Search Results

Search found 5878 results on 236 pages for 'sim card'.

Page 130/236 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• Nautilus is really slow

  - by david

  Nautilus used to be lightning fast.Now it's dead slow. I have tried upgrading the video card but that does not seem to be the problem. Also I found that there was a problem with the Dropbox uninstall, finally I replace it with pcmanfm which appears to be much faster but the down side is that I no longer have the gwibber social client and a lot of stuff don't work like they use to. Also I completely removed nautilus and couldn't even login to ubuntu to install again nautilus.How can I remove or repair nautilus, and use pcmanfm instead? I have a dell inspiron 1440 3gb ram / disk 300gb / Additionally, why does nautilus run fast when I run it as root? There are no USB devices attached to my computer. Thanks in advance

  Read the article

• Can't connect to Wireless Access Point after installing proprietary drivers

  - by user6554

  I had Windows Vista Basic installed on my computer and I replaced it with Ubuntu 10.10. I then preceded to do the following: I downloaded the wireless driver from 'additional drivers' I enabled my wireless card And now it won't connect to my router but my game systems will. Then I downloaded WiFi-Radar  which did not seem to fix the problem. I still cannot connect to the Internet. I have done an exhaustive search of the Internet and turned up nothing.

  Read the article

• Suitable Ubuntu distribution

  - by Dr AMD

  I need help choosing a suitable distrbution for my PC. I am using an HP d530 CMT with: ?• CPU Type: Intel Pentium 4, 3000 MHz (15 x 200) ?• Motherboard Chipset: Intel Springdale-G i865G ?• System Memory: 1015 MB (PC3200 DDR SDRAM) ?• Video Adapter: Intel(R) 82865G Graphics Controller (96 MB) ?• 3D Accelerator: Intel Extreme Graphics 2 ?• Audio Adapter: Analog Devices AD1981B(L) @ Intel 82801EB ICH5 - AC'97 Audio Controller ?• Network Adapter: Broadcom NetXtreme Gigabit Ethernet I have tried to install Ubuntu 13.10 and 12.04 LTS. Everything is OK on Ubuntu 12.04 except, that the video card was not recognized and the media player, YouTube,etc. did not work properly.

  Read the article

• Using External Monitor with Laptop Monitor as separate monitors

  - by user14623

  I am trying to use 32"LCD monitor with my ubuntu 10.10 installation. I am trying to use my laptop screen and external monitor at the same time but having two separate desktops. I also want to use my laptop with 1280x800 resolution and external one with 1920 x 1080 using VGA. However, ubuntu sees my external LCD as a CRT and provide 13....x... resolution at the best not above. My graphics card driver is Nvidia 270.... driver. Is ubuntu capable of using two monitors separately or should i give up? Thank you

  Read the article

• ADSI, SQL, Exchange Server 2010

  - by WernerCD

  Maybe I'm barking up the wrong tree... We have a Domain Controller "DC1". We have Exchange Server 2010 "Postman". Say I have an Address Book: And I add a few contacts to it: How then do I get the data from that contact via ADSI? Say I want the Job Title or CustomerID field that I filled out in the Contacts list? SELECT * FROM OPENQUERY(ADSI, 'SELECT EXTENSIONATTRIBUTE15 ,DISPLAYNAME ,GIVENNAME ,NAME ,SN ,SAMACCOUNTNAME FROM ''LDAP://DC=ATLANTICGENERAL,DC=ORG'' WHERE USERACCOUNTCONTROL=512 AND SAMACCOUNTTYPE=805306368 AND OBJECTCLASS=''PERSON'' AND OBJECTCLASS=''USER'' ORDER BY SAMACCOUNTTYPE ') How can I tie the Contact Card to an Active Directory User, so that I can edit either the AD account information OR the Exchange information and have them synced up?

  Read the article

• How easily recognized are new TLDs?

  - by Ryan Muller

  I'm interested in purchasing a domain name for a new service I intend to market. I know that .com is instantly recognizable as a domain ending, and if I see stackoverflow.com I know it's a web address. However, I also recognize strings like github.io and mysite.tk as domains, since I've worked with domains like these. To the average member of the public, if one sees an address ending in .io or similar, non-mainstream TLD (e.g. on a billboard or business card) would they immediately know it's a URL and to type it into a browser? Or are these new domains only useful 1) for a technical audience or 2) when you will be primarily promoting your site through links and not print?

  Read the article

• Laptop takes a long time to boot after Grub menu

  - by Andres

  I am running a Asus R401VJ laptop (Latin America version of N46VJ) that has a Core i7 CPU and 8GB RAM. After my Grub menu, which is displayed for 2 seconds as I set it up, I'm getting a black screen with a blinking white cursor that is increasing my boot time to about 60 seconds. After a while Ubuntu runs fine, I just want to reduce my boot time. I don't know if this has something to do with my never used Nvidia 2GB GeForce GT 635M graphics card. Always when I tried to install the driver, I ended up with a ~600x800 screen resolution, and I fixed it by deleting a file called: xorg.conf from the /etc/X11/ directory, following a suggestion that I read in another forum. I would appreciate detailed answers, I'm still new at Ubuntu.

  Read the article

• Not able to connect huawei ec1561

  - by Nixon Babu

  I have a huawei ec1561 broadband data card, ISP-MTS India. I am not able to connect internet through it. while connecting it via network manager it says "You are registered with home network" and again "Modem network disconnected" . i think it is detected as a modem but not connecting properly. Any help please? I'm hitting this rock with my head more than a month... when I tried installing the driver that came with the device it finally says "Installing NDIS driver failed". I can post further information if anybody helps

  Read the article

• Monitor resolution messed up, monitor is unknown.

  - by Kaustubh P

  Is there anyway to reset my monitor? My moitor is using the xorg.conf file. I use 10.04, without any Graphics Card. My monitor is an Acer X193W, with a native resolution of 1440x900. This is my xorg.conf file: Section "Screen" Identifier "Configured Screen Device" Device "Configured Video Device" Monitor "Test" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1440x900_60.00" EndSubSection EndSection #Section "Device" # Identifier "Configured Video Device" # HorizSync # VertRefresh #EndSection I still cant view the native resolution, even when defined in the xorg file. An way I can revert to the default, or delete some files, to make the system detect the monitor again? My last resort is the cvt method, and adding it to the xrandr file. EDIT: I use Intel Drivers. My /proc/fb contains 0 VGA16 VGA

  Read the article

• Does FFMpeg support gpu acceleration of media encoding/decoding?

  - by Jason123

  I was wondering if ffmpeg supported gpu acceleration. I was reading on their websites and came across contradicting information. http://www.ffmpeg.org/general.html#Video-Codecs -H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (VDPAU acceleration) http://ffmpeg.org/trac/ffmpeg/wiki/x264EncodingGuide -Will a graphics card make x264 encode faster? No. libx264 doesn't use them (at least not yet). There are some proprietary encoders that utilize the GPU, but that does not mean they are well optimized, though encoding time may be faster; and they might be worse than x264 anyway, and possibly slower. Regardless, FFmpeg today doesn't support any means of gpu encoding, outside of libx264. If not, is there any way to add gpu acceleration to h.264 encoding/decoding?

  Read the article

• Settings xorg.conf to be used with VESA driver?

  - by Fernando Costa

  I have an brand new installation of Ubuntu 9.10 (karmic version) where everything is fine except the video resolution. In Ubuntu 9.10, the file xorg.conf is empty by default. I'm using an onboard video card, and Ubuntu can not find the right resolution for me. It always uses 800x600, but I need at least 1024x768. Also, my monitor is listed as Unknown Type. Ubuntu did find the right resolution when I changed the monitor to a Samsung monitor. By the way what are the generic settings to put inside xorg.conf? What is the settings for Refresh Rate, for example, I got a resolution of 1280x800, but the Refresh Rate generally between 60 ~ 80 htz is ZERO on my resolution.. In 1024 resolution my Refresh Rate is 75 htz.. What is going on with my resolution and how to modify the Refresh Rate?? Many Thanks!

  Read the article

• Should I start learning WPF?

  - by questron

  Hi, I've been studying C# for about 2 months so far, I have a few years experience programming however in VBA and VB6, but nothing too in depth (I've written simple tools, but nothing too advanced). I am very interested in WPF and I was wondering whether it would be too early for me to start learning how to use it? For reference, I am about 400 pages into 'Head First C#' and I've written a program that can quickly tag image files for moving into a predefined folder or to delete (Allows the user to pull images off of a camera memory card and sort VERY quickly). That's the most advanced app I've written.

  Read the article

• Black screen after installing ubuntu 11.10 on new pc

  - by wouter205

  Could anyone troubleshoot me please; After installing ubuntu on my fresh desktop, the ubuntu loading screen shortly appears and then I get a black screen and cannot access the login screen. When booting in failsafe modus, i get a message that ubuntu failed to load failsafe video drivers. I have a radeon 6850 video card and am able to start ubuntu live session. So I guess it loads the wrong drivers upon booting from hd. I remember a file in which you could change which drivers it should load, but forgot the exact location. Could this solve my problem (or another solution)

  Read the article

• Force gdm login screen to the primary monitor

  - by Kirill

  I have two monitors attached to my video card. Primary monitor has a resolution equal to 1280x1024 and the second has 1920x1200. My gdm login screen always appears on the second monitor even if it is switched off. My question is how to force gdm to show the login screen always on the primary monitor with resolution 1280x1024? I use Nvidia GT9500 videcard in Twinview mode. I can't use Xinerama because vpdau doesn't work correclty in this mode. What I have found is that mouse pointer always appears in the center of union of the screens and center is always on the monitor with higher resolution. Login screen always shows where mouse cursor is. Now my primary monitor has a resolution equal to 1920x1080. The problem still persists, mouse cursor always appears in the right-bottom corner of the second monitor.

  Read the article

• Aser Aspire 3690 WIreless Not working, new Ubuntu user

  - by drew

  I don't know that much about Ubuntu, but I put it on an Acer Aspire 3690 Laptop (replaced Win Vista). Everything seems to work fine, but the wireless connection. It says "FIRMWARE MISSING". It detects that I have a wireless card, so I don't know what to do. I've already used the "ADDITIONAL DRIVERS" thing, and that didn't work. I've googled and have not found anything helpful. I don't really know what I'm doing, so can your directions please be kindergarden level? Thank you very much for any help you can provide. I really appreciate it.

  Read the article

• Wireless not working, no driver showing in the Additional Drivers window

  - by edit lopez

  I am a new user of Ubuntu. I have a Asus Q501L laptop that came preinstalled with Windows 8, but I wanted to move from Windows and try something new, so I just decided to install Ubuntu without thinking to much about it. The problem I have is that I can't install the additional drivers. When I go to to Additional Drivers nothing appears, it just says: no proprietary drivers are in use and in small letters continues: a proprietary driver has private code that Ubuntu developers can't review and improve. security and others updates are dependent on drivers vendor.. I can't even use the wireless connection. I really don't know what to do. I tried to download the drivers from Asus, but when I tried to install them it said: an error occurred while loading the archive. Also I don't know the model of the PC wireless card. If there is something I can do to find out that please tell me. Thanks!

  Read the article

• Best tools to build an auction website

  - by Daniel Loureiro

  Can I get your feedback on the best tools to build an auction website with the following features: The site takes a commission (like 5%) on each transaction Each user can assign a rating (like 4.5 stars) to his completed transaction, and comment on the seller's profile. Accept payments in paypal and credit card I've been looking into Joomla! and JomSocial but they haven't convinced me much so far. I have some programming experience in C, Python and Java. If no CMS tools are of use I'd appreaciate if you could tell the best route to take in programming to get the auction site done.

  Read the article

• Slow DNS Resolution

  - by user4541

  After a clean install of 10.10 I'm finding DNS resolution takes quite a long time. Hitting any url takes a good few seconds (10 - 30) before the site is displayed. I'm thinking this is a DNS resolution issue due to the 'waiting' or 'looking up' text being displayed in Firefox and Chrome. I do not get this issue with Slackware Linux or Windows 7 so it is not network or DNS server specific issue. It's something on the client side. Looking around on Google I see there are a few other people with this issue. The ones that have reported a workaround by switching to openDNS are disabling IPV6 or dealing with another issue. Any help would be appreciated. My network card is wired: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express Thanks

  Read the article

• Shotwell issues in 11.10

  - by John Speed

  I had used Shotwell happily previously then updated to Natty last week. Despite Shotwell showing on the tool bar on screen, when clicked, nothing happened, and it ignored my SD card when loaded. I read all sorts of remedies and tried everything to no avail. When I next turned on the laptop, Ocelot was available so with nothing to loose, I upgraded again. Still no Shotwell. Tried all the new fixes and now atleast I have the icon pictures but nothing behind it. When I ran the command to load the log file, Shotwell loaded and all my photos are present. Exited programme, and now nothing. Can anyone tell me where I have gone wrong please.

  Read the article

• ATI Radeon HD 5750 and lagging in games and youtube videos

  - by Morten Fjord Christensen

  I have a X-ONE W-601 desktop pc: 3,1GHz AMD QuadCore Athlon II 645 X4 8 GB DDR3 RAM 1000 GB Harddisk 7200RPM ATI Radeon HD5750 with 1GB DDR5 RAM I'm running Ubuntu 11.10 64-bit and have installed the proprietary driver, but still games lag and videos a little bit. Been googling around and seen that it has something to do with the older drivers from AMD and KMS, but no guide helped me correctly through to make my graphic card work smoothly. I don't know if this helps but "fglrxinfo" in terminal shows: display: :0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 5700 Series OpenGL version string: 4.1.11005 Compatibility Profile Context And the driver check command shows: [ 51.184] (II) ATI Proprietary Linux Driver Version Identifier:8.88.7 Any help appreciated :D

  Read the article

• Grub-Efi wrong resolution

  - by Nikki Kononov

  My question, as it comes from the title, related to grub, but it's a different thing. I re-installed Windows 7 and Ubuntu 12.10 in UEFI mode (before that I was using normal BIOS) and everything went perfectly fine. Both systems load as they should but there is one thing that keeps bothering me. The problem is before I installed both systems in UEFI I used to boot in both system using common grub (non-uefi) and resolution in this grub was correct (which is 1366x768). Right now with grub-efi I have wrong resolution (which is seems to be 640x480). So my question is can can I safely set grub-resolution using grub config files or issue is related to something else? (for instance graphics card). I am using Ubuntu 12.10 Intel HD 3000 + Nvidia GT 540M Optimus (I am using bumblebee) Kernel 3.5.0-19-generic all updates installed! I also added ubuntu x-swat ppa for drivers. Thank you for your help!

  Read the article

• HDMI port not recognized on Sony Vaio

  - by julio

  I am running Ubuntu 11.10 64bit with a Sony VAIO VPC F11. It has an NVIDIA GeForce 310M video card, with the latest Nvidia drivers for the 64 bit linux, and a Windows partition with Win7 64bit. NVIDIA driver version is NVIDIA-Linux-x86_64-280.13 External monitor is Samsung SyncMaster P2770 If I boot into the Windows partition, the HDMI works as expected, with sound and video-- under linux, the HDMI port is not recognized at all, apparently, and provides no signal to the attached monitor. The nividia-settings tool does not recognize any monitor connected to the HDMI port. Disper is installed and cannot recognize an attached external monitor. Can anyone help me diagnose this issue and fix it if possible? The laptop has only the one HDMI port to connect any external monitor, so it I can't get this working I'm stuck using either the laptop screen or Windows. Thanks

  Read the article

• XFCE ~ Volume Hot Keys Not Working

  - by fleamour

  Just installed vanilla Xubuntu 12.04 LTS & updated on a ThinkPad E325 with Conexant CX20671 sound card. I notice volume hot keys work under Xubuntu DE but not XFCE. You can summon sound settings under Xubuntu but they are missing under XFCE. Also sound bar is greyed out though sound will still function. Muting/decreasing/increasing volume with hot keys has no effect. Is there a workaround? If not what package would I report a bug against?

  Read the article

• Vdpau performance in Precise with Unity 3d

  - by bowser

  vdpau seems to be broken in Precise under Unity 3d. CPU usage ranges around 50-70% for 1080p movies while same movies utilizes around 5-10% in Natty with vdpau enabled (under Unity3d) The card is Nvidia G105m. It doesn't seem to be a Nvidia driver problem because in gnome-shell everything works as expected and I have tried different versions of Nvidia drivers (295.20, 295.33, 295.40 and the latest 302.XX from xorg-edgers) The results are all the same, works in Gnome Shell but not in Unity 3d. Disabling syn to vbank works if movie is not in full screen mode, but it doesn't work for full screen. I have searched around and haven't found much info. I am wondering if others are experiencing the same problem and if there are some known work around that I have missed. Unity 3d is otherwise very nice in Precise, but this is a show stopping issue for me (literally). Thanks. I have filed a bug here https://bugs.launchpad.net/unity/+bug/993397

  Read the article

• Replace Broadcom "wl" driver with "b43"

  - by Laszlo Boros

  I'm using Ubuntu 10.04.4 LTS, and in my laptop there is a Broadcom BCM4312 wlan card. lspci output: 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) Subsystem: Broadcom Corporation Device 04b5 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f4500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 81-ac-1d-ff-ff-12-54-92 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, ssb So as you can see, the current (and default) driver is wl - installed with jockey. But I have another Ubuntu based distribution on my laptop (BackTrack linux), which is also 10.04, but it has the b43 driver installed and the overall performance is MUCH better. So I would like to install it on this OS too, but even google didn't help me. So my question is how to install the latest b43 driver on my Ubuntu?

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >