Search Results

Search found 4316 results on 173 pages for 'disabled'.

Page 131/173 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

• Routing table on Linux not respected

  - by MRHaarmann

  I have a very specific problem, building a Linux VPN endpoint (with external VPN Gateway), which should route certain networks over the tunnel, others via default gateway. The Linux VPN should do a NAT on the outgoing connections for the VPN peers. Setup is as following: Internet gateway LAN 192.168.25.1/24 VPN Gateway LAN 10.45.99.2/24 (VPN tunnel 10.45.99.1 to net 87.115.17.40/29, separate connection to Internet) Linux VPN Router eth0 192.168.25.71/24 eth0:503 10.45.99.1/24 Default 192.168.25.1 route to 87.115.17.40/29 via 10.45.99.2 (send_redirects disabled, ip_forward enabled) Linux clients (multiple): eth0 192.168.25.x/24 Default 192.168.25.1 route to 87.115.17.40/29 via 192.168.25.71 Ping to the machines via tunnel from the VPN Router is working. Now I want to establish a routing from my clients over the VPN gateway and the client packet gets routed to 192.168.25.1 ! traceroute output shows the packets get routed to 192.168.25.71, but then to 192.168.25.1. So the route is not respected in forward ! IPTables and Routing: ip route show 87.115.17.40/29 via 10.45.99.2 dev eth0 10.45.99.0/24 dev eth0 proto kernel scope link src 10.45.99.1 192.168.25.0/24 dev eth0 proto kernel scope link src 192.168.25.71 default via 192.168.25.1 dev eth0 iptables -A INPUT -i eth0:503 -j REJECT iptables -t nat -A POSTROUTING -o eth0:503 -j MASQUERADE iptables -A FORWARD -i eth0:503 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 192.168.25.0/24 -o eth0:503 -j ACCEPT So what is wrong with my setup ? The route is chosen correctly from localhost, but all the clients get forwarded to the Internet GW. thanks for helping, Marcus

  Read the article

• Laptop Randomly Turning On and Off

  - by Ian Mallett

  So, I have a pretty new laptop, and one of its quirks is that, at random times (though typically in the middle of the night), it seems to wake up from sleep mode, churn a bit, and then go back into sleep mode. I write "seems" because its fans are very loud, so it's obvious when it's not asleep, but during the time it is "on", I can't see anything on the screen. I have researched the problem somewhat, and could only find similar issues; nothing identical. In those cases, it appeared that certain devices could be responsible. Nothing is plugged into my computer during this behavior, but I nonetheless disabled every device's permission to wake the computer through the device manager. This included disabling the magic packet wake for the network (despite its only having a wireless connection). Using "powercfg /lastwake" gives an empty wake history. But, I also went through all the tasks and checked if they would wake the computer. None appeared to. The problem persisted, so, after some more research, I found this, and executed it for all power schemes on the computer. The problem persists. System: OS: Windows 7 Professional CPU: Intel 990X GPU: NVIDIA GeForce 580M/12GB RAM Motherboard: Clevo X7200 Model: NP7282-S1 (Sager-built laptop)

  Read the article

• Amazon EC2 Nat Instance - goes out but not back in

  - by nocode

  I've followed Amazon's steps and list what I've done. I've created 6 subnets (4 private SN1: 10.50.1.0/24, SN2: 10.50.2.0/24, SN3: 10.50.3.0/24, SN4: 10.50.4.0/24) and 2 public (SN5: 10.50.101.0/24 and SN6: 10.50.102.0/24) -I have a Bastion host and a NAT instance on SN5 and assigned EIP's to both. I created a test instance on SN1. edit: -NAT instance has source/destination check disabled -On the NAT instance, I had enabled the following commands to be bootstrapped: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 10.0.0.0/16 -j MASQUERADE -In my VPC, the private subnets have their own route table and configured 0.0.0.0/0 to the NAT instance with 4 subnets being associated with the route table. I have a second route table for my public subnets and 0.0.0.0/16 is pointed towards the IGW (with the other 2 subnets associated with it). -For Security Groups, I have the NAT instance accepting all traffic on each of the 4 subnets and all OUTBOUND traffic is allowed. For my test server, I have allowed all outbound access and have allowed all traffic from the public subnet of the NAT host. I can ping internally with no issues. On my test instance, if I try to ping google.com, DNS resolves however I don't get a reply back. On my NAT instance, I run a tcpdump and can see the request being requested to google.com but it's not sending the reply back. My NAT host can ping and receive a reply from google. From the test host, when I ping the NAT instance, the tcpdump shows a request and receive. Is there something I'm missing? EDIT: I've figured it out - I had to save the iptable config and restart the service.

  Read the article

• Seemingly random network connectivity.

  - by AngryHacker

  This has been driving me nuts for a while. When I turn on the PC (which has a wired Ethernet connection), it cannot be accessed by other computers on the network. In other words, inbound connections do not work. The firewall is disabled. The PC itself can hit up anything it wants just fine. By process of elimination, I've figured out that checking or unchecking the Eaclift driver in the properties for my network connection restored the inbound connection. I do not know what Eaclift driver is or does or how it even got on my PC (e.g. I am not allowed to uninstall it either). And it does not matter whether it's on or off - I just need to toggle it to restore connectivity. One other thing that happens when I toggle the Eaclift driver, is than an Internet Connection icon appears in the Network Connections and it was not there before. Can someone shed some light as to what is going on? How to fix it so that I don't have to deal with this insanity?

  Read the article

• AMD Phenom II X2 555 BE, core unlock suddenly not working?

  - by user328271

  I've had a Phenom II X2 555 BE for around 2 - 3 years. When I got it, I immediately core unlocked it with my ECS A880GM-A3 mobo, which makes it turn into a Phenom II X4 B55. A few days ago, I installed Windows 7 64 bit to compensate for my 4 gigs of ram. When I start my system with its cores unlocked, it will restart after the BIOS screen. If I disable the core unlock, it boots to OS just fine. My question is: Does 64 bit OS makes a difference in core unlocking? Does my 3rd and 4th core burnt out? Also extra info: I tried core unlocking but keeping the 3rd and 4th core disabled and it still won't boot into OS. Could it be motherboard problems? Sorry for bad English. I will try to give additional information if needed. Thanks! Also it is worth mentioning I'm no computer expert but I tried to make my explanation as short as possible. I also asked my question on TomsHardware, but I had no answer till now so I decided to ask here too. anyone...?

  Read the article

• Certificates required for WHQL-certified drivers

  - by Kasius

  The 64-bit Windows 7 image that we deploy to machines at our site does not contain all of the certificates included on a default Windows image. Automatic root certificate installation is also disabled per policy from higher in the organization. We have had a lot of trouble installing many WHQL-certified drivers from reputable companies (ex. HP, Lexmark, Dell, etc.), and I hypothesize that a required certificate is missing from one of the certificate stores on the machine. The error we typically get is: The driver cannot be installed because it is either not digitally signed or not signed in the appropriate manner. I know that it is signed. A .CAT file is included, and it has the following tree from top to bottom: Microsoft Root Authority (thumbprint a4 34 89 15 9a 52 0f 0d 93 d0 32 cc af 37 e7 fe 20 a8 b4 19) Microsoft Windows Hardware Compatibility PCA (thumbprint 93 b8 d8 82 0a 32 db 20 a5 ea b6 8d 86 ad 67 8e fa 14 ea 41) Microsoft Windows Hardware Compatibility Publisher (thumprint b0 50 45 45 42 4e be 2c 16 2f 62 5b bf 5a e6 9b 96 bf 0b 0b) What certificates are required to install WHQL-certified drivers? Is it possibly something other than certificates? Thanks! NOTE: I have posted this question on Technet as well, but honestly, I've never had a lot of luck posting questions on the Technet forums.

  Read the article

• Set up multiple websites on a local web server

  - by mickburkejnr

  I have spent the last few days setting up a CentOS 6 server on my local network so that I can host multiple projects that I'm currently working on. Everything has been set up so that I access the server by typing 192.168.1.10 and the Apache test page comes up. What I'm aiming to do is to access different projects by typing in 192.168.1.10/project, and then view the project as if it was on it's own standalone server. I have thought about just sticking these sites inside folders on the server then accessing them that way, but a lot of my projects use CakePHP so this isn't feasible. So what I need to do is create VirtualHosts in Apache to allow me to do this, but without using a domain name. I want to stick to using the IP address of the machine (which is static). Any ideas? EDIT I've followed Peter's suggestion, but now I have a new problem. In the httpd.conf file I have entered the following information: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /www/html/project1 ServerName local.project1.com ErrorLog logs/local.project1.com-error_log CustomLog logs/local.project1.com-access_log common </VirtualHost> And now Apache is saying: Starting httpd: Warning: DocumentRoot [/www/html/project1] does not exist When it clearly does exist. I've disabled SELinux and I can confirm this isn't turned on. I've also checked the ownership of the folder, and its owned by root. I can also save files to these folders using a guest FTP account (which isn't associated to root), so the folders are being listed and can be written to. But when I try the folder in a web browser it doesn't seem to work either. I've also done a reboot of the server and the problem persists. What should I change in order to resolve this?

  Read the article

• What could cause an 101 Error in WAMP under Windows 7 ?

  - by Brayn

  Hey, I'be been using WAMP for local development for quite a while now but lately I've been getting an Error 101 message when I browse localhost sites. It's possible for this to have appeared after the last WAMP update but I'm not 100% sure on this. If I try again and again, after several page refreshes it works but it's really annoying! The exact error message is: Error 101 (net::ERR_CONNECTION_RESET): Unknown error. This is my configuration: OS: Windows 7 Apache: 2.2.11 PHP: 5.2.9-2 WAMP: 2.0 Also the local scripts connect to a remote MySQL server, they don't use the local MySQL(I don't know if it matters, just though I let you know). I've been looking into the apache logs and I've found the following. It seems that the apache server keeps restarting and I can't figure why: [Wed Oct 14 13:52:30 2009] [notice] Parent: child process exited with status 255 -- Restarting. [Wed Oct 14 13:52:30 2009] [notice] Apache/2.2.11 (Win32) PHP/5.2.9-2 configured -- resuming normal operations [Wed Oct 14 13:52:30 2009] [notice] Server built: Dec 10 2008 00:10:06 [Wed Oct 14 13:52:30 2009] [notice] Parent: Created child process 6784 [Wed Oct 14 13:52:31 2009] [notice] Child 6784: Child process is running [Wed Oct 14 13:52:31 2009] [notice] Child 6784: Acquired the start mutex. [Wed Oct 14 13:52:31 2009] [notice] Child 6784: Starting 64 worker threads. [Wed Oct 14 13:52:31 2009] [notice] Child 6784: Starting thread to listen on port 80. [Wed Oct 14 13:52:32 2009] [notice] Parent: child process exited with status 255 -- Restarting. [Wed Oct 14 13:52:33 2009] [notice] Apache/2.2.11 (Win32) PHP/5.2.9-2 configured -- resuming normal operations [Wed Oct 14 13:52:33 2009] [notice] Server built: Dec 10 2008 00:10:06 [Wed Oct 14 13:52:33 2009] [notice] Parent: Created child process 3572 [Wed Oct 14 13:52:33 2009] [notice] Child 3572: Child process is running [Wed Oct 14 13:52:33 2009] [notice] Child 3572: Acquired the start mutex. [Wed Oct 14 13:52:33 2009] [notice] Child 3572: Starting 64 worker threads. [Wed Oct 14 13:52:33 2009] [notice] Child 3572: Starting thread to listen on port 80. Also I've checked Windows Firewall and disabled any other protection that I have on this computer with no improvement. Thanks!

  Read the article

• Intermittent Trouble Entering Hibernate on WinXP

  - by kquinn

  My personal desktop, running 32-bit Windows XP SP2 (with 4GB RAM, 2.75GB addressable, swap disabled, hiberfil.sys existing and contiguous on C:\; SP3 is not installed because SP2 has been working fine and I do not want to re-qualify with SP3 just for sheer perversity) typically gets hibernated at night. For a long time this worked great, but recently the machine has had trouble entering hibernation. Sometimes when I press my power button (configured to hibernate), the box will start the procedure for hibernating (i.e., go to the blue "Windows XP" background logo and display a message about entering hibernation), but before displaying the usual blue-on-black hibernation progress bar it will drop back to the desktop. No error messages appear, on screen or in the system log. The only record of unsuccessful hibernation attempts in the system log, which proudly proclaims that "The Windows Image Acquisition (WIA) service entered the running state." once per failed hibernation attempt. The problem is almost certainly resource related: if I then close one or more applications which are running, and repeat the exact same process, the machine will hibernate perfectly. There does not appear to be a reliable high-water mark for virtual or physical memory use, below which the machine is guaranteed to hibernate; it's different every time (though typically, below about 1.1–1.4 GB memory usage seems to be where hibernate succeeds most often). Memory may not even be the relevant resource; as far as I know, it could also be handles or sockets. This behavior is relatively recent: it has only started in the last few months; before then, I could hibernate reliably no matter what the current resource use of the system. This machine claims to have hotfix Q909095 installed, but since the symptoms of my problem match KB909095 rather well, I'm suspicious if this fix is actually working as intended. Any ideas on how to fix this or where to start debugging?

  Read the article

• Change Windows Authentication user for Sql Server Management Studio

  - by Asmor

  We're using Sql Server 2005 with Windows Authentication setup. So normally, when you log in using e.g. Sql Server Management Studio, it forces you to log in at MACHINE_NAME\Username. Anyways, on this one particular computer, the person said they had to make a new account called User01 to do something and showed me where she'd created it under security in the "master" system database. And so now when she logs in, it's listed as MACHINE_NAME\User01 (not the actual Windows user name). It's still set to Windows Authentication, though, and I'm unable to change the login name. Now here's where the real problem comes in... I didn't realize that she was being logged in under this user name at the time, and I disabled it to see what would happen. Now I can't log into the server under her account. I created a new account in Windows called test, and as expected SSMS had the username as MACHINE_NAME\test, and I was able to log in fine. However, the area where the User01 account was listed is not visible to me as far as I can tell and so I can't reenable it. I also tried running the following query: alter login User01 ENABLE And got this error: Msg 15151, Level 16, State 1, Line 1 Cannot alter the login 'User01', because it does not exist or you do not have permission. So in a nutshell, ideally I'd like to reenable User01 somehow, just to get things back to where they used to be. Failing that, how can I force SSMS to log in using the Windows account name as it should be, rather than trying to use User01?

  Read the article

• Network connection keeps dropping - bad hardware?

  - by Bill Sambrone

  Hello all, I've into a bit of a wall with a client of mine. In an office of 20 people, he is the only one who experiences broken connections to his mapped network drives. I have everyone set up with about 6 mapped drives, all pointing to the same server (no DFS), and everyone else can access them lightning fast. The environment consists of a mix of Windows 7 and XP machines, all 32-bit. The server holding the data everyone is mapping to is running on Server 2008 R2, and is a domain controller. We recently swapped out their old 10/100 switch for a shiny new Dell PowerConnect gigabit switch. We have also replaced an old dying Sonicwall with a shiny new one. Everything is running on an ESX host except for the DC, where everyone is getting data from. In my client's office, we have done the following: Swapped out his computer (Win7 and XP box) Swapped out the desktop switch in his office Removed the desktop switch in his office Changed out the network cable going to the wall Ran 'net config server /autodisconnect:-1' on the server Disabled remote differential compression on his current Win7 box When we swapped out his network cable, everything seemed fine for about 4 days. Normally I would get a phone call a couple times per day letting me know that Outlook has crashed (there is a 9GB PST living on the server he is always connected to), or that his software he is running from his L drive has crashed. I almost thought I had this solved, but after we rebooted the DC the other night he all of a sudden couldn't stay connected to his mapped network drives for more than 10 minutes. When I ran 'net use' from the command prompt, it listed all the network drives where were randomly in a state of 'OK', 'Disconnected', or 'Reconnecting'. What else should I try? Maybe there is bad wiring in the wall, patch panel, or a bad port in the new switch I have in the server room?

  Read the article

• HP DL185 - very slow disk read speed

  - by fistameeny

  Hi, I have a HP DL185 G6 Server (12 disk model) with the following spec: Quad Core Xeon 2.27GHz 6GB RAM HP P212 RAID controller with battery backup 2 x 128GB 15K SAS 3.5" (RAID-1 for the operating system) 4 x 750GB 7.5K SAS 3.5" (RAID-5 for the data, 2TB usable space) The operating system is Ubuntu Server 9.10. Both drives have been formatted as EXT4. We are finding that read speed of the RAID-5 array is poor. Disk test results below: sudo hdparm -tT /dev/cciss/c0d1p1 /dev/cciss/c0d1p1: Timing cached reads: 15284 MB in 2.00 seconds = 7650.18 MB/sec Timing buffered disk reads: 74 MB in 3.02 seconds = 24.53 MB/sec For info, the RAID-1 array performs as follows: sudo hdparm -tT /dev/cciss/c0d0p1 /dev/cciss/c0d0p1: Timing cached reads: 15652 MB in 2.00 seconds = 7834.26 MB/sec Timing buffered disk reads: 492 MB in 3.01 seconds = 163.46 MB/sec We thought this was because with no battery, read/write cache is disabled. We have bought and installed the battery backup and have used the HP bootable CD to change the cache settings to 50% read / 50% write and check cache is enabled on the drives and the controller. Is there something I'm missing?

  Read the article

• Very Slow DSL (ethernet) speed

  - by Abhijit

  I 'was' on opensuse 12.2 when my dsl speed was normal. Yesterday I switched from opensuse to ubuntu 12.04 and speed decreased. It came to range of 7-10-13-20-25-kbps. Then I switch to linux mint, and then to fedora. Still slow speed. When I was in ubuntu I disabled ipv6 but still no luck. Now I am in fedora but this time with DIFFERENT ISP. And still I am getting very slow sped. So my guess is this is nothing to do with os. What can be wrong? Is this problem of NIC? Does NIC speed decreases over time? Does NIC life ends over time as with keyboard or mouse? Help please All the os I used are 64 bit and my laptop is Compaq Presario A965Tu Intel Centrino DUal Core. Interesting thing to notice is I get normal speed while downloading torrent inside torrent client softwares. This slow speed issue applied to download from any web browser or installing software using terminal.

  Read the article

• Should I expect ICMP transit traffic to show up when using debug ip packet with a mask on a Cisco IOS router?

  - by David Bullock

  So I am trying to trace an ICMP conversation between 192.168.100.230/32 an EZVPN interface (Virtual-Access 3) and 192.168.100.20 on BVI4. # sh ip access-lists 199 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 # sh debug Generic IP: IP packet debugging is on for access list 199 # sh ip route | incl 192.168.100 192.168.100.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.100.0/24 is directly connected, BVI4 S 192.168.100.230/32 [1/0] via x.x.x.x, Virtual-Access3 # sh log | inc Buff Buffer logging: level debugging, 2145 messages logged, xml disabled, Log Buffer (16384 bytes): OK, so from my EZVPN client with IP address 192.168.100.230, I ping 192.168.100.20. I know the packet reaches the router across the VPN tunnel, because: policy exists on zp vpn-to-in Zone-pair: vpn-to-in Service-policy inspect : acl-based-policy Class-map: desired-traffic (match-all) Match: access-group name my-acl Inspect Number of Half-open Sessions = 1 Half-open Sessions Session 84DB9D60 (192.168.100.230:8)=>(192.168.100.20:0) icmp SIS_OPENING Created 00:00:05, Last heard 00:00:00 ECHO request Bytes sent (initiator:responder) [64:0] Class-map: class-default (match-any) Match: any Drop 176 packets, 12961 bytes But I get no debug log, and the debugging ACL hasn't matched: # sh log | inc IP: # # sh ip access-lists 198 Extended IP access list 198 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 Am I going crazy, or should I not expect to see this debug log? Thanks!

  Read the article

• OS X superuser folders automatically created. Perusers launchd process appears to kill 501

  - by Ric Pen

  New Apple laptop OSX 10.8.2. I have used OS X but many years previously, and am not familiar with subtleties or changes in com.apple.launchd.peruser.x... I have previously (and in retrospect, foolishly) made changes to these rapidly spawned new peruser accounts (my initial reaction was that if ipfw was disabled, then I might well be under hacker attack, which I have dealt with, years ago), but I believe I was wrong, and the results of my efforts at preserving the system's integrity have in fact been destructive, overreactive, and have resulted in much work to restore. My understanding from other posts is that superuser protocols have changed quite dramatically since I bought the first developer version of OS X many years ago. Haven't developed on Apple much since then, w/ exception of WebObjects (IMO, much underrated at that time, and was more user friendly than ASP (prior to .NET, I vaguely recall). Creation of apparently nasty peruser folders appear to confound 501 process, which logs inability to find firewall (ipfw). Can someone help me with this? I am concerned that either the system is improperly configured, an application was improperly installed (although there is little here beyond Apple's SDK, which I find quite accommodating and intuitive). Still, I am a novice, only sporadically develop at this time, and would really just like to see this system running happily. Please offer assistance, in the form of potential info sources, or if you have had a similar experience, then perhaps scripts to suss out this issue. I do not wish to damage the system, but Apple's Developer connection and discussion threads do not appear to have dealt with this particular issue recently... Although I may well have missed something you have not - please apprise. Any assistance on this issue is very much appreciated - by an old guy, who wants to do some things which were fun about 20 years ago.

  Read the article

• Can't install mysql 5.1 on a windows machine because the last install left artifacts.

  - by Zombies

  After uninstalling mysql 5.1 (64 bit version) I cannot install the win32 version! Apparently the devs felt it neccasery to leave helpful artifacts behind? I have rebooted my machine but no effect.. Running this: C:\Users\User1>net start mysql The MySQL service is starting. The MySQL service could not be started. A system error has occurred. System error 1067 has occurred. The process terminated unexpectedly. And ran this: C:\Program Files (x86)\MySQL\MySQL Server 5.1\bin>mysqld --console 100213 10:52:58 [Note] Plugin 'FEDERATED' is disabled. InnoDB: Error: log file .\ib_logfile0 is of different size 0 10485760 bytes InnoDB: than specified in the .cnf file 0 25165824 bytes! 100213 10:52:59 [ERROR] Plugin 'InnoDB' init function returned error. 100213 10:52:59 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 100213 10:52:59 [ERROR] Unknown/unsupported table type: INNODB 100213 10:52:59 [ERROR] Aborting 100213 10:52:59 [Note] mysqld: Shutdown complete Update: For some reason it looks like it is installing the 32bit DB into the old 64bit directoy.... will look into this... (the bin directory is going into the 32 bit program files directory).

  Read the article

• Server 2003 and XP Client; Why are HTTP connections being silently dropped.

  - by Asa Yeamans

  On my network, my edge-router, a windows 2003 r2 server router with all the latest updates, will drop packets, but only under specific circumstances. I have troubleshot and isolated it down to the most simple configuration i can. There is NO NAT involved. Only fully-public IP addresses. No Firewalls are running either, all ahve been disabled. no packet filters on any interfaces anywhere either. I have a single Windows XP virtual machine and my edge-router(the windows 2003 r2 server, and also a virtual machine) running on a windows 2008 x64 r2 system (running virtual server 2005 as i dont have Intel-VT compatible chip yet). The edge router can access any external http site just fine, no issues. However the windows XP machine is only able to access certain sites. These work: www.google.com www.txstate.edu www.workintexas.com www.thedailywtf.com . These Dont: www.yahoo.com www.utexas.edu en.wikipedia.org slashdot.org www.bing.com. I have removed all possibility of DNS issues by connecting with net-cat from the XP box and sending GET /\r\nHost: \r\n\r\n and that connection replicates the issue as well. The network setup: My statically assigned IP block: x.x.x.168/29 DSL Modem -----PPPoE Connection---- x.x.x.169[EdgeRouter] [EdgeRouter]x.x.x.170 -----Virtual Ethernet----- x.x.x.174 [Test2] Test2's Default gateway is x.x.x.170 and test2 can ping any and every valid, accessible, public IP address with no packet loss what-so-ever. If i connect directly over PPPoE from test2 (the XP box) everything works just fine... Im at my wits end, i have NO IDEA whats causing this.

  Read the article

• Is there a way to prevent password expiration when user has no password?

  - by Eric DANNIELOU

  Okay, we all care about security so users should change their passwords on a regular basis (who said passwords are like underwear?). On redhat and centos (5.x and 6.x), it's possible to make every real user password expires after 45 days, and warn them 7 days before. /etc/shadow entry then looks like : testuser:$6$m8VQ7BWU$b3UBovxC5b9p2UxLxyT0QKKgG1RoOHoap2CV7HviDJ03AUvcFTqB.yiV4Dn7Rj6LgCBsJ1.obQpaLVCx5.Sx90:15588:1:45:7::: It works very well and most users often change their passwords. Some users find it convenient not to use any password but ssh public key (and I'd like to encourage them). Then after 45 days they can't log in as they forgot their password and are asked to change it. Is there a way to prevent password expiration if and only if password is disabled? Setting testuser:!!:15588:1:45:7::: in /etc/shadow did not work : testuser is asked to change his password after 45 days. Of course, setting back password expiration to 99999 days works but : It requires extra work. Security auditors might not be happy. Is there a system wide parameter that would prompt the user to change expired password only if he really has one ?

  Read the article

• Weirdly high ping on direct ethernet connection?

  - by Antriel

  I bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms. I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms. I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN). Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't help. I tested it in the safe mode with networking, same problem there. It slows down our client-server based programs and I have no idea what's causing it. All I could google up was that disabling Interrupt Moderation would help, it didn't though. Anyone had similar problems? tl;nr: Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.

  Read the article

• EventID 1058 Code 5, Sysvol is subdir of Sysvol - how to fix?

  - by nulliusinverba

  I have been trying to resolve this error, like many others: The processing of Group Policy failed. Windows attempted to read the file \domain.local\SysVol\domain.local\Policies{3EF90CE1-6908-44EC-A750-F0BA70548600}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following: a) Name Resolution/Network Connectivity to the current domain controller. b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller). c) The Distributed File System (DFS) client has been disabled. Error code: 5 = Access Denied. The incredibly helpful post is this one (http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/2003_Server/A_1073-Diagnosing-and-repairing-Events-1030-and-1058.html). Quoting from this post: HERE IS A LIST OF POTENTIAL PROBLEMS THAT CAN LEAD TO 1030 AND 1058 EVENT ERRORS: --Sometimes the permissions of the file folders that contain Group policies (the Sysvol folder) can be corrupted. --Sometimes you have problems with NetBIOS: --Sometimes the GPO itself is corrupt, or you have a partial set of data for that GPO. --Sometimes you may have problems with File Replication Services, which almost always indicates a problem with DNS --Sysvol may be a subfolder of itself: Sysvol/Sysvol I have the problem listed where sysvol is a subfolder of sysvol. The directory structure is: -sysvol -domain -staging -staging areas -sysvol (shared as "\\server\sysvol") -domain.local -ClientAgent -Policies -scripts Interestingly, the second sysvol folder is the one that is shared as "\server\sysvol". This makes me confident this is the issue with the permissions and error code 5. Also interestingly, my server 2008 R2 servers can see it fine - my server 2008 servers cannot, and get the error. This is consistent across all my servers. This latter fact makes me uncertain what I need to do to fix this up. Do I, e.g., simply move the shared sysvol folder up a level to replace the non-shared one? Any help greatly appreciated. Cheers, Tim.

  Read the article

• Anonymous file sharing without login window, from Windows 7 server to XP clients

  - by Niten

  I'm trying to provide machines on a small LAN with read-only, anonymous access to files shared from a Windows 7 workstation (let's call it WIN7SVR). In particular, I don't want clients to have to deal with a login window when they navigate to, e.g., \\WIN7SVR in Windows Explorer, but we do not have a domain and synchronizing accounts between the server and clients would be intractable. There are both Windows 7 and Windows XP clients that need access to these shares. I got this working for Windows 7 clients by just enabling the Guest account on WIN7SVR and setting appropriate share permissions. Other Windows 7 machines automatically try logging in as Guest, it seems, so their users don't have to deal with the login window. The problem is with the XP clients--they can access the server if the user enters "Guest" in the login window, but I don't want users to have to do that. So from what I gather, in my limited understanding of Windows file sharing, this boils down to granting null sessions access to file shares on WIN7SVR. But I've had no success so far on that front. I've tried all the following in the local group policy editor on the Windows 7 server: Set Network access: Let Everyone permissions apply to anonymous users to Enabled Set Network access: Restrict anonymous access to Named Pipes and Shares to Disabled Added the names of corresponding shares to Network access: Shares that can be accessed anonymously Added "ANONYMOUS LOGON" to Access this computer from the network under User Rights Assignment Any advice would be highly appreciated... I'm mostly a Unix guy, so I feel somewhat out of my league with Windows file sharing. I do understand that any sort of anonymous access to file shares isn't generally ideal from a security standpoint, but it's the most practical solution for us in this case, and access to our network is well enough controlled that share-level security isn't a concern.

  Read the article

• I deployed Flash Player via a Software Installation policy. How to upgrade?

  - by eleven81

  I have a Windows Server 2008 machine as my DC. Earlier this year I created a Software Installation GPO to deploy Adobe Flash Player plugin MSI. I assigned the policy to the computers, about half run Windows XP x86 and the other half Windows 7 x64. That all works like clockwork. When I created the Software Installation Policy, I disabled the Flash Player plugin's automatic update feature by editing the MSI in Orca. I did this because I wanted all of my machines to run the exact same version of the plugin. Now, some time has passed and a newer version of the Flash Player plugin has been released. It is time for me to push out the updated version of the plugin. I already have the new MSI, but I am lost on what to do next. I see the upgrades tab in the Software Installation GPO, but everything there reads like that would be used for add-ons to a larger master program and not for updates that are released over time. I have read that it is best to create a new Software Installation policy with the new MSI, revoke the old GPO, and assign the new GPO. I feel as though, over time, I will wind up with more revoked policies than active ones. I have also read that some people have had success by replacing the old MSI with the new MSI and simply telling the GPO to redeploy. This seems like a backdoor method that will only get me in to trouble. In short, what is the correct, best-practice, or preferred way to roll out the new version via Group Policy?

  Read the article

• Orphaned SQL Recordsets/Connections with IIS

  - by Damian

  I have an IIS 6 site running on Windows 2003 Server x86 with MS SQL2005 Enterprise edition running ASP Classic (no choice). The site runs very fast with about 8000 page views per hour. All of my SQL tables are indexed and I have used the profiler to check my queries, the slowest of which is only about 10-15ms. I have autoshrink disabled, autogrow is set to 250mb, database is 2gb with 800mb of free space. My problem is that every now and then the site will slow to a crawl for no reason. Pages that just have a simple 'connect to databse and increment a hit counter' work ok, but more SQL intensive pages that normally execute in about 60ms take 25,000ms to run. This happens for about 30 seconds and then goes away. I was having an issue with orphan recordsets and connections due to the way I was releasing them. I have fixed this up and the issue is much better, but I am still getting them. Is there a way with permon, etc. to track when SQL Server or Windows closes these Orphan connections? At least if I can monitor the issue I will know if I am making progress or if I am even looking at the right things. Is there anything else I might be missing? Thank you!

  Read the article

• No LAN and SMB access, and Explorer not responsive, when using a second connection

  - by Lorenzo

  I apologize if this is a duplicate question, I know that there are several questions about multiple connection (LAN + LAN and LAN + dialup) but I haven't been able to find one that fits my scenario. I'm still using Windows XP on my corporate laptop, and I'm connected to the corporate LAN via Ethernet. The LAN NIC has a public IP address, although not accessible externally, obtained via the corporate DNS server. This connection is firewalled and requires a proxy to access Internet. To access Internet sites blocked by the corporate firewall, I use my smartphone via USB tethering. It is seen as a new LAN interface, and I get a private IP address (class 192.168..). There are two problems: The LAN is not accessible, as the default gateway goes to the tethering NIC. I'd like to solve this, but I can live with it. My PC becomes unresponsive if I use Windows Explorer to view local files, or even when I open the start menu. I guess that this is caused by attemps to connect to a mapped network drive. But I disabled the "Client for Microsoft Networks" in the tethering NIC. Why the system still hangs? Of course if I disable the Ethernet NIC, Explorer stops hanging. If you need further details, add a comment. Thanks!

  Read the article

• What kind of server attacks should i be aware of nowadays

  - by Saif Bechan

  I am recently running a web server, and there is a lot of information online, but it can all be a little confusing. I recently opened my logwatch logs and saw that i get attacked a lot by all sorts of bots. Now I am interested in a list with things I definitely should be aware of nowadays, and possible ways to prevent them. I have read stories about server crashed by floods, crashed by email, and all sorts of crazy stuff. Thing I already did: I have recently blocked all my ports, except for the http and email ports. I disabled IPv6, this was giving me a lot of named errors I have turned on spam DNS blackhole lists to fight spam - sbl.spamhaus.org; - zen.spamhaus.org; - b.barracudacentral.org; I installed and configured mod_security2 on apache There is no remote access possible to my databases That is all i did so far, further I am not aware of any other threats. I want to know if the following things have to be protects. Can I be flooded by emails. How can i prevent this Can there be a break in or flood of my databses Are there things like http floods or whatever Are there any other things i should know before i go public with my server I also want to know if there is some kind of checklist with must-have security protections. I know the OWASP list for writing good web applications, is there something for configuring a server.

  Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >