> c, Object[] j) { super(); for (int i = 0; i < j.length; i++) { T item = c.newInstance(); // initBreweryFromObject() is an instance method // of Brewery, of which <T> is a subclass (right?) c.initBreweryFromObject(); // "The method initBreweryFromObject() is undefined // for the type <T>" } } } Brewery.java package com.beerme.test; public class Brewery { public Brewery() { super(); } protected void breweryMethod() { } } BrewerySubClass.java package com.beerme.test; public class BrewerySubClass extends Brewery { public BrewerySubClass() { super(); } public void androidMethod() { } } I'm sure this is a complete-generics-noob question, but I'm stuck. Thanks for any tips!

  Read the article

• Using multiple USB webcams in Linux

  - by rachelderp

  Running more than one USB webcam in Debian/Linux results in the the following error: libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON: No space left on device What initially seemed to be a programming issue in OpenCV turned into a quest for a mysterious hardware/software problem after the same errors were produced by running cheese and xawtv. Apparently it's caused by webcams requesting all the available bandwidth on the USB host controller. With that in mind I decided to run wireshark and capinfos to see just how much bandwidth a single camera used. 4 megabits per second at 320x240 14 megabits per second at 640x480 32 megabits per second at 1920x1080 Interesting! That might explain why two cameras at 320x240 work but any higher resolution fails. It's as if my USB controller is only operating at USB 1 speeds, yet lsusb shows both webcams belonging to a device which supposedly supports 480 megabits per second. One solution proposed forcing the webcams to calculate their bandwidth usage instead of requesting their maximum by running the following commands: sudo rmmod uvcvideo sudo modprobe uvcvideo quirks=128 Unfortunately that made no difference, so I decided to try another solution. A post on StackOverflow suggested telling my webcams to use a lower FPS or compressed video format like MJPEG, but after running v4lctl list it doesn't appear either of my webcams support changing their video mode. And that's where I'm stuck. Why would two webcams operating well below the maximum speed of USB 2 would produce this error? ps: It's not a disk space issue, df displays no change when the webcams are started. pps: If it makes a difference, here's the output of lsusb

  Read the article

• Proper approach to debug PC startup problems (POST)

  - by saurabhj

  My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

  Read the article

• Is there a local yubnub.org replacement?

  - by Justin Keogh

  I use yubnub very often... every google search I do by just (in firefox) "ctrl-t" - (now in the url bar) "y g searchterms" [Enter] "y" in this case is a search keyword I added by right clicking in the yubnub.org command box it's really fast, and I just do it automatically now... but the problem is now I am stuck with whatever the yubnub command that I am so used to using does. I cant change it... for example, what if I dont want to use google... but I still want to use the "g" command to search? or say I want to use google's https search... ect... I suppose this would be kinda trivial to implement locally... but I would hate to re-invent the code if it's allready done and in use... ideas? Also a local yubnub.org replacement would save me the DNS lookup and traffic to yubnub.org. I dont expect to be able to import all commands from yubnub.org but that would be cool if possible.

  Read the article

• Computer Won't Boot Properly, unless in safe mode?

  - by Mr_CryptoPrime

  I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

  Read the article

• Hard drive causing BSOD

  - by JoshIrving

  I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

  Read the article

• How to fix high Load_Cycle_Count laptop drive (TOSHIBA MK6006GAH in Vaio TX1XP)?

  - by Sam Brightman

  Hoping someone knows exactly what's going on here. It seems this drive has some combination of aggressive power saving settings and Ubuntu defaults that has massively increased the Load_Cycle_Count for the drive: https://wiki.ubuntu.com/DanielHahler/Bug59695 So the drive is now so slow that it cannot boot because it takes long enough to access the data that the kernel will not recognise it properly. I'm not worried about the data on the drive, but would really like to keep the laptop functioning. There is some indication that this is possible because the figure is still low 200,000s and most drives supposedly go to 600,000. Additionally, SMART tests pass and consider the drive healthy and without errors. But the really surprising thing was when I ran mhdd... Every single read came up red (slow) until I pressed 'R' for reset drive. I noticed the next read was normal speed, so held down 'R'. Magically the drive read perfectly for as long as I held the key BUT resumed slow (and noisy) seeking/reading after releasing. I don't think the source code to mhdd is available, so I'm not exactly sure what this means (besides, I don't know enough low-level HDD stuff either). It seems like the drive should be able to work, but is stuck trying to power save or something. There are no BIOS options on the laptop. Does anyone know how I can stop the drive from doing extremely slow/noisy operations like this? Or is constantly resetting the drive also damanging, and only causing it to work well by luck (i.e. not a suggestion that it's fixable)?

  Read the article

• Grub Installation Failed: Fatal Error ... now what I do?

  - by eklavya

  I know there are some threads that touch this but I feel I have done something uniquely stupid. hence the post and plea for help. I am a beginner @ Linux. So I have a PC with a HDD (hard disk drive) and SSD (solid state drive) It was running Linux Mint /dev/sda1 - HDD Partition 1 - 2 TB (mounted this is /home /dev/sda2 - HDD Partition 2 - 1 TB (separate back up drive, i was backing up files to this) /dev/sdb1 - SSD Partition 1 - 100 GB (OS) /dev/sdb2 - SSD Partition 2 - 20 GB (Swap) The operating system was Linux Mint and was installed on the /dev/sdb1 i.e the solid state drive. I had partitioned off the sda into 2 TB and 1TB and presented the 2 TB as the /home to the OS. Anyway last night I decided to make a return to Ubuntu via the path of Elementary OS. Everything went fine with the install until it stated that GRUB installed failed and this was a Fatal error (no kidding I said). No I am stuck. I have definitely done something wrong and don't know what it is... My biggest pain is the files on the /dev/sda2. I want to save these before I try something drastic like wiping off the /dev/sda completely. So I have the following questions... Can I use a liveCD USB to save these files ? I can see the /dev/sda2 but was unable to access the files in the liveCD last not least ... how do I fix the main issue here. Why could the OS not install GRUB 2b... why is my SSD the /dev/sdb ... and not /dev/sda. Does that have something to do with it that my master boot record sits on the HDD /dev/sda and not /dev/sdb

  Read the article

• How do I rsync an entire folder based on the existence of a specific file type in that folder

  - by inquam

  I have a server set up that receives movies to a folder. I then serve these movies using DLNA. But in the initial folder where they end up all kind of files end up. Pictures, music, documents etc. I thought I'd fix this by running the following script inside that folder rsync -rvt --include='*/' --include='*.avi' --include='*.mkv' --exclude='*' . ../Movies/ This works and scans the given folder and moves all the found movies of the given extension types to the Movies folder. But I wonder if there is anyway to tell rsync to if a folder if found that includes a movie of the given extension types, sync the entire folder. Including other files such as .srt. This is to make it easier for me to get subtitles moved along with the movie. I have a solution figured out via a script made in php (yea, I actually do most of my scripting in linux using php... just a habbit that stuck a long time ago). But if rsync can handle it from the start that would be super. Also, I have noticed that this line of rsync actually copies all the root folders in the given folder. If no movie is in the folder it will create an empty folder. How do I prevent rsync from doing this... and saving me the trouble of deleting all folder in Movies that are empty.

  Read the article

• Accessing or Resetting Permissions of a Mounted Registry Hive of a Different User / From a Different System

  - by Synetech

  I’m currently stuck using my backup system until I can replace my dead motherboard. In the meantime, I have put my hard-drive in this system so that I can access my files and keep working on the backup system. Fortunately, I don’t have a permission issues with the files (the partitions are FAT32). The issue I’m having is with the registry. I need to import some of my settings from the hives of my (old? normal?) installation of Windows into the one I’m currently using. Settings from the system hives (SYSTEM, SOFTWARE, etc.) are fine, but the user hive is giving me trouble. I’ve copied the NTUSER.DAT file from my other drive and mounted it with the reg command. Most of the keys (eg Software) are fine and I can access them without problem, but some of them (particularly the Identities key where Outlook Express settings are stored) complains that it cannot be opened. If I open the permissions dialog, I get an error about being unable to view the current permssions. If I then ignore it and try to take ownership of the key and it’s subkeys, I get an access-denied error. If I then add permissions for my user account on this system, I get an error, however I am then able to see the subkeys and values of the key. If I then try to access the subkeys, I get the same original errors. If I repeat the process for each subkey, I can see their values and subkeys, and so on, but of course this gets to be incredibly annoying and time-consuming (especially since the Identities key has a lot of subkeys). Is there an easier/temporary/more correct way to dump a key so that I can import it into my backup system?

  Read the article

• Can not connect remotely to MySQL Server on Ubuntu 10.10

  - by BobFranz

  Ok I have searched google for two days trying to get this to work. Here are the steps I have taken so far: Clean install of Ubuntu 10.10 Install mysql 5.1 as well as admin Comment out the bind address in the config file Create a new database Create a new user that is username@% to allow remote connections Grant all access to this user to the new database EXCEPT the grant option Login on the server is ok using this new user and database on the localhost Login on the server is ok using this new user and database on the server internal network ip Login from a remote computer is ok using this new user and database using the internal network ip Login is not working when logging in with this username and database using the external ip address from the server or the remote computer. I have port forwarding enabled for this port and it is viewable from outside as confirmed by canyouseeme.org I have nmap'd using the following command on the internal ip and get the below result: nmap -PN -p 3306 192.168.1.73 Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:41 PST Nmap scan report for computername-System-Name (192.168.1.73) Host is up (0.00064s latency). PORT STATE SERVICE 3306/tcp open mysql Nmap done: 1 IP address (1 host up) scanned in 0.23 seconds I have nmap'd using the following command on the internal ip and get the below result(I have hidden ip for obvious reasons): nmap -PN -p 3306 xxx.xxx.xx.xxx Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:42 PST Nmap scan report for HOSTNAME (xxx.xxx.xx.xxx) Host is up (0.00056s latency). PORT STATE SERVICE 3306/tcp closed mysql Nmap done: 1 IP address (1 host up) scanned in 0.21 seconds I am completely stuck here and need some help. I have tried everything under the moon and still can not connect from a remote external ip address. Any help is greatly appreciated and I need to do anything to help find the problem let me know and I will post the results here.

  Read the article

• Migrate active directory to Google apps for business

  - by dewnix

  I've got a problem migrating active directory to Gapps. I'm stuck on google apps directory sync (GADS) where it just gives the error "java.lang.NullPointerException" after testing the connection during the LDAP configuration step. I checked the logs and I've pretty much determined that port 389 (standard LDAP port) isn't listening on the exchange server. I've tried telneting to it (from another machine in the same network) with no luck but I can telnet to other ports, that i know are open, successfully. I know they're open because I used portqry and netstat to see them. I'm suspecting that the active directory isn't even installed/running on this machine because there's no active directory services at all running on it. There's no active directory services that say they're NOT running either though. Is it possible AD is installed somewhere else? does it have to be on a machine inside the same network? I found the domain controller and it's host name and when I telnet with port 389, it works however GADS still gives me the same exact error when I substitute that server in. Actually, no matter what ridiculous settings i put into GADS, i still get that same NullPointer error. If i could get some different error than that NullPointer, i'd call that a successful day.

  Read the article

• Apache LocationMatch does not work for group

  - by dma_k

  I would like to configure Apache to proxy mldonkey running at localhost. Initially I have used the following configuration: <IfModule mod_proxy.c> <LocationMatch /(mldonkey|bittorrent)/> ProxyPass http://localhost:4080/ ProxyPassReverse http://localhost:4080/ </LocationMatch> </IfModule> and it didn't worked! error.log reads [error] [client 192.168.1.1] File does not exist: /var/www/mldonkey which means that Apache does not intersect the URL. However, when I change the regexp to following: <LocationMatch /mldonkey/> it started to work (i.e. mod_proxy functions OK, more over all ). I have tried the following alternatives: <LocationMatch ^/(mldonkey|bittorrent)/> <LocationMatch ^/(mldonkey|bittorrent)/.*> <LocationMatch ^/(mldonkey|bittorrent)> <LocationMatch /(mldonkey|bittorrent)> <LocationMatch "^/(mldonkey|bittorrent)/"> <LocationMatch "/(mldonkey|bittorrent)"> <LocationMatch "/(mldonkey)"> <LocationMatch "/(mldonkey)/"> with no positive result. I am stuck. Please give me a hint where to look at. P.S. Apache Server 2.2.19. P.P.S. Would be happy if <LocationMatch> would work, without using the heavy artillery of mod_rewrite.

  Read the article

• How to delete massive files via ftp or ssh?

  - by spotlightsnap

  On my servers, one of the scripts that I have been using keeps creating the blank files at root and I haven't been noticed for more than over 6 months and now total files are created more than 500,000 files. I cannot access that directory through control panel because there were too many files and I can only access with ftp. Even with ftp, ftp truncated the files by 8000 each. So I have to keep deleting 8000 each. I tried to ask my host to delete it for me but they says they can't since it's the liability issues. So what I want to know is how can i delete all of those 500,000 files through ftp? Since it's shared hosting, I don't have SSH access either. Hosting provider says I can request the SSH access but need to verify it and their office closed until next week. So I am stuck with ftp for now. So please kindly let me know how can i delete massive files via ftp ? And incase, if i can get the ssh access, please kindly let me know how can i delete the files via ssh with efficient ways ? Filename are like this closecp.139619 closecp.139619.1 closecp.139620 closecp.139620.1 Thank you.

  Read the article

• My Samsung R480 laptop freezes for short and inconsistent periods of time.

  - by anonymous

  I have a Samsung R480 laptop running Windows 7. It's great, I love it to death, but every so often it'll start having, for lack of a better term, "hiccups". It would freeze completely, emit a loud BZZZZZZT from the speakers (think when a video freezes and the sound gets stuck), then return to working order all in a span of 0.5~2 seconds. It has happened while I was playing Mass Effect, while I was watching both HD and non-HD videos, and while I was surfing the internet (which I've noticed while watching YouTube videos and playing Entanglement, but also noticed while using Facebook, minus the buzzing sound). My Initial hypothesis was that my GPU or CPU were overheating as it would shut down while playing Mass Effect, but when I turned off my WiFi card hardware using [fn + F9], the problem was resolved. As I currently see it, it could be a problem with my CPU, my WiFi card, or my sound card. It could also be a software related issue, possibly an ill-functioning process. It could be chrome related. A memory leak from chrome maybe? Does anyone know how to resolve this?

  Read the article

• Windows 7, network transmit (send) not working

  - by user326287

  My Win 7 works 2 years without problem. But now, I can't transmit (send) big data on LAN/Internet. I can: - Ping anything - Browse Internet, download files at full speed - Send e-mails with very small attachments. - Testing download speed on Speedtest.net, measure stable full speed. I can't: - Testing upload speed on Speedtest.net. Upload stuck.. - Save/send email messages with big (128k) attachment, independent from e-mail provider or e-mail box. THIS IS NOT A HARDWARE/CABLE/CARD OR OTHER NETWORK DEVICES PROBLEM! When I boot from a Linux Live CD, without ANY hardware change, all data sending, testing works correctly, at full speed. I have tried already in Win 7: - Disable Windows/3rd party Firewall completely - Reset IP stack parameters (netsh int ip reset c:\resetlog.txt) - Computer restore - Reinstall LAN driver When I inspect the packets in Wireshark in Windows, I see lot's of (maybe 60% of sent packets) "TCP Retransmission". Sometimes receive "TCP Dup Ack" or "TCP Out-of-Order". Linux don't do this. Thank you for the help.

  Read the article

• How do I serve Ruby on Rails applications on Windows Server 2008?

  - by Adam Lassek

  I have spent the last several hours attempting to get Ruby on Rails running on a Windows server with no luck. At first I tried configuring a test application through IIS7's FastCGI support, but the documentation for this is not very good. I've been following this blog entry, and this one, and this one, and this one but everything seems to be missing major steps, or are out of date. And every article keeps linking back to this Howto from rubyonrails.org that doesn't exist. The sense that I'm getting is that even if I manage to make this work, IIS' FastCGI isn't good enough to use in a production environment anyway. So it looks like my best bet is to setup a reverse proxy in IIS that points to Apache & Mongrel/Passenger using ARR and UrlRewrite. Is there anybody else out there stuck deploying a Rails application on a Windows stack? Am I on the right track? Can you give me a better idea of how to configure this? I believe Plesk already installed an instance of Apache/Tomcat running on this server using a different port, so adding another virtual host shouldn't be difficult; the hardest part seems to be setting up the reverse proxy through IIS.

  Read the article

• If I run two monitors from two different graphic cards, can I still have Twinview?

  - by rumtscho

  I am planning to get a second 2560x1440 monitor for home. The trouble is, I only have 1xDVI, 1xVGA on my graphics card (a 250 GT). I don't want to buy a new graphics card until the prices for the 500 series have stabilized, so probably not before summer (or will it happen earlier? I don't remember how it was for other series, and I couldn't find long-term price history for video cards). The solution I had in mind is to get the 7600 GS from my old PC, which also has 1xDVI, 1xVGA, and run each monitor on a separate card. I have never done that, and I was wondering 1. If I will be able to run the monitors in Twinview then, or will I be stuck with separate X sessions, and 2. Whether there are some other disadvantages as compared to a single-head graphics card. (I am using the proprietary driver because I need compiz). As an aside, how do I find out whether the DVI port on the old graphics card is dual link?

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >