Search Results

Search found 83713 results on 3349 pages for 'data change'.

Page 1300/3349 | < Previous Page | 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307  | Next Page >

• How can I keep a file in Windows 7's cache?

  - by netvope

  Sometimes you know better than Windows what files will be re-used later. Suppose you have 8GB of memory, and you use the same 1GB file every hour in an I/O-bound application (which takes 1 second to finish if the file is cached, and 1 minute if not.) Now you process some other 16GB of data that are not going to be re-used. Naturally the frequently used 1GB file will be pushed out of the cache. It would be beneficial if one can tell Windows to keep that 1GB file in memory. (Better yet, it would be great if I can tell Windows not to cache those 16GB of data, but I'm not optimistic that this can be done.) The poor-man's way to keep a file in the cache would be to keep reading the file. Are there any better ways? Are you aware of any programs that do this? (If this can be easily done under Linux, please let me know too.)

  Read the article

• What is Light Peak

  - by Jonathan.

  I've heard this a lot recently, todo with Apple and Intel. Some says it's a protocol, others say it's fibre optic, and others say it's copper. One source even said it was a "wireless wire". Apparently it can carry data, but not video streams, surely the cable can't know the difference between 1s and 0s representing data, and 1s and 0s representing video streams. Or it will replace all the wires we currently have except power, another place said it is for inside laptops. Those are just examples so I haven't given any sources, I just want to know what on Earth Light Peak is?

  Read the article

• Write to windows share

  - by aidan

  I used to mount a windows share in Ubuntu server, with an entry in fstab: //data/SharedFolder /media/SharedFolder/ smbfs user,defaults,credentials=/root/.creds,uid=root,gid=root 0 0 /root/.creds is a text file with three lines, my username, password and domain. Users on the ubuntu server could write to this mount, but then I upgraded to 10.04 and now only root can write. Regular users can still read though. mount currently tells me: //data/SharedFolder on /media/SharedFolder type cifs (rw,mand,noexec,nosuid,nodev) How do I make it world writeable again? Thanks

  Read the article

• Configuring vsftpd with nginx on ubuntu

  - by arby

  I have vsftpd installed on Ubuntu 12.04LTS along with nginx, php, and sql on an Amazon ec2 instance. The web server is good to go, but I'm having trouble connecting to the FTP server. I'm not quite sure how to set the privileges or what configuration options I might be missing. By default, the location of the web root is at /usr/share/nginx/www and it is owned by root:root. The web server runs as user www-data in the group www-data. I've opened port 21 and set the passive ports in the ec2 backend and ufw firewall. In vsftpd.conf, I have: ... anonymous_enable=NO local_enable=YES local_umask=0027 chroot_local_user=YES pasv_enable=YES pas_max_port=12100 pasv_min_port=12000 port_enable=YES ... Now, I'm unsure how to create the FTP user that when I login, displays my web directory with write access. I've tried it a few different ways, but I keep running into errors (either no connection, no write access, or very slow timeouts.)

  Read the article

• DFS-R + VSS - Run VSS at all locations or one?

  - by pbarranis

  I have 4 servers, one at each office location, each sharing read/write copies of 1.5TB of data. Changes are replicated 24/7 between all 4 servers via DFS-R. All servers run Windows 2008 R2. I'm interested in implementing VSS (Volume Shadow Services) on this data. I've read that DFS-R and VSS play nicely together, but I'm left with one unanswered question: turn on VSS at all locations or just one (the headquarters). Can I run VSS at all 4 locations safely, or is it wiser to run it at just 1 location? Thanks!

  Read the article

• Monitoring over Time with Nagios: How?

  - by David

  Nagios in its standard usage monitors with point-in-time checks: either something is - or is not - true. Other tools like SGI's PCP, HP's MeasureWare, and SEC provide monitoring over time - monitoring things like average disk access time over the last five minutes, or other similar items. Is there anything like this for Nagios? I'm already running NDOUtils, which seems like a natural source for such data. I'd like to have something that would monitor and fire off alarms based on a time-based check using historical data. Is there anything like this for Nagios?

  Read the article

• What's the best self-tracking software for Linux?

  - by trench

  I'm looking for a way to track myself and receive quality data upon which I can write future scripts/programs. For example, I use Google Reader a lot. I'd like to track the hrefs that garner my clicks. Further, I'd like to drop all of the words of each href into a database where they can be stacked in a hierarchical manner. At the end of the week I want to know that "Ubuntu" garnered 448 clicks and "Cheetos" garnered 2. :) That's just one example... I'd like this tracking and data-collecting to extend beyond my browser. I know writing something to do this myself wouldn't be too awfully difficult but if something already exists I'd happily use it. Thanks in advance. Primary OS: Ubuntu 10.04

  Read the article

• How can Nagios handle non-threshold based plugins?

  - by FliesLikeABrick

  I am writing a Nagios plugin to monitor trends of a certain storage resource utilization (e.g. gradual increases are fine, but an instantaneous/sudden increase or decrease in resource usage may indicate a problem). For what it's worth, it is reviewing the last N entries in an RRD file generated by a custom cacti data source/templates. What is the "right" way to handle Nagios notification config/implementation for this? The problem is that it the plugin would exit as warning/critical for one polling period, but in the next it would be fine (or 3 polling periods later, if I look at 3 polling periods worth of data). I guess the question is: should I just write it in such a way that it will alert for X polling periods, or should I find a way to write it such that manual intervention is required for it to clear (such as logging into the monitoring server or hitting a URL to run a script that submits a passive result)? Your input is appreciated, and if you have any tips for how to implement the latter I'm open to them (I can think of a few ways to possibly implement it)

  Read the article

• Web application/ site service (like Google App Engine) for PHP/ MySQL and Postgres

  - by Simon

  I would like to find a service similar to Google App Engine for PHP/ MySQL/ Postgres sites/ applications. We host two different types of site. i). PHP/ Mysql/ Zend Framework <VirtualHost *:80> DocumentRoot "/home/websites/website.com/public" ServerName website.com # This should be omitted in the production environment SetEnv APPLICATION_ENV development <Directory "/home/websites/website.com/public"> Options Indexes MultiViews FollowSymLinks AllowOverride All Order allow,deny Allow from all RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] </Directory> </VirtualHost> ii). Matrix CMS - PHP/ Postgres + loads of pear classes <VirtualHost *:80> ServerName server.example.com DocumentRoot /home/websites/mysource_matrix/core/web Options -Indexes FollowSymLinks <Directory /home/websites/mysource_matrix> Order deny,allow Deny from all </Directory> <DirectoryMatch "^/home/websites/mysource_matrix/(core/(web|lib)|data/public|fudge)"> Order allow,deny Allow from all </DirectoryMatch> <DirectoryMatch "^/home/websites/mysource_matrix/data/public/assets"> php_flag engine off </DirectoryMatch> <FilesMatch "\.inc$"> Order allow,deny Deny from all </FilesMatch> <LocationMatch "/(CVS|\.FFV)/"> Order allow,deny Deny from all </LocationMatch> Alias /__fudge /home/websites/mysource_matrix/fudge Alias /__data /home/websites/mysource_matrix/data/public Alias /__lib /home/websites/mysource_matrix/core/lib Alias / /home/websites/mysource_matrix/core/web/index.php/ </VirtualHost> My key requirements are: I don't want to worry/ know/ care about the server/ infrastructure Secure/ up to date software/ os Good monitoring Automatic scalability SLA I apologise for the length of the question. In short all I want to do is i). create vhost, ii). create db iii). install app/ site iv). relax. Thanks. Edit: I include the Matrix vhost because that is the only complication that I cannot really do via a .htaccess file.

  Read the article

• Increase backup speed, Backup Exec 2010 - QNAP TS419U+ NAS

  - by user99912

  We have a QNAP NAS and the network shares are being backed up by Backup Exec 2010 over SMB. We can't install the remote agent on the NAS as it has an ARM processor and, as far as I am aware, there is no compatible agent. Do you have any suggestions on any faster method of backing up these shares as opposed to the current scenario? Currently the network bandwidth is not the issue, it seems that this access method is just not able to go any quicker. We've also added the NAS shares to the start of the selection list, but we're still running into 18 hours total backup time (total amount of data on the NAS is roughly 650GB). Any comments and/or suggestions welcome. EDIT: Data is being pulled from the NAS by Backup Exec to a LTO4 tape drive

  Read the article

• losetup does not decrypt device in Ubuntu 11.4 as before

  - by Kay

  I had an external volume mounted using losetup for about two years. It was created using Ubuntu 9.4 and I used the same Ubuntu installation throughout all dist upgrades. Now as I bought a new laptop I set up a fresh Ubuntu 11.4 installation on it. Problem is: losetup -e twofish /dev/loop0 /dev/sdb2 does not decrypt the volume anymore. The data in /dev/loop0 contains apparently random data. I am sure I entered the correct password. I modprobe'd cryptoloop and twofish. My question is: Has Canonical done some obscure changes to losetup like adding a salt? Does losetup depend on configuration files I did not know about? How can I decrypt the volume on my now laptop?

  Read the article

• How to truly sync files on Windows 7 so Dropbox notices the changes

  - by Edward Tanguay

  I want a file on my hard drive in Windows 7 to sync to my public dropbox folder. I can do this with: mklink /H "c:\dropbox\Public\test.txt" "c:\data\test.txt" And the first time after I do this, the file c:\dropbox\Public\test.txt is indeed created, and is available online via http://dl.dropbox.com/u/.../test.txt. And when I update the file c:\data\test.txt then indeed the file c:\dropbox\Public\test.txt reflects the changes, however: http://dl.dropbox.com/u/.../test.txt does not reflect the changes since DropBox somehow doesn't get the information that that file was changed. What is a workaround or another solution to this so that any changes in the original file is also reflected in the dropbox URL link?

  Read the article

• How to establish SIP connection, when SIP-proxy is required?

  - by LA_

  I have Asterisk/1.8.13.1 Asterisk GUI-version : SVN--r Yes, quite old one, but I can not update it since this is installed on my Synology NAS. NAS is connected to internet thru router Asus RT-N16. I should use the following data to connect to the server: Auth name – 7499952XXXX User name/User ID/Display Name – nickname Authorization user name - [email protected] Domain - sip.beeline.ru SIP proxy server - msk.sip.beeline.ru I've also found the following string: [email protected]:password:[email protected]@msk.sip.beeline.ru:5060/7499952XXXX I've tested the parameters on my PC thru X-Lite and it works well (so, assume there is no any problem with the router, no need to do anything with router's NAS settings). But since I am quite new to Asterisk, I can not understand where to input all these data. Asterisk GUI doesn't have fields for proxy: Can somebody please help me with step-by-step instruction? Thank you in advance!

  Read the article

• How to document linux server configuration?

  - by Margaret Thorpe

  Hi, I have about 20 linux servers which I need to document the configuration of. I do not mean the detailed configuration of services, but rather user accounts, databases, databases accounts, ip addresses, physical location, SSH port etc. etc. I know all this data is stored in config files, but I want to centralize it all. I am considering just creating a spreadsheet to record this data, but was wondering if there is something better (perhaps a small php/mysql app) which would be more structured and complete than a hacked together spreadsheet. What do you use?

  Read the article

• Has anyone achieved true differential sync with rsync in ESXi?

  - by Julius

  Berate me later on the fact that I'm using the service console to do anything in ESXi... I've got a working rsync binary (v3.0.4) that I can use in ESXi 4.1U1. I tend to use rsync over cp when copying VM's or backups from one local datastore to another local datastore. I've used rsync to copy data from one ESXi box to another but that was just for small files. In now trying to do true differential syncs of backups taken via ghettoVCB between my primary ESXi machine and a secondary one. But even when I do this locally (one datastore to another datastore on the same ESXi machine) rsync appears to copy the files in their entirety. I've got two VMDK's totally 80GB in size, and rsync still takes anywhere between 1 and 2 hours but the VMDK's aren't growing that much daily. Below is the rsync command I'm executing. I am copying locally because ultimately these files will get copied onto a datastore created from a LUN on a remote system. Its not an rsync that'll be serviced by an rsync daemon on a remote system. rsync -avPSI VMBACKUP_2011-06-10_02-27-56/* VMBACKUP_2011-06-01_06-37-11/ --stats --itemize-changes --existing --modify-window=2 --no-whole-file sending incremental file list >f..t...... VM-flat.vmdk 42949672960 100% 15.06MB/s 0:45:20 (xfer#1, to-check=5/6) >f..t...... VM.vmdk 556 100% 4.24kB/s 0:00:00 (xfer#2, to-check=4/6) >f..t...... VM.vmx 3327 100% 25.19kB/s 0:00:00 (xfer#3, to-check=3/6) >f..t...... VM_1-flat.vmdk 42949672960 100% 12.19MB/s 0:56:01 (xfer#4, to-check=2/6) >f..t...... VM_1.vmdk 558 100% 2.51kB/s 0:00:00 (xfer#5, to-check=1/6) >f..t...... STATUS.ok 30 100% 0.02kB/s 0:00:01 (xfer#6, to-check=0/6) Number of files: 6 Number of files transferred: 6 Total file size: 85899350391 bytes Total transferred file size: 85899350391 bytes Literal data: 2429682778 bytes Matched data: 83469667613 bytes File list size: 129 File list generation time: 0.001 seconds File list transfer time: 0.000 seconds Total bytes sent: 2432530094 Total bytes received: 5243054 sent 2432530094 bytes received 5243054 bytes 295648.92 bytes/sec total size is 85899350391 speedup is 35.24 Is this because ESXi is itself making so many changes to the VMDK's that as far as rsync is concerned the entire file has to be retransmitted? Has anyone actually achieved actual diff sync with ESXi?

  Read the article

• Application upgrade triggered from web application on Ubuntu/Linux

  - by Witek

  On my ubuntu server I have an application MyApp which runs as a daemon with its own user myapp. Then I have a web application MyPortal which runs in apace httpd as user www-data. This application serves a web page with a Redeploy MyApp button. When clicking this button I want to start the script redeploymyapp. This script stops the MyApp deamon, upgrades the application and starts the daemon again. The problem is, that the redeploymyapp script needs to be executed by the user myapp, while MyPortal is running as www-data. What is te best way to solve this problem?

  Read the article

• Build and migrated to software raid (mdadm) on GPT disk, now can't assemble array

  - by John H

  mdadm, gpt issues, unrecognized partitions. Simplified question: How do I get mdadm to recognize GPT partitions? I have been attempting to convert/copy my Ubuntu 11.10 OS from a single drive to software raid 1. I have done similar in the past, but in this case, I was adding in a drive that has been configured for GPT and I tried to work with that without fully looking into the implications. Currently, I have a non-booting mdadm RAID 1 array of /dev/md127 (the OS assigned that and it keeps picking up). I am booting off of live USB keys, currently System Rescue CD from sysresccd. While gdisk and parted can see all the partitions, most of the OS utilities do not, including mdadm. My main goal is just to make the raid array accessible so I can get pull the data and start fresh (without using GPT). /dev/md127 /dev/sda /dev/sda1 <- GPT type partition /dev/sda1 <- exists within the GPT part, member of md127 /dev/sda2 <- exists within the GPT part, empty /dev/sdb /dev/sdb1 <- GPT type partition /dev/sdb1 <- exists within the GPT part, member of md127 History: POINT A: The original OS was install on sda (actually /dev/sda6). I used a the Ubuntu live usb to add sdb. I got warning from fdisk about GPT so I used gdisk to create a raid partition (sdb1) and mdadm to create a raid1 mirror with a missing drive. I had many issues getting this working (including being unable to get grub to install) but I eventually got it to boot using grub on sda and /dev/md127 off of sdb. So at point A, I had copied my OS from sda6 to md127 on sdb. I then booted into a rescue mode and attempted to get a bootloader onto sdb, which failed. I then discovered my mistake: I had installed the raid onto sdb instead of sdb1, essentially overwriting the sdb1 partition. POINT B: I now had two copies of my data- one on md127/sdb, and one on sda. I destroyed data on sda and created a new GPT table on sda. I then created sda1 for the raid array, and sda2 for a scratch partition. I added sda1 into the raid array and let it rebuild. md127 now covered /dev/sdb and /dev/sda1 as fully active and synced. POINT C: I rebooted onto linux rescue again and was still able to access the raid array. I then removed /dev/sdb from the array and created /dev/sdb1 for the raid. I added sdb1 to the array and let it sync. I was able to mount and access /dev/md127 without issues. Once it completed, both /dev/sda1 and /dev/sdb1 were GPT partitions and actively syncing. POINT D (current): I rebooted again to test if the array would boot and grub failed to load. I booted off of my live thumb drive and found that I can no longer assemble the raid array. mdadm doesn't see the required partitions. -- root@freshdesk /root % uname -a Linux freshdesk 3.0.24-std251-amd64 #2 SMP Sat Mar 17 12:08:55 UTC 2012 x86_64 AMD Athlon(tm) II X4 645 Processor AuthenticAMD GNU/Linux === /proc/partitions and parted look good: root@freshdesk /root % cat /proc/partitions major minor #blocks name 7 0 301788 loop0 8 0 976762584 sda 8 1 732579840 sda1 8 2 244181703 sda2 8 16 732574584 sdb 8 17 732573543 sdb1 8 32 7876607 sdc 8 33 7873349 sdc1 (parted) print all Model: ATA ST31000528AS (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 2 750GB 1000GB 250GB Linux/Windows data Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 Linux RAID raid Model: SanDisk SanDisk Cruzer (scsi) Disk /dev/sdc: 8066MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 31.7kB 8062MB 8062MB primary fat32 boot, lba === # no sda2, and I double the sdb1 is the one shown in parted root@freshdesk /root % blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="75dd6c2d-f0a8-4302-9da4-792cc7d72355" TYPE="ext4" /dev/sdc1: LABEL="PENDRIVE" UUID="1102-3720" TYPE="vfat" /dev/sdb1: UUID="2dd89f15-65bb-ff88-e368-bf24bd0fce41" TYPE="linux_raid_member" root@freshdesk /root % mdadm -E /dev/sda1 mdadm: No md superblock detected on /dev/sda1. # this is probably a result of me attempting to force the array up, putting superblocks on the GPT partition root@freshdesk /root % mdadm -E /dev/sdb1 /dev/sdb1: Magic : a92b4efc Version : 0.90.00 UUID : 2dd89f15:65bbff88:e368bf24:bd0fce41 Creation Time : Fri Mar 30 19:25:30 2012 Raid Level : raid1 Used Dev Size : 732568320 (698.63 GiB 750.15 GB) Array Size : 732568320 (698.63 GiB 750.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 127 Update Time : Sat Mar 31 12:39:38 2012 State : clean Active Devices : 1 Working Devices : 2 Failed Devices : 1 Spare Devices : 1 Checksum : a7d038b3 - correct Events : 20195 Number Major Minor RaidDevice State this 2 8 17 2 spare /dev/sdb1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed 2 2 8 17 2 spare /dev/sdb1 === root@freshdesk /root % mdadm -A /dev/md127 /dev/sda1 /dev/sdb1 mdadm: no recogniseable superblock on /dev/sda1 mdadm: /dev/sda1 has no superblock - assembly aborted root@freshdesk /root % mdadm -A /dev/md127 /dev/sdb1 mdadm: cannot open device /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 has no superblock - assembly aborted

  Read the article

• Is it harmful to laptop to move it when it's working?

  - by Ehsan Mamakani

  when my laptop is on I usually move it can it harm the hardware or my data?

  Read the article

• How is this modsec rule getting triggered?

  - by BipedalShark

  I made a GET request to the URL, http://domain.tld/test/docs/index.php?create_table=1&step=2 and got a 403 response code. It turns out this modsec rule is getting triggered: Access denied with code 403 (phase 2). Pattern match "(?:ogg|gopher|zlib|(?:ht|f)tps?)\:/" at ARGS:gltr_redir. [file "/opt/mod_security/10_asl_rules.conf"] [line "827"] [id "340153"] [rev "22"] [msg "Generic PHP code injection protection via ARGS 3"] [severity "CRITICAL"] I would assume ARGS refers to GET/POST data, but there's no gltr_redir in the query string. And, being a GET request, there's obviously no POST data. So how is this rule being triggered?

  Read the article

• Script/ Macro in Excel, by clicking on a cell

  - by Noob Doob

  There's something I want to do in Excel 2010. Specifically, I want to be able to make the open sheet load data from a text file, by clicking -important- on a cell of the current open worksheet. So my specific needs are: If it is possible in some way, to start a macro/script by clicking on a cell. About the script/macro: What would be the preferable, by your opinion, way of implementation. And more specifically, how to automatically import the data needed, only by clicking, without having to continually specify the desirable .txt file each time, only 1 time at max, at start or by using a custom "initalization/configuration" file.

  Read the article

• How to setup Database Permissions on SqlServer Express 2008

  - by Timo Willemsen

  I'm using a code-first approach of using the Entity Framework. When I first run the application it will try to create the database matching my MVC models. However, it doesn't have permission to create it I think. I get the following error: CREATE DATABASE permission denied in database 'master'. What user is trying to access the SqlServer and how can I add it's permissions to let it work? This is the connectionstring I'm using (which should be right...) <add name="ContextDb" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;initial catalog=ContextDb" providerName="System.Data.SqlClient"/> Cheers

  Read the article

• inodes and tree-depth in ext2

  - by David Hagan

  I have an ext2 filesystem with a maximum number of inodes per directory (somewhere around 32k), and also a maximum number of inodes in the entire filesystem (somewhere around 350m). Because I'm using this filesystem as a datastore for a service that has in excess of 32k objects, I'm distributing those objects between multiple subdirectories (like a dictionary separates A-K and L-Z). My question is this: Is there any significance to the tree depth when I'm building these inodes? Is there a significant difference or limitation that's going to affect my service if I choose "/usr/www/service/data/a_k/aardvark" over "/data/a_k/aardvark"?

  Read the article

• Using Gentoo's `ebegin`, `eend` etc under Ubuntu

  - by Marcus Downing

  We're quite fond of the style of the ebegin, eend, eerror, eindent etc commands used by Portage and other tools on Gentoo. The green-yellow-red bullets and standard layout make for very quick spotting of errors, on what would otherwise be very grey command line output. #!/bin/sh source /etc/init.d/functions.sh ebegin "Copying data" rsync .... eend $? Producing output similar to: * Copying data... [ OK ] As a result we're using these commands in some of our common shell scripts, which is a problem for the people using Ubuntu and other linuxes. (linuces? linuxen? linucae? other distros) On Gentoo these functions are provided by OpenRC, and imported with functions.sh file (whose exact position seems to vary slightly). But is there a simple way of getting these commands on Ubuntu? In theory we could replace them all with dull echos, but we'd rather not?

  Read the article

• Refering to another field in a form and return entries based on the filed

  - by Claus Machholdt

  Structure of DB is: Org_Year(Table) ID Org_Name_ID Org_Year Ft(Table) ID Org_Year_ID Count Org_Name(Table) ID Org_Name I've created a form to input data into Ft. Form has reference to Org_name. I should be able to choose between different org first. Afterwards i want to choose which year to enter data into Ft for. I only want to be presented with a list of Years according to the entries in the Org_Year table, where org matches my selection in the dropdown above. The query to populate the select box (Org_year_Box) is: SELECT Org_Year FROM Org_Year WHERE Org_Name_ID=Organisation_Name_ID.value; I't doesn't return the Years for the given Org_id when using the above query. But if i replace "Organisation_Name_ID.value" with the actual value ie. "2" it returns the correct years. How to do?

  Read the article

• Can Excel sorts be saved and used again?

  - by Robert Kerr

  On an Excel 2007 worksheet, I have several tables, each sharing the same columns. For every table, I sort in several particular ways, depending on the task at hand. It gets tedious going to the Data tab, clicking Sort, unchecking the "my data has headers" checkbox, then add/removing the columns and ordering sort criteria. Is it possible to: * Save a given sort criteria (a named sort)? * Apply the sort against any selected range? * Create a button to execute each saved sort? In the end, I would create 4 or 5 named sorts and a button for each on the worksheet. Then would be able to select any range of rows, from any table, and click one of the sort buttons. The sort would execute.

  Read the article

< Previous Page | 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307  | Next Page >